summaryrefslogtreecommitdiff
path: root/tmk_core/protocol/vusb/usbdrv
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core/protocol/vusb/usbdrv')
-rw-r--r--tmk_core/protocol/vusb/usbdrv/oddebug.c22
-rw-r--r--tmk_core/protocol/vusb/usbdrv/oddebug.h114
-rw-r--r--tmk_core/protocol/vusb/usbdrv/usbconfig-prototype.h86
-rw-r--r--tmk_core/protocol/vusb/usbdrv/usbdrv.c673
-rw-r--r--tmk_core/protocol/vusb/usbdrv/usbdrv.h487
5 files changed, 684 insertions, 698 deletions
diff --git a/tmk_core/protocol/vusb/usbdrv/oddebug.c b/tmk_core/protocol/vusb/usbdrv/oddebug.c
index 945457c1f4..bcd28ff014 100644
--- a/tmk_core/protocol/vusb/usbdrv/oddebug.c
+++ b/tmk_core/protocol/vusb/usbdrv/oddebug.c
@@ -12,34 +12,30 @@
#if DEBUG_LEVEL > 0
-#warning "Never compile production devices with debugging enabled"
+# warning "Never compile production devices with debugging enabled"
-static void uartPutc(char c)
-{
- while(!(ODDBG_USR & (1 << ODDBG_UDRE))); /* wait for data register empty */
+static void uartPutc(char c) {
+ while (!(ODDBG_USR & (1 << ODDBG_UDRE)))
+ ; /* wait for data register empty */
ODDBG_UDR = c;
}
-static uchar hexAscii(uchar h)
-{
+static uchar hexAscii(uchar h) {
h &= 0xf;
- if(h >= 10)
- h += 'a' - (uchar)10 - '0';
+ if (h >= 10) h += 'a' - (uchar)10 - '0';
h += '0';
return h;
}
-static void printHex(uchar c)
-{
+static void printHex(uchar c) {
uartPutc(hexAscii(c >> 4));
uartPutc(hexAscii(c));
}
-void odDebug(uchar prefix, uchar *data, uchar len)
-{
+void odDebug(uchar prefix, uchar *data, uchar len) {
printHex(prefix);
uartPutc(':');
- while(len--){
+ while (len--) {
uartPutc(' ');
printHex(*data++);
}
diff --git a/tmk_core/protocol/vusb/usbdrv/oddebug.h b/tmk_core/protocol/vusb/usbdrv/oddebug.h
index d61309daac..f93f338794 100644
--- a/tmk_core/protocol/vusb/usbdrv/oddebug.h
+++ b/tmk_core/protocol/vusb/usbdrv/oddebug.h
@@ -23,39 +23,38 @@ A debug log consists of a label ('prefix') to indicate which debug log created
the output and a memory block to dump in hex ('data' and 'len').
*/
-
#ifndef F_CPU
-# define F_CPU 12000000 /* 12 MHz */
+# define F_CPU 12000000 /* 12 MHz */
#endif
/* make sure we have the UART defines: */
#include "usbportability.h"
#ifndef uchar
-# define uchar unsigned char
+# define uchar unsigned char
#endif
#if DEBUG_LEVEL > 0 && !(defined TXEN || defined TXEN0) /* no UART in device */
-# warning "Debugging disabled because device has no UART"
-# undef DEBUG_LEVEL
+# warning "Debugging disabled because device has no UART"
+# undef DEBUG_LEVEL
#endif
#ifndef DEBUG_LEVEL
-# define DEBUG_LEVEL 0
+# define DEBUG_LEVEL 0
#endif
/* ------------------------------------------------------------------------- */
#if DEBUG_LEVEL > 0
-# define DBG1(prefix, data, len) odDebug(prefix, data, len)
+# define DBG1(prefix, data, len) odDebug(prefix, data, len)
#else
-# define DBG1(prefix, data, len)
+# define DBG1(prefix, data, len)
#endif
#if DEBUG_LEVEL > 1
-# define DBG2(prefix, data, len) odDebug(prefix, data, len)
+# define DBG2(prefix, data, len) odDebug(prefix, data, len)
#else
-# define DBG2(prefix, data, len)
+# define DBG2(prefix, data, len)
#endif
/* ------------------------------------------------------------------------- */
@@ -65,57 +64,56 @@ extern void odDebug(uchar prefix, uchar *data, uchar len);
/* Try to find our control registers; ATMEL likes to rename these */
-#if defined UBRR
-# define ODDBG_UBRR UBRR
-#elif defined UBRRL
-# define ODDBG_UBRR UBRRL
-#elif defined UBRR0
-# define ODDBG_UBRR UBRR0
-#elif defined UBRR0L
-# define ODDBG_UBRR UBRR0L
-#endif
-
-#if defined UCR
-# define ODDBG_UCR UCR
-#elif defined UCSRB
-# define ODDBG_UCR UCSRB
-#elif defined UCSR0B
-# define ODDBG_UCR UCSR0B
-#endif
-
-#if defined TXEN
-# define ODDBG_TXEN TXEN
-#else
-# define ODDBG_TXEN TXEN0
-#endif
-
-#if defined USR
-# define ODDBG_USR USR
-#elif defined UCSRA
-# define ODDBG_USR UCSRA
-#elif defined UCSR0A
-# define ODDBG_USR UCSR0A
-#endif
-
-#if defined UDRE
-# define ODDBG_UDRE UDRE
-#else
-# define ODDBG_UDRE UDRE0
-#endif
-
-#if defined UDR
-# define ODDBG_UDR UDR
-#elif defined UDR0
-# define ODDBG_UDR UDR0
-#endif
-
-static inline void odDebugInit(void)
-{
- ODDBG_UCR |= (1<<ODDBG_TXEN);
+# if defined UBRR
+# define ODDBG_UBRR UBRR
+# elif defined UBRRL
+# define ODDBG_UBRR UBRRL
+# elif defined UBRR0
+# define ODDBG_UBRR UBRR0
+# elif defined UBRR0L
+# define ODDBG_UBRR UBRR0L
+# endif
+
+# if defined UCR
+# define ODDBG_UCR UCR
+# elif defined UCSRB
+# define ODDBG_UCR UCSRB
+# elif defined UCSR0B
+# define ODDBG_UCR UCSR0B
+# endif
+
+# if defined TXEN
+# define ODDBG_TXEN TXEN
+# else
+# define ODDBG_TXEN TXEN0
+# endif
+
+# if defined USR
+# define ODDBG_USR USR
+# elif defined UCSRA
+# define ODDBG_USR UCSRA
+# elif defined UCSR0A
+# define ODDBG_USR UCSR0A
+# endif
+
+# if defined UDRE
+# define ODDBG_UDRE UDRE
+# else
+# define ODDBG_UDRE UDRE0
+# endif
+
+# if defined UDR
+# define ODDBG_UDR UDR
+# elif defined UDR0
+# define ODDBG_UDR UDR0
+# endif
+
+static inline void odDebugInit(void) {
+ ODDBG_UCR |= (1 << ODDBG_TXEN);
ODDBG_UBRR = F_CPU / (19200 * 16L) - 1;
}
#else
-# define odDebugInit()
+# define odDebugInit()
#endif
/* ------------------------------------------------------------------------- */
diff --git a/tmk_core/protocol/vusb/usbdrv/usbconfig-prototype.h b/tmk_core/protocol/vusb/usbdrv/usbconfig-prototype.h
index 847710e2a0..020ea51474 100644
--- a/tmk_core/protocol/vusb/usbdrv/usbconfig-prototype.h
+++ b/tmk_core/protocol/vusb/usbdrv/usbconfig-prototype.h
@@ -26,15 +26,15 @@ section at the end of this file).
/* ---------------------------- Hardware Config ---------------------------- */
-#define USB_CFG_IOPORTNAME D
+#define USB_CFG_IOPORTNAME D
/* This is the port where the USB bus is connected. When you configure it to
* "B", the registers PORTB, PINB and DDRB will be used.
*/
-#define USB_CFG_DMINUS_BIT 4
+#define USB_CFG_DMINUS_BIT 4
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
* This may be any bit in the port.
*/
-#define USB_CFG_DPLUS_BIT 2
+#define USB_CFG_DPLUS_BIT 2
/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
* This may be any bit in the port. Please note that D+ must also be connected
* to interrupt pin INT0! [You can also use other interrupts, see section
@@ -43,7 +43,7 @@ section at the end of this file).
* interrupt, the USB interrupt will also be triggered at Start-Of-Frame
* markers every millisecond.]
*/
-#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
+#define USB_CFG_CLOCK_KHZ (F_CPU / 1000)
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
* 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
* require no crystal, they tolerate +/- 1% deviation from the nominal
@@ -52,7 +52,7 @@ section at the end of this file).
* Since F_CPU should be defined to your actual clock rate anyway, you should
* not need to modify this setting.
*/
-#define USB_CFG_CHECK_CRC 0
+#define USB_CFG_CHECK_CRC 0
/* Define this to 1 if you want that the driver checks integrity of incoming
* data packets (CRC checks). CRC checks cost quite a bit of code size and are
* currently only available for 18 MHz crystal clock. You must choose
@@ -75,18 +75,18 @@ section at the end of this file).
/* --------------------------- Functional Range ---------------------------- */
-#define USB_CFG_HAVE_INTRIN_ENDPOINT 0
+#define USB_CFG_HAVE_INTRIN_ENDPOINT 0
/* Define this to 1 if you want to compile a version with two endpoints: The
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint
* number).
*/
-#define USB_CFG_HAVE_INTRIN_ENDPOINT3 0
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3 0
/* Define this to 1 if you want to compile a version with three endpoints: The
* default control endpoint 0, an interrupt-in endpoint 3 (or the number
* configured below) and a catch-all default interrupt-in endpoint as above.
* You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
*/
-#define USB_CFG_EP3_NUMBER 3
+#define USB_CFG_EP3_NUMBER 3
/* If the so-called endpoint 3 is used, it can now be configured to any other
* endpoint number (except 0) with this macro. Default if undefined is 3.
*/
@@ -96,13 +96,13 @@ section at the end of this file).
* Since the token is toggled BEFORE sending any data, the first packet is
* sent with the oposite value of this configuration!
*/
-#define USB_CFG_IMPLEMENT_HALT 0
+#define USB_CFG_IMPLEMENT_HALT 0
/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
* for endpoint 1 (interrupt endpoint). Although you may not need this feature,
* it is required by the standard. We have made it a config option because it
* bloats the code considerably.
*/
-#define USB_CFG_SUPPRESS_INTR_CODE 0
+#define USB_CFG_SUPPRESS_INTR_CODE 0
/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
* want to send any data over them. If this macro is defined to 1, functions
* usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
@@ -110,48 +110,48 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM.
*/
-#define USB_CFG_INTR_POLL_INTERVAL 10
+#define USB_CFG_INTR_POLL_INTERVAL 10
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
-#define USB_CFG_IS_SELF_POWERED 0
+#define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus.
*/
-#define USB_CFG_MAX_BUS_POWER 100
+#define USB_CFG_MAX_BUS_POWER 100
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
-#define USB_CFG_IMPLEMENT_FN_WRITE 0
+#define USB_CFG_IMPLEMENT_FN_WRITE 0
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of
* bytes.
*/
-#define USB_CFG_IMPLEMENT_FN_READ 0
+#define USB_CFG_IMPLEMENT_FN_READ 0
/* Set this to 1 if you need to send control replies which are generated
* "on the fly" when usbFunctionRead() is called. If you only want to send
* data from a static buffer, set it to 0 and return the data from
* usbFunctionSetup(). This saves a couple of bytes.
*/
-#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
* You must implement the function usbFunctionWriteOut() which receives all
* interrupt/bulk data sent to any endpoint other than 0. The endpoint number
* can be found in 'usbRxToken'.
*/
-#define USB_CFG_HAVE_FLOWCONTROL 0
+#define USB_CFG_HAVE_FLOWCONTROL 0
/* Define this to 1 if you want flowcontrol over USB data. See the definition
* of the macros usbDisableAllRequests() and usbEnableAllRequests() in
* usbdrv.h.
*/
-#define USB_CFG_DRIVER_FLASH_PAGE 0
+#define USB_CFG_DRIVER_FLASH_PAGE 0
/* If the device has more than 64 kBytes of flash, define this to the 64 k page
* where the driver's constants (descriptors) are located. Or in other words:
* Define this to 1 for boot loaders on the ATMega128.
*/
-#define USB_CFG_LONG_TRANSFERS 0
+#define USB_CFG_LONG_TRANSFERS 0
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
* in a single control-in or control-out transfer. Note that the capability
* for long transfers increases the driver size.
@@ -172,7 +172,7 @@ section at the end of this file).
/* This macro (if defined) is executed when a USB SET_ADDRESS request was
* received.
*/
-#define USB_COUNT_SOF 0
+#define USB_COUNT_SOF 0
/* define this macro to 1 if you need the global variable "usbSofCount" which
* counts SOF packets. This feature requires that the hardware interrupt is
* connected to D- instead of D+.
@@ -196,7 +196,7 @@ section at the end of this file).
* Please note that Start Of Frame detection works only if D- is wired to the
* interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
*/
-#define USB_CFG_CHECK_DATA_TOGGLING 0
+#define USB_CFG_CHECK_DATA_TOGGLING 0
/* define this macro to 1 if you want to filter out duplicate data packets
* sent by the host. Duplicates occur only as a consequence of communication
* errors, when the host does not receive an ACK. Please note that you need to
@@ -204,11 +204,11 @@ section at the end of this file).
* usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
* for each control- and out-endpoint to check for duplicate packets.
*/
-#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
/* define this macro to 1 if you want the function usbMeasureFrameLength()
* compiled in. This function can be used to calibrate the AVR's RC oscillator.
*/
-#define USB_USE_FAST_CRC 0
+#define USB_USE_FAST_CRC 0
/* The assembler module has two implementations for the CRC algorithm. One is
* faster, the other is smaller. This CRC routine is only used for transmitted
* messages where timing is not critical. The faster routine needs 31 cycles
@@ -219,7 +219,7 @@ section at the end of this file).
/* -------------------------- Device Description --------------------------- */
-#define USB_CFG_VENDOR_ID 0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */
+#define USB_CFG_VENDOR_ID 0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */
/* USB vendor ID for the device, low byte first. If you have registered your
* own Vendor ID, define it here. Otherwise you may use one of obdev's free
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
@@ -228,7 +228,7 @@ section at the end of this file).
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
* the implications!
*/
-#define USB_CFG_DEVICE_ID 0xdc, 0x05 /* = 0x05dc = 1500 */
+#define USB_CFG_DEVICE_ID 0xdc, 0x05 /* = 0x05dc = 1500 */
/* This is the ID of the product, low byte first. It is interpreted in the
* scope of the vendor ID. If you have registered your own VID with usb.org
* or if you have licensed a PID from somebody else, define it here. Otherwise
@@ -239,10 +239,10 @@ section at the end of this file).
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
* the implications!
*/
-#define USB_CFG_DEVICE_VERSION 0x00, 0x01
+#define USB_CFG_DEVICE_VERSION 0x00, 0x01
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'o', 'b', 'd', 'e', 'v', '.', 'a', 't'
+#define USB_CFG_VENDOR_NAME 'o', 'b', 'd', 'e', 'v', '.', 'a', 't'
#define USB_CFG_VENDOR_NAME_LEN 8
/* These two values define the vendor name returned by the USB device. The name
* must be given as a list of characters under single quotes. The characters
@@ -252,7 +252,7 @@ section at the end of this file).
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
* details.
*/
-#define USB_CFG_DEVICE_NAME 'T', 'e', 'm', 'p', 'l', 'a', 't', 'e'
+#define USB_CFG_DEVICE_NAME 'T', 'e', 'm', 'p', 'l', 'a', 't', 'e'
#define USB_CFG_DEVICE_NAME_LEN 8
/* Same as above for the device name. If you don't want a device name, undefine
* the macros. See the file USB-IDs-for-free.txt before you assign a name if
@@ -267,14 +267,14 @@ section at the end of this file).
* to fine tune control over USB descriptors such as the string descriptor
* for the serial number.
*/
-#define USB_CFG_DEVICE_CLASS 0xff /* set to 0 if deferred to interface */
-#define USB_CFG_DEVICE_SUBCLASS 0
+#define USB_CFG_DEVICE_CLASS 0xff /* set to 0 if deferred to interface */
+#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
* Class 0xff is "vendor specific".
*/
-#define USB_CFG_INTERFACE_CLASS 0 /* define class here if not at device level */
-#define USB_CFG_INTERFACE_SUBCLASS 0
-#define USB_CFG_INTERFACE_PROTOCOL 0
+#define USB_CFG_INTERFACE_CLASS 0 /* define class here if not at device level */
+#define USB_CFG_INTERFACE_SUBCLASS 0
+#define USB_CFG_INTERFACE_PROTOCOL 0
/* See USB specification if you want to conform to an existing device class or
* protocol. The following classes must be set at interface level:
* HID class is 3, no subclass and protocol required (but may be useful!)
@@ -345,16 +345,16 @@ section at the end of this file).
* };
*/
-#define USB_CFG_DESCR_PROPS_DEVICE 0
-#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
-#define USB_CFG_DESCR_PROPS_HID 0
-#define USB_CFG_DESCR_PROPS_HID_REPORT 0
-#define USB_CFG_DESCR_PROPS_UNKNOWN 0
+#define USB_CFG_DESCR_PROPS_DEVICE 0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
+#define USB_CFG_DESCR_PROPS_STRINGS 0
+#define USB_CFG_DESCR_PROPS_STRING_0 0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_HID 0
+#define USB_CFG_DESCR_PROPS_HID_REPORT 0
+#define USB_CFG_DESCR_PROPS_UNKNOWN 0
/* ----------------------- Optional MCU Description ------------------------ */
diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrv.c b/tmk_core/protocol/vusb/usbdrv/usbdrv.c
index 30cdc9dcfc..f69198b1b9 100644
--- a/tmk_core/protocol/vusb/usbdrv/usbdrv.c
+++ b/tmk_core/protocol/vusb/usbdrv/usbdrv.c
@@ -21,36 +21,36 @@ documentation of the entire driver.
/* ------------------------------------------------------------------------- */
/* raw USB registers / interface to assembler code: */
-uchar usbRxBuf[2*USB_BUFSIZE]; /* raw RX buffer: PID, 8 bytes data, 2 bytes CRC */
-uchar usbInputBufOffset; /* offset in usbRxBuf used for low level receiving */
-uchar usbDeviceAddr; /* assigned during enumeration, defaults to 0 */
-uchar usbNewDeviceAddr; /* device ID which should be set after status phase */
-uchar usbConfiguration; /* currently selected configuration. Administered by driver, but not used */
-volatile schar usbRxLen; /* = 0; number of bytes in usbRxBuf; 0 means free, -1 for flow control */
-uchar usbCurrentTok; /* last token received or endpoint number for last OUT token if != 0 */
-uchar usbRxToken; /* token for data we received; or endpont number for last OUT */
-volatile uchar usbTxLen = USBPID_NAK; /* number of bytes to transmit with next IN token or handshake token */
-uchar usbTxBuf[USB_BUFSIZE];/* data to transmit with next IN, free if usbTxLen contains handshake token */
+uchar usbRxBuf[2 * USB_BUFSIZE]; /* raw RX buffer: PID, 8 bytes data, 2 bytes CRC */
+uchar usbInputBufOffset; /* offset in usbRxBuf used for low level receiving */
+uchar usbDeviceAddr; /* assigned during enumeration, defaults to 0 */
+uchar usbNewDeviceAddr; /* device ID which should be set after status phase */
+uchar usbConfiguration; /* currently selected configuration. Administered by driver, but not used */
+volatile schar usbRxLen; /* = 0; number of bytes in usbRxBuf; 0 means free, -1 for flow control */
+uchar usbCurrentTok; /* last token received or endpoint number for last OUT token if != 0 */
+uchar usbRxToken; /* token for data we received; or endpont number for last OUT */
+volatile uchar usbTxLen = USBPID_NAK; /* number of bytes to transmit with next IN token or handshake token */
+uchar usbTxBuf[USB_BUFSIZE]; /* data to transmit with next IN, free if usbTxLen contains handshake token */
#if USB_COUNT_SOF
-volatile uchar usbSofCount; /* incremented by assembler module every SOF */
+volatile uchar usbSofCount; /* incremented by assembler module every SOF */
#endif
#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE
-usbTxStatus_t usbTxStatus1;
-# if USB_CFG_HAVE_INTRIN_ENDPOINT3
-usbTxStatus_t usbTxStatus3;
-# endif
+usbTxStatus_t usbTxStatus1;
+# if USB_CFG_HAVE_INTRIN_ENDPOINT3
+usbTxStatus_t usbTxStatus3;
+# endif
#endif
#if USB_CFG_CHECK_DATA_TOGGLING
-uchar usbCurrentDataToken;/* when we check data toggling to ignore duplicate packets */
+uchar usbCurrentDataToken; /* when we check data toggling to ignore duplicate packets */
#endif
/* USB status registers / not shared with asm code */
-uchar *usbMsgPtr; /* data to transmit next -- ROM or RAM address */
-static usbMsgLen_t usbMsgLen = USB_NO_MSG; /* remaining number of bytes */
-static uchar usbMsgFlags; /* flag values see below */
+uchar * usbMsgPtr; /* data to transmit next -- ROM or RAM address */
+static usbMsgLen_t usbMsgLen = USB_NO_MSG; /* remaining number of bytes */
+static uchar usbMsgFlags; /* flag values see below */
-#define USB_FLG_MSGPTR_IS_ROM (1<<6)
-#define USB_FLG_USE_USER_RW (1<<7)
+#define USB_FLG_MSGPTR_IS_ROM (1 << 6)
+#define USB_FLG_USE_USER_RW (1 << 7)
/*
optimizing hints:
@@ -64,196 +64,174 @@ optimizing hints:
#if USB_CFG_DESCR_PROPS_STRINGS == 0
-#if USB_CFG_DESCR_PROPS_STRING_0 == 0
-#undef USB_CFG_DESCR_PROPS_STRING_0
-#define USB_CFG_DESCR_PROPS_STRING_0 sizeof(usbDescriptorString0)
-const PROGMEM char usbDescriptorString0[] = { /* language descriptor */
+# if USB_CFG_DESCR_PROPS_STRING_0 == 0
+# undef USB_CFG_DESCR_PROPS_STRING_0
+# define USB_CFG_DESCR_PROPS_STRING_0 sizeof(usbDescriptorString0)
+const PROGMEM char usbDescriptorString0[] = {
+ /* language descriptor */
4, /* sizeof(usbDescriptorString0): length of descriptor in bytes */
3, /* descriptor type */
0x09, 0x04, /* language index (0x0409 = US-English) */
};
-#endif
+# endif
-#if USB_CFG_DESCR_PROPS_STRING_VENDOR == 0 && USB_CFG_VENDOR_NAME_LEN
-#undef USB_CFG_DESCR_PROPS_STRING_VENDOR
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR sizeof(usbDescriptorStringVendor)
-const PROGMEM int usbDescriptorStringVendor[] = {
- USB_STRING_DESCRIPTOR_HEADER(USB_CFG_VENDOR_NAME_LEN),
- USB_CFG_VENDOR_NAME
-};
-#endif
+# if USB_CFG_DESCR_PROPS_STRING_VENDOR == 0 && USB_CFG_VENDOR_NAME_LEN
+# undef USB_CFG_DESCR_PROPS_STRING_VENDOR
+# define USB_CFG_DESCR_PROPS_STRING_VENDOR sizeof(usbDescriptorStringVendor)
+const PROGMEM int usbDescriptorStringVendor[] = {USB_STRING_DESCRIPTOR_HEADER(USB_CFG_VENDOR_NAME_LEN), USB_CFG_VENDOR_NAME};
+# endif
-#if USB_CFG_DESCR_PROPS_STRING_PRODUCT == 0 && USB_CFG_DEVICE_NAME_LEN
-#undef USB_CFG_DESCR_PROPS_STRING_PRODUCT
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT sizeof(usbDescriptorStringDevice)
-const PROGMEM int usbDescriptorStringDevice[] = {
- USB_STRING_DESCRIPTOR_HEADER(USB_CFG_DEVICE_NAME_LEN),
- USB_CFG_DEVICE_NAME
-};
-#endif
+# if USB_CFG_DESCR_PROPS_STRING_PRODUCT == 0 && USB_CFG_DEVICE_NAME_LEN
+# undef USB_CFG_DESCR_PROPS_STRING_PRODUCT
+# define USB_CFG_DESCR_PROPS_STRING_PRODUCT sizeof(usbDescriptorStringDevice)
+const PROGMEM int usbDescriptorStringDevice[] = {USB_STRING_DESCRIPTOR_HEADER(USB_CFG_DEVICE_NAME_LEN), USB_CFG_DEVICE_NAME};
+# endif
-#if USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER == 0 && USB_CFG_SERIAL_NUMBER_LEN
-#undef USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER sizeof(usbDescriptorStringSerialNumber)
-const PROGMEM int usbDescriptorStringSerialNumber[] = {
- USB_STRING_DESCRIPTOR_HEADER(USB_CFG_SERIAL_NUMBER_LEN),
- USB_CFG_SERIAL_NUMBER
-};
-#endif
+# if USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER == 0 && USB_CFG_SERIAL_NUMBER_LEN
+# undef USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+# define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER sizeof(usbDescriptorStringSerialNumber)
+const PROGMEM int usbDescriptorStringSerialNumber[] = {USB_STRING_DESCRIPTOR_HEADER(USB_CFG_SERIAL_NUMBER_LEN), USB_CFG_SERIAL_NUMBER};
+# endif
-#endif /* USB_CFG_DESCR_PROPS_STRINGS == 0 */
+#endif /* USB_CFG_DESCR_PROPS_STRINGS == 0 */
/* --------------------------- Device Descriptor --------------------------- */
#if USB_CFG_DESCR_PROPS_DEVICE == 0
-#undef USB_CFG_DESCR_PROPS_DEVICE
-#define USB_CFG_DESCR_PROPS_DEVICE sizeof(usbDescriptorDevice)
-const PROGMEM char usbDescriptorDevice[] = { /* USB device descriptor */
- 18, /* sizeof(usbDescriptorDevice): length of descriptor in bytes */
- USBDESCR_DEVICE, /* descriptor type */
- 0x10, 0x01, /* USB version supported */
- USB_CFG_DEVICE_CLASS,
- USB_CFG_DEVICE_SUBCLASS,
- 0, /* protocol */
- 8, /* max packet size */
+# undef USB_CFG_DESCR_PROPS_DEVICE
+# define USB_CFG_DESCR_PROPS_DEVICE sizeof(usbDescriptorDevice)
+const PROGMEM char usbDescriptorDevice[] = {
+ /* USB device descriptor */
+ 18, /* sizeof(usbDescriptorDevice): length of descriptor in bytes */
+ USBDESCR_DEVICE, /* descriptor type */
+ 0x10, 0x01, /* USB version supported */
+ USB_CFG_DEVICE_CLASS, USB_CFG_DEVICE_SUBCLASS, 0, /* protocol */
+ 8, /* max packet size */
/* the following two casts affect the first byte of the constant only, but
* that's sufficient to avoid a warning with the default values.
*/
- (char)USB_CFG_VENDOR_ID,/* 2 bytes */
- (char)USB_CFG_DEVICE_ID,/* 2 bytes */
- USB_CFG_DEVICE_VERSION, /* 2 bytes */
- USB_CFG_DESCR_PROPS_STRING_VENDOR != 0 ? 1 : 0, /* manufacturer string index */
- USB_CFG_DESCR_PROPS_STRING_PRODUCT != 0 ? 2 : 0, /* product string index */
- USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER != 0 ? 3 : 0, /* serial number string index */
- 1, /* number of configurations */
+ (char)USB_CFG_VENDOR_ID, /* 2 bytes */
+ (char)USB_CFG_DEVICE_ID, /* 2 bytes */
+ USB_CFG_DEVICE_VERSION, /* 2 bytes */
+ USB_CFG_DESCR_PROPS_STRING_VENDOR != 0 ? 1 : 0, /* manufacturer string index */
+ USB_CFG_DESCR_PROPS_STRING_PRODUCT != 0 ? 2 : 0, /* product string index */
+ USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER != 0 ? 3 : 0, /* serial number string index */
+ 1, /* number of configurations */
};
#endif
/* ----------------------- Configuration Descriptor ------------------------ */
#if USB_CFG_DESCR_PROPS_HID_REPORT != 0 && USB_CFG_DESCR_PROPS_HID == 0
-#undef USB_CFG_DESCR_PROPS_HID
-#define USB_CFG_DESCR_PROPS_HID 9 /* length of HID descriptor in config descriptor below */
+# undef USB_CFG_DESCR_PROPS_HID
+# define USB_CFG_DESCR_PROPS_HID 9 /* length of HID descriptor in config descriptor below */
#endif
#if USB_CFG_DESCR_PROPS_CONFIGURATION == 0
-#undef USB_CFG_DESCR_PROPS_CONFIGURATION
-#define USB_CFG_DESCR_PROPS_CONFIGURATION sizeof(usbDescriptorConfiguration)
-PROGMEM char usbDescriptorConfiguration[] = { /* USB configuration descriptor */
- 9, /* sizeof(usbDescriptorConfiguration): length of descriptor in bytes */
- USBDESCR_CONFIG, /* descriptor type */
- 18 + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT3 +
- (USB_CFG_DESCR_PROPS_HID & 0xff), 0,
- /* total length of data returned (including inlined descriptors) */
- 1, /* number of interfaces in this configuration */
- 1, /* index of this configuration */
- 0, /* configuration name string index */
-#if USB_CFG_IS_SELF_POWERED
- (1 << 7) | USBATTR_SELFPOWER, /* attributes */
-#else
- (1 << 7), /* attributes */
-#endif
- USB_CFG_MAX_BUS_POWER/2, /* max USB current in 2mA units */
-/* interface descriptor follows inline: */
- 9, /* sizeof(usbDescrInterface): length of descriptor in bytes */
- USBDESCR_INTERFACE, /* descriptor type */
- 0, /* index of this interface */
- 0, /* alternate setting for this interface */
- USB_CFG_HAVE_INTRIN_ENDPOINT + USB_CFG_HAVE_INTRIN_ENDPOINT3, /* endpoints excl 0: number of endpoint descriptors to follow */
- USB_CFG_INTERFACE_CLASS,
- USB_CFG_INTERFACE_SUBCLASS,
- USB_CFG_INTERFACE_PROTOCOL,
- 0, /* string index for interface */
-#if (USB_CFG_DESCR_PROPS_HID & 0xff) /* HID descriptor */
- 9, /* sizeof(usbDescrHID): length of descriptor in bytes */
- USBDESCR_HID, /* descriptor type: HID */
- 0x01, 0x01, /* BCD representation of HID version */
- 0x00, /* target country code */
- 0x01, /* number of HID Report (or other HID class) Descriptor infos to follow */
- 0x22, /* descriptor type: report */
- USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH, 0, /* total length of report descriptor */
-#endif
-#if USB_CFG_HAVE_INTRIN_ENDPOINT /* endpoint descriptor for endpoint 1 */
- 7, /* sizeof(usbDescrEndpoint) */
- USBDESCR_ENDPOINT, /* descriptor type = endpoint */
- (char)0x81, /* IN endpoint number 1 */
- 0x03, /* attrib: Interrupt endpoint */
- 8, 0, /* maximum packet size */
- USB_CFG_INTR_POLL_INTERVAL, /* in ms */
-#endif
-#if USB_CFG_HAVE_INTRIN_ENDPOINT3 /* endpoint descriptor for endpoint 3 */
- 7, /* sizeof(usbDescrEndpoint) */
- USBDESCR_ENDPOINT, /* descriptor type = endpoint */
+# undef USB_CFG_DESCR_PROPS_CONFIGURATION
+# define USB_CFG_DESCR_PROPS_CONFIGURATION sizeof(usbDescriptorConfiguration)
+PROGMEM char usbDescriptorConfiguration[] = {
+ /* USB configuration descriptor */
+ 9, /* sizeof(usbDescriptorConfiguration): length of descriptor in bytes */
+ USBDESCR_CONFIG, /* descriptor type */
+ 18 + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT3 + (USB_CFG_DESCR_PROPS_HID & 0xff), 0,
+ /* total length of data returned (including inlined descriptors) */
+ 1, /* number of interfaces in this configuration */
+ 1, /* index of this configuration */
+ 0, /* configuration name string index */
+# if USB_CFG_IS_SELF_POWERED
+ (1 << 7) | USBATTR_SELFPOWER, /* attributes */
+# else
+ (1 << 7), /* attributes */
+# endif
+ USB_CFG_MAX_BUS_POWER / 2, /* max USB current in 2mA units */
+ /* interface descriptor follows inline: */
+ 9, /* sizeof(usbDescrInterface): length of descriptor in bytes */
+ USBDESCR_INTERFACE, /* descriptor type */
+ 0, /* index of this interface */
+ 0, /* alternate setting for this interface */
+ USB_CFG_HAVE_INTRIN_ENDPOINT + USB_CFG_HAVE_INTRIN_ENDPOINT3, /* endpoints excl 0: number of endpoint descriptors to follow */
+ USB_CFG_INTERFACE_CLASS, USB_CFG_INTERFACE_SUBCLASS, USB_CFG_INTERFACE_PROTOCOL, 0, /* string index for interface */
+# if (USB_CFG_DESCR_PROPS_HID & 0xff) /* HID descriptor */
+ 9, /* sizeof(usbDescrHID): length of descriptor in bytes */
+ USBDESCR_HID, /* descriptor type: HID */
+ 0x01, 0x01, /* BCD representation of HID version */
+ 0x00, /* target country code */
+ 0x01, /* number of HID Report (or other HID class) Descriptor infos to follow */
+ 0x22, /* descriptor type: report */
+ USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH, 0, /* total length of report descriptor */
+# endif
+# if USB_CFG_HAVE_INTRIN_ENDPOINT /* endpoint descriptor for endpoint 1 */
+ 7, /* sizeof(usbDescrEndpoint) */
+ USBDESCR_ENDPOINT, /* descriptor type = endpoint */
+ (char)0x81, /* IN endpoint number 1 */
+ 0x03, /* attrib: Interrupt endpoint */
+ 8, 0, /* maximum packet size */
+ USB_CFG_INTR_POLL_INTERVAL, /* in ms */
+# endif
+# if USB_CFG_HAVE_INTRIN_ENDPOINT3 /* endpoint descriptor for endpoint 3 */
+ 7, /* sizeof(usbDescrEndpoint) */
+ USBDESCR_ENDPOINT, /* descriptor type = endpoint */
(char)(0x80 | USB_CFG_EP3_NUMBER), /* IN endpoint number 3 */
- 0x03, /* attrib: Interrupt endpoint */
- 8, 0, /* maximum packet size */
- USB_CFG_INTR_POLL_INTERVAL, /* in ms */
-#endif
+ 0x03, /* attrib: Interrupt endpoint */
+ 8, 0, /* maximum packet size */
+ USB_CFG_INTR_POLL_INTERVAL, /* in ms */
+# endif
};
#endif
/* ------------------------------------------------------------------------- */
-static inline void usbResetDataToggling(void)
-{
+static inline void usbResetDataToggling(void) {
#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE
- USB_SET_DATATOKEN1(USB_INITIAL_DATATOKEN); /* reset data toggling for interrupt endpoint */
-# if USB_CFG_HAVE_INTRIN_ENDPOINT3
- USB_SET_DATATOKEN3(USB_INITIAL_DATATOKEN); /* reset data toggling for interrupt endpoint */
-# endif
+ USB_SET_DATATOKEN1(USB_INITIAL_DATATOKEN); /* reset data toggling for interrupt endpoint */
+# if USB_CFG_HAVE_INTRIN_ENDPOINT3
+ USB_SET_DATATOKEN3(USB_INITIAL_DATATOKEN); /* reset data toggling for interrupt endpoint */
+# endif
#endif
}
-static inline void usbResetStall(void)
-{
+static inline void usbResetStall(void) {
#if USB_CFG_IMPLEMENT_HALT && USB_CFG_HAVE_INTRIN_ENDPOINT
- usbTxLen1 = USBPID_NAK;
-#if USB_CFG_HAVE_INTRIN_ENDPOINT3
- usbTxLen3 = USBPID_NAK;
-#endif
+ usbTxLen1 = USBPID_NAK;
+# if USB_CFG_HAVE_INTRIN_ENDPOINT3
+ usbTxLen3 = USBPID_NAK;
+# endif
#endif
}
/* ------------------------------------------------------------------------- */
#if !USB_CFG_SUPPRESS_INTR_CODE
-#if USB_CFG_HAVE_INTRIN_ENDPOINT
-static void usbGenericSetInterrupt(uchar *data, uchar len, usbTxStatus_t *txStatus)
-{
-uchar *p;
-char i;
-
-#if USB_CFG_IMPLEMENT_HALT
- if(usbTxLen1 == USBPID_STALL)
- return;
-#endif
- if(txStatus->len & 0x10){ /* packet buffer was empty */
+# if USB_CFG_HAVE_INTRIN_ENDPOINT
+static void usbGenericSetInterrupt(uchar *data, uchar len, usbTxStatus_t *txStatus) {
+ uchar *p;
+ char i;
+
+# if USB_CFG_IMPLEMENT_HALT
+ if (usbTxLen1 == USBPID_STALL) return;
+# endif
+ if (txStatus->len & 0x10) { /* packet buffer was empty */
txStatus->buffer[0] ^= USBPID_DATA0 ^ USBPID_DATA1; /* toggle token */
- }else{
+ } else {
txStatus->len = USBPID_NAK; /* avoid sending outdated (overwritten) interrupt data */
}
p = txStatus->buffer + 1;
i = len;
- do{ /* if len == 0, we still copy 1 byte, but that's no problem */
+ do { /* if len == 0, we still copy 1 byte, but that's no problem */
*p++ = *data++;
- }while(--i > 0); /* loop control at the end is 2 bytes shorter than at beginning */
+ } while (--i > 0); /* loop control at the end is 2 bytes shorter than at beginning */
usbCrc16Append(&txStatus->buffer[1], len);
- txStatus->len = len + 4; /* len must be given including sync byte */
+ txStatus->len = len + 4; /* len must be given including sync byte */
DBG2(0x21 + (((int)txStatus >> 3) & 3), txStatus->buffer, len + 3);
}
-USB_PUBLIC void usbSetInterrupt(uchar *data, uchar len)
-{
- usbGenericSetInterrupt(data, len, &usbTxStatus1);
-}
-#endif
+USB_PUBLIC void usbSetInterrupt(uchar *data, uchar len) { usbGenericSetInterrupt(data, len, &usbTxStatus1); }
+# endif
-#if USB_CFG_HAVE_INTRIN_ENDPOINT3
-USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len)
-{
- usbGenericSetInterrupt(data, len, &usbTxStatus3);
-}
-#endif
+# if USB_CFG_HAVE_INTRIN_ENDPOINT3
+USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len) { usbGenericSetInterrupt(data, len, &usbTxStatus3); }
+# endif
#endif /* USB_CFG_SUPPRESS_INTR_CODE */
/* ------------------ utilities for code following below ------------------- */
@@ -264,26 +242,58 @@ USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len)
* cases.
*/
#if USB_CFG_USE_SWITCH_STATEMENT
-# define SWITCH_START(cmd) switch(cmd){{
-# define SWITCH_CASE(value) }break; case (value):{
-# define SWITCH_CASE2(v1,v2) }break; case (v1): case(v2):{
-# define SWITCH_CASE3(v1,v2,v3) }break; case (v1): case(v2): case(v3):{
-# define SWITCH_DEFAULT }break; default:{
-# define SWITCH_END }}
+# define SWITCH_START(cmd) \
+ switch (cmd) { \
+ {
+# define SWITCH_CASE(value) \
+ } \
+ break; \
+ case (value): {
+# define SWITCH_CASE2(v1, v2) \
+ } \
+ break; \
+ case (v1): \
+ case (v2): {
+# define SWITCH_CASE3(v1, v2, v3) \
+ } \
+ break; \
+ case (v1): \
+ case (v2): \
+ case (v3): {
+# define SWITCH_DEFAULT \
+ } \
+ break; \
+ default: {
+# define SWITCH_END \
+ } \
+ }
#else
-# define SWITCH_START(cmd) {uchar _cmd = cmd; if(0){
-# define SWITCH_CASE(value) }else if(_cmd == (value)){
-# define SWITCH_CASE2(v1,v2) }else if(_cmd == (v1) || _cmd == (v2)){
-# define SWITCH_CASE3(v1,v2,v3) }else if(_cmd == (v1) || _cmd == (v2) || (_cmd == v3)){
-# define SWITCH_DEFAULT }else{
-# define SWITCH_END }}
+# define SWITCH_START(cmd) \
+ { \
+ uchar _cmd = cmd; \
+ if (0) {
+# define SWITCH_CASE(value) \
+ } \
+ else if (_cmd == (value)) {
+# define SWITCH_CASE2(v1, v2) \
+ } \
+ else if (_cmd == (v1) || _cmd == (v2)) {
+# define SWITCH_CASE3(v1, v2, v3) \
+ } \
+ else if (_cmd == (v1) || _cmd == (v2) || (_cmd == v3)) {
+# define SWITCH_DEFAULT \
+ } \
+ else {
+# define SWITCH_END \
+ } \
+ }
#endif
#ifndef USB_RX_USER_HOOK
-#define USB_RX_USER_HOOK(data, len)
+# define USB_RX_USER_HOOK(data, len)
#endif
#ifndef USB_SET_ADDRESS_HOOK
-#define USB_SET_ADDRESS_HOOK()
+# define USB_SET_ADDRESS_HOOK()
#endif
/* ------------------------------------------------------------------------- */
@@ -293,62 +303,59 @@ USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len)
* This may cause problems with undefined symbols if compiled without
* optimizing!
*/
-#define GET_DESCRIPTOR(cfgProp, staticName) \
- if(cfgProp){ \
- if((cfgProp) & USB_PROP_IS_RAM) \
- flags = 0; \
- if((cfgProp) & USB_PROP_IS_DYNAMIC){ \
- len = usbFunctionDescriptor(rq); \
- }else{ \
- len = USB_PROP_LENGTH(cfgProp); \
- usbMsgPtr = (uchar *)(staticName); \
- } \
+#define GET_DESCRIPTOR(cfgProp, staticName) \
+ if (cfgProp) { \
+ if ((cfgProp)&USB_PROP_IS_RAM) flags = 0; \
+ if ((cfgProp)&USB_PROP_IS_DYNAMIC) { \
+ len = usbFunctionDescriptor(rq); \
+ } else { \
+ len = USB_PROP_LENGTH(cfgProp); \
+ usbMsgPtr = (uchar *)(staticName); \
+ } \
}
/* usbDriverDescriptor() is similar to usbFunctionDescriptor(), but used
* internally for all types of descriptors.
*/
-static inline usbMsgLen_t usbDriverDescriptor(usbRequest_t *rq)
-{
-usbMsgLen_t len = 0;
-uchar flags = USB_FLG_MSGPTR_IS_ROM;
+static inline usbMsgLen_t usbDriverDescriptor(usbRequest_t *rq) {
+ usbMsgLen_t len = 0;
+ uchar flags = USB_FLG_MSGPTR_IS_ROM;
SWITCH_START(rq->wValue.bytes[1])
- SWITCH_CASE(USBDESCR_DEVICE) /* 1 */
- GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_DEVICE, usbDescriptorDevice)
- SWITCH_CASE(USBDESCR_CONFIG) /* 2 */
- GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_CONFIGURATION, usbDescriptorConfiguration)
- SWITCH_CASE(USBDESCR_STRING) /* 3 */
+ SWITCH_CASE(USBDESCR_DEVICE) /* 1 */
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_DEVICE, usbDescriptorDevice)
+ SWITCH_CASE(USBDESCR_CONFIG) /* 2 */
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_CONFIGURATION, usbDescriptorConfiguration)
+ SWITCH_CASE(USBDESCR_STRING) /* 3 */
#if USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC
- if(USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_RAM)
- flags = 0;
+ if (USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_RAM) flags = 0;
+ len = usbFunctionDescriptor(rq);
+#else /* USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC */
+ SWITCH_START(rq->wValue.bytes[0])
+ SWITCH_CASE(0)
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_0, usbDescriptorString0)
+ SWITCH_CASE(1)
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_VENDOR, usbDescriptorStringVendor)
+ SWITCH_CASE(2)
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_PRODUCT, usbDescriptorStringDevice)
+ SWITCH_CASE(3)
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER, usbDescriptorStringSerialNumber)
+ SWITCH_DEFAULT
+ if (USB_CFG_DESCR_PROPS_UNKNOWN & USB_PROP_IS_DYNAMIC) {
len = usbFunctionDescriptor(rq);
-#else /* USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC */
- SWITCH_START(rq->wValue.bytes[0])
- SWITCH_CASE(0)
- GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_0, usbDescriptorString0)
- SWITCH_CASE(1)
- GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_VENDOR, usbDescriptorStringVendor)
- SWITCH_CASE(2)
- GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_PRODUCT, usbDescriptorStringDevice)
- SWITCH_CASE(3)
- GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER, usbDescriptorStringSerialNumber)
- SWITCH_DEFAULT
- if(USB_CFG_DESCR_PROPS_UNKNOWN & USB_PROP_IS_DYNAMIC){
- len = usbFunctionDescriptor(rq);
- }
- SWITCH_END
-#endif /* USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC */
-#if USB_CFG_DESCR_PROPS_HID_REPORT /* only support HID descriptors if enabled */
- SWITCH_CASE(USBDESCR_HID) /* 0x21 */
- GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_HID, usbDescriptorConfiguration + 18)
- SWITCH_CASE(USBDESCR_HID_REPORT)/* 0x22 */
- GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_HID_REPORT, usbDescriptorHidReport)
+ }
+ SWITCH_END
+#endif /* USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC */
+#if USB_CFG_DESCR_PROPS_HID_REPORT /* only support HID descriptors if enabled */
+ SWITCH_CASE(USBDESCR_HID) /* 0x21 */
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_HID, usbDescriptorConfiguration + 18)
+ SWITCH_CASE(USBDESCR_HID_REPORT) /* 0x22 */
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_HID_REPORT, usbDescriptorHidReport)
#endif
SWITCH_DEFAULT
- if(USB_CFG_DESCR_PROPS_UNKNOWN & USB_PROP_IS_DYNAMIC){
- len = usbFunctionDescriptor(rq);
- }
+ if (USB_CFG_DESCR_PROPS_UNKNOWN & USB_PROP_IS_DYNAMIC) {
+ len = usbFunctionDescriptor(rq);
+ }
SWITCH_END
usbMsgFlags = flags;
return len;
@@ -359,56 +366,53 @@ uchar flags = USB_FLG_MSGPTR_IS_ROM;
/* usbDriverSetup() is similar to usbFunctionSetup(), but it's used for
* standard requests instead of class and custom requests.
*/
-static inline usbMsgLen_t usbDriverSetup(usbRequest_t *rq)
-{
-uchar len = 0, *dataPtr = usbTxBuf + 9; /* there are 2 bytes free space at the end of the buffer */
-uchar value = rq->wValue.bytes[0];
+static inline usbMsgLen_t usbDriverSetup(usbRequest_t *rq) {
+ uchar len = 0, *dataPtr = usbTxBuf + 9; /* there are 2 bytes free space at the end of the buffer */
+ uchar value = rq->wValue.bytes[0];
#if USB_CFG_IMPLEMENT_HALT
-uchar index = rq->wIndex.bytes[0];
+ uchar index = rq->wIndex.bytes[0];
#endif
dataPtr[0] = 0; /* default reply common to USBRQ_GET_STATUS and USBRQ_GET_INTERFACE */
SWITCH_START(rq->bRequest)
- SWITCH_CASE(USBRQ_GET_STATUS) /* 0 */
- uchar recipient = rq->bmRequestType & USBRQ_RCPT_MASK; /* assign arith ops to variables to enforce byte size */
- if(USB_CFG_IS_SELF_POWERED && recipient == USBRQ_RCPT_DEVICE)
- dataPtr[0] = USB_CFG_IS_SELF_POWERED;
+ SWITCH_CASE(USBRQ_GET_STATUS) /* 0 */
+ uchar recipient = rq->bmRequestType & USBRQ_RCPT_MASK; /* assign arith ops to variables to enforce byte size */
+ if (USB_CFG_IS_SELF_POWERED && recipient == USBRQ_RCPT_DEVICE) dataPtr[0] = USB_CFG_IS_SELF_POWERED;
#if USB_CFG_IMPLEMENT_HALT
- if(recipient == USBRQ_RCPT_ENDPOINT && index == 0x81) /* request status for endpoint 1 */
- dataPtr[0] = usbTxLen1 == USBPID_STALL;
+ if (recipient == USBRQ_RCPT_ENDPOINT && index == 0x81) /* request status for endpoint 1 */
+ dataPtr[0] = usbTxLen1 == USBPID_STALL;
#endif
- dataPtr[1] = 0;
- len = 2;
+ dataPtr[1] = 0;
+ len = 2;
#if USB_CFG_IMPLEMENT_HALT
- SWITCH_CASE2(USBRQ_CLEAR_FEATURE, USBRQ_SET_FEATURE) /* 1, 3 */
- if(value == 0 && index == 0x81){ /* feature 0 == HALT for endpoint == 1 */
- usbTxLen1 = rq->bRequest == USBRQ_CLEAR_FEATURE ? USBPID_NAK : USBPID_STALL;
- usbResetDataToggling();
- }
+ SWITCH_CASE2(USBRQ_CLEAR_FEATURE, USBRQ_SET_FEATURE) /* 1, 3 */
+ if (value == 0 && index == 0x81) { /* feature 0 == HALT for endpoint == 1 */
+ usbTxLen1 = rq->bRequest == USBRQ_CLEAR_FEATURE ? USBPID_NAK : USBPID_STALL;
+ usbResetDataToggling();
+ }
#endif
- SWITCH_CASE(USBRQ_SET_ADDRESS) /* 5 */
- usbNewDeviceAddr = value;
- USB_SET_ADDRESS_HOOK();
- SWITCH_CASE(USBRQ_GET_DESCRIPTOR) /* 6 */
- len = usbDriverDescriptor(rq);
- goto skipMsgPtrAssignment;
- SWITCH_CASE(USBRQ_GET_CONFIGURATION) /* 8 */
- dataPtr = &usbConfiguration; /* send current configuration value */
- len = 1;
- SWITCH_CASE(USBRQ_SET_CONFIGURATION) /* 9 */
- usbConfiguration = value;
- usbResetStall();
- SWITCH_CASE(USBRQ_GET_INTERFACE) /* 10 */
- len = 1;
+ SWITCH_CASE(USBRQ_SET_ADDRESS) /* 5 */
+ usbNewDeviceAddr = value;
+ USB_SET_ADDRESS_HOOK();
+ SWITCH_CASE(USBRQ_GET_DESCRIPTOR) /* 6 */
+ len = usbDriverDescriptor(rq);
+ goto skipMsgPtrAssignment;
+ SWITCH_CASE(USBRQ_GET_CONFIGURATION) /* 8 */
+ dataPtr = &usbConfiguration; /* send current configuration value */
+ len = 1;
+ SWITCH_CASE(USBRQ_SET_CONFIGURATION) /* 9 */
+ usbConfiguration = value;
+ usbResetStall();
+ SWITCH_CASE(USBRQ_GET_INTERFACE) /* 10 */
+ len = 1;
#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE
- SWITCH_CASE(USBRQ_SET_INTERFACE) /* 11 */
- usbResetDataToggling();
- usbResetStall();
+ SWITCH_CASE(USBRQ_SET_INTERFACE) /* 11 */
+ usbResetDataToggling();
+ usbResetStall();
#endif
- SWITCH_DEFAULT /* 7=SET_DESCRIPTOR, 12=SYNC_FRAME */
+ SWITCH_DEFAULT /* 7=SET_DESCRIPTOR, 12=SYNC_FRAME */
/* Should we add an optional hook here? */
- SWITCH_END
- usbMsgPtr = dataPtr;
+ SWITCH_END usbMsgPtr = dataPtr;
skipMsgPtrAssignment:
return len;
}
@@ -419,65 +423,64 @@ skipMsgPtrAssignment:
* routine. It distinguishes between SETUP and DATA packets and processes
* them accordingly.
*/
-static inline void usbProcessRx(uchar *data, uchar len)
-{
-usbRequest_t *rq = (void *)data;
-
-/* usbRxToken can be:
- * 0x2d 00101101 (USBPID_SETUP for setup data)
- * 0xe1 11100001 (USBPID_OUT: data phase of setup transfer)
- * 0...0x0f for OUT on endpoint X
- */
+static inline void usbProcessRx(uchar *data, uchar len) {
+ usbRequest_t *rq = (void *)data;
+
+ /* usbRxToken can be:
+ * 0x2d 00101101 (USBPID_SETUP for setup data)
+ * 0xe1 11100001 (USBPID_OUT: data phase of setup transfer)
+ * 0...0x0f for OUT on endpoint X
+ */
DBG2(0x10 + (usbRxToken & 0xf), data, len + 2); /* SETUP=1d, SETUP-DATA=11, OUTx=1x */
USB_RX_USER_HOOK(data, len)
#if USB_CFG_IMPLEMENT_FN_WRITEOUT
- if(usbRxToken < 0x10){ /* OUT to endpoint != 0: endpoint number in usbRxToken */
+ if (usbRxToken < 0x10) { /* OUT to endpoint != 0: endpoint number in usbRxToken */
usbFunctionWriteOut(data, len);
return;
}
#endif
- if(usbRxToken == (uchar)USBPID_SETUP){
- if(len != 8) /* Setup size must be always 8 bytes. Ignore otherwise. */
+ if (usbRxToken == (uchar)USBPID_SETUP) {
+ if (len != 8) /* Setup size must be always 8 bytes. Ignore otherwise. */
return;
usbMsgLen_t replyLen;
- usbTxBuf[0] = USBPID_DATA0; /* initialize data toggling */
- usbTxLen = USBPID_NAK; /* abort pending transmit */
+ usbTxBuf[0] = USBPID_DATA0; /* initialize data toggling */
+ usbTxLen = USBPID_NAK; /* abort pending transmit */
usbMsgFlags = 0;
- uchar type = rq->bmRequestType & USBRQ_TYPE_MASK;
- if(type != USBRQ_TYPE_STANDARD){ /* standard requests are handled by driver */
+ uchar type = rq->bmRequestType & USBRQ_TYPE_MASK;
+ if (type != USBRQ_TYPE_STANDARD) { /* standard requests are handled by driver */
replyLen = usbFunctionSetup(data);
- }else{
+ } else {
replyLen = usbDriverSetup(rq);
}
#if USB_CFG_IMPLEMENT_FN_READ || USB_CFG_IMPLEMENT_FN_WRITE
- if(replyLen == USB_NO_MSG){ /* use user-supplied read/write function */
+ if (replyLen == USB_NO_MSG) { /* use user-supplied read/write function */
/* do some conditioning on replyLen, but on IN transfers only */
- if((rq->bmRequestType & USBRQ_DIR_MASK) != USBRQ_DIR_HOST_TO_DEVICE){
- if(sizeof(replyLen) < sizeof(rq->wLength.word)){ /* help compiler with optimizing */
+ if ((rq->bmRequestType & USBRQ_DIR_MASK) != USBRQ_DIR_HOST_TO_DEVICE) {
+ if (sizeof(replyLen) < sizeof(rq->wLength.word)) { /* help compiler with optimizing */
replyLen = rq->wLength.bytes[0];
- }else{
+ } else {
replyLen = rq->wLength.word;
}
}
usbMsgFlags = USB_FLG_USE_USER_RW;
- }else /* The 'else' prevents that we limit a replyLen of USB_NO_MSG to the maximum transfer len. */
+ } else /* The 'else' prevents that we limit a replyLen of USB_NO_MSG to the maximum transfer len. */
#endif
- if(sizeof(replyLen) < sizeof(rq->wLength.word)){ /* help compiler with optimizing */
- if(!rq->wLength.bytes[1] && replyLen > rq->wLength.bytes[0]) /* limit length to max */
+ if (sizeof(replyLen) < sizeof(rq->wLength.word)) { /* help compiler with optimizing */
+ if (!rq->wLength.bytes[1] && replyLen > rq->wLength.bytes[0]) /* limit length to max */
replyLen = rq->wLength.bytes[0];
- }else{
- if(replyLen > rq->wLength.word) /* limit length to max */
+ } else {
+ if (replyLen > rq->wLength.word) /* limit length to max */
replyLen = rq->wLength.word;
}
usbMsgLen = replyLen;
- }else{ /* usbRxToken must be USBPID_OUT, which means data phase of setup (control-out) */
+ } else { /* usbRxToken must be USBPID_OUT, which means data phase of setup (control-out) */
#if USB_CFG_IMPLEMENT_FN_WRITE
- if(usbMsgFlags & USB_FLG_USE_USER_RW){
+ if (usbMsgFlags & USB_FLG_USE_USER_RW) {
uchar rval = usbFunctionWrite(data, len);
- if(rval == 0xff){ /* an error occurred */
+ if (rval == 0xff) { /* an error occurred */
usbTxLen = USBPID_STALL;
- }else if(rval != 0){ /* This was the final package */
- usbMsgLen = 0; /* answer with a zero-sized data packet */
+ } else if (rval != 0) { /* This was the final package */
+ usbMsgLen = 0; /* answer with a zero-sized data packet */
}
}
#endif
@@ -489,26 +492,25 @@ usbRequest_t *rq = (void *)data;
/* This function is similar to usbFunctionRead(), but it's also called for
* data handled automatically by the driver (e.g. descriptor reads).
*/
-static uchar usbDeviceRead(uchar *data, uchar len)
-{
- if(len > 0){ /* don't bother app with 0 sized reads */
+static uchar usbDeviceRead(uchar *data, uchar len) {
+ if (len > 0) { /* don't bother app with 0 sized reads */
#if USB_CFG_IMPLEMENT_FN_READ
- if(usbMsgFlags & USB_FLG_USE_USER_RW){
+ if (usbMsgFlags & USB_FLG_USE_USER_RW) {
len = usbFunctionRead(data, len);
- }else
+ } else
#endif
{
uchar i = len, *r = usbMsgPtr;
- if(usbMsgFlags & USB_FLG_MSGPTR_IS_ROM){ /* ROM data */
- do{
- uchar c = USB_READ_FLASH(r); /* assign to char size variable to enforce byte ops */
+ if (usbMsgFlags & USB_FLG_MSGPTR_IS_ROM) { /* ROM data */
+ do {
+ uchar c = USB_READ_FLASH(r); /* assign to char size variable to enforce byte ops */
*data++ = c;
r++;
- }while(--i);
- }else{ /* RAM data */
- do{
+ } while (--i);
+ } else { /* RAM data */
+ do {
*data++ = *r++;
- }while(--i);
+ } while (--i);
}
usbMsgPtr = r;
}
@@ -521,39 +523,36 @@ static uchar usbDeviceRead(uchar *data, uchar len)
/* usbBuildTxBlock() is called when we have data to transmit and the
* interrupt routine's transmit buffer is empty.
*/
-static inline void usbBuildTxBlock(void)
-{
-usbMsgLen_t wantLen;
-uchar len;
+static inline void usbBuildTxBlock(void) {
+ usbMsgLen_t wantLen;
+ uchar len;
wantLen = usbMsgLen;
- if(wantLen > 8)
- wantLen = 8;
+ if (wantLen > 8) wantLen = 8;
usbMsgLen -= wantLen;
usbTxBuf[0] ^= USBPID_DATA0 ^ USBPID_DATA1; /* DATA toggling */
len = usbDeviceRead(usbTxBuf + 1, wantLen);
- if(len <= 8){ /* valid data packet */
+ if (len <= 8) { /* valid data packet */
usbCrc16Append(&usbTxBuf[1], len);
- len += 4; /* length including sync byte */
- if(len < 12) /* a partial package identifies end of message */
+ len += 4; /* length including sync byte */
+ if (len < 12) /* a partial package identifies end of message */
usbMsgLen = USB_NO_MSG;
- }else{
- len = USBPID_STALL; /* stall the endpoint */
+ } else {
+ len = USBPID_STALL; /* stall the endpoint */
usbMsgLen = USB_NO_MSG;
}
usbTxLen = len;
- DBG2(0x20, usbTxBuf, len-1);
+ DBG2(0x20, usbTxBuf, len - 1);
}
/* ------------------------------------------------------------------------- */
-static inline void usbHandleResetHook(uchar notResetState)
-{
+static inline void usbHandleResetHook(uchar notResetState) {
#ifdef USB_RESET_HOOK
-static uchar wasReset;
-uchar isReset = !notResetState;
+ static uchar wasReset;
+ uchar isReset = !notResetState;
- if(wasReset != isReset){
+ if (wasReset != isReset) {
USB_RESET_HOOK(isReset);
wasReset = isReset;
}
@@ -562,40 +561,39 @@ uchar isReset = !notResetState;
/* ------------------------------------------------------------------------- */
-USB_PUBLIC void usbPoll(void)
-{
-schar len;
-uchar i;
+USB_PUBLIC void usbPoll(void) {
+ schar len;
+ uchar i;
len = usbRxLen - 3;
- if(len >= 0){
-/* We could check CRC16 here -- but ACK has already been sent anyway. If you
- * need data integrity checks with this driver, check the CRC in your app
- * code and report errors back to the host. Since the ACK was already sent,
- * retries must be handled on application level.
- * unsigned crc = usbCrc16(buffer + 1, usbRxLen - 3);
- */
+ if (len >= 0) {
+ /* We could check CRC16 here -- but ACK has already been sent anyway. If you
+ * need data integrity checks with this driver, check the CRC in your app
+ * code and report errors back to the host. Since the ACK was already sent,
+ * retries must be handled on application level.
+ * unsigned crc = usbCrc16(buffer + 1, usbRxLen - 3);
+ */
usbProcessRx(usbRxBuf + USB_BUFSIZE + 1 - usbInputBufOffset, len);
#if USB_CFG_HAVE_FLOWCONTROL
- if(usbRxLen > 0) /* only mark as available if not inactivated */
+ if (usbRxLen > 0) /* only mark as available if not inactivated */
usbRxLen = 0;
#else
- usbRxLen = 0; /* mark rx buffer as available */
+ usbRxLen = 0; /* mark rx buffer as available */
#endif
}
- if(usbTxLen & 0x10){ /* transmit system idle */
- if(usbMsgLen != USB_NO_MSG){ /* transmit data pending? */
+ if (usbTxLen & 0x10) { /* transmit system idle */
+ if (usbMsgLen != USB_NO_MSG) { /* transmit data pending? */
usbBuildTxBlock();
}
}
- for(i = 20; i > 0; i--){
+ for (i = 20; i > 0; i--) {
uchar usbLineStatus = USBIN & USBMASK;
- if(usbLineStatus != 0) /* SE0 has ended */
+ if (usbLineStatus != 0) /* SE0 has ended */
goto isNotReset;
}
/* RESET condition, called multiple times during reset */
usbNewDeviceAddr = 0;
- usbDeviceAddr = 0;
+ usbDeviceAddr = 0;
usbResetStall();
DBG1(0xff, 0, 0);
isNotReset:
@@ -604,8 +602,7 @@ isNotReset:
/* ------------------------------------------------------------------------- */
-USB_PUBLIC void usbInit(void)
-{
+USB_PUBLIC void usbInit(void) {
#if USB_INTR_CFG_SET != 0
USB_INTR_CFG |= USB_INTR_CFG_SET;
#endif
@@ -616,9 +613,9 @@ USB_PUBLIC void usbInit(void)
usbResetDataToggling();
#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE
usbTxLen1 = USBPID_NAK;
-#if USB_CFG_HAVE_INTRIN_ENDPOINT3
+# if USB_CFG_HAVE_INTRIN_ENDPOINT3
usbTxLen3 = USBPID_NAK;
-#endif
+# endif
#endif
}
diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrv.h b/tmk_core/protocol/vusb/usbdrv/usbdrv.h
index 42fe163720..88a1bce76e 100644
--- a/tmk_core/protocol/vusb/usbdrv/usbdrv.h
+++ b/tmk_core/protocol/vusb/usbdrv/usbdrv.h
@@ -122,7 +122,7 @@ USB messages, even if they address another (low-speed) device on the same bus.
/* --------------------------- Module Interface ---------------------------- */
/* ------------------------------------------------------------------------- */
-#define USBDRV_VERSION 20100715
+#define USBDRV_VERSION 20100715
/* This define uniquely identifies a driver version. It is a decimal number
* constructed from the driver's release date in the form YYYYMMDD. If the
* driver's behavior or interface changes, you can use this constant to
@@ -130,9 +130,8 @@ USB messages, even if they address another (low-speed) device on the same bus.
* older than 2006-01-25.
*/
-
#ifndef USB_PUBLIC
-#define USB_PUBLIC
+# define USB_PUBLIC
#endif
/* USB_PUBLIC is used as declaration attribute for all functions exported by
* the USB driver. The default is no attribute (see above). You may define it
@@ -142,28 +141,28 @@ USB messages, even if they address another (low-speed) device on the same bus.
*/
#ifndef __ASSEMBLER__
-#ifndef uchar
-#define uchar unsigned char
-#endif
-#ifndef schar
-#define schar signed char
-#endif
+# ifndef uchar
+# define uchar unsigned char
+# endif
+# ifndef schar
+# define schar signed char
+# endif
/* shortcuts for well defined 8 bit integer types */
-#if USB_CFG_LONG_TRANSFERS /* if more than 254 bytes transfer size required */
-# define usbMsgLen_t unsigned
-#else
-# define usbMsgLen_t uchar
-#endif
+# if USB_CFG_LONG_TRANSFERS /* if more than 254 bytes transfer size required */
+# define usbMsgLen_t unsigned
+# else
+# define usbMsgLen_t uchar
+# endif
/* usbMsgLen_t is the data type used for transfer lengths. By default, it is
* defined to uchar, allowing a maximum of 254 bytes (255 is reserved for
* USB_NO_MSG below). If the usbconfig.h defines USB_CFG_LONG_TRANSFERS to 1,
* a 16 bit data type is used, allowing up to 16384 bytes (the rest is used
* for flags in the descriptor configuration).
*/
-#define USB_NO_MSG ((usbMsgLen_t)-1) /* constant meaning "no message" */
+# define USB_NO_MSG ((usbMsgLen_t)-1) /* constant meaning "no message" */
-struct usbRequest; /* forward declaration */
+struct usbRequest; /* forward declaration */
USB_PUBLIC void usbInit(void);
/* This function must be called before interrupts are enabled and the main
@@ -216,7 +215,7 @@ USB_PUBLIC usbMsgLen_t usbFunctionDescriptor(struct usbRequest *rq);
* usbFunctionSetup() above, but it is called only to request USB descriptor
* data. See the documentation of usbFunctionSetup() above for more info.
*/
-#if USB_CFG_HAVE_INTRIN_ENDPOINT
+# if USB_CFG_HAVE_INTRIN_ENDPOINT
USB_PUBLIC void usbSetInterrupt(uchar *data, uchar len);
/* This function sets the message which will be sent during the next interrupt
* IN transfer. The message is copied to an internal buffer and must not exceed
@@ -224,19 +223,19 @@ USB_PUBLIC void usbSetInterrupt(uchar *data, uchar len);
* interrupt status to the host.
* If you need to transfer more bytes, use a control read after the interrupt.
*/
-#define usbInterruptIsReady() (usbTxLen1 & 0x10)
+# define usbInterruptIsReady() (usbTxLen1 & 0x10)
/* This macro indicates whether the last interrupt message has already been
* sent. If you set a new interrupt message before the old was sent, the
* message already buffered will be lost.
*/
-#if USB_CFG_HAVE_INTRIN_ENDPOINT3
+# if USB_CFG_HAVE_INTRIN_ENDPOINT3
USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len);
-#define usbInterruptIsReady3() (usbTxLen3 & 0x10)
+# define usbInterruptIsReady3() (usbTxLen3 & 0x10)
/* Same as above for endpoint 3 */
-#endif
-#endif /* USB_CFG_HAVE_INTRIN_ENDPOINT */
-#if USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH /* simplified interface for backward compatibility */
-#define usbHidReportDescriptor usbDescriptorHidReport
+# endif
+# endif /* USB_CFG_HAVE_INTRIN_ENDPOINT */
+# if USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH /* simplified interface for backward compatibility */
+# define usbHidReportDescriptor usbDescriptorHidReport
/* should be declared as: PROGMEM char usbHidReportDescriptor[]; */
/* If you implement an HID device, you need to provide a report descriptor.
* The HID report descriptor syntax is a bit complex. If you understand how
@@ -244,8 +243,8 @@ USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len);
* Descriptor Tool from usb.org, see http://www.usb.org/developers/hidpage/.
* Otherwise you should probably start with a working example.
*/
-#endif /* USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH */
-#if USB_CFG_IMPLEMENT_FN_WRITE
+# endif /* USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH */
+# if USB_CFG_IMPLEMENT_FN_WRITE
USB_PUBLIC uchar usbFunctionWrite(uchar *data, uchar len);
/* This function is called by the driver to provide a control transfer's
* payload data (control-out). It is called in chunks of up to 8 bytes. The
@@ -262,8 +261,8 @@ USB_PUBLIC uchar usbFunctionWrite(uchar *data, uchar len);
* In order to get usbFunctionWrite() called, define USB_CFG_IMPLEMENT_FN_WRITE
* to 1 in usbconfig.h and return 0xff in usbFunctionSetup()..
*/
-#endif /* USB_CFG_IMPLEMENT_FN_WRITE */
-#if USB_CFG_IMPLEMENT_FN_READ
+# endif /* USB_CFG_IMPLEMENT_FN_WRITE */
+# if USB_CFG_IMPLEMENT_FN_READ
USB_PUBLIC uchar usbFunctionRead(uchar *data, uchar len);
/* This function is called by the driver to ask the application for a control
* transfer's payload data (control-in). It is called in chunks of up to 8
@@ -274,26 +273,24 @@ USB_PUBLIC uchar usbFunctionRead(uchar *data, uchar len);
* In order to get usbFunctionRead() called, define USB_CFG_IMPLEMENT_FN_READ
* to 1 in usbconfig.h and return 0xff in usbFunctionSetup()..
*/
-#endif /* USB_CFG_IMPLEMENT_FN_READ */
+# endif /* USB_CFG_IMPLEMENT_FN_READ */
-extern uchar usbRxToken; /* may be used in usbFunctionWriteOut() below */
-#if USB_CFG_IMPLEMENT_FN_WRITEOUT
+extern uchar usbRxToken; /* may be used in usbFunctionWriteOut() below */
+# if USB_CFG_IMPLEMENT_FN_WRITEOUT
USB_PUBLIC void usbFunctionWriteOut(uchar *data, uchar len);
/* This function is called by the driver when data is received on an interrupt-
* or bulk-out endpoint. The endpoint number can be found in the global
* variable usbRxToken. You must define USB_CFG_IMPLEMENT_FN_WRITEOUT to 1 in
* usbconfig.h to get this function called.
*/
-#endif /* USB_CFG_IMPLEMENT_FN_WRITEOUT */
-#ifdef USB_CFG_PULLUP_IOPORTNAME
-#define usbDeviceConnect() ((USB_PULLUP_DDR |= (1<<USB_CFG_PULLUP_BIT)), \
- (USB_PULLUP_OUT |= (1<<USB_CFG_PULLUP_BIT)))
-#define usbDeviceDisconnect() ((USB_PULLUP_DDR &= ~(1<<USB_CFG_PULLUP_BIT)), \
- (USB_PULLUP_OUT &= ~(1<<USB_CFG_PULLUP_BIT)))
-#else /* USB_CFG_PULLUP_IOPORTNAME */
-#define usbDeviceConnect() (USBDDR &= ~(1<<USBMINUS))
-#define usbDeviceDisconnect() (USBDDR |= (1<<USBMINUS))
-#endif /* USB_CFG_PULLUP_IOPORTNAME */
+# endif /* USB_CFG_IMPLEMENT_FN_WRITEOUT */
+# ifdef USB_CFG_PULLUP_IOPORTNAME
+# define usbDeviceConnect() ((USB_PULLUP_DDR |= (1 << USB_CFG_PULLUP_BIT)), (USB_PULLUP_OUT |= (1 << USB_CFG_PULLUP_BIT)))
+# define usbDeviceDisconnect() ((USB_PULLUP_DDR &= ~(1 << USB_CFG_PULLUP_BIT)), (USB_PULLUP_OUT &= ~(1 << USB_CFG_PULLUP_BIT)))
+# else /* USB_CFG_PULLUP_IOPORTNAME */
+# define usbDeviceConnect() (USBDDR &= ~(1 << USBMINUS))
+# define usbDeviceDisconnect() (USBDDR |= (1 << USBMINUS))
+# endif /* USB_CFG_PULLUP_IOPORTNAME */
/* The macros usbDeviceConnect() and usbDeviceDisconnect() (intended to look
* like a function) connect resp. disconnect the device from the host's USB.
* If the constants USB_CFG_PULLUP_IOPORT and USB_CFG_PULLUP_BIT are defined
@@ -307,7 +304,7 @@ USB_PUBLIC void usbFunctionWriteOut(uchar *data, uchar len);
* or use cli() to disable interrupts globally.
*/
extern unsigned usbCrc16(unsigned data, uchar len);
-#define usbCrc16(data, len) usbCrc16((unsigned)(data), len)
+# define usbCrc16(data, len) usbCrc16((unsigned)(data), len)
/* This function calculates the binary complement of the data CRC used in
* USB data packets. The value is used to build raw transmit packets.
* You may want to use this function for data checksums or to verify received
@@ -315,12 +312,12 @@ extern unsigned usbCrc16(unsigned data, uchar len);
* tiny memory model.
*/
extern unsigned usbCrc16Append(unsigned data, uchar len);
-#define usbCrc16Append(data, len) usbCrc16Append((unsigned)(data), len)
+# define usbCrc16Append(data, len) usbCrc16Append((unsigned)(data), len)
/* This function is equivalent to usbCrc16() above, except that it appends
* the 2 bytes CRC (lowbyte first) in the 'data' buffer after reading 'len'
* bytes.
*/
-#if USB_CFG_HAVE_MEASURE_FRAME_LENGTH
+# if USB_CFG_HAVE_MEASURE_FRAME_LENGTH
extern unsigned usbMeasureFrameLength(void);
/* This function MUST be called IMMEDIATELY AFTER USB reset and measures 1/7 of
* the number of CPU cycles during one USB frame minus one low speed bit
@@ -329,59 +326,58 @@ extern unsigned usbMeasureFrameLength(void);
* calling this function.
* This can be used to calibrate the AVR's RC oscillator.
*/
-#endif
-extern uchar usbConfiguration;
+# endif
+extern uchar usbConfiguration;
/* This value contains the current configuration set by the host. The driver
* allows setting and querying of this variable with the USB SET_CONFIGURATION
* and GET_CONFIGURATION requests, but does not use it otherwise.
* You may want to reflect the "configured" status with a LED on the device or
* switch on high power parts of the circuit only if the device is configured.
*/
-#if USB_COUNT_SOF
-extern volatile uchar usbSofCount;
+# if USB_COUNT_SOF
+extern volatile uchar usbSofCount;
/* This variable is incremented on every SOF packet. It is only available if
* the macro USB_COUNT_SOF is defined to a value != 0.
*/
-#endif
-#if USB_CFG_CHECK_DATA_TOGGLING
-extern uchar usbCurrentDataToken;
+# endif
+# if USB_CFG_CHECK_DATA_TOGGLING
+extern uchar usbCurrentDataToken;
/* This variable can be checked in usbFunctionWrite() and usbFunctionWriteOut()
* to ignore duplicate packets.
*/
-#endif
+# endif
-#define USB_STRING_DESCRIPTOR_HEADER(stringLength) ((2*(stringLength)+2) | (3<<8))
+# define USB_STRING_DESCRIPTOR_HEADER(stringLength) ((2 * (stringLength) + 2) | (3 << 8))
/* This macro builds a descriptor header for a string descriptor given the
* string's length. See usbdrv.c for an example how to use it.
*/
-#if USB_CFG_HAVE_FLOWCONTROL
-extern volatile schar usbRxLen;
-#define usbDisableAllRequests() usbRxLen = -1
+# if USB_CFG_HAVE_FLOWCONTROL
+extern volatile schar usbRxLen;
+# define usbDisableAllRequests() usbRxLen = -1
/* Must be called from usbFunctionWrite(). This macro disables all data input
* from the USB interface. Requests from the host are answered with a NAK
* while they are disabled.
*/
-#define usbEnableAllRequests() usbRxLen = 0
+# define usbEnableAllRequests() usbRxLen = 0
/* May only be called if requests are disabled. This macro enables input from
* the USB interface after it has been disabled with usbDisableAllRequests().
*/
-#define usbAllRequestsAreDisabled() (usbRxLen < 0)
+# define usbAllRequestsAreDisabled() (usbRxLen < 0)
/* Use this macro to find out whether requests are disabled. It may be needed
* to ensure that usbEnableAllRequests() is never called when requests are
* enabled.
*/
-#endif
+# endif
-#define USB_SET_DATATOKEN1(token) usbTxBuf1[0] = token
-#define USB_SET_DATATOKEN3(token) usbTxBuf3[0] = token
+# define USB_SET_DATATOKEN1(token) usbTxBuf1[0] = token
+# define USB_SET_DATATOKEN3(token) usbTxBuf3[0] = token
/* These two macros can be used by application software to reset data toggling
* for interrupt-in endpoints 1 and 3. Since the token is toggled BEFORE
* sending data, you must set the opposite value of the token which should come
* first.
*/
-#endif /* __ASSEMBLER__ */
-
+#endif /* __ASSEMBLER__ */
/* ------------------------------------------------------------------------- */
/* ----------------- Definitions for Descriptor Properties ----------------- */
@@ -390,57 +386,57 @@ extern volatile schar usbRxLen;
* about the various methods to define USB descriptors. If you do nothing,
* the default descriptors will be used.
*/
-#define USB_PROP_IS_DYNAMIC (1 << 14)
+#define USB_PROP_IS_DYNAMIC (1 << 14)
/* If this property is set for a descriptor, usbFunctionDescriptor() will be
* used to obtain the particular descriptor. Data directly returned via
* usbMsgPtr are FLASH data by default, combine (OR) with USB_PROP_IS_RAM to
* return RAM data.
*/
-#define USB_PROP_IS_RAM (1 << 15)
+#define USB_PROP_IS_RAM (1 << 15)
/* If this property is set for a descriptor, the data is read from RAM
* memory instead of Flash. The property is used for all methods to provide
* external descriptors.
*/
-#define USB_PROP_LENGTH(len) ((len) & 0x3fff)
+#define USB_PROP_LENGTH(len) ((len)&0x3fff)
/* If a static external descriptor is used, this is the total length of the
* descriptor in bytes.
*/
/* all descriptors which may have properties: */
#ifndef USB_CFG_DESCR_PROPS_DEVICE
-#define USB_CFG_DESCR_PROPS_DEVICE 0
+# define USB_CFG_DESCR_PROPS_DEVICE 0
#endif
#ifndef USB_CFG_DESCR_PROPS_CONFIGURATION
-#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
+# define USB_CFG_DESCR_PROPS_CONFIGURATION 0
#endif
#ifndef USB_CFG_DESCR_PROPS_STRINGS
-#define USB_CFG_DESCR_PROPS_STRINGS 0
+# define USB_CFG_DESCR_PROPS_STRINGS 0
#endif
#ifndef USB_CFG_DESCR_PROPS_STRING_0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
+# define USB_CFG_DESCR_PROPS_STRING_0 0
#endif
#ifndef USB_CFG_DESCR_PROPS_STRING_VENDOR
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
+# define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
#endif
#ifndef USB_CFG_DESCR_PROPS_STRING_PRODUCT
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
+# define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
#endif
#ifndef USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+# define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
#endif
#ifndef USB_CFG_DESCR_PROPS_HID
-#define USB_CFG_DESCR_PROPS_HID 0
+# define USB_CFG_DESCR_PROPS_HID 0
#endif
#if !(USB_CFG_DESCR_PROPS_HID_REPORT)
-# undef USB_CFG_DESCR_PROPS_HID_REPORT
-# if USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH /* do some backward compatibility tricks */
-# define USB_CFG_DESCR_PROPS_HID_REPORT USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH
-# else
-# define USB_CFG_DESCR_PROPS_HID_REPORT 0
-# endif
+# undef USB_CFG_DESCR_PROPS_HID_REPORT
+# if USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH /* do some backward compatibility tricks */
+# define USB_CFG_DESCR_PROPS_HID_REPORT USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH
+# else
+# define USB_CFG_DESCR_PROPS_HID_REPORT 0
+# endif
#endif
#ifndef USB_CFG_DESCR_PROPS_UNKNOWN
-#define USB_CFG_DESCR_PROPS_UNKNOWN 0
+# define USB_CFG_DESCR_PROPS_UNKNOWN 0
#endif
/* ------------------ forward declaration of descriptors ------------------- */
@@ -449,46 +445,46 @@ extern volatile schar usbRxLen;
*/
#ifndef __ASSEMBLER__
extern
-#if !(USB_CFG_DESCR_PROPS_DEVICE & USB_PROP_IS_RAM)
-PROGMEM
-#endif
-const char usbDescriptorDevice[];
+# if !(USB_CFG_DESCR_PROPS_DEVICE & USB_PROP_IS_RAM)
+ PROGMEM
+# endif
+ const char usbDescriptorDevice[];
extern
-#if !(USB_CFG_DESCR_PROPS_CONFIGURATION & USB_PROP_IS_RAM)
-PROGMEM
-#endif
-const char usbDescriptorConfiguration[];
+# if !(USB_CFG_DESCR_PROPS_CONFIGURATION & USB_PROP_IS_RAM)
+ PROGMEM
+# endif
+ const char usbDescriptorConfiguration[];
extern
-#if !(USB_CFG_DESCR_PROPS_HID_REPORT & USB_PROP_IS_RAM)
-PROGMEM
-#endif
-const char usbDescriptorHidReport[];
+# if !(USB_CFG_DESCR_PROPS_HID_REPORT & USB_PROP_IS_RAM)
+ PROGMEM
+# endif
+ const char usbDescriptorHidReport[];
extern
-#if !(USB_CFG_DESCR_PROPS_STRING_0 & USB_PROP_IS_RAM)
-PROGMEM
-#endif
-const char usbDescriptorString0[];
+# if !(USB_CFG_DESCR_PROPS_STRING_0 & USB_PROP_IS_RAM)
+ PROGMEM
+# endif
+ const char usbDescriptorString0[];
extern
-#if !(USB_CFG_DESCR_PROPS_STRING_VENDOR & USB_PROP_IS_RAM)
-PROGMEM
-#endif
-const int usbDescriptorStringVendor[];
+# if !(USB_CFG_DESCR_PROPS_STRING_VENDOR & USB_PROP_IS_RAM)
+ PROGMEM
+# endif
+ const int usbDescriptorStringVendor[];
extern
-#if !(USB_CFG_DESCR_PROPS_STRING_PRODUCT & USB_PROP_IS_RAM)
-PROGMEM
-#endif
-const int usbDescriptorStringDevice[];
+# if !(USB_CFG_DESCR_PROPS_STRING_PRODUCT & USB_PROP_IS_RAM)
+ PROGMEM
+# endif
+ const int usbDescriptorStringDevice[];
extern
-#if !(USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER & USB_PROP_IS_RAM)
-PROGMEM
-#endif
-const int usbDescriptorStringSerialNumber[];
+# if !(USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER & USB_PROP_IS_RAM)
+ PROGMEM
+# endif
+ const int usbDescriptorStringSerialNumber[];
#endif /* __ASSEMBLER__ */
@@ -496,12 +492,12 @@ const int usbDescriptorStringSerialNumber[];
/* ------------------------ General Purpose Macros ------------------------- */
/* ------------------------------------------------------------------------- */
-#define USB_CONCAT(a, b) a ## b
-#define USB_CONCAT_EXPANDED(a, b) USB_CONCAT(a, b)
+#define USB_CONCAT(a, b) a##b
+#define USB_CONCAT_EXPANDED(a, b) USB_CONCAT(a, b)
-#define USB_OUTPORT(name) USB_CONCAT(PORT, name)
-#define USB_INPORT(name) USB_CONCAT(PIN, name)
-#define USB_DDRPORT(name) USB_CONCAT(DDR, name)
+#define USB_OUTPORT(name) USB_CONCAT(PORT, name)
+#define USB_INPORT(name) USB_CONCAT(PIN, name)
+#define USB_DDRPORT(name) USB_CONCAT(DDR, name)
/* The double-define trick above lets us concatenate strings which are
* defined by macros.
*/
@@ -511,7 +507,7 @@ const int usbDescriptorStringSerialNumber[];
/* ------------------------------------------------------------------------- */
#if !defined __ASSEMBLER__ && (!defined USB_CFG_VENDOR_ID || !defined USB_CFG_DEVICE_ID)
-#warning "You should define USB_CFG_VENDOR_ID and USB_CFG_DEVICE_ID in usbconfig.h"
+# warning "You should define USB_CFG_VENDOR_ID and USB_CFG_DEVICE_ID in usbconfig.h"
/* If the user has not defined IDs, we default to obdev's free IDs.
* See USB-IDs-for-free.txt for details.
*/
@@ -519,96 +515,96 @@ const int usbDescriptorStringSerialNumber[];
/* make sure we have a VID and PID defined, byte order is lowbyte, highbyte */
#ifndef USB_CFG_VENDOR_ID
-# define USB_CFG_VENDOR_ID 0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */
+# define USB_CFG_VENDOR_ID 0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */
#endif
#ifndef USB_CFG_DEVICE_ID
-# if USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH
-# define USB_CFG_DEVICE_ID 0xdf, 0x05 /* = 0x5df = 1503, shared PID for HIDs */
-# elif USB_CFG_INTERFACE_CLASS == 2
-# define USB_CFG_DEVICE_ID 0xe1, 0x05 /* = 0x5e1 = 1505, shared PID for CDC Modems */
-# else
-# define USB_CFG_DEVICE_ID 0xdc, 0x05 /* = 0x5dc = 1500, obdev's free PID */
-# endif
+# if USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH
+# define USB_CFG_DEVICE_ID 0xdf, 0x05 /* = 0x5df = 1503, shared PID for HIDs */
+# elif USB_CFG_INTERFACE_CLASS == 2
+# define USB_CFG_DEVICE_ID 0xe1, 0x05 /* = 0x5e1 = 1505, shared PID for CDC Modems */
+# else
+# define USB_CFG_DEVICE_ID 0xdc, 0x05 /* = 0x5dc = 1500, obdev's free PID */
+# endif
#endif
/* Derive Output, Input and DataDirection ports from port names */
#ifndef USB_CFG_IOPORTNAME
-#error "You must define USB_CFG_IOPORTNAME in usbconfig.h, see usbconfig-prototype.h"
+# error "You must define USB_CFG_IOPORTNAME in usbconfig.h, see usbconfig-prototype.h"
#endif
-#define USBOUT USB_OUTPORT(USB_CFG_IOPORTNAME)
-#define USB_PULLUP_OUT USB_OUTPORT(USB_CFG_PULLUP_IOPORTNAME)
-#define USBIN USB_INPORT(USB_CFG_IOPORTNAME)
-#define USBDDR USB_DDRPORT(USB_CFG_IOPORTNAME)
-#define USB_PULLUP_DDR USB_DDRPORT(USB_CFG_PULLUP_IOPORTNAME)
+#define USBOUT USB_OUTPORT(USB_CFG_IOPORTNAME)
+#define USB_PULLUP_OUT USB_OUTPORT(USB_CFG_PULLUP_IOPORTNAME)
+#define USBIN USB_INPORT(USB_CFG_IOPORTNAME)
+#define USBDDR USB_DDRPORT(USB_CFG_IOPORTNAME)
+#define USB_PULLUP_DDR USB_DDRPORT(USB_CFG_PULLUP_IOPORTNAME)
-#define USBMINUS USB_CFG_DMINUS_BIT
-#define USBPLUS USB_CFG_DPLUS_BIT
-#define USBIDLE (1<<USB_CFG_DMINUS_BIT) /* value representing J state */
-#define USBMASK ((1<<USB_CFG_DPLUS_BIT) | (1<<USB_CFG_DMINUS_BIT)) /* mask for USB I/O bits */
+#define USBMINUS USB_CFG_DMINUS_BIT
+#define USBPLUS USB_CFG_DPLUS_BIT
+#define USBIDLE (1 << USB_CFG_DMINUS_BIT) /* value representing J state */
+#define USBMASK ((1 << USB_CFG_DPLUS_BIT) | (1 << USB_CFG_DMINUS_BIT)) /* mask for USB I/O bits */
/* defines for backward compatibility with older driver versions: */
-#define USB_CFG_IOPORT USB_OUTPORT(USB_CFG_IOPORTNAME)
+#define USB_CFG_IOPORT USB_OUTPORT(USB_CFG_IOPORTNAME)
#ifdef USB_CFG_PULLUP_IOPORTNAME
-#define USB_CFG_PULLUP_IOPORT USB_OUTPORT(USB_CFG_PULLUP_IOPORTNAME)
+# define USB_CFG_PULLUP_IOPORT USB_OUTPORT(USB_CFG_PULLUP_IOPORTNAME)
#endif
-#ifndef USB_CFG_EP3_NUMBER /* if not defined in usbconfig.h */
-#define USB_CFG_EP3_NUMBER 3
+#ifndef USB_CFG_EP3_NUMBER /* if not defined in usbconfig.h */
+# define USB_CFG_EP3_NUMBER 3
#endif
#ifndef USB_CFG_HAVE_INTRIN_ENDPOINT3
-#define USB_CFG_HAVE_INTRIN_ENDPOINT3 0
+# define USB_CFG_HAVE_INTRIN_ENDPOINT3 0
#endif
-#define USB_BUFSIZE 11 /* PID, 8 bytes data, 2 bytes CRC */
+#define USB_BUFSIZE 11 /* PID, 8 bytes data, 2 bytes CRC */
/* ----- Try to find registers and bits responsible for ext interrupt 0 ----- */
-#ifndef USB_INTR_CFG /* allow user to override our default */
-# if defined EICRA
-# define USB_INTR_CFG EICRA
-# else
-# define USB_INTR_CFG MCUCR
-# endif
-#endif
-#ifndef USB_INTR_CFG_SET /* allow user to override our default */
-# if defined(USB_COUNT_SOF) || defined(USB_SOF_HOOK)
-# define USB_INTR_CFG_SET (1 << ISC01) /* cfg for falling edge */
- /* If any SOF logic is used, the interrupt must be wired to D- where
- * we better trigger on falling edge
- */
-# else
-# define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) /* cfg for rising edge */
-# endif
-#endif
-#ifndef USB_INTR_CFG_CLR /* allow user to override our default */
-# define USB_INTR_CFG_CLR 0 /* no bits to clear */
-#endif
-
-#ifndef USB_INTR_ENABLE /* allow user to override our default */
-# if defined GIMSK
-# define USB_INTR_ENABLE GIMSK
-# elif defined EIMSK
-# define USB_INTR_ENABLE EIMSK
-# else
-# define USB_INTR_ENABLE GICR
-# endif
+#ifndef USB_INTR_CFG /* allow user to override our default */
+# if defined EICRA
+# define USB_INTR_CFG EICRA
+# else
+# define USB_INTR_CFG MCUCR
+# endif
+#endif
+#ifndef USB_INTR_CFG_SET /* allow user to override our default */
+# if defined(USB_COUNT_SOF) || defined(USB_SOF_HOOK)
+# define USB_INTR_CFG_SET (1 << ISC01) /* cfg for falling edge */
+ /* If any SOF logic is used, the interrupt must be wired to D- where
+ * we better trigger on falling edge
+ */
+# else
+# define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) /* cfg for rising edge */
+# endif
+#endif
+#ifndef USB_INTR_CFG_CLR /* allow user to override our default */
+# define USB_INTR_CFG_CLR 0 /* no bits to clear */
+#endif
+
+#ifndef USB_INTR_ENABLE /* allow user to override our default */
+# if defined GIMSK
+# define USB_INTR_ENABLE GIMSK
+# elif defined EIMSK
+# define USB_INTR_ENABLE EIMSK
+# else
+# define USB_INTR_ENABLE GICR
+# endif
#endif
#ifndef USB_INTR_ENABLE_BIT /* allow user to override our default */
-# define USB_INTR_ENABLE_BIT INT0
+# define USB_INTR_ENABLE_BIT INT0
#endif
-#ifndef USB_INTR_PENDING /* allow user to override our default */
-# if defined EIFR
-# define USB_INTR_PENDING EIFR
-# else
-# define USB_INTR_PENDING GIFR
-# endif
+#ifndef USB_INTR_PENDING /* allow user to override our default */
+# if defined EIFR
+# define USB_INTR_PENDING EIFR
+# else
+# define USB_INTR_PENDING GIFR
+# endif
#endif
-#ifndef USB_INTR_PENDING_BIT /* allow user to override our default */
-# define USB_INTR_PENDING_BIT INTF0
+#ifndef USB_INTR_PENDING_BIT /* allow user to override our default */
+# define USB_INTR_PENDING_BIT INTF0
#endif
/*
@@ -628,46 +624,45 @@ at90s1200, attiny11, attiny12, attiny15, attiny28: these have no RAM
/* ------------------------------------------------------------------------- */
/* USB Token values */
-#define USBPID_SETUP 0x2d
-#define USBPID_OUT 0xe1
-#define USBPID_IN 0x69
-#define USBPID_DATA0 0xc3
-#define USBPID_DATA1 0x4b
+#define USBPID_SETUP 0x2d
+#define USBPID_OUT 0xe1
+#define USBPID_IN 0x69
+#define USBPID_DATA0 0xc3
+#define USBPID_DATA1 0x4b
-#define USBPID_ACK 0xd2
-#define USBPID_NAK 0x5a
-#define USBPID_STALL 0x1e
+#define USBPID_ACK 0xd2
+#define USBPID_NAK 0x5a
+#define USBPID_STALL 0x1e
#ifndef USB_INITIAL_DATATOKEN
-#define USB_INITIAL_DATATOKEN USBPID_DATA1
+# define USB_INITIAL_DATATOKEN USBPID_DATA1
#endif
#ifndef __ASSEMBLER__
-typedef struct usbTxStatus{
- volatile uchar len;
- uchar buffer[USB_BUFSIZE];
-}usbTxStatus_t;
-
-extern usbTxStatus_t usbTxStatus1, usbTxStatus3;
-#define usbTxLen1 usbTxStatus1.len
-#define usbTxBuf1 usbTxStatus1.buffer
-#define usbTxLen3 usbTxStatus3.len
-#define usbTxBuf3 usbTxStatus3.buffer
-
-
-typedef union usbWord{
- unsigned word;
- uchar bytes[2];
-}usbWord_t;
-
-typedef struct usbRequest{
- uchar bmRequestType;
- uchar bRequest;
- usbWord_t wValue;
- usbWord_t wIndex;
- usbWord_t wLength;
-}usbRequest_t;
+typedef struct usbTxStatus {
+ volatile uchar len;
+ uchar buffer[USB_BUFSIZE];
+} usbTxStatus_t;
+
+extern usbTxStatus_t usbTxStatus1, usbTxStatus3;
+# define usbTxLen1 usbTxStatus1.len
+# define usbTxBuf1 usbTxStatus1.buffer
+# define usbTxLen3 usbTxStatus3.len
+# define usbTxBuf3 usbTxStatus3.buffer
+
+typedef union usbWord {
+ unsigned word;
+ uchar bytes[2];
+} usbWord_t;
+
+typedef struct usbRequest {
+ uchar bmRequestType;
+ uchar bRequest;
+ usbWord_t wValue;
+ usbWord_t wIndex;
+ usbWord_t wLength;
+} usbRequest_t;
/* This structure matches the 8 byte setup request */
#endif
@@ -679,56 +674,56 @@ typedef struct usbRequest{
*/
/* USB setup recipient values */
-#define USBRQ_RCPT_MASK 0x1f
-#define USBRQ_RCPT_DEVICE 0
-#define USBRQ_RCPT_INTERFACE 1
-#define USBRQ_RCPT_ENDPOINT 2
+#define USBRQ_RCPT_MASK 0x1f
+#define USBRQ_RCPT_DEVICE 0
+#define USBRQ_RCPT_INTERFACE 1
+#define USBRQ_RCPT_ENDPOINT 2
/* USB request type values */
-#define USBRQ_TYPE_MASK 0x60
-#define USBRQ_TYPE_STANDARD (0<<5)
-#define USBRQ_TYPE_CLASS (1<<5)
-#define USBRQ_TYPE_VENDOR (2<<5)
+#define USBRQ_TYPE_MASK 0x60
+#define USBRQ_TYPE_STANDARD (0 << 5)
+#define USBRQ_TYPE_CLASS (1 << 5)
+#define USBRQ_TYPE_VENDOR (2 << 5)
/* USB direction values: */
-#define USBRQ_DIR_MASK 0x80
-#define USBRQ_DIR_HOST_TO_DEVICE (0<<7)
-#define USBRQ_DIR_DEVICE_TO_HOST (1<<7)
+#define USBRQ_DIR_MASK 0x80
+#define USBRQ_DIR_HOST_TO_DEVICE (0 << 7)
+#define USBRQ_DIR_DEVICE_TO_HOST (1 << 7)
/* USB Standard Requests */
-#define USBRQ_GET_STATUS 0
-#define USBRQ_CLEAR_FEATURE 1
-#define USBRQ_SET_FEATURE 3
-#define USBRQ_SET_ADDRESS 5
-#define USBRQ_GET_DESCRIPTOR 6
-#define USBRQ_SET_DESCRIPTOR 7
+#define USBRQ_GET_STATUS 0
+#define USBRQ_CLEAR_FEATURE 1
+#define USBRQ_SET_FEATURE 3
+#define USBRQ_SET_ADDRESS 5
+#define USBRQ_GET_DESCRIPTOR 6
+#define USBRQ_SET_DESCRIPTOR 7
#define USBRQ_GET_CONFIGURATION 8
#define USBRQ_SET_CONFIGURATION 9
-#define USBRQ_GET_INTERFACE 10
-#define USBRQ_SET_INTERFACE 11
-#define USBRQ_SYNCH_FRAME 12
+#define USBRQ_GET_INTERFACE 10
+#define USBRQ_SET_INTERFACE 11
+#define USBRQ_SYNCH_FRAME 12
/* USB descriptor constants */
-#define USBDESCR_DEVICE 1
-#define USBDESCR_CONFIG 2
-#define USBDESCR_STRING 3
-#define USBDESCR_INTERFACE 4
-#define USBDESCR_ENDPOINT 5
-#define USBDESCR_HID 0x21
-#define USBDESCR_HID_REPORT 0x22
-#define USBDESCR_HID_PHYS 0x23
+#define USBDESCR_DEVICE 1
+#define USBDESCR_CONFIG 2
+#define USBDESCR_STRING 3
+#define USBDESCR_INTERFACE 4
+#define USBDESCR_ENDPOINT 5
+#define USBDESCR_HID 0x21
+#define USBDESCR_HID_REPORT 0x22
+#define USBDESCR_HID_PHYS 0x23
//#define USBATTR_BUSPOWER 0x80 // USB 1.1 does not define this value any more
-#define USBATTR_SELFPOWER 0x40
-#define USBATTR_REMOTEWAKE 0x20
+#define USBATTR_SELFPOWER 0x40
+#define USBATTR_REMOTEWAKE 0x20
/* USB HID Requests */
-#define USBRQ_HID_GET_REPORT 0x01
-#define USBRQ_HID_GET_IDLE 0x02
-#define USBRQ_HID_GET_PROTOCOL 0x03
-#define USBRQ_HID_SET_REPORT 0x09
-#define USBRQ_HID_SET_IDLE 0x0a
-#define USBRQ_HID_SET_PROTOCOL 0x0b
+#define USBRQ_HID_GET_REPORT 0x01
+#define USBRQ_HID_GET_IDLE 0x02
+#define USBRQ_HID_GET_PROTOCOL 0x03
+#define USBRQ_HID_SET_REPORT 0x09
+#define USBRQ_HID_SET_IDLE 0x0a
+#define USBRQ_HID_SET_PROTOCOL 0x0b
/* ------------------------------------------------------------------------- */