path: root/tmk_core/protocol/arm_atsam/usb/usb.h

/**
 * \file
 *
 * \brief SAM USB Driver
 *
 * Copyright (C) 2014-2016 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */
/*
 * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
 */
#ifndef USB_H_INCLUDED
#define USB_H_INCLUDED

#ifdef __cplusplus
extern "C" {
#endif

/**
 * \defgroup asfdoc_sam0_usb_group SAM Universal Serial Bus (USB)
 *
 * The Universal Serial Bus (USB) module complies with the USB 2.1 specification.
 *
 * The following peripherals are used by this module:
 *  - USB (Universal Serial Bus)
 *
 * The following devices can use this module:
 *  - Atmel | SMART SAM D51
 *
 * The USB module covers following mode:
 * \if USB_DEVICE_MODE
 *  - USB Device Mode
 * \endif
 * \if USB_HOST_MODE
 *  - USB Host Mode
 * \endif
 *
 * The USB module covers following speed:
 * \if USB_HS_MODE
 *  - USB High Speed (480Mbit/s)
 * \endif
 *  - USB Full Speed (12Mbit/s)
 * \if USB_LS_MODE
 *  - USB Low Speed (1.5Mbit/s)
 * \endif
 *
 * \if USB_LPM_MODE
 * The USB module supports Link Power Management (LPM-L1) protocol.
 * \endif
 *
 * USB support needs whole set of enumeration process, to make the device
 * recognizable and usable. The USB driver is designed to interface to the
 * USB Stack in Atmel Software Framework (ASF).
 *
 * \if USB_DEVICE_MODE
 * \section asfdoc_sam0_usb_device USB Device Mode
 * The ASF USB Device Stack has defined the USB Device Driver (UDD) interface,
 * to support USB device operations. The USB module device driver complies with
 * this interface, so that the USB Device Stack can work based on the
 * USB module.
 *
 * Refer to <a href="http://www.atmel.com/images/doc8360.pdf">
 * "ASF - USB Device Stack"</a> for more details.
 * \endif
 *
 * \if USB_HOST_MODE
 * \section adfdoc_sam0_usb_host USB Host Mode
 * The ASF USB Host Stack has defined the USB Host Driver (UHD) interface,
 * to support USB host operations. The USB module host driver complies with
 * this interface, so that the USB Host Stack can work based on the USB module.
 *
 * Refer to <a href="http://www.atmel.com/images/doc8486.pdf">
 * "ASF - USB Host Stack"</a> for more details.
 * \endif
 */

/** Enum for the speed status for the USB module */
enum usb_speed {
    USB_SPEED_LOW,
    USB_SPEED_FULL,
};

/** Enum for the possible callback types for the USB in host module */
enum usb_host_callback {
    USB_HOST_CALLBACK_SOF,
    USB_HOST_CALLBACK_RESET,
    USB_HOST_CALLBACK_WAKEUP,
    USB_HOST_CALLBACK_DNRSM,
    USB_HOST_CALLBACK_UPRSM,
    USB_HOST_CALLBACK_RAMACER,
    USB_HOST_CALLBACK_CONNECT,
    USB_HOST_CALLBACK_DISCONNECT,
    USB_HOST_CALLBACK_N,
};

/** Enum for the possible callback types for the USB pipe in host module */
enum usb_host_pipe_callback {
    USB_HOST_PIPE_CALLBACK_TRANSFER_COMPLETE,
    USB_HOST_PIPE_CALLBACK_ERROR,
    USB_HOST_PIPE_CALLBACK_SETUP,
    USB_HOST_PIPE_CALLBACK_STALL,
    USB_HOST_PIPE_CALLBACK_N,
};

/**
 * \brief Host pipe types.
 */
enum usb_host_pipe_type {
    USB_HOST_PIPE_TYPE_DISABLE,
    USB_HOST_PIPE_TYPE_CONTROL,
    USB_HOST_PIPE_TYPE_ISO,
    USB_HOST_PIPE_TYPE_BULK,
    USB_HOST_PIPE_TYPE_INTERRUPT,
    USB_HOST_PIPE_TYPE_EXTENDED,
};

/**
 * \brief Host pipe token types.
 */
enum usb_host_pipe_token {
    USB_HOST_PIPE_TOKEN_SETUP,
    USB_HOST_PIPE_TOKEN_IN,
    USB_HOST_PIPE_TOKEN_OUT,
};

/**
 * \brief Enumeration for the possible callback types for the USB in device module
 */
enum usb_device_callback {
    USB_DEVICE_CALLBACK_SOF,
    USB_DEVICE_CALLBACK_RESET,
    USB_DEVICE_CALLBACK_WAKEUP,
    USB_DEVICE_CALLBACK_RAMACER,
    USB_DEVICE_CALLBACK_SUSPEND,
    USB_DEVICE_CALLBACK_LPMNYET,
    USB_DEVICE_CALLBACK_LPMSUSP,
    USB_DEVICE_CALLBACK_N,
};

/**
 * \brief Enumeration for the possible callback types for the USB endpoint in device module
 */
enum usb_device_endpoint_callback {
    USB_DEVICE_ENDPOINT_CALLBACK_TRCPT,
    USB_DEVICE_ENDPOINT_CALLBACK_TRFAIL,
    USB_DEVICE_ENDPOINT_CALLBACK_RXSTP,
    USB_DEVICE_ENDPOINT_CALLBACK_STALL,
    USB_DEVICE_EP_CALLBACK_N,
};

/**
 * \brief Device Endpoint types.
 */
enum usb_device_endpoint_type {
    USB_DEVICE_ENDPOINT_TYPE_DISABLE,
    USB_DEVICE_ENDPOINT_TYPE_CONTROL,
    USB_DEVICE_ENDPOINT_TYPE_ISOCHRONOUS,
    USB_DEVICE_ENDPOINT_TYPE_BULK,
    USB_DEVICE_ENDPOINT_TYPE_INTERRUPT,
};

/**
 * \brief Endpoint Size
 */
enum usb_endpoint_size {
    USB_ENDPOINT_8_BYTE,
    USB_ENDPOINT_16_BYTE,
    USB_ENDPOINT_32_BYTE,
    USB_ENDPOINT_64_BYTE,
    USB_ENDPOINT_128_BYTE,
    USB_ENDPOINT_256_BYTE,
    USB_ENDPOINT_512_BYTE,
    USB_ENDPOINT_1023_BYTE,
};

/**
 * \brief Link Power Management Handshake.
 */
enum usb_device_lpm_mode {
    USB_DEVICE_LPM_NOT_SUPPORT,
    USB_DEVICE_LPM_ACK,
    USB_DEVICE_LPM_NYET,
};

/**
 * \brief Module structure
 */
struct usb_module;

/**
 * \name Host Callback Functions Types
 * @{
 */
typedef void (*usb_host_callback_t)(struct usb_module *module_inst);
typedef void (*usb_host_pipe_callback_t)(struct usb_module *module_inst, void *);
/** @} */

/**
 * \name Device Callback Functions Types
 * @{
 */
typedef void (*usb_device_callback_t)(struct usb_module *module_inst, void *pointer);
typedef void (*usb_device_endpoint_callback_t)(struct usb_module *module_inst, void *pointer);
/** @} */

/** USB configurations */
struct usb_config {
    /** \c true for host, \c false for device. */
    bool select_host_mode;
    /** When \c true the module is enabled during standby. */
    bool run_in_standby;
    /** Generic Clock Generator source channel. */
    // enum gclk_generator source_generator;
    uint8_t source_generator;
    /** Speed mode */
    // enum usb_speed speed_mode;
    uint8_t speed_mode;
};

/**
 * \brief USB software module instance structure.
 *
 * USB software module instance structure, used to retain software state
 * information of an associated hardware module instance.
 *
 */
struct usb_module {
    /** Hardware module pointer of the associated USB peripheral. */
    Usb *hw;

    /** Array to store device related callback functions */
    usb_device_callback_t          device_callback[USB_DEVICE_CALLBACK_N];
    usb_device_endpoint_callback_t device_endpoint_callback[USB_EPT_NUM][USB_DEVICE_EP_CALLBACK_N];
    /** Bit mask for device callbacks registered */
    uint16_t device_registered_callback_mask;
    /** Bit mask for device callbacks enabled */
    uint16_t device_enabled_callback_mask;
    /** Bit mask for device endpoint callbacks registered */
    uint8_t device_endpoint_registered_callback_mask[USB_EPT_NUM];
    /** Bit mask for device endpoint callbacks enabled */
    uint8_t device_endpoint_enabled_callback_mask[USB_EPT_NUM];
};

/** USB device endpoint configurations */
struct usb_device_endpoint_config {
    /** device address */
    uint8_t ep_address;
    /** endpoint size */
    enum usb_endpoint_size ep_size;
    /** automatic zero length packet mode, \c true to enable */
    bool auto_zlp;
    /** type of endpoint with Bank */
    enum usb_device_endpoint_type ep_type;
};

/** USB device endpoint callback status parameter structure */
struct usb_endpoint_callback_parameter {
    uint16_t received_bytes;
    uint16_t sent_bytes;
    uint16_t out_buffer_size;
    uint8_t  endpoint_address;
};

void usb_enable(struct usb_module *module_inst);
void usb_disable(struct usb_module *module_inst);

/**
 * \brief Get the status of USB module's state machine
 *
 * \param module_inst Pointer to USB module instance
 */
static inline uint8_t usb_get_state_machine_status(struct usb_module *module_inst) {
    /* Sanity check arguments */
    Assert(module_inst);
    Assert(module_inst->hw);

    return module_inst->hw->DEVICE.FSMSTATUS.reg;
}

void             usb_get_config_defaults(struct usb_config *module_config);
enum status_code usb_init(struct usb_module *module_inst, Usb *const hw, struct usb_config *module_config);

/**
 * \brief Attach USB device to the bus
 *
 * \param module_inst Pointer to USB device module instance
 */
static inline void usb_device_attach(struct usb_module *module_inst) {
    module_inst->hw->DEVICE.CTRLB.reg &= ~USB_DEVICE_CTRLB_DETACH;
}

/**
 * \brief Detach USB device from the bus
 *
 * \param module_inst Pointer to USB device module instance
 */
static inline void usb_device_detach(struct usb_module *module_inst) {
    module_inst->hw->DEVICE.CTRLB.reg |= USB_DEVICE_CTRLB_DETACH;
}

/**
 * \brief Get the speed mode of USB device
 *
 * \param module_inst Pointer to USB device module instance
 * \return USB Speed mode (\ref usb_speed).
 */
static inline enum usb_speed usb_device_get_speed(struct usb_module *module_inst) {
    if (!(module_inst->hw->DEVICE.STATUS.reg & USB_DEVICE_STATUS_SPEED_Msk)) {
        return USB_SPEED_FULL;
    } else {
        return USB_SPEED_LOW;
    }
}

/**
 * \brief Get the address of USB device
 *
 * \param module_inst Pointer to USB device module instance
 * \return USB device address value.
 */
static inline uint8_t usb_device_get_address(struct usb_module *module_inst) {
    return ((uint8_t)(module_inst->hw->DEVICE.DADD.bit.DADD));
}

/**
 * \brief Set the speed mode of USB device
 *
 * \param module_inst Pointer to USB device module instance
 * \param address     USB device address value
 */
static inline void usb_device_set_address(struct usb_module *module_inst, uint8_t address) {
    module_inst->hw->DEVICE.DADD.reg = USB_DEVICE_DADD_ADDEN | address;
}

/**
 * \brief Get the frame number of USB device
 *
 * \param module_inst Pointer to USB device module instance
 * \return USB device frame number value.
 */
static inline uint16_t usb_device_get_frame_number(struct usb_module *module_inst) {
    return ((uint16_t)(module_inst->hw->DEVICE.FNUM.bit.FNUM));
}

/**
 * \brief Get the micro-frame number of USB device
 *
 * \param module_inst Pointer to USB device module instance
 * \return USB device micro-frame number value.
 */
static inline uint16_t usb_device_get_micro_frame_number(struct usb_module *module_inst) {
    return ((uint16_t)(module_inst->hw->DEVICE.FNUM.reg));
}

/**
 * \brief USB device send the resume wakeup
 *
 * \param module_inst Pointer to USB device module instance
 */
static inline void usb_device_send_remote_wake_up(struct usb_module *module_inst) {
    module_inst->hw->DEVICE.CTRLB.reg |= USB_DEVICE_CTRLB_UPRSM;
}

/**
 * \brief USB device set the LPM mode
 *
 * \param module_inst Pointer to USB device module instance
 * \param lpm_mode    LPM mode
 */
static inline void usb_device_set_lpm_mode(struct usb_module *module_inst, enum usb_device_lpm_mode lpm_mode) {
    module_inst->hw->DEVICE.CTRLB.bit.LPMHDSK = lpm_mode;
}

/**
 * \name USB Device Callback Management
 * @{
 */
enum status_code usb_device_register_callback(struct usb_module *module_inst, enum usb_device_callback callback_type, usb_device_callback_t callback_func);
enum status_code usb_device_unregister_callback(struct usb_module *module_inst, enum usb_device_callback callback_type);
enum status_code usb_device_enable_callback(struct usb_module *module_inst, enum usb_device_callback callback_type);
enum status_code usb_device_disable_callback(struct usb_module *module_inst, enum usb_device_callback callback_type);
/** @} */

/**
 * \name USB Device Endpoint Configuration
 * @{
 */
void             usb_device_endpoint_get_config_defaults(struct usb_device_endpoint_config *ep_config);
enum status_code usb_device_endpoint_set_config(struct usb_module *module_inst, struct usb_device_endpoint_config *ep_config);
bool             usb_device_endpoint_is_configured(struct usb_module *module_inst, uint8_t ep);
/** @} */

/**
 * \name USB Device Endpoint Callback Management
 * @{
 */
enum status_code usb_device_endpoint_register_callback(struct usb_module *module_inst, uint8_t ep_num, enum usb_device_endpoint_callback callback_type, usb_device_endpoint_callback_t callback_func);
enum status_code usb_device_endpoint_unregister_callback(struct usb_module *module_inst, uint8_t ep_num, enum usb_device_endpoint_callback callback_type);
enum status_code usb_device_endpoint_enable_callback(struct usb_module *module_inst, uint8_t ep, enum usb_device_endpoint_callback callback_type);
enum status_code usb_device_endpoint_disable_callback(struct usb_module *module_inst, uint8_t ep, enum usb_device_endpoint_callback callback_type);
/** @} */

/**
 * \name USB Device Endpoint Job Management
 * @{
 */
enum status_code usb_device_endpoint_write_buffer_job(struct usb_module *module_inst, uint8_t ep_num, uint8_t *pbuf, uint32_t buf_size);
enum status_code usb_device_endpoint_read_buffer_job(struct usb_module *module_inst, uint8_t ep_num, uint8_t *pbuf, uint32_t buf_size);
enum status_code usb_device_endpoint_setup_buffer_job(struct usb_module *module_inst, uint8_t *pbuf);
void             usb_device_endpoint_abort_job(struct usb_module *module_inst, uint8_t ep);
/** @} */

/**
 * \name USB Device Endpoint Operations
 * @{
 */

bool usb_device_endpoint_is_halted(struct usb_module *module_inst, uint8_t ep);
void usb_device_endpoint_set_halt(struct usb_module *module_inst, uint8_t ep);
void usb_device_endpoint_clear_halt(struct usb_module *module_inst, uint8_t ep);

/** @} */

#ifdef __cplusplus
}
#endif

#endif /* USB_H_INCLUDED */