diff options
Diffstat (limited to 'protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c')
| -rw-r--r-- | protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c | 298 |
1 files changed, 298 insertions, 0 deletions
diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c b/protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c new file mode 100644 index 0000000000..8f3ec847f1 --- /dev/null +++ b/protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c @@ -0,0 +1,298 @@ +/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */ + +/* + Part of the Wiring project - http://wiring.uniandes.edu.co + + Copyright (c) 2004-05 Hernando Barragan + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 24 November 2006 by David A. Mellis + Modified 1 August 2010 by Mark Sproul +*/ + +#include <inttypes.h> +#include <avr/io.h> +#include <avr/interrupt.h> +#include <avr/pgmspace.h> +#include <stdio.h> + +#include "wiring_private.h" + +static volatile voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS]; +// volatile static voidFuncPtr twiIntFunc; + +void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) { + if(interruptNum < EXTERNAL_NUM_INTERRUPTS) { + intFunc[interruptNum] = userFunc; + + // Configure the interrupt mode (trigger on low input, any change, rising + // edge, or falling edge). The mode constants were chosen to correspond + // to the configuration bits in the hardware register, so we simply shift + // the mode into place. + + // Enable the interrupt. + + switch (interruptNum) { +#if defined(__AVR_ATmega32U4__) + // I hate doing this, but the register assignment differs between the 1280/2560 + // and the 32U4. Since avrlib defines registers PCMSK1 and PCMSK2 that aren't + // even present on the 32U4 this is the only way to distinguish between them. + case 0: + EICRA = (EICRA & ~((1<<ISC00) | (1<<ISC01))) | (mode << ISC00); + EIMSK |= (1<<INT0); + break; + case 1: + EICRA = (EICRA & ~((1<<ISC10) | (1<<ISC11))) | (mode << ISC10); + EIMSK |= (1<<INT1); + break; +#elif defined(EICRA) && defined(EICRB) && defined(EIMSK) + case 2: + EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + EIMSK |= (1 << INT0); + break; + case 3: + EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + EIMSK |= (1 << INT1); + break; + case 4: + EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20); + EIMSK |= (1 << INT2); + break; + case 5: + EICRA = (EICRA & ~((1 << ISC30) | (1 << ISC31))) | (mode << ISC30); + EIMSK |= (1 << INT3); + break; + case 0: + EICRB = (EICRB & ~((1 << ISC40) | (1 << ISC41))) | (mode << ISC40); + EIMSK |= (1 << INT4); + break; + case 1: + EICRB = (EICRB & ~((1 << ISC50) | (1 << ISC51))) | (mode << ISC50); + EIMSK |= (1 << INT5); + break; + case 6: + EICRB = (EICRB & ~((1 << ISC60) | (1 << ISC61))) | (mode << ISC60); + EIMSK |= (1 << INT6); + break; + case 7: + EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70); + EIMSK |= (1 << INT7); + break; +#else + case 0: + #if defined(EICRA) && defined(ISC00) && defined(EIMSK) + EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + EIMSK |= (1 << INT0); + #elif defined(MCUCR) && defined(ISC00) && defined(GICR) + MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + GICR |= (1 << INT0); + #elif defined(MCUCR) && defined(ISC00) && defined(GIMSK) + MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + GIMSK |= (1 << INT0); + #else + #error attachInterrupt not finished for this CPU (case 0) + #endif + break; + + case 1: + #if defined(EICRA) && defined(ISC10) && defined(ISC11) && defined(EIMSK) + EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + EIMSK |= (1 << INT1); + #elif defined(MCUCR) && defined(ISC10) && defined(ISC11) && defined(GICR) + MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + GICR |= (1 << INT1); + #elif defined(MCUCR) && defined(ISC10) && defined(GIMSK) && defined(GIMSK) + MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + GIMSK |= (1 << INT1); + #else + #warning attachInterrupt may need some more work for this cpu (case 1) + #endif + break; + + case 2: + #if defined(EICRA) && defined(ISC20) && defined(ISC21) && defined(EIMSK) + EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20); + EIMSK |= (1 << INT2); + #elif defined(MCUCR) && defined(ISC20) && defined(ISC21) && defined(GICR) + MCUCR = (MCUCR & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20); + GICR |= (1 << INT2); + #elif defined(MCUCR) && defined(ISC20) && defined(GIMSK) && defined(GIMSK) + MCUCR = (MCUCR & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20); + GIMSK |= (1 << INT2); + #endif + break; +#endif + } + } +} + +void detachInterrupt(uint8_t interruptNum) { + if(interruptNum < EXTERNAL_NUM_INTERRUPTS) { + // Disable the interrupt. (We can't assume that interruptNum is equal + // to the number of the EIMSK bit to clear, as this isn't true on the + // ATmega8. There, INT0 is 6 and INT1 is 7.) + switch (interruptNum) { +#if defined(__AVR_ATmega32U4__) + case 0: + EIMSK &= ~(1<<INT0); + break; + case 1: + EIMSK &= ~(1<<INT1); + break; +#elif defined(EICRA) && defined(EICRB) && defined(EIMSK) + case 2: + EIMSK &= ~(1 << INT0); + break; + case 3: + EIMSK &= ~(1 << INT1); + break; + case 4: + EIMSK &= ~(1 << INT2); + break; + case 5: + EIMSK &= ~(1 << INT3); + break; + case 0: + EIMSK &= ~(1 << INT4); + break; + case 1: + EIMSK &= ~(1 << INT5); + break; + case 6: + EIMSK &= ~(1 << INT6); + break; + case 7: + EIMSK &= ~(1 << INT7); + break; +#else + case 0: + #if defined(EIMSK) && defined(INT0) + EIMSK &= ~(1 << INT0); + #elif defined(GICR) && defined(ISC00) + GICR &= ~(1 << INT0); // atmega32 + #elif defined(GIMSK) && defined(INT0) + GIMSK &= ~(1 << INT0); + #else + #error detachInterrupt not finished for this cpu + #endif + break; + + case 1: + #if defined(EIMSK) && defined(INT1) + EIMSK &= ~(1 << INT1); + #elif defined(GICR) && defined(INT1) + GICR &= ~(1 << INT1); // atmega32 + #elif defined(GIMSK) && defined(INT1) + GIMSK &= ~(1 << INT1); + #else + #warning detachInterrupt may need some more work for this cpu (case 1) + #endif + break; +#endif + } + + intFunc[interruptNum] = 0; + } +} + +/* +void attachInterruptTwi(void (*userFunc)(void) ) { + twiIntFunc = userFunc; +} +*/ + +#if defined(__AVR_ATmega32U4__) +SIGNAL(INT0_vect) { + if(intFunc[EXTERNAL_INT_0]) + intFunc[EXTERNAL_INT_0](); +} + +SIGNAL(INT1_vect) { + if(intFunc[EXTERNAL_INT_1]) + intFunc[EXTERNAL_INT_1](); +} + +#elif defined(EICRA) && defined(EICRB) + +SIGNAL(INT0_vect) { + if(intFunc[EXTERNAL_INT_2]) + intFunc[EXTERNAL_INT_2](); +} + +SIGNAL(INT1_vect) { + if(intFunc[EXTERNAL_INT_3]) + intFunc[EXTERNAL_INT_3](); +} + +SIGNAL(INT2_vect) { + if(intFunc[EXTERNAL_INT_4]) + intFunc[EXTERNAL_INT_4](); +} + +SIGNAL(INT3_vect) { + if(intFunc[EXTERNAL_INT_5]) + intFunc[EXTERNAL_INT_5](); +} + +SIGNAL(INT4_vect) { + if(intFunc[EXTERNAL_INT_0]) + intFunc[EXTERNAL_INT_0](); +} + +SIGNAL(INT5_vect) { + if(intFunc[EXTERNAL_INT_1]) + intFunc[EXTERNAL_INT_1](); +} + +SIGNAL(INT6_vect) { + if(intFunc[EXTERNAL_INT_6]) + intFunc[EXTERNAL_INT_6](); +} + +SIGNAL(INT7_vect) { + if(intFunc[EXTERNAL_INT_7]) + intFunc[EXTERNAL_INT_7](); +} + +#else + +SIGNAL(INT0_vect) { + if(intFunc[EXTERNAL_INT_0]) + intFunc[EXTERNAL_INT_0](); +} + +SIGNAL(INT1_vect) { + if(intFunc[EXTERNAL_INT_1]) + intFunc[EXTERNAL_INT_1](); +} + +#if defined(EICRA) && defined(ISC20) +SIGNAL(INT2_vect) { + if(intFunc[EXTERNAL_INT_2]) + intFunc[EXTERNAL_INT_2](); +} +#endif + +#endif + +/* +SIGNAL(SIG_2WIRE_SERIAL) { + if(twiIntFunc) + twiIntFunc(); +} +*/ + |