diff options
Diffstat (limited to 'tmk_core/rules.mk')
| -rw-r--r-- | tmk_core/rules.mk | 299 |
1 files changed, 184 insertions, 115 deletions
diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index a0698fa3bb..8cae22b38f 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -58,11 +58,12 @@ # Output format. (can be srec, ihex, binary) FORMAT = ihex +BUILD_DIR = .build # Object files directory # To put object files in current directory, use a dot (.), do NOT make # this an empty or blank macro! -OBJDIR = obj_$(TARGET) +OBJDIR = $(BUILD_DIR)/obj_$(TARGET) # Optimization level, can be [0, 1, 2, 3, s]. @@ -77,6 +78,35 @@ OPT = s # AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. DEBUG = dwarf-2 +COLOR?=true + +ifeq ($(COLOR),true) + NO_COLOR=\033[0m + OK_COLOR=\033[32;01m + ERROR_COLOR=\033[31;01m + WARN_COLOR=\033[33;01m + BLUE=\033[0;34m + BOLD=\033[1m +endif + +OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR) +ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR) +WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR) + +ifndef $(SILENT) + SILENT = false +endif + +TAB_LOG = printf "\n$$LOG\n\n" | awk '{ sub(/^/," | "); print }' +TAB_LOG_PLAIN = printf "$$LOG\n" +AWK_STATUS = awk '{ printf " %-10s\n", $$1; }' +AWK_CMD = awk '{ printf "%-69s", $$0; }' +PRINT_ERROR = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && false +PRINT_WARNING = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) +PRINT_ERROR_PLAIN = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && false +PRINT_WARNING_PLAIN = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) +PRINT_OK = $(SILENT) || printf "$(OK_STRING)" | $(AWK_STATUS) +BUILD_CMD = LOG=$$($(CMD) 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING); else $(PRINT_OK); fi; # List any extra directories to look for include files here. # Each directory must be seperated by a space. @@ -129,6 +159,14 @@ CFLAGS += -fno-inline-small-functions CFLAGS += -fpack-struct CFLAGS += -fshort-enums CFLAGS += -fno-strict-aliasing +# add color +ifeq ($(COLOR),true) +ifeq ("$(shell echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "") + CFLAGS+= -fdiagnostics-color +else ifeq ("$(shell echo "int main(){}" | $(CC) -fcolor-diagnostics -x c - -o /dev/null 2>&1)", "") + CFLAGS+= -fcolor-diagnostics +endif +endif CFLAGS += -Wall CFLAGS += -Wstrict-prototypes #CFLAGS += -mshort-calls @@ -142,9 +180,6 @@ CFLAGS += $(CSTANDARD) ifdef CONFIG_H CFLAGS += -include $(CONFIG_H) endif -ifdef CONFIG_USER_H - CFLAGS += -include $(CONFIG_USER_H) -endif #---------------- Compiler Options C++ ---------------- @@ -179,9 +214,6 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) ifdef CONFIG_H CPPFLAGS += -include $(CONFIG_H) endif -ifdef CONFIG_USER_H - CPPFLAGS += -include $(CONFIG_USER_H) -endif #---------------- Assembler Options ---------------- @@ -198,10 +230,6 @@ ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) ifdef CONFIG_H ASFLAGS += -include $(CONFIG_H) endif -ifdef CONFIG_USER_H - ASFLAGS += -include $(CONFIG_USER_H) -endif - #---------------- Library Options ---------------- # Minimalistic printf version @@ -261,7 +289,7 @@ EXTMEMOPTS = # Comennt out "--relax" option to avoid a error such: # (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12' # -LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS = -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref #LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) @@ -317,6 +345,7 @@ REMOVE = rm -f REMOVEDIR = rmdir COPY = cp WINSHELL = cmd +SECHO = $(SILENT) || echo # Autodecct teensy loader ifneq (, $(shell which teensy-loader-cli 2>/dev/null)) TEENSY_LOADER_CLI = teensy-loader-cli @@ -338,8 +367,8 @@ MSG_EEPROM = Creating load file for EEPROM: MSG_EXTENDED_LISTING = Creating Extended Listing: MSG_SYMBOL_TABLE = Creating Symbol Table: MSG_LINKING = Linking: -MSG_COMPILING = Compiling C: -MSG_COMPILING_CPP = Compiling C++: +MSG_COMPILING = Compiling: +MSG_COMPILING_CPP = Compiling: MSG_ASSEMBLING = Assembling: MSG_CLEANING = Cleaning project: MSG_CREATING_LIBRARY = Creating library: @@ -356,7 +385,7 @@ LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst # Compiler flags to generate dependency files. #GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d -GENDEPFLAGS = -MMD -MP -MF .dep/$(subst /,_,$@).d +GENDEPFLAGS = -MMD -MP -MF $(BUILD_DIR)/.dep/$(subst /,_,$@).d # Combine all necessary flags and optional flags. @@ -366,29 +395,36 @@ ALL_CFLAGS = -mmcu=$(MCU) $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS) ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS) ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS) - - - - # Default target. all: - $(MAKE) begin - $(MAKE) gccversion - $(MAKE) sizebefore - $(MAKE) build - $(MAKE) sizeafter - $(MAKE) end + @$(MAKE) begin + @$(MAKE) gccversion + @$(MAKE) sizebefore + @$(MAKE) clean_list # force clean each time + @$(MAKE) build + @$(MAKE) sizeafter + @$(MAKE) end + +# Quick make that doesn't clean +quick: + @$(MAKE) begin + @$(MAKE) gccversion + @$(MAKE) sizebefore + @$(MAKE) build + @$(MAKE) sizeafter + @$(MAKE) end # Change the build target to build a HEX file or a library. -build: elf hex eep lss sym +build: elf hex +#build: elf hex eep lss sym #build: lib -elf: $(TARGET).elf -hex: $(TARGET).hex -eep: $(TARGET).eep -lss: $(TARGET).lss -sym: $(TARGET).sym +elf: $(BUILD_DIR)/$(TARGET).elf +hex: $(BUILD_DIR)/$(TARGET).hex +eep: $(BUILD_DIR)/$(TARGET).eep +lss: $(BUILD_DIR)/$(TARGET).lss +sym: $(BUILD_DIR)/$(TARGET).sym LIBNAME=lib$(TARGET).a lib: $(LIBNAME) @@ -398,71 +434,81 @@ lib: $(LIBNAME) # AVR Studio 3.x does not check make's exit code but relies on # the following magic strings to be generated by the compile job. begin: - @echo $(MSG_BEGIN) + @$(SECHO) $(MSG_BEGIN) end: - @echo $(MSG_END) + @$(SECHO) $(MSG_END) # Display size of file. HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex #ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf -ELFSIZE = $(SIZE) $(TARGET).elf +ELFSIZE = $(SIZE) $(BUILD_DIR)/$(TARGET).elf sizebefore: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ - 2>/dev/null; echo; fi + @if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \ + 2>/dev/null; $(SECHO); fi sizeafter: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ - 2>/dev/null; echo; fi - - + @if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \ + 2>/dev/null; $(SECHO); fi + # test file sizes eventually + # @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | awk 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi # Display compiler version information. gccversion : - @$(CC) --version + @$(SILENT) || $(CC) --version # Program the device. -program: $(TARGET).hex $(TARGET).eep +program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep $(PROGRAM_CMD) -teensy: $(TARGET).hex - $(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(TARGET).hex +teensy: $(BUILD_DIR)/$(TARGET).hex + $(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex -flip: $(TARGET).hex +flip: $(BUILD_DIR)/$(TARGET).hex batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program + batchisp -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program batchisp -hardware usb -device $(MCU) -operation start reset 0 -dfu: $(TARGET).hex sizeafter +dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1))) dfu-programmer $(MCU) erase --force else dfu-programmer $(MCU) erase endif dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash $(TARGET).hex + dfu-programmer $(MCU) flash $(BUILD_DIR)/$(TARGET).hex + dfu-programmer $(MCU) reset + +dfu-no-build: +ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1))) + dfu-programmer $(MCU) erase --force +else + dfu-programmer $(MCU) erase +endif + dfu-programmer $(MCU) erase + dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex dfu-programmer $(MCU) reset dfu-start: dfu-programmer $(MCU) reset dfu-programmer $(MCU) start -flip-ee: $(TARGET).hex $(TARGET).eep - $(COPY) $(TARGET).eep $(TARGET)eep.hex +flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep + $(COPY) $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET)eep.hex batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program + batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program batchisp -hardware usb -device $(MCU) -operation start reset 0 - $(REMOVE) $(TARGET)eep.hex + $(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex -dfu-ee: $(TARGET).hex $(TARGET).eep +dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1))) - dfu-programmer $(MCU) flash --eeprom $(TARGET).eep + dfu-programmer $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep else - dfu-programmer $(MCU) flash-eeprom $(TARGET).eep + dfu-programmer $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep endif dfu-programmer $(MCU) reset @@ -475,18 +521,18 @@ gdb-config: @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @echo end >> $(GDBINIT_FILE) - @echo file $(TARGET).elf >> $(GDBINIT_FILE) + @echo file $(BUILD_DIR)/$(TARGET).elf >> $(GDBINIT_FILE) @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) ifeq ($(DEBUG_BACKEND),simulavr) @echo load >> $(GDBINIT_FILE) endif @echo break main >> $(GDBINIT_FILE) -debug: gdb-config $(TARGET).elf +debug: gdb-config $(BUILD_DIR)/$(TARGET).elf ifeq ($(DEBUG_BACKEND), avarice) @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ - $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) + $(BUILD_DIR)/$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) @$(WINSHELL) /c pause else @@ -507,124 +553,147 @@ COFFCONVERT += --change-section-address .eeprom-0x810000 -coff: $(TARGET).elf - @echo $(MSG_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-avr $< $(TARGET).cof +coff: $(BUILD_DIR)/$(TARGET).elf + @$(SECHO) $(MSG_COFF) $(BUILD_DIR)/$(TARGET).cof + $(COFFCONVERT) -O coff-avr $< $(BUILD_DIR)/$(TARGET).cof -extcoff: $(TARGET).elf - @echo $(MSG_EXTENDED_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof +extcoff: $(BUILD_DIR)/$(TARGET).elf + @$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof # Create final output files (.hex, .eep) from ELF output file. %.hex: %.elf - @echo $(MSG_FLASH) $@ - $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ + @$(SILENT) || printf "$(MSG_FLASH) $@" | $(AWK_CMD) + $(eval CMD=$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@) + @$(BUILD_CMD) + @$(COPY) $@ $(TARGET).hex + $(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/compiled.hex" | $(AWK_CMD) + $(eval CMD=$(COPY) $@ $(KEYMAP_PATH)/compiled.hex) + @$(BUILD_CMD) %.eep: %.elf - @echo $(MSG_EEPROM) $@ - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 + @$(SILENT) || printf "$(MSG_EEPROM) $@" | $(AWK_CMD) + $(eval CMD=$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0) + @$(BUILD_CMD) # Create extended listing file from ELF output file. %.lss: %.elf - @echo $(MSG_EXTENDED_LISTING) $@ - $(OBJDUMP) -h -S -z $< > $@ + @$(SILENT) || printf "$(MSG_EXTENDED_LISTING) $@" | $(AWK_CMD) + $(eval CMD=$(OBJDUMP) -h -S -z $< > $@) + @$(BUILD_CMD) # Create a symbol table from ELF output file. %.sym: %.elf - @echo $(MSG_SYMBOL_TABLE) $@ - $(NM) -n $< > $@ - - + @$(SILENT) || printf "$(MSG_SYMBOL_TABLE) $@" | $(AWK_CMD) + $(eval CMD=$(NM) -n $< > $@ ) + @$(BUILD_CMD) # Create library from object files. -.SECONDARY : $(TARGET).a +.SECONDARY : $(BUILD_DIR)/$(TARGET).a .PRECIOUS : $(OBJ) %.a: $(OBJ) - @echo $(MSG_CREATING_LIBRARY) $@ - $(AR) $@ $(OBJ) - + @$(SILENT) || printf "$(MSG_CREATING_LIBRARY) $@" | $(AWK_CMD) + $(eval CMD=$(AR) $@ $(OBJ) ) + @$(BUILD_CMD) # Link: create ELF output file from object files. -.SECONDARY : $(TARGET).elf +.SECONDARY : $(BUILD_DIR)/$(TARGET).elf .PRECIOUS : $(OBJ) %.elf: $(OBJ) - @echo $(MSG_LINKING) $@ - $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) - + @$(SILENT) || printf "$(MSG_LINKING) $@" | $(AWK_CMD) + $(eval CMD=$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)) + @$(BUILD_CMD) # Compile: create object files from C source files. $(OBJDIR)/%.o : %.c - mkdir -p $(@D) - @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ - + @mkdir -p $(@D) + @$(SILENT) || printf "$(MSG_COMPILING) $<" | $(AWK_CMD) + $(eval CMD=$(CC) -c $(ALL_CFLAGS) $< -o $@) + @$(BUILD_CMD) # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp - mkdir -p $(@D) - @echo $(MSG_COMPILING_CPP) $< + @mkdir -p $(@D) + @$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD) $(CC) -c $(ALL_CPPFLAGS) $< -o $@ - + @$(BUILD_CMD) # Compile: create assembler files from C source files. %.s : %.c - $(CC) -S $(ALL_CFLAGS) $< -o $@ - + @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD) + $(eval CMD=$(CC) -S $(ALL_CFLAGS) $< -o $@) + @$(BUILD_CMD) # Compile: create assembler files from C++ source files. %.s : %.cpp - $(CC) -S $(ALL_CPPFLAGS) $< -o $@ - + @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD) + $(eval CMD=$(CC) -S $(ALL_CPPFLAGS) $< -o $@) + @$(BUILD_CMD) # Assemble: create object files from assembler source files. $(OBJDIR)/%.o : %.S - mkdir -p $(@D) - @echo $(MSG_ASSEMBLING) $< - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - + @mkdir -p $(@D) + @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD) + $(eval CMD=$(CC) -c $(ALL_ASFLAGS) $< -o $@) + @$(BUILD_CMD) # Create preprocessed source for use in sending a bug report. %.i : %.c $(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@ - # Target: clean project. clean: begin clean_list end clean_list : - $(REMOVE) $(TARGET).hex - $(REMOVE) $(TARGET).eep - $(REMOVE) $(TARGET).cof - $(REMOVE) $(TARGET).elf - $(REMOVE) $(TARGET).map - $(REMOVE) $(TARGET).sym - $(REMOVE) $(TARGET).lss - $(REMOVE) $(OBJ) - $(REMOVE) $(LST) - $(REMOVE) $(OBJ:.o=.s) - $(REMOVE) $(OBJ:.o=.i) - $(REMOVE) -r .dep - $(REMOVE) -r $(OBJDIR) + $(REMOVE) -r $(TOP_DIR)/$(BUILD_DIR) + $(REMOVE) -r $(KEYBOARD_PATH)/$(BUILD_DIR) + $(REMOVE) -r $(KEYMAP_PATH)/$(BUILD_DIR) show_path: @echo VPATH=$(VPATH) @echo SRC=$(SRC) +SUBDIRS := $(sort $(dir $(wildcard $(TOP_DIR)/keyboard/*/.))) +all-keyboards-defaults: + @for x in $(SUBDIRS) ; do \ + printf "Compiling with default: $$x" | $(AWK_CMD); \ + LOG=$$($(MAKE) -C $$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \ + done + +KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboard/%/=/keyboard/%) +all-keyboards: $(KEYBOARDS) +/keyboard/%: + $(eval KEYBOARD=$(patsubst /keyboard/%,%,$@)) + $(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)$@/keymaps/*/.)))) + @for x in $(KEYMAPS) ; do \ + printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \ + LOG=$$($(MAKE) -C $(TOP_DIR)$@ keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \ + done + +all-keymaps: + $(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboard/$(KEYBOARD)/keymaps/*/.)))) + @for x in $(KEYMAPS) ; do \ + printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \ + LOG=$$($(MAKE) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \ + done + +# Create build directory +$(shell mkdir $(BUILD_DIR) 2>/dev/null) # Create object files directory $(shell mkdir $(OBJDIR) 2>/dev/null) # Include the dependency files. --include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) +-include $(shell mkdir $(BUILD_DIR)/.dep 2>/dev/null) $(wildcard $(BUILD_DIR)/.dep/*) # Listing of phony targets. -.PHONY : all begin finish end sizebefore sizeafter gccversion \ +.PHONY : all quick begin finish end sizebefore sizeafter gccversion \ build elf hex eep lss sym coff extcoff \ clean clean_list debug gdb-config show_path \ -program teensy dfu flip dfu-ee flip-ee dfu-start +program teensy dfu flip dfu-ee flip-ee dfu-start \ +all-keyboards-defaults all-keyboards all-keymaps |