summaryrefslogtreecommitdiff
path: root/platforms/chibios/bootloaders/stm32_dfu.c
diff options
context:
space:
mode:
Diffstat (limited to 'platforms/chibios/bootloaders/stm32_dfu.c')
-rw-r--r--platforms/chibios/bootloaders/stm32_dfu.c94
1 files changed, 94 insertions, 0 deletions
diff --git a/platforms/chibios/bootloaders/stm32_dfu.c b/platforms/chibios/bootloaders/stm32_dfu.c
new file mode 100644
index 0000000000..0e74111367
--- /dev/null
+++ b/platforms/chibios/bootloaders/stm32_dfu.c
@@ -0,0 +1,94 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <ch.h>
+#include <hal.h>
+#include "wait.h"
+
+extern uint32_t __ram0_end__;
+
+#ifndef STM32_BOOTLOADER_DUAL_BANK
+# define STM32_BOOTLOADER_DUAL_BANK FALSE
+#endif
+
+#if STM32_BOOTLOADER_DUAL_BANK
+# include "config_common.h"
+
+# ifndef STM32_BOOTLOADER_DUAL_BANK_GPIO
+# error "No STM32_BOOTLOADER_DUAL_BANK_GPIO defined, don't know which pin to toggle"
+# endif
+
+# ifndef STM32_BOOTLOADER_DUAL_BANK_POLARITY
+# define STM32_BOOTLOADER_DUAL_BANK_POLARITY 0
+# endif
+
+# ifndef STM32_BOOTLOADER_DUAL_BANK_DELAY
+# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100000
+# endif
+
+__attribute__((weak)) void bootloader_jump(void) {
+ // For STM32 MCUs with dual-bank flash, and we're incapable of jumping to the bootloader. The first valid flash
+ // bank is executed unconditionally after a reset, so it doesn't enter DFU unless BOOT0 is high. Instead, we do
+ // it with hardware...in this case, we pull a GPIO high/low depending on the configuration, connects 3.3V to
+ // BOOT0's RC charging circuit, lets it charge the capacitor, and issue a system reset. See the QMK discord
+ // #hardware channel pins for an example circuit.
+ palSetPadMode(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_MODE_OUTPUT_PUSHPULL);
+# if STM32_BOOTLOADER_DUAL_BANK_POLARITY
+ palSetPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO));
+# else
+ palClearPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO));
+# endif
+
+ // Wait for a while for the capacitor to charge
+ wait_ms(100);
+
+ // Issue a system reset to get the ROM bootloader to execute, with BOOT0 high
+ NVIC_SystemReset();
+}
+
+// not needed at all, but if anybody attempts to invoke it....
+void enter_bootloader_mode_if_requested(void) {}
+
+#else
+
+/* This code should be checked whether it runs correctly on platforms */
+# define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
+# define BOOTLOADER_MAGIC 0xDEADBEEF
+# define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4)
+
+__attribute__((weak)) void bootloader_jump(void) {
+ *MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader
+ NVIC_SystemReset();
+}
+
+void enter_bootloader_mode_if_requested(void) {
+ unsigned long *check = MAGIC_ADDR;
+ if (*check == BOOTLOADER_MAGIC) {
+ *check = 0;
+ __set_CONTROL(0);
+ __set_MSP(*(__IO uint32_t *)STM32_BOOTLOADER_ADDRESS);
+ __enable_irq();
+
+ typedef void (*BootJump_t)(void);
+ BootJump_t boot_jump = *(BootJump_t *)(STM32_BOOTLOADER_ADDRESS + 4);
+ boot_jump();
+ while (1)
+ ;
+ }
+}
+#endif