Fix PS/2 protocol build options

11 files changed, 503 insertions, 320 deletions

diff --git a/converter/ps2_usb/Makefile b/converter/ps2_usb/Makefile
index 1278a74be7..0c6442374c 100644
--- a/converter/ps2_usb/Makefile
+++ b/converter/ps2_usb/Makefile
@@ -1,10 +1,5 @@
-#
-# Makefile for PJRC Teensy
-#
-
-
 # Target file name (without extension).
-TARGET = ps2_usb_pjrc
+TARGET = ps2_usb
 
 # Directory common source filess exist
 TOP_DIR = ../..
@@ -12,14 +7,6 @@ TOP_DIR = ../..
 # Directory keyboard dependent files exist
 TARGET_DIR = .
 
-# keyboard dependent files
-SRC =	keymap.c \
-	matrix.c \
-	led.c \
-	ps2.c
-
-CONFIG_H = config_pjrc.h
-
 
 # MCU name, you MUST set this to match the board you are using
 # type "make clean" after changing this, so all files will be rebuilt
@@ -44,6 +31,33 @@ MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control
 NKRO_ENABLE = yes	# USB Nkey Rollover
 
+PS2_USE_USART = yes	# uses hardware USART engine for PS/2 signal receive(recomened)
+#PS2_USE_INT = yes	# uses external interrupt for falling edge of PS/2 clock pin
+#PS2_USE_BUSYWAIT = yes	# uses primitive reference code
+
+
+# keyboard dependent files
+SRC =   keymap.c \
+	matrix.c \
+	led.c
+
+
+ifdef PS2_USE_USART
+    SRC += protocol/ps2_usart.c
+    OPT_DEFS += -DPS2_USE_USART
+endif
+ifdef PS2_USE_INT
+    SRC += protocol/ps2.c
+    OPT_DEFS += -DPS2_USE_INT
+endif
+ifdef PS2_USE_BUSYWAIT
+    SRC += protocol/ps2.c
+    OPT_DEFS += -DPS2_USE_BUSYWAIT
+endif
+
+
+#CONFIG_H = config_pjrc_usart.h
+CONFIG_H = config.h
 
 
 #---------------- Programming Options --------------------------
diff --git a/converter/ps2_usb/Makefile.pjrc_usart b/converter/ps2_usb/Makefile.jis
index dd74712e48..4e091e8e2d 100644
--- a/converter/ps2_usb/Makefile.pjrc_usart
+++ b/converter/ps2_usb/Makefile.jis
@@ -1,10 +1,5 @@
-#
-# Makefile for PJRC Teensy
-#
-
-
 # Target file name (without extension).
-TARGET = ps2_usb_pjrc_usart
+TARGET = ps2_usb_jis
 
 # Directory common source filess exist
 TOP_DIR = ../..
@@ -12,14 +7,6 @@ TOP_DIR = ../..
 # Directory keyboard dependent files exist
 TARGET_DIR = .
 
-# keyboard dependent files
-SRC =   keymap.c \
-	matrix.c \
-	led.c \
-	ps2_usart.c
-
-CONFIG_H = config_pjrc_usart.h
-
 
 # MCU name, you MUST set this to match the board you are using
 # type "make clean" after changing this, so all files will be rebuilt
@@ -44,6 +31,33 @@ MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control
 NKRO_ENABLE = yes	# USB Nkey Rollover
 
+#PS2_USE_USART = yes	# uses hardware USART engine for PS/2 signal receive(recomened)
+#PS2_USE_INT = yes	# uses external interrupt for falling edge of PS/2 clock pin
+PS2_USE_BUSYWAIT = yes	# uses primitive reference code
+
+
+# keyboard dependent files
+SRC =   keymap_jis.c \
+	matrix.c \
+	led.c
+
+
+ifdef PS2_USE_USART
+    SRC += protocol/ps2_usart.c
+    OPT_DEFS += -DPS2_USE_USART
+endif
+ifdef PS2_USE_INT
+    SRC += protocol/ps2.c
+    OPT_DEFS += -DPS2_USE_INT
+endif
+ifdef PS2_USE_BUSYWAIT
+    SRC += protocol/ps2.c
+    OPT_DEFS += -DPS2_USE_BUSYWAIT
+endif
+
+
+#CONFIG_H = config_pjrc_usart.h
+CONFIG_H = config.h
 
 
 #---------------- Programming Options --------------------------
diff --git a/converter/ps2_usb/Makefile.vusb b/converter/ps2_usb/Makefile.vusb
index b08d30d574..d449e1e40f 100644
--- a/converter/ps2_usb/Makefile.vusb
+++ b/converter/ps2_usb/Makefile.vusb
@@ -1,8 +1,3 @@
-#
-# Makefile for V-USB
-#
-
-
 # Target file name (without extension).
 TARGET = ps2_usb_vusb
 
@@ -15,15 +10,18 @@ TARGET_DIR = .
 # keyboard dependent files
 SRC =	keymap.c \
 	matrix.c \
-	led.c \
-	ps2_usart.c
+	led.c
+
+# Use USART for PS/2. With V-USB INT and BUSYWAIT code is not useful.
+SRC += protocol/ps2_usart.c
+OPT_DEFS += -DPS2_USE_USART
 
-CONFIG_H = config_vusb.h
+CONFIG_H = config.h
 
 
 # V-USB debug level: To use ps2_usart.c level must be 0
 # ps2_usart.c requires USART to receive PS/2 signal.
-OPT_DEFS = -DDEBUG_LEVEL=0
+OPT_DEFS += -DDEBUG_LEVEL=0
 
 
 # MCU name, you MUST set this to match the board you are using
diff --git a/converter/ps2_usb/README b/converter/ps2_usb/README
index c10393e5e7..cb7ba55551 100644
--- a/converter/ps2_usb/README
+++ b/converter/ps2_usb/README
@@ -1,7 +1,7 @@
 PS/2 to USB keyboard converter
 ==============================
-This firmware converts PS/2 keyboard protocol to USB and for now supports only Scan Code Set 2.
-This will works on USB AVR(ATMega32U4, AT90USB) or V-USB.
+This firmware converts PS/2 keyboard protocol to USB and supports only Scan Code Set 2.
+This will works on USB AVR(ATMega32U4, AT90USB) or V-USB(ATMega168, 328...).
 
 
 Features
@@ -19,25 +19,29 @@ Keymap customization
 PS/2 signal handling implementations
 ------------------------------------
 Following three methods are used to implement PS/2 signal handling.
-a. Simple and stupid wait & read loop(intensive use of cycles)
-    This is implemented with (expected) portable C code for reference. See ps2.c.
-b. Interrupt driven
-    See ps2_intr.c
-c. Using USART hardware module(no cycle needed)
-    This uses AVR USART function to recevie PS/2 signal and be used in V-USB converter.
-    See ps2_usart.c.
-
-
-Build Converter
----------------
-Connect PS/2 keyboard into Teensy with 4 lines(Vcc, GND, Data, Clock).
-For a. Simple and stupid and b. Interrupt implementaion:
-    By default Clock is on PF0 and Data on PF1.
-    You can change this pin configuration by editing config_pjrc.h.
-    In this photo Vcc is yellow, GND is green, Data is red and Clock is black.
-    http://img17.imageshack.us/img17/7243/201101181933.jpg
-For c. USART implementation:
-    In case of Teensny(ATMega32u4) CLock is on PD5 and Data on PD2.
+a. Simple and stupid busy-wait(ps2.c)
+    This is expected to implemented with portable C code for reference.
+b. Interrupt driven(ps2.c)
+    Uses external interrupt to detect falling edge of clock line.
+c. USART hardware module(ps2_usart.c)
+    Uses AVR USART engine to recevie PS/2 signal. Recomended and default.
+    This is required to work with V-USB, preceding two methods tend to
+    miss signal edges while V-USB handles USB.
+
+To select method edit Makefile.
+
+
+Connect Wires
+-------------
+In case of Teensy2.0(ATMega32U4):
+0. Connect Vcc and GND.
+1. Connect Clock and Data line. 
+    For a. Clock is on PF0 and Data on PF1.
+    For b. Clock is on PD1 and Data on PD2.
+    For c. Clock is on PD5 and Data on PD2.
+2. Optionally you need pull-up register. 1K-10K Ohm is OK.
+
+To change pin configuration edit config.h.
 
 
 Build Frimware
@@ -45,12 +49,12 @@ Build Frimware
 1. Edit Makefile for build options and MCU setting.
     Use 'atmega32u4' for Teensy 2.0 or 'at90usb1286' for Teensy++ 2.0.
 2. make
-    Just type 'make' in a terminal.
-    Use '-f Makefile.pjrc_intr' option to use b. Interrupt.
-    Use '-f Makefile.pjrc_usart' option to use c. USART.
-    Use '-f Makefile.vusb' option to build V-USB converter.
-3. program with Teensy Loader.
-    http://www.pjrc.com/teensy/loader.html
+    Just type `make` in a terminal.
+    Use `-f Makefile.vusb` option to build V-USB converter.
+    Use `-f Makefile.jis` option to use JIS keyboard.
+3. program MCU.
+    In case of Teensy use `Teensy Loader`.(http://www.pjrc.com/teensy/loader.html)
+    Otherwise you want to use `avrdude` or `dfu-programmer`.
 
 
 Demonstration of Features
@@ -83,34 +87,36 @@ Fn layer function:
 
 Keymap
 ------
-You can change a keymap by editing code of keymap.c like following.
-How to define the keymap is probably obvious. You can find  key symbols in usb_keycodes.h.
-To define keymap layer switching may needs a bit of your effort at this time.
-
-    /* Default Layer: plain keymap
-     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.     ,-----------.
-     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|     |Pwr|Slp|Wak|
-     * `---'   `---------------' `---------------' `---------------' `-----------'     `-----------'
-     * ,-----------------------------------------------------------. ,-----------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa| |Ins|Hom|PgU| |NmL|  /|  *|  -|
-     * |-----------------------------------------------------------| |-----------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|   |
-     * |-----------------------------------------------------------| `-----------' |-----------|  +|
-     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |               |  4|  5|  6|   |
-     * |-----------------------------------------------------------|     ,---.     |---------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
-     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
-     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| |      0|  .|   |
-     * `-----------------------------------------------------------' `-----------' `---------------'
-     */
-    KEYMAP(
-    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,          PWR, F13, F14,
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
-    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
-    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
-    ),
+You can change a keymap by editing code of keymap. See common/keycode.h for key symbols.
+
+
+V-USB Support
+-------------
+You can also use this converter on ATmega(168/328) with V-USB instead of Teensy.
+The converter on V-USB lacks some features for now: USB NKRO and System/Media control.
+
+Circuit
+-------
+                +---+   +---------------+
+USB            GND  |   |   ATmega168   |
+===                 C3  |               |
+5V <-------+--------+---|Vcc,AVCC       |        PS/2
+           R1           |               |        ====
+D- <----+--+-----R2-----|INT1        RXD|------->DATA
+D+ <----|---+----R3-----|INT0        XCK|------->CLOCK
+        Z1  Z2          |               |      ->5V
+GND<----+---+--+--+-----|GND            |      ->GND
+               |  |     |               |
+               |  C2-+--|XTAL1          |
+               |     X1 |               |
+               +--C3-+--|XTAL2          |
+                        +---------------+
+R1:     1.5K Ohm
+R2,R3:  68 Ohm
+Z1,Z2:  Zenner 3.6V
+C1,C2:  22pF
+C3:     0.1uF
+X1:     Crystal 20MHz(16MHz/12MHz)
 
 
 EOF
diff --git a/converter/ps2_usb/README.vusb b/converter/ps2_usb/README.vusb
deleted file mode 100644
index c92871bcdd..0000000000
--- a/converter/ps2_usb/README.vusb
+++ /dev/null
@@ -1,37 +0,0 @@
-V-USB Support
-=============
-You can also use this converter on ATmega(168/328) with V-USB instead of Teensy.
-The converter on V-USB lacks some features for now: USB NKRO and System/Media control.
-
-To build a firmware use Makefile.vusb instead of Makefile.
-
-
-Circuit
--------
-                +---+   +---------------+
-USB            GND  |   |   ATmega168   |
-===                 C3  |               |
-5V <-------+--------+---|Vcc,AVCC       |        PS/2
-           R1           |               |        ====
-D- <----+--+-----R2-----|INT1        RXD|------->DATA
-D+ <----|---+----R3-----|INT0        XCK|------->CLOCK
-        Z1  Z2          |               |      ->5V
-GND<----+---+--+--+-----|GND            |      ->GND
-               |  |     |               |
-               |  C2-+--|XTAL1          |
-               |     X1 |               |
-               +--C3-+--|XTAL2          |
-                        +---------------+
-R1:     1.5K Ohm
-R2,R3:  68 Ohm
-Z1,Z2:  Zenner 3.6V
-C1,C2:  22pF
-C3:     0.1uF
-X1:     Crystal 20MHz(16MHz/12MHz)
-
-
-This is my V-USB converter on breadboard.
-[IMG]http://i.imgur.com/8jJCZl.jpg[/IMG]
-
-
-EOF
diff --git a/converter/ps2_usb/config_vusb.h b/converter/ps2_usb/config.h
index afd2f7911f..e5d37e429a 100644
--- a/converter/ps2_usb/config_vusb.h
+++ b/converter/ps2_usb/config.h
@@ -1,5 +1,5 @@
 /*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
+Copyright 2012 Jun Wako <wakojun@gmail.com>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -18,11 +18,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_H
 #define CONFIG_H
 
+#include <avr/interrupt.h>
+/* controller configuration */
+#include "controller_teensy.h"
 
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x2233
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
+#define PRODUCT_ID      0x6512
 #define MANUFACTURER    t.m.k.
 #define PRODUCT         PS/2 keyboard converter
 #define DESCRIPTION     convert PS/2 keyboard to USB
@@ -46,30 +47,62 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 
-/* PS/2 lines */
+#ifdef PS2_USE_USART
+#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)
+/* XCK for clock line and RXD for data line */
 #define PS2_CLOCK_PORT  PORTD
 #define PS2_CLOCK_PIN   PIND
 #define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   4
+#define PS2_CLOCK_BIT   5
 #define PS2_DATA_PORT   PORTD
 #define PS2_DATA_PIN    PIND
 #define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    0
+#define PS2_DATA_BIT    2
 
+/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
+/* set DDR of CLOCK as input to be slave */
+#define PS2_USART_INIT() do {   \
+    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
+    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
+    UCSR1C = ((1 << UMSEL10) |  \
+              (3 << UPM10)   |  \
+              (0 << USBS1)   |  \
+              (3 << UCSZ10)  |  \
+              (0 << UCPOL1));   \
+    UCSR1A = 0;                 \
+    UBRR1H = 0;                 \
+    UBRR1L = 0;                 \
+} while (0)
+#define PS2_USART_RX_INT_ON() do {  \
+    UCSR1B = ((1 << RXCIE1) |       \
+              (1 << RXEN1));        \
+} while (0)
+#define PS2_USART_RX_POLL_ON() do { \
+    UCSR1B = (1 << RXEN1);          \
+} while (0)
+#define PS2_USART_OFF() do {    \
+    UCSR1C = 0;                 \
+    UCSR1B &= ~((1 << RXEN1) |  \
+                (1 << TXEN1));  \
+} while (0)
+#define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
+#define PS2_USART_RX_DATA       UDR1
+#define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
+#define PS2_USART_RX_VECT       USART1_RX_vect
 
-// Synchronous USART is used to receive data from keyboard.
-// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK.
-// NOTE: This is recomended strongly if you use V-USB library.
-#define PS2_USE_USART
-
-// External or Pin Change Interrupt is used to receive data from keyboard.
-// Use INT1 or PCINTxx for PS/2 CLOCK line. see below.
-//#define PS2_USE_INT
-
+#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
+/* XCK for clock line and RXD for data line */
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   4
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    0
 
-#ifdef PS2_USE_USART
-// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge
-// set DDR of CLOCK as input to be slave
+/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
+/* set DDR of CLOCK as input to be slave */
 #define PS2_USART_INIT() do {   \
     PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
     PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
@@ -99,10 +132,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PS2_USART_ERROR         (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0)))
 #define PS2_USART_RX_VECT       USART_RX_vect
 #endif
+#endif
 
 
 #ifdef PS2_USE_INT
-/* INT1
+/* uses INT1 for clock line(ATMega32U4) */
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   1
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    2
+
 #define PS2_INT_INIT()  do {    \
     EICRA |= ((1<<ISC11) |      \
               (0<<ISC10));      \
@@ -114,20 +157,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     EIMSK &= ~(1<<INT1);        \
 } while (0)
 #define PS2_INT_VECT    INT1_vect
-*/
+#endif
 
-/* PCINT20 */
-#define PS2_INT_INIT()  do {    \
-    PCICR  |= (1<<PCIE2);       \
-} while (0)
-#define PS2_INT_ON()  do {      \
-    PCMSK2 |= (1<<PCINT20);     \
-} while (0)
-#define PS2_INT_OFF() do {      \
-    PCMSK2 &= ~(1<<PCINT20);    \
-    PCICR  &= ~(1<<PCIE2);      \
-} while (0)
-#define PS2_INT_VECT    PCINT2_vect
+
+#ifdef PS2_USE_BUSYWAIT
+#define PS2_CLOCK_PORT  PORTF
+#define PS2_CLOCK_PIN   PINF
+#define PS2_CLOCK_DDR   DDRF
+#define PS2_CLOCK_BIT   0
+#define PS2_DATA_PORT   PORTF
+#define PS2_DATA_PIN    PINF
+#define PS2_DATA_DDR    DDRF
+#define PS2_DATA_BIT    1
 #endif
 
 #endif
diff --git a/converter/ps2_usb/config_pjrc.h b/converter/ps2_usb/config_pjrc.h
deleted file mode 100644
index 883ffab275..0000000000
--- a/converter/ps2_usb/config_pjrc.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* controller configuration */
-#include "controller_teensy.h"
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6512
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         PS/2 keyboard converter
-#define DESCRIPTION     convert PS/2 keyboard to USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 32  // keycode bit: 3-0
-#define MATRIX_COLS 8   // keycode bit: 6-4
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \
-    keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
-)
-
-
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-#   define MOUSEKEY_DELAY_TIME 255
-#endif
-
-
-/* PS/2 lines */
-#define PS2_CLOCK_PORT  PORTF
-#define PS2_CLOCK_PIN   PINF
-#define PS2_CLOCK_DDR   DDRF
-#define PS2_CLOCK_BIT   0
-#define PS2_DATA_PORT   PORTF
-#define PS2_DATA_PIN    PINF
-#define PS2_DATA_DDR    DDRF
-#define PS2_DATA_BIT    1
-
-#endif
diff --git a/converter/ps2_usb/config_pjrc_usart.h b/converter/ps2_usb/config_pjrc_usart.h
deleted file mode 100644
index 83ddbf7703..0000000000
--- a/converter/ps2_usb/config_pjrc_usart.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* controller configuration */
-#include "controller_teensy.h"
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6513
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         PS/2 keyboard converter(USART)
-#define DESCRIPTION     convert PS/2 keyboard to USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 32  // keycode bit: 3-0
-#define MATRIX_COLS 8   // keycode bit: 6-4
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \
-    keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
-)
-
-
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-#   define MOUSEKEY_DELAY_TIME 255
-#endif
-
-
-/* PS/2 lines */
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   5
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    2
-
-
-// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge
-// set DDR of CLOCK as input to be slave
-#define PS2_USART_INIT() do {   \
-    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
-    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
-    UCSR1C = ((1 << UMSEL10) |  \
-              (3 << UPM10)   |  \
-              (0 << USBS1)   |  \
-              (3 << UCSZ10)  |  \
-              (0 << UCPOL1));   \
-    UCSR1A = 0;                 \
-    UBRR1H = 0;                 \
-    UBRR1L = 0;                 \
-} while (0)
-#define PS2_USART_RX_INT_ON() do {  \
-    UCSR1B = ((1 << RXCIE1) |       \
-              (1 << RXEN1));        \
-} while (0)
-#define PS2_USART_RX_POLL_ON() do { \
-    UCSR1B = (1 << RXEN1);          \
-} while (0)
-#define PS2_USART_OFF() do {    \
-    UCSR1C = 0;                 \
-    UCSR1B &= ~((1 << RXEN1) |  \
-                (1 << TXEN1));  \
-} while (0)
-#define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
-#define PS2_USART_RX_DATA       UDR1
-#define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
-#define PS2_USART_RX_VECT       USART1_RX_vect
-
-#endif
diff --git a/converter/ps2_usb/keymap_jis.c b/converter/ps2_usb/keymap_jis.c
new file mode 100644
index 0000000000..787c9558af
--- /dev/null
+++ b/converter/ps2_usb/keymap_jis.c
@@ -0,0 +1,297 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* 
+ * Keymap for PS/2 keyboard
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+
+
+// Following macros help you to define a keymap with the form of actual keyboard layout.
+
+/* US layout plus all other various keys */
+#define KEYMAP_ALL( \
+    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
+    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
+    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
+    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA, \
+                                                                                            \
+    K61,                     /* for European ISO */                                         \
+    K51, K13, K6A, K64, K67, /* for Japanese JIS */                                         \
+    K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */                \
+    KB7, KBF, KDE,           /* System Power, Sleep, Wake */                                \
+    KA3, KB2, KA1,           /* Mute, Volume Up, Volume Down */                             \
+    KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */                \
+    KC8, KAB, KC0,           /* Mail, Calculator, My Computer */                            \
+    K90, KBA, KB8, KB0,      /* WWW Search, Home, Back, Forward */                          \
+    KA8, KA0, K98            /* WWW Stop, Refresh, Favorites */                             \
+) { \
+    { KB_NO,    KB_##K01, KB_NO,    KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
+    { KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_NO    }, \
+    { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_NO    }, \
+    { KB_##K18, KB_NO,    KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_NO    }, \
+    { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_NO    }, \
+    { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_NO    }, \
+    { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_NO    }, \
+    { KB_##K38, KB_NO,    KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_NO    }, \
+    { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_NO    }, \
+    { KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_NO    }, \
+    { KB_##K50, KB_##K51, KB_##K52, KB_NO,    KB_##K54, KB_##K55, KB_NO,    KB_##K57 }, \
+    { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_NO,    KB_##K5D, KB_NO,    KB_##K5F }, \
+    { KB_NO,    KB_##K61, KB_NO,    KB_NO,    KB_##K64, KB_NO,    KB_##K66, KB_##K67 }, \
+    { KB_NO,    KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \
+    { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_##K83, KB_NO,    KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_##K90, KB_##K91, KB_NO,    KB_NO,    KB_##K94, KB_##K95, KB_NO,    KB_NO    }, \
+    { KB_##K98, KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_##K9F }, \
+    { KB_##KA0, KB_##KA1, KB_NO,    KB_##KA3, KB_NO,    KB_NO,    KB_NO,    KB_##KA7 }, \
+    { KB_##KA8, KB_NO,    KB_NO,    KB_##KAB, KB_NO,    KB_NO,    KB_NO,    KB_##KAF }, \
+    { KB_##KB0, KB_NO,    KB_##KB2, KB_NO,    KB_##KB4, KB_NO,    KB_NO,    KB_##KB7 }, \
+    { KB_##KB8, KB_NO,    KB_##KBA, KB_##KBB, KB_NO,    KB_NO,    KB_NO,    KB_##KBF }, \
+    { KB_##KC0, KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_##KC8, KB_NO,    KB_##KCA, KB_NO,    KB_NO,    KB_##KCD, KB_NO,    KB_NO    }, \
+    { KB_##KD0, KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_##KDA, KB_NO,    KB_NO,    KB_NO,    KB_##KDE, KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_NO,    KB_##KE9, KB_NO,    KB_##KEB, KB_##KEC, KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_##KF0, KB_##KF1, KB_##KF2, KB_NO,    KB_##KF4, KB_##KF5, KB_NO,    KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_##KFA, KB_NO,    KB_##KFC, KB_##KFD, KB_##KFE, KB_NO    }, \
+}
+
+/* JIS layout */
+#define KEYMAP_JIS( \
+    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,         KFC,K7E,KFE,                   \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,         KF1,KE9,KFA,  K6C,K75,K7D,     \
+    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,    K5A,               K6B,K73,K74,K79, \
+    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51,        K59,     KF5,      K69,K72,K7A,     \
+    K14,K9F,K11,    K67,K29,K64,K13,            K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA  \
+) \
+KEYMAP_ALL( \
+    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
+    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
+    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
+    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA, \
+                                                                                            \
+    NUBS,                                                                                   \
+    K51, K13, K6A, K64, K67,                                                                \
+    F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,                             \
+    SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE,                                                \
+    AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN,                                               \
+    MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT,         \
+    MAIL, CALCULATOR, MY_COMPUTER,                                                          \
+    WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD,                                            \
+    WWW_STOP, WWW_REFRESH, WWW_FAVORITES                                                    \
+)
+
+#define KEYMAP_JIS_COMPACT( \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,         \
+    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,    K5A, \
+    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51,        K59, \
+    K14,K9F,K11,    K67,K29,K64,K13,            K91,KA7,KAF,K94  \
+) \
+KEYMAP_ALL( \
+    ESC,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10,F11,F12,     PSCR,SLCK,BRK,                          \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, DEL, END, PGDN,    P7,  P8,  P9,        \
+    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,                    P4,  P5,  P6,  PPLS, \
+    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,      UP,           P1,  P2,  P3,        \
+    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, LEFT,DOWN,RGHT,    P0,       PDOT,PENT, \
+                                                                                            \
+    NUBS,                                                                                   \
+    K51, K13, K6A, K64, K67,                                                                \
+    F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,                             \
+    SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE,                                                \
+    AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN,                                               \
+    MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT,         \
+    MAIL, CALCULATOR, MY_COMPUTER,                                                          \
+    WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD,                                            \
+    WWW_STOP, WWW_REFRESH, WWW_FAVORITES                                                    \
+)
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    1,              // Fn0
+    2,              // Fn1
+    1,              // Fn2
+    2,              // Fn3
+    3,              // Fn4
+    4,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KB_SCLN,        // Fn0
+    KB_SLSH,        // Fn1
+    KB_BSPC,        // Fn2
+    KB_NO,          // Fn3
+    KB_NO,          // Fn4
+    KB_SPC,         // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+};
+
+
+// The keymap is a 32*8 byte array which convert a PS/2 scan code into a USB keycode.
+// See usb_keycodes.h for USB keycodes. You should omit a 'KB_' prefix of USB keycodes in keymap macro.
+// Use KEYMAP_ISO() or KEYMAP_JIS() instead of KEYMAP() if your keyboard is ISO or JIS.
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: JIS LAYOUT
+     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.     ,-----------.
+     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|     |Pwr|Slp|Wak|
+     * `---'   `---------------' `---------------' `---------------' `-----------'     `-----------'
+     * ,-----------------------------------------------------------. ,-----------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| JY|Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -|
+     * |-----------------------------------------------------------| |-----------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| Ret | |Del|End|PgD| |  7|  8|  9|   |
+     * |------------------------------------------------------`    | `-----------' |-----------|  +|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  :|  \|    |               |  4|  5|  6|   |
+     * |-----------------------------------------------------------|     ,---.     |---------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /| RO|Shift |     |Up |     |  1|  2|  3|   |
+     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+     * |Ctrl |Gui |Alt |MHEN| Space  |HENK|KANA|Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| |      0|  .|   |
+     * `-----------------------------------------------------------' `-----------' `---------------'
+     */
+/*
+    KEYMAP_JIS(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,                PSCR,SLCK,BRK,
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,               DEL, END, PGDN,    P7,  P8,  P9,
+    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,BSLS,     ENT,                         P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,RO,            RSFT,          UP,           P1,  P2,  P3,
+    LCTL,LGUI,LALT,     MHEN,SPC, HENK,KANA,               RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
+    ),
+*/
+    /* 0: HHKB-wise
+     * ,-----------------------------------------------------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| Bsp |
+     * |------------------------------------------------------`    |
+     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  :|Ret|    |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /| RO|Shift |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt |MHEN| Space  |HENK|KANA|Alt |Gui |Menu|Ctrl|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP_JIS_COMPACT(
+    ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,BSPC,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,
+    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN0, QUOT,GRV,      ENT,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN1, RSFT,          FN4,
+    LCTL,LGUI,LALT,     LALT,FN5, FN2, FN3,                RALT,RGUI,APP, LGUI
+    ),
+
+    /* 1: Mouse keys
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
+     * |-----------------------------------------------------------|
+     * |Tab  |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR|   |   |   |    \|
+     * |-----------------------------------------------------------|
+     * |CapsLo|   |McL|McD|McR|   |McL|McD|McU|McR|Fn0|   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt |         Mb1           |Alt |Gui |Menu|Ctrl|
+     * `-----------------------------------------------------------'
+     * Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button
+     * Vo = Volume, Mut = Mute
+     */
+    KEYMAP_JIS_COMPACT(
+    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, INS, DEL,
+    TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,
+    LCTL,NO,  MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,FN0, NO,  NO,       ENT,
+    LSFT,NO,  NO,  BTN1,BTN2,BTN3,BTN2,BTN1,BTN2,BTN3,NO,  RSFT,          RSFT,
+    LCTL,LGUI,LALT,     LALT,BTN1,FN2, RALT,               RALT,RGUI,APP, LGUI
+    ),
+
+    /* 2: Cursor keys
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
+     * |-----------------------------------------------------------|
+     * |Tab  |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End|   |   |   |    \|
+     * |-----------------------------------------------------------|
+     * |CapsLo|   |Lef|Dow|Rig|   |Lef|Dow| Up|Rig|   |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |Hom|PgD|PgU|End|Fn1|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP_JIS_COMPACT(
+    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, INS, DEL,
+    TAB, HOME,PGUP,UP,  PGDN,END, HOME,PGDN,PGUP,END, NO,  NO,  NO,
+    LCTL,HOME,LEFT,DOWN,RGHT,END, LEFT,DOWN,UP,  RGHT,NO,  NO,  NO,       ENT,
+    LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN1, RSFT,          RSFT,
+    LCTL,LGUI,LALT,     LALT,BTN1,BSPC,FN3,                RALT,RGUI,APP, LGUI
+    ),
+
+    /* 3: HHKB Fn layer */
+    KEYMAP_JIS_COMPACT(
+    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, INS, DEL,
+    CAPS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,
+    LCTL,VOLD,VOLU,MUTE,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,NO,       ENT,
+    LSFT,NO,  NO,  NO,  NO,  NO,  NO,  NO,  END, PGDN,DOWN,RSFT,          FN4,
+    LCTL,LGUI,LALT,     LALT,SPC, BSPC,NO,                 RALT,RGUI,APP, LGUI
+    ),
+
+    /* 4: Number */
+    KEYMAP_JIS_COMPACT(
+    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, INS, DEL,
+    TAB, NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,
+    LCTL,1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL,      ENT,
+    LSFT,NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  RSFT,          RSFT,
+    LCTL,LGUI,LALT,     LALT,FN5, BSPC,NO,                 RALT,RGUI,APP, LGUI
+    ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/converter/ps2_usb/usbconfig.h b/converter/ps2_usb/usbconfig.h
index 9038f1eb8c..d0ca4c717e 100644
--- a/converter/ps2_usb/usbconfig.h
+++ b/converter/ps2_usb/usbconfig.h
@@ -11,7 +11,6 @@
 #ifndef __usbconfig_h_included__
 #define __usbconfig_h_included__
 
-#include "config_vusb.h"
 
 /*
 General Description:
diff --git a/protocol/ps2.c b/protocol/ps2.c
index 8a05916210..cf7b1f43ce 100644
--- a/protocol/ps2.c
+++ b/protocol/ps2.c
@@ -89,8 +89,9 @@ uint8_t ps2_error = PS2_ERR_NONE;
 
 void ps2_host_init(void)
 {
-#ifdef PS2_INT_ENABLE
-    PS2_INT_ENABLE();
+#ifdef PS2_USE_INT
+    PS2_INT_INIT();
+    PS2_INT_ON();
     idle();
 #else
     inhibit();
@@ -103,8 +104,8 @@ uint8_t ps2_host_send(uint8_t data)
     uint8_t res = 0;
     bool parity = true;
     ps2_error = PS2_ERR_NONE;
-#ifdef PS2_INT_DISABLE
-    PS2_INT_DISABLE();
+#ifdef PS2_USE_INT
+    PS2_INT_OFF();
 #endif
     /* terminate a transmission if we have */
     inhibit();
@@ -144,8 +145,8 @@ uint8_t ps2_host_send(uint8_t data)
 
     res = ps2_host_recv_response();
 ERROR:
-#ifdef PS2_INT_ENABLE
-    PS2_INT_ENABLE();
+#ifdef PS2_USE_INT
+    PS2_INT_ON();
     idle();
 #else
     inhibit();
@@ -173,7 +174,7 @@ uint8_t ps2_host_recv_response(void)
     return data;
 }
 
-#ifndef PS2_INT_VECT
+#ifndef PS2_USE_INT
 uint8_t ps2_host_recv(void)
 {
     return ps2_host_recv_response();