summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--converter/ps2_usb/Makefile42
-rw-r--r--converter/ps2_usb/Makefile.jis (renamed from converter/ps2_usb/Makefile.pjrc_usart)42
-rw-r--r--converter/ps2_usb/Makefile.vusb16
-rw-r--r--converter/ps2_usb/README116
-rw-r--r--converter/ps2_usb/README.vusb37
-rw-r--r--converter/ps2_usb/config.h (renamed from converter/ps2_usb/config_vusb.h)107
-rw-r--r--converter/ps2_usb/config_pjrc.h59
-rw-r--r--converter/ps2_usb/config_pjrc_usart.h91
-rw-r--r--converter/ps2_usb/keymap_jis.c297
-rw-r--r--converter/ps2_usb/usbconfig.h1
-rw-r--r--protocol/ps2.c15
11 files changed, 503 insertions, 320 deletions
diff --git a/converter/ps2_usb/Makefile b/converter/ps2_usb/Makefile
index 1278a74be7..0c6442374c 100644
--- a/converter/ps2_usb/Makefile
+++ b/converter/ps2_usb/Makefile
@@ -1,10 +1,5 @@
-#
-# Makefile for PJRC Teensy
-#
-
-
# Target file name (without extension).
-TARGET = ps2_usb_pjrc
+TARGET = ps2_usb
# Directory common source filess exist
TOP_DIR = ../..
@@ -12,14 +7,6 @@ TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
-# keyboard dependent files
-SRC = keymap.c \
- matrix.c \
- led.c \
- ps2.c
-
-CONFIG_H = config_pjrc.h
-
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
@@ -44,6 +31,33 @@ MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
NKRO_ENABLE = yes # USB Nkey Rollover
+PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
+#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
+#PS2_USE_BUSYWAIT = yes # uses primitive reference code
+
+
+# keyboard dependent files
+SRC = keymap.c \
+ matrix.c \
+ led.c
+
+
+ifdef PS2_USE_USART
+ SRC += protocol/ps2_usart.c
+ OPT_DEFS += -DPS2_USE_USART
+endif
+ifdef PS2_USE_INT
+ SRC += protocol/ps2.c
+ OPT_DEFS += -DPS2_USE_INT
+endif
+ifdef PS2_USE_BUSYWAIT
+ SRC += protocol/ps2.c
+ OPT_DEFS += -DPS2_USE_BUSYWAIT
+endif
+
+
+#CONFIG_H = config_pjrc_usart.h
+CONFIG_H = config.h
#---------------- Programming Options --------------------------
diff --git a/converter/ps2_usb/Makefile.pjrc_usart b/converter/ps2_usb/Makefile.jis
index dd74712e48..4e091e8e2d 100644
--- a/converter/ps2_usb/Makefile.pjrc_usart
+++ b/converter/ps2_usb/Makefile.jis
@@ -1,10 +1,5 @@
-#
-# Makefile for PJRC Teensy
-#
-
-
# Target file name (without extension).
-TARGET = ps2_usb_pjrc_usart
+TARGET = ps2_usb_jis
# Directory common source filess exist
TOP_DIR = ../..
@@ -12,14 +7,6 @@ TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
-# keyboard dependent files
-SRC = keymap.c \
- matrix.c \
- led.c \
- ps2_usart.c
-
-CONFIG_H = config_pjrc_usart.h
-
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
@@ -44,6 +31,33 @@ MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
NKRO_ENABLE = yes # USB Nkey Rollover
+#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
+#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
+PS2_USE_BUSYWAIT = yes # uses primitive reference code
+
+
+# keyboard dependent files
+SRC = keymap_jis.c \
+ matrix.c \
+ led.c
+
+
+ifdef PS2_USE_USART
+ SRC += protocol/ps2_usart.c
+ OPT_DEFS += -DPS2_USE_USART
+endif
+ifdef PS2_USE_INT
+ SRC += protocol/ps2.c
+ OPT_DEFS += -DPS2_USE_INT
+endif
+ifdef PS2_USE_BUSYWAIT
+ SRC += protocol/ps2.c
+ OPT_DEFS += -DPS2_USE_BUSYWAIT
+endif
+
+
+#CONFIG_H = config_pjrc_usart.h
+CONFIG_H = config.h
#---------------- Programming Options --------------------------
diff --git a/converter/ps2_usb/Makefile.vusb b/converter/ps2_usb/Makefile.vusb
index b08d30d574..d449e1e40f 100644
--- a/converter/ps2_usb/Makefile.vusb
+++ b/converter/ps2_usb/Makefile.vusb
@@ -1,8 +1,3 @@
-#
-# Makefile for V-USB
-#
-
-
# Target file name (without extension).
TARGET = ps2_usb_vusb
@@ -15,15 +10,18 @@ TARGET_DIR = .
# keyboard dependent files
SRC = keymap.c \
matrix.c \
- led.c \
- ps2_usart.c
+ led.c
+
+# Use USART for PS/2. With V-USB INT and BUSYWAIT code is not useful.
+SRC += protocol/ps2_usart.c
+OPT_DEFS += -DPS2_USE_USART
-CONFIG_H = config_vusb.h
+CONFIG_H = config.h
# V-USB debug level: To use ps2_usart.c level must be 0
# ps2_usart.c requires USART to receive PS/2 signal.
-OPT_DEFS = -DDEBUG_LEVEL=0
+OPT_DEFS += -DDEBUG_LEVEL=0
# MCU name, you MUST set this to match the board you are using
diff --git a/converter/ps2_usb/README b/converter/ps2_usb/README
index c10393e5e7..cb7ba55551 100644
--- a/converter/ps2_usb/README
+++ b/converter/ps2_usb/README
@@ -1,7 +1,7 @@
PS/2 to USB keyboard converter
==============================
-This firmware converts PS/2 keyboard protocol to USB and for now supports only Scan Code Set 2.
-This will works on USB AVR(ATMega32U4, AT90USB) or V-USB.
+This firmware converts PS/2 keyboard protocol to USB and supports only Scan Code Set 2.
+This will works on USB AVR(ATMega32U4, AT90USB) or V-USB(ATMega168, 328...).
Features
@@ -19,25 +19,29 @@ Keymap customization
PS/2 signal handling implementations
------------------------------------
Following three methods are used to implement PS/2 signal handling.
-a. Simple and stupid wait & read loop(intensive use of cycles)
- This is implemented with (expected) portable C code for reference. See ps2.c.
-b. Interrupt driven
- See ps2_intr.c
-c. Using USART hardware module(no cycle needed)
- This uses AVR USART function to recevie PS/2 signal and be used in V-USB converter.
- See ps2_usart.c.
-
-
-Build Converter
----------------
-Connect PS/2 keyboard into Teensy with 4 lines(Vcc, GND, Data, Clock).
-For a. Simple and stupid and b. Interrupt implementaion:
- By default Clock is on PF0 and Data on PF1.
- You can change this pin configuration by editing config_pjrc.h.
- In this photo Vcc is yellow, GND is green, Data is red and Clock is black.
- http://img17.imageshack.us/img17/7243/201101181933.jpg
-For c. USART implementation:
- In case of Teensny(ATMega32u4) CLock is on PD5 and Data on PD2.
+a. Simple and stupid busy-wait(ps2.c)
+ This is expected to implemented with portable C code for reference.
+b. Interrupt driven(ps2.c)
+ Uses external interrupt to detect falling edge of clock line.
+c. USART hardware module(ps2_usart.c)
+ Uses AVR USART engine to recevie PS/2 signal. Recomended and default.
+ This is required to work with V-USB, preceding two methods tend to
+ miss signal edges while V-USB handles USB.
+
+To select method edit Makefile.
+
+
+Connect Wires
+-------------
+In case of Teensy2.0(ATMega32U4):
+0. Connect Vcc and GND.
+1. Connect Clock and Data line.
+ For a. Clock is on PF0 and Data on PF1.
+ For b. Clock is on PD1 and Data on PD2.
+ For c. Clock is on PD5 and Data on PD2.
+2. Optionally you need pull-up register. 1K-10K Ohm is OK.
+
+To change pin configuration edit config.h.
Build Frimware
@@ -45,12 +49,12 @@ Build Frimware
1. Edit Makefile for build options and MCU setting.
Use 'atmega32u4' for Teensy 2.0 or 'at90usb1286' for Teensy++ 2.0.
2. make
- Just type 'make' in a terminal.
- Use '-f Makefile.pjrc_intr' option to use b. Interrupt.
- Use '-f Makefile.pjrc_usart' option to use c. USART.
- Use '-f Makefile.vusb' option to build V-USB converter.
-3. program with Teensy Loader.
- http://www.pjrc.com/teensy/loader.html
+ Just type `make` in a terminal.
+ Use `-f Makefile.vusb` option to build V-USB converter.
+ Use `-f Makefile.jis` option to use JIS keyboard.
+3. program MCU.
+ In case of Teensy use `Teensy Loader`.(http://www.pjrc.com/teensy/loader.html)
+ Otherwise you want to use `avrdude` or `dfu-programmer`.
Demonstration of Features
@@ -83,34 +87,36 @@ Fn layer function:
Keymap
------
-You can change a keymap by editing code of keymap.c like following.
-How to define the keymap is probably obvious. You can find key symbols in usb_keycodes.h.
-To define keymap layer switching may needs a bit of your effort at this time.
-
- /* Default Layer: plain keymap
- * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------.
- * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak|
- * `---' `---------------' `---------------' `---------------' `-----------' `-----------'
- * ,-----------------------------------------------------------. ,-----------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -|
- * |-----------------------------------------------------------| |-----------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
- * |-----------------------------------------------------------| `-----------' |-----------| +|
- * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| |
- * |-----------------------------------------------------------| ,---. |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
- * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
- * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| |
- * `-----------------------------------------------------------' `-----------' `---------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
- CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
+You can change a keymap by editing code of keymap. See common/keycode.h for key symbols.
+
+
+V-USB Support
+-------------
+You can also use this converter on ATmega(168/328) with V-USB instead of Teensy.
+The converter on V-USB lacks some features for now: USB NKRO and System/Media control.
+
+Circuit
+-------
+ +---+ +---------------+
+USB GND | | ATmega168 |
+=== C3 | |
+5V <-------+--------+---|Vcc,AVCC | PS/2
+ R1 | | ====
+D- <----+--+-----R2-----|INT1 RXD|------->DATA
+D+ <----|---+----R3-----|INT0 XCK|------->CLOCK
+ Z1 Z2 | | ->5V
+GND<----+---+--+--+-----|GND | ->GND
+ | | | |
+ | C2-+--|XTAL1 |
+ | X1 | |
+ +--C3-+--|XTAL2 |
+ +---------------+
+R1: 1.5K Ohm
+R2,R3: 68 Ohm
+Z1,Z2: Zenner 3.6V
+C1,C2: 22pF
+C3: 0.1uF
+X1: Crystal 20MHz(16MHz/12MHz)
EOF
diff --git a/converter/ps2_usb/README.vusb b/converter/ps2_usb/README.vusb
deleted file mode 100644
index c92871bcdd..0000000000
--- a/converter/ps2_usb/README.vusb
+++ /dev/null
@@ -1,37 +0,0 @@
-V-USB Support
-=============
-You can also use this converter on ATmega(168/328) with V-USB instead of Teensy.
-The converter on V-USB lacks some features for now: USB NKRO and System/Media control.
-
-To build a firmware use Makefile.vusb instead of Makefile.
-
-
-Circuit
--------
- +---+ +---------------+
-USB GND | | ATmega168 |
-=== C3 | |
-5V <-------+--------+---|Vcc,AVCC | PS/2
- R1 | | ====
-D- <----+--+-----R2-----|INT1 RXD|------->DATA
-D+ <----|---+----R3-----|INT0 XCK|------->CLOCK
- Z1 Z2 | | ->5V
-GND<----+---+--+--+-----|GND | ->GND
- | | | |
- | C2-+--|XTAL1 |
- | X1 | |
- +--C3-+--|XTAL2 |
- +---------------+
-R1: 1.5K Ohm
-R2,R3: 68 Ohm
-Z1,Z2: Zenner 3.6V
-C1,C2: 22pF
-C3: 0.1uF
-X1: Crystal 20MHz(16MHz/12MHz)
-
-
-This is my V-USB converter on breadboard.
-[IMG]http://i.imgur.com/8jJCZl.jpg[/IMG]
-
-
-EOF
diff --git a/converter/ps2_usb/config_vusb.h b/converter/ps2_usb/config.h
index afd2f7911f..e5d37e429a 100644
--- a/converter/ps2_usb/config_vusb.h
+++ b/converter/ps2_usb/config.h
@@ -1,5 +1,5 @@
/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
+Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -18,11 +18,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#ifndef CONFIG_H
#define CONFIG_H
+#include <avr/interrupt.h>
+/* controller configuration */
+#include "controller_teensy.h"
#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x2233
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
+#define PRODUCT_ID 0x6512
#define MANUFACTURER t.m.k.
#define PRODUCT PS/2 keyboard converter
#define DESCRIPTION convert PS/2 keyboard to USB
@@ -46,30 +47,62 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#endif
-/* PS/2 lines */
+#ifdef PS2_USE_USART
+#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)
+/* XCK for clock line and RXD for data line */
#define PS2_CLOCK_PORT PORTD
#define PS2_CLOCK_PIN PIND
#define PS2_CLOCK_DDR DDRD
-#define PS2_CLOCK_BIT 4
+#define PS2_CLOCK_BIT 5
#define PS2_DATA_PORT PORTD
#define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD
-#define PS2_DATA_BIT 0
+#define PS2_DATA_BIT 2
+/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
+/* set DDR of CLOCK as input to be slave */
+#define PS2_USART_INIT() do { \
+ PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
+ PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
+ UCSR1C = ((1 << UMSEL10) | \
+ (3 << UPM10) | \
+ (0 << USBS1) | \
+ (3 << UCSZ10) | \
+ (0 << UCPOL1)); \
+ UCSR1A = 0; \
+ UBRR1H = 0; \
+ UBRR1L = 0; \
+} while (0)
+#define PS2_USART_RX_INT_ON() do { \
+ UCSR1B = ((1 << RXCIE1) | \
+ (1 << RXEN1)); \
+} while (0)
+#define PS2_USART_RX_POLL_ON() do { \
+ UCSR1B = (1 << RXEN1); \
+} while (0)
+#define PS2_USART_OFF() do { \
+ UCSR1C = 0; \
+ UCSR1B &= ~((1 << RXEN1) | \
+ (1 << TXEN1)); \
+} while (0)
+#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
+#define PS2_USART_RX_DATA UDR1
+#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
+#define PS2_USART_RX_VECT USART1_RX_vect
-// Synchronous USART is used to receive data from keyboard.
-// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK.
-// NOTE: This is recomended strongly if you use V-USB library.
-#define PS2_USE_USART
-
-// External or Pin Change Interrupt is used to receive data from keyboard.
-// Use INT1 or PCINTxx for PS/2 CLOCK line. see below.
-//#define PS2_USE_INT
-
+#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
+/* XCK for clock line and RXD for data line */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 4
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 0
-#ifdef PS2_USE_USART
-// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge
-// set DDR of CLOCK as input to be slave
+/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
+/* set DDR of CLOCK as input to be slave */
#define PS2_USART_INIT() do { \
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
@@ -99,10 +132,20 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PS2_USART_ERROR (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0)))
#define PS2_USART_RX_VECT USART_RX_vect
#endif
+#endif
#ifdef PS2_USE_INT
-/* INT1
+/* uses INT1 for clock line(ATMega32U4) */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 1
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 2
+
#define PS2_INT_INIT() do { \
EICRA |= ((1<<ISC11) | \
(0<<ISC10)); \
@@ -114,20 +157,18 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
EIMSK &= ~(1<<INT1); \
} while (0)
#define PS2_INT_VECT INT1_vect
-*/
+#endif
-/* PCINT20 */
-#define PS2_INT_INIT() do { \
- PCICR |= (1<<PCIE2); \
-} while (0)
-#define PS2_INT_ON() do { \
- PCMSK2 |= (1<<PCINT20); \
-} while (0)
-#define PS2_INT_OFF() do { \
- PCMSK2 &= ~(1<<PCINT20); \
- PCICR &= ~(1<<PCIE2); \
-} while (0)
-#define PS2_INT_VECT PCINT2_vect
+
+#ifdef PS2_USE_BUSYWAIT
+#define PS2_CLOCK_PORT PORTF
+#define PS2_CLOCK_PIN PINF
+#define PS2_CLOCK_DDR DDRF
+#define PS2_CLOCK_BIT 0
+#define PS2_DATA_PORT PORTF
+#define PS2_DATA_PIN PINF
+#define PS2_DATA_DDR DDRF
+#define PS2_DATA_BIT 1
#endif
#endif
diff --git a/converter/ps2_usb/config_pjrc.h b/converter/ps2_usb/config_pjrc.h
deleted file mode 100644
index 883ffab275..0000000000
--- a/converter/ps2_usb/config_pjrc.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* controller configuration */
-#include "controller_teensy.h"
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6512
-#define MANUFACTURER t.m.k.
-#define PRODUCT PS/2 keyboard converter
-#define DESCRIPTION convert PS/2 keyboard to USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 32 // keycode bit: 3-0
-#define MATRIX_COLS 8 // keycode bit: 6-4
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \
- keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
-)
-
-
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-# define MOUSEKEY_DELAY_TIME 255
-#endif
-
-
-/* PS/2 lines */
-#define PS2_CLOCK_PORT PORTF
-#define PS2_CLOCK_PIN PINF
-#define PS2_CLOCK_DDR DDRF
-#define PS2_CLOCK_BIT 0
-#define PS2_DATA_PORT PORTF
-#define PS2_DATA_PIN PINF
-#define PS2_DATA_DDR DDRF
-#define PS2_DATA_BIT 1
-
-#endif
diff --git a/converter/ps2_usb/config_pjrc_usart.h b/converter/ps2_usb/config_pjrc_usart.h
deleted file mode 100644
index 83ddbf7703..0000000000
--- a/converter/ps2_usb/config_pjrc_usart.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* controller configuration */
-#include "controller_teensy.h"
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6513
-#define MANUFACTURER t.m.k.
-#define PRODUCT PS/2 keyboard converter(USART)
-#define DESCRIPTION convert PS/2 keyboard to USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 32 // keycode bit: 3-0
-#define MATRIX_COLS 8 // keycode bit: 6-4
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \
- keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
-)
-
-
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-# define MOUSEKEY_DELAY_TIME 255
-#endif
-
-
-/* PS/2 lines */
-#define PS2_CLOCK_PORT PORTD
-#define PS2_CLOCK_PIN PIND
-#define PS2_CLOCK_DDR DDRD
-#define PS2_CLOCK_BIT 5
-#define PS2_DATA_PORT PORTD
-#define PS2_DATA_PIN PIND
-#define PS2_DATA_DDR DDRD
-#define PS2_DATA_BIT 2
-
-
-// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge
-// set DDR of CLOCK as input to be slave
-#define PS2_USART_INIT() do { \
- PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
- PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
- UCSR1C = ((1 << UMSEL10) | \
- (3 << UPM10) | \
- (0 << USBS1) | \
- (3 << UCSZ10) | \
- (0 << UCPOL1)); \
- UCSR1A = 0; \
- UBRR1H = 0; \
- UBRR1L = 0; \
-} while (0)
-#define PS2_USART_RX_INT_ON() do { \
- UCSR1B = ((1 << RXCIE1) | \
- (1 << RXEN1)); \
-} while (0)
-#define PS2_USART_RX_POLL_ON() do { \
- UCSR1B = (1 << RXEN1); \
-} while (0)
-#define PS2_USART_OFF() do { \
- UCSR1C = 0; \
- UCSR1B &= ~((1 << RXEN1) | \
- (1 << TXEN1)); \
-} while (0)
-#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
-#define PS2_USART_RX_DATA UDR1
-#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
-#define PS2_USART_RX_VECT USART1_RX_vect
-
-#endif
diff --git a/converter/ps2_usb/keymap_jis.c b/converter/ps2_usb/keymap_jis.c
new file mode 100644
index 0000000000..787c9558af
--- /dev/null
+++ b/converter/ps2_usb/keymap_jis.c
@@ -0,0 +1,297 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * Keymap for PS/2 keyboard
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+
+
+// Following macros help you to define a keymap with the form of actual keyboard layout.
+
+/* US layout plus all other various keys */
+#define KEYMAP_ALL( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
+ \
+ K61, /* for European ISO */ \
+ K51, K13, K6A, K64, K67, /* for Japanese JIS */ \
+ K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */ \
+ KB7, KBF, KDE, /* System Power, Sleep, Wake */ \
+ KA3, KB2, KA1, /* Mute, Volume Up, Volume Down */ \
+ KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */ \
+ KC8, KAB, KC0, /* Mail, Calculator, My Computer */ \
+ K90, KBA, KB8, KB0, /* WWW Search, Home, Back, Forward */ \
+ KA8, KA0, K98 /* WWW Stop, Refresh, Favorites */ \
+) { \
+ { KB_NO, KB_##K01, KB_NO, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
+ { KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_NO }, \
+ { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_NO }, \
+ { KB_##K18, KB_NO, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_NO }, \
+ { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_NO }, \
+ { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_NO }, \
+ { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_NO }, \
+ { KB_##K38, KB_NO, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_NO }, \
+ { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_NO }, \
+ { KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_NO }, \
+ { KB_##K50, KB_##K51, KB_##K52, KB_NO, KB_##K54, KB_##K55, KB_NO, KB_##K57 }, \
+ { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_NO, KB_##K5D, KB_NO, KB_##K5F }, \
+ { KB_NO, KB_##K61, KB_NO, KB_NO, KB_##K64, KB_NO, KB_##K66, KB_##K67 }, \
+ { KB_NO, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_NO, KB_NO, KB_NO }, \
+ { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \
+ { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO }, \
+ { KB_NO, KB_NO, KB_NO, KB_##K83, KB_NO, KB_NO, KB_NO, KB_NO }, \
+ { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \
+ { KB_##K90, KB_##K91, KB_NO, KB_NO, KB_##K94, KB_##K95, KB_NO, KB_NO }, \
+ { KB_##K98, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K9F }, \
+ { KB_##KA0, KB_##KA1, KB_NO, KB_##KA3, KB_NO, KB_NO, KB_NO, KB_##KA7 }, \
+ { KB_##KA8, KB_NO, KB_NO, KB_##KAB, KB_NO, KB_NO, KB_NO, KB_##KAF }, \
+ { KB_##KB0, KB_NO, KB_##KB2, KB_NO, KB_##KB4, KB_NO, KB_NO, KB_##KB7 }, \
+ { KB_##KB8, KB_NO, KB_##KBA, KB_##KBB, KB_NO, KB_NO, KB_NO, KB_##KBF }, \
+ { KB_##KC0, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \
+ { KB_##KC8, KB_NO, KB_##KCA, KB_NO, KB_NO, KB_##KCD, KB_NO, KB_NO }, \
+ { KB_##KD0, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \
+ { KB_NO, KB_NO, KB_##KDA, KB_NO, KB_NO, KB_NO, KB_##KDE, KB_NO }, \
+ { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \
+ { KB_NO, KB_##KE9, KB_NO, KB_##KEB, KB_##KEC, KB_NO, KB_NO, KB_NO }, \
+ { KB_##KF0, KB_##KF1, KB_##KF2, KB_NO, KB_##KF4, KB_##KF5, KB_NO, KB_NO }, \
+ { KB_NO, KB_NO, KB_##KFA, KB_NO, KB_##KFC, KB_##KFD, KB_##KFE, KB_NO }, \
+}
+
+/* JIS layout */
+#define KEYMAP_JIS( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K67,K29,K64,K13, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
+) \
+KEYMAP_ALL( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
+ \
+ NUBS, \
+ K51, K13, K6A, K64, K67, \
+ F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
+ SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
+ AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
+ MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
+ MAIL, CALCULATOR, MY_COMPUTER, \
+ WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
+ WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
+)
+
+#define KEYMAP_JIS_COMPACT( \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D, K5A, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51, K59, \
+ K14,K9F,K11, K67,K29,K64,K13, K91,KA7,KAF,K94 \
+) \
+KEYMAP_ALL( \
+ ESC,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10,F11,F12, PSCR,SLCK,BRK, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, DEL, END, PGDN, P7, P8, P9, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, P4, P5, P6, PPLS, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, UP, P1, P2, P3, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, LEFT,DOWN,RGHT, P0, PDOT,PENT, \
+ \
+ NUBS, \
+ K51, K13, K6A, K64, K67, \
+ F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
+ SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
+ AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
+ MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
+ MAIL, CALCULATOR, MY_COMPUTER, \
+ WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
+ WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
+)
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+ 1, // Fn0
+ 2, // Fn1
+ 1, // Fn2
+ 2, // Fn3
+ 3, // Fn4
+ 4, // Fn5
+ 0, // Fn6
+ 0 // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+ KB_SCLN, // Fn0
+ KB_SLSH, // Fn1
+ KB_BSPC, // Fn2
+ KB_NO, // Fn3
+ KB_NO, // Fn4
+ KB_SPC, // Fn5
+ KB_NO, // Fn6
+ KB_NO // Fn7
+};
+
+
+// The keymap is a 32*8 byte array which convert a PS/2 scan code into a USB keycode.
+// See usb_keycodes.h for USB keycodes. You should omit a 'KB_' prefix of USB keycodes in keymap macro.
+// Use KEYMAP_ISO() or KEYMAP_JIS() instead of KEYMAP() if your keyboard is ISO or JIS.
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: JIS LAYOUT
+ * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------.
+ * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak|
+ * `---' `---------------' `---------------' `---------------' `-----------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------. ,---------------.
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| JY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -|
+ * |-----------------------------------------------------------| |-----------| |---------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Ret | |Del|End|PgD| | 7| 8| 9| |
+ * |------------------------------------------------------` | `-----------' |-----------| +|
+ * |CapsLo| A| S| D| F| G| H| J| K| L| ;| :| \| | | 4| 5| 6| |
+ * |-----------------------------------------------------------| ,---. |---------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3| |
+ * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+ * |Ctrl |Gui |Alt |MHEN| Space |HENK|KANA|Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| |
+ * `-----------------------------------------------------------' `-----------' `---------------'
+ */
+/*
+ KEYMAP_JIS(
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, DEL, END, PGDN, P7, P8, P9,
+ CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS, ENT, P4, P5, P6, PPLS,
+ LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RO, RSFT, UP, P1, P2, P3,
+ LCTL,LGUI,LALT, MHEN,SPC, HENK,KANA, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
+ ),
+*/
+ /* 0: HHKB-wise
+ * ,-----------------------------------------------------------.
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
+ * |-----------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Bsp |
+ * |------------------------------------------------------` |
+ * |Ctrl | A| S| D| F| G| H| J| K| L| ;| :|Ret| |
+ * |-----------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| ,| /| RO|Shift |
+ * |-----------------------------------------------------------|
+ * |Ctrl |Gui |Alt |MHEN| Space |HENK|KANA|Alt |Gui |Menu|Ctrl|
+ * `-----------------------------------------------------------'
+ */
+ KEYMAP_JIS_COMPACT(
+ ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,BSPC,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,
+ LCTL,A, S, D, F, G, H, J, K, L, FN0, QUOT,GRV, ENT,
+ LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, RSFT, FN4,
+ LCTL,LGUI,LALT, LALT,FN5, FN2, FN3, RALT,RGUI,APP, LGUI
+ ),
+
+ /* 1: Mouse keys
+ * ,-----------------------------------------------------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
+ * |-----------------------------------------------------------|
+ * |Tab |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR| | | | \|
+ * |-----------------------------------------------------------|
+ * |CapsLo| |McL|McD|McR| |McL|McD|McU|McR|Fn0| |Return |
+ * |-----------------------------------------------------------|
+ * |Shift |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift |
+ * |-----------------------------------------------------------|
+ * |Ctrl |Gui |Alt | Mb1 |Alt |Gui |Menu|Ctrl|
+ * `-----------------------------------------------------------'
+ * Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button
+ * Vo = Volume, Mut = Mute
+ */
+ KEYMAP_JIS_COMPACT(
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, INS, DEL,
+ TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO,
+ LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, NO, ENT,
+ LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,BTN2,BTN3,NO, RSFT, RSFT,
+ LCTL,LGUI,LALT, LALT,BTN1,FN2, RALT, RALT,RGUI,APP, LGUI
+ ),
+
+ /* 2: Cursor keys
+ * ,-----------------------------------------------------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
+ * |-----------------------------------------------------------|
+ * |Tab |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End| | | | \|
+ * |-----------------------------------------------------------|
+ * |CapsLo| |Lef|Dow|Rig| |Lef|Dow| Up|Rig| | |Return |
+ * |-----------------------------------------------------------|
+ * |Shift | | | | | |Hom|PgD|PgU|End|Fn1|Shift |
+ * |-----------------------------------------------------------|
+ * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl|
+ * `-----------------------------------------------------------'
+ */
+ KEYMAP_JIS_COMPACT(
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, INS, DEL,
+ TAB, HOME,PGUP,UP, PGDN,END, HOME,PGDN,PGUP,END, NO, NO, NO,
+ LCTL,HOME,LEFT,DOWN,RGHT,END, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT,
+ LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN1, RSFT, RSFT,
+ LCTL,LGUI,LALT, LALT,BTN1,BSPC,FN3, RALT,RGUI,APP, LGUI
+ ),
+
+ /* 3: HHKB Fn layer */
+ KEYMAP_JIS_COMPACT(
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, INS, DEL,
+ CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO,
+ LCTL,VOLD,VOLU,MUTE,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT,NO, ENT,
+ LSFT,NO, NO, NO, NO, NO, NO, NO, END, PGDN,DOWN,RSFT, FN4,
+ LCTL,LGUI,LALT, LALT,SPC, BSPC,NO, RALT,RGUI,APP, LGUI
+ ),
+
+ /* 4: Number */
+ KEYMAP_JIS_COMPACT(
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, INS, DEL,
+ TAB, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO,
+ LCTL,1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, ENT,
+ LSFT,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, RSFT,
+ LCTL,LGUI,LALT, LALT,FN5, BSPC,NO, RALT,RGUI,APP, LGUI
+ ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+ return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+ return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+ return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/converter/ps2_usb/usbconfig.h b/converter/ps2_usb/usbconfig.h
index 9038f1eb8c..d0ca4c717e 100644
--- a/converter/ps2_usb/usbconfig.h
+++ b/converter/ps2_usb/usbconfig.h
@@ -11,7 +11,6 @@
#ifndef __usbconfig_h_included__
#define __usbconfig_h_included__
-#include "config_vusb.h"
/*
General Description:
diff --git a/protocol/ps2.c b/protocol/ps2.c
index 8a05916210..cf7b1f43ce 100644
--- a/protocol/ps2.c
+++ b/protocol/ps2.c
@@ -89,8 +89,9 @@ uint8_t ps2_error = PS2_ERR_NONE;
void ps2_host_init(void)
{
-#ifdef PS2_INT_ENABLE
- PS2_INT_ENABLE();
+#ifdef PS2_USE_INT
+ PS2_INT_INIT();
+ PS2_INT_ON();
idle();
#else
inhibit();
@@ -103,8 +104,8 @@ uint8_t ps2_host_send(uint8_t data)
uint8_t res = 0;
bool parity = true;
ps2_error = PS2_ERR_NONE;
-#ifdef PS2_INT_DISABLE
- PS2_INT_DISABLE();
+#ifdef PS2_USE_INT
+ PS2_INT_OFF();
#endif
/* terminate a transmission if we have */
inhibit();
@@ -144,8 +145,8 @@ uint8_t ps2_host_send(uint8_t data)
res = ps2_host_recv_response();
ERROR:
-#ifdef PS2_INT_ENABLE
- PS2_INT_ENABLE();
+#ifdef PS2_USE_INT
+ PS2_INT_ON();
idle();
#else
inhibit();
@@ -173,7 +174,7 @@ uint8_t ps2_host_recv_response(void)
return data;
}
-#ifndef PS2_INT_VECT
+#ifndef PS2_USE_INT
uint8_t ps2_host_recv(void)
{
return ps2_host_recv_response();