diff options
Diffstat (limited to 'tmk_core/protocol/arm_atsam/spi.c')
| -rw-r--r-- | tmk_core/protocol/arm_atsam/spi.c | 87 |
1 files changed, 87 insertions, 0 deletions
diff --git a/tmk_core/protocol/arm_atsam/spi.c b/tmk_core/protocol/arm_atsam/spi.c new file mode 100644 index 0000000000..e275ba13f4 --- /dev/null +++ b/tmk_core/protocol/arm_atsam/spi.c @@ -0,0 +1,87 @@ +/* +Copyright 2018 Massdrop Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "arm_atsam_protocol.h" + +sr_exp_t sr_exp_data; + +void SR_EXP_WriteData(void) +{ + SR_EXP_RCLK_LO; + + while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.DRE)) { DBGC(DC_SPI_WRITE_DRE); } + + SR_EXP_SERCOM->SPI.DATA.bit.DATA = sr_exp_data.reg & 0xFF; //Shift in bits 7-0 + while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.TXC)) { DBGC(DC_SPI_WRITE_TXC_1); } + + SR_EXP_SERCOM->SPI.DATA.bit.DATA = (sr_exp_data.reg >> 8) & 0xFF; //Shift in bits 15-8 + while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.TXC)) { DBGC(DC_SPI_WRITE_TXC_2); } + + SR_EXP_RCLK_HI; +} + +void SR_EXP_Init(void) +{ + DBGC(DC_SPI_INIT_BEGIN); + + CLK_set_spi_freq(CHAN_SERCOM_SPI, FREQ_SPI_DEFAULT); + + //Set up MCU Shift Register pins + PORT->Group[SR_EXP_RCLK_PORT].DIRSET.reg = (1 << SR_EXP_RCLK_PIN); + PORT->Group[SR_EXP_OE_N_PORT].DIRSET.reg = (1 << SR_EXP_OE_N_PIN); + + //Set up MCU SPI pins + PORT->Group[SR_EXP_DATAOUT_PORT].PMUX[SR_EXP_DATAOUT_PIN / 2].bit.SR_EXP_DATAOUT_MUX_SEL = SR_EXP_DATAOUT_MUX; //MUX select for sercom + PORT->Group[SR_EXP_SCLK_PORT].PMUX[SR_EXP_SCLK_PIN / 2].bit.SR_EXP_SCLK_MUX_SEL = SR_EXP_SCLK_MUX; //MUX select for sercom + PORT->Group[SR_EXP_DATAOUT_PORT].PINCFG[SR_EXP_DATAOUT_PIN].bit.PMUXEN = 1; //MUX Enable + PORT->Group[SR_EXP_SCLK_PORT].PINCFG[SR_EXP_SCLK_PIN].bit.PMUXEN = 1; //MUX Enable + + //Initialize Shift Register + SR_EXP_OE_N_DIS; + SR_EXP_RCLK_HI; + + SR_EXP_SERCOM->SPI.CTRLA.bit.DORD = 1; //Data Order - LSB is transferred first + SR_EXP_SERCOM->SPI.CTRLA.bit.CPOL = 1; //Clock Polarity - SCK high when idle. Leading edge of cycle is falling. Trailing rising. + SR_EXP_SERCOM->SPI.CTRLA.bit.CPHA = 1; //Clock Phase - Leading Edge Falling, change, Trailing Edge - Rising, sample + SR_EXP_SERCOM->SPI.CTRLA.bit.DIPO = 3; //Data In Pinout - SERCOM PAD[3] is used as data input (Configure away from DOPO. Not using input.) + SR_EXP_SERCOM->SPI.CTRLA.bit.DOPO = 0; //Data Output PAD[0], Serial Clock PAD[1] + SR_EXP_SERCOM->SPI.CTRLA.bit.MODE = 3; //Operating Mode - Master operation + + SR_EXP_SERCOM->SPI.CTRLA.bit.ENABLE = 1; //Enable - Peripheral is enabled or being enabled + while (SR_EXP_SERCOM->SPI.SYNCBUSY.bit.ENABLE) { DBGC(DC_SPI_SYNC_ENABLING); } + + sr_exp_data.reg = 0; + sr_exp_data.bit.HUB_CONNECT = 0; + sr_exp_data.bit.HUB_RESET_N = 0; + sr_exp_data.bit.S_UP = 0; + sr_exp_data.bit.E_UP_N = 1; + sr_exp_data.bit.S_DN1 = 1; + sr_exp_data.bit.E_DN1_N = 1; + sr_exp_data.bit.E_VBUS_1 = 0; + sr_exp_data.bit.E_VBUS_2 = 0; + sr_exp_data.bit.SRC_1 = 1; + sr_exp_data.bit.SRC_2 = 1; + sr_exp_data.bit.IRST = 1; + sr_exp_data.bit.SDB_N = 0; + SR_EXP_WriteData(); + + //Enable Shift Register output + SR_EXP_OE_N_ENA; + + DBGC(DC_SPI_INIT_COMPLETE); +} + |