path: root/tmk_core/protocol/arm_atsam/usb/udc.c

/**
 * \file
 *
 * \brief USB Device Controller (UDC)
 *
 * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */
/*
 * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
 */

#include "conf_usb.h"
#include "usb_protocol.h"
#include "udd.h"
#include "udc_desc.h"
#include "udi_device_conf.h"
#include "udi.h"
#include "udc.h"
#include "md_bootloader.h"

/**
 * \ingroup udc_group
 * \defgroup udc_group_interne Implementation of UDC
 *
 * Internal implementation
 * @{
 */

//! \name Internal variables to manage the USB device
//! @{

//! Device status state (see enum usb_device_status in usb_protocol.h)
static le16_t udc_device_status;

COMPILER_WORD_ALIGNED
//! Device interface setting value
static uint8_t udc_iface_setting = 0;

//! Device Configuration number selected by the USB host
COMPILER_WORD_ALIGNED
static uint8_t udc_num_configuration = 0;

//! Pointer on the selected speed device configuration
static udc_config_speed_t UDC_DESC_STORAGE *udc_ptr_conf;

//! Pointer on interface descriptor used by SETUP request.
static usb_iface_desc_t UDC_DESC_STORAGE *udc_ptr_iface;

//! @}

//! \name Internal structure to store the USB device main strings
//! @{

/**
 * \brief Language ID of USB device (US ID by default)
 */
COMPILER_WORD_ALIGNED
static UDC_DESC_STORAGE usb_str_lgid_desc_t udc_string_desc_languageid = {.desc.bLength = sizeof(usb_str_lgid_desc_t), .desc.bDescriptorType = USB_DT_STRING, .string = {LE16(USB_LANGID_EN_US)}};

/**
 * \brief USB device manufacture name storage
 * String is allocated only if USB_DEVICE_MANUFACTURE_NAME is declared
 * by usb application configuration
 */
#ifdef USB_DEVICE_MANUFACTURE_NAME
static uint8_t udc_string_manufacturer_name[] = USB_DEVICE_MANUFACTURE_NAME;
#    define USB_DEVICE_MANUFACTURE_NAME_SIZE (sizeof(udc_string_manufacturer_name) - 1)
#else
#    define USB_DEVICE_MANUFACTURE_NAME_SIZE 0
#endif

/**
 * \brief USB device product name storage
 * String is allocated only if USB_DEVICE_PRODUCT_NAME is declared
 * by usb application configuration
 */
#ifdef USB_DEVICE_PRODUCT_NAME
static uint8_t udc_string_product_name[] = USB_DEVICE_PRODUCT_NAME;
#    define USB_DEVICE_PRODUCT_NAME_SIZE (sizeof(udc_string_product_name) - 1)
#else
#    define USB_DEVICE_PRODUCT_NAME_SIZE 0
#endif

#if defined USB_DEVICE_SERIAL_NAME
#    define USB_DEVICE_SERIAL_NAME_SIZE (sizeof(USB_DEVICE_SERIAL_NAME) - 1)
#else
#    define USB_DEVICE_SERIAL_NAME_SIZE 0
#endif

uint8_t     usb_device_serial_name_size = 0;
#if defined USB_DEVICE_SERIAL_USE_BOOTLOADER_SERIAL
uint8_t     bootloader_serial_number[BOOTLOADER_SERIAL_MAX_SIZE + 1] = "";
#endif
static const uint8_t *udc_get_string_serial_name(void) {
#if defined           USB_DEVICE_SERIAL_USE_BOOTLOADER_SERIAL
    uint32_t serial_ptrloc  = (uint32_t)&_srom - 4;
    uint32_t serial_address = *(uint32_t *)serial_ptrloc;  // Address of bootloader's serial number if available

    if (serial_address != 0xFFFFFFFF && serial_address < serial_ptrloc)  // Check for factory programmed serial address
    {
        if ((serial_address & 0xFF) % 4 == 0)  // Check alignment
        {
            uint16_t *serial_use    = (uint16_t *)(serial_address);  // Point to address of string in rom
            uint8_t   serial_length = 0;

            while ((*(serial_use + serial_length) > 32 && *(serial_use + serial_length) < 127) && serial_length < BOOTLOADER_SERIAL_MAX_SIZE) {
                bootloader_serial_number[serial_length] = *(serial_use + serial_length) & 0xFF;
                serial_length++;
            }
            bootloader_serial_number[serial_length] = 0;

            usb_device_serial_name_size = serial_length;

            return bootloader_serial_number;  // Use serial programmed into bootloader rom
        }
    }
#endif

    usb_device_serial_name_size = USB_DEVICE_SERIAL_NAME_SIZE;

#if defined USB_DEVICE_SERIAL_NAME
    return (const uint8_t *)USB_DEVICE_SERIAL_NAME;  // Use serial supplied by keyboard's config.h
#else
    return 0;  // No serial supplied
#endif
}

/**
 * \brief USB device string descriptor
 * Structure used to transfer ASCII strings to USB String descriptor structure.
 */
#ifndef BOOTLOADER_SERIAL_MAX_SIZE
#    define BOOTLOADER_SERIAL_MAX_SIZE 0
#endif  // BOOTLOADER_SERIAL_MAX_SIZE
struct udc_string_desc_t {
    usb_str_desc_t header;
    le16_t         string[Max(Max(Max(USB_DEVICE_MANUFACTURE_NAME_SIZE, USB_DEVICE_PRODUCT_NAME_SIZE), USB_DEVICE_SERIAL_NAME_SIZE), BOOTLOADER_SERIAL_MAX_SIZE)];
};
COMPILER_WORD_ALIGNED
static UDC_DESC_STORAGE struct udc_string_desc_t udc_string_desc = {.header.bDescriptorType = USB_DT_STRING};
//! @}

usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void) { return udc_ptr_iface; }

/**
 * \brief Returns a value to check the end of USB Configuration descriptor
 *
 * \return address after the last byte of USB Configuration descriptor
 */
static usb_conf_desc_t UDC_DESC_STORAGE *udc_get_eof_conf(void) { return (UDC_DESC_STORAGE usb_conf_desc_t *)((uint8_t *)udc_ptr_conf->desc + le16_to_cpu(udc_ptr_conf->desc->wTotalLength)); }

#if (0 != USB_DEVICE_MAX_EP)
/**
 * \brief Search specific descriptor in global interface descriptor
 *
 * \param desc       Address of interface descriptor
 *                   or previous specific descriptor found
 * \param desc_id    Descriptor ID to search
 *
 * \return address of specific descriptor found
 * \return NULL if it is the end of global interface descriptor
 */
static usb_conf_desc_t UDC_DESC_STORAGE *udc_next_desc_in_iface(usb_conf_desc_t UDC_DESC_STORAGE *desc, uint8_t desc_id) {
    usb_conf_desc_t UDC_DESC_STORAGE *ptr_eof_desc;

    ptr_eof_desc = udc_get_eof_conf();
    // Go to next descriptor
    desc = (UDC_DESC_STORAGE usb_conf_desc_t *)((uint8_t *)desc + desc->bLength);
    // Check the end of configuration descriptor
    while (ptr_eof_desc > desc) {
        // If new interface descriptor is found,
        // then it is the end of the current global interface descriptor
        if (USB_DT_INTERFACE == desc->bDescriptorType) {
            break;  // End of global interface descriptor
        }
        if (desc_id == desc->bDescriptorType) {
            return desc;  // Specific descriptor found
        }
        // Go to next descriptor
        desc = (UDC_DESC_STORAGE usb_conf_desc_t *)((uint8_t *)desc + desc->bLength);
    }
    return NULL;  // No specific descriptor found
}
#endif

/**
 * \brief Search an interface descriptor
 * This routine updates the internal pointer udc_ptr_iface.
 *
 * \param iface_num     Interface number to find in Configuration Descriptor
 * \param setting_num   Setting number of interface to find
 *
 * \return 1 if found or 0 if not found
 */
static bool udc_update_iface_desc(uint8_t iface_num, uint8_t setting_num) {
    usb_conf_desc_t UDC_DESC_STORAGE *ptr_end_desc;

    if (0 == udc_num_configuration) {
        return false;
    }

    if (iface_num >= udc_ptr_conf->desc->bNumInterfaces) {
        return false;
    }

    // Start at the beginning of configuration descriptor
    udc_ptr_iface = (UDC_DESC_STORAGE usb_iface_desc_t *)udc_ptr_conf->desc;

    // Check the end of configuration descriptor
    ptr_end_desc = udc_get_eof_conf();
    while (ptr_end_desc > (UDC_DESC_STORAGE usb_conf_desc_t *)udc_ptr_iface) {
        if (USB_DT_INTERFACE == udc_ptr_iface->bDescriptorType) {
            // A interface descriptor is found
            // Check interface and alternate setting number
            if ((iface_num == udc_ptr_iface->bInterfaceNumber) && (setting_num == udc_ptr_iface->bAlternateSetting)) {
                return true;  // Interface found
            }
        }
        // Go to next descriptor
        udc_ptr_iface = (UDC_DESC_STORAGE usb_iface_desc_t *)((uint8_t *)udc_ptr_iface + udc_ptr_iface->bLength);
    }
    return false;  // Interface not found
}

/**
 * \brief Disables an usb device interface (UDI)
 * This routine call the UDI corresponding to interface number
 *
 * \param iface_num     Interface number to disable
 *
 * \return 1 if it is done or 0 if interface is not found
 */
static bool udc_iface_disable(uint8_t iface_num) {
    udi_api_t UDC_DESC_STORAGE *udi_api;

    // Select first alternate setting of the interface
    // to update udc_ptr_iface before call iface->getsetting()
    if (!udc_update_iface_desc(iface_num, 0)) {
        return false;
    }

    // Select the interface with the current alternate setting
    udi_api = udc_ptr_conf->udi_apis[iface_num];

#if (0 != USB_DEVICE_MAX_EP)
    if (!udc_update_iface_desc(iface_num, udi_api->getsetting())) {
        return false;
    }

    // Start at the beginning of interface descriptor
    {
        usb_ep_desc_t UDC_DESC_STORAGE *ep_desc;
        ep_desc = (UDC_DESC_STORAGE usb_ep_desc_t *)udc_ptr_iface;
        while (1) {
            // Search Endpoint descriptor included in global interface descriptor
            ep_desc = (UDC_DESC_STORAGE usb_ep_desc_t *)udc_next_desc_in_iface((UDC_DESC_STORAGE usb_conf_desc_t *)ep_desc, USB_DT_ENDPOINT);
            if (NULL == ep_desc) {
                break;
            }
            // Free the endpoint used by the interface
            udd_ep_free(ep_desc->bEndpointAddress);
        }
    }
#endif

    // Disable interface
    udi_api->disable();
    return true;
}

/**
 * \brief Enables an usb device interface (UDI)
 * This routine calls the UDI corresponding
 * to the interface and setting number.
 *
 * \param iface_num     Interface number to enable
 * \param setting_num   Setting number to enable
 *
 * \return 1 if it is done or 0 if interface is not found
 */
static bool udc_iface_enable(uint8_t iface_num, uint8_t setting_num) {
    // Select the interface descriptor
    if (!udc_update_iface_desc(iface_num, setting_num)) {
        return false;
    }

#if (0 != USB_DEVICE_MAX_EP)
    usb_ep_desc_t UDC_DESC_STORAGE *ep_desc;

    // Start at the beginning of the global interface descriptor
    ep_desc = (UDC_DESC_STORAGE usb_ep_desc_t *)udc_ptr_iface;
    while (1) {
        // Search Endpoint descriptor included in the global interface descriptor
        ep_desc = (UDC_DESC_STORAGE usb_ep_desc_t *)udc_next_desc_in_iface((UDC_DESC_STORAGE usb_conf_desc_t *)ep_desc, USB_DT_ENDPOINT);
        if (NULL == ep_desc) break;
        // Alloc the endpoint used by the interface
        if (!udd_ep_alloc(ep_desc->bEndpointAddress, ep_desc->bmAttributes, le16_to_cpu(ep_desc->wMaxPacketSize))) {
            return false;
        }
    }
#endif
    // Enable the interface
    return udc_ptr_conf->udi_apis[iface_num]->enable();
}

/*! \brief Start the USB Device stack
 */
void udc_start(void) { udd_enable(); }

/*! \brief Stop the USB Device stack
 */
void udc_stop(void) {
    udd_disable();
    udc_reset();
}

/**
 * \brief Reset the current configuration of the USB device,
 * This routines can be called by UDD when a RESET on the USB line occurs.
 */
void udc_reset(void) {
    uint8_t iface_num;

    if (udc_num_configuration) {
        for (iface_num = 0; iface_num < udc_ptr_conf->desc->bNumInterfaces; iface_num++) {
            udc_iface_disable(iface_num);
        }
    }
    udc_num_configuration = 0;
#if (USB_CONFIG_ATTR_REMOTE_WAKEUP == (USB_DEVICE_ATTR & USB_CONFIG_ATTR_REMOTE_WAKEUP))
    if (CPU_TO_LE16(USB_DEV_STATUS_REMOTEWAKEUP) & udc_device_status) {
        // Remote wakeup is enabled then disable it
        UDC_REMOTEWAKEUP_DISABLE();
    }
#endif
    udc_device_status =
#if (USB_DEVICE_ATTR & USB_CONFIG_ATTR_SELF_POWERED)
        CPU_TO_LE16(USB_DEV_STATUS_SELF_POWERED);
#else
        CPU_TO_LE16(USB_DEV_STATUS_BUS_POWERED);
#endif
}

void udc_sof_notify(void) {
    uint8_t iface_num;

    if (udc_num_configuration) {
        for (iface_num = 0; iface_num < udc_ptr_conf->desc->bNumInterfaces; iface_num++) {
            if (udc_ptr_conf->udi_apis[iface_num]->sof_notify != NULL) {
                udc_ptr_conf->udi_apis[iface_num]->sof_notify();
            }
        }
    }
}

/**
 * \brief Standard device request to get device status
 *
 * \return true if success
 */
static bool udc_req_std_dev_get_status(void) {
    if (udd_g_ctrlreq.req.wLength != sizeof(udc_device_status)) {
        return false;
    }

    udd_set_setup_payload((uint8_t *)&udc_device_status, sizeof(udc_device_status));
    return true;
}

#if (0 != USB_DEVICE_MAX_EP)
/**
 * \brief Standard endpoint request to get endpoint status
 *
 * \return true if success
 */
static bool udc_req_std_ep_get_status(void) {
    static le16_t udc_ep_status;

    if (udd_g_ctrlreq.req.wLength != sizeof(udc_ep_status)) {
        return false;
    }

    udc_ep_status = udd_ep_is_halted(udd_g_ctrlreq.req.wIndex & 0xFF) ? CPU_TO_LE16(USB_EP_STATUS_HALTED) : 0;

    udd_set_setup_payload((uint8_t *)&udc_ep_status, sizeof(udc_ep_status));
    return true;
}
#endif

/**
 * \brief Standard device request to change device status
 *
 * \return true if success
 */
static bool udc_req_std_dev_clear_feature(void) {
    if (udd_g_ctrlreq.req.wLength) {
        return false;
    }

    if (udd_g_ctrlreq.req.wValue == USB_DEV_FEATURE_REMOTE_WAKEUP) {
        udc_device_status &= CPU_TO_LE16(~(uint32_t)USB_DEV_STATUS_REMOTEWAKEUP);
#if (USB_CONFIG_ATTR_REMOTE_WAKEUP == (USB_DEVICE_ATTR & USB_CONFIG_ATTR_REMOTE_WAKEUP))
        UDC_REMOTEWAKEUP_DISABLE();
#endif
        return true;
    }
    return false;
}

#if (0 != USB_DEVICE_MAX_EP)
/**
 * \brief Standard endpoint request to clear endpoint feature
 *
 * \return true if success
 */
static bool udc_req_std_ep_clear_feature(void) {
    if (udd_g_ctrlreq.req.wLength) {
        return false;
    }

    if (udd_g_ctrlreq.req.wValue == USB_EP_FEATURE_HALT) {
        return udd_ep_clear_halt(udd_g_ctrlreq.req.wIndex & 0xFF);
    }
    return false;
}
#endif

/**
 * \brief Standard device request to set a feature
 *
 * \return true if success
 */
static bool udc_req_std_dev_set_feature(void) {
    if (udd_g_ctrlreq.req.wLength) {
        return false;
    }

    switch (udd_g_ctrlreq.req.wValue) {
        case USB_DEV_FEATURE_REMOTE_WAKEUP:
#if (USB_CONFIG_ATTR_REMOTE_WAKEUP == (USB_DEVICE_ATTR & USB_CONFIG_ATTR_REMOTE_WAKEUP))
            udc_device_status |= CPU_TO_LE16(USB_DEV_STATUS_REMOTEWAKEUP);
            UDC_REMOTEWAKEUP_ENABLE();
            return true;
#else
            return false;
#endif

#ifdef USB_DEVICE_HS_SUPPORT
        case USB_DEV_FEATURE_TEST_MODE:
            if (!udd_is_high_speed()) {
                break;
            }
            if (udd_g_ctrlreq.req.wIndex & 0xff) {
                break;
            }
            // Unconfigure the device, terminating all ongoing requests
            udc_reset();
            switch ((udd_g_ctrlreq.req.wIndex >> 8) & 0xFF) {
                case USB_DEV_TEST_MODE_J:
                    udd_g_ctrlreq.callback = udd_test_mode_j;
                    return true;

                case USB_DEV_TEST_MODE_K:
                    udd_g_ctrlreq.callback = udd_test_mode_k;
                    return true;

                case USB_DEV_TEST_MODE_SE0_NAK:
                    udd_g_ctrlreq.callback = udd_test_mode_se0_nak;
                    return true;

                case USB_DEV_TEST_MODE_PACKET:
                    udd_g_ctrlreq.callback = udd_test_mode_packet;
                    return true;

                case USB_DEV_TEST_MODE_FORCE_ENABLE:  // Only for downstream facing hub ports
                default:
                    break;
            }
            break;
#endif
        default:
            break;
    }
    return false;
}

/**
 * \brief Standard endpoint request to halt an endpoint
 *
 * \return true if success
 */
#if (0 != USB_DEVICE_MAX_EP)
static bool udc_req_std_ep_set_feature(void) {
    if (udd_g_ctrlreq.req.wLength) {
        return false;
    }
    if (udd_g_ctrlreq.req.wValue == USB_EP_FEATURE_HALT) {
        udd_ep_abort(udd_g_ctrlreq.req.wIndex & 0xFF);
        return udd_ep_set_halt(udd_g_ctrlreq.req.wIndex & 0xFF);
    }
    return false;
}
#endif

/**
 * \brief Change the address of device
 * Callback called at the end of request set address
 */
static void udc_valid_address(void) { udd_set_address(udd_g_ctrlreq.req.wValue & 0x7F); }

/**
 * \brief Standard device request to set device address
 *
 * \return true if success
 */
static bool udc_req_std_dev_set_address(void) {
    if (udd_g_ctrlreq.req.wLength) {
        return false;
    }

    // The address must be changed at the end of setup request after the handshake
    // then we use a callback to change address
    udd_g_ctrlreq.callback = udc_valid_address;
    return true;
}

/**
 * \brief Standard device request to get device string descriptor
 *
 * \return true if success
 */
static bool udc_req_std_dev_get_str_desc(void) {
    uint8_t        i;
    const uint8_t *str;
    uint8_t        str_length = 0;

    // Link payload pointer to the string corresponding at request
    switch (udd_g_ctrlreq.req.wValue & 0xff) {
        case 0:
            udd_set_setup_payload((uint8_t *)&udc_string_desc_languageid, sizeof(udc_string_desc_languageid));
            break;

#ifdef USB_DEVICE_MANUFACTURE_NAME
        case 1:
            str_length = USB_DEVICE_MANUFACTURE_NAME_SIZE;
            str        = udc_string_manufacturer_name;
            break;
#endif
#ifdef USB_DEVICE_PRODUCT_NAME
        case 2:
            str_length = USB_DEVICE_PRODUCT_NAME_SIZE;
            str        = udc_string_product_name;
            break;
#endif
        case 3:
            str        = udc_get_string_serial_name();
            str_length = usb_device_serial_name_size;
            break;
        default:
#ifdef UDC_GET_EXTRA_STRING
            if (UDC_GET_EXTRA_STRING()) {
                break;
            }
#endif
            return false;
    }

    if (str_length) {
        for (i = 0; i < str_length; i++) {
            udc_string_desc.string[i] = cpu_to_le16((le16_t)str[i]);
        }

        udc_string_desc.header.bLength = 2 + (str_length)*2;
        udd_set_setup_payload((uint8_t *)&udc_string_desc, udc_string_desc.header.bLength);
    }

    return true;
}

/**
 * \brief Standard device request to get descriptors about USB device
 *
 * \return true if success
 */
static bool udc_req_std_dev_get_descriptor(void) {
    uint8_t conf_num;

    conf_num = udd_g_ctrlreq.req.wValue & 0xff;

    // Check descriptor ID
    switch ((uint8_t)(udd_g_ctrlreq.req.wValue >> 8)) {
        case USB_DT_DEVICE:
            // Device descriptor requested
#ifdef USB_DEVICE_HS_SUPPORT
            if (!udd_is_high_speed()) {
                udd_set_setup_payload((uint8_t *)udc_config.confdev_hs, udc_config.confdev_hs->bLength);
            } else
#endif
            {
                udd_set_setup_payload((uint8_t *)udc_config.confdev_lsfs, udc_config.confdev_lsfs->bLength);
            }
            break;

        case USB_DT_CONFIGURATION:
            // Configuration descriptor requested
#ifdef USB_DEVICE_HS_SUPPORT
            if (udd_is_high_speed()) {
                // HS descriptor
                if (conf_num >= udc_config.confdev_hs->bNumConfigurations) {
                    return false;
                }
                udd_set_setup_payload((uint8_t *)udc_config.conf_hs[conf_num].desc, le16_to_cpu(udc_config.conf_hs[conf_num].desc->wTotalLength));
            } else
#endif
            {
                // FS descriptor
                if (conf_num >= udc_config.confdev_lsfs->bNumConfigurations) {
                    return false;
                }
                udd_set_setup_payload((uint8_t *)udc_config.conf_lsfs[conf_num].desc, le16_to_cpu(udc_config.conf_lsfs[conf_num].desc->wTotalLength));
            }
            ((usb_conf_desc_t *)udd_g_ctrlreq.payload)->bDescriptorType = USB_DT_CONFIGURATION;
            break;

#ifdef USB_DEVICE_HS_SUPPORT
        case USB_DT_DEVICE_QUALIFIER:
            // Device qualifier descriptor requested
            udd_set_setup_payload((uint8_t *)udc_config.qualifier, udc_config.qualifier->bLength);
            break;

        case USB_DT_OTHER_SPEED_CONFIGURATION:
            // Other configuration descriptor requested
            if (!udd_is_high_speed()) {
                // HS descriptor
                if (conf_num >= udc_config.confdev_hs->bNumConfigurations) {
                    return false;
                }
                udd_set_setup_payload((uint8_t *)udc_config.conf_hs[conf_num].desc, le16_to_cpu(udc_config.conf_hs[conf_num].desc->wTotalLength));
            } else {
                // FS descriptor
                if (conf_num >= udc_config.confdev_lsfs->bNumConfigurations) {
                    return false;
                }
                udd_set_setup_payload((uint8_t *)udc_config.conf_lsfs[conf_num].desc, le16_to_cpu(udc_config.conf_lsfs[conf_num].desc->wTotalLength));
            }
            ((usb_conf_desc_t *)udd_g_ctrlreq.payload)->bDescriptorType = USB_DT_OTHER_SPEED_CONFIGURATION;
            break;
#endif

        case USB_DT_BOS:
            // Device BOS descriptor requested
            if (udc_config.conf_bos == NULL) {
                return false;
            }
            udd_set_setup_payload((uint8_t *)udc_config.conf_bos, udc_config.conf_bos->wTotalLength);
            break;

        case USB_DT_STRING:
            // String descriptor requested
            if (!udc_req_std_dev_get_str_desc()) {
                return false;
            }
            break;

        default:
            // Unknown descriptor requested
            return false;
    }
    // if the descriptor is larger than length requested, then reduce it
    if (udd_g_ctrlreq.req.wLength < udd_g_ctrlreq.payload_size) {
        udd_g_ctrlreq.payload_size = udd_g_ctrlreq.req.wLength;
    }
    return true;
}

/**
 * \brief Standard device request to get configuration number
 *
 * \return true if success
 */
static bool udc_req_std_dev_get_configuration(void) {
    if (udd_g_ctrlreq.req.wLength != 1) {
        return false;
    }

    udd_set_setup_payload(&udc_num_configuration, 1);
    return true;
}

/**
 * \brief Standard device request to enable a configuration
 *
 * \return true if success
 */
static bool udc_req_std_dev_set_configuration(void) {
    uint8_t iface_num;

    // Check request length
    if (udd_g_ctrlreq.req.wLength) {
        return false;
    }
    // Authorize configuration only if the address is valid
    if (!udd_getaddress()) {
        return false;
    }
    // Check the configuration number requested
#ifdef USB_DEVICE_HS_SUPPORT
    if (udd_is_high_speed()) {
        // HS descriptor
        if ((udd_g_ctrlreq.req.wValue & 0xFF) > udc_config.confdev_hs->bNumConfigurations) {
            return false;
        }
    } else
#endif
    {
        // FS descriptor
        if ((udd_g_ctrlreq.req.wValue & 0xFF) > udc_config.confdev_lsfs->bNumConfigurations) {
            return false;
        }
    }

    // Reset current configuration
    udc_reset();

    // Enable new configuration
    udc_num_configuration = udd_g_ctrlreq.req.wValue & 0xFF;
    if (udc_num_configuration == 0) {
        return true;  // Default empty configuration requested
    }
    // Update pointer of the configuration descriptor
#ifdef USB_DEVICE_HS_SUPPORT
    if (udd_is_high_speed()) {
        // HS descriptor
        udc_ptr_conf = &udc_config.conf_hs[udc_num_configuration - 1];
    } else
#endif
    {
        // FS descriptor
        udc_ptr_conf = &udc_config.conf_lsfs[udc_num_configuration - 1];
    }
    // Enable all interfaces of the selected configuration
    for (iface_num = 0; iface_num < udc_ptr_conf->desc->bNumInterfaces; iface_num++) {
        if (!udc_iface_enable(iface_num, 0)) {
            return false;
        }
    }
    return true;
}

/**
 * \brief Standard interface request
 * to get the alternate setting number of an interface
 *
 * \return true if success
 */
static bool udc_req_std_iface_get_setting(void) {
    uint8_t   iface_num;
    udi_api_t UDC_DESC_STORAGE *udi_api;

    if (udd_g_ctrlreq.req.wLength != 1) {
        return false;  // Error in request
    }
    if (!udc_num_configuration) {
        return false;  // The device is not is configured state yet
    }

    // Check the interface number included in the request
    iface_num = udd_g_ctrlreq.req.wIndex & 0xFF;
    if (iface_num >= udc_ptr_conf->desc->bNumInterfaces) {
        return false;
    }

    // Select first alternate setting of the interface to update udc_ptr_iface
    // before call iface->getsetting()
    if (!udc_update_iface_desc(iface_num, 0)) {
        return false;
    }
    // Get alternate setting from UDI
    udi_api           = udc_ptr_conf->udi_apis[iface_num];
    udc_iface_setting = udi_api->getsetting();

    // Link value to payload pointer of request
    udd_set_setup_payload(&udc_iface_setting, 1);
    return true;
}

/**
 * \brief Standard interface request
 * to set an alternate setting of an interface
 *
 * \return true if success
 */
static bool udc_req_std_iface_set_setting(void) {
    uint8_t iface_num, setting_num;

    if (udd_g_ctrlreq.req.wLength) {
        return false;  // Error in request
    }
    if (!udc_num_configuration) {
        return false;  // The device is not is configured state yet
    }

    iface_num   = udd_g_ctrlreq.req.wIndex & 0xFF;
    setting_num = udd_g_ctrlreq.req.wValue & 0xFF;

    // Disable current setting
    if (!udc_iface_disable(iface_num)) {
        return false;
    }

    // Enable new setting
    return udc_iface_enable(iface_num, setting_num);
}

/**
 * \brief Main routine to manage the standard USB SETUP request
 *
 * \return true if the request is supported
 */
static bool udc_reqstd(void) {
    if (Udd_setup_is_in()) {
        // GET Standard Requests
        if (udd_g_ctrlreq.req.wLength == 0) {
            return false;  // Error for USB host
        }

        if (USB_REQ_RECIP_DEVICE == Udd_setup_recipient()) {
            // Standard Get Device request
            switch (udd_g_ctrlreq.req.bRequest) {
                case USB_REQ_GET_STATUS:
                    return udc_req_std_dev_get_status();
                case USB_REQ_GET_DESCRIPTOR:
                    return udc_req_std_dev_get_descriptor();
                case USB_REQ_GET_CONFIGURATION:
                    return udc_req_std_dev_get_configuration();
                default:
                    break;
            }
        }

        if (USB_REQ_RECIP_INTERFACE == Udd_setup_recipient()) {
            // Standard Get Interface request
            switch (udd_g_ctrlreq.req.bRequest) {
                case USB_REQ_GET_INTERFACE:
                    return udc_req_std_iface_get_setting();
                default:
                    break;
            }
        }
#if (0 != USB_DEVICE_MAX_EP)
        if (USB_REQ_RECIP_ENDPOINT == Udd_setup_recipient()) {
            // Standard Get Endpoint request
            switch (udd_g_ctrlreq.req.bRequest) {
                case USB_REQ_GET_STATUS:
                    return udc_req_std_ep_get_status();
                default:
                    break;
            }
        }
#endif
    } else {
        // SET Standard Requests
        if (USB_REQ_RECIP_DEVICE == Udd_setup_recipient()) {
            // Standard Set Device request
            switch (udd_g_ctrlreq.req.bRequest) {
                case USB_REQ_SET_ADDRESS:
                    return udc_req_std_dev_set_address();
                case USB_REQ_CLEAR_FEATURE:
                    return udc_req_std_dev_clear_feature();
                case USB_REQ_SET_FEATURE:
                    return udc_req_std_dev_set_feature();
                case USB_REQ_SET_CONFIGURATION:
                    return udc_req_std_dev_set_configuration();
                case USB_REQ_SET_DESCRIPTOR:
                    /* Not supported (defined as optional by the USB 2.0 spec) */
                    break;
                default:
                    break;
            }
        }

        if (USB_REQ_RECIP_INTERFACE == Udd_setup_recipient()) {
            // Standard Set Interface request
            switch (udd_g_ctrlreq.req.bRequest) {
                case USB_REQ_SET_INTERFACE:
                    return udc_req_std_iface_set_setting();
                default:
                    break;
            }
        }
#if (0 != USB_DEVICE_MAX_EP)
        if (USB_REQ_RECIP_ENDPOINT == Udd_setup_recipient()) {
            // Standard Set Endpoint request
            switch (udd_g_ctrlreq.req.bRequest) {
                case USB_REQ_CLEAR_FEATURE:
                    return udc_req_std_ep_clear_feature();
                case USB_REQ_SET_FEATURE:
                    return udc_req_std_ep_set_feature();
                default:
                    break;
            }
        }
#endif
    }
    return false;
}

/**
 * \brief Send the SETUP interface request to UDI
 *
 * \return true if the request is supported
 */
static bool udc_req_iface(void) {
    uint8_t   iface_num;
    udi_api_t UDC_DESC_STORAGE *udi_api;

    if (0 == udc_num_configuration) {
        return false;  // The device is not is configured state yet
    }
    // Check interface number
    iface_num = udd_g_ctrlreq.req.wIndex & 0xFF;
    if (iface_num >= udc_ptr_conf->desc->bNumInterfaces) {
        return false;
    }

    //* To update udc_ptr_iface with the selected interface in request
    // Select first alternate setting of interface to update udc_ptr_iface
    // before calling udi_api->getsetting()
    if (!udc_update_iface_desc(iface_num, 0)) {
        return false;
    }
    // Select the interface with the current alternate setting
    udi_api = udc_ptr_conf->udi_apis[iface_num];
    if (!udc_update_iface_desc(iface_num, udi_api->getsetting())) {
        return false;
    }

    // Send the SETUP request to the UDI corresponding to the interface number
    return udi_api->setup();
}

/**
 * \brief Send the SETUP interface request to UDI
 *
 * \return true if the request is supported
 */
static bool udc_req_ep(void) {
    uint8_t   iface_num;
    udi_api_t UDC_DESC_STORAGE *udi_api;

    if (0 == udc_num_configuration) {
        return false;  // The device is not is configured state yet
    }
    // Send this request on all enabled interfaces
    iface_num = udd_g_ctrlreq.req.wIndex & 0xFF;
    for (iface_num = 0; iface_num < udc_ptr_conf->desc->bNumInterfaces; iface_num++) {
        // Select the interface with the current alternate setting
        udi_api = udc_ptr_conf->udi_apis[iface_num];
        if (!udc_update_iface_desc(iface_num, udi_api->getsetting())) {
            return false;
        }

        // Send the SETUP request to the UDI
        if (udi_api->setup()) {
            return true;
        }
    }
    return false;
}

/**
 * \brief Main routine to manage the USB SETUP request.
 *
 * This function parses a USB SETUP request and submits an appropriate
 * response back to the host or, in the case of SETUP OUT requests
 * with data, sets up a buffer for receiving the data payload.
 *
 * The main standard requests defined by the USB 2.0 standard are handled
 * internally. The interface requests are sent to UDI, and the specific request
 * sent to a specific application callback.
 *
 * \return true if the request is supported, else the request is stalled by UDD
 */
bool udc_process_setup(void) {
    // By default no data (receive/send) and no callbacks registered
    udd_g_ctrlreq.payload_size   = 0;
    udd_g_ctrlreq.callback       = NULL;
    udd_g_ctrlreq.over_under_run = NULL;

    if (Udd_setup_is_in()) {
        if (udd_g_ctrlreq.req.wLength == 0) {
            return false;  // Error from USB host
        }
    }

    // If standard request then try to decode it in UDC
    if (Udd_setup_type() == USB_REQ_TYPE_STANDARD) {
        if (udc_reqstd()) {
            return true;
        }
    }

    // If interface request then try to decode it in UDI
    if (Udd_setup_recipient() == USB_REQ_RECIP_INTERFACE) {
        if (udc_req_iface()) {
            return true;
        }
    }

    // If endpoint request then try to decode it in UDI
    if (Udd_setup_recipient() == USB_REQ_RECIP_ENDPOINT) {
        if (udc_req_ep()) {
            return true;
        }
    }

    // Here SETUP request unknown by UDC and UDIs
#ifdef USB_DEVICE_SPECIFIC_REQUEST
    // Try to decode it in specific callback
    return USB_DEVICE_SPECIFIC_REQUEST();  // Ex: Vendor request,...
#else
    return false;
#endif
}

//! @}