diff options
Diffstat (limited to 'lib/lufa/Projects/TempDataLogger/TempLogHostApp')
16 files changed, 1714 insertions, 0 deletions
diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/COPYING.LESSER.txt b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/COPYING.LESSER.txt new file mode 100644 index 0000000000..bdf8db0eed --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/COPYING.LESSER.txt @@ -0,0 +1,166 @@ + GNU LESSER GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + + This version of the GNU Lesser General Public License incorporates +the terms and conditions of version 3 of the GNU General Public +License, supplemented by the additional permissions listed below. + + 0. Additional Definitions. + + As used herein, "this License" refers to version 3 of the GNU Lesser +General Public License, and the "GNU GPL" refers to version 3 of the GNU +General Public License. + + "The Library" refers to a covered work governed by this License, +other than an Application or a Combined Work as defined below. + + An "Application" is any work that makes use of an interface provided +by the Library, but which is not otherwise based on the Library. +Defining a subclass of a class defined by the Library is deemed a mode +of using an interface provided by the Library. + + A "Combined Work" is a work produced by combining or linking an +Application with the Library. The particular version of the Library +with which the Combined Work was made is also called the "Linked +Version". + + The "Minimal Corresponding Source" for a Combined Work means the +Corresponding Source for the Combined Work, excluding any source code +for portions of the Combined Work that, considered in isolation, are +based on the Application, and not on the Linked Version. + + The "Corresponding Application Code" for a Combined Work means the +object code and/or source code for the Application, including any data +and utility programs needed for reproducing the Combined Work from the +Application, but excluding the System Libraries of the Combined Work. + + 1. Exception to Section 3 of the GNU GPL. + + You may convey a covered work under sections 3 and 4 of this License +without being bound by section 3 of the GNU GPL. + + 2. Conveying Modified Versions. + + If you modify a copy of the Library, and, in your modifications, a +facility refers to a function or data to be supplied by an Application +that uses the facility (other than as an argument passed when the +facility is invoked), then you may convey a copy of the modified +version: + + a) under this License, provided that you make a good faith effort to + ensure that, in the event an Application does not supply the + function or data, the facility still operates, and performs + whatever part of its purpose remains meaningful, or + + b) under the GNU GPL, with none of the additional permissions of + this License applicable to that copy. + + 3. Object Code Incorporating Material from Library Header Files. + + The object code form of an Application may incorporate material from +a header file that is part of the Library. You may convey such object +code under terms of your choice, provided that, if the incorporated +material is not limited to numerical parameters, data structure +layouts and accessors, or small macros, inline functions and templates +(ten or fewer lines in length), you do both of the following: + + a) Give prominent notice with each copy of the object code that the + Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the object code with a copy of the GNU GPL and this license + document. + + 4. Combined Works. + + You may convey a Combined Work under terms of your choice that, +taken together, effectively do not restrict modification of the +portions of the Library contained in the Combined Work and reverse +engineering for debugging such modifications, if you also do each of +the following: + + a) Give prominent notice with each copy of the Combined Work that + the Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the Combined Work with a copy of the GNU GPL and this license + document. + + c) For a Combined Work that displays copyright notices during + execution, include the copyright notice for the Library among + these notices, as well as a reference directing the user to the + copies of the GNU GPL and this license document. + + d) Do one of the following: + + 0) Convey the Minimal Corresponding Source under the terms of this + License, and the Corresponding Application Code in a form + suitable for, and under terms that permit, the user to + recombine or relink the Application with a modified version of + the Linked Version to produce a modified Combined Work, in the + manner specified by section 6 of the GNU GPL for conveying + Corresponding Source. + + 1) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (a) uses at run time + a copy of the Library already present on the user's computer + system, and (b) will operate properly with a modified version + of the Library that is interface-compatible with the Linked + Version. + + e) Provide Installation Information, but only if you would otherwise + be required to provide such information under section 6 of the + GNU GPL, and only to the extent that such information is + necessary to install and execute a modified version of the + Combined Work produced by recombining or relinking the + Application with a modified version of the Linked Version. (If + you use option 4d0, the Installation Information must accompany + the Minimal Corresponding Source and Corresponding Application + Code. If you use option 4d1, you must provide the Installation + Information in the manner specified by section 6 of the GNU GPL + for conveying Corresponding Source.) + + 5. Combined Libraries. + + You may place library facilities that are a work based on the +Library side by side in a single library together with other library +facilities that are not Applications and are not covered by this +License, and convey such a combined library under terms of your +choice, if you do both of the following: + + a) Accompany the combined library with a copy of the same work based + on the Library, uncombined with any other library facilities, + conveyed under the terms of this License. + + b) Give prominent notice with the combined library that part of it + is a work based on the Library, and explaining where to find the + accompanying uncombined form of the same work. + + 6. Revised Versions of the GNU Lesser General Public License. + + The Free Software Foundation may publish revised and/or new versions +of the GNU Lesser General Public License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the +Library as you received it specifies that a certain numbered version +of the GNU Lesser General Public License "or any later version" +applies to it, you have the option of following the terms and +conditions either of that published version or of any later version +published by the Free Software Foundation. If the Library as you +received it does not specify a version number of the GNU Lesser +General Public License, you may choose any version of the GNU Lesser +General Public License ever published by the Free Software Foundation. + + If the Library as you received it specifies that a proxy can decide +whether future versions of the GNU Lesser General Public License shall +apply, that proxy's public statement of acceptance of any version is +permanent authorization for you to choose that version for the +Library. + diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/COPYING.txt b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/COPYING.txt new file mode 100644 index 0000000000..10926e87f1 --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/COPYING.txt @@ -0,0 +1,675 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + <program> Copyright (C) <year> <name of author> + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +<http://www.gnu.org/licenses/>. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +<http://www.gnu.org/philosophy/why-not-lgpl.html>. + diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs new file mode 100644 index 0000000000..58fac51449 --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs @@ -0,0 +1,181 @@ +namespace Project1HostApp +{ + partial class frmDataloggerSettings + { + /// <summary> + /// Required designer variable. + /// </summary> + private System.ComponentModel.IContainer components = null; + + /// <summary> + /// Clean up any resources being used. + /// </summary> + /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param> + protected override void Dispose(bool disposing) + { + if (disposing && (components != null)) + { + components.Dispose(); + } + base.Dispose(disposing); + } + + #region Windows Form Designer generated code + + /// <summary> + /// Required method for Designer support - do not modify + /// the contents of this method with the code editor. + /// </summary> + private void InitializeComponent() + { + this.btnSetValues = new System.Windows.Forms.Button(); + this.dtpTime = new System.Windows.Forms.DateTimePicker(); + this.lblTime = new System.Windows.Forms.Label(); + this.lblLoggingInterval = new System.Windows.Forms.Label(); + this.nudLogInterval = new System.Windows.Forms.NumericUpDown(); + this.lblSeconds = new System.Windows.Forms.Label(); + this.btnGetValues = new System.Windows.Forms.Button(); + this.lblDate = new System.Windows.Forms.Label(); + this.dtpDate = new System.Windows.Forms.DateTimePicker(); + ((System.ComponentModel.ISupportInitialize)(this.nudLogInterval)).BeginInit(); + this.SuspendLayout(); + // + // btnSetValues + // + this.btnSetValues.Location = new System.Drawing.Point(168, 136); + this.btnSetValues.Name = "btnSetValues"; + this.btnSetValues.Size = new System.Drawing.Size(90, 35); + this.btnSetValues.TabIndex = 0; + this.btnSetValues.Text = "Set Values"; + this.btnSetValues.UseVisualStyleBackColor = true; + this.btnSetValues.Click += new System.EventHandler(this.btnSetValues_Click); + // + // dtpTime + // + this.dtpTime.CustomFormat = ""; + this.dtpTime.Format = System.Windows.Forms.DateTimePickerFormat.Time; + this.dtpTime.Location = new System.Drawing.Point(148, 61); + this.dtpTime.Name = "dtpTime"; + this.dtpTime.ShowUpDown = true; + this.dtpTime.Size = new System.Drawing.Size(110, 20); + this.dtpTime.TabIndex = 1; + // + // lblTime + // + this.lblTime.AutoSize = true; + this.lblTime.Font = new System.Drawing.Font("Microsoft Sans Serif", 8.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0))); + this.lblTime.Location = new System.Drawing.Point(51, 67); + this.lblTime.Name = "lblTime"; + this.lblTime.Size = new System.Drawing.Size(82, 13); + this.lblTime.TabIndex = 2; + this.lblTime.Text = "Device Time:"; + // + // lblLoggingInterval + // + this.lblLoggingInterval.AutoSize = true; + this.lblLoggingInterval.Font = new System.Drawing.Font("Microsoft Sans Serif", 8.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0))); + this.lblLoggingInterval.Location = new System.Drawing.Point(30, 101); + this.lblLoggingInterval.Name = "lblLoggingInterval"; + this.lblLoggingInterval.Size = new System.Drawing.Size(103, 13); + this.lblLoggingInterval.TabIndex = 3; + this.lblLoggingInterval.Text = "Logging Interval:"; + // + // nudLogInterval + // + this.nudLogInterval.Location = new System.Drawing.Point(148, 94); + this.nudLogInterval.Maximum = new decimal(new int[] { + 60, + 0, + 0, + 0}); + this.nudLogInterval.Minimum = new decimal(new int[] { + 1, + 0, + 0, + 0}); + this.nudLogInterval.Name = "nudLogInterval"; + this.nudLogInterval.Size = new System.Drawing.Size(51, 20); + this.nudLogInterval.TabIndex = 5; + this.nudLogInterval.Value = new decimal(new int[] { + 5, + 0, + 0, + 0}); + // + // lblSeconds + // + this.lblSeconds.AutoSize = true; + this.lblSeconds.Location = new System.Drawing.Point(209, 101); + this.lblSeconds.Name = "lblSeconds"; + this.lblSeconds.Size = new System.Drawing.Size(49, 13); + this.lblSeconds.TabIndex = 6; + this.lblSeconds.Text = "Seconds"; + // + // btnGetValues + // + this.btnGetValues.Location = new System.Drawing.Point(30, 136); + this.btnGetValues.Name = "btnGetValues"; + this.btnGetValues.Size = new System.Drawing.Size(90, 35); + this.btnGetValues.TabIndex = 7; + this.btnGetValues.Text = "Get Values"; + this.btnGetValues.UseVisualStyleBackColor = true; + this.btnGetValues.Click += new System.EventHandler(this.btnGetValues_Click); + // + // lblDate + // + this.lblDate.AutoSize = true; + this.lblDate.Font = new System.Drawing.Font("Microsoft Sans Serif", 8.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0))); + this.lblDate.Location = new System.Drawing.Point(51, 33); + this.lblDate.Name = "lblDate"; + this.lblDate.Size = new System.Drawing.Size(82, 13); + this.lblDate.TabIndex = 8; + this.lblDate.Text = "Device Date:"; + // + // dtpDate + // + this.dtpDate.CustomFormat = "dd/MM/yyyy"; + this.dtpDate.Format = System.Windows.Forms.DateTimePickerFormat.Custom; + this.dtpDate.Location = new System.Drawing.Point(148, 27); + this.dtpDate.Name = "dtpDate"; + this.dtpDate.Size = new System.Drawing.Size(110, 20); + this.dtpDate.TabIndex = 9; + // + // frmDataloggerSettings + // + this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F); + this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font; + this.ClientSize = new System.Drawing.Size(300, 197); + this.Controls.Add(this.dtpDate); + this.Controls.Add(this.lblDate); + this.Controls.Add(this.btnGetValues); + this.Controls.Add(this.lblSeconds); + this.Controls.Add(this.nudLogInterval); + this.Controls.Add(this.lblLoggingInterval); + this.Controls.Add(this.lblTime); + this.Controls.Add(this.dtpTime); + this.Controls.Add(this.btnSetValues); + this.MaximizeBox = false; + this.MinimizeBox = false; + this.Name = "frmDataloggerSettings"; + this.Text = "Datalogger"; + this.Load += new System.EventHandler(this.frmDataloggerSettings_Load); + ((System.ComponentModel.ISupportInitialize)(this.nudLogInterval)).EndInit(); + this.ResumeLayout(false); + this.PerformLayout(); + + } + + #endregion + + private System.Windows.Forms.Button btnSetValues; + private System.Windows.Forms.DateTimePicker dtpTime; + private System.Windows.Forms.Label lblTime; + private System.Windows.Forms.Label lblLoggingInterval; + private System.Windows.Forms.NumericUpDown nudLogInterval; + private System.Windows.Forms.Label lblSeconds; + private System.Windows.Forms.Button btnGetValues; + private System.Windows.Forms.Label lblDate; + private System.Windows.Forms.DateTimePicker dtpDate; + } +} + diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs new file mode 100644 index 0000000000..c3d1e15645 --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs @@ -0,0 +1,179 @@ +using System; +using System.Collections.Generic; +using System.ComponentModel; +using System.Data; +using System.Drawing; +using System.Linq; +using System.Text; +using System.Windows.Forms; +using Hid; + +namespace Project1HostApp +{ + public partial class frmDataloggerSettings : Form + { + private const int DEVICE_VID = 0x03EB; + private const int DEVICE_PID = 0x2063; + + private struct Device_Report_t + { + public Byte Day; + public Byte Month; + public Byte Year; + + public Byte Hour; + public Byte Minute; + public Byte Second; + + public Byte LogInterval500MS; + + public Byte[] ToReport() + { + Byte[] Report = new Byte[7]; + + Report[0] = this.Hour; + Report[1] = this.Minute; + Report[2] = this.Second; + Report[3] = this.Day; + Report[4] = this.Month; + Report[5] = this.Year; + Report[6] = this.LogInterval500MS; + + return Report; + } + + public void FromReport(Byte[] Report) + { + this.Hour = Report[0]; + this.Minute = Report[1]; + this.Second = Report[2]; + this.Day = Report[3]; + this.Month = Report[4]; + this.Year = Report[5]; + this.LogInterval500MS = Report[6]; + } + }; + + private IDevice GetDeviceConnection() + { + IDevice[] ConnectedDevices = DeviceFactory.Enumerate(DEVICE_VID, DEVICE_PID); + IDevice ConnectionHandle = null; + + if (ConnectedDevices.Count() > 0) + ConnectionHandle = ConnectedDevices[0]; + else + return null; + + // Fix report handle under Windows + if (ConnectionHandle is Hid.Win32.Win32DeviceSet) + { + ((Hid.Win32.Win32DeviceSet)ConnectionHandle).AddDevice(0x00, + ((Hid.Win32.Win32DeviceSet)ConnectionHandle).UnallocatedDevices[0]); + } + + return ConnectionHandle; + } + + public frmDataloggerSettings() + { + InitializeComponent(); + } + + private void btnSetValues_Click(object sender, EventArgs e) + { + IDevice ConnectionHandle = GetDeviceConnection(); + + if (ConnectionHandle == null) + { + MessageBox.Show("Error: Cannot connect to Datalogger device."); + return; + } + + Device_Report_t DeviceReport = new Device_Report_t(); + DeviceReport.Day = (byte)dtpDate.Value.Day; + DeviceReport.Month = (byte)dtpDate.Value.Month; + DeviceReport.Year = (byte)((dtpDate.Value.Year < 2000) ? 0 : (dtpDate.Value.Year - 2000)); + DeviceReport.Hour = (byte)dtpTime.Value.Hour; + DeviceReport.Minute = (byte)dtpTime.Value.Minute; + DeviceReport.Second = (byte)dtpTime.Value.Second; + DeviceReport.LogInterval500MS = (byte)(nudLogInterval.Value * 2); + + try + { + ConnectionHandle.Write(0x00, DeviceReport.ToReport()); + MessageBox.Show("Device parameters updated successfully."); + } + catch (Exception ex) + { + MessageBox.Show("Error: " + ex.Message); + } + } + + private void btnGetValues_Click(object sender, EventArgs e) + { + IDevice ConnectionHandle = GetDeviceConnection(); + + if (ConnectionHandle == null) + { + MessageBox.Show("Error: Cannot connect to Datalogger device."); + return; + } + + Device_Report_t DeviceReport = new Device_Report_t(); + + try + { + Byte[] Report = new Byte[7]; + + ConnectionHandle.Read(0x00, Report); + DeviceReport.FromReport(Report); + String msgText = "Device parameters retrieved successfully."; + + try + { + dtpDate.Value = new DateTime( + (2000 + DeviceReport.Year), + DeviceReport.Month, + DeviceReport.Day); + + dtpTime.Value = new DateTime( + DateTime.Now.Year, DateTime.Now.Month, DateTime.Now.Day, + DeviceReport.Hour, + DeviceReport.Minute, + DeviceReport.Second); + } + catch (Exception ex) + { + msgText = "Problem reading device:\n" + + ex.Message + + "\nY:" + DeviceReport.Year.ToString() + + " M:" + DeviceReport.Month.ToString() + + " D:" + DeviceReport.Day.ToString() + + "\n\nUsing current date and time."; + dtpDate.Value = DateTime.Now; + dtpTime.Value = DateTime.Now; + } + + try + { + nudLogInterval.Value = (DeviceReport.LogInterval500MS / 2); + } + catch (Exception ex) + { + nudLogInterval.Value = nudLogInterval.Minimum; + } + + MessageBox.Show(msgText); + } + catch (Exception ex) + { + MessageBox.Show("Error: " + ex.Message); + } + } + + private void frmDataloggerSettings_Load(object sender, EventArgs e) + { + + } + } +} diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.resx b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.resx new file mode 100644 index 0000000000..19dc0dd8b3 --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.resx @@ -0,0 +1,120 @@ +<?xml version="1.0" encoding="utf-8"?> +<root> + <!-- + Microsoft ResX Schema + + Version 2.0 + + The primary goals of this format is to allow a simple XML format + that is mostly human readable. The generation and parsing of the + various data types are done through the TypeConverter classes + associated with the data types. + + Example: + + ... ado.net/XML headers & schema ... + <resheader name="resmimetype">text/microsoft-resx</resheader> + <resheader name="version">2.0</resheader> + <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader> + <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader> + <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data> + <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data> + <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64"> + <value>[base64 mime encoded serialized .NET Framework object]</value> + </data> + <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64"> + <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value> + <comment>This is a comment</comment> + </data> + + There are any number of "resheader" rows that contain simple + name/value pairs. + + Each data row contains a name, and value. The row also contains a + type or mimetype. Type corresponds to a .NET class that support + text/value conversion through the TypeConverter architecture. + Classes that don't support this are serialized and stored with the + mimetype set. + + The mimetype is used for serialized objects, and tells the + ResXResourceReader how to depersist the object. This is currently not + extensible. For a given mimetype the value must be set accordingly: + + Note - application/x-microsoft.net.object.binary.base64 is the format + that the ResXResourceWriter will generate, however the reader can + read any of the formats listed below. + + mimetype: application/x-microsoft.net.object.binary.base64 + value : The object must be serialized with + : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter + : and then encoded with base64 encoding. + + mimetype: application/x-microsoft.net.object.soap.base64 + value : The object must be serialized with + : System.Runtime.Serialization.Formatters.Soap.SoapFormatter + : and then encoded with base64 encoding. + + mimetype: application/x-microsoft.net.object.bytearray.base64 + value : The object must be serialized into a byte array + : using a System.ComponentModel.TypeConverter + : and then encoded with base64 encoding. + --> + <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata"> + <xsd:import namespace="http://www.w3.org/XML/1998/namespace" /> + <xsd:element name="root" msdata:IsDataSet="true"> + <xsd:complexType> + <xsd:choice maxOccurs="unbounded"> + <xsd:element name="metadata"> + <xsd:complexType> + <xsd:sequence> + <xsd:element name="value" type="xsd:string" minOccurs="0" /> + </xsd:sequence> + <xsd:attribute name="name" use="required" type="xsd:string" /> + <xsd:attribute name="type" type="xsd:string" /> + <xsd:attribute name="mimetype" type="xsd:string" /> + <xsd:attribute ref="xml:space" /> + </xsd:complexType> + </xsd:element> + <xsd:element name="assembly"> + <xsd:complexType> + <xsd:attribute name="alias" type="xsd:string" /> + <xsd:attribute name="name" type="xsd:string" /> + </xsd:complexType> + </xsd:element> + <xsd:element name="data"> + <xsd:complexType> + <xsd:sequence> + <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" /> + <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" /> + </xsd:sequence> + <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" /> + <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" /> + <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" /> + <xsd:attribute ref="xml:space" /> + </xsd:complexType> + </xsd:element> + <xsd:element name="resheader"> + <xsd:complexType> + <xsd:sequence> + <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" /> + </xsd:sequence> + <xsd:attribute name="name" type="xsd:string" use="required" /> + </xsd:complexType> + </xsd:element> + </xsd:choice> + </xsd:complexType> + </xsd:element> + </xsd:schema> + <resheader name="resmimetype"> + <value>text/microsoft-resx</value> + </resheader> + <resheader name="version"> + <value>2.0</value> + </resheader> + <resheader name="reader"> + <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value> + </resheader> + <resheader name="writer"> + <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value> + </resheader> +</root>
\ No newline at end of file diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Hid.Linux.dll b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Hid.Linux.dll Binary files differnew file mode 100644 index 0000000000..4c19edd212 --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Hid.Linux.dll diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Hid.Net.dll b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Hid.Net.dll Binary files differnew file mode 100644 index 0000000000..2a7112fc09 --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Hid.Net.dll diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Hid.Win32.dll b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Hid.Win32.dll Binary files differnew file mode 100644 index 0000000000..3693c6ca04 --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Hid.Win32.dll diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Program.cs b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Program.cs new file mode 100644 index 0000000000..2588e60c14 --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Program.cs @@ -0,0 +1,21 @@ +using System; +using System.Collections.Generic; +using System.Linq; +using System.Windows.Forms; + +namespace Project1HostApp +{ + static class Program + { + /// <summary> + /// The main entry point for the application. + /// </summary> + [STAThread] + static void Main() + { + Application.EnableVisualStyles(); + Application.SetCompatibleTextRenderingDefault(false); + Application.Run(new frmDataloggerSettings()); + } + } +} diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..a4d0ab1d5f --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs @@ -0,0 +1,36 @@ +using System.Reflection; +using System.Runtime.CompilerServices; +using System.Runtime.InteropServices; + +// General Information about an assembly is controlled through the following +// set of attributes. Change these attribute values to modify the information +// associated with an assembly. +[assembly: AssemblyTitle("TempDataLoggerHostApp")] +[assembly: AssemblyDescription("")] +[assembly: AssemblyConfiguration("")] +[assembly: AssemblyCompany("Dean Camera")] +[assembly: AssemblyProduct("Temp Datalogger HostApp")] +[assembly: AssemblyCopyright("Copyright © Dean Camera 2011")] +[assembly: AssemblyTrademark("")] +[assembly: AssemblyCulture("")] + +// Setting ComVisible to false makes the types in this assembly not visible +// to COM components. If you need to access a type in this assembly from +// COM, set the ComVisible attribute to true on that type. +[assembly: ComVisible(false)] + +// The following GUID is for the ID of the typelib if this project is exposed to COM +[assembly: Guid("f41d67c7-13b2-4710-9e0f-f78e7f2bf2e9")] + +// Version information for an assembly consists of the following four values: +// +// Major Version +// Minor Version +// Build Number +// Revision +// +// You can specify all the values or you can default the Build and Revision Numbers +// by using the '*' as shown below: +// [assembly: AssemblyVersion("1.0.*")] +[assembly: AssemblyVersion("1.0.0.0")] +[assembly: AssemblyFileVersion("1.0.0.0")] diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/Resources.Designer.cs b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/Resources.Designer.cs new file mode 100644 index 0000000000..63b1af40d2 --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/Resources.Designer.cs @@ -0,0 +1,63 @@ +//------------------------------------------------------------------------------ +// <auto-generated> +// This code was generated by a tool. +// Runtime Version:4.0.30319.239 +// +// Changes to this file may cause incorrect behavior and will be lost if +// the code is regenerated. +// </auto-generated> +//------------------------------------------------------------------------------ + +namespace TemperatureLoggerHostApp.Properties { + using System; + + + /// <summary> + /// A strongly-typed resource class, for looking up localized strings, etc. + /// </summary> + // This class was auto-generated by the StronglyTypedResourceBuilder + // class via a tool like ResGen or Visual Studio. + // To add or remove a member, edit your .ResX file then rerun ResGen + // with the /str option, or rebuild your VS project. + [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")] + [global::System.Diagnostics.DebuggerNonUserCodeAttribute()] + [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()] + internal class Resources { + + private static global::System.Resources.ResourceManager resourceMan; + + private static global::System.Globalization.CultureInfo resourceCulture; + + [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")] + internal Resources() { + } + + /// <summary> + /// Returns the cached ResourceManager instance used by this class. + /// </summary> + [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)] + internal static global::System.Resources.ResourceManager ResourceManager { + get { + if (object.ReferenceEquals(resourceMan, null)) { + global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("TemperatureLoggerHostApp.Properties.Resources", typeof(Resources).Assembly); + resourceMan = temp; + } + return resourceMan; + } + } + + /// <summary> + /// Overrides the current thread's CurrentUICulture property for all + /// resource lookups using this strongly typed resource class. + /// </summary> + [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)] + internal static global::System.Globalization.CultureInfo Culture { + get { + return resourceCulture; + } + set { + resourceCulture = value; + } + } + } +} diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/Resources.resx b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/Resources.resx new file mode 100644 index 0000000000..af7dbebbac --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/Resources.resx @@ -0,0 +1,117 @@ +<?xml version="1.0" encoding="utf-8"?> +<root> + <!-- + Microsoft ResX Schema + + Version 2.0 + + The primary goals of this format is to allow a simple XML format + that is mostly human readable. The generation and parsing of the + various data types are done through the TypeConverter classes + associated with the data types. + + Example: + + ... ado.net/XML headers & schema ... + <resheader name="resmimetype">text/microsoft-resx</resheader> + <resheader name="version">2.0</resheader> + <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader> + <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader> + <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data> + <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data> + <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64"> + <value>[base64 mime encoded serialized .NET Framework object]</value> + </data> + <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64"> + <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value> + <comment>This is a comment</comment> + </data> + + There are any number of "resheader" rows that contain simple + name/value pairs. + + Each data row contains a name, and value. The row also contains a + type or mimetype. Type corresponds to a .NET class that support + text/value conversion through the TypeConverter architecture. + Classes that don't support this are serialized and stored with the + mimetype set. + + The mimetype is used for serialized objects, and tells the + ResXResourceReader how to depersist the object. This is currently not + extensible. For a given mimetype the value must be set accordingly: + + Note - application/x-microsoft.net.object.binary.base64 is the format + that the ResXResourceWriter will generate, however the reader can + read any of the formats listed below. + + mimetype: application/x-microsoft.net.object.binary.base64 + value : The object must be serialized with + : System.Serialization.Formatters.Binary.BinaryFormatter + : and then encoded with base64 encoding. + + mimetype: application/x-microsoft.net.object.soap.base64 + value : The object must be serialized with + : System.Runtime.Serialization.Formatters.Soap.SoapFormatter + : and then encoded with base64 encoding. + + mimetype: application/x-microsoft.net.object.bytearray.base64 + value : The object must be serialized into a byte array + : using a System.ComponentModel.TypeConverter + : and then encoded with base64 encoding. + --> + <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata"> + <xsd:element name="root" msdata:IsDataSet="true"> + <xsd:complexType> + <xsd:choice maxOccurs="unbounded"> + <xsd:element name="metadata"> + <xsd:complexType> + <xsd:sequence> + <xsd:element name="value" type="xsd:string" minOccurs="0" /> + </xsd:sequence> + <xsd:attribute name="name" type="xsd:string" /> + <xsd:attribute name="type" type="xsd:string" /> + <xsd:attribute name="mimetype" type="xsd:string" /> + </xsd:complexType> + </xsd:element> + <xsd:element name="assembly"> + <xsd:complexType> + <xsd:attribute name="alias" type="xsd:string" /> + <xsd:attribute name="name" type="xsd:string" /> + </xsd:complexType> + </xsd:element> + <xsd:element name="data"> + <xsd:complexType> + <xsd:sequence> + <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" /> + <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" /> + </xsd:sequence> + <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" /> + <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" /> + <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" /> + </xsd:complexType> + </xsd:element> + <xsd:element name="resheader"> + <xsd:complexType> + <xsd:sequence> + <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" /> + </xsd:sequence> + <xsd:attribute name="name" type="xsd:string" use="required" /> + </xsd:complexType> + </xsd:element> + </xsd:choice> + </xsd:complexType> + </xsd:element> + </xsd:schema> + <resheader name="resmimetype"> + <value>text/microsoft-resx</value> + </resheader> + <resheader name="version"> + <value>2.0</value> + </resheader> + <resheader name="reader"> + <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value> + </resheader> + <resheader name="writer"> + <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value> + </resheader> +</root>
\ No newline at end of file diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/Settings.Designer.cs b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/Settings.Designer.cs new file mode 100644 index 0000000000..95fc3ad588 --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/Settings.Designer.cs @@ -0,0 +1,26 @@ +//------------------------------------------------------------------------------ +// <auto-generated> +// This code was generated by a tool. +// Runtime Version:4.0.30319.239 +// +// Changes to this file may cause incorrect behavior and will be lost if +// the code is regenerated. +// </auto-generated> +//------------------------------------------------------------------------------ + +namespace TemperatureLoggerHostApp.Properties { + + + [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()] + [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "10.0.0.0")] + internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase { + + private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings()))); + + public static Settings Default { + get { + return defaultInstance; + } + } + } +} diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/Settings.settings b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/Settings.settings new file mode 100644 index 0000000000..39645652af --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/Properties/Settings.settings @@ -0,0 +1,7 @@ +<?xml version='1.0' encoding='utf-8'?> +<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)"> + <Profiles> + <Profile Name="(Default)" /> + </Profiles> + <Settings /> +</SettingsFile> diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/README.txt b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/README.txt new file mode 100644 index 0000000000..ab6b9a83a7 --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/README.txt @@ -0,0 +1,24 @@ +http://en.sourceforge.jp/projects/sfnet_libhidnet/ + +This library has been tested on Windows Vista 32bit, Windows Vista 64bit, +Windows XP 32bit and Debian (Lenny) AMD64 but should work on any version of +Windows that can run the .NET framework 2.0 and any other operating system +that has both hiddev and Mono. + +Any additions must be tested and work on Windows and Linux, on both 32 and +64 bit. Windows 64 bit testing is particularly important as it is often +neglected. + + +Hid.Linux.dll was compiled under Linux with Mono (mcs) and uses no generics. + +Hid.Win32.dll and Hid.Net.dll were compiled under Windows with the .NET +Framework v2.0.50727 but are also tested to compile with Mono (gmcs). + + +A good starting point when using this library is Hid.DeviceFactory's Enumerate +methods. + +LogitechMX5000.cs is a simple example of how the library can be used. Other +examples on common devices are welcomed. + diff --git a/lib/lufa/Projects/TempDataLogger/TempLogHostApp/TempLoggerHostApp.csproj b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/TempLoggerHostApp.csproj new file mode 100644 index 0000000000..8517d6f42a --- /dev/null +++ b/lib/lufa/Projects/TempDataLogger/TempLogHostApp/TempLoggerHostApp.csproj @@ -0,0 +1,99 @@ +<?xml version="1.0" encoding="utf-8"?> +<Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> + <PropertyGroup> + <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration> + <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform> + <ProductVersion>9.0.21022</ProductVersion> + <SchemaVersion>2.0</SchemaVersion> + <ProjectGuid>{A2D66069-8CF9-4104-828C-49A73D7DB5D1}</ProjectGuid> + <OutputType>WinExe</OutputType> + <AppDesignerFolder>Properties</AppDesignerFolder> + <RootNamespace>TemperatureLoggerHostApp</RootNamespace> + <AssemblyName>TemperatureLoggerHostApp</AssemblyName> + <TargetFrameworkVersion>v3.5</TargetFrameworkVersion> + <FileAlignment>512</FileAlignment> + <FileUpgradeFlags> + </FileUpgradeFlags> + <OldToolsVersion>3.5</OldToolsVersion> + <UpgradeBackupLocation /> + </PropertyGroup> + <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' "> + <DebugSymbols>true</DebugSymbols> + <DebugType>full</DebugType> + <Optimize>false</Optimize> + <OutputPath>bin\Debug\</OutputPath> + <DefineConstants>DEBUG;TRACE</DefineConstants> + <ErrorReport>prompt</ErrorReport> + <WarningLevel>4</WarningLevel> + </PropertyGroup> + <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' "> + <DebugType>pdbonly</DebugType> + <Optimize>true</Optimize> + <OutputPath>bin\Release\</OutputPath> + <DefineConstants>TRACE</DefineConstants> + <ErrorReport>prompt</ErrorReport> + <WarningLevel>4</WarningLevel> + </PropertyGroup> + <ItemGroup> + <Reference Include="Hid.Net, Version=1.0.0.0, Culture=neutral, processorArchitecture=MSIL"> + <SpecificVersion>False</SpecificVersion> + <HintPath>.\Hid.Net.dll</HintPath> + </Reference> + <Reference Include="System" /> + <Reference Include="System.Core"> + <RequiredTargetFramework>3.5</RequiredTargetFramework> + </Reference> + <Reference Include="System.Xml.Linq"> + <RequiredTargetFramework>3.5</RequiredTargetFramework> + </Reference> + <Reference Include="System.Data.DataSetExtensions"> + <RequiredTargetFramework>3.5</RequiredTargetFramework> + </Reference> + <Reference Include="System.Data" /> + <Reference Include="System.Deployment" /> + <Reference Include="System.Drawing" /> + <Reference Include="System.Windows.Forms" /> + <Reference Include="System.Xml" /> + </ItemGroup> + <ItemGroup> + <Compile Include="DataLoggerSettings.cs"> + <SubType>Form</SubType> + </Compile> + <Compile Include="DataLoggerSettings.Designer.cs"> + <DependentUpon>DataLoggerSettings.cs</DependentUpon> + </Compile> + <Compile Include="Program.cs" /> + <Compile Include="Properties\AssemblyInfo.cs" /> + <EmbeddedResource Include="DataLoggerSettings.resx"> + <DependentUpon>DataLoggerSettings.cs</DependentUpon> + <SubType>Designer</SubType> + </EmbeddedResource> + <EmbeddedResource Include="Properties\Resources.resx"> + <Generator>ResXFileCodeGenerator</Generator> + <LastGenOutput>Resources.Designer.cs</LastGenOutput> + <SubType>Designer</SubType> + </EmbeddedResource> + <Compile Include="Properties\Resources.Designer.cs"> + <AutoGen>True</AutoGen> + <DependentUpon>Resources.resx</DependentUpon> + <DesignTime>True</DesignTime> + </Compile> + <None Include="Properties\Settings.settings"> + <Generator>SettingsSingleFileGenerator</Generator> + <LastGenOutput>Settings.Designer.cs</LastGenOutput> + </None> + <Compile Include="Properties\Settings.Designer.cs"> + <AutoGen>True</AutoGen> + <DependentUpon>Settings.settings</DependentUpon> + <DesignTimeSharedInput>True</DesignTimeSharedInput> + </Compile> + </ItemGroup> + <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" /> + <!-- To modify your build process, add your task inside one of the targets below and uncomment it. + Other similar extension points exist, see Microsoft.Common.targets. + <Target Name="BeforeBuild"> + </Target> + <Target Name="AfterBuild"> + </Target> + --> +</Project>
\ No newline at end of file |