diff options
Diffstat (limited to 'lib/lufa/LUFA/Drivers/USB/Core')
79 files changed, 20553 insertions, 0 deletions
diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c new file mode 100644 index 0000000000..f972b0bcc5 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c @@ -0,0 +1,57 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_AVR8) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "../Device.h" + +void USB_Device_SendRemoteWakeup(void) +{ + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + { + USB_PLL_On(); + while (!(USB_PLL_IsReady())); + } + + USB_CLK_Unfreeze(); + + UDCON |= (1 << RMWKUP); + while (UDCON & (1 << RMWKUP)); +} + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h new file mode 100644 index 0000000000..69f9be593e --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h @@ -0,0 +1,269 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Device definitions for the AVR8 microcontrollers. + * \copydetails Group_Device_AVR8 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_Device + * \defgroup Group_Device_AVR8 Device Management (AVR8) + * \brief USB Device definitions for the AVR8 microcontrollers. + * + * Architecture specific USB Device definitions for the Atmel 8-bit AVR microcontrollers. + * + * @{ + */ + +#ifndef __USBDEVICE_AVR8_H__ +#define __USBDEVICE_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBController.h" + #include "../StdDescriptors.h" + #include "../USBInterrupt.h" + #include "../Endpoint.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + #if (defined(USE_RAM_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS)) + #error USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive. + #endif + + #if (defined(USE_FLASH_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS)) + #error USE_FLASH_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive. + #endif + + #if (defined(USE_FLASH_DESCRIPTORS) && defined(USE_RAM_DESCRIPTORS)) + #error USE_FLASH_DESCRIPTORS and USE_RAM_DESCRIPTORS are mutually exclusive. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name USB Device Mode Option Masks */ + //@{ + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__) + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in low speed (1.5Mb/s) mode. + * + * \note Low Speed mode is not available on all USB AVR models. + * \n + * + * \note Restrictions apply on the number, size and type of endpoints which can be used + * when running in low speed mode - please refer to the USB 2.0 specification. + */ + #define USB_DEVICE_OPT_LOWSPEED (1 << 0) + #endif + + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in full speed (12Mb/s) mode. + */ + #define USB_DEVICE_OPT_FULLSPEED (0 << 0) + //@} + + #if (!defined(NO_INTERNAL_SERIAL) && \ + (defined(USB_SERIES_7_AVR) || defined(USB_SERIES_6_AVR) || \ + defined(USB_SERIES_4_AVR) || defined(USB_SERIES_2_AVR) || \ + defined(__DOXYGEN__))) + /** String descriptor index for the device's unique serial number string descriptor within the device. + * This unique serial number is used by the host to associate resources to the device (such as drivers or COM port + * number allocations) to a device regardless of the port it is plugged in to on the host. Some microcontrollers contain + * a unique serial number internally, and setting the device descriptors serial number string index to this value + * will cause it to use the internal serial number. + * + * On unsupported devices, this will evaluate to \ref NO_DESCRIPTOR and so will force the host to create a pseudo-serial + * number for the device. + */ + #define USE_INTERNAL_SERIAL 0xDC + + /** Length of the device's unique internal serial number, in bits, if present on the selected microcontroller + * model. + */ + #define INTERNAL_SERIAL_LENGTH_BITS 80 + + /** Start address of the internal serial number, in the appropriate address space, if present on the selected microcontroller + * model. + */ + #define INTERNAL_SERIAL_START_ADDRESS 0x0E + #else + #define USE_INTERNAL_SERIAL NO_DESCRIPTOR + + #define INTERNAL_SERIAL_LENGTH_BITS 0 + #define INTERNAL_SERIAL_START_ADDRESS 0 + #endif + + /* Function Prototypes: */ + /** Sends a Remote Wakeup request to the host. This signals to the host that the device should + * be taken out of suspended mode, and communications should resume. + * + * Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the + * host computer when the host has suspended all USB devices to enter a low power state. + * + * \attention This function should only be used if the device has indicated to the host that it + * supports the Remote Wakeup feature in the device descriptors, and should only be + * issued if the host is currently allowing remote wakeup events from the device (i.e., + * the \ref USB_Device_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP + * compile time option is used, this function is unavailable. + * \n\n + * + * \attention The USB clock must be running for this function to operate. If the stack is initialized with + * the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running + * before attempting to call this function. + * + * \see \ref Group_StdDescriptors for more information on the RMWAKEUP feature and device descriptors. + */ + void USB_Device_SendRemoteWakeup(void); + + /* Inline Functions: */ + /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host) + * the frame number is incremented by one. + * + * \return Current USB frame number from the USB controller. + */ + static inline uint16_t USB_Device_GetFrameNumber(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline uint16_t USB_Device_GetFrameNumber(void) + { + return UDFNUM; + } + + #if !defined(NO_SOF_EVENTS) + /** Enables the device mode Start Of Frame events. When enabled, this causes the + * \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, + * at the start of each USB frame when enumerated in device mode. + * + * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_EnableSOFEvents(void) + { + USB_INT_Enable(USB_INT_SOFI); + } + + /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the + * \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode. + * + * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_DisableSOFEvents(void) + { + USB_INT_Disable(USB_INT_SOFI); + } + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Inline Functions: */ + #if defined(USB_DEVICE_OPT_LOWSPEED) + static inline void USB_Device_SetLowSpeed(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetLowSpeed(void) + { + UDCON |= (1 << LSM); + } + + static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetFullSpeed(void) + { + UDCON &= ~(1 << LSM); + } + #endif + + static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetDeviceAddress(const uint8_t Address) + { + UDADDR = (UDADDR & (1 << ADDEN)) | (Address & 0x7F); + } + + static inline void USB_Device_EnableDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void USB_Device_EnableDeviceAddress(const uint8_t Address) + { + (void)Address; + + UDADDR |= (1 << ADDEN); + } + + static inline bool USB_Device_IsAddressSet(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline bool USB_Device_IsAddressSet(void) + { + return (UDADDR & (1 << ADDEN)); + } + + #if (USE_INTERNAL_SERIAL != NO_DESCRIPTOR) + static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString) ATTR_NON_NULL_PTR_ARG(1); + static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString) + { + uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask(); + GlobalInterruptDisable(); + + uint8_t SigReadAddress = INTERNAL_SERIAL_START_ADDRESS; + + for (uint8_t SerialCharNum = 0; SerialCharNum < (INTERNAL_SERIAL_LENGTH_BITS / 4); SerialCharNum++) + { + uint8_t SerialByte = boot_signature_byte_get(SigReadAddress); + + if (SerialCharNum & 0x01) + { + SerialByte >>= 4; + SigReadAddress++; + } + + SerialByte &= 0x0F; + + UnicodeString[SerialCharNum] = cpu_to_le16((SerialByte >= 10) ? + (('A' - 10) + SerialByte) : ('0' + SerialByte)); + } + + SetGlobalInterruptMask(CurrentGlobalInt); + } + #endif + + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c new file mode 100644 index 0000000000..8ffae15e19 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c @@ -0,0 +1,275 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_AVR8) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "EndpointStream_AVR8.h" + +#if !defined(CONTROL_ONLY_DEVICE) +uint8_t Endpoint_Discard_Stream(uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t ErrorCode; + uint16_t BytesInTransfer = 0; + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + Length -= *BytesProcessed; + + while (Length) + { + if (!(Endpoint_IsReadWriteAllowed())) + { + Endpoint_ClearOUT(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return ENDPOINT_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + } + else + { + Endpoint_Discard_8(); + + Length--; + BytesInTransfer++; + } + } + + return ENDPOINT_RWSTREAM_NoError; +} + +uint8_t Endpoint_Null_Stream(uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t ErrorCode; + uint16_t BytesInTransfer = 0; + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + Length -= *BytesProcessed; + + while (Length) + { + if (!(Endpoint_IsReadWriteAllowed())) + { + Endpoint_ClearIN(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return ENDPOINT_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + } + else + { + Endpoint_Write_8(0); + + Length--; + BytesInTransfer++; + } + } + + return ENDPOINT_RWSTREAM_NoError; +} + +/* The following abuses the C preprocessor in order to copy-paste common code with slight alterations, + * so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */ + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_LE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_RW.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_BE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_RW.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_LE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_RW.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_BE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_RW.c" + +#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_LE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_BE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" +#endif + +#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_LE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_BE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_LE + #define TEMPLATE_BUFFER_TYPE void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_BE + #define TEMPLATE_BUFFER_TYPE void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_RW.c" +#endif + +#endif + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_LE +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_Control_W.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_BE +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_Control_W.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_LE +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_Control_R.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_BE +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_Control_R.c" + +#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_LE + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_Control_W.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_BE + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_Control_W.c" +#endif + +#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_LE + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_Control_W.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_BE + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_Control_W.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_LE + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_Control_R.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_BE + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_Control_R.c" +#endif + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h new file mode 100644 index 0000000000..80e78df1b4 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h @@ -0,0 +1,658 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Endpoint data stream transmission and reception management for the AVR8 microcontrollers. + * \copydetails Group_EndpointStreamRW_AVR8 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_EndpointStreamRW + * \defgroup Group_EndpointStreamRW_AVR8 Read/Write of Multi-Byte Streams (AVR8) + * \brief Endpoint data stream transmission and reception management for the Atmel AVR8 architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing of data streams from + * and to endpoints. + * + * @{ + */ + +#ifndef __ENDPOINT_STREAM_AVR8_H__ +#define __ENDPOINT_STREAM_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBMode.h" + #include "../USBTask.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Function Prototypes: */ + /** \name Stream functions for null data */ + //@{ + + /** Reads and discards the given number of bytes from the currently selected endpoint's bank, + * discarding fully read packets from the host as needed. The last packet is not automatically + * discarded once the remaining bytes has been read; the user is responsible for manually + * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes empty while there is still data to process (and after the current + * packet has been acknowledged) the BytesProcessed location will be updated with the total number + * of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Discard_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Discard_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Length Number of bytes to discard via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Discard_Stream(uint16_t Length, + uint16_t* const BytesProcessed); + + /** Writes a given number of zeroed bytes to the currently selected endpoint's bank, sending + * full packets to the host as needed. The last packet is not automatically sent once the + * remaining bytes have been written; the user is responsible for manually sending the last + * packet to the host via the \ref Endpoint_ClearIN() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes full while there is still data to process (and after the current + * packet transmission has been initiated) the BytesProcessed location will be updated with the + * total number of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Null_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Null_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Length Number of zero bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Null_Stream(uint16_t Length, + uint16_t* const BytesProcessed); + + //@} + + /** \name Stream functions for RAM source/destination data */ + //@{ + + /** Writes the given number of bytes to the endpoint from the given buffer in little endian, + * sending full packets to the host as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Endpoint_ClearIN() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes full while there is still data to process (and after the current + * packet transmission has been initiated) the BytesProcessed location will be updated with the + * total number of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream), + * NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream), + * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Stream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the endpoint from the given buffer in big endian, + * sending full packets to the host as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Endpoint_ClearIN() macro. + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Stream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the endpoint from the given buffer in little endian, + * discarding fully read packets from the host as needed. The last packet is not automatically + * discarded once the remaining bytes has been read; the user is responsible for manually + * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes empty while there is still data to process (and after the current + * packet has been acknowledged) the BytesProcessed location will be updated with the total number + * of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream), + * NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream), + * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Stream_LE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the endpoint from the given buffer in big endian, + * discarding fully read packets from the host as needed. The last packet is not automatically + * discarded once the remaining bytes has been read; the user is responsible for manually + * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Stream_BE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian, + * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared + * in both failure and success states; the user is responsible for manually clearing the status OUT packet + * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_Stream_LE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian, + * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared + * in both failure and success states; the user is responsible for manually clearing the status OUT packet + * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_Stream_BE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian, + * discarding fully read packets from the host as needed. The device IN acknowledgement is not + * automatically sent after success or failure states; the user is responsible for manually sending the + * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_Stream_LE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian, + * discarding fully read packets from the host as needed. The device IN acknowledgement is not + * automatically sent after success or failure states; the user is responsible for manually sending the + * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /** \name Stream functions for EEPROM source/destination data */ + //@{ + + /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_EStream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_EStream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer destination version of \ref Endpoint_Read_Stream_LE(). + * + * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_EStream_LE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer destination version of \ref Endpoint_Read_Stream_BE(). + * + * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_EStream_BE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_EStream_LE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE(). + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_EStream_BE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE(). + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_EStream_LE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE(). + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_EStream_BE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /** \name Stream functions for PROGMEM source/destination data */ + //@{ + + /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_PStream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** FLASH buffer source version of \ref Endpoint_Write_Stream_BE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_PStream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_PStream_LE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_PStream_BE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c new file mode 100644 index 0000000000..92cf8360de --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c @@ -0,0 +1,201 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_AVR8) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "../Endpoint.h" + +#if !defined(FIXED_CONTROL_ENDPOINT_SIZE) +uint8_t USB_Device_ControlEndpointSize = ENDPOINT_CONTROLEP_DEFAULT_SIZE; +#endif + +bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Endpoint_ConfigureEndpoint(Table[i].Address, Table[i].Type, Table[i].Size, Table[i].Banks))) + return false; + } + + return true; +} + +bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number, + const uint8_t UECFG0XData, + const uint8_t UECFG1XData) +{ +#if defined(CONTROL_ONLY_DEVICE) || defined(ORDERED_EP_CONFIG) + Endpoint_SelectEndpoint(Number); + Endpoint_EnableEndpoint(); + + UECFG1X = 0; + UECFG0X = UECFG0XData; + UECFG1X = UECFG1XData; + + return Endpoint_IsConfigured(); +#else + for (uint8_t EPNum = Number; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++) + { + uint8_t UECFG0XTemp; + uint8_t UECFG1XTemp; + uint8_t UEIENXTemp; + + Endpoint_SelectEndpoint(EPNum); + + if (EPNum == Number) + { + UECFG0XTemp = UECFG0XData; + UECFG1XTemp = UECFG1XData; + UEIENXTemp = 0; + } + else + { + UECFG0XTemp = UECFG0X; + UECFG1XTemp = UECFG1X; + UEIENXTemp = UEIENX; + } + + if (!(UECFG1XTemp & (1 << ALLOC))) + continue; + + Endpoint_DisableEndpoint(); + UECFG1X &= ~(1 << ALLOC); + + Endpoint_EnableEndpoint(); + UECFG0X = UECFG0XTemp; + UECFG1X = UECFG1XTemp; + UEIENX = UEIENXTemp; + + if (!(Endpoint_IsConfigured())) + return false; + } + + Endpoint_SelectEndpoint(Number); + return true; +#endif +} + +void Endpoint_ClearEndpoints(void) +{ + UEINT = 0; + + for (uint8_t EPNum = 0; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++) + { + Endpoint_SelectEndpoint(EPNum); + UEIENX = 0; + UEINTX = 0; + UECFG1X = 0; + Endpoint_DisableEndpoint(); + } +} + +void Endpoint_ClearStatusStage(void) +{ + if (USB_ControlRequest.bmRequestType & REQDIR_DEVICETOHOST) + { + while (!(Endpoint_IsOUTReceived())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + + Endpoint_ClearOUT(); + } + else + { + while (!(Endpoint_IsINReady())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + + Endpoint_ClearIN(); + } +} + +#if !defined(CONTROL_ONLY_DEVICE) +uint8_t Endpoint_WaitUntilReady(void) +{ + #if (USB_STREAM_TIMEOUT_MS < 0xFF) + uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #else + uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #endif + + uint16_t PreviousFrameNumber = USB_Device_GetFrameNumber(); + + for (;;) + { + if (Endpoint_GetEndpointDirection() == ENDPOINT_DIR_IN) + { + if (Endpoint_IsINReady()) + return ENDPOINT_READYWAIT_NoError; + } + else + { + if (Endpoint_IsOUTReceived()) + return ENDPOINT_READYWAIT_NoError; + } + + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_READYWAIT_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_READYWAIT_BusSuspended; + else if (Endpoint_IsStalled()) + return ENDPOINT_READYWAIT_EndpointStalled; + + uint16_t CurrentFrameNumber = USB_Device_GetFrameNumber(); + + if (CurrentFrameNumber != PreviousFrameNumber) + { + PreviousFrameNumber = CurrentFrameNumber; + + if (!(TimeoutMSRem--)) + return ENDPOINT_READYWAIT_Timeout; + } + } +} +#endif + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h new file mode 100644 index 0000000000..6d8375230e --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h @@ -0,0 +1,819 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Endpoint definitions for the AVR8 microcontrollers. + * \copydetails Group_EndpointManagement_AVR8 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_EndpointRW + * \defgroup Group_EndpointRW_AVR8 Endpoint Data Reading and Writing (AVR8) + * \brief Endpoint data read/write definitions for the Atmel AVR8 architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing from and to endpoints. + */ + +/** \ingroup Group_EndpointPrimitiveRW + * \defgroup Group_EndpointPrimitiveRW_AVR8 Read/Write of Primitive Data Types (AVR8) + * \brief Endpoint primitive read/write definitions for the Atmel AVR8 architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing of primitive data types + * from and to endpoints. + */ + +/** \ingroup Group_EndpointPacketManagement + * \defgroup Group_EndpointPacketManagement_AVR8 Endpoint Packet Management (AVR8) + * \brief Endpoint packet management definitions for the Atmel AVR8 architecture. + * + * Functions, macros, variables, enums and types related to packet management of endpoints. + */ + +/** \ingroup Group_EndpointManagement + * \defgroup Group_EndpointManagement_AVR8 Endpoint Management (AVR8) + * \brief Endpoint management definitions for the Atmel AVR8 architecture. + * + * Functions, macros and enums related to endpoint management when in USB Device mode. This + * module contains the endpoint management macros, as well as endpoint interrupt and data + * send/receive functions for various data types. + * + * @{ + */ + +#ifndef __ENDPOINT_AVR8_H__ +#define __ENDPOINT_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBTask.h" + #include "../USBInterrupt.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Inline Functions: */ + static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST + ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) + { + uint8_t MaskVal = 0; + uint16_t CheckBytes = 8; + + while (CheckBytes < Bytes) + { + MaskVal++; + CheckBytes <<= 1; + } + + return (MaskVal << EPSIZE0); + } + + /* Function Prototypes: */ + void Endpoint_ClearEndpoints(void); + bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number, + const uint8_t UECFG0XData, + const uint8_t UECFG1XData); + + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) + /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size + * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined. + */ + #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8 + #endif + + #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__) + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__) + /** Total number of endpoints (including the default control endpoint at address 0) which may + * be used in the device. Different USB AVR models support different amounts of endpoints, + * this value reflects the maximum number of endpoints for the currently selected AVR model. + */ + #define ENDPOINT_TOTAL_ENDPOINTS 7 + #else + #define ENDPOINT_TOTAL_ENDPOINTS 5 + #endif + #else + #define ENDPOINT_TOTAL_ENDPOINTS 1 + #endif + + /* Enums: */ + /** Enum for the possible error return codes of the \ref Endpoint_WaitUntilReady() function. + * + * \ingroup Group_EndpointRW_AVR8 + */ + enum Endpoint_WaitUntilReady_ErrorCodes_t + { + ENDPOINT_READYWAIT_NoError = 0, /**< Endpoint is ready for next packet, no error. */ + ENDPOINT_READYWAIT_EndpointStalled = 1, /**< The endpoint was stalled during the stream + * transfer by the host or device. + */ + ENDPOINT_READYWAIT_DeviceDisconnected = 2, /**< Device was disconnected from the host while + * waiting for the endpoint to become ready. + */ + ENDPOINT_READYWAIT_BusSuspended = 3, /**< The USB bus has been suspended by the host and + * no USB endpoint traffic can occur until the bus + * has resumed. + */ + ENDPOINT_READYWAIT_Timeout = 4, /**< The host failed to accept or send the next packet + * within the software timeout period set by the + * \ref USB_STREAM_TIMEOUT_MS macro. + */ + }; + + /* Inline Functions: */ + /** Configures the specified endpoint address with the given endpoint type, bank size and number of hardware + * banks. Once configured, the endpoint may be read from or written to, depending on its direction. + * + * \param[in] Address Endpoint address to configure. + * + * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types + * are available on Low Speed USB devices - refer to the USB 2.0 specification. + * + * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted + * to the USB host, or after they have been received from the USB host (depending on + * the endpoint's data direction). The bank size must indicate the maximum packet size + * that the endpoint can handle. + * + * \param[in] Banks Number of banks to use for the endpoint being configured. + * + * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints <b>must</b> be configured in + * ascending order, or bank corruption will occur. + * + * \note Different endpoints may have different maximum packet sizes based on the endpoint's index - please + * refer to the chosen microcontroller model's datasheet to determine the maximum bank size for each endpoint. + * \n\n + * + * \note The default control endpoint should not be manually configured by the user application, as + * it is automatically configured by the library internally. + * \n\n + * + * \note This routine will automatically select the specified endpoint upon success. Upon failure, the endpoint + * which failed to reconfigure correctly will be selected. + * + * \return Boolean \c true if the configuration succeeded, \c false otherwise. + */ + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, + const uint8_t Type, + const uint16_t Size, + const uint8_t Banks) ATTR_ALWAYS_INLINE; + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, + const uint8_t Type, + const uint16_t Size, + const uint8_t Banks) + { + uint8_t Number = (Address & ENDPOINT_EPNUM_MASK); + + if (Number >= ENDPOINT_TOTAL_ENDPOINTS) + return false; + + return Endpoint_ConfigureEndpoint_Prv(Number, + ((Type << EPTYPE0) | ((Address & ENDPOINT_DIR_IN) ? (1 << EPDIR) : 0)), + ((1 << ALLOC) | ((Banks > 1) ? (1 << EPBK0) : 0) | Endpoint_BytesToEPSizeMask(Size))); + } + + /** Indicates the number of bytes currently stored in the current endpoint's selected bank. + * + * \ingroup Group_EndpointRW_AVR8 + * + * \return Total number of bytes in the currently selected Endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_BytesInEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_BytesInEndpoint(void) + { + #if (defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + return UEBCX; + #elif defined(USB_SERIES_4_AVR) + return (((uint16_t)UEBCHX << 8) | UEBCLX); + #elif defined(USB_SERIES_2_AVR) + return UEBCLX; + #endif + } + + /** Determines the currently selected endpoint's direction. + * + * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask. + */ + static inline uint8_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetEndpointDirection(void) + { + return (UECFG0X & (1 << EPDIR)) ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT; + } + + /** Get the endpoint address of the currently selected endpoint. This is typically used to save + * the currently selected endpoint so that it can be restored after another endpoint has been + * manipulated. + * + * \return Index of the currently selected endpoint. + */ + static inline uint8_t Endpoint_GetCurrentEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetCurrentEndpoint(void) + { + #if !defined(CONTROL_ONLY_DEVICE) + return ((UENUM & ENDPOINT_EPNUM_MASK) | Endpoint_GetEndpointDirection()); + #else + return ENDPOINT_CONTROLEP; + #endif + } + + /** Selects the given endpoint address. + * + * Any endpoint operations which do not require the endpoint address to be indicated will operate on + * the currently selected endpoint. + * + * \param[in] Address Endpoint address to select. + */ + static inline void Endpoint_SelectEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_SelectEndpoint(const uint8_t Address) + { + #if !defined(CONTROL_ONLY_DEVICE) + UENUM = (Address & ENDPOINT_EPNUM_MASK); + #endif + } + + /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's + * data In and Out pointers to the bank's contents. + * + * \param[in] Address Endpoint address whose FIFO buffers are to be reset. + */ + static inline void Endpoint_ResetEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetEndpoint(const uint8_t Address) + { + UERST = (1 << (Address & ENDPOINT_EPNUM_MASK)); + UERST = 0; + } + + /** Enables the currently selected endpoint so that data can be sent and received through it to + * and from a host. + * + * \note Endpoints must first be configured properly via \ref Endpoint_ConfigureEndpoint(). + */ + static inline void Endpoint_EnableEndpoint(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_EnableEndpoint(void) + { + UECONX |= (1 << EPEN); + } + + /** Disables the currently selected endpoint so that data cannot be sent and received through it + * to and from a host. + */ + static inline void Endpoint_DisableEndpoint(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_DisableEndpoint(void) + { + UECONX &= ~(1 << EPEN); + } + + /** Determines if the currently selected endpoint is enabled, but not necessarily configured. + * + * \return Boolean \c true if the currently selected endpoint is enabled, \c false otherwise. + */ + static inline bool Endpoint_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsEnabled(void) + { + return ((UECONX & (1 << EPEN)) ? true : false); + } + + /** Retrieves the number of busy banks in the currently selected endpoint, which have been queued for + * transmission via the \ref Endpoint_ClearIN() command, or are awaiting acknowledgment via the + * \ref Endpoint_ClearOUT() command. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \return Total number of busy banks in the selected endpoint. + */ + static inline uint8_t Endpoint_GetBusyBanks(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline uint8_t Endpoint_GetBusyBanks(void) + { + return (UESTA0X & (0x03 << NBUSYBK0)); + } + + /** Aborts all pending IN transactions on the currently selected endpoint, once the bank + * has been queued for transmission to the host via \ref Endpoint_ClearIN(). This function + * will terminate all queued transactions, resetting the endpoint banks ready for a new + * packet. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + */ + static inline void Endpoint_AbortPendingIN(void) + { + while (Endpoint_GetBusyBanks() != 0) + { + UEINTX |= (1 << RXOUTI); + while (UEINTX & (1 << RXOUTI)); + } + } + + /** Determines if the currently selected endpoint may be read from (if data is waiting in the endpoint + * bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an IN + * direction). This function will return false if an error has occurred in the endpoint, if the endpoint + * is an OUT direction and no packet (or an empty packet) has been received, or if the endpoint is an IN + * direction and the endpoint bank is full. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \return Boolean \c true if the currently selected endpoint may be read from or written to, depending + * on its direction. + */ + static inline bool Endpoint_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsReadWriteAllowed(void) + { + return ((UEINTX & (1 << RWAL)) ? true : false); + } + + /** Determines if the currently selected endpoint is configured. + * + * \return Boolean \c true if the currently selected endpoint has been configured, \c false otherwise. + */ + static inline bool Endpoint_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsConfigured(void) + { + return ((UESTA0X & (1 << CFGOK)) ? true : false); + } + + /** Returns a mask indicating which INTERRUPT type endpoints have interrupted - i.e. their + * interrupt duration has elapsed. Which endpoints have interrupted can be determined by + * masking the return value against <tt>(1 << <i>{Endpoint Number}</i>)</tt>. + * + * \return Mask whose bits indicate which endpoints have interrupted. + */ + static inline uint8_t Endpoint_GetEndpointInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetEndpointInterrupts(void) + { + return UEINT; + } + + /** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type + * endpoints). + * + * \param[in] Address Address of the endpoint whose interrupt flag should be tested. + * + * \return Boolean \c true if the specified endpoint has interrupted, \c false otherwise. + */ + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) + { + return ((Endpoint_GetEndpointInterrupts() & (1 << (Address & ENDPOINT_EPNUM_MASK))) ? true : false); + } + + /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \return Boolean \c true if the current endpoint is ready for an IN packet, \c false otherwise. + */ + static inline bool Endpoint_IsINReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsINReady(void) + { + return ((UEINTX & (1 << TXINI)) ? true : false); + } + + /** Determines if the selected OUT endpoint has received new packet from the host. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \return Boolean \c true if current endpoint is has received an OUT packet, \c false otherwise. + */ + static inline bool Endpoint_IsOUTReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsOUTReceived(void) + { + return ((UEINTX & (1 << RXOUTI)) ? true : false); + } + + /** Determines if the current CONTROL type endpoint has received a SETUP packet. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \return Boolean \c true if the selected endpoint has received a SETUP packet, \c false otherwise. + */ + static inline bool Endpoint_IsSETUPReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsSETUPReceived(void) + { + return ((UEINTX & (1 << RXSTPI)) ? true : false); + } + + /** Clears a received SETUP packet on the currently selected CONTROL type endpoint, freeing up the + * endpoint for the next packet. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \note This is not applicable for non CONTROL type endpoints. + */ + static inline void Endpoint_ClearSETUP(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearSETUP(void) + { + UEINTX &= ~(1 << RXSTPI); + } + + /** Sends an IN packet to the host on the currently selected endpoint, freeing up the endpoint for the + * next packet and switching to the alternative endpoint bank if double banked. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + */ + static inline void Endpoint_ClearIN(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearIN(void) + { + #if !defined(CONTROL_ONLY_DEVICE) + UEINTX &= ~((1 << TXINI) | (1 << FIFOCON)); + #else + UEINTX &= ~(1 << TXINI); + #endif + } + + /** Acknowledges an OUT packet to the host on the currently selected endpoint, freeing up the endpoint + * for the next packet and switching to the alternative endpoint bank if double banked. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + */ + static inline void Endpoint_ClearOUT(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearOUT(void) + { + #if !defined(CONTROL_ONLY_DEVICE) + UEINTX &= ~((1 << RXOUTI) | (1 << FIFOCON)); + #else + UEINTX &= ~(1 << RXOUTI); + #endif + } + + /** Stalls the current endpoint, indicating to the host that a logical problem occurred with the + * indicated endpoint and that the current transfer sequence should be aborted. This provides a + * way for devices to indicate invalid commands to the host so that the current transfer can be + * aborted and the host can begin its own recovery sequence. + * + * The currently selected endpoint remains stalled until either the \ref Endpoint_ClearStall() macro + * is called, or the host issues a CLEAR FEATURE request to the device for the currently selected + * endpoint. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + */ + static inline void Endpoint_StallTransaction(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_StallTransaction(void) + { + UECONX |= (1 << STALLRQ); + } + + /** Clears the STALL condition on the currently selected endpoint. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + */ + static inline void Endpoint_ClearStall(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearStall(void) + { + UECONX |= (1 << STALLRQC); + } + + /** Determines if the currently selected endpoint is stalled, \c false otherwise. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \return Boolean \c true if the currently selected endpoint is stalled, \c false otherwise. + */ + static inline bool Endpoint_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsStalled(void) + { + return ((UECONX & (1 << STALLRQ)) ? true : false); + } + + /** Resets the data toggle of the currently selected endpoint. */ + static inline void Endpoint_ResetDataToggle(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetDataToggle(void) + { + UECONX |= (1 << RSTDT); + } + + /** Sets the direction of the currently selected endpoint. + * + * \param[in] DirectionMask New endpoint direction, as a \c ENDPOINT_DIR_* mask. + */ + static inline void Endpoint_SetEndpointDirection(const uint8_t DirectionMask) ATTR_ALWAYS_INLINE; + static inline void Endpoint_SetEndpointDirection(const uint8_t DirectionMask) + { + UECFG0X = ((UECFG0X & ~(1 << EPDIR)) | (DirectionMask ? (1 << EPDIR) : 0)); + } + + /** Reads one byte from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \return Next byte in the currently selected endpoint's FIFO buffer. + */ + static inline uint8_t Endpoint_Read_8(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_Read_8(void) + { + return UEDATX; + } + + /** Writes one byte to the currently selected endpoint's bank, for IN direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \param[in] Data Data to write into the the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_8(const uint8_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_8(const uint8_t Data) + { + UEDATX = Data; + } + + /** Discards one byte from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + */ + static inline void Endpoint_Discard_8(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_8(void) + { + uint8_t Dummy; + + Dummy = UEDATX; + + (void)Dummy; + } + + /** Reads two bytes from the currently selected endpoint's bank in little endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \return Next two bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_Read_16_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_Read_16_LE(void) + { + union + { + uint16_t Value; + uint8_t Bytes[2]; + } Data; + + Data.Bytes[0] = UEDATX; + Data.Bytes[1] = UEDATX; + + return Data.Value; + } + + /** Reads two bytes from the currently selected endpoint's bank in big endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \return Next two bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_Read_16_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_Read_16_BE(void) + { + union + { + uint16_t Value; + uint8_t Bytes[2]; + } Data; + + Data.Bytes[1] = UEDATX; + Data.Bytes[0] = UEDATX; + + return Data.Value; + } + + /** Writes two bytes to the currently selected endpoint's bank in little endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_16_LE(const uint16_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_16_LE(const uint16_t Data) + { + UEDATX = (Data & 0xFF); + UEDATX = (Data >> 8); + } + + /** Writes two bytes to the currently selected endpoint's bank in big endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_16_BE(const uint16_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_16_BE(const uint16_t Data) + { + UEDATX = (Data >> 8); + UEDATX = (Data & 0xFF); + } + + /** Discards two bytes from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + */ + static inline void Endpoint_Discard_16(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_16(void) + { + uint8_t Dummy; + + Dummy = UEDATX; + Dummy = UEDATX; + + (void)Dummy; + } + + /** Reads four bytes from the currently selected endpoint's bank in little endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \return Next four bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint32_t Endpoint_Read_32_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_Read_32_LE(void) + { + union + { + uint32_t Value; + uint8_t Bytes[4]; + } Data; + + Data.Bytes[0] = UEDATX; + Data.Bytes[1] = UEDATX; + Data.Bytes[2] = UEDATX; + Data.Bytes[3] = UEDATX; + + return Data.Value; + } + + /** Reads four bytes from the currently selected endpoint's bank in big endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \return Next four bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint32_t Endpoint_Read_32_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_Read_32_BE(void) + { + union + { + uint32_t Value; + uint8_t Bytes[4]; + } Data; + + Data.Bytes[3] = UEDATX; + Data.Bytes[2] = UEDATX; + Data.Bytes[1] = UEDATX; + Data.Bytes[0] = UEDATX; + + return Data.Value; + } + + /** Writes four bytes to the currently selected endpoint's bank in little endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_32_LE(const uint32_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_32_LE(const uint32_t Data) + { + UEDATX = (Data & 0xFF); + UEDATX = (Data >> 8); + UEDATX = (Data >> 16); + UEDATX = (Data >> 24); + } + + /** Writes four bytes to the currently selected endpoint's bank in big endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_32_BE(const uint32_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_32_BE(const uint32_t Data) + { + UEDATX = (Data >> 24); + UEDATX = (Data >> 16); + UEDATX = (Data >> 8); + UEDATX = (Data & 0xFF); + } + + /** Discards four bytes from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + */ + static inline void Endpoint_Discard_32(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_32(void) + { + uint8_t Dummy; + + Dummy = UEDATX; + Dummy = UEDATX; + Dummy = UEDATX; + Dummy = UEDATX; + + (void)Dummy; + } + + /* External Variables: */ + /** Global indicating the maximum packet size of the default control endpoint located at address + * 0 in the device. This value is set to the value indicated in the device descriptor in the user + * project once the USB interface is initialized into device mode. + * + * If space is an issue, it is possible to fix this to a static value by defining the control + * endpoint size in the \c FIXED_CONTROL_ENDPOINT_SIZE token passed to the compiler in the makefile + * via the -D switch. When a fixed control endpoint size is used, the size is no longer dynamically + * read from the descriptors at runtime and instead fixed to the given value. When used, it is + * important that the descriptor control endpoint size value matches the size given as the + * \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token + * be used in the device descriptors to ensure this. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) + extern uint8_t USB_Device_ControlEndpointSize; + #else + #define USB_Device_ControlEndpointSize FIXED_CONTROL_ENDPOINT_SIZE + #endif + + /* Function Prototypes: */ + /** Configures a table of endpoint descriptions, in sequence. This function can be used to configure multiple + * endpoints at the same time. + * + * \note Endpoints with a zero address will be ignored, thus this function cannot be used to configure the + * control endpoint. + * + * \param[in] Table Pointer to a table of endpoint descriptions. + * \param[in] Entries Number of entries in the endpoint table to configure. + * + * \return Boolean \c true if all endpoints configured successfully, \c false otherwise. + */ + bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries); + + /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, + * with respect to the data direction. This is a convenience function which can be used to + * simplify user control request handling. + * + * \note This routine should not be called on non CONTROL type endpoints. + */ + void Endpoint_ClearStatusStage(void); + + /** Spin-loops until the currently selected non-control endpoint is ready for the next packet of data + * to be read or written to it. + * + * \note This routine should not be called on CONTROL type endpoints. + * + * \ingroup Group_EndpointRW_AVR8 + * + * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t Endpoint_WaitUntilReady(void); + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c new file mode 100644 index 0000000000..cbb7735e1c --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c @@ -0,0 +1,297 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_AVR8) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#define __INCLUDE_FROM_HOST_C +#include "../Host.h" + +void USB_Host_ProcessNextHostState(void) +{ + uint8_t ErrorCode = HOST_ENUMERROR_NoError; + uint8_t SubErrorCode = HOST_ENUMERROR_NoError; + + static uint16_t WaitMSRemaining; + static uint8_t PostWaitState; + + switch (USB_HostState) + { + case HOST_STATE_WaitForDevice: + if (WaitMSRemaining) + { + if ((SubErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful) + { + USB_HostState = PostWaitState; + ErrorCode = HOST_ENUMERROR_WaitStage; + break; + } + + if (!(--WaitMSRemaining)) + USB_HostState = PostWaitState; + } + + break; + case HOST_STATE_Powered: + WaitMSRemaining = HOST_DEVICE_SETTLE_DELAY_MS; + + USB_HostState = HOST_STATE_Powered_WaitForDeviceSettle; + break; + case HOST_STATE_Powered_WaitForDeviceSettle: + if (WaitMSRemaining--) + { + Delay_MS(1); + break; + } + else + { + USB_Host_VBUS_Manual_Off(); + + USB_OTGPAD_On(); + USB_Host_VBUS_Auto_Enable(); + USB_Host_VBUS_Auto_On(); + + #if defined(NO_AUTO_VBUS_MANAGEMENT) + USB_Host_VBUS_Manual_Enable(); + USB_Host_VBUS_Manual_On(); + #endif + + USB_HostState = HOST_STATE_Powered_WaitForConnect; + } + + break; + case HOST_STATE_Powered_WaitForConnect: + if (USB_INT_HasOccurred(USB_INT_DCONNI)) + { + USB_INT_Clear(USB_INT_DCONNI); + USB_INT_Clear(USB_INT_DDISCI); + + USB_INT_Clear(USB_INT_VBERRI); + USB_INT_Enable(USB_INT_VBERRI); + + USB_Host_ResumeBus(); + Pipe_ClearPipes(); + + HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Powered_DoReset); + } + + break; + case HOST_STATE_Powered_DoReset: + USB_Host_ResetDevice(); + + HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe); + break; + case HOST_STATE_Powered_ConfigPipe: + if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, PIPE_CONTROLPIPE_DEFAULT_SIZE, 1))) + { + ErrorCode = HOST_ENUMERROR_PipeConfigError; + SubErrorCode = 0; + break; + } + + USB_HostState = HOST_STATE_Default; + break; + case HOST_STATE_Default: + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_GetDescriptor, + .wValue = (DTYPE_Device << 8), + .wIndex = 0, + .wLength = 8, + }; + + uint8_t DataBuffer[8]; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + if ((SubErrorCode = USB_Host_SendControlRequest(DataBuffer)) != HOST_SENDCONTROL_Successful) + { + ErrorCode = HOST_ENUMERROR_ControlError; + break; + } + + USB_Host_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, Endpoint0Size)]; + + USB_Host_ResetDevice(); + + HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset); + break; + case HOST_STATE_Default_PostReset: + if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, USB_Host_ControlPipeSize, 1))) + { + ErrorCode = HOST_ENUMERROR_PipeConfigError; + SubErrorCode = 0; + break; + } + + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_SetAddress, + .wValue = USB_HOST_DEVICEADDRESS, + .wIndex = 0, + .wLength = 0, + }; + + if ((SubErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful) + { + ErrorCode = HOST_ENUMERROR_ControlError; + break; + } + + HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Default_PostAddressSet); + break; + case HOST_STATE_Default_PostAddressSet: + USB_Host_SetDeviceAddress(USB_HOST_DEVICEADDRESS); + + USB_HostState = HOST_STATE_Addressed; + + EVENT_USB_Host_DeviceEnumerationComplete(); + break; + + default: + break; + } + + if ((ErrorCode != HOST_ENUMERROR_NoError) && (USB_HostState != HOST_STATE_Unattached)) + { + EVENT_USB_Host_DeviceEnumerationFailed(ErrorCode, SubErrorCode); + + USB_Host_VBUS_Auto_Off(); + + EVENT_USB_Host_DeviceUnattached(); + + USB_ResetInterface(); + } +} + +uint8_t USB_Host_WaitMS(uint8_t MS) +{ + bool BusSuspended = USB_Host_IsBusSuspended(); + uint8_t ErrorCode = HOST_WAITERROR_Successful; + bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI); + + USB_INT_Disable(USB_INT_HSOFI); + USB_INT_Clear(USB_INT_HSOFI); + + USB_Host_ResumeBus(); + + while (MS) + { + if (USB_INT_HasOccurred(USB_INT_HSOFI)) + { + USB_INT_Clear(USB_INT_HSOFI); + MS--; + } + + if ((USB_HostState == HOST_STATE_Unattached) || (USB_CurrentMode != USB_MODE_Host)) + { + ErrorCode = HOST_WAITERROR_DeviceDisconnect; + + break; + } + + if (Pipe_IsError()) + { + Pipe_ClearError(); + ErrorCode = HOST_WAITERROR_PipeError; + + break; + } + + if (Pipe_IsStalled()) + { + Pipe_ClearStall(); + ErrorCode = HOST_WAITERROR_SetupStalled; + + break; + } + } + + if (BusSuspended) + USB_Host_SuspendBus(); + + if (HSOFIEnabled) + USB_INT_Enable(USB_INT_HSOFI); + + return ErrorCode; +} + +static void USB_Host_ResetDevice(void) +{ + bool BusSuspended = USB_Host_IsBusSuspended(); + + USB_INT_Disable(USB_INT_DDISCI); + + USB_Host_ResetBus(); + while (!(USB_Host_IsBusResetComplete())); + USB_Host_ResumeBus(); + + USB_Host_ConfigurationNumber = 0; + + bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI); + + USB_INT_Disable(USB_INT_HSOFI); + USB_INT_Clear(USB_INT_HSOFI); + + for (uint8_t MSRem = 10; MSRem != 0; MSRem--) + { + /* Workaround for powerless-pull-up devices. After a USB bus reset, + all disconnection interrupts are suppressed while a USB frame is + looked for - if it is found within 10ms, the device is still + present. */ + + if (USB_INT_HasOccurred(USB_INT_HSOFI)) + { + USB_INT_Clear(USB_INT_HSOFI); + USB_INT_Clear(USB_INT_DDISCI); + break; + } + + Delay_MS(1); + } + + if (HSOFIEnabled) + USB_INT_Enable(USB_INT_HSOFI); + + if (BusSuspended) + USB_Host_SuspendBus(); + + USB_INT_Enable(USB_INT_DDISCI); +} + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h new file mode 100644 index 0000000000..7a48e3162d --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h @@ -0,0 +1,372 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Host definitions for the AVR8 microcontrollers. + * \copydetails Group_Host_AVR8 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_Host + * \defgroup Group_Host_AVR8 Host Management (AVR8) + * \brief USB Host definitions for the AVR8 microcontrollers. + * + * Architecture specific USB Host definitions for the Atmel 8-bit AVR microcontrollers. + * + * @{ + */ + +#ifndef __USBHOST_AVR8_H__ +#define __USBHOST_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../StdDescriptors.h" + #include "../Pipe.h" + #include "../USBInterrupt.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + #if defined(INVERTED_VBUS_ENABLE_LINE) && !defined(NO_AUTO_VBUS_MANAGEMENT) + #error The INVERTED_VBUS_ENABLE_LINE compile option requires NO_AUTO_VBUS_MANAGEMENT for the AVR8 architecture. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Indicates the fixed USB device address which any attached device is enumerated to when in + * host mode. As only one USB device may be attached to the AVR in host mode at any one time + * and that the address used is not important (other than the fact that it is non-zero), a + * fixed value is specified by the library. + */ + #define USB_HOST_DEVICEADDRESS 1 + + #if !defined(HOST_DEVICE_SETTLE_DELAY_MS) || defined(__DOXYGEN__) + /** Constant for the delay in milliseconds after a device is connected before the library + * will start the enumeration process. Some devices require a delay of up to 5 seconds + * after connection before the enumeration process can start or incorrect operation will + * occur. + * + * The default delay value may be overridden in the user project makefile by defining the + * \c HOST_DEVICE_SETTLE_DELAY_MS token to the required delay in milliseconds, and passed to the + * compiler using the -D switch. + */ + #define HOST_DEVICE_SETTLE_DELAY_MS 1000 + #endif + + /** Enum for the error codes for the \ref EVENT_USB_Host_HostError() event. + * + * \see \ref Group_Events for more information on this event. + */ + enum USB_Host_ErrorCodes_t + { + HOST_ERROR_VBusVoltageDip = 0, /**< VBUS voltage dipped to an unacceptable level. This + * error may be the result of an attached device drawing + * too much current from the VBUS line, or due to the + * AVR's power source being unable to supply sufficient + * current. + */ + }; + + /** Enum for the error codes for the \ref EVENT_USB_Host_DeviceEnumerationFailed() event. + * + * \see \ref Group_Events for more information on this event. + */ + enum USB_Host_EnumerationErrorCodes_t + { + HOST_ENUMERROR_NoError = 0, /**< No error occurred. Used internally, this is not a valid + * ErrorCode parameter value for the \ref EVENT_USB_Host_DeviceEnumerationFailed() + * event. + */ + HOST_ENUMERROR_WaitStage = 1, /**< One of the delays between enumeration steps failed + * to complete successfully, due to a timeout or other + * error. + */ + HOST_ENUMERROR_NoDeviceDetected = 2, /**< No device was detected, despite the USB data lines + * indicating the attachment of a device. + */ + HOST_ENUMERROR_ControlError = 3, /**< One of the enumeration control requests failed to + * complete successfully. + */ + HOST_ENUMERROR_PipeConfigError = 4, /**< The default control pipe (address 0) failed to + * configure correctly. + */ + }; + + /* Inline Functions: */ + /** Returns the current USB frame number, when in host mode. Every millisecond the USB bus is active (i.e. not suspended) + * the frame number is incremented by one. + * + * \return Current USB frame number from the USB controller. + */ + static inline uint16_t USB_Host_GetFrameNumber(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t USB_Host_GetFrameNumber(void) + { + return UHFNUM; + } + + #if !defined(NO_SOF_EVENTS) + /** Enables the host mode Start Of Frame events. When enabled, this causes the + * \ref EVENT_USB_Host_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, + * at the start of each USB frame when a device is enumerated while in host mode. + * + * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Host_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_EnableSOFEvents(void) + { + USB_INT_Enable(USB_INT_HSOFI); + } + + /** Disables the host mode Start Of Frame events. When disabled, this stops the firing of the + * \ref EVENT_USB_Host_StartOfFrame() event when enumerated in host mode. + * + * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Host_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_DisableSOFEvents(void) + { + USB_INT_Disable(USB_INT_HSOFI); + } + #endif + + /** Resets the USB bus, including the endpoints in any attached device and pipes on the AVR host. + * USB bus resets leave the default control pipe configured (if already configured). + * + * If the USB bus has been suspended prior to issuing a bus reset, the attached device will be + * woken up automatically and the bus resumed after the reset has been correctly issued. + */ + static inline void USB_Host_ResetBus(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ResetBus(void) + { + UHCON |= (1 << RESET); + } + + /** Determines if a previously issued bus reset (via the \ref USB_Host_ResetBus() macro) has + * completed. + * + * \return Boolean \c true if no bus reset is currently being sent, \c false otherwise. + */ + static inline bool USB_Host_IsBusResetComplete(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsBusResetComplete(void) + { + return ((UHCON & (1 << RESET)) ? false : true); + } + + /** Resumes USB communications with an attached and enumerated device, by resuming the transmission + * of the 1MS Start Of Frame messages to the device. When resumed, USB communications between the + * host and attached device may occur. + */ + static inline void USB_Host_ResumeBus(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ResumeBus(void) + { + UHCON |= (1 << SOFEN); + } + + /** Suspends the USB bus, preventing any communications from occurring between the host and attached + * device until the bus has been resumed. This stops the transmission of the 1MS Start Of Frame + * messages to the device. + * + * \attention While the USB bus is suspended, all USB interrupt sources are also disabled; this means that + * some events (such as device disconnections) will not fire until the bus is resumed. + */ + static inline void USB_Host_SuspendBus(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_SuspendBus(void) + { + UHCON &= ~(1 << SOFEN); + } + + /** Determines if the USB bus has been suspended via the use of the \ref USB_Host_SuspendBus() macro, + * false otherwise. While suspended, no USB communications can occur until the bus is resumed, + * except for the Remote Wakeup event from the device if supported. + * + * \return Boolean \c true if the bus is currently suspended, \c false otherwise. + */ + static inline bool USB_Host_IsBusSuspended(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsBusSuspended(void) + { + return ((UHCON & (1 << SOFEN)) ? false : true); + } + + /** Determines if the attached device is currently enumerated in Full Speed mode (12Mb/s), or + * false if the attached device is enumerated in Low Speed mode (1.5Mb/s). + * + * \return Boolean \c true if the attached device is enumerated in Full Speed mode, \c false otherwise. + */ + static inline bool USB_Host_IsDeviceFullSpeed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsDeviceFullSpeed(void) + { + return ((USBSTA & (1 << SPEED)) ? true : false); + } + + /** Determines if the attached device is currently issuing a Remote Wakeup request, requesting + * that the host resume the USB bus and wake up the device, \c false otherwise. + * + * \return Boolean \c true if the attached device has sent a Remote Wakeup request, \c false otherwise. + */ + static inline bool USB_Host_IsRemoteWakeupSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsRemoteWakeupSent(void) + { + return ((UHINT & (1 << RXRSMI)) ? true : false); + } + + /** Clears the flag indicating that a Remote Wakeup request has been issued by an attached device. */ + static inline void USB_Host_ClearRemoteWakeupSent(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ClearRemoteWakeupSent(void) + { + UHINT &= ~(1 << RXRSMI); + } + + /** Accepts a Remote Wakeup request from an attached device. This must be issued in response to + * a device's Remote Wakeup request within 2ms for the request to be accepted and the bus to + * be resumed. + */ + static inline void USB_Host_ResumeFromWakeupRequest(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ResumeFromWakeupRequest(void) + { + UHCON |= (1 << RESUME); + } + + /** Determines if a resume from Remote Wakeup request is currently being sent to an attached + * device. + * + * \return Boolean \c true if no resume request is currently being sent, \c false otherwise. + */ + static inline bool USB_Host_IsResumeFromWakeupRequestSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsResumeFromWakeupRequestSent(void) + { + return ((UHCON & (1 << RESUME)) ? false : true); + } + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + static inline void USB_Host_HostMode_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_HostMode_On(void) + { + USBCON |= (1 << HOST); + } + + static inline void USB_Host_HostMode_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_HostMode_Off(void) + { + USBCON &= ~(1 << HOST); + } + + static inline void USB_Host_VBUS_Auto_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Auto_Enable(void) + { + OTGCON &= ~(1 << VBUSHWC); + UHWCON |= (1 << UVCONE); + } + + static inline void USB_Host_VBUS_Manual_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Manual_Enable(void) + { + OTGCON |= (1 << VBUSHWC); + UHWCON &= ~(1 << UVCONE); + + DDRE |= (1 << 7); + } + + static inline void USB_Host_VBUS_Auto_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Auto_On(void) + { + OTGCON |= (1 << VBUSREQ); + } + + static inline void USB_Host_VBUS_Manual_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Manual_On(void) + { + #if defined(INVERTED_VBUS_ENABLE_LINE) + PORTE &= ~(1 << 7); + #else + PORTE |= (1 << 7); + #endif + } + + static inline void USB_Host_VBUS_Auto_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Auto_Off(void) + { + OTGCON |= (1 << VBUSRQC); + } + + static inline void USB_Host_VBUS_Manual_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Manual_Off(void) + { + #if defined(INVERTED_VBUS_ENABLE_LINE) + PORTE |= (1 << 7); + #else + PORTE &= ~(1 << 7); + #endif + } + + static inline void USB_Host_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void USB_Host_SetDeviceAddress(const uint8_t Address) + { + UHADDR = (Address & 0x7F); + } + + /* Enums: */ + enum USB_Host_WaitMSErrorCodes_t + { + HOST_WAITERROR_Successful = 0, + HOST_WAITERROR_DeviceDisconnect = 1, + HOST_WAITERROR_PipeError = 2, + HOST_WAITERROR_SetupStalled = 3, + }; + + /* Function Prototypes: */ + void USB_Host_ProcessNextHostState(void); + uint8_t USB_Host_WaitMS(uint8_t MS); + + #if defined(__INCLUDE_FROM_HOST_C) + static void USB_Host_ResetDevice(void); + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/OTG_AVR8.h b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/OTG_AVR8.h new file mode 100644 index 0000000000..74c70ccdfd --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/OTG_AVR8.h @@ -0,0 +1,159 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB OTG definitions for the AVR8 microcontrollers. + * \copydetails Group_OTG_AVR8 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_OTG + * \defgroup Group_OTG_AVR8 USB On The Go (OTG) Management (AVR8) + * \brief USB OTG definitions for the AVR8 microcontrollers. + * + * Architecture specific USB OTG definitions for the Atmel 8-bit AVR microcontrollers. + * + * @{ + */ + +#ifndef __USBOTG_AVR8_H__ +#define __USBOTG_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Mask for the VBUS pulsing method of SRP, supported by some OTG devices. + * + * \see \ref USB_OTG_Device_InitiateSRP(). + */ + #define USB_OTG_SRP_VBUS (1 << SRPSEL) + + /** Mask for the Data + pulsing method of SRP, supported by some OTG devices. + * + * \see \ref USB_OTG_Device_InitiateSRP(). + */ + #define USB_OTG_STP_DATA 0 + + /* Inline Functions: */ + /** Initiate a Host Negotiation Protocol request. This indicates to the other connected device + * that the device wishes to change device/host roles. + */ + static inline void USB_OTG_Device_RequestHNP(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTG_Device_RequestHNP(void) + { + OTGCON |= (1 << HNPREQ); + } + + /** Cancel a Host Negotiation Protocol request. This stops a pending HNP request to the other + * connected device. + */ + static inline void USB_OTG_Device_CancelHNPRequest(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTG_Device_CancelHNPRequest(void) + { + OTGCON &= ~(1 << HNPREQ); + } + + /** Determines if the device is currently sending a HNP to an attached host. + * + * \return Boolean \c true if currently sending a HNP to the other connected device, \c false otherwise + */ + static inline bool USB_OTG_Device_IsSendingHNP(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_OTG_Device_IsSendingHNP(void) + { + return ((OTGCON & (1 << HNPREQ)) ? true : false); + } + + /** Initiates a Session Request Protocol request. Most OTG devices turn off VBUS when the USB + * interface is not in use, to conserve power. Sending a SRP to a USB OTG device running in + * host mode indicates that VBUS should be applied and a session started. + * + * There are two different methods of sending a SRP - either pulses on the VBUS line, or by + * pulsing the Data + line via the internal pull-up resistor. + * + * \param[in] SRPTypeMask Mask indicating the type of SRP to use, either \ref USB_OTG_SRP_VBUS or + * \ref USB_OTG_STP_DATA. + */ + static inline void USB_OTG_Device_InitiateSRP(const uint8_t SRPTypeMask) ATTR_ALWAYS_INLINE; + static inline void USB_OTG_Device_InitiateSRP(const uint8_t SRPTypeMask) + { + OTGCON = ((OTGCON & ~(1 << SRPSEL)) | (SRPTypeMask | (1 << SRPREQ))); + } + + /** Accepts a HNP from a connected device, indicating that both devices should exchange + * device/host roles. + */ + static inline void USB_OTG_Host_AcceptHNP(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTG_Host_AcceptHNP(void) + { + OTGCON |= (1 << HNPREQ); + } + + /** Rejects a HNP from a connected device, indicating that both devices should remain in their + * current device/host roles. + */ + static inline void USB_OTG_Host_RejectHNP(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTG_Host_RejectHNP(void) + { + OTGCON &= ~(1 << HNPREQ); + } + + /** Indicates if the connected device is currently sending a HNP request. + * + * \return Boolean \c true if a HNP is currently being issued by the connected device, \c false otherwise. + */ + static inline bool USB_OTG_Host_IsHNPReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_OTG_Host_IsHNPReceived(void) + { + return ((OTGCON & (1 << HNPREQ)) ? true : false); + } + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c new file mode 100644 index 0000000000..7b17d45d4f --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c @@ -0,0 +1,221 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_AVR8) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#include "PipeStream_AVR8.h" + +uint8_t Pipe_Discard_Stream(uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t ErrorCode; + uint16_t BytesInTransfer = 0; + + Pipe_SetPipeToken(PIPE_TOKEN_IN); + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + Length -= *BytesProcessed; + + while (Length) + { + if (!(Pipe_IsReadWriteAllowed())) + { + Pipe_ClearIN(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return PIPE_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + } + else + { + Pipe_Discard_8(); + + Length--; + BytesInTransfer++; + } + } + + return PIPE_RWSTREAM_NoError; +} + +uint8_t Pipe_Null_Stream(uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t ErrorCode; + uint16_t BytesInTransfer = 0; + + Pipe_SetPipeToken(PIPE_TOKEN_OUT); + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + Length -= *BytesProcessed; + + while (Length) + { + if (!(Pipe_IsReadWriteAllowed())) + { + Pipe_ClearOUT(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return PIPE_RWSTREAM_IncompleteTransfer; + } + + USB_USBTask(); + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + } + else + { + Pipe_Write_8(0); + + Length--; + BytesInTransfer++; + } + } + + return PIPE_RWSTREAM_NoError; +} + +/* The following abuses the C preprocessor in order to copy-paste common code with slight alterations, + * so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */ + +#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_LE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_TOKEN PIPE_TOKEN_OUT +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(*BufferPtr) +#include "Template/Template_Pipe_RW.c" + +#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_BE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_TOKEN PIPE_TOKEN_OUT +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(*BufferPtr) +#include "Template/Template_Pipe_RW.c" + +#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_LE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_TOKEN PIPE_TOKEN_IN +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_8() +#include "Template/Template_Pipe_RW.c" + +#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_BE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_TOKEN PIPE_TOKEN_IN +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_8() +#include "Template/Template_Pipe_RW.c" + +#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_LE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_TOKEN PIPE_TOKEN_OUT +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(pgm_read_byte(BufferPtr)) +#include "Template/Template_Pipe_RW.c" + +#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_BE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_TOKEN PIPE_TOKEN_OUT +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(pgm_read_byte(BufferPtr)) +#include "Template/Template_Pipe_RW.c" + +#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_LE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_TOKEN PIPE_TOKEN_OUT +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(eeprom_read_byte(BufferPtr)) +#include "Template/Template_Pipe_RW.c" + +#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_BE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_TOKEN PIPE_TOKEN_OUT +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(eeprom_read_byte(BufferPtr)) +#include "Template/Template_Pipe_RW.c" + +#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_LE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_TOKEN PIPE_TOKEN_IN +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_8()) +#include "Template/Template_Pipe_RW.c" + +#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_BE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_TOKEN PIPE_TOKEN_IN +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_8()) +#include "Template/Template_Pipe_RW.c" + +#endif + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.h b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.h new file mode 100644 index 0000000000..ca63bdf5a2 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.h @@ -0,0 +1,442 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Pipe data stream transmission and reception management for the AVR8 microcontrollers + * \copydetails Group_PipeStreamRW_AVR8 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_PipeStreamRW + * \defgroup Group_PipeStreamRW_AVR8 Read/Write of Multi-Byte Streams (AVR8) + * \brief Pipe data stream transmission and reception management for the Atmel AVR8 architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing of data streams from + * and to pipes. + * + * @{ + */ + +#ifndef __PIPE_STREAM_AVR8_H__ +#define __PIPE_STREAM_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBMode.h" + #include "../USBTask.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Function Prototypes: */ + /** \name Stream functions for null data */ + //@{ + + /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host + * as needed. The last packet is not automatically discarded once the remaining bytes has been read; the + * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or + * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer + * will instead be performed as a series of chunks. Each time the pipe bank becomes empty while there is still data + * to process (and after the current packet has been acknowledged) the BytesProcessed location will be updated with + * the total number of bytes processed in the stream, and the function will exit with an error code of + * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to + * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed + * value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t ErrorCode; + * + * if ((ErrorCode = Pipe_Discard_Stream(512, NULL)) != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Pipe_Discard_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[in] Length Number of bytes to discard via the currently selected pipe. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be processed at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Discard_Stream(uint16_t Length, + uint16_t* const BytesProcessed); + + /** Writes a given number of zeroed bytes to the pipe, sending full pipe packets from the host to the device + * as needed. The last packet is not automatically sent once the remaining bytes has been written; the + * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearOUT() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or + * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer + * will instead be performed as a series of chunks. Each time the pipe bank becomes full while there is still data + * to process (and after the current packet transmission has been initiated) the BytesProcessed location will be + * updated with the total number of bytes processed in the stream, and the function will exit with an error code of + * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to + * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed + * value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t ErrorCode; + * + * if ((ErrorCode = Pipe_Null_Stream(512, NULL)) != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Pipe_Null_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[in] Length Number of zero bytes to write via the currently selected pipe. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be processed at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Null_Stream(uint16_t Length, + uint16_t* const BytesProcessed); + + //@} + + /** \name Stream functions for RAM source/destination data */ + //@{ + + /** Writes the given number of bytes to the pipe from the given buffer in little endian, + * sending full packets to the device as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is + * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the pipe bank becomes full while there is still data to process (and after the current + * packet transmission has been initiated) the BytesProcessed location will be updated with the + * total number of bytes processed in the stream, and the function will exit with an error code of + * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * + * if ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream), + * NULL)) != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream), + * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_Stream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the pipe from the given buffer in big endian, + * sending full packets to the device as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is + * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. + * + * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_Stream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the pipe into the given buffer in little endian, + * sending full packets to the device as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is + * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the pipe bank becomes empty while there is still data to process (and after the current + * packet has been acknowledged) the BytesProcessed location will be updated with the total number + * of bytes processed in the stream, and the function will exit with an error code of + * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * + * if ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream), + * NULL)) != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream), + * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Read_Stream_LE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the pipe into the given buffer in big endian, + * sending full packets to the device as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is + * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. + * + * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Read_Stream_BE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /** \name Stream functions for EEPROM source/destination data */ + //@{ + + /** EEPROM buffer source version of \ref Pipe_Write_Stream_LE(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_EStream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Pipe_Write_Stream_BE(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_EStream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Pipe_Read_Stream_LE(). + * + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Read_EStream_LE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Pipe_Read_Stream_BE(). + * + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Read_EStream_BE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /** \name Stream functions for PROGMEM source/destination data */ + //@{ + + /** FLASH buffer source version of \ref Pipe_Write_Stream_LE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_PStream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** FLASH buffer source version of \ref Pipe_Write_Stream_BE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_PStream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c new file mode 100644 index 0000000000..20239d06f8 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c @@ -0,0 +1,210 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_AVR8) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#include "../Pipe.h" + +uint8_t USB_Host_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE; + +bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Pipe_ConfigurePipe(Table[i].Address, Table[i].Type, Table[i].EndpointAddress, Table[i].Size, Table[i].Banks))) + { + return false; + } + } + + return true; +} + +bool Pipe_ConfigurePipe(const uint8_t Address, + const uint8_t Type, + const uint8_t EndpointAddress, + const uint16_t Size, + const uint8_t Banks) +{ + uint8_t Number = (Address & PIPE_EPNUM_MASK); + uint8_t Token = (Address & PIPE_DIR_IN) ? PIPE_TOKEN_IN : PIPE_TOKEN_OUT; + + if (Number >= PIPE_TOTAL_PIPES) + return false; + + if (Type == EP_TYPE_CONTROL) + Token = PIPE_TOKEN_SETUP; + +#if defined(ORDERED_EP_CONFIG) + Pipe_SelectPipe(Number); + Pipe_EnablePipe(); + + UPCFG1X = 0; + + UPCFG0X = ((Type << EPTYPE0) | Token | ((EndpointAddress & PIPE_EPNUM_MASK) << PEPNUM0)); + UPCFG1X = ((1 << ALLOC) | ((Banks > 1) ? (1 << EPBK0) : 0) | Pipe_BytesToEPSizeMask(Size)); + + Pipe_SetInfiniteINRequests(); + + return Pipe_IsConfigured(); +#else + for (uint8_t PNum = Number; PNum < PIPE_TOTAL_PIPES; PNum++) + { + uint8_t UPCFG0XTemp; + uint8_t UPCFG1XTemp; + uint8_t UPCFG2XTemp; + uint8_t UPIENXTemp; + + Pipe_SelectPipe(PNum); + + if (PNum == Number) + { + UPCFG0XTemp = ((Type << EPTYPE0) | Token | ((EndpointAddress & PIPE_EPNUM_MASK) << PEPNUM0)); + UPCFG1XTemp = ((1 << ALLOC) | ((Banks > 1) ? (1 << EPBK0) : 0) | Pipe_BytesToEPSizeMask(Size)); + UPCFG2XTemp = 0; + UPIENXTemp = 0; + } + else + { + UPCFG0XTemp = UPCFG0X; + UPCFG1XTemp = UPCFG1X; + UPCFG2XTemp = UPCFG2X; + UPIENXTemp = UPIENX; + } + + if (!(UPCFG1XTemp & (1 << ALLOC))) + continue; + + Pipe_DisablePipe(); + UPCFG1X &= ~(1 << ALLOC); + + Pipe_EnablePipe(); + UPCFG0X = UPCFG0XTemp; + UPCFG1X = UPCFG1XTemp; + UPCFG2X = UPCFG2XTemp; + UPIENX = UPIENXTemp; + + Pipe_SetInfiniteINRequests(); + + if (!(Pipe_IsConfigured())) + return false; + } + + Pipe_SelectPipe(Number); + return true; +#endif +} + +void Pipe_ClearPipes(void) +{ + UPINT = 0; + + for (uint8_t PNum = 0; PNum < PIPE_TOTAL_PIPES; PNum++) + { + Pipe_SelectPipe(PNum); + UPIENX = 0; + UPINTX = 0; + UPCFG1X = 0; + Pipe_DisablePipe(); + } +} + +bool Pipe_IsEndpointBound(const uint8_t EndpointAddress) +{ + uint8_t PrevPipeNumber = Pipe_GetCurrentPipe(); + + for (uint8_t PNum = 0; PNum < PIPE_TOTAL_PIPES; PNum++) + { + Pipe_SelectPipe(PNum); + + if (!(Pipe_IsConfigured())) + continue; + + if (Pipe_GetBoundEndpointAddress() == EndpointAddress) + return true; + } + + Pipe_SelectPipe(PrevPipeNumber); + return false; +} + +uint8_t Pipe_WaitUntilReady(void) +{ + #if (USB_STREAM_TIMEOUT_MS < 0xFF) + uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #else + uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #endif + + uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber(); + + for (;;) + { + if (Pipe_GetPipeToken() == PIPE_TOKEN_IN) + { + if (Pipe_IsINReceived()) + return PIPE_READYWAIT_NoError; + } + else + { + if (Pipe_IsOUTReady()) + return PIPE_READYWAIT_NoError; + } + + if (Pipe_IsStalled()) + return PIPE_READYWAIT_PipeStalled; + else if (USB_HostState == HOST_STATE_Unattached) + return PIPE_READYWAIT_DeviceDisconnected; + + uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber(); + + if (CurrentFrameNumber != PreviousFrameNumber) + { + PreviousFrameNumber = CurrentFrameNumber; + + if (!(TimeoutMSRem--)) + return PIPE_READYWAIT_Timeout; + } + } +} + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h new file mode 100644 index 0000000000..3521efbe9e --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h @@ -0,0 +1,922 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Pipe definitions for the AVR8 microcontrollers. + * \copydetails Group_PipeManagement_AVR8 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_PipeRW + * \defgroup Group_PipeRW_AVR8 Pipe Data Reading and Writing (AVR8) + * \brief Pipe data read/write definitions for the Atmel AVR8 architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing from and to pipes. + */ + +/** \ingroup Group_PipePrimitiveRW + * \defgroup Group_PipePrimitiveRW_AVR8 Read/Write of Primitive Data Types (AVR8) + * \brief Pipe primitive data read/write definitions for the Atmel AVR8 architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing of primitive data types + * from and to pipes. + */ + +/** \ingroup Group_PipePacketManagement + * \defgroup Group_PipePacketManagement_AVR8 Pipe Packet Management (AVR8) + * \brief Pipe packet management definitions for the Atmel AVR8 architecture. + * + * Functions, macros, variables, enums and types related to packet management of pipes. + */ + +/** \ingroup Group_PipeControlReq + * \defgroup Group_PipeControlReq_AVR8 Pipe Control Request Management (AVR8) + * \brief Pipe control request management definitions for the Atmel AVR8 architecture. + * + * Module for host mode request processing. This module allows for the transmission of standard, class and + * vendor control requests to the default control endpoint of an attached device while in host mode. + * + * \see Chapter 9 of the USB 2.0 specification. + */ + +/** \ingroup Group_PipeManagement + * \defgroup Group_PipeManagement_AVR8 Pipe Management (AVR8) + * \brief Pipe management definitions for the Atmel AVR8 architecture. + * + * This module contains functions, macros and enums related to pipe management when in USB Host mode. This + * module contains the pipe management macros, as well as pipe interrupt and data send/receive functions + * for various data types. + * + * @{ + */ + +#ifndef __PIPE_AVR8_H__ +#define __PIPE_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBTask.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name Pipe Error Flag Masks */ + //@{ + /** Mask for \ref Pipe_GetErrorFlags(), indicating that an overflow error occurred in the pipe on the received data. */ + #define PIPE_ERRORFLAG_OVERFLOW (1 << 6) + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that an underflow error occurred in the pipe on the received data. */ + #define PIPE_ERRORFLAG_UNDERFLOW (1 << 5) + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a CRC error occurred in the pipe on the received data. */ + #define PIPE_ERRORFLAG_CRC16 (1 << 4) + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware timeout error occurred in the pipe. */ + #define PIPE_ERRORFLAG_TIMEOUT (1 << 3) + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware PID error occurred in the pipe. */ + #define PIPE_ERRORFLAG_PID (1 << 2) + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data PID error occurred in the pipe. */ + #define PIPE_ERRORFLAG_DATAPID (1 << 1) + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */ + #define PIPE_ERRORFLAG_DATATGL (1 << 0) + //@} + + /** \name Pipe Token Masks */ + //@{ + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a SETUP token (for CONTROL type pipes), + * which will trigger a control request on the attached device when data is written to the pipe. + */ + #define PIPE_TOKEN_SETUP (0 << PTOKEN0) + + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a IN token (for non-CONTROL type pipes), + * indicating that the pipe data will flow from device to host. + */ + #define PIPE_TOKEN_IN (1 << PTOKEN0) + + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a OUT token (for non-CONTROL type pipes), + * indicating that the pipe data will flow from host to device. + */ + #define PIPE_TOKEN_OUT (2 << PTOKEN0) + //@} + + /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value + * in the device descriptor of the attached device. + */ + #define PIPE_CONTROLPIPE_DEFAULT_SIZE 64 + + /** Total number of pipes (including the default control pipe at address 0) which may be used in + * the device. Different USB AVR models support different amounts of pipes, this value reflects + * the maximum number of pipes for the currently selected AVR model. + */ + #define PIPE_TOTAL_PIPES 7 + + /** Size in bytes of the largest pipe bank size possible in the device. Not all banks on each AVR + * model supports the largest bank size possible on the device; different pipe numbers support + * different maximum bank sizes. This value reflects the largest possible bank of any pipe on the + * currently selected USB AVR model. + */ + #define PIPE_MAX_SIZE 256 + + /* Enums: */ + /** Enum for the possible error return codes of the \ref Pipe_WaitUntilReady() function. + * + * \ingroup Group_PipeRW_AVR8 + */ + enum Pipe_WaitUntilReady_ErrorCodes_t + { + PIPE_READYWAIT_NoError = 0, /**< Pipe ready for next packet, no error. */ + PIPE_READYWAIT_PipeStalled = 1, /**< The device stalled the pipe while waiting. */ + PIPE_READYWAIT_DeviceDisconnected = 2, /**< Device was disconnected from the host while waiting. */ + PIPE_READYWAIT_Timeout = 3, /**< The device failed to accept or send the next packet + * within the software timeout period set by the + * \ref USB_STREAM_TIMEOUT_MS macro. + */ + }; + + /* Inline Functions: */ + /** Indicates the number of bytes currently stored in the current pipes's selected bank. + * + * \ingroup Group_PipeRW_AVR8 + * + * \return Total number of bytes in the currently selected pipe's FIFO buffer. + */ + static inline uint16_t Pipe_BytesInPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Pipe_BytesInPipe(void) + { + return UPBCX; + } + + /** Determines the currently selected pipe's direction. + * + * \return The currently selected pipe's direction, as a \c PIPE_DIR_* mask. + */ + static inline uint8_t Pipe_GetPipeDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeDirection(void) + { + return (UPCFG0X & (1 << EPDIR)) ? PIPE_DIR_IN : PIPE_DIR_OUT; + } + + /** Returns the pipe address of the currently selected pipe. This is typically used to save the + * currently selected pipe address so that it can be restored after another pipe has been manipulated. + * + * \return Index of the currently selected pipe. + */ + static inline uint8_t Pipe_GetCurrentPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetCurrentPipe(void) + { + return ((UPNUM & PIPE_PIPENUM_MASK) | Pipe_GetPipeDirection()); + } + + /** Selects the given pipe address. Any pipe operations which do not require the pipe address to be + * indicated will operate on the currently selected pipe. + * + * \param[in] Address Address of the pipe to select. + */ + static inline void Pipe_SelectPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_SelectPipe(const uint8_t Address) + { + UPNUM = (Address & PIPE_PIPENUM_MASK); + } + + /** Resets the desired pipe, including the pipe banks and flags. + * + * \param[in] Address Address of the pipe to reset. + */ + static inline void Pipe_ResetPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_ResetPipe(const uint8_t Address) + { + UPRST = (1 << (Address & PIPE_PIPENUM_MASK)); + UPRST = 0; + } + + /** Enables the currently selected pipe so that data can be sent and received through it to and from + * an attached device. + * + * \pre The currently selected pipe must first be configured properly via \ref Pipe_ConfigurePipe(). + */ + static inline void Pipe_EnablePipe(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_EnablePipe(void) + { + UPCONX |= (1 << PEN); + } + + /** Disables the currently selected pipe so that data cannot be sent and received through it to and + * from an attached device. + */ + static inline void Pipe_DisablePipe(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_DisablePipe(void) + { + UPCONX &= ~(1 << PEN); + } + + /** Determines if the currently selected pipe is enabled, but not necessarily configured. + * + * \return Boolean \c true if the currently selected pipe is enabled, \c false otherwise. + */ + static inline bool Pipe_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsEnabled(void) + { + return ((UPCONX & (1 << PEN)) ? true : false); + } + + /** Gets the current pipe token, indicating the pipe's data direction and type. + * + * \return The current pipe token, as a \c PIPE_TOKEN_* mask. + */ + static inline uint8_t Pipe_GetPipeToken(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeToken(void) + { + return (UPCFG0X & (0x03 << PTOKEN0)); + } + + /** Sets the token for the currently selected pipe to one of the tokens specified by the \c PIPE_TOKEN_* + * masks. This can be used on CONTROL type pipes, to allow for bidirectional transfer of data during + * control requests, or on regular pipes to allow for half-duplex bidirectional data transfer to devices + * which have two endpoints of opposite direction sharing the same endpoint address within the device. + * + * \param[in] Token New pipe token to set the selected pipe to, as a \c PIPE_TOKEN_* mask. + */ + static inline void Pipe_SetPipeToken(const uint8_t Token) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetPipeToken(const uint8_t Token) + { + UPCFG0X = ((UPCFG0X & ~(0x03 << PTOKEN0)) | Token); + } + + /** Configures the currently selected pipe to allow for an unlimited number of IN requests. */ + static inline void Pipe_SetInfiniteINRequests(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetInfiniteINRequests(void) + { + UPCONX |= (1 << INMODE); + } + + /** Configures the currently selected pipe to only allow the specified number of IN requests to be + * accepted by the pipe before it is automatically frozen. + * + * \param[in] TotalINRequests Total number of IN requests that the pipe may receive before freezing. + */ + static inline void Pipe_SetFiniteINRequests(const uint8_t TotalINRequests) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetFiniteINRequests(const uint8_t TotalINRequests) + { + UPCONX &= ~(1 << INMODE); + UPINRQX = TotalINRequests; + } + + /** Determines if the currently selected pipe is configured. + * + * \return Boolean \c true if the selected pipe is configured, \c false otherwise. + */ + static inline bool Pipe_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsConfigured(void) + { + return ((UPSTAX & (1 << CFGOK)) ? true : false); + } + + /** Retrieves the endpoint address of the endpoint within the attached device that the currently selected + * pipe is bound to. + * + * \return Endpoint address the currently selected pipe is bound to. + */ + static inline uint8_t Pipe_GetBoundEndpointAddress(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetBoundEndpointAddress(void) + { + uint8_t UPCFG0X_Temp = UPCFG0X; + + return (((UPCFG0X_Temp >> PEPNUM0) & PIPE_EPNUM_MASK) | + ((UPCFG0X_Temp & (1 << PTOKEN1)) ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT)); + } + + /** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds. + * + * \param[in] Milliseconds Number of milliseconds between each pipe poll. + */ + static inline void Pipe_SetInterruptPeriod(const uint8_t Milliseconds) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetInterruptPeriod(const uint8_t Milliseconds) + { + UPCFG2X = Milliseconds; + } + + /** Returns a mask indicating which pipe's interrupt periods have elapsed, indicating that the pipe should + * be serviced. + * + * \return Mask whose bits indicate which pipes have interrupted. + */ + static inline uint8_t Pipe_GetPipeInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeInterrupts(void) + { + return UPINT; + } + + /** Determines if the specified pipe address has interrupted (valid only for INTERRUPT type + * pipes). + * + * \param[in] Address Address of the pipe whose interrupt flag should be tested. + * + * \return Boolean \c true if the specified pipe has interrupted, \c false otherwise. + */ + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) + { + return ((UPINT & (1 << (Address & PIPE_PIPENUM_MASK))) ? true : false); + } + + /** Unfreezes the selected pipe, allowing it to communicate with an attached device. */ + static inline void Pipe_Unfreeze(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Unfreeze(void) + { + UPCONX &= ~(1 << PFREEZE); + } + + /** Freezes the selected pipe, preventing it from communicating with an attached device. */ + static inline void Pipe_Freeze(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Freeze(void) + { + UPCONX |= (1 << PFREEZE); + } + + /** Determines if the currently selected pipe is frozen, and not able to accept data. + * + * \return Boolean \c true if the currently selected pipe is frozen, \c false otherwise. + */ + static inline bool Pipe_IsFrozen(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsFrozen(void) + { + return ((UPCONX & (1 << PFREEZE)) ? true : false); + } + + /** Clears the error flags for the currently selected pipe. */ + static inline void Pipe_ClearError(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearError(void) + { + UPERRX = 0; + UPINTX &= ~(1 << PERRI); + } + + /** Determines if the master pipe error flag is set for the currently selected pipe, indicating that + * some sort of hardware error has occurred on the pipe. + * + * \see \ref Pipe_GetErrorFlags() macro for information on retrieving the exact error flag. + * + * \return Boolean \c true if an error has occurred on the selected pipe, \c false otherwise. + */ + static inline bool Pipe_IsError(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsError(void) + { + return ((UPINTX & (1 << PERRI)) ? true : false); + } + + /** Gets a mask of the hardware error flags which have occurred on the currently selected pipe. This + * value can then be masked against the \c PIPE_ERRORFLAG_* masks to determine what error has occurred. + * + * \return Mask comprising of \c PIPE_ERRORFLAG_* bits indicating what error has occurred on the selected pipe. + */ + static inline uint8_t Pipe_GetErrorFlags(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetErrorFlags(void) + { + return ((UPERRX & (PIPE_ERRORFLAG_CRC16 | PIPE_ERRORFLAG_TIMEOUT | + PIPE_ERRORFLAG_PID | PIPE_ERRORFLAG_DATAPID | + PIPE_ERRORFLAG_DATATGL)) | + (UPSTAX & (PIPE_ERRORFLAG_OVERFLOW | PIPE_ERRORFLAG_UNDERFLOW))); + } + + /** Retrieves the number of busy banks in the currently selected pipe, which have been queued for + * transmission via the \ref Pipe_ClearOUT() command, or are awaiting acknowledgement via the + * \ref Pipe_ClearIN() command. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Total number of busy banks in the selected pipe. + */ + static inline uint8_t Pipe_GetBusyBanks(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetBusyBanks(void) + { + return (UPSTAX & (0x03 << NBUSYBK0)); + } + + /** Determines if the currently selected pipe may be read from (if data is waiting in the pipe + * bank and the pipe is an IN direction, or if the bank is not yet full if the pipe is an OUT + * direction). This function will return false if an error has occurred in the pipe, or if the pipe + * is an IN direction and no packet (or an empty packet) has been received, or if the pipe is an OUT + * direction and the pipe bank is full. + * + * \note This function is not valid on CONTROL type pipes. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Boolean \c true if the currently selected pipe may be read from or written to, depending + * on its direction. + */ + static inline bool Pipe_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsReadWriteAllowed(void) + { + return ((UPINTX & (1 << RWAL)) ? true : false); + } + + /** Determines if a packet has been received on the currently selected IN pipe from the attached device. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Boolean \c true if the current pipe has received an IN packet, \c false otherwise. + */ + static inline bool Pipe_IsINReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsINReceived(void) + { + return ((UPINTX & (1 << RXINI)) ? true : false); + } + + /** Determines if the currently selected OUT pipe is ready to send an OUT packet to the attached device. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Boolean \c true if the current pipe is ready for an OUT packet, \c false otherwise. + */ + static inline bool Pipe_IsOUTReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsOUTReady(void) + { + return ((UPINTX & (1 << TXOUTI)) ? true : false); + } + + /** Determines if no SETUP request is currently being sent to the attached device on the selected + * CONTROL type pipe. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Boolean \c true if the current pipe is ready for a SETUP packet, \c false otherwise. + */ + static inline bool Pipe_IsSETUPSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsSETUPSent(void) + { + return ((UPINTX & (1 << TXSTPI)) ? true : false); + } + + /** Sends the currently selected CONTROL type pipe's contents to the device as a SETUP packet. + * + * \ingroup Group_PipePacketManagement_AVR8 + */ + static inline void Pipe_ClearSETUP(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearSETUP(void) + { + UPINTX &= ~((1 << TXSTPI) | (1 << FIFOCON)); + } + + /** Acknowledges the reception of a setup IN request from the attached device on the currently selected + * pipe, freeing the bank ready for the next packet. + * + * \ingroup Group_PipePacketManagement_AVR8 + */ + static inline void Pipe_ClearIN(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearIN(void) + { + UPINTX &= ~((1 << RXINI) | (1 << FIFOCON)); + } + + /** Sends the currently selected pipe's contents to the device as an OUT packet on the selected pipe, freeing + * the bank ready for the next packet. + * + * \ingroup Group_PipePacketManagement_AVR8 + */ + static inline void Pipe_ClearOUT(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearOUT(void) + { + UPINTX &= ~((1 << TXOUTI) | (1 << FIFOCON)); + } + + /** Determines if the device sent a NAK (Negative Acknowledge) in response to the last sent packet on + * the currently selected pipe. This occurs when the host sends a packet to the device, but the device + * is not currently ready to handle the packet (i.e. its endpoint banks are full). Once a NAK has been + * received, it must be cleared using \ref Pipe_ClearNAKReceived() before the previous (or any other) packet + * can be re-sent. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Boolean \c true if an NAK has been received on the current pipe, \c false otherwise. + */ + static inline bool Pipe_IsNAKReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsNAKReceived(void) + { + return ((UPINTX & (1 << NAKEDI)) ? true : false); + } + + /** Clears the NAK condition on the currently selected pipe. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \see \ref Pipe_IsNAKReceived() for more details. + */ + static inline void Pipe_ClearNAKReceived(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearNAKReceived(void) + { + UPINTX &= ~(1 << NAKEDI); + } + + /** Determines if the currently selected pipe has had the STALL condition set by the attached device. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Boolean \c true if the current pipe has been stalled by the attached device, \c false otherwise. + */ + static inline bool Pipe_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsStalled(void) + { + return ((UPINTX & (1 << RXSTALLI)) ? true : false); + } + + /** Clears the STALL condition detection flag on the currently selected pipe, but does not clear the + * STALL condition itself (this must be done via a ClearFeature control request to the device). + * + * \ingroup Group_PipePacketManagement_AVR8 + */ + static inline void Pipe_ClearStall(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearStall(void) + { + UPINTX &= ~(1 << RXSTALLI); + } + + /** Reads one byte from the currently selected pipe's bank, for OUT direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \return Next byte in the currently selected pipe's FIFO buffer. + */ + static inline uint8_t Pipe_Read_8(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_Read_8(void) + { + return UPDATX; + } + + /** Writes one byte to the currently selected pipe's bank, for IN direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \param[in] Data Data to write into the the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_8(const uint8_t Data) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_8(const uint8_t Data) + { + UPDATX = Data; + } + + /** Discards one byte from the currently selected pipe's bank, for OUT direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + */ + static inline void Pipe_Discard_8(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Discard_8(void) + { + uint8_t Dummy; + + Dummy = UPDATX; + + (void)Dummy; + } + + /** Reads two bytes from the currently selected pipe's bank in little endian format, for OUT + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \return Next two bytes in the currently selected pipe's FIFO buffer. + */ + static inline uint16_t Pipe_Read_16_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Pipe_Read_16_LE(void) + { + union + { + uint16_t Value; + uint8_t Bytes[2]; + } Data; + + Data.Bytes[0] = UPDATX; + Data.Bytes[1] = UPDATX; + + return Data.Value; + } + + /** Reads two bytes from the currently selected pipe's bank in big endian format, for OUT + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \return Next two bytes in the currently selected pipe's FIFO buffer. + */ + static inline uint16_t Pipe_Read_16_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Pipe_Read_16_BE(void) + { + union + { + uint16_t Value; + uint8_t Bytes[2]; + } Data; + + Data.Bytes[1] = UPDATX; + Data.Bytes[0] = UPDATX; + + return Data.Value; + } + + /** Writes two bytes to the currently selected pipe's bank in little endian format, for IN + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \param[in] Data Data to write to the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_16_LE(const uint16_t Data) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_16_LE(const uint16_t Data) + { + UPDATX = (Data & 0xFF); + UPDATX = (Data >> 8); + } + + /** Writes two bytes to the currently selected pipe's bank in big endian format, for IN + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \param[in] Data Data to write to the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_16_BE(const uint16_t Data) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_16_BE(const uint16_t Data) + { + UPDATX = (Data >> 8); + UPDATX = (Data & 0xFF); + } + + /** Discards two bytes from the currently selected pipe's bank, for OUT direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + */ + static inline void Pipe_Discard_16(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Discard_16(void) + { + uint8_t Dummy; + + Dummy = UPDATX; + Dummy = UPDATX; + + (void)Dummy; + } + + /** Reads four bytes from the currently selected pipe's bank in little endian format, for OUT + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \return Next four bytes in the currently selected pipe's FIFO buffer. + */ + static inline uint32_t Pipe_Read_32_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Pipe_Read_32_LE(void) + { + union + { + uint32_t Value; + uint8_t Bytes[4]; + } Data; + + Data.Bytes[0] = UPDATX; + Data.Bytes[1] = UPDATX; + Data.Bytes[2] = UPDATX; + Data.Bytes[3] = UPDATX; + + return Data.Value; + } + + /** Reads four bytes from the currently selected pipe's bank in big endian format, for OUT + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \return Next four bytes in the currently selected pipe's FIFO buffer. + */ + static inline uint32_t Pipe_Read_32_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Pipe_Read_32_BE(void) + { + union + { + uint32_t DWord; + uint8_t Bytes[4]; + } Data; + + Data.Bytes[3] = UPDATX; + Data.Bytes[2] = UPDATX; + Data.Bytes[1] = UPDATX; + Data.Bytes[0] = UPDATX; + + return Data.DWord; + } + + /** Writes four bytes to the currently selected pipe's bank in little endian format, for IN + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \param[in] Data Data to write to the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_32_LE(const uint32_t Data) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_32_LE(const uint32_t Data) + { + UPDATX = (Data & 0xFF); + UPDATX = (Data >> 8); + UPDATX = (Data >> 16); + UPDATX = (Data >> 24); + } + + /** Writes four bytes to the currently selected pipe's bank in big endian format, for IN + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \param[in] Data Data to write to the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_32_BE(const uint32_t Data) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_32_BE(const uint32_t Data) + { + UPDATX = (Data >> 24); + UPDATX = (Data >> 16); + UPDATX = (Data >> 8); + UPDATX = (Data & 0xFF); + } + + /** Discards four bytes from the currently selected pipe's bank, for OUT direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + */ + static inline void Pipe_Discard_32(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Discard_32(void) + { + uint8_t Dummy; + + Dummy = UPDATX; + Dummy = UPDATX; + Dummy = UPDATX; + Dummy = UPDATX; + + (void)Dummy; + } + + /* External Variables: */ + /** Global indicating the maximum packet size of the default control pipe located at address + * 0 in the device. This value is set to the value indicated in the attached device's device + * descriptor once the USB interface is initialized into host mode and a device is attached + * to the USB bus. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + extern uint8_t USB_Host_ControlPipeSize; + + /* Function Prototypes: */ + /** Configures a table of pipe descriptions, in sequence. This function can be used to configure multiple + * pipes at the same time. + * + * \note Pipe with a zero address will be ignored, thus this function cannot be used to configure the + * control pipe. + * + * \param[in] Table Pointer to a table of pipe descriptions. + * \param[in] Entries Number of entries in the pipe table to configure. + * + * \return Boolean \c true if all pipes configured successfully, \c false otherwise. + */ + bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table, + const uint8_t Entries); + + /** Configures the specified pipe address with the given pipe type, endpoint address within the attached device, + * bank size and number of hardware banks. + * + * A newly configured pipe is frozen by default, and must be unfrozen before use via the \ref Pipe_Unfreeze() + * before being used. Pipes should be kept frozen unless waiting for data from a device while in IN mode, or + * sending data to the device in OUT mode. IN type pipes are also automatically configured to accept infinite + * numbers of IN requests without automatic freezing - this can be overridden by a call to + * \ref Pipe_SetFiniteINRequests(). + * + * \param[in] Address Pipe address to configure. + * + * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low + * Speed USB devices - refer to the USB 2.0 specification. + * + * \param[in] EndpointAddress Endpoint address within the attached device that the pipe should interface to. + * + * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to + * the USB device, or after they have been received from the USB device (depending on + * the pipe's data direction). The bank size must indicate the maximum packet size that + * the pipe can handle. + * + * \param[in] Banks Number of banks to use for the pipe being configured. + * + * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Pipes <b>must</b> be configured in ascending order, + * or bank corruption will occur. + * + * \note Certain microcontroller model's pipes may have different maximum packet sizes based on the pipe's + * index - refer to the chosen microcontroller's datasheet to determine the maximum bank size for each pipe. + * \n\n + * + * \note The default control pipe should not be manually configured by the user application, as it is + * automatically configured by the library internally. + * \n\n + * + * \note This routine will automatically select the specified pipe upon success. Upon failure, the pipe which + * failed to reconfigure correctly will be selected. + * + * \return Boolean \c true if the configuration succeeded, \c false otherwise. + */ + bool Pipe_ConfigurePipe(const uint8_t Address, + const uint8_t Type, + const uint8_t EndpointAddress, + const uint16_t Size, + const uint8_t Banks); + + /** Spin-loops until the currently selected non-control pipe is ready for the next packet of data to be read + * or written to it, aborting in the case of an error condition (such as a timeout or device disconnect). + * + * \ingroup Group_PipeRW_AVR8 + * + * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t Pipe_WaitUntilReady(void); + + /** Determines if a pipe has been bound to the given device endpoint address. If a pipe which is bound to the given + * endpoint is found, it is automatically selected. + * + * \param[in] EndpointAddress Address and direction mask of the endpoint within the attached device to check. + * + * \return Boolean \c true if a pipe bound to the given endpoint address of the specified direction is found, + * \c false otherwise. + */ + bool Pipe_IsEndpointBound(const uint8_t EndpointAddress) ATTR_WARN_UNUSED_RESULT; + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #if !defined(ENDPOINT_CONTROLEP) + #define ENDPOINT_CONTROLEP 0 + #endif + + /* Inline Functions: */ + static inline uint8_t Pipe_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_BytesToEPSizeMask(const uint16_t Bytes) + { + uint8_t MaskVal = 0; + uint16_t CheckBytes = 8; + + while ((CheckBytes < Bytes) && (CheckBytes < PIPE_MAX_SIZE)) + { + MaskVal++; + CheckBytes <<= 1; + } + + return (MaskVal << EPSIZE0); + } + + /* Function Prototypes: */ + void Pipe_ClearPipes(void); + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c new file mode 100644 index 0000000000..f6c4beb229 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c @@ -0,0 +1,84 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (void* const Buffer, + uint16_t Length) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + + if (!(Length)) + Endpoint_ClearOUT(); + + while (Length) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + else if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + + if (Endpoint_IsOUTReceived()) + { + while (Length && Endpoint_BytesInEndpoint()) + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + } + + Endpoint_ClearOUT(); + } + } + + while (!(Endpoint_IsINReady())) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + } + + return ENDPOINT_RWCSTREAM_NoError; +} + +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_TRANSFER_BYTE + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c new file mode 100644 index 0000000000..922b58efa3 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c @@ -0,0 +1,95 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (const void* const Buffer, + uint16_t Length) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + bool LastPacketFull = false; + + if (Length > USB_ControlRequest.wLength) + Length = USB_ControlRequest.wLength; + else if (!(Length)) + Endpoint_ClearIN(); + + while (Length || LastPacketFull) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + else if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + else if (Endpoint_IsOUTReceived()) + break; + + if (Endpoint_IsINReady()) + { + uint16_t BytesInEndpoint = Endpoint_BytesInEndpoint(); + + while (Length && (BytesInEndpoint < USB_Device_ControlEndpointSize)) + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + BytesInEndpoint++; + } + + LastPacketFull = (BytesInEndpoint == USB_Device_ControlEndpointSize); + Endpoint_ClearIN(); + } + } + + while (!(Endpoint_IsOUTReceived())) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + else if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + } + + return ENDPOINT_RWCSTREAM_NoError; +} + +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_TRANSFER_BYTE + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c new file mode 100644 index 0000000000..e55e592eb2 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c @@ -0,0 +1,89 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + uint16_t BytesInTransfer = 0; + uint8_t ErrorCode; + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + { + Length -= *BytesProcessed; + TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed); + } + + while (Length) + { + if (!(Endpoint_IsReadWriteAllowed())) + { + TEMPLATE_CLEAR_ENDPOINT(); + + #if !defined(INTERRUPT_CONTROL_ENDPOINT) + USB_USBTask(); + #endif + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return ENDPOINT_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + } + else + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + BytesInTransfer++; + } + } + + return ENDPOINT_RWSTREAM_NoError; +} + +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_BUFFER_TYPE +#undef TEMPLATE_TRANSFER_BYTE +#undef TEMPLATE_CLEAR_ENDPOINT +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c new file mode 100644 index 0000000000..bb2a57fa52 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c @@ -0,0 +1,88 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + uint16_t BytesInTransfer = 0; + uint8_t ErrorCode; + + Pipe_SetPipeToken(TEMPLATE_TOKEN); + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + { + Length -= *BytesProcessed; + TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed); + } + + while (Length) + { + if (!(Pipe_IsReadWriteAllowed())) + { + TEMPLATE_CLEAR_PIPE(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return PIPE_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + } + else + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + BytesInTransfer++; + } + } + + return PIPE_RWSTREAM_NoError; +} + +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_BUFFER_TYPE +#undef TEMPLATE_TOKEN +#undef TEMPLATE_TRANSFER_BYTE +#undef TEMPLATE_CLEAR_PIPE +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c new file mode 100644 index 0000000000..92532ab00b --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c @@ -0,0 +1,273 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_AVR8) + +#define __INCLUDE_FROM_USB_DRIVER +#define __INCLUDE_FROM_USB_CONTROLLER_C +#include "../USBController.h" + +#if defined(USB_CAN_BE_BOTH) +volatile uint8_t USB_CurrentMode = USB_MODE_None; +#endif + +#if !defined(USE_STATIC_OPTIONS) +volatile uint8_t USB_Options; +#endif + +void USB_Init( + #if defined(USB_CAN_BE_BOTH) + const uint8_t Mode + #endif + + #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) + , + #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS)) + void + #endif + + #if !defined(USE_STATIC_OPTIONS) + const uint8_t Options + #endif + ) +{ + #if !defined(USE_STATIC_OPTIONS) + USB_Options = Options; + #endif + + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + /* Workaround for AVR8 bootloaders that fail to turn off the OTG pad before running + * the loaded application. This causes VBUS detection to fail unless we first force + * it off to reset it. */ + USB_OTGPAD_Off(); + #endif + + if (!(USB_Options & USB_OPT_REG_DISABLED)) + USB_REG_On(); + else + USB_REG_Off(); + + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + { + #if defined(USB_SERIES_4_AVR) + PLLFRQ = (1 << PDIV2); + #endif + } + + #if defined(USB_CAN_BE_BOTH) + if (Mode == USB_MODE_UID) + { + UHWCON |= (1 << UIDE); + USB_INT_Enable(USB_INT_IDTI); + USB_CurrentMode = USB_GetUSBModeFromUID(); + } + else + { + UHWCON &= ~(1 << UIDE); + USB_CurrentMode = Mode; + } + #endif + + USB_IsInitialized = true; + + USB_ResetInterface(); +} + +void USB_Disable(void) +{ + USB_INT_DisableAllInterrupts(); + USB_INT_ClearAllInterrupts(); + + USB_Detach(); + USB_Controller_Disable(); + + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + USB_PLL_Off(); + + if (!(USB_Options & USB_OPT_REG_KEEP_ENABLED)) + USB_REG_Off(); + + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + USB_OTGPAD_Off(); + #endif + + #if defined(USB_CAN_BE_BOTH) + USB_CurrentMode = USB_MODE_None; + #endif + + USB_IsInitialized = false; +} + +void USB_ResetInterface(void) +{ + #if defined(USB_CAN_BE_BOTH) + bool UIDModeSelectEnabled = ((UHWCON & (1 << UIDE)) != 0); + #endif + + USB_INT_DisableAllInterrupts(); + USB_INT_ClearAllInterrupts(); + + USB_Controller_Reset(); + + #if defined(USB_CAN_BE_BOTH) + if (UIDModeSelectEnabled) + USB_INT_Enable(USB_INT_IDTI); + #endif + + USB_CLK_Unfreeze(); + + if (USB_CurrentMode == USB_MODE_Device) + { + #if defined(USB_CAN_BE_DEVICE) + #if (defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + UHWCON |= (1 << UIMOD); + #endif + + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + { + #if defined(USB_SERIES_2_AVR) + USB_PLL_On(); + while (!(USB_PLL_IsReady())); + #else + USB_PLL_Off(); + #endif + } + + USB_Init_Device(); + #endif + } + else if (USB_CurrentMode == USB_MODE_Host) + { + #if defined(USB_CAN_BE_HOST) + UHWCON &= ~(1 << UIMOD); + + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + { + #if defined(USB_CAN_BE_HOST) + USB_PLL_On(); + while (!(USB_PLL_IsReady())); + #endif + } + + USB_Init_Host(); + #endif + } + + #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + USB_OTGPAD_On(); + #endif +} + +#if defined(USB_CAN_BE_DEVICE) +static void USB_Init_Device(void) +{ + USB_DeviceState = DEVICE_STATE_Unattached; + USB_Device_ConfigurationNumber = 0; + + #if !defined(NO_DEVICE_REMOTE_WAKEUP) + USB_Device_RemoteWakeupEnabled = false; + #endif + + #if !defined(NO_DEVICE_SELF_POWER) + USB_Device_CurrentlySelfPowered = false; + #endif + + #if !defined(FIXED_CONTROL_ENDPOINT_SIZE) + USB_Descriptor_Device_t* DeviceDescriptorPtr; + + #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \ + !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS)) + uint8_t DescriptorAddressSpace; + + if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr, &DescriptorAddressSpace) != NO_DESCRIPTOR) + { + if (DescriptorAddressSpace == MEMSPACE_FLASH) + USB_Device_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size); + else if (DescriptorAddressSpace == MEMSPACE_EEPROM) + USB_Device_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size); + else + USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size; + } + #else + if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR) + { + #if defined(USE_RAM_DESCRIPTORS) + USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size; + #elif defined(USE_EEPROM_DESCRIPTORS) + USB_Device_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size); + #else + USB_Device_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size); + #endif + } + #endif + #endif + + #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + if (USB_Options & USB_DEVICE_OPT_LOWSPEED) + USB_Device_SetLowSpeed(); + else + USB_Device_SetFullSpeed(); + + USB_INT_Enable(USB_INT_VBUSTI); + #endif + + Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, + USB_Device_ControlEndpointSize, 1); + + USB_INT_Clear(USB_INT_SUSPI); + USB_INT_Enable(USB_INT_SUSPI); + USB_INT_Enable(USB_INT_EORSTI); + + USB_Attach(); +} +#endif + +#if defined(USB_CAN_BE_HOST) +static void USB_Init_Host(void) +{ + USB_HostState = HOST_STATE_Unattached; + USB_Host_ConfigurationNumber = 0; + USB_Host_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE; + + USB_Host_HostMode_On(); + + USB_Host_VBUS_Auto_Off(); + USB_Host_VBUS_Manual_Enable(); + USB_Host_VBUS_Manual_On(); + + USB_INT_Enable(USB_INT_SRPI); + USB_INT_Enable(USB_INT_BCERRI); + + USB_Attach(); +} +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h new file mode 100644 index 0000000000..1b6e2ef43c --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h @@ -0,0 +1,432 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Controller definitions for the AVR8 microcontrollers. + * \copydetails Group_USBManagement_AVR8 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USBManagement + * \defgroup Group_USBManagement_AVR8 USB Interface Management (AVR8) + * \brief USB Controller definitions for the AVR8 microcontrollers. + * + * Functions, macros, variables, enums and types related to the setup and management of the USB interface. + * + * @{ + */ + +#ifndef __USBCONTROLLER_AVR8_H__ +#define __USBCONTROLLER_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBMode.h" + #include "../Events.h" + #include "../USBTask.h" + #include "../USBInterrupt.h" + + #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__) + #include "../Host.h" + #include "../OTG.h" + #include "../Pipe.h" + #include "../HostStandardReq.h" + #include "../PipeStream.h" + #endif + + #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) + #include "../Device.h" + #include "../Endpoint.h" + #include "../DeviceStandardReq.h" + #include "../EndpointStream.h" + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks and Defines: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + #if !defined(F_USB) + #error F_USB is not defined. You must define F_USB to the frequency of the unprescaled USB controller clock in your project makefile. + #endif + + #if (F_USB == 8000000) + #if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__) || \ + defined(__AVR_ATmega8U2__) || defined(__AVR_ATmega16U2__) || \ + defined(__AVR_ATmega32U2__)) + #define USB_PLL_PSC 0 + #elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) + #define USB_PLL_PSC 0 + #elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)) + #define USB_PLL_PSC ((1 << PLLP1) | (1 << PLLP0)) + #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__)) + #define USB_PLL_PSC ((1 << PLLP1) | (1 << PLLP0)) + #endif + #elif (F_USB == 16000000) + #if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__) || \ + defined(__AVR_ATmega8U2__) || defined(__AVR_ATmega16U2__) || \ + defined(__AVR_ATmega32U2__)) + #define USB_PLL_PSC (1 << PLLP0) + #elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) + #define USB_PLL_PSC (1 << PINDIV) + #elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__)) + #define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP1)) + #elif (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)) + #define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP0)) + #endif + #endif + + #if !defined(USB_PLL_PSC) + #error No PLL prescale value available for chosen F_USB value and AVR model. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name USB Controller Option Masks */ + //@{ + /** Regulator disable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad + * regulator should be disabled and the AVR's VCC level used for the data pads. + * + * \note See USB AVR data sheet for more information on the internal pad regulator. + */ + #define USB_OPT_REG_DISABLED (1 << 1) + + /** Regulator enable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad + * regulator should be enabled to regulate the data pin voltages from the VBUS level down to a level within + * the range allowable by the USB standard. + * + * \note See USB AVR data sheet for more information on the internal pad regulator. + */ + #define USB_OPT_REG_ENABLED (0 << 1) + + /** Option mask for \ref USB_Init() to keep regulator enabled at all times. Indicates that \ref USB_Disable() + * should not disable the regulator as it would otherwise. Has no effect if regulator is disabled using + * \ref USB_OPT_REG_DISABLED. + * + * \note See USB AVR data sheet for more information on the internal pad regulator. + */ + #define USB_OPT_REG_KEEP_ENABLED (1 << 3) + + /** Manual PLL control option mask for \ref USB_Init(). This indicates to the library that the user application + * will take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock + * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations. + */ + #define USB_OPT_MANUAL_PLL (1 << 2) + + /** Automatic PLL control option mask for \ref USB_Init(). This indicates to the library that the library should + * take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock + * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations. + */ + #define USB_OPT_AUTO_PLL (0 << 2) + //@} + + #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__) + /** Constant for the maximum software timeout period of the USB data stream transfer functions + * (both control and standard) when in either device or host mode. If the next packet of a stream + * is not received or acknowledged within this time period, the stream function will fail. + * + * This value may be overridden in the user project makefile as the value of the + * \ref USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch. + */ + #define USB_STREAM_TIMEOUT_MS 100 + #endif + + /* Inline Functions: */ + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__) + /** Determines if the VBUS line is currently high (i.e. the USB host is supplying power). + * + * \note This function is not available on some AVR models which do not support hardware VBUS monitoring. + * + * \return Boolean \c true if the VBUS line is currently detecting power from a host, \c false otherwise. + */ + static inline bool USB_VBUS_GetStatus(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_VBUS_GetStatus(void) + { + return ((USBSTA & (1 << VBUS)) ? true : false); + } + #endif + + /** Detaches the device from the USB bus. This has the effect of removing the device from any + * attached host, ceasing USB communications. If no host is present, this prevents any host from + * enumerating the device once attached until \ref USB_Attach() is called. + */ + static inline void USB_Detach(void) ATTR_ALWAYS_INLINE; + static inline void USB_Detach(void) + { + UDCON |= (1 << DETACH); + } + + /** Attaches the device to the USB bus. This announces the device's presence to any attached + * USB host, starting the enumeration process. If no host is present, attaching the device + * will allow for enumeration once a host is connected to the device. + * + * This is inexplicably also required for proper operation while in host mode, to enable the + * attachment of a device to the host. This is despite the bit being located in the device-mode + * register and despite the datasheet making no mention of its requirement in host mode. + */ + static inline void USB_Attach(void) ATTR_ALWAYS_INLINE; + static inline void USB_Attach(void) + { + UDCON &= ~(1 << DETACH); + } + + /* Function Prototypes: */ + /** Main function to initialize and start the USB interface. Once active, the USB interface will + * allow for device connection to a host when in device mode, or for device enumeration while in + * host mode. + * + * As the USB library relies on interrupts for the device and host mode enumeration processes, + * the user must enable global interrupts before or shortly after this function is called. In + * device mode, interrupts must be enabled within 500ms of this function being called to ensure + * that the host does not time out whilst enumerating the device. In host mode, interrupts may be + * enabled at the application's leisure however enumeration will not begin of an attached device + * until after this has occurred. + * + * Calling this function when the USB interface is already initialized will cause a complete USB + * interface reset and re-enumeration. + * + * \param[in] Mode Mask indicating what mode the USB interface is to be initialized to, a value + * from the \ref USB_Modes_t enum. + * \note This parameter does not exist on devices with only one supported USB + * mode (device or host). + * + * \param[in] Options Mask indicating the options which should be used when initializing the USB + * interface to control the USB interface's behavior. This should be comprised of + * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the + * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device + * mode speed. + * + * \note To reduce the FLASH requirements of the library if only device or host mode is required, + * the mode can be statically set in the project makefile by defining the token \c USB_DEVICE_ONLY + * (for device mode) or \c USB_HOST_ONLY (for host mode), passing the token to the compiler + * via the -D switch. If the mode is statically set, this parameter does not exist in the + * function prototype. + * \n\n + * + * \note To reduce the FLASH requirements of the library if only fixed settings are required, + * the options may be set statically in the same manner as the mode (see the Mode parameter of + * this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token, + * defined to the appropriate options masks. When the options are statically set, this + * parameter does not exist in the function prototype. + * \n\n + * + * \note The mode parameter does not exist on devices where only one mode is possible, such as USB + * AVR models which only implement the USB device mode in hardware. + * + * \see \ref Group_Device for the \c USB_DEVICE_OPT_* masks. + */ + void USB_Init( + #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) + const uint8_t Mode + #endif + + #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) || defined(__DOXYGEN__) + , + #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS)) + void + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + const uint8_t Options + #endif + ); + + /** Shuts down the USB interface. This turns off the USB interface after deallocating all USB FIFO + * memory, endpoints and pipes. When turned off, no USB functionality can be used until the interface + * is restarted with the \ref USB_Init() function. + */ + void USB_Disable(void); + + /** Resets the interface, when already initialized. This will re-enumerate the device if already connected + * to a host, or re-enumerate an already attached device when in host mode. + */ + void USB_ResetInterface(void); + + /* Global Variables: */ + #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) + /** Indicates the mode that the USB interface is currently initialized to, a value from the + * \ref USB_Modes_t enum. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + * + * \note When the controller is initialized into UID auto-detection mode, this variable will hold the + * currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller + * is fixed into a specific mode (either through the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY compile time + * options, or a limitation of the USB controller in the chosen device model) this will evaluate to + * a constant of the appropriate value and will never evaluate to \ref USB_MODE_None even when the + * USB interface is not initialized. + */ + extern volatile uint8_t USB_CurrentMode; + #elif defined(USB_CAN_BE_HOST) + #define USB_CurrentMode USB_MODE_Host + #elif defined(USB_CAN_BE_DEVICE) + #define USB_CurrentMode USB_MODE_Device + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + /** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init() + * was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + extern volatile uint8_t USB_Options; + #elif defined(USE_STATIC_OPTIONS) + #define USB_Options USE_STATIC_OPTIONS + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_USB_CONTROLLER_C) + #if defined(USB_CAN_BE_DEVICE) + static void USB_Init_Device(void); + #endif + + #if defined(USB_CAN_BE_HOST) + static void USB_Init_Host(void); + #endif + #endif + + /* Inline Functions: */ + static inline void USB_PLL_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_PLL_On(void) + { + PLLCSR = USB_PLL_PSC; + PLLCSR = (USB_PLL_PSC | (1 << PLLE)); + } + + static inline void USB_PLL_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_PLL_Off(void) + { + PLLCSR = 0; + } + + static inline bool USB_PLL_IsReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_PLL_IsReady(void) + { + return ((PLLCSR & (1 << PLOCK)) ? true : false); + } + + static inline void USB_REG_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_REG_On(void) + { + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + UHWCON |= (1 << UVREGE); + #else + REGCR &= ~(1 << REGDIS); + #endif + } + + static inline void USB_REG_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_REG_Off(void) + { + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + UHWCON &= ~(1 << UVREGE); + #else + REGCR |= (1 << REGDIS); + #endif + } + + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + static inline void USB_OTGPAD_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTGPAD_On(void) + { + USBCON |= (1 << OTGPADE); + } + + static inline void USB_OTGPAD_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTGPAD_Off(void) + { + USBCON &= ~(1 << OTGPADE); + } + #endif + + static inline void USB_CLK_Freeze(void) ATTR_ALWAYS_INLINE; + static inline void USB_CLK_Freeze(void) + { + USBCON |= (1 << FRZCLK); + } + + static inline void USB_CLK_Unfreeze(void) ATTR_ALWAYS_INLINE; + static inline void USB_CLK_Unfreeze(void) + { + USBCON &= ~(1 << FRZCLK); + } + + static inline void USB_Controller_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Enable(void) + { + USBCON |= (1 << USBE); + } + + static inline void USB_Controller_Disable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Disable(void) + { + USBCON &= ~(1 << USBE); + } + + static inline void USB_Controller_Reset(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Reset(void) + { + USBCON &= ~(1 << USBE); + USBCON |= (1 << USBE); + } + + #if defined(USB_CAN_BE_BOTH) + static inline uint8_t USB_GetUSBModeFromUID(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t USB_GetUSBModeFromUID(void) + { + if (USBSTA & (1 << ID)) + return USB_MODE_Device; + else + return USB_MODE_Host; + } + #endif + + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c new file mode 100644 index 0000000000..fac4fb41ad --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c @@ -0,0 +1,279 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_AVR8) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBInterrupt.h" + +void USB_INT_DisableAllInterrupts(void) +{ + #if defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + USBCON &= ~((1 << VBUSTE) | (1 << IDTE)); + #elif defined(USB_SERIES_4_AVR) + USBCON &= ~(1 << VBUSTE); + #endif + + #if defined(USB_CAN_BE_BOTH) + OTGIEN = 0; + #endif + + #if defined(USB_CAN_BE_HOST) + UHIEN = 0; + #endif + + #if defined(USB_CAN_BE_DEVICE) + UDIEN = 0; + #endif +} + +void USB_INT_ClearAllInterrupts(void) +{ + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + USBINT = 0; + #endif + + #if defined(USB_CAN_BE_BOTH) + OTGINT = 0; + #endif + + #if defined(USB_CAN_BE_HOST) + UHINT = 0; + #endif + + #if defined(USB_CAN_BE_DEVICE) + UDINT = 0; + #endif +} + +ISR(USB_GEN_vect, ISR_BLOCK) +{ + #if defined(USB_CAN_BE_DEVICE) + #if !defined(NO_SOF_EVENTS) + if (USB_INT_HasOccurred(USB_INT_SOFI) && USB_INT_IsEnabled(USB_INT_SOFI)) + { + USB_INT_Clear(USB_INT_SOFI); + + EVENT_USB_Device_StartOfFrame(); + } + #endif + + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + if (USB_INT_HasOccurred(USB_INT_VBUSTI) && USB_INT_IsEnabled(USB_INT_VBUSTI)) + { + USB_INT_Clear(USB_INT_VBUSTI); + + if (USB_VBUS_GetStatus()) + { + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + { + USB_PLL_On(); + while (!(USB_PLL_IsReady())); + } + + USB_DeviceState = DEVICE_STATE_Powered; + EVENT_USB_Device_Connect(); + } + else + { + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + USB_PLL_Off(); + + USB_DeviceState = DEVICE_STATE_Unattached; + EVENT_USB_Device_Disconnect(); + } + } + #endif + + if (USB_INT_HasOccurred(USB_INT_SUSPI) && USB_INT_IsEnabled(USB_INT_SUSPI)) + { + USB_INT_Disable(USB_INT_SUSPI); + USB_INT_Enable(USB_INT_WAKEUPI); + + USB_CLK_Freeze(); + + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + USB_PLL_Off(); + + #if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT) + USB_DeviceState = DEVICE_STATE_Unattached; + EVENT_USB_Device_Disconnect(); + #else + USB_DeviceState = DEVICE_STATE_Suspended; + EVENT_USB_Device_Suspend(); + #endif + } + + if (USB_INT_HasOccurred(USB_INT_WAKEUPI) && USB_INT_IsEnabled(USB_INT_WAKEUPI)) + { + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + { + USB_PLL_On(); + while (!(USB_PLL_IsReady())); + } + + USB_CLK_Unfreeze(); + + USB_INT_Clear(USB_INT_WAKEUPI); + + USB_INT_Disable(USB_INT_WAKEUPI); + USB_INT_Enable(USB_INT_SUSPI); + + if (USB_Device_ConfigurationNumber) + USB_DeviceState = DEVICE_STATE_Configured; + else + USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Addressed : DEVICE_STATE_Powered; + + #if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT) + EVENT_USB_Device_Connect(); + #else + EVENT_USB_Device_WakeUp(); + #endif + } + + if (USB_INT_HasOccurred(USB_INT_EORSTI) && USB_INT_IsEnabled(USB_INT_EORSTI)) + { + USB_INT_Clear(USB_INT_EORSTI); + + USB_DeviceState = DEVICE_STATE_Default; + USB_Device_ConfigurationNumber = 0; + + USB_INT_Clear(USB_INT_SUSPI); + USB_INT_Disable(USB_INT_SUSPI); + USB_INT_Enable(USB_INT_WAKEUPI); + + Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, + USB_Device_ControlEndpointSize, 1); + + #if defined(INTERRUPT_CONTROL_ENDPOINT) + USB_INT_Enable(USB_INT_RXSTPI); + #endif + + EVENT_USB_Device_Reset(); + } + #endif + + #if defined(USB_CAN_BE_HOST) + #if !defined(NO_SOF_EVENTS) + if (USB_INT_HasOccurred(USB_INT_HSOFI) && USB_INT_IsEnabled(USB_INT_HSOFI)) + { + USB_INT_Clear(USB_INT_HSOFI); + + EVENT_USB_Host_StartOfFrame(); + } + #endif + + if (USB_INT_HasOccurred(USB_INT_DDISCI) && USB_INT_IsEnabled(USB_INT_DDISCI)) + { + USB_INT_Clear(USB_INT_DDISCI); + USB_INT_Clear(USB_INT_DCONNI); + USB_INT_Disable(USB_INT_DDISCI); + + EVENT_USB_Host_DeviceUnattached(); + + USB_ResetInterface(); + } + + if (USB_INT_HasOccurred(USB_INT_VBERRI) && USB_INT_IsEnabled(USB_INT_VBERRI)) + { + USB_INT_Clear(USB_INT_VBERRI); + + USB_Host_VBUS_Manual_Off(); + USB_Host_VBUS_Auto_Off(); + + EVENT_USB_Host_HostError(HOST_ERROR_VBusVoltageDip); + EVENT_USB_Host_DeviceUnattached(); + + USB_HostState = HOST_STATE_Unattached; + } + + if (USB_INT_HasOccurred(USB_INT_SRPI) && USB_INT_IsEnabled(USB_INT_SRPI)) + { + USB_INT_Clear(USB_INT_SRPI); + USB_INT_Disable(USB_INT_SRPI); + + EVENT_USB_Host_DeviceAttached(); + + USB_INT_Enable(USB_INT_DDISCI); + + USB_HostState = HOST_STATE_Powered; + } + + if (USB_INT_HasOccurred(USB_INT_BCERRI) && USB_INT_IsEnabled(USB_INT_BCERRI)) + { + USB_INT_Clear(USB_INT_BCERRI); + + EVENT_USB_Host_DeviceEnumerationFailed(HOST_ENUMERROR_NoDeviceDetected, 0); + EVENT_USB_Host_DeviceUnattached(); + + USB_ResetInterface(); + } + #endif + + #if defined(USB_CAN_BE_BOTH) + if (USB_INT_HasOccurred(USB_INT_IDTI) && USB_INT_IsEnabled(USB_INT_IDTI)) + { + USB_INT_Clear(USB_INT_IDTI); + + if (USB_DeviceState != DEVICE_STATE_Unattached) + EVENT_USB_Device_Disconnect(); + + if (USB_HostState != HOST_STATE_Unattached) + EVENT_USB_Host_DeviceUnattached(); + + USB_CurrentMode = USB_GetUSBModeFromUID(); + USB_ResetInterface(); + + EVENT_USB_UIDChange(); + } + #endif +} + +#if defined(INTERRUPT_CONTROL_ENDPOINT) && defined(USB_CAN_BE_DEVICE) +ISR(USB_COM_vect, ISR_BLOCK) +{ + uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint(); + + Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP); + USB_INT_Disable(USB_INT_RXSTPI); + + GlobalInterruptEnable(); + + USB_Device_ProcessControlRequest(); + + Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP); + USB_INT_Enable(USB_INT_RXSTPI); + Endpoint_SelectEndpoint(PrevSelectedEndpoint); +} +#endif + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h new file mode 100644 index 0000000000..1eeb019f20 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h @@ -0,0 +1,375 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Controller Interrupt definitions for the AVR8 microcontrollers. + * + * This file contains definitions required for the correct handling of low level USB service routine interrupts + * from the USB controller. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +#ifndef __USBINTERRUPT_AVR8_H__ +#define __USBINTERRUPT_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Enums: */ + enum USB_Interrupts_t + { + #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)) + USB_INT_VBUSTI = 0, + #endif + #if (defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)) + USB_INT_IDTI = 1, + #endif + #if (defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)) + USB_INT_WAKEUPI = 2, + USB_INT_SUSPI = 3, + USB_INT_EORSTI = 4, + USB_INT_SOFI = 5, + USB_INT_RXSTPI = 6, + #endif + #if (defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)) + USB_INT_HSOFI = 7, + USB_INT_DCONNI = 8, + USB_INT_DDISCI = 9, + USB_INT_RSTI = 10, + USB_INT_BCERRI = 11, + USB_INT_VBERRI = 12, + USB_INT_SRPI = 13, + #endif + }; + + /* Inline Functions: */ + static inline void USB_INT_Enable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE; + static inline void USB_INT_Enable(const uint8_t Interrupt) + { + switch (Interrupt) + { + #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + case USB_INT_VBUSTI: + USBCON |= (1 << VBUSTE); + break; + #endif + #if defined(USB_CAN_BE_BOTH) + case USB_INT_IDTI: + USBCON |= (1 << IDTE); + break; + #endif + #if defined(USB_CAN_BE_DEVICE) + case USB_INT_WAKEUPI: + UDIEN |= (1 << WAKEUPE); + break; + case USB_INT_SUSPI: + UDIEN |= (1 << SUSPE); + break; + case USB_INT_EORSTI: + UDIEN |= (1 << EORSTE); + break; + case USB_INT_SOFI: + UDIEN |= (1 << SOFE); + break; + case USB_INT_RXSTPI: + UEIENX |= (1 << RXSTPE); + break; + #endif + #if defined(USB_CAN_BE_HOST) + case USB_INT_HSOFI: + UHIEN |= (1 << HSOFE); + break; + case USB_INT_DCONNI: + UHIEN |= (1 << DCONNE); + break; + case USB_INT_DDISCI: + UHIEN |= (1 << DDISCE); + break; + case USB_INT_RSTI: + UHIEN |= (1 << RSTE); + break; + case USB_INT_BCERRI: + OTGIEN |= (1 << BCERRE); + break; + case USB_INT_VBERRI: + OTGIEN |= (1 << VBERRE); + break; + case USB_INT_SRPI: + OTGIEN |= (1 << SRPE); + break; + #endif + default: + break; + } + } + + static inline void USB_INT_Disable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE; + static inline void USB_INT_Disable(const uint8_t Interrupt) + { + switch (Interrupt) + { + #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + case USB_INT_VBUSTI: + USBCON &= ~(1 << VBUSTE); + break; + #endif + #if defined(USB_CAN_BE_BOTH) + case USB_INT_IDTI: + USBCON &= ~(1 << IDTE); + break; + #endif + #if defined(USB_CAN_BE_DEVICE) + case USB_INT_WAKEUPI: + UDIEN &= ~(1 << WAKEUPE); + break; + case USB_INT_SUSPI: + UDIEN &= ~(1 << SUSPE); + break; + case USB_INT_EORSTI: + UDIEN &= ~(1 << EORSTE); + break; + case USB_INT_SOFI: + UDIEN &= ~(1 << SOFE); + break; + case USB_INT_RXSTPI: + UEIENX &= ~(1 << RXSTPE); + break; + #endif + #if defined(USB_CAN_BE_HOST) + case USB_INT_HSOFI: + UHIEN &= ~(1 << HSOFE); + break; + case USB_INT_DCONNI: + UHIEN &= ~(1 << DCONNE); + break; + case USB_INT_DDISCI: + UHIEN &= ~(1 << DDISCE); + break; + case USB_INT_RSTI: + UHIEN &= ~(1 << RSTE); + break; + case USB_INT_BCERRI: + OTGIEN &= ~(1 << BCERRE); + break; + case USB_INT_VBERRI: + OTGIEN &= ~(1 << VBERRE); + break; + case USB_INT_SRPI: + OTGIEN &= ~(1 << SRPE); + break; + #endif + default: + break; + } + } + + static inline void USB_INT_Clear(const uint8_t Interrupt) ATTR_ALWAYS_INLINE; + static inline void USB_INT_Clear(const uint8_t Interrupt) + { + switch (Interrupt) + { + #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + case USB_INT_VBUSTI: + USBINT &= ~(1 << VBUSTI); + break; + #endif + #if defined(USB_CAN_BE_BOTH) + case USB_INT_IDTI: + USBINT &= ~(1 << IDTI); + break; + #endif + #if defined(USB_CAN_BE_DEVICE) + case USB_INT_WAKEUPI: + UDINT &= ~(1 << WAKEUPI); + break; + case USB_INT_SUSPI: + UDINT &= ~(1 << SUSPI); + break; + case USB_INT_EORSTI: + UDINT &= ~(1 << EORSTI); + break; + case USB_INT_SOFI: + UDINT &= ~(1 << SOFI); + break; + case USB_INT_RXSTPI: + UEINTX &= ~(1 << RXSTPI); + break; + #endif + #if defined(USB_CAN_BE_HOST) + case USB_INT_HSOFI: + UHINT &= ~(1 << HSOFI); + break; + case USB_INT_DCONNI: + UHINT &= ~(1 << DCONNI); + break; + case USB_INT_DDISCI: + UHINT &= ~(1 << DDISCI); + break; + case USB_INT_RSTI: + UHINT &= ~(1 << RSTI); + break; + case USB_INT_BCERRI: + OTGINT &= ~(1 << BCERRI); + break; + case USB_INT_VBERRI: + OTGINT &= ~(1 << VBERRI); + break; + case USB_INT_SRPI: + OTGINT &= ~(1 << SRPI); + break; + #endif + default: + break; + } + } + + static inline bool USB_INT_IsEnabled(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline bool USB_INT_IsEnabled(const uint8_t Interrupt) + { + switch (Interrupt) + { + #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + case USB_INT_VBUSTI: + return (USBCON & (1 << VBUSTE)); + #endif + #if defined(USB_CAN_BE_BOTH) + case USB_INT_IDTI: + return (USBCON & (1 << IDTE)); + #endif + #if defined(USB_CAN_BE_DEVICE) + case USB_INT_WAKEUPI: + return (UDIEN & (1 << WAKEUPE)); + case USB_INT_SUSPI: + return (UDIEN & (1 << SUSPE)); + case USB_INT_EORSTI: + return (UDIEN & (1 << EORSTE)); + case USB_INT_SOFI: + return (UDIEN & (1 << SOFE)); + case USB_INT_RXSTPI: + return (UEIENX & (1 << RXSTPE)); + #endif + #if defined(USB_CAN_BE_HOST) + case USB_INT_HSOFI: + return (UHIEN & (1 << HSOFE)); + case USB_INT_DCONNI: + return (UHIEN & (1 << DCONNE)); + case USB_INT_DDISCI: + return (UHIEN & (1 << DDISCE)); + case USB_INT_RSTI: + return (UHIEN & (1 << RSTE)); + case USB_INT_BCERRI: + return (OTGIEN & (1 << BCERRE)); + case USB_INT_VBERRI: + return (OTGIEN & (1 << VBERRE)); + case USB_INT_SRPI: + return (OTGIEN & (1 << SRPE)); + #endif + default: + return false; + } + } + + static inline bool USB_INT_HasOccurred(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline bool USB_INT_HasOccurred(const uint8_t Interrupt) + { + switch (Interrupt) + { + #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + case USB_INT_VBUSTI: + return (USBINT & (1 << VBUSTI)); + #endif + #if defined(USB_CAN_BE_BOTH) + case USB_INT_IDTI: + return (USBINT & (1 << IDTI)); + #endif + #if defined(USB_CAN_BE_DEVICE) + case USB_INT_WAKEUPI: + return (UDINT & (1 << WAKEUPI)); + case USB_INT_SUSPI: + return (UDINT & (1 << SUSPI)); + case USB_INT_EORSTI: + return (UDINT & (1 << EORSTI)); + case USB_INT_SOFI: + return (UDINT & (1 << SOFI)); + case USB_INT_RXSTPI: + return (UEINTX & (1 << RXSTPI)); + #endif + #if defined(USB_CAN_BE_HOST) + case USB_INT_HSOFI: + return (UHINT & (1 << HSOFI)); + case USB_INT_DCONNI: + return (UHINT & (1 << DCONNI)); + case USB_INT_DDISCI: + return (UHINT & (1 << DDISCI)); + case USB_INT_RSTI: + return (UHINT & (1 << RSTI)); + case USB_INT_BCERRI: + return (OTGINT & (1 << BCERRI)); + case USB_INT_VBERRI: + return (OTGINT & (1 << VBERRI)); + case USB_INT_SRPI: + return (OTGINT & (1 << SRPI)); + #endif + default: + return false; + } + } + + /* Includes: */ + #include "../USBMode.h" + #include "../Events.h" + #include "../USBController.h" + + /* Function Prototypes: */ + void USB_INT_ClearAllInterrupts(void); + void USB_INT_DisableAllInterrupts(void); + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/ConfigDescriptors.c b/lib/lufa/LUFA/Drivers/USB/Core/ConfigDescriptors.c new file mode 100644 index 0000000000..d540bcfb4f --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/ConfigDescriptors.c @@ -0,0 +1,146 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "ConfigDescriptors.h" + +#if defined(USB_CAN_BE_HOST) +uint8_t USB_Host_GetDeviceConfigDescriptor(const uint8_t ConfigNumber, + uint16_t* const ConfigSizePtr, + void* const BufferPtr, + const uint16_t BufferSize) +{ + uint8_t ErrorCode; + uint8_t ConfigHeader[sizeof(USB_Descriptor_Configuration_Header_t)]; + + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_GetDescriptor, + .wValue = ((DTYPE_Configuration << 8) | (ConfigNumber - 1)), + .wIndex = 0, + .wLength = sizeof(USB_Descriptor_Configuration_Header_t), + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + if ((ErrorCode = USB_Host_SendControlRequest(ConfigHeader)) != HOST_SENDCONTROL_Successful) + return ErrorCode; + + *ConfigSizePtr = le16_to_cpu(DESCRIPTOR_PCAST(ConfigHeader, USB_Descriptor_Configuration_Header_t)->TotalConfigurationSize); + + if (*ConfigSizePtr > BufferSize) + return HOST_GETCONFIG_BuffOverflow; + + USB_ControlRequest.wLength = *ConfigSizePtr; + + if ((ErrorCode = USB_Host_SendControlRequest(BufferPtr)) != HOST_SENDCONTROL_Successful) + return ErrorCode; + + if (DESCRIPTOR_TYPE(BufferPtr) != DTYPE_Configuration) + return HOST_GETCONFIG_InvalidData; + + return HOST_GETCONFIG_Successful; +} +#endif + +void USB_GetNextDescriptorOfType(uint16_t* const BytesRem, + void** const CurrConfigLoc, + const uint8_t Type) +{ + while (*BytesRem) + { + USB_GetNextDescriptor(BytesRem, CurrConfigLoc); + + if (DESCRIPTOR_TYPE(*CurrConfigLoc) == Type) + return; + } +} + +void USB_GetNextDescriptorOfTypeBefore(uint16_t* const BytesRem, + void** const CurrConfigLoc, + const uint8_t Type, + const uint8_t BeforeType) +{ + while (*BytesRem) + { + USB_GetNextDescriptor(BytesRem, CurrConfigLoc); + + if (DESCRIPTOR_TYPE(*CurrConfigLoc) == Type) + { + return; + } + else if (DESCRIPTOR_TYPE(*CurrConfigLoc) == BeforeType) + { + *BytesRem = 0; + return; + } + } +} + +void USB_GetNextDescriptorOfTypeAfter(uint16_t* const BytesRem, + void** const CurrConfigLoc, + const uint8_t Type, + const uint8_t AfterType) +{ + USB_GetNextDescriptorOfType(BytesRem, CurrConfigLoc, AfterType); + + if (*BytesRem) + USB_GetNextDescriptorOfType(BytesRem, CurrConfigLoc, Type); +} + +uint8_t USB_GetNextDescriptorComp(uint16_t* const BytesRem, + void** const CurrConfigLoc, + ConfigComparatorPtr_t const ComparatorRoutine) +{ + uint8_t ErrorCode; + + while (*BytesRem) + { + uint8_t* PrevDescLoc = *CurrConfigLoc; + uint16_t PrevBytesRem = *BytesRem; + + USB_GetNextDescriptor(BytesRem, CurrConfigLoc); + + if ((ErrorCode = ComparatorRoutine(*CurrConfigLoc)) != DESCRIPTOR_SEARCH_NotFound) + { + if (ErrorCode == DESCRIPTOR_SEARCH_Fail) + { + *CurrConfigLoc = PrevDescLoc; + *BytesRem = PrevBytesRem; + } + + return ErrorCode; + } + } + + return DESCRIPTOR_SEARCH_COMP_EndOfDescriptor; +} + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/ConfigDescriptors.h b/lib/lufa/LUFA/Drivers/USB/Core/ConfigDescriptors.h new file mode 100644 index 0000000000..5355ecfe6d --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/ConfigDescriptors.h @@ -0,0 +1,287 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Configuration Descriptor definitions. + * \copydetails Group_ConfigDescriptorParser + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_StdDescriptors + * \defgroup Group_ConfigDescriptorParser Configuration Descriptor Parser + * \brief USB Configuration Descriptor definitions. + * + * This section of the library gives a friendly API which can be used in host applications to easily + * parse an attached device's configuration descriptor so that endpoint, interface and other descriptor + * data can be extracted and used as needed. + * + * @{ + */ + +#ifndef __CONFIGDESCRIPTORS_H__ +#define __CONFIGDESCRIPTORS_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + #include "HostStandardReq.h" + #include "StdDescriptors.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Casts a pointer to a descriptor inside the configuration descriptor into a pointer to the given + * descriptor type. + * + * Usage Example: + * \code + * uint8_t* CurrDescriptor = &ConfigDescriptor[0]; // Pointing to the configuration header + * USB_Descriptor_Configuration_Header_t* ConfigHeaderPtr = DESCRIPTOR_PCAST(CurrDescriptor, + * USB_Descriptor_Configuration_Header_t); + * + * // Can now access elements of the configuration header struct using the -> indirection operator + * \endcode + */ + #define DESCRIPTOR_PCAST(DescriptorPtr, Type) ((Type*)(DescriptorPtr)) + + /** Casts a pointer to a descriptor inside the configuration descriptor into the given descriptor + * type (as an actual struct instance rather than a pointer to a struct). + * + * Usage Example: + * \code + * uint8_t* CurrDescriptor = &ConfigDescriptor[0]; // Pointing to the configuration header + * USB_Descriptor_Configuration_Header_t ConfigHeader = DESCRIPTOR_CAST(CurrDescriptor, + * USB_Descriptor_Configuration_Header_t); + * + * // Can now access elements of the configuration header struct using the . operator + * \endcode + */ + #define DESCRIPTOR_CAST(DescriptorPtr, Type) (*DESCRIPTOR_PCAST(DescriptorPtr, Type)) + + /** Returns the descriptor's type, expressed as the 8-bit type value in the header of the descriptor. + * This value's meaning depends on the descriptor's placement in the descriptor, but standard type + * values can be accessed in the \ref USB_DescriptorTypes_t enum. + */ + #define DESCRIPTOR_TYPE(DescriptorPtr) DESCRIPTOR_PCAST(DescriptorPtr, USB_Descriptor_Header_t)->Type + + /** Returns the descriptor's size, expressed as the 8-bit value indicating the number of bytes. */ + #define DESCRIPTOR_SIZE(DescriptorPtr) DESCRIPTOR_PCAST(DescriptorPtr, USB_Descriptor_Header_t)->Size + + /* Type Defines: */ + /** Type define for a Configuration Descriptor comparator function (function taking a pointer to an array + * of type void, returning a uint8_t value). + * + * \see \ref USB_GetNextDescriptorComp function for more details. + */ + typedef uint8_t (* ConfigComparatorPtr_t)(void*); + + /* Enums: */ + /** Enum for the possible return codes of the \ref USB_Host_GetDeviceConfigDescriptor() function. */ + enum USB_Host_GetConfigDescriptor_ErrorCodes_t + { + HOST_GETCONFIG_Successful = 0, /**< No error occurred while retrieving the configuration descriptor. */ + HOST_GETCONFIG_DeviceDisconnect = 1, /**< The attached device was disconnected while retrieving the configuration + * descriptor. + */ + HOST_GETCONFIG_PipeError = 2, /**< An error occurred in the pipe while sending the request. */ + HOST_GETCONFIG_SetupStalled = 3, /**< The attached device stalled the request to retrieve the configuration + * descriptor. + */ + HOST_GETCONFIG_SoftwareTimeOut = 4, /**< The request or data transfer timed out. */ + HOST_GETCONFIG_BuffOverflow = 5, /**< The device's configuration descriptor is too large to fit into the allocated + * buffer. + */ + HOST_GETCONFIG_InvalidData = 6, /**< The device returned invalid configuration descriptor data. */ + }; + + /** Enum for return values of a descriptor comparator function. */ + enum DSearch_Return_ErrorCodes_t + { + DESCRIPTOR_SEARCH_Found = 0, /**< Current descriptor matches comparator criteria. */ + DESCRIPTOR_SEARCH_Fail = 1, /**< No further descriptor could possibly match criteria, fail the search. */ + DESCRIPTOR_SEARCH_NotFound = 2, /**< Current descriptor does not match comparator criteria. */ + }; + + /** Enum for return values of \ref USB_GetNextDescriptorComp(). */ + enum DSearch_Comp_Return_ErrorCodes_t + { + DESCRIPTOR_SEARCH_COMP_Found = 0, /**< Configuration descriptor now points to descriptor which matches + * search criteria of the given comparator function. */ + DESCRIPTOR_SEARCH_COMP_Fail = 1, /**< Comparator function returned \ref DESCRIPTOR_SEARCH_Fail. */ + DESCRIPTOR_SEARCH_COMP_EndOfDescriptor = 2, /**< End of configuration descriptor reached before match found. */ + }; + + /* Function Prototypes: */ + /** Retrieves the configuration descriptor data from an attached device via a standard request into a buffer, + * including validity and size checking to prevent a buffer overflow. + * + * \param[in] ConfigNumber Device configuration descriptor number to fetch from the device (usually set to 1 for + * single configuration devices). + * \param[in,out] ConfigSizePtr Pointer to a location for storing the retrieved configuration descriptor size. + * \param[out] BufferPtr Pointer to the buffer for storing the configuration descriptor data. + * \param[out] BufferSize Size of the allocated buffer where the configuration descriptor is to be stored. + * + * \return A value from the \ref USB_Host_GetConfigDescriptor_ErrorCodes_t enum. + */ + uint8_t USB_Host_GetDeviceConfigDescriptor(const uint8_t ConfigNumber, + uint16_t* const ConfigSizePtr, + void* const BufferPtr, + const uint16_t BufferSize) ATTR_NON_NULL_PTR_ARG(2) ATTR_NON_NULL_PTR_ARG(3); + + /** Skips to the next sub-descriptor inside the configuration descriptor of the specified type value. + * The bytes remaining value is automatically decremented. + * + * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor. + * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor. + * \param[in] Type Descriptor type value to search for. + */ + void USB_GetNextDescriptorOfType(uint16_t* const BytesRem, + void** const CurrConfigLoc, + const uint8_t Type) + ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + + /** Skips to the next sub-descriptor inside the configuration descriptor of the specified type value, + * which must come before a descriptor of the second given type value. If the BeforeType type + * descriptor is reached first, the number of bytes remaining to process is set to zero and the + * function exits. The bytes remaining value is automatically decremented. + * + * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor. + * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor. + * \param[in] Type Descriptor type value to search for. + * \param[in] BeforeType Descriptor type value which must not be reached before the given Type descriptor. + */ + void USB_GetNextDescriptorOfTypeBefore(uint16_t* const BytesRem, + void** const CurrConfigLoc, + const uint8_t Type, + const uint8_t BeforeType) + ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + + /** Skips to the next sub-descriptor inside the configuration descriptor of the specified type value, + * which must come after a descriptor of the second given type value. The bytes remaining value is + * automatically decremented. + * + * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor. + * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor. + * \param[in] Type Descriptor type value to search for. + * \param[in] AfterType Descriptor type value which must be reached before the given Type descriptor. + */ + void USB_GetNextDescriptorOfTypeAfter(uint16_t* const BytesRem, + void** const CurrConfigLoc, + const uint8_t Type, + const uint8_t AfterType) + ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + + /** Searches for the next descriptor in the given configuration descriptor using a pre-made comparator + * function. The routine updates the position and remaining configuration descriptor bytes values + * automatically. If a comparator routine fails a search, the descriptor pointer is retreated back + * so that the next descriptor search invocation will start from the descriptor which first caused the + * original search to fail. This behavior allows for one comparator to be used immediately after another + * has failed, starting the second search from the descriptor which failed the first. + * + * Comparator functions should be standard functions which accept a pointer to the header of the current + * descriptor inside the configuration descriptor which is being compared, and should return a value from + * the \ref DSearch_Return_ErrorCodes_t enum as a uint8_t value. + * + * \note This function is available in USB Host mode only. + * + * \param[in,out] BytesRem Pointer to an int storing the remaining bytes in the configuration descriptor. + * \param[in,out] CurrConfigLoc Pointer to the current position in the configuration descriptor. + * \param[in] ComparatorRoutine Name of the comparator search function to use on the configuration descriptor. + * + * \return Value of one of the members of the \ref DSearch_Comp_Return_ErrorCodes_t enum. + * + * Usage Example: + * \code + * uint8_t EndpointSearcher(void* CurrentDescriptor); // Comparator Prototype + * + * uint8_t EndpointSearcher(void* CurrentDescriptor) + * { + * if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Endpoint) + * return DESCRIPTOR_SEARCH_Found; + * else + * return DESCRIPTOR_SEARCH_NotFound; + * } + * + * //... + * + * // After retrieving configuration descriptor: + * if (USB_Host_GetNextDescriptorComp(&BytesRemaining, &CurrentConfigLoc, EndpointSearcher) == + * Descriptor_Search_Comp_Found) + * { + * // Do something with the endpoint descriptor + * } + * \endcode + */ + uint8_t USB_GetNextDescriptorComp(uint16_t* const BytesRem, + void** const CurrConfigLoc, + ConfigComparatorPtr_t const ComparatorRoutine) ATTR_NON_NULL_PTR_ARG(1) + ATTR_NON_NULL_PTR_ARG(2) ATTR_NON_NULL_PTR_ARG(3); + + /* Inline Functions: */ + /** Skips over the current sub-descriptor inside the configuration descriptor, so that the pointer then + points to the next sub-descriptor. The bytes remaining value is automatically decremented. + * + * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor. + * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor. + */ + static inline void USB_GetNextDescriptor(uint16_t* const BytesRem, + void** CurrConfigLoc) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + static inline void USB_GetNextDescriptor(uint16_t* const BytesRem, + void** CurrConfigLoc) + { + uint16_t CurrDescriptorSize = DESCRIPTOR_CAST(*CurrConfigLoc, USB_Descriptor_Header_t).Size; + + if (*BytesRem < CurrDescriptorSize) + CurrDescriptorSize = *BytesRem; + + *CurrConfigLoc = (void*)((uintptr_t)*CurrConfigLoc + CurrDescriptorSize); + *BytesRem -= CurrDescriptorSize; + } + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/Device.h b/lib/lufa/LUFA/Drivers/USB/Core/Device.h new file mode 100644 index 0000000000..81b0e17028 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/Device.h @@ -0,0 +1,159 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Common USB Device definitions for all architectures. + * \copydetails Group_Device + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_Device Device Management + * \brief USB Device management definitions for USB device mode. + * + * USB Device mode related definitions common to all architectures. This module contains definitions which + * are used when the USB controller is initialized in device mode. + * + * @{ + */ + +#ifndef __USBDEVICE_H__ +#define __USBDEVICE_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + #include "StdDescriptors.h" + #include "USBInterrupt.h" + #include "Endpoint.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Enums: */ + /** Enum for the various states of the USB Device state machine. Only some states are + * implemented in the LUFA library - other states are left to the user to implement. + * + * For information on each possible USB device state, refer to the USB 2.0 specification. + * + * \see \ref USB_DeviceState, which stores the current device state machine state. + */ + enum USB_Device_States_t + { + DEVICE_STATE_Unattached = 0, /**< Internally implemented by the library. This state indicates + * that the device is not currently connected to a host. + */ + DEVICE_STATE_Powered = 1, /**< Internally implemented by the library. This state indicates + * that the device is connected to a host, but enumeration has not + * yet begun. + */ + DEVICE_STATE_Default = 2, /**< Internally implemented by the library. This state indicates + * that the device's USB bus has been reset by the host and it is + * now waiting for the host to begin the enumeration process. + */ + DEVICE_STATE_Addressed = 3, /**< Internally implemented by the library. This state indicates + * that the device has been addressed by the USB Host, but is not + * yet configured. + */ + DEVICE_STATE_Configured = 4, /**< May be implemented by the user project. This state indicates + * that the device has been enumerated by the host and is ready + * for USB communications to begin. + */ + DEVICE_STATE_Suspended = 5, /**< May be implemented by the user project. This state indicates + * that the USB bus has been suspended by the host, and the device + * should power down to a minimal power level until the bus is + * resumed. + */ + }; + + /* Function Prototypes: */ + /** Function to retrieve a given descriptor's size and memory location from the given descriptor type value, + * index and language ID. This function MUST be overridden in the user application (added with full, identical + * prototype and name so that the library can call it to retrieve descriptor data. + * + * \param[in] wValue The type of the descriptor to retrieve in the upper byte, and the index in the + * lower byte (when more than one descriptor of the given type exists, such as the + * case of string descriptors). The type may be one of the standard types defined + * in the DescriptorTypes_t enum, or may be a class-specific descriptor type value. + * \param[in] wIndex The language ID of the string to return if the \c wValue type indicates + * \ref DTYPE_String, otherwise zero for standard descriptors, or as defined in a + * class-specific standards. + * \param[out] DescriptorAddress Pointer to the descriptor in memory. This should be set by the routine to + * the address of the descriptor. + * \param[out] DescriptorMemorySpace A value from the \ref USB_DescriptorMemorySpaces_t enum to indicate the memory + * space in which the descriptor is stored. This parameter does not exist when one + * of the \c USE_*_DESCRIPTORS compile time options is used, or on architectures which + * use a unified address space. + * + * \note By default, the library expects all descriptors to be located in flash memory via the \c PROGMEM attribute. + * If descriptors should be located in RAM or EEPROM instead (to speed up access in the case of RAM, or to + * allow the descriptors to be changed dynamically at runtime) either the \c USE_RAM_DESCRIPTORS or the + * \c USE_EEPROM_DESCRIPTORS tokens may be defined in the project makefile and passed to the compiler by the -D + * switch. + * + * \return Size in bytes of the descriptor if it exists, zero or \ref NO_DESCRIPTOR otherwise. + */ + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint16_t wIndex, + const void** const DescriptorAddress + #if (defined(ARCH_HAS_MULTI_ADDRESS_SPACE) || defined(__DOXYGEN__)) && \ + !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS)) + , uint8_t* const DescriptorMemorySpace + #endif + ) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); + + /* Architecture Includes: */ + #if (ARCH == ARCH_AVR8) + #include "AVR8/Device_AVR8.h" + #elif (ARCH == ARCH_UC3) + #include "UC3/Device_UC3.h" + #elif (ARCH == ARCH_XMEGA) + #include "XMEGA/Device_XMEGA.h" + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/DeviceStandardReq.c b/lib/lufa/LUFA/Drivers/USB/Core/DeviceStandardReq.c new file mode 100644 index 0000000000..feb092dbf7 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/DeviceStandardReq.c @@ -0,0 +1,393 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#define __INCLUDE_FROM_DEVICESTDREQ_C +#include "DeviceStandardReq.h" + +uint8_t USB_Device_ConfigurationNumber; + +#if !defined(NO_DEVICE_SELF_POWER) +bool USB_Device_CurrentlySelfPowered; +#endif + +#if !defined(NO_DEVICE_REMOTE_WAKEUP) +bool USB_Device_RemoteWakeupEnabled; +#endif + +void USB_Device_ProcessControlRequest(void) +{ + #if defined(ARCH_BIG_ENDIAN) + USB_ControlRequest.bmRequestType = Endpoint_Read_8(); + USB_ControlRequest.bRequest = Endpoint_Read_8(); + USB_ControlRequest.wValue = Endpoint_Read_16_LE(); + USB_ControlRequest.wIndex = Endpoint_Read_16_LE(); + USB_ControlRequest.wLength = Endpoint_Read_16_LE(); + #else + uint8_t* RequestHeader = (uint8_t*)&USB_ControlRequest; + + for (uint8_t RequestHeaderByte = 0; RequestHeaderByte < sizeof(USB_Request_Header_t); RequestHeaderByte++) + *(RequestHeader++) = Endpoint_Read_8(); + #endif + + EVENT_USB_Device_ControlRequest(); + + if (Endpoint_IsSETUPReceived()) + { + uint8_t bmRequestType = USB_ControlRequest.bmRequestType; + + switch (USB_ControlRequest.bRequest) + { + case REQ_GetStatus: + if ((bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE)) || + (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_ENDPOINT))) + { + USB_Device_GetStatus(); + } + + break; + case REQ_ClearFeature: + case REQ_SetFeature: + if ((bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE)) || + (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT))) + { + USB_Device_ClearSetFeature(); + } + + break; + case REQ_SetAddress: + if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE)) + USB_Device_SetAddress(); + + break; + case REQ_GetDescriptor: + if ((bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE)) || + (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE))) + { + USB_Device_GetDescriptor(); + } + + break; + case REQ_GetConfiguration: + if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE)) + USB_Device_GetConfiguration(); + + break; + case REQ_SetConfiguration: + if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE)) + USB_Device_SetConfiguration(); + + break; + + default: + break; + } + } + + if (Endpoint_IsSETUPReceived()) + { + Endpoint_ClearSETUP(); + Endpoint_StallTransaction(); + } +} + +static void USB_Device_SetAddress(void) +{ + uint8_t DeviceAddress = (USB_ControlRequest.wValue & 0x7F); + + USB_Device_SetDeviceAddress(DeviceAddress); + + Endpoint_ClearSETUP(); + + Endpoint_ClearStatusStage(); + + while (!(Endpoint_IsINReady())); + + USB_Device_EnableDeviceAddress(DeviceAddress); + + USB_DeviceState = (DeviceAddress) ? DEVICE_STATE_Addressed : DEVICE_STATE_Default; +} + +static void USB_Device_SetConfiguration(void) +{ + #if defined(FIXED_NUM_CONFIGURATIONS) + if ((uint8_t)USB_ControlRequest.wValue > FIXED_NUM_CONFIGURATIONS) + return; + #else + USB_Descriptor_Device_t* DevDescriptorPtr; + + #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) + #if defined(USE_FLASH_DESCRIPTORS) + #define MemoryAddressSpace MEMSPACE_FLASH + #elif defined(USE_EEPROM_DESCRIPTORS) + #define MemoryAddressSpace MEMSPACE_EEPROM + #elif defined(USE_RAM_DESCRIPTORS) + #define MemoryAddressSpace MEMSPACE_RAM + #else + uint8_t MemoryAddressSpace; + #endif + #endif + + if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DevDescriptorPtr + #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \ + !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS)) + , &MemoryAddressSpace + #endif + ) == NO_DESCRIPTOR) + { + return; + } + + #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) + if (MemoryAddressSpace == MEMSPACE_FLASH) + { + if (((uint8_t)USB_ControlRequest.wValue > pgm_read_byte(&DevDescriptorPtr->NumberOfConfigurations))) + return; + } + else if (MemoryAddressSpace == MEMSPACE_EEPROM) + { + if (((uint8_t)USB_ControlRequest.wValue > eeprom_read_byte(&DevDescriptorPtr->NumberOfConfigurations))) + return; + } + else + { + if ((uint8_t)USB_ControlRequest.wValue > DevDescriptorPtr->NumberOfConfigurations) + return; + } + #else + if ((uint8_t)USB_ControlRequest.wValue > DevDescriptorPtr->NumberOfConfigurations) + return; + #endif + #endif + + Endpoint_ClearSETUP(); + + USB_Device_ConfigurationNumber = (uint8_t)USB_ControlRequest.wValue; + + Endpoint_ClearStatusStage(); + + if (USB_Device_ConfigurationNumber) + USB_DeviceState = DEVICE_STATE_Configured; + else + USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Configured : DEVICE_STATE_Powered; + + EVENT_USB_Device_ConfigurationChanged(); +} + +static void USB_Device_GetConfiguration(void) +{ + Endpoint_ClearSETUP(); + + Endpoint_Write_8(USB_Device_ConfigurationNumber); + Endpoint_ClearIN(); + + Endpoint_ClearStatusStage(); +} + +#if !defined(NO_INTERNAL_SERIAL) && (USE_INTERNAL_SERIAL != NO_DESCRIPTOR) +static void USB_Device_GetInternalSerialDescriptor(void) +{ + struct + { + USB_Descriptor_Header_t Header; + uint16_t UnicodeString[INTERNAL_SERIAL_LENGTH_BITS / 4]; + } SignatureDescriptor; + + SignatureDescriptor.Header.Type = DTYPE_String; + SignatureDescriptor.Header.Size = USB_STRING_LEN(INTERNAL_SERIAL_LENGTH_BITS / 4); + + USB_Device_GetSerialString(SignatureDescriptor.UnicodeString); + + Endpoint_ClearSETUP(); + + Endpoint_Write_Control_Stream_LE(&SignatureDescriptor, sizeof(SignatureDescriptor)); + Endpoint_ClearOUT(); +} +#endif + +static void USB_Device_GetDescriptor(void) +{ + const void* DescriptorPointer; + uint16_t DescriptorSize; + + #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \ + !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS)) + uint8_t DescriptorAddressSpace; + #endif + + #if !defined(NO_INTERNAL_SERIAL) && (USE_INTERNAL_SERIAL != NO_DESCRIPTOR) + if (USB_ControlRequest.wValue == ((DTYPE_String << 8) | USE_INTERNAL_SERIAL)) + { + USB_Device_GetInternalSerialDescriptor(); + return; + } + #endif + + if ((DescriptorSize = CALLBACK_USB_GetDescriptor(USB_ControlRequest.wValue, USB_ControlRequest.wIndex, + &DescriptorPointer + #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \ + !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS)) + , &DescriptorAddressSpace + #endif + )) == NO_DESCRIPTOR) + { + return; + } + + Endpoint_ClearSETUP(); + + #if defined(USE_RAM_DESCRIPTORS) || !defined(ARCH_HAS_MULTI_ADDRESS_SPACE) + Endpoint_Write_Control_Stream_LE(DescriptorPointer, DescriptorSize); + #elif defined(USE_EEPROM_DESCRIPTORS) + Endpoint_Write_Control_EStream_LE(DescriptorPointer, DescriptorSize); + #elif defined(USE_FLASH_DESCRIPTORS) + Endpoint_Write_Control_PStream_LE(DescriptorPointer, DescriptorSize); + #else + if (DescriptorAddressSpace == MEMSPACE_FLASH) + Endpoint_Write_Control_PStream_LE(DescriptorPointer, DescriptorSize); + else if (DescriptorAddressSpace == MEMSPACE_EEPROM) + Endpoint_Write_Control_EStream_LE(DescriptorPointer, DescriptorSize); + else + Endpoint_Write_Control_Stream_LE(DescriptorPointer, DescriptorSize); + #endif + + Endpoint_ClearOUT(); +} + +static void USB_Device_GetStatus(void) +{ + uint8_t CurrentStatus = 0; + + switch (USB_ControlRequest.bmRequestType) + { + case (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE): + { + #if !defined(NO_DEVICE_SELF_POWER) + if (USB_Device_CurrentlySelfPowered) + CurrentStatus |= FEATURE_SELFPOWERED_ENABLED; + #endif + + #if !defined(NO_DEVICE_REMOTE_WAKEUP) + if (USB_Device_RemoteWakeupEnabled) + CurrentStatus |= FEATURE_REMOTE_WAKEUP_ENABLED; + #endif + break; + } + case (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_ENDPOINT): + { + #if !defined(CONTROL_ONLY_DEVICE) + uint8_t EndpointIndex = ((uint8_t)USB_ControlRequest.wIndex & ENDPOINT_EPNUM_MASK); + + if (EndpointIndex >= ENDPOINT_TOTAL_ENDPOINTS) + return; + + Endpoint_SelectEndpoint(EndpointIndex); + + CurrentStatus = Endpoint_IsStalled(); + + Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP); + #endif + + break; + } + default: + return; + } + + Endpoint_ClearSETUP(); + + Endpoint_Write_16_LE(CurrentStatus); + Endpoint_ClearIN(); + + Endpoint_ClearStatusStage(); +} + +static void USB_Device_ClearSetFeature(void) +{ + switch (USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) + { + #if !defined(NO_DEVICE_REMOTE_WAKEUP) + case REQREC_DEVICE: + { + if ((uint8_t)USB_ControlRequest.wValue == FEATURE_SEL_DeviceRemoteWakeup) + USB_Device_RemoteWakeupEnabled = (USB_ControlRequest.bRequest == REQ_SetFeature); + else + return; + + break; + } + #endif + #if !defined(CONTROL_ONLY_DEVICE) + case REQREC_ENDPOINT: + { + if ((uint8_t)USB_ControlRequest.wValue == FEATURE_SEL_EndpointHalt) + { + uint8_t EndpointIndex = ((uint8_t)USB_ControlRequest.wIndex & ENDPOINT_EPNUM_MASK); + + if (EndpointIndex == ENDPOINT_CONTROLEP || EndpointIndex >= ENDPOINT_TOTAL_ENDPOINTS) + return; + + Endpoint_SelectEndpoint(EndpointIndex); + + if (Endpoint_IsEnabled()) + { + if (USB_ControlRequest.bRequest == REQ_SetFeature) + { + Endpoint_StallTransaction(); + } + else + { + Endpoint_ClearStall(); + Endpoint_ResetEndpoint(EndpointIndex); + Endpoint_ResetDataToggle(); + } + } + } + + break; + } + #endif + default: + return; + } + + Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP); + + Endpoint_ClearSETUP(); + + Endpoint_ClearStatusStage(); +} + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/DeviceStandardReq.h b/lib/lufa/LUFA/Drivers/USB/Core/DeviceStandardReq.h new file mode 100644 index 0000000000..14badcda1f --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/DeviceStandardReq.h @@ -0,0 +1,158 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB device standard request management. + * + * This file contains the function prototypes necessary for the processing of incoming standard control requests + * when the library is in USB device mode. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +#ifndef __DEVICESTDREQ_H__ +#define __DEVICESTDREQ_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + #include "StdDescriptors.h" + #include "Events.h" + #include "StdRequestType.h" + #include "USBTask.h" + #include "USBController.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Enums: */ + #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) || defined(__DOXYGEN__) + /** Enum for the possible descriptor memory spaces, for the \c MemoryAddressSpace parameter of the + * \ref CALLBACK_USB_GetDescriptor() function. This can be used when none of the \c USE_*_DESCRIPTORS + * compile time options are used, to indicate in which memory space the descriptor is stored. + * + * \ingroup Group_Device + */ + enum USB_DescriptorMemorySpaces_t + { + #if defined(ARCH_HAS_FLASH_ADDRESS_SPACE) || defined(__DOXYGEN__) + MEMSPACE_FLASH = 0, /**< Indicates the requested descriptor is located in FLASH memory. */ + #endif + #if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE) || defined(__DOXYGEN__) + MEMSPACE_EEPROM = 1, /**< Indicates the requested descriptor is located in EEPROM memory. */ + #endif + MEMSPACE_RAM = 2, /**< Indicates the requested descriptor is located in RAM memory. */ + }; + #endif + + /* Global Variables: */ + /** Indicates the currently set configuration number of the device. USB devices may have several + * different configurations which the host can select between; this indicates the currently selected + * value, or 0 if no configuration has been selected. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + * + * \ingroup Group_Device + */ + extern uint8_t USB_Device_ConfigurationNumber; + + #if !defined(NO_DEVICE_REMOTE_WAKEUP) + /** Indicates if the host is currently allowing the device to issue remote wakeup events. If this + * flag is cleared, the device should not issue remote wakeup events to the host. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + * + * \note To reduce FLASH usage of the compiled applications where Remote Wakeup is not supported, + * this global and the underlying management code can be disabled by defining the + * \c NO_DEVICE_REMOTE_WAKEUP token in the project makefile and passing it to the compiler via + * the -D switch. + * + * \ingroup Group_Device + */ + extern bool USB_Device_RemoteWakeupEnabled; + #endif + + #if !defined(NO_DEVICE_SELF_POWER) + /** Indicates if the device is currently being powered by its own power supply, rather than being + * powered by the host's USB supply. This flag should remain cleared if the device does not + * support self powered mode, as indicated in the device descriptors. + * + * \ingroup Group_Device + */ + extern bool USB_Device_CurrentlySelfPowered; + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + #if defined(USE_RAM_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS) + #error USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive. + #elif defined(USE_RAM_DESCRIPTORS) && defined(USE_FLASH_DESCRIPTORS) + #error USE_RAM_DESCRIPTORS and USE_FLASH_DESCRIPTORS are mutually exclusive. + #elif defined(USE_FLASH_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS) + #error USE_FLASH_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive. + #elif defined(USE_FLASH_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS) && defined(USE_RAM_DESCRIPTORS) + #error Only one of the USE_*_DESCRIPTORS modes should be selected. + #endif + + /* Function Prototypes: */ + void USB_Device_ProcessControlRequest(void); + + #if defined(__INCLUDE_FROM_DEVICESTDREQ_C) + static void USB_Device_SetAddress(void); + static void USB_Device_SetConfiguration(void); + static void USB_Device_GetConfiguration(void); + static void USB_Device_GetDescriptor(void); + static void USB_Device_GetStatus(void); + static void USB_Device_ClearSetFeature(void); + + #if !defined(NO_INTERNAL_SERIAL) && (USE_INTERNAL_SERIAL != NO_DESCRIPTOR) + static void USB_Device_GetInternalSerialDescriptor(void); + #endif + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/Endpoint.h b/lib/lufa/LUFA/Drivers/USB/Core/Endpoint.h new file mode 100644 index 0000000000..b577f63476 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/Endpoint.h @@ -0,0 +1,130 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Endpoint definitions for all architectures. + * \copydetails Group_EndpointManagement + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_EndpointManagement + * \defgroup Group_EndpointRW Endpoint Data Reading and Writing + * \brief Endpoint data read/write definitions. + * + * Functions, macros, variables, enums and types related to data reading and writing from and to endpoints. + */ + +/** \ingroup Group_EndpointRW + * \defgroup Group_EndpointPrimitiveRW Read/Write of Primitive Data Types + * \brief Endpoint data primitive read/write definitions. + * + * Functions, macros, variables, enums and types related to data reading and writing of primitive data types + * from and to endpoints. + */ + +/** \ingroup Group_EndpointManagement + * \defgroup Group_EndpointPacketManagement Endpoint Packet Management + * \brief USB Endpoint package management definitions. + * + * Functions, macros, variables, enums and types related to packet management of endpoints. + */ + +/** \ingroup Group_USB + * \defgroup Group_EndpointManagement Endpoint Management + * \brief Endpoint management definitions. + * + * Functions, macros and enums related to endpoint management when in USB Device mode. This + * module contains the endpoint management macros, as well as endpoint interrupt and data + * send/receive functions for various data types. + * + * @{ + */ + +#ifndef __ENDPOINT_H__ +#define __ENDPOINT_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Type Defines: */ + /** Type define for a endpoint table entry, used to configure endpoints in groups via + * \ref Endpoint_ConfigureEndpointTable(). + */ + typedef struct + { + uint8_t Address; /**< Address of the endpoint to configure, or zero if the table entry is to be unused. */ + uint16_t Size; /**< Size of the endpoint bank, in bytes. */ + uint8_t Type; /**< Type of the endpoint, a \c EP_TYPE_* mask. */ + uint8_t Banks; /**< Number of hardware banks to use for the endpoint. */ + } USB_Endpoint_Table_t; + + /* Macros: */ + /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's + * numerical address in the device. + */ + #define ENDPOINT_EPNUM_MASK 0x0F + + /** Endpoint address for the default control endpoint, which always resides in address 0. This is + * defined for convenience to give more readable code when used with the endpoint macros. + */ + #define ENDPOINT_CONTROLEP 0 + + /* Architecture Includes: */ + #if (ARCH == ARCH_AVR8) + #include "AVR8/Endpoint_AVR8.h" + #elif (ARCH == ARCH_UC3) + #include "UC3/Endpoint_UC3.h" + #elif (ARCH == ARCH_XMEGA) + #include "XMEGA/Endpoint_XMEGA.h" + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/EndpointStream.h b/lib/lufa/LUFA/Drivers/USB/Core/EndpointStream.h new file mode 100644 index 0000000000..156d155b3d --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/EndpointStream.h @@ -0,0 +1,124 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Endpoint data stream transmission and reception management. + * \copydetails Group_EndpointStreamRW + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_EndpointRW + * \defgroup Group_EndpointStreamRW Read/Write of Multi-Byte Streams + * \brief Endpoint data stream transmission and reception management. + * + * Functions, macros, variables, enums and types related to data reading and writing of data streams from + * and to endpoints. + * + * @{ + */ + +#ifndef __ENDPOINT_STREAM_H__ +#define __ENDPOINT_STREAM_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Enums: */ + /** Enum for the possible error return codes of the \c Endpoint_*_Stream_* functions. */ + enum Endpoint_Stream_RW_ErrorCodes_t + { + ENDPOINT_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */ + ENDPOINT_RWSTREAM_EndpointStalled = 1, /**< The endpoint was stalled during the stream + * transfer by the host or device. + */ + ENDPOINT_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during + * the transfer. + */ + ENDPOINT_RWSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and + * no USB endpoint traffic can occur until the bus + * has resumed. + */ + ENDPOINT_RWSTREAM_Timeout = 4, /**< The host failed to accept or send the next packet + * within the software timeout period set by the + * \ref USB_STREAM_TIMEOUT_MS macro. + */ + ENDPOINT_RWSTREAM_IncompleteTransfer = 5, /**< Indicates that the endpoint bank became full or empty before + * the complete contents of the current stream could be + * transferred. The endpoint stream function should be called + * again to process the next chunk of data in the transfer. + */ + }; + + /** Enum for the possible error return codes of the \c Endpoint_*_Control_Stream_* functions. */ + enum Endpoint_ControlStream_RW_ErrorCodes_t + { + ENDPOINT_RWCSTREAM_NoError = 0, /**< Command completed successfully, no error. */ + ENDPOINT_RWCSTREAM_HostAborted = 1, /**< The aborted the transfer prematurely. */ + ENDPOINT_RWCSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during + * the transfer. + */ + ENDPOINT_RWCSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and + * no USB endpoint traffic can occur until the bus + * has resumed. + */ + }; + + /* Architecture Includes: */ + #if (ARCH == ARCH_AVR8) + #include "AVR8/EndpointStream_AVR8.h" + #elif (ARCH == ARCH_UC3) + #include "UC3/EndpointStream_UC3.h" + #elif (ARCH == ARCH_XMEGA) + #include "XMEGA/EndpointStream_XMEGA.h" + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/Events.c b/lib/lufa/LUFA/Drivers/USB/Core/Events.c new file mode 100644 index 0000000000..186557956a --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/Events.c @@ -0,0 +1,39 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_EVENTS_C +#define __INCLUDE_FROM_USB_DRIVER +#include "Events.h" + +void USB_Event_Stub(void) +{ + +} + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/Events.h b/lib/lufa/LUFA/Drivers/USB/Core/Events.h new file mode 100644 index 0000000000..57fd0d9af7 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/Events.h @@ -0,0 +1,372 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Event management definitions. + * \copydetails Group_Events + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_Events USB Events + * \brief USB Event management definitions. + * + * This module contains macros and functions relating to the management of library events, which are small + * pieces of code similar to ISRs which are run when a given condition is met. Each event can be fired from + * multiple places in the user or library code, which may or may not be inside an ISR, thus each handler + * should be written to be as small and fast as possible to prevent possible problems. + * + * Events can be hooked by the user application by declaring a handler function with the same name and parameters + * listed here. If an event with no user-associated handler is fired within the library, it by default maps to an + * internal empty stub function. + * + * Each event must only have one associated event handler, but can be raised by multiple sources by calling the + * event handler function (with any required event parameters). + * + * @{ + */ + +#ifndef __USBEVENTS_H__ +#define __USBEVENTS_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Pseudo-Functions for Doxygen: */ + #if !defined(__INCLUDE_FROM_EVENTS_C) || defined(__DOXYGEN__) + /** Event for USB mode pin level change. This event fires when the USB interface is set to dual role + * mode, and the UID pin level has changed to indicate a new mode (device or host). This event fires + * before the mode is switched to the newly indicated mode but after the \ref EVENT_USB_Device_Disconnect + * event has fired (if disconnected before the role change). + * + * \note This event only exists on microcontrollers that support dual role USB modes. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY tokens have been supplied + * to the compiler (see \ref Group_USBManagement documentation). + */ + void EVENT_USB_UIDChange(void); + + /** Event for USB host error. This event fires when a hardware fault has occurred whilst the USB + * interface is in host mode. + * + * \param[in] ErrorCode Error code indicating the failure reason, a value in \ref USB_Host_ErrorCodes_t. + * + * \note This event only exists on microcontrollers that supports USB host mode. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); + + /** Event for USB device attachment. This event fires when a the USB interface is in host mode, and + * a USB device has been connected to the USB interface. This is interrupt driven, thus fires before + * the standard \ref EVENT_USB_Device_Connect() event and so can be used to programmatically start the USB + * management task to reduce CPU consumption. + * + * \note This event only exists on microcontrollers that supports USB host mode. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * + * \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage. + */ + void EVENT_USB_Host_DeviceAttached(void); + + /** Event for USB device removal. This event fires when a the USB interface is in host mode, and + * a USB device has been removed the USB interface whether or not it has been enumerated. This + * can be used to programmatically stop the USB management task to reduce CPU consumption. + * + * \note This event only exists on microcontrollers that supports USB host mode. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * + * \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage. + */ + void EVENT_USB_Host_DeviceUnattached(void); + + /** Event for USB device enumeration failure. This event fires when a the USB interface is + * in host mode, and an attached USB device has failed to enumerate completely. + * + * \param[in] ErrorCode Error code indicating the failure reason, a value in + * \ref USB_Host_EnumerationErrorCodes_t. + * + * \param[in] SubErrorCode Sub error code indicating the reason for failure - for example, if the + * ErrorCode parameter indicates a control error, this will give the error + * code returned by the \ref USB_Host_SendControlRequest() function. + * + * \note This event only exists on microcontrollers that supports USB host mode. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, + const uint8_t SubErrorCode); + + /** Event for USB device enumeration completion. This event fires when a the USB interface is + * in host mode and an attached USB device has been completely enumerated and is ready to be + * controlled by the user application. + * + * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around + * 1 second) when a transaction is waiting to be processed by the device will prevent break communications + * and cause the host to reset the USB bus. + * + * \note This event only exists on microcontrollers that supports USB host mode. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Host_DeviceEnumerationComplete(void); + + /** Event for USB Start Of Frame detection, when enabled. This event fires at the start of each USB + * frame, once per millisecond, and is synchronized to the USB bus. This can be used as an accurate + * millisecond timer source when the USB bus is not suspended while in host mode. + * + * This event is time-critical; it is run once per millisecond and thus long handlers will significantly + * degrade device performance. This event should only be enabled when needed to reduce device wake-ups. + * + * \note This event is not normally active - it must be manually enabled and disabled via the + * \ref USB_Host_EnableSOFEvents() and \ref USB_Host_DisableSOFEvents() commands after enumeration of + * a USB device. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Host_StartOfFrame(void); + + /** Event for USB device connection. This event fires when the microcontroller is in USB Device mode + * and the device is connected to a USB host, beginning the enumeration process measured by a rising + * level on the microcontroller's VBUS sense pin. + * + * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around + * two seconds) will prevent the device from enumerating correctly. + * + * \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers + * if \c NO_LIMITED_CONTROLLER_CONNECT is not defined. + * + * \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available. + * this means that the current connection state is derived from the bus suspension and wake up events by default, + * which is not always accurate (host may suspend the bus while still connected). If the actual connection state + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by + * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection + * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. + * \n\n + * + * \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage. + */ + void EVENT_USB_Device_Connect(void); + + /** Event for USB device disconnection. This event fires when the microcontroller is in USB Device mode and the device is + * disconnected from a host, measured by a falling level on the microcontroller's VBUS sense pin. + * + * \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers + * if \c NO_LIMITED_CONTROLLER_CONNECT is not defined. + * + * \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller. + * this means that the current connection state is derived from the bus suspension and wake up events by default, + * which is not always accurate (host may suspend the bus while still connected). If the actual connection state + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by + * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection + * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. + * \n\n + * + * \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage. + */ + void EVENT_USB_Device_Disconnect(void); + + /** Event for control requests. This event fires when a the USB host issues a control request + * to the mandatory device control endpoint (of address 0). This may either be a standard + * request that the library may have a handler code for internally, or a class specific request + * issued to the device which must be handled appropriately. If a request is not processed in the + * user application via this event, it will be passed to the library for processing internally + * if a suitable handler exists. + * + * This event is time-critical; each packet within the request transaction must be acknowledged or + * sent within 50ms or the host will abort the transfer. + * + * The library internally handles all standard control requests with the exceptions of SYNC FRAME, + * SET DESCRIPTOR and SET INTERFACE. These and all other non-standard control requests will be left + * for the user to process via this event if desired. If not handled in the user application or by + * the library internally, unknown requests are automatically STALLed. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * \n\n + * + * \note Requests should be handled in the same manner as described in the USB 2.0 Specification, + * or appropriate class specification. In all instances, the library has already read the + * request SETUP parameters into the \ref USB_ControlRequest structure which should then be used + * by the application to determine how to handle the issued request. + */ + void EVENT_USB_Device_ControlRequest(void); + + /** Event for USB configuration number changed. This event fires when a the USB host changes the + * selected configuration number while in device mode. This event should be hooked in device + * applications to create the endpoints and configure the device for the selected configuration. + * + * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around + * one second) will prevent the device from enumerating correctly. + * + * This event fires after the value of \ref USB_Device_ConfigurationNumber has been changed. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Device_ConfigurationChanged(void); + + /** Event for USB suspend. This event fires when a the USB host suspends the device by halting its + * transmission of Start Of Frame pulses to the device. This is generally hooked in order to move + * the device over to a low power state until the host wakes up the device. If the USB interface is + * enumerated with the \ref USB_OPT_AUTO_PLL option set, the library will automatically suspend the + * USB PLL before the event is fired to save power. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * \n\n + * + * \note This event does not exist on the microcontrollers with limited USB VBUS sensing abilities + * when the \c NO_LIMITED_CONTROLLER_CONNECT compile time token is not set - see + * \ref EVENT_USB_Device_Disconnect. + * + * \see \ref EVENT_USB_Device_WakeUp() event for accompanying Wake Up event. + */ + void EVENT_USB_Device_Suspend(void); + + /** Event for USB wake up. This event fires when a the USB interface is suspended while in device + * mode, and the host wakes up the device by supplying Start Of Frame pulses. This is generally + * hooked to pull the user application out of a low power state and back into normal operating + * mode. If the USB interface is enumerated with the \ref USB_OPT_AUTO_PLL option set, the library + * will automatically restart the USB PLL before the event is fired. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * \n\n + * + * \note This event does not exist on the microcontrollers with limited USB VBUS sensing abilities + * when the \c NO_LIMITED_CONTROLLER_CONNECT compile time token is not set - see + * \ref EVENT_USB_Device_Disconnect. + * + * \see \ref EVENT_USB_Device_Suspend() event for accompanying Suspend event. + */ + void EVENT_USB_Device_WakeUp(void); + + /** Event for USB interface reset. This event fires when the USB interface is in device mode, and + * a the USB host requests that the device reset its interface. This event fires after the control + * endpoint has been automatically configured by the library. + * + * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around + * two seconds) will prevent the device from enumerating correctly. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Device_Reset(void); + + /** Event for USB Start Of Frame detection, when enabled. This event fires at the start of each USB + * frame, once per millisecond, and is synchronized to the USB bus. This can be used as an accurate + * millisecond timer source when the USB bus is enumerated in device mode to a USB host. + * + * This event is time-critical; it is run once per millisecond and thus long handlers will significantly + * degrade device performance. This event should only be enabled when needed to reduce device wake-ups. + * + * \pre This event is not normally active - it must be manually enabled and disabled via the + * \ref USB_Device_EnableSOFEvents() and \ref USB_Device_DisableSOFEvents() commands after enumeration. + * \n\n + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Device_StartOfFrame(void); + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_EVENTS_C) + void USB_Event_Stub(void) ATTR_CONST; + + #if defined(USB_CAN_BE_BOTH) + void EVENT_USB_UIDChange(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + #endif + + #if defined(USB_CAN_BE_HOST) + void EVENT_USB_Host_HostError(const uint8_t ErrorCode) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_DeviceAttached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_DeviceUnattached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_DeviceEnumerationComplete(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, + const uint8_t SubErrorCode) + ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_StartOfFrame(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + #endif + + #if defined(USB_CAN_BE_DEVICE) + void EVENT_USB_Device_Connect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_Disconnect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_ControlRequest(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_ConfigurationChanged(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_Suspend(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_WakeUp(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_Reset(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_StartOfFrame(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + #endif + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/Host.h b/lib/lufa/LUFA/Drivers/USB/Core/Host.h new file mode 100644 index 0000000000..50410b2be8 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/Host.h @@ -0,0 +1,139 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Common USB Host definitions for all architectures. + * \copydetails Group_Host + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_Host Host Management + * \brief USB Host management definitions for USB host mode. + * + * USB Host mode related macros and enums. This module contains macros and enums which are used when + * the USB controller is initialized in host mode. + * + * @{ + */ + +#ifndef __USBHOST_H__ +#define __USBHOST_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Enums: */ + /** Enum for the various states of the USB Host state machine. + * + * For information on each possible USB host state, refer to the USB 2.0 specification. + * Several of the USB host states are broken up further into multiple smaller sub-states, + * so that they can be internally implemented inside the library in an efficient manner. + * + * \see \ref USB_HostState, which stores the current host state machine state. + */ + enum USB_Host_States_t + { + HOST_STATE_WaitForDevice = 0, /**< This state indicates that the stack is waiting for an interval + * to elapse before continuing with the next step of the device + * enumeration process. + */ + HOST_STATE_Unattached = 1, /**< This state indicates that the host state machine is waiting for + * a device to be attached so that it can start the enumeration process. + */ + HOST_STATE_Powered = 2, /**< This state indicates that a device has been attached, and the + * library's internals are being configured to begin the enumeration + * process. + */ + HOST_STATE_Powered_WaitForDeviceSettle = 3, /**< This state indicates that the stack is waiting for the initial + * settling period to elapse before beginning the enumeration process. + */ + HOST_STATE_Powered_WaitForConnect = 4, /**< This state indicates that the stack is waiting for a connection event + * from the USB controller to indicate a valid USB device has been attached + * to the bus and is ready to be enumerated. + */ + HOST_STATE_Powered_DoReset = 5, /**< This state indicates that a valid USB device has been attached, and that + * it will now be reset to ensure it is ready for enumeration. + */ + HOST_STATE_Powered_ConfigPipe = 6, /**< This state indicates that the attached device is currently powered and + * reset, and that the control pipe is now being configured by the stack. + */ + HOST_STATE_Default = 7, /**< This state indicates that the stack is currently retrieving the control + * endpoint's size from the device, so that the control pipe can be altered + * to match. + */ + HOST_STATE_Default_PostReset = 8, /**< This state indicates that the control pipe is being reconfigured to match + * the retrieved control endpoint size from the device, and the device's USB + * bus address is being set. + */ + HOST_STATE_Default_PostAddressSet = 9, /**< This state indicates that the device's address has now been set, and the + * stack is has now completed the device enumeration process. This state causes + * the stack to change the current USB device address to that set for the + * connected device, before progressing to the \ref HOST_STATE_Addressed state + * ready for use in the user application. + */ + HOST_STATE_Addressed = 10, /**< Indicates that the device has been enumerated and addressed, and is now waiting + * for the user application to configure the device ready for use. + */ + HOST_STATE_Configured = 11, /**< Indicates that the device has been configured into a valid device configuration, + * ready for general use by the user application. + */ + }; + + /* Architecture Includes: */ + #if (ARCH == ARCH_AVR8) + #include "AVR8/Host_AVR8.h" + #elif (ARCH == ARCH_UC3) + #include "UC3/Host_UC3.h" + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/HostStandardReq.c b/lib/lufa/LUFA/Drivers/USB/Core/HostStandardReq.c new file mode 100644 index 0000000000..42a934daa0 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/HostStandardReq.c @@ -0,0 +1,322 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#define __INCLUDE_FROM_HOSTSTDREQ_C +#include "HostStandardReq.h" + +uint8_t USB_Host_ConfigurationNumber; + +static uint8_t USB_Host_SendControlRequest_PRV(void* const BufferPtr) +{ + uint8_t* DataStream = (uint8_t*)BufferPtr; + uint8_t ReturnStatus = HOST_SENDCONTROL_Successful; + uint16_t DataLen = USB_ControlRequest.wLength; + + USB_Host_ResumeBus(); + + if ((ReturnStatus = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful) + return ReturnStatus; + + Pipe_SetPipeToken(PIPE_TOKEN_SETUP); + Pipe_ClearError(); + + Pipe_Unfreeze(); + + #if defined(ARCH_BIG_ENDIAN) + Pipe_Write_8(USB_ControlRequest.bmRequestType); + Pipe_Write_8(USB_ControlRequest.bRequest); + Pipe_Write_16_LE(USB_ControlRequest.wValue); + Pipe_Write_16_LE(USB_ControlRequest.wIndex); + Pipe_Write_16_LE(USB_ControlRequest.wLength); + #else + uint8_t* HeaderStream = (uint8_t*)&USB_ControlRequest; + + for (uint8_t HeaderByte = 0; HeaderByte < sizeof(USB_Request_Header_t); HeaderByte++) + Pipe_Write_8(*(HeaderStream++)); + #endif + + Pipe_ClearSETUP(); + + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_SetupSent)) != HOST_SENDCONTROL_Successful) + return ReturnStatus; + + Pipe_Freeze(); + + if ((ReturnStatus = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful) + return ReturnStatus; + + if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_DIRECTION) == REQDIR_DEVICETOHOST) + { + Pipe_SetPipeToken(PIPE_TOKEN_IN); + + if (DataStream != NULL) + { + while (DataLen) + { + Pipe_Unfreeze(); + + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_InReceived)) != HOST_SENDCONTROL_Successful) + return ReturnStatus; + + if (!(Pipe_BytesInPipe())) + DataLen = 0; + + while (Pipe_BytesInPipe() && DataLen) + { + *(DataStream++) = Pipe_Read_8(); + DataLen--; + } + + Pipe_Freeze(); + Pipe_ClearIN(); + } + } + + Pipe_SetPipeToken(PIPE_TOKEN_OUT); + Pipe_Unfreeze(); + + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful) + return ReturnStatus; + + Pipe_ClearOUT(); + + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful) + return ReturnStatus; + } + else + { + if (DataStream != NULL) + { + Pipe_SetPipeToken(PIPE_TOKEN_OUT); + Pipe_Unfreeze(); + + while (DataLen) + { + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful) + return ReturnStatus; + + while (DataLen && (Pipe_BytesInPipe() < USB_Host_ControlPipeSize)) + { + Pipe_Write_8(*(DataStream++)); + DataLen--; + } + + Pipe_ClearOUT(); + } + + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful) + return ReturnStatus; + + Pipe_Freeze(); + } + + Pipe_SetPipeToken(PIPE_TOKEN_IN); + Pipe_Unfreeze(); + + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_InReceived)) != HOST_SENDCONTROL_Successful) + return ReturnStatus; + + Pipe_ClearIN(); + } + + return ReturnStatus; +} + +static uint8_t USB_Host_WaitForIOS(const uint8_t WaitType) +{ + #if (USB_HOST_TIMEOUT_MS < 0xFF) + uint8_t TimeoutCounter = USB_HOST_TIMEOUT_MS; + #else + uint16_t TimeoutCounter = USB_HOST_TIMEOUT_MS; + #endif + + while (!(((WaitType == USB_HOST_WAITFOR_SetupSent) && Pipe_IsSETUPSent()) || + ((WaitType == USB_HOST_WAITFOR_InReceived) && Pipe_IsINReceived()) || + ((WaitType == USB_HOST_WAITFOR_OutReady) && Pipe_IsOUTReady()))) + { + uint8_t ErrorCode; + + if ((ErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful) + return ErrorCode; + + if (!(TimeoutCounter--)) + return HOST_SENDCONTROL_SoftwareTimeOut; + } + + return HOST_SENDCONTROL_Successful; +} + +uint8_t USB_Host_SendControlRequest(void* const BufferPtr) +{ + bool BusSuspended = USB_Host_IsBusSuspended(); + uint8_t ReturnStatus = USB_Host_SendControlRequest_PRV(BufferPtr); + + Pipe_Freeze(); + + if (BusSuspended) + USB_Host_SuspendBus(); + + Pipe_ResetPipe(PIPE_CONTROLPIPE); + + return ReturnStatus; +} + +uint8_t USB_Host_SetDeviceConfiguration(const uint8_t ConfigNumber) +{ + uint8_t ErrorCode; + + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_SetConfiguration, + .wValue = ConfigNumber, + .wIndex = 0, + .wLength = 0, + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + if ((ErrorCode = USB_Host_SendControlRequest(NULL)) == HOST_SENDCONTROL_Successful) + { + USB_Host_ConfigurationNumber = ConfigNumber; + USB_HostState = (ConfigNumber) ? HOST_STATE_Configured : HOST_STATE_Addressed; + } + + return ErrorCode; +} + +uint8_t USB_Host_GetDeviceConfiguration(uint8_t* const ConfigNumber) +{ + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_GetConfiguration, + .wValue = 0, + .wIndex = 0, + .wLength = sizeof(uint8_t), + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + return USB_Host_SendControlRequest(ConfigNumber); +} + +uint8_t USB_Host_GetDescriptor(const uint8_t Type, + const uint8_t Index, + void* const Buffer, + const uint8_t BufferLength) +{ + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_GetDescriptor, + .wValue = (((uint16_t)Type << 8) | Index), + .wIndex = 0, + .wLength = BufferLength, + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + return USB_Host_SendControlRequest(Buffer); +} + +uint8_t USB_Host_GetDeviceStatus(uint8_t* const FeatureStatus) +{ + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_GetStatus, + .wValue = 0, + .wIndex = 0, + .wLength = 0, + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + return USB_Host_SendControlRequest(FeatureStatus); +} + +uint8_t USB_Host_ClearEndpointStall(const uint8_t EndpointAddress) +{ + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT), + .bRequest = REQ_ClearFeature, + .wValue = FEATURE_SEL_EndpointHalt, + .wIndex = EndpointAddress, + .wLength = 0, + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + return USB_Host_SendControlRequest(NULL); +} + +uint8_t USB_Host_SetInterfaceAltSetting(const uint8_t InterfaceIndex, + const uint8_t AltSetting) +{ + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE), + .bRequest = REQ_SetInterface, + .wValue = AltSetting, + .wIndex = InterfaceIndex, + .wLength = 0, + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + return USB_Host_SendControlRequest(NULL); +} + +uint8_t USB_Host_GetInterfaceAltSetting(const uint8_t InterfaceIndex, + uint8_t* const AltSetting) +{ + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE), + .bRequest = REQ_GetInterface, + .wValue = 0, + .wIndex = InterfaceIndex, + .wLength = sizeof(uint8_t), + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + return USB_Host_SendControlRequest(AltSetting); +} + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/HostStandardReq.h b/lib/lufa/LUFA/Drivers/USB/Core/HostStandardReq.h new file mode 100644 index 0000000000..66542690ab --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/HostStandardReq.h @@ -0,0 +1,292 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB host standard request management. + * + * This file contains the function prototypes necessary for the issuing of outgoing standard control requests + * when the library is in USB host mode. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +#ifndef __HOSTSTDREQ_H__ +#define __HOSTSTDREQ_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + #include "StdRequestType.h" + #include "USBController.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + #if !defined(USB_HOST_TIMEOUT_MS) || defined(__DOXYGEN__) + /** Constant for the maximum software timeout period of sent USB control transactions to an attached + * device. If a device fails to respond to a sent control request within this period, the + * library will return a timeout error code. + * + * This value may be overridden in the user project makefile as the value of the + * \ref USB_HOST_TIMEOUT_MS token, and passed to the compiler using the -D switch. + */ + #define USB_HOST_TIMEOUT_MS 1000 + #endif + + /* Enums: */ + /** Enum for the \ref USB_Host_SendControlRequest() return code, indicating the reason for the error + * if the transfer of the request is unsuccessful. + * + * \ingroup Group_PipeControlReq + */ + enum USB_Host_SendControlErrorCodes_t + { + HOST_SENDCONTROL_Successful = 0, /**< No error occurred in the request transfer. */ + HOST_SENDCONTROL_DeviceDisconnected = 1, /**< The attached device was disconnected during the + * request transfer. + */ + HOST_SENDCONTROL_PipeError = 2, /**< An error occurred in the pipe while sending the request. */ + HOST_SENDCONTROL_SetupStalled = 3, /**< The attached device stalled the request, usually + * indicating that the request is unsupported on the device. + */ + HOST_SENDCONTROL_SoftwareTimeOut = 4, /**< The request or data transfer timed out. */ + }; + + /* Global Variables: */ + /** Indicates the currently set configuration number of the attached device. This indicates the currently + * selected configuration value if one has been set successfully, or 0 if no configuration has been selected. + * + * To set a device configuration, call the \ref USB_Host_SetDeviceConfiguration() function. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + * + * \ingroup Group_Host + */ + extern uint8_t USB_Host_ConfigurationNumber; + + /* Function Prototypes: */ + /** Sends the request stored in the \ref USB_ControlRequest global structure to the attached device, + * and transfers the data stored in the buffer to the device, or from the device to the buffer + * as requested. The transfer is made on the currently selected pipe. + * + * \ingroup Group_PipeControlReq + * + * \param[in] BufferPtr Pointer to the start of the data buffer if the request has a data stage, or + * \c NULL if the request transfers no data to or from the device. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_SendControlRequest(void* const BufferPtr); + + /** Sends a SET CONFIGURATION standard request to the attached device, with the given configuration index. + * + * This routine will automatically update the \ref USB_HostState and \ref USB_Host_ConfigurationNumber + * state variables according to the given function parameters and the result of the request. + * + * \note After this routine returns, the control pipe will be selected. + * + * \ingroup Group_PipeControlReq + * + * \param[in] ConfigNumber Configuration index to send to the device. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_SetDeviceConfiguration(const uint8_t ConfigNumber); + + /** Sends a GET CONFIGURATION standard request to the attached device, to retrieve the currently selected + * device configuration index. + * + * \note After this routine returns, the control pipe will be selected. + * + * \ingroup Group_PipeControlReq + * + * \param[out] ConfigNumber Pointer to a location where the retrieved configuration index should be stored. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_GetDeviceConfiguration(uint8_t* const ConfigNumber) ATTR_NON_NULL_PTR_ARG(1); + + /** Sends a GET DESCRIPTOR standard request to the attached device, requesting the descriptor of the + * specified type and index. + * + * \note After this routine returns, the control pipe will be selected. + * + * \ingroup Group_PipeControlReq + * + * \param[in] Type Type of descriptor to retrieve, a value from the \ref USB_DescriptorTypes_t enum. + * \param[in] Index Index of the descriptor to retrieve. + * \param[out] Buffer Pointer to the destination buffer where the retrieved string descriptor is to be stored. + * \param[in] BufferLength Maximum size of the string descriptor which can be stored into the buffer. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_GetDescriptor(const uint8_t Type, + const uint8_t Index, + void* const Buffer, + const uint8_t BufferLength) ATTR_NON_NULL_PTR_ARG(3); + + /** Retrieves the current feature status of the attached device, via a GET STATUS standard request. The + * retrieved feature status can then be examined by masking the retrieved value with the various + * \c FEATURE_* masks for bus/self power information and remote wakeup support. + * + * \note After this routine returns, the control pipe will be selected. + * + * \ingroup Group_PipeControlReq + * + * \param[out] FeatureStatus Location where the retrieved feature status should be stored. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_GetDeviceStatus(uint8_t* const FeatureStatus) ATTR_NON_NULL_PTR_ARG(1); + + /** Clears a stall condition on the given pipe, via a CLEAR FEATURE standard request to the attached device. + * + * \note After this routine returns, the control pipe will be selected. + * + * \ingroup Group_PipeControlReq + * + * \param[in] EndpointAddress Address of the endpoint to clear, including the endpoint's direction. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_ClearEndpointStall(const uint8_t EndpointAddress); + + /** Selects a given alternative setting for the specified interface, via a SET INTERFACE standard request to + * the attached device. + * + * \note After this routine returns, the control pipe will be selected. + * + * \ingroup Group_PipeControlReq + * + * \param[in] InterfaceIndex Index of the interface whose alternative setting is to be altered. + * \param[in] AltSetting Index of the interface's alternative setting which is to be selected. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_SetInterfaceAltSetting(const uint8_t InterfaceIndex, + const uint8_t AltSetting); + + + /** Retrieves the current alternative setting for the specified interface, via a GET INTERFACE standard request to + * the attached device. + * + * \note After this routine returns, the control pipe will be selected. + * + * \ingroup Group_PipeControlReq + * + * \param[in] InterfaceIndex Index of the interface whose alternative setting is to be altered. + * \param[out] AltSetting Pointer to a location where the retrieved alternative setting value should be stored. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_GetInterfaceAltSetting(const uint8_t InterfaceIndex, + uint8_t* const AltSetting) ATTR_NON_NULL_PTR_ARG(2); + + /* Inline Functions: */ + /** Sends a GET DESCRIPTOR standard request to the attached device, requesting the device descriptor. + * This can be used to easily retrieve information about the device such as its VID, PID and power + * requirements. This is a convenience wrapper for \ref USB_Host_GetDescriptor(). + * + * \note After this routine returns, the control pipe will be selected. + * + * \ingroup Group_PipeControlReq + * + * \param[out] DeviceDescriptorPtr Pointer to the destination device descriptor structure where + * the read data is to be stored. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + static inline uint8_t USB_Host_GetDeviceDescriptor(USB_Descriptor_Device_t* const DeviceDescriptorPtr) ATTR_NON_NULL_PTR_ARG(1); + static inline uint8_t USB_Host_GetDeviceDescriptor(USB_Descriptor_Device_t* const DeviceDescriptorPtr) + { + return USB_Host_GetDescriptor(DTYPE_Device, 0, DeviceDescriptorPtr, sizeof(USB_Descriptor_Device_t)); + } + + /** Sends a GET DESCRIPTOR standard request to the attached device, requesting the string descriptor + * of the specified index. This can be used to easily retrieve string descriptors from the device by + * index, after the index is obtained from the Device or Configuration descriptors. This is a convenience + * wrapper for \ref USB_Host_GetDescriptor(). + * + * \note After this routine returns, the control pipe will be selected. + * + * \ingroup Group_PipeControlReq + * + * \param[in] Index Index of the string descriptor to retrieve. + * \param[out] Buffer Pointer to the destination buffer where the retrieved string descriptor is + * to be stored. + * \param[in] BufferLength Maximum size of the string descriptor which can be stored into the buffer. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + static inline uint8_t USB_Host_GetDeviceStringDescriptor(const uint8_t Index, + void* const Buffer, + const uint8_t BufferLength) ATTR_NON_NULL_PTR_ARG(2); + static inline uint8_t USB_Host_GetDeviceStringDescriptor(const uint8_t Index, + void* const Buffer, + const uint8_t BufferLength) + { + return USB_Host_GetDescriptor(DTYPE_String, Index, Buffer, BufferLength); + } + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Enums: */ + enum USB_WaitForTypes_t + { + USB_HOST_WAITFOR_SetupSent, + USB_HOST_WAITFOR_InReceived, + USB_HOST_WAITFOR_OutReady, + }; + + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_HOSTSTDREQ_C) + static uint8_t USB_Host_SendControlRequest_PRV(void* const BufferPtr); + static uint8_t USB_Host_WaitForIOS(const uint8_t WaitType); + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/OTG.h b/lib/lufa/LUFA/Drivers/USB/Core/OTG.h new file mode 100644 index 0000000000..6293e4cacd --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/OTG.h @@ -0,0 +1,80 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Common USB OTG definitions for all architectures. + * \copydetails Group_OTG + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_OTG USB On The Go (OTG) Management + * \brief USB OTG management definitions. + * + * This module contains macros for embedded USB hosts with dual role On The Go capabilities, for managing role + * exchange. OTG is a way for two USB dual role devices to talk to one another directly without fixed device/host + * roles. + * + * @{ + */ + +#ifndef __USBOTG_H__ +#define __USBOTG_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Architecture Includes: */ + #if (ARCH == ARCH_AVR8) + #include "AVR8/OTG_AVR8.h" + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/Pipe.h b/lib/lufa/LUFA/Drivers/USB/Core/Pipe.h new file mode 100644 index 0000000000..0697078d01 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/Pipe.h @@ -0,0 +1,144 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Common USB Pipe definitions for all architectures. + * \copydetails Group_PipeManagement + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_PipeManagement + * \defgroup Group_PipeRW Pipe Data Reading and Writing + * \brief Pipe data read/write definitions. + * + * Functions, macros, variables, enums and types related to data reading and writing from and to pipes. + */ + +/** \ingroup Group_PipeRW + * \defgroup Group_PipePrimitiveRW Read/Write of Primitive Data Types + * \brief Pipe data primitive read/write definitions. + * + * Functions, macros, variables, enums and types related to data reading and writing of primitive data types + * from and to pipes. + */ + +/** \ingroup Group_PipeManagement + * \defgroup Group_PipePacketManagement Pipe Packet Management + * \brief Pipe packet management definitions. + * + * Functions, macros, variables, enums and types related to packet management of pipes. + */ + +/** \ingroup Group_PipeManagement + * \defgroup Group_PipeControlReq Pipe Control Request Management + * \brief Pipe control request definitions. + * + * Module for host mode request processing. This module allows for the transmission of standard, class and + * vendor control requests to the default control endpoint of an attached device while in host mode. + * + * \see Chapter 9 of the USB 2.0 specification. + */ + +/** \ingroup Group_USB + * \defgroup Group_PipeManagement Pipe Management + * \brief Pipe management definitions. + * + * This module contains functions, macros and enums related to pipe management when in USB Host mode. This + * module contains the pipe management macros, as well as pipe interrupt and data send/receive functions + * for various data types. + * + * @{ + */ + +#ifndef __PIPE_H__ +#define __PIPE_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Type Defines: */ + /** Type define for a pipe table entry, used to configure pipes in groups via + * \ref Pipe_ConfigurePipeTable(). + */ + typedef struct + { + uint8_t Address; /**< Address of the pipe to configure, or zero if the table entry is to be unused. */ + uint16_t Size; /**< Size of the pipe bank, in bytes. */ + uint8_t EndpointAddress; /**< Address of the endpoint in the connected device. */ + uint8_t Type; /**< Type of the endpoint, a \c EP_TYPE_* mask. */ + uint8_t Banks; /**< Number of hardware banks to use for the pipe. */ + } USB_Pipe_Table_t; + + /* Macros: */ + /** Pipe address for the default control pipe, which always resides in address 0. This is + * defined for convenience to give more readable code when used with the pipe macros. + */ + #define PIPE_CONTROLPIPE 0 + + /** Pipe number mask, for masking against pipe addresses to retrieve the pipe's numerical address + * in the device. + */ + #define PIPE_PIPENUM_MASK 0x0F + + /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's + * numerical address in the attached device. + */ + #define PIPE_EPNUM_MASK 0x0F + + /* Architecture Includes: */ + #if (ARCH == ARCH_AVR8) + #include "AVR8/Pipe_AVR8.h" + #elif (ARCH == ARCH_UC3) + #include "UC3/Pipe_UC3.h" + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/PipeStream.h b/lib/lufa/LUFA/Drivers/USB/Core/PipeStream.h new file mode 100644 index 0000000000..8785302847 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/PipeStream.h @@ -0,0 +1,100 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Pipe data stream transmission and reception management. + * \copydetails Group_PipeStreamRW + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_PipeRW + * \defgroup Group_PipeStreamRW Read/Write of Multi-Byte Streams + * \brief Pipe data stream transmission and reception management. + * + * Functions, macros, variables, enums and types related to data reading and writing of data streams from + * and to pipes. + * + * @{ + */ + +#ifndef __PIPE_STREAM_H__ +#define __PIPE_STREAM_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Enums: */ + /** Enum for the possible error return codes of the Pipe_*_Stream_* functions. */ + enum Pipe_Stream_RW_ErrorCodes_t + { + PIPE_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */ + PIPE_RWSTREAM_PipeStalled = 1, /**< The device stalled the pipe during the transfer. */ + PIPE_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during + * the transfer. + */ + PIPE_RWSTREAM_Timeout = 3, /**< The device failed to accept or send the next packet + * within the software timeout period set by the + * \ref USB_STREAM_TIMEOUT_MS macro. + */ + PIPE_RWSTREAM_IncompleteTransfer = 4, /**< Indicates that the pipe bank became full/empty before the + * complete contents of the stream could be transferred. + */ + }; + + /* Architecture Includes: */ + #if (ARCH == ARCH_AVR8) + #include "AVR8/PipeStream_AVR8.h" + #elif (ARCH == ARCH_UC3) + #include "UC3/PipeStream_UC3.h" + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/StdDescriptors.h b/lib/lufa/LUFA/Drivers/USB/Core/StdDescriptors.h new file mode 100644 index 0000000000..381c02c53f --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/StdDescriptors.h @@ -0,0 +1,765 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Common standard USB Descriptor definitions for all architectures. + * \copydetails Group_StdDescriptors + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_StdDescriptors USB Descriptors + * \brief Standard USB Descriptor definitions. + * + * Standard USB device descriptor defines and retrieval routines, for USB devices. This module contains + * structures and macros for the easy creation of standard USB descriptors in USB device projects. + * + * @{ + */ + +#ifndef __USBDESCRIPTORS_H__ +#define __USBDESCRIPTORS_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + #include "Events.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Indicates that a given descriptor does not exist in the device. This can be used inside descriptors + * for string descriptor indexes, or may be use as a return value for GetDescriptor when the specified + * descriptor does not exist. + */ + #define NO_DESCRIPTOR 0 + + /** Macro to calculate the power value for the configuration descriptor, from a given number of milliamperes. + * + * \param[in] mA Maximum number of milliamps the device consumes when the given configuration is selected. + */ + #define USB_CONFIG_POWER_MA(mA) ((mA) >> 1) + + /** Macro to calculate the Unicode length of a string with a given number of Unicode characters. + * Should be used in string descriptor's headers for giving the string descriptor's byte length. + * + * \param[in] UnicodeChars Number of Unicode characters in the string text. + */ + #define USB_STRING_LEN(UnicodeChars) (sizeof(USB_Descriptor_Header_t) + ((UnicodeChars) << 1)) + + /** Convenience macro to easily create \ref USB_Descriptor_String_t instances from a wide character string. + * + * \note This macro is for little-endian systems only. + * + * \param[in] String String to initialize a USB String Descriptor structure with. + */ + #define USB_STRING_DESCRIPTOR(String) { .Header = {.Size = sizeof(USB_Descriptor_Header_t) + (sizeof(String) - 2), .Type = DTYPE_String}, .UnicodeString = String } + + /** Convenience macro to easily create \ref USB_Descriptor_String_t instances from an array of characters. + * + * \param[in] ... Characters to initialize a USB String Descriptor structure with. + */ + #define USB_STRING_DESCRIPTOR_ARRAY(...) { .Header = {.Size = sizeof(USB_Descriptor_Header_t) + sizeof((uint16_t){__VA_ARGS__}), .Type = DTYPE_String}, .UnicodeString = {__VA_ARGS__} } + + /** Macro to encode a given major/minor/revision version number into Binary Coded Decimal format for descriptor + * fields requiring BCD encoding, such as the USB version number in the standard device descriptor. + * + * \note This value is automatically converted into Little Endian, suitable for direct use inside device + * descriptors on all architectures without endianness conversion macros. + * + * \param[in] Major Major version number to encode. + * \param[in] Minor Minor version number to encode. + * \param[in] Revision Revision version number to encode. + */ + #define VERSION_BCD(Major, Minor, Revision) \ + CPU_TO_LE16( ((Major & 0xFF) << 8) | \ + ((Minor & 0x0F) << 4) | \ + (Revision & 0x0F) ) + + /** String language ID for the English language. Should be used in \ref USB_Descriptor_String_t descriptors + * to indicate that the English language is supported by the device in its string descriptors. + */ + #define LANGUAGE_ID_ENG 0x0409 + + /** \name USB Configuration Descriptor Attribute Masks */ + //@{ + /** Mask for the reserved bit in the Configuration Descriptor's \c ConfigAttributes field, which must be set on all + * devices for historical purposes. + */ + #define USB_CONFIG_ATTR_RESERVED 0x80 + + /** Can be masked with other configuration descriptor attributes for a \ref USB_Descriptor_Configuration_Header_t + * descriptor's \c ConfigAttributes value to indicate that the specified configuration can draw its power + * from the device's own power source. + */ + #define USB_CONFIG_ATTR_SELFPOWERED 0x40 + + /** Can be masked with other configuration descriptor attributes for a \ref USB_Descriptor_Configuration_Header_t + * descriptor's \c ConfigAttributes value to indicate that the specified configuration supports the + * remote wakeup feature of the USB standard, allowing a suspended USB device to wake up the host upon + * request. + */ + #define USB_CONFIG_ATTR_REMOTEWAKEUP 0x20 + //@} + + /** \name Endpoint Descriptor Attribute Masks */ + //@{ + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * \c Attributes value to indicate that the specified endpoint is not synchronized. + * + * \see The USB specification for more details on the possible Endpoint attributes. + */ + #define ENDPOINT_ATTR_NO_SYNC (0 << 2) + + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * \c Attributes value to indicate that the specified endpoint is asynchronous. + * + * \see The USB specification for more details on the possible Endpoint attributes. + */ + #define ENDPOINT_ATTR_ASYNC (1 << 2) + + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * \c Attributes value to indicate that the specified endpoint is adaptive. + * + * \see The USB specification for more details on the possible Endpoint attributes. + */ + #define ENDPOINT_ATTR_ADAPTIVE (2 << 2) + + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * \c Attributes value to indicate that the specified endpoint is synchronized. + * + * \see The USB specification for more details on the possible Endpoint attributes. + */ + #define ENDPOINT_ATTR_SYNC (3 << 2) + //@} + + /** \name Endpoint Descriptor Usage Masks */ + //@{ + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * \c Attributes value to indicate that the specified endpoint is used for data transfers. + * + * \see The USB specification for more details on the possible Endpoint usage attributes. + */ + #define ENDPOINT_USAGE_DATA (0 << 4) + + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * \c Attributes value to indicate that the specified endpoint is used for feedback. + * + * \see The USB specification for more details on the possible Endpoint usage attributes. + */ + #define ENDPOINT_USAGE_FEEDBACK (1 << 4) + + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * \c Attributes value to indicate that the specified endpoint is used for implicit feedback. + * + * \see The USB specification for more details on the possible Endpoint usage attributes. + */ + #define ENDPOINT_USAGE_IMPLICIT_FEEDBACK (2 << 4) + //@} + + /* Enums: */ + /** Enum for the possible standard descriptor types, as given in each descriptor's header. */ + enum USB_DescriptorTypes_t + { + DTYPE_Device = 0x01, /**< Indicates that the descriptor is a device descriptor. */ + DTYPE_Configuration = 0x02, /**< Indicates that the descriptor is a configuration descriptor. */ + DTYPE_String = 0x03, /**< Indicates that the descriptor is a string descriptor. */ + DTYPE_Interface = 0x04, /**< Indicates that the descriptor is an interface descriptor. */ + DTYPE_Endpoint = 0x05, /**< Indicates that the descriptor is an endpoint descriptor. */ + DTYPE_DeviceQualifier = 0x06, /**< Indicates that the descriptor is a device qualifier descriptor. */ + DTYPE_Other = 0x07, /**< Indicates that the descriptor is of other type. */ + DTYPE_InterfacePower = 0x08, /**< Indicates that the descriptor is an interface power descriptor. */ + DTYPE_InterfaceAssociation = 0x0B, /**< Indicates that the descriptor is an interface association descriptor. */ + DTYPE_CSInterface = 0x24, /**< Indicates that the descriptor is a class specific interface descriptor. */ + DTYPE_CSEndpoint = 0x25, /**< Indicates that the descriptor is a class specific endpoint descriptor. */ + }; + + /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors. */ + enum USB_Descriptor_ClassSubclassProtocol_t + { + USB_CSCP_NoDeviceClass = 0x00, /**< Descriptor Class value indicating that the device does not belong + * to a particular class at the device level. + */ + USB_CSCP_NoDeviceSubclass = 0x00, /**< Descriptor Subclass value indicating that the device does not belong + * to a particular subclass at the device level. + */ + USB_CSCP_NoDeviceProtocol = 0x00, /**< Descriptor Protocol value indicating that the device does not belong + * to a particular protocol at the device level. + */ + USB_CSCP_VendorSpecificClass = 0xFF, /**< Descriptor Class value indicating that the device/interface belongs + * to a vendor specific class. + */ + USB_CSCP_VendorSpecificSubclass = 0xFF, /**< Descriptor Subclass value indicating that the device/interface belongs + * to a vendor specific subclass. + */ + USB_CSCP_VendorSpecificProtocol = 0xFF, /**< Descriptor Protocol value indicating that the device/interface belongs + * to a vendor specific protocol. + */ + USB_CSCP_IADDeviceClass = 0xEF, /**< Descriptor Class value indicating that the device belongs to the + * Interface Association Descriptor class. + */ + USB_CSCP_IADDeviceSubclass = 0x02, /**< Descriptor Subclass value indicating that the device belongs to the + * Interface Association Descriptor subclass. + */ + USB_CSCP_IADDeviceProtocol = 0x01, /**< Descriptor Protocol value indicating that the device belongs to the + * Interface Association Descriptor protocol. + */ + }; + + /* Type Defines: */ + /** \brief Standard USB Descriptor Header (LUFA naming conventions). + * + * Type define for all descriptors' standard header, indicating the descriptor's length and type. This structure + * uses LUFA-specific element names to make each element's purpose clearer. + * + * \see \ref USB_StdDescriptor_Header_t for the version of this type with standard element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + uint8_t Size; /**< Size of the descriptor, in bytes. */ + uint8_t Type; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value + * given by the specific class. + */ + } ATTR_PACKED USB_Descriptor_Header_t; + + /** \brief Standard USB Descriptor Header (USB-IF naming conventions). + * + * Type define for all descriptors' standard header, indicating the descriptor's length and type. This structure + * uses the relevant standard's given element names to ensure compatibility with the standard. + * + * \see \ref USB_Descriptor_Header_t for the version of this type with non-standard LUFA specific element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value + * given by the specific class. + */ + } ATTR_PACKED USB_StdDescriptor_Header_t; + + /** \brief Standard USB Device Descriptor (LUFA naming conventions). + * + * Type define for a standard Device Descriptor. This structure uses LUFA-specific element names to make each + * element's purpose clearer. + * + * \see \ref USB_StdDescriptor_Device_t for the version of this type with standard element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ + + uint16_t USBSpecification; /**< BCD of the supported USB specification. + * + * \see \ref VERSION_BCD() utility macro. + */ + uint8_t Class; /**< USB device class. */ + uint8_t SubClass; /**< USB device subclass. */ + uint8_t Protocol; /**< USB device protocol. */ + + uint8_t Endpoint0Size; /**< Size of the control (address 0) endpoint's bank in bytes. */ + + uint16_t VendorID; /**< Vendor ID for the USB product. */ + uint16_t ProductID; /**< Unique product ID for the USB product. */ + uint16_t ReleaseNumber; /**< Product release (version) number. + * + * \see \ref VERSION_BCD() utility macro. + */ + uint8_t ManufacturerStrIndex; /**< String index for the manufacturer's name. The + * host will request this string via a separate + * control request for the string descriptor. + * + * \note If no string supplied, use \ref NO_DESCRIPTOR. + */ + uint8_t ProductStrIndex; /**< String index for the product name/details. + * + * \see ManufacturerStrIndex structure entry. + */ + uint8_t SerialNumStrIndex; /**< String index for the product's globally unique hexadecimal + * serial number, in uppercase Unicode ASCII. + * + * \note On some microcontroller models, there is an embedded serial number + * in the chip which can be used for the device serial number. + * To use this serial number, set this to \c USE_INTERNAL_SERIAL. + * On unsupported devices, this will evaluate to \ref NO_DESCRIPTOR + * and will cause the host to generate a pseudo-unique value for the + * device upon insertion. + * + * \see \c ManufacturerStrIndex structure entry. + */ + uint8_t NumberOfConfigurations; /**< Total number of configurations supported by + * the device. + */ + } ATTR_PACKED USB_Descriptor_Device_t; + + /** \brief Standard USB Device Descriptor (USB-IF naming conventions). + * + * Type define for a standard Device Descriptor. This structure uses the relevant standard's given element names + * to ensure compatibility with the standard. + * + * \see \ref USB_Descriptor_Device_t for the version of this type with non-standard LUFA specific element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value + * given by the specific class. + */ + uint16_t bcdUSB; /**< BCD of the supported USB specification. + * + * \see \ref VERSION_BCD() utility macro. + */ + uint8_t bDeviceClass; /**< USB device class. */ + uint8_t bDeviceSubClass; /**< USB device subclass. */ + uint8_t bDeviceProtocol; /**< USB device protocol. */ + uint8_t bMaxPacketSize0; /**< Size of the control (address 0) endpoint's bank in bytes. */ + uint16_t idVendor; /**< Vendor ID for the USB product. */ + uint16_t idProduct; /**< Unique product ID for the USB product. */ + uint16_t bcdDevice; /**< Product release (version) number. + * + * \see \ref VERSION_BCD() utility macro. + */ + uint8_t iManufacturer; /**< String index for the manufacturer's name. The + * host will request this string via a separate + * control request for the string descriptor. + * + * \note If no string supplied, use \ref NO_DESCRIPTOR. + */ + uint8_t iProduct; /**< String index for the product name/details. + * + * \see ManufacturerStrIndex structure entry. + */ + uint8_t iSerialNumber; /**< String index for the product's globally unique hexadecimal + * serial number, in uppercase Unicode ASCII. + * + * \note On some microcontroller models, there is an embedded serial number + * in the chip which can be used for the device serial number. + * To use this serial number, set this to \c USE_INTERNAL_SERIAL. + * On unsupported devices, this will evaluate to \ref NO_DESCRIPTOR + * and will cause the host to generate a pseudo-unique value for the + * device upon insertion. + * + * \see \c ManufacturerStrIndex structure entry. + */ + uint8_t bNumConfigurations; /**< Total number of configurations supported by + * the device. + */ + } ATTR_PACKED USB_StdDescriptor_Device_t; + + /** \brief Standard USB Device Qualifier Descriptor (LUFA naming conventions). + * + * Type define for a standard Device Qualifier Descriptor. This structure uses LUFA-specific element names + * to make each element's purpose clearer. + * + * \see \ref USB_StdDescriptor_DeviceQualifier_t for the version of this type with standard element names. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ + + uint16_t USBSpecification; /**< BCD of the supported USB specification. + * + * \see \ref VERSION_BCD() utility macro. + */ + uint8_t Class; /**< USB device class. */ + uint8_t SubClass; /**< USB device subclass. */ + uint8_t Protocol; /**< USB device protocol. */ + + uint8_t Endpoint0Size; /**< Size of the control (address 0) endpoint's bank in bytes. */ + uint8_t NumberOfConfigurations; /**< Total number of configurations supported by + * the device. + */ + uint8_t Reserved; /**< Reserved for future use, must be 0. */ + } ATTR_PACKED USB_Descriptor_DeviceQualifier_t; + + /** \brief Standard USB Device Qualifier Descriptor (USB-IF naming conventions). + * + * Type define for a standard Device Qualifier Descriptor. This structure uses the relevant standard's given element names + * to ensure compatibility with the standard. + * + * \see \ref USB_Descriptor_DeviceQualifier_t for the version of this type with non-standard LUFA specific element names. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value + * given by the specific class. + */ + uint16_t bcdUSB; /**< BCD of the supported USB specification. + * + * \see \ref VERSION_BCD() utility macro. + */ + uint8_t bDeviceClass; /**< USB device class. */ + uint8_t bDeviceSubClass; /**< USB device subclass. */ + uint8_t bDeviceProtocol; /**< USB device protocol. */ + uint8_t bMaxPacketSize0; /**< Size of the control (address 0) endpoint's bank in bytes. */ + uint8_t bNumConfigurations; /**< Total number of configurations supported by + * the device. + */ + uint8_t bReserved; /**< Reserved for future use, must be 0. */ + } ATTR_PACKED USB_StdDescriptor_DeviceQualifier_t; + + /** \brief Standard USB Configuration Descriptor (LUFA naming conventions). + * + * Type define for a standard Configuration Descriptor header. This structure uses LUFA-specific element names + * to make each element's purpose clearer. + * + * \see \ref USB_StdDescriptor_Configuration_Header_t for the version of this type with standard element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ + + uint16_t TotalConfigurationSize; /**< Size of the configuration descriptor header, + * and all sub descriptors inside the configuration. + */ + uint8_t TotalInterfaces; /**< Total number of interfaces in the configuration. */ + + uint8_t ConfigurationNumber; /**< Configuration index of the current configuration. */ + uint8_t ConfigurationStrIndex; /**< Index of a string descriptor describing the configuration. */ + + uint8_t ConfigAttributes; /**< Configuration attributes, comprised of a mask of \c USB_CONFIG_ATTR_* masks. + * On all devices, this should include USB_CONFIG_ATTR_RESERVED at a minimum. + */ + + uint8_t MaxPowerConsumption; /**< Maximum power consumption of the device while in the + * current configuration, calculated by the \ref USB_CONFIG_POWER_MA() + * macro. + */ + } ATTR_PACKED USB_Descriptor_Configuration_Header_t; + + /** \brief Standard USB Configuration Descriptor (USB-IF naming conventions). + * + * Type define for a standard Configuration Descriptor header. This structure uses the relevant standard's given element names + * to ensure compatibility with the standard. + * + * \see \ref USB_Descriptor_Device_t for the version of this type with non-standard LUFA specific element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value + * given by the specific class. + */ + uint16_t wTotalLength; /**< Size of the configuration descriptor header, + * and all sub descriptors inside the configuration. + */ + uint8_t bNumInterfaces; /**< Total number of interfaces in the configuration. */ + uint8_t bConfigurationValue; /**< Configuration index of the current configuration. */ + uint8_t iConfiguration; /**< Index of a string descriptor describing the configuration. */ + uint8_t bmAttributes; /**< Configuration attributes, comprised of a mask of \c USB_CONFIG_ATTR_* masks. + * On all devices, this should include USB_CONFIG_ATTR_RESERVED at a minimum. + */ + uint8_t bMaxPower; /**< Maximum power consumption of the device while in the + * current configuration, calculated by the \ref USB_CONFIG_POWER_MA() + * macro. + */ + } ATTR_PACKED USB_StdDescriptor_Configuration_Header_t; + + /** \brief Standard USB Interface Descriptor (LUFA naming conventions). + * + * Type define for a standard Interface Descriptor. This structure uses LUFA-specific element names + * to make each element's purpose clearer. + * + * \see \ref USB_StdDescriptor_Interface_t for the version of this type with standard element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ + + uint8_t InterfaceNumber; /**< Index of the interface in the current configuration. */ + uint8_t AlternateSetting; /**< Alternate setting for the interface number. The same + * interface number can have multiple alternate settings + * with different endpoint configurations, which can be + * selected by the host. + */ + uint8_t TotalEndpoints; /**< Total number of endpoints in the interface. */ + + uint8_t Class; /**< Interface class ID. */ + uint8_t SubClass; /**< Interface subclass ID. */ + uint8_t Protocol; /**< Interface protocol ID. */ + + uint8_t InterfaceStrIndex; /**< Index of the string descriptor describing the interface. */ + } ATTR_PACKED USB_Descriptor_Interface_t; + + /** \brief Standard USB Interface Descriptor (USB-IF naming conventions). + * + * Type define for a standard Interface Descriptor. This structure uses the relevant standard's given element names + * to ensure compatibility with the standard. + * + * \see \ref USB_Descriptor_Interface_t for the version of this type with non-standard LUFA specific element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value + * given by the specific class. + */ + uint8_t bInterfaceNumber; /**< Index of the interface in the current configuration. */ + uint8_t bAlternateSetting; /**< Alternate setting for the interface number. The same + * interface number can have multiple alternate settings + * with different endpoint configurations, which can be + * selected by the host. + */ + uint8_t bNumEndpoints; /**< Total number of endpoints in the interface. */ + uint8_t bInterfaceClass; /**< Interface class ID. */ + uint8_t bInterfaceSubClass; /**< Interface subclass ID. */ + uint8_t bInterfaceProtocol; /**< Interface protocol ID. */ + uint8_t iInterface; /**< Index of the string descriptor describing the + * interface. + */ + } ATTR_PACKED USB_StdDescriptor_Interface_t; + + /** \brief Standard USB Interface Association Descriptor (LUFA naming conventions). + * + * Type define for a standard Interface Association Descriptor. This structure uses LUFA-specific element names + * to make each element's purpose clearer. + * + * This descriptor has been added as a supplement to the USB2.0 standard, in the ECN located at + * <a>http://www.usb.org/developers/docs/InterfaceAssociationDescriptor_ecn.pdf</a>. It allows composite + * devices with multiple interfaces related to the same function to have the multiple interfaces bound + * together at the point of enumeration, loading one generic driver for all the interfaces in the single + * function. Read the ECN for more information. + * + * \see \ref USB_StdDescriptor_Interface_Association_t for the version of this type with standard element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ + + uint8_t FirstInterfaceIndex; /**< Index of the first associated interface. */ + uint8_t TotalInterfaces; /**< Total number of associated interfaces. */ + + uint8_t Class; /**< Interface class ID. */ + uint8_t SubClass; /**< Interface subclass ID. */ + uint8_t Protocol; /**< Interface protocol ID. */ + + uint8_t IADStrIndex; /**< Index of the string descriptor describing the + * interface association. + */ + } ATTR_PACKED USB_Descriptor_Interface_Association_t; + + /** \brief Standard USB Interface Association Descriptor (USB-IF naming conventions). + * + * Type define for a standard Interface Association Descriptor. This structure uses the relevant standard's given + * element names to ensure compatibility with the standard. + * + * This descriptor has been added as a supplement to the USB2.0 standard, in the ECN located at + * <a>http://www.usb.org/developers/docs/InterfaceAssociationDescriptor_ecn.pdf</a>. It allows composite + * devices with multiple interfaces related to the same function to have the multiple interfaces bound + * together at the point of enumeration, loading one generic driver for all the interfaces in the single + * function. Read the ECN for more information. + * + * \see \ref USB_Descriptor_Interface_Association_t for the version of this type with non-standard LUFA specific + * element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value + * given by the specific class. + */ + uint8_t bFirstInterface; /**< Index of the first associated interface. */ + uint8_t bInterfaceCount; /**< Total number of associated interfaces. */ + uint8_t bFunctionClass; /**< Interface class ID. */ + uint8_t bFunctionSubClass; /**< Interface subclass ID. */ + uint8_t bFunctionProtocol; /**< Interface protocol ID. */ + uint8_t iFunction; /**< Index of the string descriptor describing the + * interface association. + */ + } ATTR_PACKED USB_StdDescriptor_Interface_Association_t; + + /** \brief Standard USB Endpoint Descriptor (LUFA naming conventions). + * + * Type define for a standard Endpoint Descriptor. This structure uses LUFA-specific element names + * to make each element's purpose clearer. + * + * \see \ref USB_StdDescriptor_Endpoint_t for the version of this type with standard element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ + + uint8_t EndpointAddress; /**< Logical address of the endpoint within the device for the current + * configuration, including direction mask. + */ + uint8_t Attributes; /**< Endpoint attributes, comprised of a mask of the endpoint type (EP_TYPE_*) + * and attributes (ENDPOINT_ATTR_*) masks. + */ + uint16_t EndpointSize; /**< Size of the endpoint bank, in bytes. This indicates the maximum packet + * size that the endpoint can receive at a time. + */ + uint8_t PollingIntervalMS; /**< Polling interval in milliseconds for the endpoint if it is an INTERRUPT + * or ISOCHRONOUS type. + */ + } ATTR_PACKED USB_Descriptor_Endpoint_t; + + /** \brief Standard USB Endpoint Descriptor (USB-IF naming conventions). + * + * Type define for a standard Endpoint Descriptor. This structure uses the relevant standard's given + * element names to ensure compatibility with the standard. + * + * \see \ref USB_Descriptor_Endpoint_t for the version of this type with non-standard LUFA specific + * element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a + * value given by the specific class. + */ + uint8_t bEndpointAddress; /**< Logical address of the endpoint within the device for the current + * configuration, including direction mask. + */ + uint8_t bmAttributes; /**< Endpoint attributes, comprised of a mask of the endpoint type (EP_TYPE_*) + * and attributes (ENDPOINT_ATTR_*) masks. + */ + uint16_t wMaxPacketSize; /**< Size of the endpoint bank, in bytes. This indicates the maximum packet size + * that the endpoint can receive at a time. + */ + uint8_t bInterval; /**< Polling interval in milliseconds for the endpoint if it is an INTERRUPT or + * ISOCHRONOUS type. + */ + } ATTR_PACKED USB_StdDescriptor_Endpoint_t; + + /** \brief Standard USB String Descriptor (LUFA naming conventions). + * + * Type define for a standard string descriptor. Unlike other standard descriptors, the length + * of the descriptor for placement in the descriptor header must be determined by the \ref USB_STRING_LEN() + * macro rather than by the size of the descriptor structure, as the length is not fixed. + * + * This structure should also be used for string index 0, which contains the supported language IDs for + * the device as an array. + * + * This structure uses LUFA-specific element names to make each element's purpose clearer. + * + * \see \ref USB_StdDescriptor_String_t for the version of this type with standard element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ + + #if (((ARCH == ARCH_AVR8) || (ARCH == ARCH_XMEGA)) && !defined(__DOXYGEN__)) + wchar_t UnicodeString[]; + #else + uint16_t UnicodeString[]; /**< String data, as unicode characters (alternatively, + * string language IDs). If normal ASCII characters are + * to be used, they must be added as an array of characters + * rather than a normal C string so that they are widened to + * Unicode size. + * + * Under GCC, strings prefixed with the "L" character (before + * the opening string quotation mark) are considered to be + * Unicode strings, and may be used instead of an explicit + * array of ASCII characters on little endian devices with + * UTF-16-LE \c wchar_t encoding. + */ + #endif + } ATTR_PACKED USB_Descriptor_String_t; + + /** \brief Standard USB String Descriptor (USB-IF naming conventions). + * + * Type define for a standard string descriptor. Unlike other standard descriptors, the length + * of the descriptor for placement in the descriptor header must be determined by the \ref USB_STRING_LEN() + * macro rather than by the size of the descriptor structure, as the length is not fixed. + * + * This structure should also be used for string index 0, which contains the supported language IDs for + * the device as an array. + * + * This structure uses the relevant standard's given element names to ensure compatibility with the standard. + * + * \see \ref USB_Descriptor_String_t for the version of this type with with non-standard LUFA specific + * element names. + * + * \note Regardless of CPU architecture, these values should be stored as little endian. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t + * or a value given by the specific class. + */ + uint16_t bString[]; /**< String data, as unicode characters (alternatively, string language IDs). + * If normal ASCII characters are to be used, they must be added as an array + * of characters rather than a normal C string so that they are widened to + * Unicode size. + * + * Under GCC, strings prefixed with the "L" character (before the opening string + * quotation mark) are considered to be Unicode strings, and may be used instead + * of an explicit array of ASCII characters. + */ + } ATTR_PACKED USB_StdDescriptor_String_t; + + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/StdRequestType.h b/lib/lufa/LUFA/Drivers/USB/Core/StdRequestType.h new file mode 100644 index 0000000000..7297806962 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/StdRequestType.h @@ -0,0 +1,258 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB control endpoint request definitions. + * \copydetails Group_StdRequest + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_StdRequest Standard USB Requests + * \brief USB control endpoint request definitions. + * + * This module contains definitions for the various control request parameters, so that the request + * details (such as data direction, request recipient, etc.) can be extracted via masking. + * + * @{ + */ + +#ifndef __STDREQTYPE_H__ +#define __STDREQTYPE_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Mask for the request type parameter, to indicate the direction of the request data (Host to Device + * or Device to Host). The result of this mask should then be compared to the request direction masks. + * + * \see \c REQDIR_* macros for masks indicating the request data direction. + */ + #define CONTROL_REQTYPE_DIRECTION 0x80 + + /** Mask for the request type parameter, to indicate the type of request (Device, Class or Vendor + * Specific). The result of this mask should then be compared to the request type masks. + * + * \see \c REQTYPE_* macros for masks indicating the request type. + */ + #define CONTROL_REQTYPE_TYPE 0x60 + + /** Mask for the request type parameter, to indicate the recipient of the request (Device, Interface + * Endpoint or Other). The result of this mask should then be compared to the request recipient + * masks. + * + * \see \c REQREC_* macros for masks indicating the request recipient. + */ + #define CONTROL_REQTYPE_RECIPIENT 0x1F + + /** \name Control Request Data Direction Masks */ + //@{ + /** Request data direction mask, indicating that the request data will flow from host to device. + * + * \see \ref CONTROL_REQTYPE_DIRECTION macro. + */ + #define REQDIR_HOSTTODEVICE (0 << 7) + + /** Request data direction mask, indicating that the request data will flow from device to host. + * + * \see \ref CONTROL_REQTYPE_DIRECTION macro. + */ + #define REQDIR_DEVICETOHOST (1 << 7) + //@} + + /** \name Control Request Type Masks */ + //@{ + /** Request type mask, indicating that the request is a standard request. + * + * \see \ref CONTROL_REQTYPE_TYPE macro. + */ + #define REQTYPE_STANDARD (0 << 5) + + /** Request type mask, indicating that the request is a class-specific request. + * + * \see \ref CONTROL_REQTYPE_TYPE macro. + */ + #define REQTYPE_CLASS (1 << 5) + + /** Request type mask, indicating that the request is a vendor specific request. + * + * \see \ref CONTROL_REQTYPE_TYPE macro. + */ + #define REQTYPE_VENDOR (2 << 5) + //@} + + /** \name Control Request Recipient Masks */ + //@{ + /** Request recipient mask, indicating that the request is to be issued to the device as a whole. + * + * \see \ref CONTROL_REQTYPE_RECIPIENT macro. + */ + #define REQREC_DEVICE (0 << 0) + + /** Request recipient mask, indicating that the request is to be issued to an interface in the + * currently selected configuration. + * + * \see \ref CONTROL_REQTYPE_RECIPIENT macro. + */ + #define REQREC_INTERFACE (1 << 0) + + /** Request recipient mask, indicating that the request is to be issued to an endpoint in the + * currently selected configuration. + * + * \see \ref CONTROL_REQTYPE_RECIPIENT macro. + */ + #define REQREC_ENDPOINT (2 << 0) + + /** Request recipient mask, indicating that the request is to be issued to an unspecified element + * in the currently selected configuration. + * + * \see \ref CONTROL_REQTYPE_RECIPIENT macro. + */ + #define REQREC_OTHER (3 << 0) + //@} + + /* Type Defines: */ + /** \brief Standard USB Control Request + * + * Type define for a standard USB control request. + * + * \see The USB 2.0 specification for more information on standard control requests. + */ + typedef struct + { + uint8_t bmRequestType; /**< Type of the request. */ + uint8_t bRequest; /**< Request command code. */ + uint16_t wValue; /**< wValue parameter of the request. */ + uint16_t wIndex; /**< wIndex parameter of the request. */ + uint16_t wLength; /**< Length of the data to transfer in bytes. */ + } ATTR_PACKED USB_Request_Header_t; + + /* Enums: */ + /** Enumeration for the various standard request commands. These commands are applicable when the + * request type is \ref REQTYPE_STANDARD (with the exception of \ref REQ_GetDescriptor, which is always + * handled regardless of the request type value). + * + * \see Chapter 9 of the USB 2.0 Specification. + */ + enum USB_Control_Request_t + { + REQ_GetStatus = 0, /**< Implemented in the library for device and endpoint recipients. Passed + * to the user application for other recipients via the + * \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_ClearFeature = 1, /**< Implemented in the library for device and endpoint recipients. Passed + * to the user application for other recipients via the + * \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_SetFeature = 3, /**< Implemented in the library for device and endpoint recipients. Passed + * to the user application for other recipients via the + * \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_SetAddress = 5, /**< Implemented in the library for the device recipient. Passed + * to the user application for other recipients via the + * \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_GetDescriptor = 6, /**< Implemented in the library for device and interface recipients. Passed to the + * user application for other recipients via the + * \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_SetDescriptor = 7, /**< Not implemented in the library, passed to the user application + * via the \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_GetConfiguration = 8, /**< Implemented in the library for the device recipient. Passed + * to the user application for other recipients via the + * \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_SetConfiguration = 9, /**< Implemented in the library for the device recipient. Passed + * to the user application for other recipients via the + * \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_GetInterface = 10, /**< Not implemented in the library, passed to the user application + * via the \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_SetInterface = 11, /**< Not implemented in the library, passed to the user application + * via the \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_SynchFrame = 12, /**< Not implemented in the library, passed to the user application + * via the \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + }; + + /** Feature Selector values for Set Feature and Clear Feature standard control requests directed to the device, interface + * and endpoint recipients. + */ + enum USB_Feature_Selectors_t + { + FEATURE_SEL_EndpointHalt = 0x00, /**< Feature selector for Clear Feature or Set Feature commands. When + * used in a Set Feature or Clear Feature request this indicates that an + * endpoint (whose address is given elsewhere in the request) should have + * its stall condition changed. + */ + FEATURE_SEL_DeviceRemoteWakeup = 0x01, /**< Feature selector for Device level Remote Wakeup enable set or clear. + * This feature can be controlled by the host on devices which indicate + * remote wakeup support in their descriptors to selectively disable or + * enable remote wakeup. + */ + FEATURE_SEL_TestMode = 0x02, /**< Feature selector for Test Mode features, used to test the USB controller + * to check for incorrect operation. + */ + }; + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define FEATURE_SELFPOWERED_ENABLED (1 << 0) + #define FEATURE_REMOTE_WAKEUP_ENABLED (1 << 1) + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/Device_UC3.c b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Device_UC3.c new file mode 100644 index 0000000000..3aa1433f53 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Device_UC3.c @@ -0,0 +1,51 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_UC3) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "../Device.h" + +void USB_Device_SendRemoteWakeup(void) +{ + USB_CLK_Unfreeze(); + + AVR32_USBB.UDCON.rmwkup = true; + while (AVR32_USBB.UDCON.rmwkup); +} + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/Device_UC3.h b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Device_UC3.h new file mode 100644 index 0000000000..fd6dbde887 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Device_UC3.h @@ -0,0 +1,267 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Device definitions for the AVR32 UC3 microcontrollers. + * \copydetails Group_Device_UC3 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_Device + * \defgroup Group_Device_UC3 Device Management (UC3) + * \brief USB Device definitions for the AVR32 UC3 microcontrollers. + * + * Architecture specific USB Device definitions for the Atmel 32-bit UC3 AVR microcontrollers. + * + * @{ + */ + +#ifndef __USBDEVICE_UC3_H__ +#define __USBDEVICE_UC3_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBController.h" + #include "../StdDescriptors.h" + #include "../USBInterrupt.h" + #include "../Endpoint.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name USB Device Mode Option Masks */ + //@{ + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in low speed (1.5Mb/s) mode. + * + * \note Restrictions apply on the number, size and type of endpoints which can be used + * when running in low speed mode - please refer to the USB 2.0 specification. + */ + #define USB_DEVICE_OPT_LOWSPEED (1 << 0) + + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in full speed (12Mb/s) mode. + */ + #define USB_DEVICE_OPT_FULLSPEED (0 << 0) + + #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) || defined(__DOXYGEN__) + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in high speed (480Mb/s) mode. + */ + #define USB_DEVICE_OPT_HIGHSPEED (1 << 1) + #endif + //@} + + #if (!defined(NO_INTERNAL_SERIAL) && \ + (defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) || \ + defined(__DOXYGEN__))) + /** String descriptor index for the device's unique serial number string descriptor within the device. + * This unique serial number is used by the host to associate resources to the device (such as drivers or COM port + * number allocations) to a device regardless of the port it is plugged in to on the host. Some microcontrollers contain + * a unique serial number internally, and setting the device descriptors serial number string index to this value + * will cause it to use the internal serial number. + * + * On unsupported devices, this will evaluate to \ref NO_DESCRIPTOR and so will force the host to create a pseudo-serial + * number for the device. + */ + #define USE_INTERNAL_SERIAL 0xDC + + /** Length of the device's unique internal serial number, in bits, if present on the selected microcontroller + * model. + */ + #define INTERNAL_SERIAL_LENGTH_BITS 120 + + /** Start address of the internal serial number, in the appropriate address space, if present on the selected microcontroller + * model. + */ + #define INTERNAL_SERIAL_START_ADDRESS 0x80800204 + #else + #define USE_INTERNAL_SERIAL NO_DESCRIPTOR + + #define INTERNAL_SERIAL_LENGTH_BITS 0 + #define INTERNAL_SERIAL_START_ADDRESS 0 + #endif + + /* Function Prototypes: */ + /** Sends a Remote Wakeup request to the host. This signals to the host that the device should + * be taken out of suspended mode, and communications should resume. + * + * Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the + * host computer when the host has suspended all USB devices to enter a low power state. + * + * \note This function should only be used if the device has indicated to the host that it + * supports the Remote Wakeup feature in the device descriptors, and should only be + * issued if the host is currently allowing remote wakeup events from the device (i.e., + * the \ref USB_Device_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP + * compile time option is used, this function is unavailable. + * + * \note The USB clock must be running for this function to operate. If the stack is initialized with + * the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running + * before attempting to call this function. + * + * \see \ref Group_StdDescriptors for more information on the RMWAKEUP feature and device descriptors. + */ + void USB_Device_SendRemoteWakeup(void); + + /* Inline Functions: */ + /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host) + * the frame number is incremented by one. + * + * \return Current USB frame number from the USB controller. + */ + static inline uint16_t USB_Device_GetFrameNumber(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline uint16_t USB_Device_GetFrameNumber(void) + { + return AVR32_USBB.UDFNUM.fnum; + } + + #if !defined(NO_SOF_EVENTS) + /** Enables the device mode Start Of Frame events. When enabled, this causes the + * \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, + * at the start of each USB frame when enumerated in device mode. + * + * \note Not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_EnableSOFEvents(void) + { + USB_INT_Enable(USB_INT_SOFI); + } + + /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the + * \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode. + * + * \note Not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_DisableSOFEvents(void) + { + USB_INT_Disable(USB_INT_SOFI); + } + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Inline Functions: */ + static inline void USB_Device_SetLowSpeed(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetLowSpeed(void) + { + AVR32_USBB.UDCON.ls = true; + } + + static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetFullSpeed(void) + { + AVR32_USBB.UDCON.ls = false; + #if defined(USB_DEVICE_OPT_HIGHSPEED) + AVR32_USBB.UDCON.spdconf = 3; + #endif + } + + #if defined(USB_DEVICE_OPT_HIGHSPEED) + static inline void USB_Device_SetHighSpeed(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetHighSpeed(void) + { + AVR32_USBB.UDCON.ls = false; + AVR32_USBB.UDCON.spdconf = 0; + } + #endif + + static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetDeviceAddress(const uint8_t Address) + { + AVR32_USBB.UDCON.uadd = Address; + } + + static inline void USB_Device_EnableDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void USB_Device_EnableDeviceAddress(const uint8_t Address) + { + (void)Address; + + AVR32_USBB.UDCON.adden = true; + } + + static inline bool USB_Device_IsAddressSet(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline bool USB_Device_IsAddressSet(void) + { + return AVR32_USBB.UDCON.adden; + } + + #if (USE_INTERNAL_SERIAL != NO_DESCRIPTOR) + static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString) ATTR_NON_NULL_PTR_ARG(1); + static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString) + { + uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask(); + GlobalInterruptDisable(); + + uint8_t* SigReadAddress = (uint8_t*)INTERNAL_SERIAL_START_ADDRESS; + + for (uint8_t SerialCharNum = 0; SerialCharNum < (INTERNAL_SERIAL_LENGTH_BITS / 4); SerialCharNum++) + { + uint8_t SerialByte = *SigReadAddress; + + if (SerialCharNum & 0x01) + { + SerialByte >>= 4; + SigReadAddress++; + } + + SerialByte &= 0x0F; + + UnicodeString[SerialCharNum] = cpu_to_le16((SerialByte >= 10) ? + (('A' - 10) + SerialByte) : ('0' + SerialByte)); + } + + SetGlobalInterruptMask(CurrentGlobalInt); + } + #endif + + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.c b/lib/lufa/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.c new file mode 100644 index 0000000000..04f6e97d65 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.c @@ -0,0 +1,235 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_UC3) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "EndpointStream_UC3.h" + +#if !defined(CONTROL_ONLY_DEVICE) +uint8_t Endpoint_Discard_Stream(uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t ErrorCode; + uint16_t BytesInTransfer = 0; + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + Length -= *BytesProcessed; + + while (Length) + { + if (!(Endpoint_IsReadWriteAllowed())) + { + Endpoint_ClearOUT(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return ENDPOINT_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + } + else + { + Endpoint_Discard_8(); + + Length--; + BytesInTransfer++; + } + } + + return ENDPOINT_RWSTREAM_NoError; +} + +uint8_t Endpoint_Null_Stream(uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t ErrorCode; + uint16_t BytesInTransfer = 0; + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + Length -= *BytesProcessed; + + while (Length) + { + if (!(Endpoint_IsReadWriteAllowed())) + { + Endpoint_ClearIN(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return ENDPOINT_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + } + else + { + Endpoint_Write_8(0); + + Length--; + BytesInTransfer++; + } + } + + return ENDPOINT_RWSTREAM_NoError; +} + +/* The following abuses the C preprocessor in order to copy-paste common code with slight alterations, + * so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */ + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_LE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_RW.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_BE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_RW.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_LE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_RW.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_BE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_RW.c" + +#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_LE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_BE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" +#endif + +#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_LE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_BE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_LE + #define TEMPLATE_BUFFER_TYPE void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_BE + #define TEMPLATE_BUFFER_TYPE void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_RW.c" +#endif + +#endif + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_LE +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_Control_W.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_BE +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_Control_W.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_LE +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_Control_R.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_BE +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_Control_R.c" + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h b/lib/lufa/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h new file mode 100644 index 0000000000..8b1c10eb09 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h @@ -0,0 +1,438 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Endpoint data stream transmission and reception management for the AVR32 UC3 microcontrollers. + * \copydetails Group_EndpointStreamRW_UC3 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_EndpointStreamRW + * \defgroup Group_EndpointStreamRW_UC3 Read/Write of Multi-Byte Streams (UC3) + * \brief Endpoint data stream transmission and reception management for the Atmel AVR32 UC3 architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing of data streams from + * and to endpoints. + * + * @{ + */ + +#ifndef __ENDPOINT_STREAM_UC3_H__ +#define __ENDPOINT_STREAM_UC3_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBMode.h" + #include "../USBTask.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Function Prototypes: */ + /** \name Stream functions for null data */ + //@{ + + /** Reads and discards the given number of bytes from the currently selected endpoint's bank, + * discarding fully read packets from the host as needed. The last packet is not automatically + * discarded once the remaining bytes has been read; the user is responsible for manually + * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes empty while there is still data to process (and after the current + * packet has been acknowledged) the BytesProcessed location will be updated with the total number + * of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Discard_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Discard_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Length Number of bytes to discard via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Discard_Stream(uint16_t Length, + uint16_t* const BytesProcessed); + + /** Writes a given number of zeroed bytes to the currently selected endpoint's bank, sending + * full packets to the host as needed. The last packet is not automatically sent once the + * remaining bytes have been written; the user is responsible for manually sending the last + * packet to the host via the \ref Endpoint_ClearIN() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes full while there is still data to process (and after the current + * packet transmission has been initiated) the BytesProcessed location will be updated with the + * total number of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Null_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Null_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Length Number of zero bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Null_Stream(uint16_t Length, + uint16_t* const BytesProcessed); + + //@} + + /** \name Stream functions for RAM source/destination data */ + //@{ + + /** Writes the given number of bytes to the endpoint from the given buffer in little endian, + * sending full packets to the host as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Endpoint_ClearIN() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes full while there is still data to process (and after the current + * packet transmission has been initiated) the BytesProcessed location will be updated with the + * total number of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream), + * NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream), + * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Stream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the endpoint from the given buffer in big endian, + * sending full packets to the host as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Endpoint_ClearIN() macro. + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Stream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the endpoint from the given buffer in little endian, + * discarding fully read packets from the host as needed. The last packet is not automatically + * discarded once the remaining bytes has been read; the user is responsible for manually + * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes empty while there is still data to process (and after the current + * packet has been acknowledged) the BytesProcessed location will be updated with the total number + * of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream), + * NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream), + * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Stream_LE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the endpoint from the given buffer in big endian, + * discarding fully read packets from the host as needed. The last packet is not automatically + * discarded once the remaining bytes has been read; the user is responsible for manually + * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Stream_BE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian, + * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared + * in both failure and success states; the user is responsible for manually clearing the status OUT packet + * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_Stream_LE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian, + * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared + * in both failure and success states; the user is responsible for manually clearing the status OUT packet + * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_Stream_BE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian, + * discarding fully read packets from the host as needed. The device IN acknowledgement is not + * automatically sent after success or failure states; the user is responsible for manually sending the + * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_Stream_LE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian, + * discarding fully read packets from the host as needed. The device IN acknowledgement is not + * automatically sent after success or failure states; the user is responsible for manually sending the + * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c new file mode 100644 index 0000000000..7e24672c50 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c @@ -0,0 +1,196 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_UC3) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "../Endpoint.h" + +#if !defined(FIXED_CONTROL_ENDPOINT_SIZE) +uint8_t USB_Device_ControlEndpointSize = ENDPOINT_CONTROLEP_DEFAULT_SIZE; +#endif + +volatile uint32_t USB_Endpoint_SelectedEndpoint = ENDPOINT_CONTROLEP; +volatile uint8_t* USB_Endpoint_FIFOPos[ENDPOINT_TOTAL_ENDPOINTS]; + +bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Endpoint_ConfigureEndpoint(Table[i].Address, Table[i].Type, Table[i].Size, Table[i].Banks))) + { + return false; + } + } + + return true; +} + +bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number, + const uint32_t UECFG0Data) +{ + USB_Endpoint_FIFOPos[Number] = &AVR32_USBB_SLAVE[Number * ENDPOINT_HSB_ADDRESS_SPACE_SIZE]; + +#if defined(CONTROL_ONLY_DEVICE) || defined(ORDERED_EP_CONFIG) + Endpoint_SelectEndpoint(Number); + Endpoint_EnableEndpoint(); + + (&AVR32_USBB.uecfg0)[Number] = 0; + (&AVR32_USBB.uecfg0)[Number] = UECFG0Data; + + return Endpoint_IsConfigured(); +#else + for (uint8_t EPNum = Number; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++) + { + uint32_t UECFG0Temp; + + Endpoint_SelectEndpoint(EPNum); + + if (EPNum == Number) + { + UECFG0Temp = UECFG0Data; + } + else + { + UECFG0Temp = (&AVR32_USBB.uecfg0)[EPNum]; + } + + if (!(UECFG0Temp & AVR32_USBB_ALLOC_MASK)) + continue; + + Endpoint_DisableEndpoint(); + (&AVR32_USBB.uecfg0)[EPNum] &= ~AVR32_USBB_ALLOC_MASK; + + Endpoint_EnableEndpoint(); + (&AVR32_USBB.uecfg0)[EPNum] = UECFG0Temp; + + if (!(Endpoint_IsConfigured())) + return false; + } + + Endpoint_SelectEndpoint(Number); + return true; +#endif +} + +void Endpoint_ClearEndpoints(void) +{ + for (uint8_t EPNum = 0; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++) + { + Endpoint_SelectEndpoint(EPNum); + (&AVR32_USBB.uecfg0)[EPNum] = 0; + (&AVR32_USBB.uecon0clr)[EPNum] = -1; + USB_Endpoint_FIFOPos[EPNum] = &AVR32_USBB_SLAVE[EPNum * 0x10000]; + Endpoint_DisableEndpoint(); + } +} + +void Endpoint_ClearStatusStage(void) +{ + if (USB_ControlRequest.bmRequestType & REQDIR_DEVICETOHOST) + { + while (!(Endpoint_IsOUTReceived())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + + Endpoint_ClearOUT(); + } + else + { + while (!(Endpoint_IsINReady())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + + Endpoint_ClearIN(); + } +} + +#if !defined(CONTROL_ONLY_DEVICE) +uint8_t Endpoint_WaitUntilReady(void) +{ + #if (USB_STREAM_TIMEOUT_MS < 0xFF) + uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #else + uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #endif + + uint16_t PreviousFrameNumber = USB_Device_GetFrameNumber(); + + for (;;) + { + if (Endpoint_GetEndpointDirection() == ENDPOINT_DIR_IN) + { + if (Endpoint_IsINReady()) + return ENDPOINT_READYWAIT_NoError; + } + else + { + if (Endpoint_IsOUTReceived()) + return ENDPOINT_READYWAIT_NoError; + } + + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_READYWAIT_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_READYWAIT_BusSuspended; + else if (Endpoint_IsStalled()) + return ENDPOINT_READYWAIT_EndpointStalled; + + uint16_t CurrentFrameNumber = USB_Device_GetFrameNumber(); + + if (CurrentFrameNumber != PreviousFrameNumber) + { + PreviousFrameNumber = CurrentFrameNumber; + + if (!(TimeoutMSRem--)) + return ENDPOINT_READYWAIT_Timeout; + } + } +} +#endif + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h new file mode 100644 index 0000000000..32d6a9b768 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h @@ -0,0 +1,794 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Endpoint definitions for the AVR32 UC3 microcontrollers. + * \copydetails Group_EndpointManagement_UC3 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_EndpointRW + * \defgroup Group_EndpointRW_UC3 Endpoint Data Reading and Writing (UC3) + * \brief Endpoint data read/write definitions for the Atmel AVR32 UC3 architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing from and to endpoints. + */ + +/** \ingroup Group_EndpointPrimitiveRW + * \defgroup Group_EndpointPrimitiveRW_UC3 Read/Write of Primitive Data Types (UC3) + * \brief Endpoint primitive read/write definitions for the Atmel AVR32 UC3 architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing of primitive data types + * from and to endpoints. + */ + +/** \ingroup Group_EndpointPacketManagement + * \defgroup Group_EndpointPacketManagement_UC3 Endpoint Packet Management (UC3) + * \brief Endpoint packet management definitions for the Atmel AVR32 UC3 architecture. + * + * Functions, macros, variables, enums and types related to packet management of endpoints. + */ + +/** \ingroup Group_EndpointManagement + * \defgroup Group_EndpointManagement_UC3 Endpoint Management (UC3) + * \brief Endpoint management definitions for the Atmel AVR32 UC3 architecture. + * + * Functions, macros and enums related to endpoint management when in USB Device mode. This + * module contains the endpoint management macros, as well as endpoint interrupt and data + * send/receive functions for various data types. + * + * @{ + */ + +#ifndef __ENDPOINT_UC3_H__ +#define __ENDPOINT_UC3_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBTask.h" + #include "../USBInterrupt.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define ENDPOINT_HSB_ADDRESS_SPACE_SIZE (64 * 1024UL) + + /* Inline Functions: */ + static inline uint32_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST + ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) + { + uint8_t MaskVal = 0; + uint16_t CheckBytes = 8; + + while (CheckBytes < Bytes) + { + MaskVal++; + CheckBytes <<= 1; + } + + return (MaskVal << AVR32_USBB_EPSIZE_OFFSET); + } + + /* Function Prototypes: */ + void Endpoint_ClearEndpoints(void); + bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number, + const uint32_t UECFGXData); + + /* External Variables: */ + extern volatile uint32_t USB_Endpoint_SelectedEndpoint; + extern volatile uint8_t* USB_Endpoint_FIFOPos[]; + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) + /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size + * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined. + */ + #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8 + #endif + + #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__) + #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) + #define ENDPOINT_TOTAL_ENDPOINTS 8 + #else + /** Total number of endpoints (including the default control endpoint at address 0) which may + * be used in the device. Different AVR models support different amounts of endpoints, + * this value reflects the maximum number of endpoints for the currently selected AVR model. + */ + #define ENDPOINT_TOTAL_ENDPOINTS 7 + #endif + #else + #define ENDPOINT_TOTAL_ENDPOINTS 1 + #endif + + /* Enums: */ + /** Enum for the possible error return codes of the \ref Endpoint_WaitUntilReady() function. + * + * \ingroup Group_EndpointRW_UC3 + */ + enum Endpoint_WaitUntilReady_ErrorCodes_t + { + ENDPOINT_READYWAIT_NoError = 0, /**< Endpoint is ready for next packet, no error. */ + ENDPOINT_READYWAIT_EndpointStalled = 1, /**< The endpoint was stalled during the stream + * transfer by the host or device. + */ + ENDPOINT_READYWAIT_DeviceDisconnected = 2, /**< Device was disconnected from the host while + * waiting for the endpoint to become ready. + */ + ENDPOINT_READYWAIT_BusSuspended = 3, /**< The USB bus has been suspended by the host and + * no USB endpoint traffic can occur until the bus + * has resumed. + */ + ENDPOINT_READYWAIT_Timeout = 4, /**< The host failed to accept or send the next packet + * within the software timeout period set by the + * \ref USB_STREAM_TIMEOUT_MS macro. + */ + }; + + /* Inline Functions: */ + /** Configures the specified endpoint address with the given endpoint type, bank size and number of hardware + * banks. Once configured, the endpoint may be read from or written to, depending on its direction. + * + * \param[in] Address Endpoint address to configure. + * + * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types + * are available on Low Speed USB devices - refer to the USB 2.0 specification. + * + * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted + * to the USB host, or after they have been received from the USB host (depending on + * the endpoint's data direction). The bank size must indicate the maximum packet size + * that the endpoint can handle. + * + * \param[in] Banks Number of hardware banks to use for the endpoint being configured. + * + * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints <b>must</b> be configured in + * ascending order, or bank corruption will occur. + * + * \note Different endpoints may have different maximum packet sizes based on the endpoint's index - refer to + * the chosen microcontroller model's datasheet to determine the maximum bank size for each endpoint. + * \n\n + * + * \note The default control endpoint should not be manually configured by the user application, as + * it is automatically configured by the library internally. + * \n\n + * + * \note This routine will automatically select the specified endpoint upon success. Upon failure, the endpoint + * which failed to reconfigure correctly will be selected. + * + * \return Boolean \c true if the configuration succeeded, \c false otherwise. + */ + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, + const uint8_t Type, + const uint16_t Size, + const uint8_t Banks) ATTR_ALWAYS_INLINE; + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, + const uint8_t Type, + const uint16_t Size, + const uint8_t Banks) + { + uint8_t Number = (Address & ENDPOINT_EPNUM_MASK); + + if (Number >= ENDPOINT_TOTAL_ENDPOINTS) + return false; + + return Endpoint_ConfigureEndpoint_Prv(Number, + (AVR32_USBB_ALLOC_MASK | + ((uint32_t)Type << AVR32_USBB_EPTYPE_OFFSET) | + ((Address & ENDPOINT_DIR_IN) ? AVR32_USBB_UECFG0_EPDIR_MASK : 0) | + ((Banks > 1) ? AVR32_USBB_UECFG0_EPBK_SINGLE : AVR32_USBB_UECFG0_EPBK_DOUBLE) | + Endpoint_BytesToEPSizeMask(Size))); + } + + /** Indicates the number of bytes currently stored in the current endpoint's selected bank. + * + * \ingroup Group_EndpointRW_UC3 + * + * \return Total number of bytes in the currently selected Endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_BytesInEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_BytesInEndpoint(void) + { + return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].byct; + } + + /** Determines the currently selected endpoint's direction. + * + * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask. + */ + static inline uint32_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_GetEndpointDirection(void) + { + return ((&AVR32_USBB.UECFG0)[USB_Endpoint_SelectedEndpoint].epdir ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT); + } + + /** Get the endpoint address of the currently selected endpoint. This is typically used to save + * the currently selected endpoint so that it can be restored after another endpoint has been + * manipulated. + * + * \return Index of the currently selected endpoint. + */ + static inline uint8_t Endpoint_GetCurrentEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetCurrentEndpoint(void) + { + return (USB_Endpoint_SelectedEndpoint | Endpoint_GetEndpointDirection()); + } + + /** Selects the given endpoint address. + * + * Any endpoint operations which do not require the endpoint address to be indicated will operate on + * the currently selected endpoint. + * + * \param[in] Address Endpoint address to select. + */ + static inline void Endpoint_SelectEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_SelectEndpoint(const uint8_t Address) + { + USB_Endpoint_SelectedEndpoint = (Address & ENDPOINT_EPNUM_MASK); + } + + /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's + * data In and Out pointers to the bank's contents. + * + * \param[in] Address Endpoint number whose FIFO buffers are to be reset. + */ + static inline void Endpoint_ResetEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetEndpoint(const uint8_t Address) + { + uint32_t EndpointNumber = (Address & ENDPOINT_EPNUM_MASK); + + AVR32_USBB.uerst |= (AVR32_USBB_EPRST0_MASK << EndpointNumber); + AVR32_USBB.uerst &= ~(AVR32_USBB_EPRST0_MASK << EndpointNumber); + USB_Endpoint_FIFOPos[EndpointNumber] = &AVR32_USBB_SLAVE[EndpointNumber * ENDPOINT_HSB_ADDRESS_SPACE_SIZE]; + } + + /** Enables the currently selected endpoint so that data can be sent and received through it to + * and from a host. + * + * \note Endpoints must first be configured properly via \ref Endpoint_ConfigureEndpoint(). + */ + static inline void Endpoint_EnableEndpoint(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_EnableEndpoint(void) + { + AVR32_USBB.uerst |= (AVR32_USBB_EPEN0_MASK << USB_Endpoint_SelectedEndpoint); + } + + /** Disables the currently selected endpoint so that data cannot be sent and received through it + * to and from a host. + */ + static inline void Endpoint_DisableEndpoint(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_DisableEndpoint(void) + { + AVR32_USBB.uerst &= ~(AVR32_USBB_EPEN0_MASK << USB_Endpoint_SelectedEndpoint); + } + + /** Determines if the currently selected endpoint is enabled, but not necessarily configured. + * + * \return Boolean \c true if the currently selected endpoint is enabled, \c false otherwise. + */ + static inline bool Endpoint_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsEnabled(void) + { + return ((AVR32_USBB.uerst & (AVR32_USBB_EPEN0_MASK << USB_Endpoint_SelectedEndpoint)) ? true : false); + } + + /** Retrieves the number of busy banks in the currently selected endpoint, which have been queued for + * transmission via the \ref Endpoint_ClearIN() command, or are awaiting acknowledgement via the + * \ref Endpoint_ClearOUT() command. + * + * \ingroup Group_EndpointPacketManagement_UC3 + * + * \return Total number of busy banks in the selected endpoint. + */ + static inline uint8_t Endpoint_GetBusyBanks(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline uint8_t Endpoint_GetBusyBanks(void) + { + return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].nbusybk; + } + + /** Aborts all pending IN transactions on the currently selected endpoint, once the bank + * has been queued for transmission to the host via \ref Endpoint_ClearIN(). This function + * will terminate all queued transactions, resetting the endpoint banks ready for a new + * packet. + * + * \ingroup Group_EndpointPacketManagement_UC3 + */ + static inline void Endpoint_AbortPendingIN(void) + { + while (Endpoint_GetBusyBanks() != 0) + { + (&AVR32_USBB.UECON0SET)[USB_Endpoint_SelectedEndpoint].killbks = true; + while ((&AVR32_USBB.UECON0)[USB_Endpoint_SelectedEndpoint].killbk); + } + } + + /** Determines if the currently selected endpoint may be read from (if data is waiting in the endpoint + * bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an IN + * direction). This function will return false if an error has occurred in the endpoint, if the endpoint + * is an OUT direction and no packet (or an empty packet) has been received, or if the endpoint is an IN + * direction and the endpoint bank is full. + * + * \ingroup Group_EndpointPacketManagement_UC3 + * + * \return Boolean \c true if the currently selected endpoint may be read from or written to, depending + * on its direction. + */ + static inline bool Endpoint_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsReadWriteAllowed(void) + { + return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].rwall; + } + + /** Determines if the currently selected endpoint is configured. + * + * \return Boolean \c true if the currently selected endpoint has been configured, \c false otherwise. + */ + static inline bool Endpoint_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsConfigured(void) + { + return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].cfgok; + } + + /** Returns a mask indicating which INTERRUPT type endpoints have interrupted - i.e. their + * interrupt duration has elapsed. Which endpoints have interrupted can be determined by + * masking the return value against <tt>(1 << <i>{Endpoint Number}</i>)</tt>. + * + * \return Mask whose bits indicate which endpoints have interrupted. + */ + static inline uint32_t Endpoint_GetEndpointInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_GetEndpointInterrupts(void) + { + return ((AVR32_USBB.udint & (AVR32_USBB_EP6INT_MASK | AVR32_USBB_EP5INT_MASK | + AVR32_USBB_EP4INT_MASK | AVR32_USBB_EP3INT_MASK | + AVR32_USBB_EP2INT_MASK | AVR32_USBB_EP1INT_MASK | + AVR32_USBB_EP0INT_MASK)) >> AVR32_USBB_EP0INT_OFFSET); + } + + /** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type + * endpoints). + * + * \param[in] Address Address of the endpoint whose interrupt flag should be tested. + * + * \return Boolean \c true if the specified endpoint has interrupted, \c false otherwise. + */ + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) + { + return ((Endpoint_GetEndpointInterrupts() & (AVR32_USBB_EP0INT_MASK << (Address & ENDPOINT_EPNUM_MASK))) ? true : false); + } + + /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host. + * + * \ingroup Group_EndpointPacketManagement_UC3 + * + * \return Boolean \c true if the current endpoint is ready for an IN packet, \c false otherwise. + */ + static inline bool Endpoint_IsINReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsINReady(void) + { + return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].txini; + } + + /** Determines if the selected OUT endpoint has received new packet from the host. + * + * \ingroup Group_EndpointPacketManagement_UC3 + * + * \return Boolean \c true if current endpoint is has received an OUT packet, \c false otherwise. + */ + static inline bool Endpoint_IsOUTReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsOUTReceived(void) + { + return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].rxouti; + } + + /** Determines if the current CONTROL type endpoint has received a SETUP packet. + * + * \ingroup Group_EndpointPacketManagement_UC3 + * + * \return Boolean \c true if the selected endpoint has received a SETUP packet, \c false otherwise. + */ + static inline bool Endpoint_IsSETUPReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsSETUPReceived(void) + { + return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].rxstpi; + } + + /** Clears a received SETUP packet on the currently selected CONTROL type endpoint, freeing up the + * endpoint for the next packet. + * + * \ingroup Group_EndpointPacketManagement_UC3 + * + * \note This is not applicable for non CONTROL type endpoints. + */ + static inline void Endpoint_ClearSETUP(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearSETUP(void) + { + (&AVR32_USBB.UESTA0CLR)[USB_Endpoint_SelectedEndpoint].rxstpic = true; + USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint] = &AVR32_USBB_SLAVE[USB_Endpoint_SelectedEndpoint * ENDPOINT_HSB_ADDRESS_SPACE_SIZE]; + } + + /** Sends an IN packet to the host on the currently selected endpoint, freeing up the endpoint for the + * next packet and switching to the alternative endpoint bank if double banked. + * + * \ingroup Group_EndpointPacketManagement_UC3 + */ + static inline void Endpoint_ClearIN(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearIN(void) + { + (&AVR32_USBB.UESTA0CLR)[USB_Endpoint_SelectedEndpoint].txinic = true; + (&AVR32_USBB.UECON0CLR)[USB_Endpoint_SelectedEndpoint].fifoconc = true; + USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint] = &AVR32_USBB_SLAVE[USB_Endpoint_SelectedEndpoint * ENDPOINT_HSB_ADDRESS_SPACE_SIZE]; + } + + /** Acknowledges an OUT packet to the host on the currently selected endpoint, freeing up the endpoint + * for the next packet and switching to the alternative endpoint bank if double banked. + * + * \ingroup Group_EndpointPacketManagement_UC3 + */ + static inline void Endpoint_ClearOUT(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearOUT(void) + { + (&AVR32_USBB.UESTA0CLR)[USB_Endpoint_SelectedEndpoint].rxoutic = true; + (&AVR32_USBB.UECON0CLR)[USB_Endpoint_SelectedEndpoint].fifoconc = true; + USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint] = &AVR32_USBB_SLAVE[USB_Endpoint_SelectedEndpoint * ENDPOINT_HSB_ADDRESS_SPACE_SIZE]; + } + + /** Stalls the current endpoint, indicating to the host that a logical problem occurred with the + * indicated endpoint and that the current transfer sequence should be aborted. This provides a + * way for devices to indicate invalid commands to the host so that the current transfer can be + * aborted and the host can begin its own recovery sequence. + * + * The currently selected endpoint remains stalled until either the \ref Endpoint_ClearStall() macro + * is called, or the host issues a CLEAR FEATURE request to the device for the currently selected + * endpoint. + * + * \ingroup Group_EndpointPacketManagement_UC3 + */ + static inline void Endpoint_StallTransaction(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_StallTransaction(void) + { + (&AVR32_USBB.UECON0SET)[USB_Endpoint_SelectedEndpoint].stallrqs = true; + } + + /** Clears the STALL condition on the currently selected endpoint. + * + * \ingroup Group_EndpointPacketManagement_UC3 + */ + static inline void Endpoint_ClearStall(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearStall(void) + { + (&AVR32_USBB.UECON0CLR)[USB_Endpoint_SelectedEndpoint].stallrqc = true; + } + + /** Determines if the currently selected endpoint is stalled, \c false otherwise. + * + * \ingroup Group_EndpointPacketManagement_UC3 + * + * \return Boolean \c true if the currently selected endpoint is stalled, \c false otherwise. + */ + static inline bool Endpoint_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsStalled(void) + { + return (&AVR32_USBB.UECON0)[USB_Endpoint_SelectedEndpoint].stallrq; + } + + /** Resets the data toggle of the currently selected endpoint. */ + static inline void Endpoint_ResetDataToggle(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetDataToggle(void) + { + (&AVR32_USBB.UECON0SET)[USB_Endpoint_SelectedEndpoint].rstdts = true; + } + + /** Sets the direction of the currently selected endpoint. + * + * \param[in] DirectionMask New endpoint direction, as a \c ENDPOINT_DIR_* mask. + */ + static inline void Endpoint_SetEndpointDirection(const uint32_t DirectionMask) ATTR_ALWAYS_INLINE; + static inline void Endpoint_SetEndpointDirection(const uint32_t DirectionMask) + { + (&AVR32_USBB.UECFG0)[USB_Endpoint_SelectedEndpoint].epdir = (DirectionMask == ENDPOINT_DIR_IN); + } + + /** Reads one byte from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_UC3 + * + * \return Next byte in the currently selected endpoint's FIFO buffer. + */ + static inline uint8_t Endpoint_Read_8(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_Read_8(void) + { + return *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + } + + /** Writes one byte to the currently selected endpoint's bank, for IN direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_UC3 + * + * \param[in] Data Data to write into the the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_8(const uint8_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_8(const uint8_t Data) + { + *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = Data; + } + + /** Discards one byte from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_UC3 + */ + static inline void Endpoint_Discard_8(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_8(void) + { + uint8_t Dummy; + + Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + + (void)Dummy; + } + + /** Reads two bytes from the currently selected endpoint's bank in little endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_UC3 + * + * \return Next two bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_Read_16_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_Read_16_LE(void) + { + uint16_t Byte0 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + uint16_t Byte1 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + + return ((Byte1 << 8) | Byte0); + } + + /** Reads two bytes from the currently selected endpoint's bank in big endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_UC3 + * + * \return Next two bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_Read_16_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_Read_16_BE(void) + { + uint16_t Byte0 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + uint16_t Byte1 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + + return ((Byte0 << 8) | Byte1); + } + + /** Writes two bytes to the currently selected endpoint's bank in little endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_UC3 + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_16_LE(const uint16_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_16_LE(const uint16_t Data) + { + *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data & 0xFF); + *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 8); + } + + /** Writes two bytes to the currently selected endpoint's bank in big endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_UC3 + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_16_BE(const uint16_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_16_BE(const uint16_t Data) + { + *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 8); + *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data & 0xFF); + } + + /** Discards two bytes from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_UC3 + */ + static inline void Endpoint_Discard_16(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_16(void) + { + uint8_t Dummy; + + Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + + (void)Dummy; + } + + /** Reads four bytes from the currently selected endpoint's bank in little endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_UC3 + * + * \return Next four bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint32_t Endpoint_Read_32_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_Read_32_LE(void) + { + uint32_t Byte0 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + uint32_t Byte1 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + uint32_t Byte2 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + uint32_t Byte3 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + + return ((Byte3 << 24) | (Byte2 << 16) | (Byte1 << 8) | Byte0); + } + + /** Reads four bytes from the currently selected endpoint's bank in big endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_UC3 + * + * \return Next four bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint32_t Endpoint_Read_32_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_Read_32_BE(void) + { + uint32_t Byte0 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + uint32_t Byte1 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + uint32_t Byte2 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + uint32_t Byte3 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + + return ((Byte0 << 24) | (Byte1 << 16) | (Byte2 << 8) | Byte3); + } + + /** Writes four bytes to the currently selected endpoint's bank in little endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_UC3 + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_32_LE(const uint32_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_32_LE(const uint32_t Data) + { + *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data & 0xFF); + *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 8); + *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 16); + *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 24); + } + + /** Writes four bytes to the currently selected endpoint's bank in big endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_UC3 + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_32_BE(const uint32_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_32_BE(const uint32_t Data) + { + *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 24); + *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 16); + *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 8); + *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data & 0xFF); + } + + /** Discards four bytes from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_UC3 + */ + static inline void Endpoint_Discard_32(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_32(void) + { + uint8_t Dummy; + + Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++); + + (void)Dummy; + } + + /* External Variables: */ + /** Global indicating the maximum packet size of the default control endpoint located at address + * 0 in the device. This value is set to the value indicated in the device descriptor in the user + * project once the USB interface is initialized into device mode. + * + * If space is an issue, it is possible to fix this to a static value by defining the control + * endpoint size in the \c FIXED_CONTROL_ENDPOINT_SIZE token passed to the compiler in the makefile + * via the -D switch. When a fixed control endpoint size is used, the size is no longer dynamically + * read from the descriptors at runtime and instead fixed to the given value. When used, it is + * important that the descriptor control endpoint size value matches the size given as the + * \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token + * be used in the device descriptors to ensure this. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) + extern uint8_t USB_Device_ControlEndpointSize; + #else + #define USB_Device_ControlEndpointSize FIXED_CONTROL_ENDPOINT_SIZE + #endif + + /* Function Prototypes: */ + /** Configures a table of endpoint descriptions, in sequence. This function can be used to configure multiple + * endpoints at the same time. + * + * \note Endpoints with a zero address will be ignored, thus this function cannot be used to configure the + * control endpoint. + * + * \param[in] Table Pointer to a table of endpoint descriptions. + * \param[in] Entries Number of entries in the endpoint table to configure. + * + * \return Boolean \c true if all endpoints configured successfully, \c false otherwise. + */ + bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries); + + /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, + * with respect to the data direction. This is a convenience function which can be used to + * simplify user control request handling. + * + * \note This routine should not be called on non CONTROL type endpoints. + */ + void Endpoint_ClearStatusStage(void); + + /** Spin-loops until the currently selected non-control endpoint is ready for the next packet of data + * to be read or written to it. + * + * \note This routine should not be called on CONTROL type endpoints. + * + * \ingroup Group_EndpointRW_UC3 + * + * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t Endpoint_WaitUntilReady(void); + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/Host_UC3.c b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Host_UC3.c new file mode 100644 index 0000000000..2c182ab69c --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Host_UC3.c @@ -0,0 +1,297 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_UC3) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#define __INCLUDE_FROM_HOST_C +#include "../Host.h" + +void USB_Host_ProcessNextHostState(void) +{ + uint8_t ErrorCode = HOST_ENUMERROR_NoError; + uint8_t SubErrorCode = HOST_ENUMERROR_NoError; + + static uint16_t WaitMSRemaining; + static uint8_t PostWaitState; + + switch (USB_HostState) + { + case HOST_STATE_WaitForDevice: + if (WaitMSRemaining) + { + if ((SubErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful) + { + USB_HostState = PostWaitState; + ErrorCode = HOST_ENUMERROR_WaitStage; + break; + } + + if (!(--WaitMSRemaining)) + USB_HostState = PostWaitState; + } + + break; + case HOST_STATE_Powered: + WaitMSRemaining = HOST_DEVICE_SETTLE_DELAY_MS; + + USB_HostState = HOST_STATE_Powered_WaitForDeviceSettle; + break; + case HOST_STATE_Powered_WaitForDeviceSettle: + if (WaitMSRemaining--) + { + Delay_MS(1); + break; + } + else + { + USB_Host_VBUS_Manual_Off(); + + USB_OTGPAD_On(); + USB_Host_VBUS_Auto_Enable(); + USB_Host_VBUS_Auto_On(); + + #if defined(NO_AUTO_VBUS_MANAGEMENT) + USB_Host_VBUS_Manual_Enable(); + USB_Host_VBUS_Manual_On(); + #endif + + USB_HostState = HOST_STATE_Powered_WaitForConnect; + } + + break; + case HOST_STATE_Powered_WaitForConnect: + if (USB_INT_HasOccurred(USB_INT_DCONNI)) + { + USB_INT_Clear(USB_INT_DCONNI); + USB_INT_Clear(USB_INT_DDISCI); + + USB_INT_Clear(USB_INT_VBERRI); + USB_INT_Enable(USB_INT_VBERRI); + + USB_Host_ResumeBus(); + Pipe_ClearPipes(); + + HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Powered_DoReset); + } + + break; + case HOST_STATE_Powered_DoReset: + USB_Host_ResetDevice(); + + HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe); + break; + case HOST_STATE_Powered_ConfigPipe: + if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, PIPE_CONTROLPIPE_DEFAULT_SIZE, 1))) + { + ErrorCode = HOST_ENUMERROR_PipeConfigError; + SubErrorCode = 0; + break; + } + + USB_HostState = HOST_STATE_Default; + break; + case HOST_STATE_Default: + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_GetDescriptor, + .wValue = (DTYPE_Device << 8), + .wIndex = 0, + .wLength = 8, + }; + + uint8_t DataBuffer[8]; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + if ((SubErrorCode = USB_Host_SendControlRequest(DataBuffer)) != HOST_SENDCONTROL_Successful) + { + ErrorCode = HOST_ENUMERROR_ControlError; + break; + } + + USB_Host_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, Endpoint0Size)]; + + USB_Host_ResetDevice(); + + HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset); + break; + case HOST_STATE_Default_PostReset: + if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, USB_Host_ControlPipeSize, 1))) + { + ErrorCode = HOST_ENUMERROR_PipeConfigError; + SubErrorCode = 0; + break; + } + + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_SetAddress, + .wValue = USB_HOST_DEVICEADDRESS, + .wIndex = 0, + .wLength = 0, + }; + + if ((SubErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful) + { + ErrorCode = HOST_ENUMERROR_ControlError; + break; + } + + HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Default_PostAddressSet); + break; + case HOST_STATE_Default_PostAddressSet: + USB_Host_SetDeviceAddress(USB_HOST_DEVICEADDRESS); + + USB_HostState = HOST_STATE_Addressed; + + EVENT_USB_Host_DeviceEnumerationComplete(); + break; + + default: + break; + } + + if ((ErrorCode != HOST_ENUMERROR_NoError) && (USB_HostState != HOST_STATE_Unattached)) + { + EVENT_USB_Host_DeviceEnumerationFailed(ErrorCode, SubErrorCode); + + USB_Host_VBUS_Auto_Off(); + + EVENT_USB_Host_DeviceUnattached(); + + USB_ResetInterface(); + } +} + +uint8_t USB_Host_WaitMS(uint8_t MS) +{ + bool BusSuspended = USB_Host_IsBusSuspended(); + uint8_t ErrorCode = HOST_WAITERROR_Successful; + bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI); + + USB_INT_Disable(USB_INT_HSOFI); + USB_INT_Clear(USB_INT_HSOFI); + + USB_Host_ResumeBus(); + + while (MS) + { + if (USB_INT_HasOccurred(USB_INT_HSOFI)) + { + USB_INT_Clear(USB_INT_HSOFI); + MS--; + } + + if ((USB_HostState == HOST_STATE_Unattached) || (USB_CurrentMode != USB_MODE_Host)) + { + ErrorCode = HOST_WAITERROR_DeviceDisconnect; + + break; + } + + if (Pipe_IsError()) + { + Pipe_ClearError(); + ErrorCode = HOST_WAITERROR_PipeError; + + break; + } + + if (Pipe_IsStalled()) + { + Pipe_ClearStall(); + ErrorCode = HOST_WAITERROR_SetupStalled; + + break; + } + } + + if (BusSuspended) + USB_Host_SuspendBus(); + + if (HSOFIEnabled) + USB_INT_Enable(USB_INT_HSOFI); + + return ErrorCode; +} + +static void USB_Host_ResetDevice(void) +{ + bool BusSuspended = USB_Host_IsBusSuspended(); + + USB_INT_Disable(USB_INT_DDISCI); + + USB_Host_ResetBus(); + while (!(USB_Host_IsBusResetComplete())); + USB_Host_ResumeBus(); + + USB_Host_ConfigurationNumber = 0; + + bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI); + + USB_INT_Disable(USB_INT_HSOFI); + USB_INT_Clear(USB_INT_HSOFI); + + for (uint8_t MSRem = 10; MSRem != 0; MSRem--) + { + /* Workaround for powerless-pull-up devices. After a USB bus reset, + all disconnection interrupts are suppressed while a USB frame is + looked for - if it is found within 10ms, the device is still + present. */ + + if (USB_INT_HasOccurred(USB_INT_HSOFI)) + { + USB_INT_Clear(USB_INT_HSOFI); + USB_INT_Clear(USB_INT_DDISCI); + break; + } + + Delay_MS(1); + } + + if (HSOFIEnabled) + USB_INT_Enable(USB_INT_HSOFI); + + if (BusSuspended) + USB_Host_SuspendBus(); + + USB_INT_Enable(USB_INT_DDISCI); +} + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/Host_UC3.h b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Host_UC3.h new file mode 100644 index 0000000000..5338f72089 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Host_UC3.h @@ -0,0 +1,363 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Host definitions for the AVR32 UC3B microcontrollers. + * \copydetails Group_Host_UC3B + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_Host + * \defgroup Group_Host_UC3B Host Management (UC3B) + * \brief USB Host definitions for the AVR32 UC3B microcontrollers. + * + * Architecture specific USB Host definitions for the Atmel 32-bit AVR UC3B microcontrollers. + * + * @{ + */ + +#ifndef __USBHOST_UC3B_H__ +#define __USBHOST_UC3B_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../StdDescriptors.h" + #include "../Pipe.h" + #include "../USBInterrupt.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Indicates the fixed USB device address which any attached device is enumerated to when in + * host mode. As only one USB device may be attached to the AVR in host mode at any one time + * and that the address used is not important (other than the fact that it is non-zero), a + * fixed value is specified by the library. + */ + #define USB_HOST_DEVICEADDRESS 1 + + #if !defined(HOST_DEVICE_SETTLE_DELAY_MS) || defined(__DOXYGEN__) + /** Constant for the delay in milliseconds after a device is connected before the library + * will start the enumeration process. Some devices require a delay of up to 5 seconds + * after connection before the enumeration process can start or incorrect operation will + * occur. + * + * The default delay value may be overridden in the user project makefile by defining the + * \c HOST_DEVICE_SETTLE_DELAY_MS token to the required delay in milliseconds, and passed to the + * compiler using the -D switch. + */ + #define HOST_DEVICE_SETTLE_DELAY_MS 1000 + #endif + + /* Enums: */ + /** Enum for the error codes for the \ref EVENT_USB_Host_HostError() event. + * + * \see \ref Group_Events for more information on this event. + */ + enum USB_Host_ErrorCodes_t + { + HOST_ERROR_VBusVoltageDip = 0, /**< VBUS voltage dipped to an unacceptable level. This + * error may be the result of an attached device drawing + * too much current from the VBUS line, or due to the + * AVR's power source being unable to supply sufficient + * current. + */ + }; + + /** Enum for the error codes for the \ref EVENT_USB_Host_DeviceEnumerationFailed() event. + * + * \see \ref Group_Events for more information on this event. + */ + enum USB_Host_EnumerationErrorCodes_t + { + HOST_ENUMERROR_NoError = 0, /**< No error occurred. Used internally, this is not a valid + * ErrorCode parameter value for the \ref EVENT_USB_Host_DeviceEnumerationFailed() + * event. + */ + HOST_ENUMERROR_WaitStage = 1, /**< One of the delays between enumeration steps failed + * to complete successfully, due to a timeout or other + * error. + */ + HOST_ENUMERROR_NoDeviceDetected = 2, /**< No device was detected, despite the USB data lines + * indicating the attachment of a device. + */ + HOST_ENUMERROR_ControlError = 3, /**< One of the enumeration control requests failed to + * complete successfully. + */ + HOST_ENUMERROR_PipeConfigError = 4, /**< The default control pipe (address 0) failed to + * configure correctly. + */ + }; + + /* Inline Functions: */ + /** Returns the current USB frame number, when in host mode. Every millisecond the USB bus is active (i.e. not suspended) + * the frame number is incremented by one. + * + * \return Current USB frame number from the USB controller. + */ + static inline uint16_t USB_Host_GetFrameNumber(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t USB_Host_GetFrameNumber(void) + { + return AVR32_USBB_UHFNUM; + } + + #if !defined(NO_SOF_EVENTS) + /** Enables the host mode Start Of Frame events. When enabled, this causes the + * \ref EVENT_USB_Host_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, + * at the start of each USB frame when a device is enumerated while in host mode. + * + * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Host_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_EnableSOFEvents(void) + { + USB_INT_Enable(USB_INT_HSOFI); + } + + /** Disables the host mode Start Of Frame events. When disabled, this stops the firing of the + * \ref EVENT_USB_Host_StartOfFrame() event when enumerated in host mode. + * + * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Host_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_DisableSOFEvents(void) + { + USB_INT_Disable(USB_INT_HSOFI); + } + #endif + + /** Resets the USB bus, including the endpoints in any attached device and pipes on the AVR host. + * USB bus resets leave the default control pipe configured (if already configured). + * + * If the USB bus has been suspended prior to issuing a bus reset, the attached device will be + * woken up automatically and the bus resumed after the reset has been correctly issued. + */ + static inline void USB_Host_ResetBus(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ResetBus(void) + { + AVR32_USBB.UHCON.reset = true; + } + + /** Determines if a previously issued bus reset (via the \ref USB_Host_ResetBus() macro) has + * completed. + * + * \return Boolean \c true if no bus reset is currently being sent, \c false otherwise. + */ + static inline bool USB_Host_IsBusResetComplete(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsBusResetComplete(void) + { + return AVR32_USBB.UHCON.reset; + } + + /** Resumes USB communications with an attached and enumerated device, by resuming the transmission + * of the 1MS Start Of Frame messages to the device. When resumed, USB communications between the + * host and attached device may occur. + */ + static inline void USB_Host_ResumeBus(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ResumeBus(void) + { + AVR32_USBB.UHCON.sofe = true; + } + + /** Suspends the USB bus, preventing any communications from occurring between the host and attached + * device until the bus has been resumed. This stops the transmission of the 1MS Start Of Frame + * messages to the device. + * + * \note While the USB bus is suspended, all USB interrupt sources are also disabled; this means that + * some events (such as device disconnections) will not fire until the bus is resumed. + */ + static inline void USB_Host_SuspendBus(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_SuspendBus(void) + { + AVR32_USBB.UHCON.sofe = false; + } + + /** Determines if the USB bus has been suspended via the use of the \ref USB_Host_SuspendBus() macro, + * false otherwise. While suspended, no USB communications can occur until the bus is resumed, + * except for the Remote Wakeup event from the device if supported. + * + * \return Boolean \c true if the bus is currently suspended, \c false otherwise. + */ + static inline bool USB_Host_IsBusSuspended(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsBusSuspended(void) + { + return AVR32_USBB.UHCON.sofe; + } + + /** Determines if the attached device is currently enumerated in Full Speed mode (12Mb/s), or + * false if the attached device is enumerated in Low Speed mode (1.5Mb/s). + * + * \return Boolean \c true if the attached device is enumerated in Full Speed mode, \c false otherwise. + */ + static inline bool USB_Host_IsDeviceFullSpeed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsDeviceFullSpeed(void) + { + return (AVR32_USBB.USBSTA.speed == AVR32_USBB_SPEED_FULL); + } + + /** Determines if the attached device is currently issuing a Remote Wakeup request, requesting + * that the host resume the USB bus and wake up the device, \c false otherwise. + * + * \return Boolean \c true if the attached device has sent a Remote Wakeup request, \c false otherwise. + */ + static inline bool USB_Host_IsRemoteWakeupSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsRemoteWakeupSent(void) + { + return AVR32_USBB.UHINT.rxrsmi; + } + + /** Clears the flag indicating that a Remote Wakeup request has been issued by an attached device. */ + static inline void USB_Host_ClearRemoteWakeupSent(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ClearRemoteWakeupSent(void) + { + AVR32_USBB.UHINTCLR.rxrsmic = true; + } + + /** Accepts a Remote Wakeup request from an attached device. This must be issued in response to + * a device's Remote Wakeup request within 2ms for the request to be accepted and the bus to + * be resumed. + */ + static inline void USB_Host_ResumeFromWakeupRequest(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ResumeFromWakeupRequest(void) + { + AVR32_USBB.UHCON.resume = true; + } + + /** Determines if a resume from Remote Wakeup request is currently being sent to an attached + * device. + * + * \return Boolean \c true if no resume request is currently being sent, \c false otherwise. + */ + static inline bool USB_Host_IsResumeFromWakeupRequestSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsResumeFromWakeupRequestSent(void) + { + return AVR32_USBB.UHCON.resume; + } + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + static inline void USB_Host_HostMode_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_HostMode_On(void) + { + // Not required for UC3B + } + + static inline void USB_Host_HostMode_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_HostMode_Off(void) + { + // Not required for UC3B + } + + static inline void USB_Host_VBUS_Auto_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Auto_Enable(void) + { + AVR32_USBB.USBCON.vbushwc = false; + } + + static inline void USB_Host_VBUS_Manual_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Manual_Enable(void) + { + AVR32_USBB.USBCON.vbushwc = true; + } + + static inline void USB_Host_VBUS_Auto_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Auto_On(void) + { + AVR32_USBB.USBSTASET.vbusrqs = true; + } + + static inline void USB_Host_VBUS_Manual_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Manual_On(void) + { + AVR32_USBB.USBSTASET.vbusrqs = true; + } + + static inline void USB_Host_VBUS_Auto_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Auto_Off(void) + { + AVR32_USBB.USBSTACLR.vbusrqc = true; + } + + static inline void USB_Host_VBUS_Manual_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Manual_Off(void) + { + AVR32_USBB.USBSTACLR.vbusrqc = true; + } + + static inline void USB_Host_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void USB_Host_SetDeviceAddress(const uint8_t Address) + { + AVR32_USBB.UHADDR1.uhaddr_p0 = Address; + AVR32_USBB.UHADDR1.uhaddr_p1 = Address; + AVR32_USBB.UHADDR1.uhaddr_p2 = Address; + AVR32_USBB.UHADDR1.uhaddr_p3 = Address; + AVR32_USBB.UHADDR2.uhaddr_p4 = Address; + AVR32_USBB.UHADDR2.uhaddr_p5 = Address; + AVR32_USBB.UHADDR2.uhaddr_p6 = Address; + } + + /* Enums: */ + enum USB_Host_WaitMSErrorCodes_t + { + HOST_WAITERROR_Successful = 0, + HOST_WAITERROR_DeviceDisconnect = 1, + HOST_WAITERROR_PipeError = 2, + HOST_WAITERROR_SetupStalled = 3, + }; + + /* Function Prototypes: */ + void USB_Host_ProcessNextHostState(void); + uint8_t USB_Host_WaitMS(uint8_t MS); + + #if defined(__INCLUDE_FROM_HOST_C) + static void USB_Host_ResetDevice(void); + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.c b/lib/lufa/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.c new file mode 100644 index 0000000000..27426ada0b --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.c @@ -0,0 +1,166 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_UC3) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#include "PipeStream_UC3.h" + +uint8_t Pipe_Discard_Stream(uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t ErrorCode; + uint16_t BytesInTransfer = 0; + + Pipe_SetPipeToken(PIPE_TOKEN_IN); + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + Length -= *BytesProcessed; + + while (Length) + { + if (!(Pipe_IsReadWriteAllowed())) + { + Pipe_ClearIN(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return PIPE_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + } + else + { + Pipe_Discard_8(); + + Length--; + BytesInTransfer++; + } + } + + return PIPE_RWSTREAM_NoError; +} + +uint8_t Pipe_Null_Stream(uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t ErrorCode; + uint16_t BytesInTransfer = 0; + + Pipe_SetPipeToken(PIPE_TOKEN_OUT); + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + Length -= *BytesProcessed; + + while (Length) + { + if (!(Pipe_IsReadWriteAllowed())) + { + Pipe_ClearOUT(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return PIPE_RWSTREAM_IncompleteTransfer; + } + + USB_USBTask(); + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + } + else + { + Pipe_Write_8(0); + + Length--; + BytesInTransfer++; + } + } + + return PIPE_RWSTREAM_NoError; +} + +/* The following abuses the C preprocessor in order to copy-paste common code with slight alterations, + * so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */ + +#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_LE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_TOKEN PIPE_TOKEN_OUT +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(*BufferPtr) +#include "Template/Template_Pipe_RW.c" + +#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_BE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_TOKEN PIPE_TOKEN_OUT +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(*BufferPtr) +#include "Template/Template_Pipe_RW.c" + +#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_LE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_TOKEN PIPE_TOKEN_IN +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_8() +#include "Template/Template_Pipe_RW.c" + +#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_BE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_TOKEN PIPE_TOKEN_IN +#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_8() +#include "Template/Template_Pipe_RW.c" + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.h b/lib/lufa/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.h new file mode 100644 index 0000000000..cc34442084 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.h @@ -0,0 +1,352 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Pipe data stream transmission and reception management for the AVR32 UC3 microcontrollers. + * \copydetails Group_PipeStreamRW_UC3 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_PipeStreamRW + * \defgroup Group_PipeStreamRW_UC3 Read/Write of Multi-Byte Streams (UC3) + * \brief Pipe data stream transmission and reception management for the Atmel AVR32 UC3 architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing of data streams from + * and to pipes. + * + * @{ + */ + +#ifndef __PIPE_STREAM_UC3_H__ +#define __PIPE_STREAM_UC3_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBMode.h" + #include "../USBTask.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Function Prototypes: */ + /** \name Stream functions for null data */ + //@{ + + /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host + * as needed. The last packet is not automatically discarded once the remaining bytes has been read; the + * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or + * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer + * will instead be performed as a series of chunks. Each time the pipe bank becomes empty while there is still data + * to process (and after the current packet has been acknowledged) the BytesProcessed location will be updated with + * the total number of bytes processed in the stream, and the function will exit with an error code of + * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to + * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed + * value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t ErrorCode; + * + * if ((ErrorCode = Pipe_Discard_Stream(512, NULL)) != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Pipe_Discard_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[in] Length Number of bytes to discard via the currently selected pipe. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be processed at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Discard_Stream(uint16_t Length, + uint16_t* const BytesProcessed); + + /** Writes a given number of zeroed bytes to the pipe, sending full pipe packets from the host to the device + * as needed. The last packet is not automatically sent once the remaining bytes has been written; the + * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearOUT() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or + * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer + * will instead be performed as a series of chunks. Each time the pipe bank becomes full while there is still data + * to process (and after the current packet transmission has been initiated) the BytesProcessed location will be + * updated with the total number of bytes processed in the stream, and the function will exit with an error code of + * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to + * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed + * value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t ErrorCode; + * + * if ((ErrorCode = Pipe_Null_Stream(512, NULL)) != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Pipe_Null_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[in] Length Number of zero bytes to write via the currently selected pipe. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be processed at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Null_Stream(uint16_t Length, + uint16_t* const BytesProcessed); + + //@} + + /** \name Stream functions for RAM source/destination data */ + //@{ + + /** Writes the given number of bytes to the pipe from the given buffer in little endian, + * sending full packets to the device as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is + * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the pipe bank becomes full while there is still data to process (and after the current + * packet transmission has been initiated) the BytesProcessed location will be updated with the + * total number of bytes processed in the stream, and the function will exit with an error code of + * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * + * if ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream), + * NULL)) != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream), + * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_Stream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the pipe from the given buffer in big endian, + * sending full packets to the device as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is + * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. + * + * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_Stream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the pipe into the given buffer in little endian, + * sending full packets to the device as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is + * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the pipe bank becomes empty while there is still data to process (and after the current + * packet has been acknowledged) the BytesProcessed location will be updated with the total number + * of bytes processed in the stream, and the function will exit with an error code of + * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * + * if ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream), + * NULL)) != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream), + * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != PIPE_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Read_Stream_LE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the pipe into the given buffer in big endian, + * sending full packets to the device as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is + * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. + * + * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should + * updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Read_Stream_BE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c new file mode 100644 index 0000000000..73cf360783 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c @@ -0,0 +1,209 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_UC3) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#include "../Pipe.h" + +uint8_t USB_Host_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE; + +volatile uint32_t USB_Pipe_SelectedPipe = PIPE_CONTROLPIPE; +volatile uint8_t* USB_Pipe_FIFOPos[PIPE_TOTAL_PIPES]; + +bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Pipe_ConfigurePipe(Table[i].Address, Table[i].Type, Table[i].EndpointAddress, Table[i].Size, Table[i].Banks))) + { + return false; + } + } + + return true; +} + +bool Pipe_ConfigurePipe(const uint8_t Address, + const uint8_t Type, + const uint8_t EndpointAddress, + const uint16_t Size, + const uint8_t Banks) +{ + uint8_t Number = (Address & PIPE_EPNUM_MASK); + uint8_t Token = (Address & PIPE_DIR_IN) ? PIPE_TOKEN_IN : PIPE_TOKEN_OUT; + + if (Number >= PIPE_TOTAL_PIPES) + return false; + + if (Type == EP_TYPE_CONTROL) + Token = PIPE_TOKEN_SETUP; + + USB_Pipe_FIFOPos[Number] = &AVR32_USBB_SLAVE[Number * PIPE_HSB_ADDRESS_SPACE_SIZE]; + +#if defined(ORDERED_EP_CONFIG) + Pipe_SelectPipe(Number); + Pipe_EnablePipe(); + + (&AVR32_USBB.upcfg0)[Number] = 0; + (&AVR32_USBB.upcfg0)[Number] = (AVR32_USBB_ALLOC_MASK | + ((uint32_t)Type << AVR32_USBB_PTYPE_OFFSET) | + ((uint32_t)Token << AVR32_USBB_PTOKEN_OFFSET) | + ((Banks > 1) ? AVR32_USBB_PBK_MASK : 0) | + Pipe_BytesToEPSizeMask(Size) | + ((uint32_t)Number << AVR32_USBB_PEPNUM_OFFSET)); + + Pipe_SetInfiniteINRequests(); + + return Pipe_IsConfigured(); +#else + for (uint8_t PNum = Number; PNum < PIPE_TOTAL_PIPES; PNum++) + { + uint32_t UPCFG0Temp; + + Pipe_SelectPipe(PNum); + + if (PNum == Number) + { + UPCFG0Temp = (AVR32_USBB_ALLOC_MASK | + ((uint32_t)Type << AVR32_USBB_PTYPE_OFFSET) | + ((uint32_t)Token << AVR32_USBB_PTOKEN_OFFSET) | + ((Banks > 1) ? AVR32_USBB_PBK_MASK : 0) | + Pipe_BytesToEPSizeMask(Size) | + ((EndpointAddress & PIPE_EPNUM_MASK) << AVR32_USBB_PEPNUM_OFFSET)); + } + else + { + UPCFG0Temp = (&AVR32_USBB.upcfg0)[PNum]; + } + + if (!(UPCFG0Temp & AVR32_USBB_ALLOC_MASK)) + continue; + + Pipe_DisablePipe(); + (&AVR32_USBB.upcfg0)[PNum] &= ~AVR32_USBB_ALLOC_MASK; + + Pipe_EnablePipe(); + (&AVR32_USBB.upcfg0)[PNum] = UPCFG0Temp; + + Pipe_SetInfiniteINRequests(); + + if (!(Pipe_IsConfigured())) + return false; + } + + Pipe_SelectPipe(Number); + return true; +#endif +} + +void Pipe_ClearPipes(void) +{ + for (uint8_t PNum = 0; PNum < PIPE_TOTAL_PIPES; PNum++) + { + Pipe_SelectPipe(PNum); + (&AVR32_USBB.upcfg0)[PNum] = 0; + (&AVR32_USBB.upcon0clr)[PNum] = -1; + USB_Pipe_FIFOPos[PNum] = &AVR32_USBB_SLAVE[PNum * 0x10000]; + Pipe_DisablePipe(); + } +} + +bool Pipe_IsEndpointBound(const uint8_t EndpointAddress) +{ + uint8_t PrevPipeNumber = Pipe_GetCurrentPipe(); + + for (uint8_t PNum = 0; PNum < PIPE_TOTAL_PIPES; PNum++) + { + Pipe_SelectPipe(PNum); + + if (!(Pipe_IsConfigured())) + continue; + + if (Pipe_GetBoundEndpointAddress() == EndpointAddress) + return true; + } + + Pipe_SelectPipe(PrevPipeNumber); + return false; +} + +uint8_t Pipe_WaitUntilReady(void) +{ + #if (USB_STREAM_TIMEOUT_MS < 0xFF) + uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #else + uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #endif + + uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber(); + + for (;;) + { + if (Pipe_GetPipeToken() == PIPE_TOKEN_IN) + { + if (Pipe_IsINReceived()) + return PIPE_READYWAIT_NoError; + } + else + { + if (Pipe_IsOUTReady()) + return PIPE_READYWAIT_NoError; + } + + if (Pipe_IsStalled()) + return PIPE_READYWAIT_PipeStalled; + else if (USB_HostState == HOST_STATE_Unattached) + return PIPE_READYWAIT_DeviceDisconnected; + + uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber(); + + if (CurrentFrameNumber != PreviousFrameNumber) + { + PreviousFrameNumber = CurrentFrameNumber; + + if (!(TimeoutMSRem--)) + return PIPE_READYWAIT_Timeout; + } + } +} + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h new file mode 100644 index 0000000000..12e0dcd62d --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h @@ -0,0 +1,924 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Pipe definitions for the AVR32 UC3 microcontrollers. + * \copydetails Group_PipeManagement_UC3 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_PipeRW + * \defgroup Group_PipeRW_UC3 Pipe Data Reading and Writing (UC3) + * \brief Pipe data read/write definitions for the Atmel AVR32 UC3 architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing from and to pipes. + */ + +/** \ingroup Group_PipePrimitiveRW + * \defgroup Group_PipePrimitiveRW_UC3 Read/Write of Primitive Data Types (UC3) + * \brief Pipe primitive data read/write definitions for the Atmel AVR32 UC3 architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing of primitive data types + * from and to pipes. + */ + +/** \ingroup Group_PipePacketManagement + * \defgroup Group_PipePacketManagement_UC3 Pipe Packet Management (UC3) + * \brief Pipe packet management definitions for the Atmel AVR32 UC3 architecture. + * + * Functions, macros, variables, enums and types related to packet management of pipes. + */ + +/** \ingroup Group_PipeControlReq + * \defgroup Group_PipeControlReq_UC3 Pipe Control Request Management (UC3) + * \brief Pipe control request management definitions for the Atmel AVR32 UC3 architecture. + * + * Module for host mode request processing. This module allows for the transmission of standard, class and + * vendor control requests to the default control endpoint of an attached device while in host mode. + * + * \see Chapter 9 of the USB 2.0 specification. + */ + +/** \ingroup Group_PipeManagement + * \defgroup Group_PipeManagement_UC3 Pipe Management (UC3) + * \brief Pipe management definitions for the Atmel AVR32 UC3 architecture. + * + * This module contains functions, macros and enums related to pipe management when in USB Host mode. This + * module contains the pipe management macros, as well as pipe interrupt and data send/receive functions + * for various data types. + * + * @{ + */ + +#ifndef __PIPE_UC3_H__ +#define __PIPE_UC3_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBTask.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define PIPE_HSB_ADDRESS_SPACE_SIZE (64 * 1024UL) + + /* External Variables: */ + extern volatile uint32_t USB_Pipe_SelectedPipe; + extern volatile uint8_t* USB_Pipe_FIFOPos[]; + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name Pipe Error Flag Masks */ + //@{ + /** Mask for \ref Pipe_GetErrorFlags(), indicating that an overflow error occurred in the pipe on the received data. */ + #define PIPE_ERRORFLAG_OVERFLOW (AVR32_USBB_UPSTA0_OVERFI_MASK << 8) + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a CRC error occurred in the pipe on the received data. */ + #define PIPE_ERRORFLAG_CRC16 AVR32_USBB_UPERR0_CRC16_MASK + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware timeout error occurred in the pipe. */ + #define PIPE_ERRORFLAG_TIMEOUT AVR32_USBB_UPERR0_TIMEOUT_MASK + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware PID error occurred in the pipe. */ + #define PIPE_ERRORFLAG_PID AVR32_USBB_UPERR0_PID_MASK + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data PID error occurred in the pipe. */ + #define PIPE_ERRORFLAG_DATAPID AVR32_USBB_UPERR0_DATAPID_MASK + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */ + #define PIPE_ERRORFLAG_DATATGL AVR32_USBB_UPERR0_DATATGL_MASK + //@} + + /** \name Pipe Token Masks */ + //@{ + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a SETUP token (for CONTROL type pipes), + * which will trigger a control request on the attached device when data is written to the pipe. + */ + #define PIPE_TOKEN_SETUP AVR32_USBB_UPCFG0_PTOKEN_SETUP + + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a IN token (for non-CONTROL type pipes), + * indicating that the pipe data will flow from device to host. + */ + #define PIPE_TOKEN_IN AVR32_USBB_UPCFG0_PTOKEN_IN + + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a OUT token (for non-CONTROL type pipes), + * indicating that the pipe data will flow from host to device. + */ + #define PIPE_TOKEN_OUT AVR32_USBB_UPCFG0_PTOKEN_OUT + //@} + + /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value + * in the device descriptor of the attached device. + */ + #define PIPE_CONTROLPIPE_DEFAULT_SIZE 64 + + #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) || defined(__DOXYGEN__) + /** Total number of pipes (including the default control pipe at address 0) which may be used in + * the device. + */ + #define PIPE_TOTAL_PIPES 8 + #else + #define PIPE_TOTAL_PIPES 7 + #endif + + /** Size in bytes of the largest pipe bank size possible in the device. Not all banks on each AVR + * model supports the largest bank size possible on the device; different pipe numbers support + * different maximum bank sizes. This value reflects the largest possible bank of any pipe on the + * currently selected UC3 AVR model. + */ + #define PIPE_MAX_SIZE 256 + + /* Enums: */ + /** Enum for the possible error return codes of the \ref Pipe_WaitUntilReady() function. + * + * \ingroup Group_PipeRW_UC3 + */ + enum Pipe_WaitUntilReady_ErrorCodes_t + { + PIPE_READYWAIT_NoError = 0, /**< Pipe ready for next packet, no error. */ + PIPE_READYWAIT_PipeStalled = 1, /**< The device stalled the pipe while waiting. */ + PIPE_READYWAIT_DeviceDisconnected = 2, /**< Device was disconnected from the host while waiting. */ + PIPE_READYWAIT_Timeout = 3, /**< The device failed to accept or send the next packet + * within the software timeout period set by the + * \ref USB_STREAM_TIMEOUT_MS macro. + */ + }; + + /* Inline Functions: */ + /** Indicates the number of bytes currently stored in the current pipes's selected bank. + * + * \ingroup Group_PipeRW_UC3 + * + * \return Total number of bytes in the currently selected pipe's FIFO buffer. + */ + static inline uint16_t Pipe_BytesInPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Pipe_BytesInPipe(void) + { + return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].pbyct; + } + + /** Determines the currently selected pipe's direction. + * + * \return The currently selected pipe's direction, as a \c PIPE_DIR_* mask. + */ + static inline uint8_t Pipe_GetPipeDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeDirection(void) + { + return (((&AVR32_USBB.UPCFG0)[USB_Pipe_SelectedPipe].ptoken == PIPE_TOKEN_OUT) ? PIPE_DIR_OUT : PIPE_DIR_IN); + } + + /** Returns the pipe address of the currently selected pipe. This is typically used to save the + * currently selected pipe number so that it can be restored after another pipe has been manipulated. + * + * \return Index of the currently selected pipe. + */ + static inline uint8_t Pipe_GetCurrentPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetCurrentPipe(void) + { + return (USB_Pipe_SelectedPipe | Pipe_GetPipeDirection()); + } + + /** Selects the given pipe address. Any pipe operations which do not require the pipe address to be + * indicated will operate on the currently selected pipe. + * + * \param[in] Address Address of the pipe to select. + */ + static inline void Pipe_SelectPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_SelectPipe(const uint8_t Address) + { + USB_Pipe_SelectedPipe = (Address & PIPE_EPNUM_MASK); + } + + /** Resets the desired pipe, including the pipe banks and flags. + * + * \param[in] Address Index of the pipe to reset. + */ + static inline void Pipe_ResetPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_ResetPipe(const uint8_t Address) + { + uint32_t PipeNumber = (Address & PIPE_EPNUM_MASK); + + AVR32_USBB.uprst |= (AVR32_USBB_PRST0_MASK << PipeNumber); + AVR32_USBB.uprst &= ~(AVR32_USBB_PRST0_MASK << PipeNumber); + USB_Pipe_FIFOPos[PipeNumber] = &AVR32_USBB_SLAVE[PipeNumber * PIPE_HSB_ADDRESS_SPACE_SIZE]; + } + + /** Enables the currently selected pipe so that data can be sent and received through it to and from + * an attached device. + * + * \pre The currently selected pipe must first be configured properly via \ref Pipe_ConfigurePipe(). + */ + static inline void Pipe_EnablePipe(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_EnablePipe(void) + { + AVR32_USBB.uprst |= (AVR32_USBB_PEN0_MASK << USB_Pipe_SelectedPipe); + } + + /** Disables the currently selected pipe so that data cannot be sent and received through it to and + * from an attached device. + */ + static inline void Pipe_DisablePipe(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_DisablePipe(void) + { + AVR32_USBB.uprst &= ~(AVR32_USBB_PEN0_MASK << USB_Pipe_SelectedPipe); + } + + /** Determines if the currently selected pipe is enabled, but not necessarily configured. + * + * \return Boolean \c true if the currently selected pipe is enabled, \c false otherwise. + */ + static inline bool Pipe_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsEnabled(void) + { + return ((AVR32_USBB.uprst & (AVR32_USBB_PEN0_MASK << USB_Pipe_SelectedPipe)) ? true : false); + } + + /** Gets the current pipe token, indicating the pipe's data direction and type. + * + * \return The current pipe token, as a \c PIPE_TOKEN_* mask. + */ + static inline uint8_t Pipe_GetPipeToken(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeToken(void) + { + return (&AVR32_USBB.UPCFG0)[USB_Pipe_SelectedPipe].ptoken; + } + + /** Sets the token for the currently selected pipe to one of the tokens specified by the \c PIPE_TOKEN_* + * masks. This can be used on CONTROL type pipes, to allow for bidirectional transfer of data during + * control requests, or on regular pipes to allow for half-duplex bidirectional data transfer to devices + * which have two endpoints of opposite direction sharing the same endpoint address within the device. + * + * \param[in] Token New pipe token to set the selected pipe to, as a \c PIPE_TOKEN_* mask. + */ + static inline void Pipe_SetPipeToken(const uint8_t Token) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetPipeToken(const uint8_t Token) + { + (&AVR32_USBB.UPCFG0)[USB_Pipe_SelectedPipe].ptoken = Token; + } + + /** Configures the currently selected pipe to allow for an unlimited number of IN requests. */ + static inline void Pipe_SetInfiniteINRequests(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetInfiniteINRequests(void) + { + (&AVR32_USBB.UPINRQ0)[USB_Pipe_SelectedPipe].inmode = true; + } + + /** Configures the currently selected pipe to only allow the specified number of IN requests to be + * accepted by the pipe before it is automatically frozen. + * + * \param[in] TotalINRequests Total number of IN requests that the pipe may receive before freezing. + */ + static inline void Pipe_SetFiniteINRequests(const uint8_t TotalINRequests) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetFiniteINRequests(const uint8_t TotalINRequests) + { + (&AVR32_USBB.UPINRQ0)[USB_Pipe_SelectedPipe].inmode = false; + (&AVR32_USBB.UPINRQ0)[USB_Pipe_SelectedPipe].inrq = TotalINRequests; + } + + /** Determines if the currently selected pipe is configured. + * + * \return Boolean \c true if the selected pipe is configured, \c false otherwise. + */ + static inline bool Pipe_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsConfigured(void) + { + return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].cfgok; + } + + /** Retrieves the endpoint address of the endpoint within the attached device that the currently selected + * pipe is bound to. + * + * \return Endpoint address the currently selected pipe is bound to. + */ + static inline uint8_t Pipe_GetBoundEndpointAddress(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetBoundEndpointAddress(void) + { + return ((&AVR32_USBB.UPCFG0)[USB_Pipe_SelectedPipe].pepnum | + ((Pipe_GetPipeToken() == PIPE_TOKEN_IN) ? PIPE_DIR_IN : PIPE_DIR_OUT)); + } + + /** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds. + * + * \param[in] Milliseconds Number of milliseconds between each pipe poll. + */ + static inline void Pipe_SetInterruptPeriod(const uint8_t Milliseconds) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetInterruptPeriod(const uint8_t Milliseconds) + { + (&AVR32_USBB.UPCFG0)[USB_Pipe_SelectedPipe].intfrq = Milliseconds; + } + + /** Returns a mask indicating which pipe's interrupt periods have elapsed, indicating that the pipe should + * be serviced. + * + * \return Mask whose bits indicate which pipes have interrupted. + */ + static inline uint8_t Pipe_GetPipeInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeInterrupts(void) + { + return ((AVR32_USBB.uhint & (AVR32_USBB_P6INT_MASK | AVR32_USBB_P5INT_MASK | + AVR32_USBB_P4INT_MASK | AVR32_USBB_P3INT_MASK | + AVR32_USBB_P2INT_MASK | AVR32_USBB_P1INT_MASK | + AVR32_USBB_P0INT_MASK)) >> AVR32_USBB_P0INT_OFFSET); + } + + /** Determines if the specified pipe address has interrupted (valid only for INTERRUPT type + * pipes). + * + * \param[in] Address Address of the pipe whose interrupt flag should be tested. + * + * \return Boolean \c true if the specified pipe has interrupted, \c false otherwise. + */ + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) + { + return ((AVR32_USBB.uhint & (AVR32_USBB_P0INTES_MASK << (Address & PIPE_EPNUM_MASK))) ? true : false); + } + + /** Unfreezes the selected pipe, allowing it to communicate with an attached device. */ + static inline void Pipe_Unfreeze(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Unfreeze(void) + { + (&AVR32_USBB.UPCON0CLR)[USB_Pipe_SelectedPipe].pfreezec = true; + } + + /** Freezes the selected pipe, preventing it from communicating with an attached device. */ + static inline void Pipe_Freeze(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Freeze(void) + { + (&AVR32_USBB.UPCON0SET)[USB_Pipe_SelectedPipe].pfreezes = true; + } + + /** Determines if the currently selected pipe is frozen, and not able to accept data. + * + * \return Boolean \c true if the currently selected pipe is frozen, \c false otherwise. + */ + static inline bool Pipe_IsFrozen(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsFrozen(void) + { + return (((&AVR32_USBB.UPCON0)[USB_Pipe_SelectedPipe].pfreeze) ? true : false); + } + + /** Clears the error flags for the currently selected pipe. */ + static inline void Pipe_ClearError(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearError(void) + { + (&AVR32_USBB.uperr0)[USB_Pipe_SelectedPipe] = 0; + (&AVR32_USBB.UPSTA0CLR)[USB_Pipe_SelectedPipe].overfic = true; + } + + /** Determines if the master pipe error flag is set for the currently selected pipe, indicating that + * some sort of hardware error has occurred on the pipe. + * + * \see \ref Pipe_GetErrorFlags() macro for information on retrieving the exact error flag. + * + * \return Boolean \c true if an error has occurred on the selected pipe, \c false otherwise. + */ + static inline bool Pipe_IsError(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsError(void) + { + return (((&AVR32_USBB.upsta0)[USB_Pipe_SelectedPipe] & + (AVR32_USBB_PERRI_MASK | AVR32_USBB_OVERFI_MASK)) ? true : false); + } + + /** Gets a mask of the hardware error flags which have occurred on the currently selected pipe. This + * value can then be masked against the \c PIPE_ERRORFLAG_* masks to determine what error has occurred. + * + * \return Mask comprising of \c PIPE_ERRORFLAG_* bits indicating what error has occurred on the selected pipe. + */ + static inline uint8_t Pipe_GetErrorFlags(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetErrorFlags(void) + { + + return (((&AVR32_USBB.uperr0)[USB_Pipe_SelectedPipe] & + (PIPE_ERRORFLAG_CRC16 | PIPE_ERRORFLAG_TIMEOUT | + PIPE_ERRORFLAG_PID | PIPE_ERRORFLAG_DATAPID | + PIPE_ERRORFLAG_DATATGL)) | + (((&AVR32_USBB.upsta0)[USB_Pipe_SelectedPipe] << 8) & + PIPE_ERRORFLAG_OVERFLOW)); + } + + /** Retrieves the number of busy banks in the currently selected pipe, which have been queued for + * transmission via the \ref Pipe_ClearOUT() command, or are awaiting acknowledgement via the + * \ref Pipe_ClearIN() command. + * + * \ingroup Group_PipePacketManagement_UC3 + * + * \return Total number of busy banks in the selected pipe. + */ + static inline uint8_t Pipe_GetBusyBanks(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetBusyBanks(void) + { + return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].nbusybk; + } + + /** Determines if the currently selected pipe may be read from (if data is waiting in the pipe + * bank and the pipe is an IN direction, or if the bank is not yet full if the pipe is an OUT + * direction). This function will return false if an error has occurred in the pipe, or if the pipe + * is an IN direction and no packet (or an empty packet) has been received, or if the pipe is an OUT + * direction and the pipe bank is full. + * + * \note This function is not valid on CONTROL type pipes. + * + * \ingroup Group_PipePacketManagement_UC3 + * + * \return Boolean \c true if the currently selected pipe may be read from or written to, depending + * on its direction. + */ + static inline bool Pipe_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsReadWriteAllowed(void) + { + return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].rwall; + } + + /** Determines if a packet has been received on the currently selected IN pipe from the attached device. + * + * \ingroup Group_PipePacketManagement_UC3 + * + * \return Boolean \c true if the current pipe has received an IN packet, \c false otherwise. + */ + static inline bool Pipe_IsINReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsINReceived(void) + { + return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].rxini; + } + + /** Determines if the currently selected OUT pipe is ready to send an OUT packet to the attached device. + * + * \ingroup Group_PipePacketManagement_UC3 + * + * \return Boolean \c true if the current pipe is ready for an OUT packet, \c false otherwise. + */ + static inline bool Pipe_IsOUTReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsOUTReady(void) + { + return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].txouti; + } + + /** Determines if no SETUP request is currently being sent to the attached device on the selected + * CONTROL type pipe. + * + * \ingroup Group_PipePacketManagement_UC3 + * + * \return Boolean \c true if the current pipe is ready for a SETUP packet, \c false otherwise. + */ + static inline bool Pipe_IsSETUPSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsSETUPSent(void) + { + return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].txstpi; + } + + /** Sends the currently selected CONTROL type pipe's contents to the device as a SETUP packet. + * + * \ingroup Group_PipePacketManagement_UC3 + */ + static inline void Pipe_ClearSETUP(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearSETUP(void) + { + (&AVR32_USBB.UPSTA0CLR)[USB_Pipe_SelectedPipe].txstpic = true; + (&AVR32_USBB.UPCON0CLR)[USB_Pipe_SelectedPipe].fifoconc = true; + USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe] = &AVR32_USBB_SLAVE[USB_Pipe_SelectedPipe * PIPE_HSB_ADDRESS_SPACE_SIZE]; + } + + /** Acknowledges the reception of a setup IN request from the attached device on the currently selected + * pipe, freeing the bank ready for the next packet. + * + * \ingroup Group_PipePacketManagement_UC3 + */ + static inline void Pipe_ClearIN(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearIN(void) + { + (&AVR32_USBB.UPSTA0CLR)[USB_Pipe_SelectedPipe].rxinic = true; + (&AVR32_USBB.UPCON0CLR)[USB_Pipe_SelectedPipe].fifoconc = true; + USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe] = &AVR32_USBB_SLAVE[USB_Pipe_SelectedPipe * PIPE_HSB_ADDRESS_SPACE_SIZE]; + } + + /** Sends the currently selected pipe's contents to the device as an OUT packet on the selected pipe, freeing + * the bank ready for the next packet. + * + * \ingroup Group_PipePacketManagement_UC3 + */ + static inline void Pipe_ClearOUT(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearOUT(void) + { + (&AVR32_USBB.UPSTA0CLR)[USB_Pipe_SelectedPipe].txoutic = true; + (&AVR32_USBB.UPCON0CLR)[USB_Pipe_SelectedPipe].fifoconc = true; + USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe] = &AVR32_USBB_SLAVE[USB_Pipe_SelectedPipe * PIPE_HSB_ADDRESS_SPACE_SIZE]; + } + + /** Determines if the device sent a NAK (Negative Acknowledge) in response to the last sent packet on + * the currently selected pipe. This occurs when the host sends a packet to the device, but the device + * is not currently ready to handle the packet (i.e. its endpoint banks are full). Once a NAK has been + * received, it must be cleared using \ref Pipe_ClearNAKReceived() before the previous (or any other) packet + * can be re-sent. + * + * \ingroup Group_PipePacketManagement_UC3 + * + * \return Boolean \c true if an NAK has been received on the current pipe, \c false otherwise. + */ + static inline bool Pipe_IsNAKReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsNAKReceived(void) + { + return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].nakedi; + } + + /** Clears the NAK condition on the currently selected pipe. + * + * \ingroup Group_PipePacketManagement_UC3 + * + * \see \ref Pipe_IsNAKReceived() for more details. + */ + static inline void Pipe_ClearNAKReceived(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearNAKReceived(void) + { + (&AVR32_USBB.UPSTA0CLR)[USB_Pipe_SelectedPipe].nakedic = true; + } + + /** Determines if the currently selected pipe has had the STALL condition set by the attached device. + * + * \ingroup Group_PipePacketManagement_UC3 + * + * \return Boolean \c true if the current pipe has been stalled by the attached device, \c false otherwise. + */ + static inline bool Pipe_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsStalled(void) + { + return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].rxstalldi; + } + + /** Clears the STALL condition detection flag on the currently selected pipe, but does not clear the + * STALL condition itself (this must be done via a ClearFeature control request to the device). + * + * \ingroup Group_PipePacketManagement_UC3 + */ + static inline void Pipe_ClearStall(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearStall(void) + { + (&AVR32_USBB.UPSTA0CLR)[USB_Pipe_SelectedPipe].rxstalldic = true; + USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe] = &AVR32_USBB_SLAVE[USB_Pipe_SelectedPipe * PIPE_HSB_ADDRESS_SPACE_SIZE]; + } + + /** Reads one byte from the currently selected pipe's bank, for OUT direction pipes. + * + * \ingroup Group_PipePrimitiveRW_UC3 + * + * \return Next byte in the currently selected pipe's FIFO buffer. + */ + static inline uint8_t Pipe_Read_8(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_Read_8(void) + { + return *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + } + + /** Writes one byte to the currently selected pipe's bank, for IN direction pipes. + * + * \ingroup Group_PipePrimitiveRW_UC3 + * + * \param[in] Data Data to write into the the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_8(const uint8_t Data) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_8(const uint8_t Data) + { + *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = Data; + } + + /** Discards one byte from the currently selected pipe's bank, for OUT direction pipes. + * + * \ingroup Group_PipePrimitiveRW_UC3 + */ + static inline void Pipe_Discard_8(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Discard_8(void) + { + uint8_t Dummy; + + Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + + (void)Dummy; + } + + /** Reads two bytes from the currently selected pipe's bank in little endian format, for OUT + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_UC3 + * + * \return Next two bytes in the currently selected pipe's FIFO buffer. + */ + static inline uint16_t Pipe_Read_16_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Pipe_Read_16_LE(void) + { + uint16_t Byte0 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + uint16_t Byte1 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + + return ((Byte1 << 8) | Byte0); + } + + /** Reads two bytes from the currently selected pipe's bank in big endian format, for OUT + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_UC3 + * + * \return Next two bytes in the currently selected pipe's FIFO buffer. + */ + static inline uint16_t Pipe_Read_16_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Pipe_Read_16_BE(void) + { + uint16_t Byte0 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + uint16_t Byte1 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + + return ((Byte0 << 8) | Byte1); + } + + /** Writes two bytes to the currently selected pipe's bank in little endian format, for IN + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_UC3 + * + * \param[in] Data Data to write to the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_16_LE(const uint16_t Data) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_16_LE(const uint16_t Data) + { + *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data & 0xFF); + *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 8); + } + + /** Writes two bytes to the currently selected pipe's bank in big endian format, for IN + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_UC3 + * + * \param[in] Data Data to write to the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_16_BE(const uint16_t Data) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_16_BE(const uint16_t Data) + { + *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 8); + *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data & 0xFF); + } + + /** Discards two bytes from the currently selected pipe's bank, for OUT direction pipes. + * + * \ingroup Group_PipePrimitiveRW_UC3 + */ + static inline void Pipe_Discard_16(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Discard_16(void) + { + uint8_t Dummy; + + Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + + (void)Dummy; + } + + /** Reads four bytes from the currently selected pipe's bank in little endian format, for OUT + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_UC3 + * + * \return Next four bytes in the currently selected pipe's FIFO buffer. + */ + static inline uint32_t Pipe_Read_32_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Pipe_Read_32_LE(void) + { + uint32_t Byte0 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + uint32_t Byte1 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + uint32_t Byte2 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + uint32_t Byte3 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + + return ((Byte3 << 24) | (Byte2 << 16) | (Byte1 << 8) | Byte0); + } + + /** Reads four bytes from the currently selected pipe's bank in big endian format, for OUT + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_UC3 + * + * \return Next four bytes in the currently selected pipe's FIFO buffer. + */ + static inline uint32_t Pipe_Read_32_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Pipe_Read_32_BE(void) + { + uint32_t Byte0 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + uint32_t Byte1 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + uint32_t Byte2 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + uint32_t Byte3 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + + return ((Byte0 << 24) | (Byte1 << 16) | (Byte2 << 8) | Byte3); + } + + /** Writes four bytes to the currently selected pipe's bank in little endian format, for IN + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_UC3 + * + * \param[in] Data Data to write to the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_32_LE(const uint32_t Data) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_32_LE(const uint32_t Data) + { + *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data & 0xFF); + *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 8); + *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 16); + *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 24); + } + + /** Writes four bytes to the currently selected pipe's bank in big endian format, for IN + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_UC3 + * + * \param[in] Data Data to write to the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_32_BE(const uint32_t Data) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_32_BE(const uint32_t Data) + { + *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 24); + *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 16); + *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 8); + *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data & 0xFF); + } + + /** Discards four bytes from the currently selected pipe's bank, for OUT direction pipes. + * + * \ingroup Group_PipePrimitiveRW_UC3 + */ + static inline void Pipe_Discard_32(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Discard_32(void) + { + uint8_t Dummy; + + Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++); + + (void)Dummy; + } + + /* External Variables: */ + /** Global indicating the maximum packet size of the default control pipe located at address + * 0 in the device. This value is set to the value indicated in the attached device's device + * descriptor once the USB interface is initialized into host mode and a device is attached + * to the USB bus. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + extern uint8_t USB_Host_ControlPipeSize; + + /* Function Prototypes: */ + /** Configures a table of pipe descriptions, in sequence. This function can be used to configure multiple + * pipes at the same time. + * + * \note Pipe with a zero address will be ignored, thus this function cannot be used to configure the + * control pipe. + * + * \param[in] Table Pointer to a table of pipe descriptions. + * \param[in] Entries Number of entries in the pipe table to configure. + * + * \return Boolean \c true if all pipes configured successfully, \c false otherwise. + */ + bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table, + const uint8_t Entries); + + /** Configures the specified pipe address with the given pipe type, endpoint address within the attached device, + * bank size and number of hardware banks. + * + * A newly configured pipe is frozen by default, and must be unfrozen before use via the \ref Pipe_Unfreeze() + * before being used. Pipes should be kept frozen unless waiting for data from a device while in IN mode, or + * sending data to the device in OUT mode. IN type pipes are also automatically configured to accept infinite + * numbers of IN requests without automatic freezing - this can be overridden by a call to + * \ref Pipe_SetFiniteINRequests(). + * + * \param[in] Address Pipe address to configure. + * + * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low + * Speed USB devices - refer to the USB 2.0 specification. + * + * \param[in] EndpointAddress Endpoint address within the attached device that the pipe should interface to. + * + * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to + * the USB device, or after they have been received from the USB device (depending on + * the pipe's data direction). The bank size must indicate the maximum packet size that + * the pipe can handle. + * + * \param[in] Banks Number of banks to use for the pipe being configured. + * + * \note When the \c ORDERED_EP_CONFIG compile time option is used, Pipes <b>must</b> be configured in ascending order, + * or bank corruption will occur. + * \n\n + * + * \note Certain microcontroller model's pipes may have different maximum packet sizes based on the pipe's + * index - refer to the chosen microcontroller's datasheet to determine the maximum bank size for each pipe. + * \n\n + * + * \note The default control pipe should not be manually configured by the user application, as it is + * automatically configured by the library internally. + * \n\n + * + * \note This routine will automatically select the specified pipe upon success. Upon failure, the pipe which + * failed to reconfigure correctly will be selected. + * + * \return Boolean \c true if the configuration succeeded, \c false otherwise. + */ + bool Pipe_ConfigurePipe(const uint8_t Address, + const uint8_t Type, + const uint8_t EndpointAddress, + const uint16_t Size, + const uint8_t Banks); + + /** Spin-loops until the currently selected non-control pipe is ready for the next packet of data to be read + * or written to it, aborting in the case of an error condition (such as a timeout or device disconnect). + * + * \ingroup Group_PipeRW_UC3 + * + * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t Pipe_WaitUntilReady(void); + + /** Determines if a pipe has been bound to the given device endpoint address. If a pipe which is bound to the given + * endpoint is found, it is automatically selected. + * + * \param[in] EndpointAddress Address and direction mask of the endpoint within the attached device to check. + * + * \return Boolean \c true if a pipe bound to the given endpoint address of the specified direction is found, + * \c false otherwise. + */ + bool Pipe_IsEndpointBound(const uint8_t EndpointAddress) ATTR_WARN_UNUSED_RESULT; + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #if !defined(ENDPOINT_CONTROLEP) + #define ENDPOINT_CONTROLEP 0 + #endif + + /* Inline Functions: */ + static inline uint8_t Pipe_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_BytesToEPSizeMask(const uint16_t Bytes) + { + uint8_t MaskVal = 0; + uint16_t CheckBytes = 8; + + while ((CheckBytes < Bytes) && (CheckBytes < PIPE_MAX_SIZE)) + { + MaskVal++; + CheckBytes <<= 1; + } + + return (MaskVal << AVR32_USBB_PSIZE_OFFSET); + } + + /* Function Prototypes: */ + void Pipe_ClearPipes(void); + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_R.c b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_R.c new file mode 100644 index 0000000000..f6c4beb229 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_R.c @@ -0,0 +1,84 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (void* const Buffer, + uint16_t Length) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + + if (!(Length)) + Endpoint_ClearOUT(); + + while (Length) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + else if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + + if (Endpoint_IsOUTReceived()) + { + while (Length && Endpoint_BytesInEndpoint()) + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + } + + Endpoint_ClearOUT(); + } + } + + while (!(Endpoint_IsINReady())) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + } + + return ENDPOINT_RWCSTREAM_NoError; +} + +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_TRANSFER_BYTE + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_W.c b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_W.c new file mode 100644 index 0000000000..922b58efa3 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_W.c @@ -0,0 +1,95 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (const void* const Buffer, + uint16_t Length) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + bool LastPacketFull = false; + + if (Length > USB_ControlRequest.wLength) + Length = USB_ControlRequest.wLength; + else if (!(Length)) + Endpoint_ClearIN(); + + while (Length || LastPacketFull) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + else if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + else if (Endpoint_IsOUTReceived()) + break; + + if (Endpoint_IsINReady()) + { + uint16_t BytesInEndpoint = Endpoint_BytesInEndpoint(); + + while (Length && (BytesInEndpoint < USB_Device_ControlEndpointSize)) + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + BytesInEndpoint++; + } + + LastPacketFull = (BytesInEndpoint == USB_Device_ControlEndpointSize); + Endpoint_ClearIN(); + } + } + + while (!(Endpoint_IsOUTReceived())) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + else if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + } + + return ENDPOINT_RWCSTREAM_NoError; +} + +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_TRANSFER_BYTE + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_RW.c b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_RW.c new file mode 100644 index 0000000000..e55e592eb2 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_RW.c @@ -0,0 +1,89 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + uint16_t BytesInTransfer = 0; + uint8_t ErrorCode; + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + { + Length -= *BytesProcessed; + TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed); + } + + while (Length) + { + if (!(Endpoint_IsReadWriteAllowed())) + { + TEMPLATE_CLEAR_ENDPOINT(); + + #if !defined(INTERRUPT_CONTROL_ENDPOINT) + USB_USBTask(); + #endif + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return ENDPOINT_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + } + else + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + BytesInTransfer++; + } + } + + return ENDPOINT_RWSTREAM_NoError; +} + +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_BUFFER_TYPE +#undef TEMPLATE_TRANSFER_BYTE +#undef TEMPLATE_CLEAR_ENDPOINT +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/Template/Template_Pipe_RW.c b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Template/Template_Pipe_RW.c new file mode 100644 index 0000000000..bb2a57fa52 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/Template/Template_Pipe_RW.c @@ -0,0 +1,88 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + uint16_t BytesInTransfer = 0; + uint8_t ErrorCode; + + Pipe_SetPipeToken(TEMPLATE_TOKEN); + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + { + Length -= *BytesProcessed; + TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed); + } + + while (Length) + { + if (!(Pipe_IsReadWriteAllowed())) + { + TEMPLATE_CLEAR_PIPE(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return PIPE_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + } + else + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + BytesInTransfer++; + } + } + + return PIPE_RWSTREAM_NoError; +} + +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_BUFFER_TYPE +#undef TEMPLATE_TOKEN +#undef TEMPLATE_TRANSFER_BYTE +#undef TEMPLATE_CLEAR_PIPE +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c b/lib/lufa/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c new file mode 100644 index 0000000000..2b1e9ac6b8 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c @@ -0,0 +1,222 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_UC3) + +#define __INCLUDE_FROM_USB_DRIVER +#define __INCLUDE_FROM_USB_CONTROLLER_C +#include "../USBController.h" + +#if defined(USB_CAN_BE_BOTH) +volatile uint8_t USB_CurrentMode = USB_MODE_None; +#endif + +#if !defined(USE_STATIC_OPTIONS) +volatile uint8_t USB_Options; +#endif + +void USB_Init( + #if defined(USB_CAN_BE_BOTH) + const uint8_t Mode + #endif + + #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) + , + #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS)) + void + #endif + + #if !defined(USE_STATIC_OPTIONS) + const uint8_t Options + #endif + ) +{ + #if !defined(USE_STATIC_OPTIONS) + USB_Options = Options; + #endif + + #if defined(USB_CAN_BE_BOTH) + if (Mode == USB_MODE_UID) + { + AVR32_USBB.USBCON.uide = true; + USB_INT_Enable(USB_INT_IDTI); + USB_CurrentMode = USB_GetUSBModeFromUID(); + } + else + { + AVR32_USBB.USBCON.uide = false; + USB_CurrentMode = Mode; + } + #else + AVR32_USBB.USBCON.uide = false; + #endif + + USB_IsInitialized = true; + + USB_ResetInterface(); +} + +void USB_Disable(void) +{ + USB_INT_DisableAllInterrupts(); + USB_INT_ClearAllInterrupts(); + + USB_Detach(); + USB_Controller_Disable(); + + USB_OTGPAD_Off(); + + #if defined(USB_CAN_BE_BOTH) + USB_CurrentMode = USB_MODE_None; + #endif + + AVR32_PM.GCCTRL[3].cen = false; + + USB_IsInitialized = false; +} + +void USB_ResetInterface(void) +{ + #if defined(USB_CAN_BE_BOTH) + bool UIDModeSelectEnabled = AVR32_USBB.USBCON.uide; + #endif + + AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].pllsel = !(USB_Options & USB_OPT_GCLK_SRC_OSC); + AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].oscsel = !(USB_Options & USB_OPT_GCLK_CHANNEL_0); + AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].diven = (F_USB != USB_CLOCK_REQUIRED_FREQ); + AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].div = (F_USB == USB_CLOCK_REQUIRED_FREQ) ? 0 : (uint32_t)((F_USB / USB_CLOCK_REQUIRED_FREQ / 2) - 1); + AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].cen = true; + + USB_INT_DisableAllInterrupts(); + USB_INT_ClearAllInterrupts(); + + USB_Controller_Reset(); + + #if defined(USB_CAN_BE_BOTH) + if (UIDModeSelectEnabled) + USB_INT_Enable(USB_INT_IDTI); + #endif + + USB_CLK_Unfreeze(); + + if (USB_CurrentMode == USB_MODE_Device) + { + #if defined(USB_CAN_BE_DEVICE) + AVR32_USBB.USBCON.uimod = true; + + USB_Init_Device(); + #endif + } + else if (USB_CurrentMode == USB_MODE_Host) + { + #if defined(INVERTED_VBUS_ENABLE_LINE) + AVR32_USBB.USBCON.vbuspo = true; + #endif + + #if defined(USB_CAN_BE_HOST) + AVR32_USBB.USBCON.uimod = false; + + USB_Init_Host(); + #endif + } + + USB_OTGPAD_On(); +} + +#if defined(USB_CAN_BE_DEVICE) +static void USB_Init_Device(void) +{ + USB_DeviceState = DEVICE_STATE_Unattached; + USB_Device_ConfigurationNumber = 0; + + #if !defined(NO_DEVICE_REMOTE_WAKEUP) + USB_Device_RemoteWakeupEnabled = false; + #endif + + #if !defined(NO_DEVICE_SELF_POWER) + USB_Device_CurrentlySelfPowered = false; + #endif + + #if !defined(FIXED_CONTROL_ENDPOINT_SIZE) + USB_Descriptor_Device_t* DeviceDescriptorPtr; + + if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR) + USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size; + #endif + + if (USB_Options & USB_DEVICE_OPT_LOWSPEED) + { + USB_Device_SetLowSpeed(); + } + else + { + #if defined(USB_DEVICE_OPT_HIGHSPEED) + if (USB_Options & USB_DEVICE_OPT_HIGHSPEED) + USB_Device_SetHighSpeed(); + else + USB_Device_SetFullSpeed(); + #else + USB_Device_SetFullSpeed(); + #endif + } + + USB_INT_Enable(USB_INT_VBUSTI); + + Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, + USB_Device_ControlEndpointSize, 1); + + USB_INT_Clear(USB_INT_SUSPI); + USB_INT_Enable(USB_INT_SUSPI); + USB_INT_Enable(USB_INT_EORSTI); + + USB_Attach(); +} +#endif + +#if defined(USB_CAN_BE_HOST) +static void USB_Init_Host(void) +{ + USB_HostState = HOST_STATE_Unattached; + USB_Host_ConfigurationNumber = 0; + USB_Host_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE; + + USB_Host_HostMode_On(); + + USB_Host_VBUS_Auto_On(); + + USB_INT_Enable(USB_INT_DCONNI); + USB_INT_Enable(USB_INT_BCERRI); + + USB_Attach(); +} +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h b/lib/lufa/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h new file mode 100644 index 0000000000..32c2f6ec17 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h @@ -0,0 +1,353 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Controller definitions for the AVR32 UC3 microcontrollers. + * \copydetails Group_USBManagement_UC3 + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USBManagement + * \defgroup Group_USBManagement_UC3 USB Interface Management (UC3) + * \brief USB Controller definitions for the AVR32 UC3 microcontrollers. + * + * Functions, macros, variables, enums and types related to the setup and management of the USB interface. + * + * @{ + */ + +#ifndef __USBCONTROLLER_UC3_H__ +#define __USBCONTROLLER_UC3_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBMode.h" + #include "../Events.h" + #include "../USBTask.h" + #include "../USBInterrupt.h" + + #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__) + #include "../Host.h" + #include "../OTG.h" + #include "../Pipe.h" + #include "../HostStandardReq.h" + #include "../PipeStream.h" + #endif + + #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) + #include "../Device.h" + #include "../Endpoint.h" + #include "../DeviceStandardReq.h" + #include "../EndpointStream.h" + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks and Defines: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + #if !defined(F_USB) + #error F_USB is not defined. You must define F_USB to the frequency of the clock input to the USB module. + #endif + + #if (defined(USB_SERIES_UC3A3_AVR) || defined(USB_SERIES_UC3A4_AVR)) + #if ((F_USB < 12000000) || (F_USB % 12000000)) + #error Invalid F_USB specified. F_USB must be a multiple of 12MHz for UC3A3 and UC3A4 devices. + #endif + #else + #if ((F_USB < 48000000) || (F_USB % 48000000)) + #error Invalid F_USB specified. F_USB must be a multiple of 48MHz for UC3A and UC3B devices. + #endif + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name USB Controller Option Masks */ + //@{ + /** Selects one of the system's main clock oscillators as the input clock to the USB Generic Clock source + * generation module. This indicates that an external oscillator should be used directly instead of an + * internal PLL clock source. + */ + #define USB_OPT_GCLK_SRC_OSC (1 << 2) + + /** Selects one of the system's PLL oscillators as the input clock to the USB Generic Clock source + * generation module. This indicates that one of the device's PLL outputs should be used instead of an + * external oscillator source. + */ + #define USB_OPT_GCLK_SRC_PLL (0 << 2) + + /** Selects PLL or External Oscillator 0 as the USB Generic Clock source module input clock. */ + #define USB_OPT_GCLK_CHANNEL_0 (1 << 3) + + /** Selects PLL or External Oscillator 1 as the USB Generic Clock source module input clock. */ + #define USB_OPT_GCLK_CHANNEL_1 (0 << 3) + //@} + + #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__) + /** Constant for the maximum software timeout period of the USB data stream transfer functions + * (both control and standard) when in either device or host mode. If the next packet of a stream + * is not received or acknowledged within this time period, the stream function will fail. + * + * This value may be overridden in the user project makefile as the value of the + * \ref USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch. + */ + #define USB_STREAM_TIMEOUT_MS 100 + #endif + + /* Inline Functions: */ + /** Determines if the VBUS line is currently high (i.e. the USB host is supplying power). + * + * \return Boolean \c true if the VBUS line is currently detecting power from a host, \c false otherwise. + */ + static inline bool USB_VBUS_GetStatus(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_VBUS_GetStatus(void) + { + return AVR32_USBB.USBSTA.vbus; + } + + /** Detaches the device from the USB bus. This has the effect of removing the device from any + * attached host, ceasing USB communications. If no host is present, this prevents any host from + * enumerating the device once attached until \ref USB_Attach() is called. + */ + static inline void USB_Detach(void) ATTR_ALWAYS_INLINE; + static inline void USB_Detach(void) + { + AVR32_USBB.UDCON.detach = true; + } + + /** Attaches the device to the USB bus. This announces the device's presence to any attached + * USB host, starting the enumeration process. If no host is present, attaching the device + * will allow for enumeration once a host is connected to the device. + * + * This is inexplicably also required for proper operation while in host mode, to enable the + * attachment of a device to the host. This is despite the bit being located in the device-mode + * register and despite the datasheet making no mention of its requirement in host mode. + */ + static inline void USB_Attach(void) ATTR_ALWAYS_INLINE; + static inline void USB_Attach(void) + { + AVR32_USBB.UDCON.detach = false; + } + + /* Function Prototypes: */ + /** Main function to initialize and start the USB interface. Once active, the USB interface will + * allow for device connection to a host when in device mode, or for device enumeration while in + * host mode. + * + * As the USB library relies on interrupts for the device and host mode enumeration processes, + * the user must enable global interrupts before or shortly after this function is called. In + * device mode, interrupts must be enabled within 500ms of this function being called to ensure + * that the host does not time out whilst enumerating the device. In host mode, interrupts may be + * enabled at the application's leisure however enumeration will not begin of an attached device + * until after this has occurred. + * + * Calling this function when the USB interface is already initialized will cause a complete USB + * interface reset and re-enumeration. + * + * \param[in] Mode Mask indicating what mode the USB interface is to be initialized to, a value + * from the \ref USB_Modes_t enum. + * \note This parameter does not exist on devices with only one supported USB + * mode (device or host). + * + * \param[in] Options Mask indicating the options which should be used when initializing the USB + * interface to control the USB interface's behavior. This should be comprised of + * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the + * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device + * mode speed. + * + * \note To reduce the FLASH requirements of the library if only device or host mode is required, + * the mode can be statically set in the project makefile by defining the token \c USB_DEVICE_ONLY + * (for device mode) or \c USB_HOST_ONLY (for host mode), passing the token to the compiler + * via the -D switch. If the mode is statically set, this parameter does not exist in the + * function prototype. + * \n\n + * + * \note To reduce the FLASH requirements of the library if only fixed settings are required, + * the options may be set statically in the same manner as the mode (see the Mode parameter of + * this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token, + * defined to the appropriate options masks. When the options are statically set, this + * parameter does not exist in the function prototype. + * + * \see \ref Group_Device for the \c USB_DEVICE_OPT_* masks. + */ + void USB_Init( + #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) + const uint8_t Mode + #endif + + #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) || defined(__DOXYGEN__) + , + #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS)) + void + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + const uint8_t Options + #endif + ); + + /** Shuts down the USB interface. This turns off the USB interface after deallocating all USB FIFO + * memory, endpoints and pipes. When turned off, no USB functionality can be used until the interface + * is restarted with the \ref USB_Init() function. + */ + void USB_Disable(void); + + /** Resets the interface, when already initialized. This will re-enumerate the device if already connected + * to a host, or re-enumerate an already attached device when in host mode. + */ + void USB_ResetInterface(void); + + /* Global Variables: */ + #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) + /** Indicates the mode that the USB interface is currently initialized to, a value from the + * \ref USB_Modes_t enum. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + * + * \note When the controller is initialized into UID auto-detection mode, this variable will hold the + * currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller + * is fixed into a specific mode (either through the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY compile time + * options, or a limitation of the USB controller in the chosen device model) this will evaluate to + * a constant of the appropriate value and will never evaluate to \ref USB_MODE_None even when the + * USB interface is not initialized. + */ + extern volatile uint8_t USB_CurrentMode; + #elif defined(USB_CAN_BE_HOST) + #define USB_CurrentMode USB_MODE_Host + #elif defined(USB_CAN_BE_DEVICE) + #define USB_CurrentMode USB_MODE_Device + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + /** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init() + * was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + extern volatile uint8_t USB_Options; + #elif defined(USE_STATIC_OPTIONS) + #define USB_Options USE_STATIC_OPTIONS + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) + #define USB_CLOCK_REQUIRED_FREQ 12000000UL + #else + #define USB_CLOCK_REQUIRED_FREQ 48000000UL + #endif + + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_USB_CONTROLLER_C) + #if defined(USB_CAN_BE_DEVICE) + static void USB_Init_Device(void); + #endif + + #if defined(USB_CAN_BE_HOST) + static void USB_Init_Host(void); + #endif + #endif + + /* Inline Functions: */ + static inline void USB_OTGPAD_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTGPAD_On(void) + { + AVR32_USBB.USBCON.otgpade = true; + } + + static inline void USB_OTGPAD_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTGPAD_Off(void) + { + AVR32_USBB.USBCON.otgpade = false; + } + + static inline void USB_CLK_Freeze(void) ATTR_ALWAYS_INLINE; + static inline void USB_CLK_Freeze(void) + { + AVR32_USBB.USBCON.frzclk = true; + } + + static inline void USB_CLK_Unfreeze(void) ATTR_ALWAYS_INLINE; + static inline void USB_CLK_Unfreeze(void) + { + AVR32_USBB.USBCON.frzclk = false; + } + + static inline void USB_Controller_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Enable(void) + { + AVR32_USBB.USBCON.usbe = true; + } + + static inline void USB_Controller_Disable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Disable(void) + { + AVR32_USBB.USBCON.usbe = false; + } + + static inline void USB_Controller_Reset(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Reset(void) + { + AVR32_USBB.USBCON.usbe = false; + AVR32_USBB.USBCON.usbe = true; + } + + #if defined(USB_CAN_BE_BOTH) + static inline uint8_t USB_GetUSBModeFromUID(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t USB_GetUSBModeFromUID(void) + { + if (AVR32_USBB.USBSTA.id) + return USB_MODE_Device; + else + return USB_MODE_Host; + } + #endif + + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c b/lib/lufa/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c new file mode 100644 index 0000000000..3b3958a145 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c @@ -0,0 +1,228 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_UC3) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBInterrupt.h" + +void USB_INT_DisableAllInterrupts(void) +{ + AVR32_USBB.USBCON.vbuste = false; + AVR32_USBB.USBCON.idte = false; + + AVR32_USBB.uhinteclr = -1; + AVR32_USBB.udinteclr = -1; +} + +void USB_INT_ClearAllInterrupts(void) +{ + AVR32_USBB.USBSTACLR.vbustic = true; + AVR32_USBB.USBSTACLR.idtic = true; + + AVR32_USBB.uhintclr = -1; + AVR32_USBB.udintclr = -1; +} + +ISR(USB_GEN_vect) +{ + #if defined(USB_CAN_BE_DEVICE) + #if !defined(NO_SOF_EVENTS) + if (USB_INT_HasOccurred(USB_INT_SOFI) && USB_INT_IsEnabled(USB_INT_SOFI)) + { + USB_INT_Clear(USB_INT_SOFI); + + EVENT_USB_Device_StartOfFrame(); + } + #endif + + if (USB_INT_HasOccurred(USB_INT_VBUSTI) && USB_INT_IsEnabled(USB_INT_VBUSTI)) + { + USB_INT_Clear(USB_INT_VBUSTI); + + if (USB_VBUS_GetStatus()) + { + USB_DeviceState = DEVICE_STATE_Powered; + EVENT_USB_Device_Connect(); + } + else + { + USB_DeviceState = DEVICE_STATE_Unattached; + EVENT_USB_Device_Disconnect(); + } + } + + if (USB_INT_HasOccurred(USB_INT_SUSPI) && USB_INT_IsEnabled(USB_INT_SUSPI)) + { + USB_INT_Disable(USB_INT_SUSPI); + USB_INT_Enable(USB_INT_WAKEUPI); + + USB_CLK_Freeze(); + + USB_DeviceState = DEVICE_STATE_Suspended; + EVENT_USB_Device_Suspend(); + } + + if (USB_INT_HasOccurred(USB_INT_WAKEUPI) && USB_INT_IsEnabled(USB_INT_WAKEUPI)) + { + USB_CLK_Unfreeze(); + + USB_INT_Clear(USB_INT_WAKEUPI); + + USB_INT_Disable(USB_INT_WAKEUPI); + USB_INT_Enable(USB_INT_SUSPI); + + if (USB_Device_ConfigurationNumber) + USB_DeviceState = DEVICE_STATE_Configured; + else + USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Addressed : DEVICE_STATE_Powered; + + EVENT_USB_Device_WakeUp(); + } + + if (USB_INT_HasOccurred(USB_INT_EORSTI) && USB_INT_IsEnabled(USB_INT_EORSTI)) + { + USB_INT_Clear(USB_INT_EORSTI); + + USB_DeviceState = DEVICE_STATE_Default; + USB_Device_ConfigurationNumber = 0; + + USB_INT_Clear(USB_INT_SUSPI); + USB_INT_Disable(USB_INT_SUSPI); + USB_INT_Enable(USB_INT_WAKEUPI); + + USB_Device_SetDeviceAddress(0); + Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, + USB_Device_ControlEndpointSize, 1); + + #if defined(INTERRUPT_CONTROL_ENDPOINT) + USB_INT_Enable(USB_INT_RXSTPI); + #endif + + EVENT_USB_Device_Reset(); + } + #endif + + #if defined(USB_CAN_BE_HOST) + #if !defined(NO_SOF_EVENTS) + if (USB_INT_HasOccurred(USB_INT_HSOFI) && USB_INT_IsEnabled(USB_INT_HSOFI)) + { + USB_INT_Clear(USB_INT_HSOFI); + + EVENT_USB_Host_StartOfFrame(); + } + #endif + + if (USB_INT_HasOccurred(USB_INT_DDISCI) && USB_INT_IsEnabled(USB_INT_DDISCI)) + { + USB_INT_Clear(USB_INT_DDISCI); + USB_INT_Clear(USB_INT_DCONNI); + USB_INT_Disable(USB_INT_DDISCI); + + EVENT_USB_Host_DeviceUnattached(); + + USB_ResetInterface(); + } + + if (USB_INT_HasOccurred(USB_INT_VBERRI) && USB_INT_IsEnabled(USB_INT_VBERRI)) + { + USB_INT_Clear(USB_INT_VBERRI); + + USB_Host_VBUS_Manual_Off(); + USB_Host_VBUS_Auto_Off(); + + EVENT_USB_Host_HostError(HOST_ERROR_VBusVoltageDip); + EVENT_USB_Host_DeviceUnattached(); + + USB_HostState = HOST_STATE_Unattached; + } + + if (USB_INT_HasOccurred(USB_INT_DCONNI) && USB_INT_IsEnabled(USB_INT_DCONNI)) + { + USB_INT_Clear(USB_INT_DCONNI); + USB_INT_Disable(USB_INT_DCONNI); + + EVENT_USB_Host_DeviceAttached(); + + USB_INT_Enable(USB_INT_DDISCI); + + USB_HostState = HOST_STATE_Powered; + } + + if (USB_INT_HasOccurred(USB_INT_BCERRI) && USB_INT_IsEnabled(USB_INT_BCERRI)) + { + USB_INT_Clear(USB_INT_BCERRI); + + EVENT_USB_Host_DeviceEnumerationFailed(HOST_ENUMERROR_NoDeviceDetected, 0); + EVENT_USB_Host_DeviceUnattached(); + + USB_ResetInterface(); + } + #endif + + #if defined(USB_CAN_BE_BOTH) + if (USB_INT_HasOccurred(USB_INT_IDTI) && USB_INT_IsEnabled(USB_INT_IDTI)) + { + USB_INT_Clear(USB_INT_IDTI); + + if (USB_DeviceState != DEVICE_STATE_Unattached) + EVENT_USB_Device_Disconnect(); + + if (USB_HostState != HOST_STATE_Unattached) + EVENT_USB_Host_DeviceUnattached(); + + USB_CurrentMode = USB_GetUSBModeFromUID(); + USB_ResetInterface(); + + EVENT_USB_UIDChange(); + } + #endif +} + +#if defined(INTERRUPT_CONTROL_ENDPOINT) && defined(USB_CAN_BE_DEVICE) +ISR(USB_COM_vect) +{ + uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint(); + + Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP); + USB_INT_Disable(USB_INT_RXSTPI); + + GlobalInterruptEnable(); + + USB_Device_ProcessControlRequest(); + + Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP); + USB_INT_Enable(USB_INT_RXSTPI); + Endpoint_SelectEndpoint(PrevSelectedEndpoint); +} +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.h b/lib/lufa/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.h new file mode 100644 index 0000000000..e2f67bf86a --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.h @@ -0,0 +1,376 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Controller Interrupt definitions for the AVR32 UC3 microcontrollers. + * + * This file contains definitions required for the correct handling of low level USB service routine interrupts + * from the USB controller. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +#ifndef __USBINTERRUPT_UC3_H__ +#define __USBINTERRUPT_UC3_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* External Variables: */ + extern volatile uint32_t USB_Endpoint_SelectedEndpoint; + + /* Enums: */ + enum USB_Interrupts_t + { + USB_INT_VBUSTI = 0, + #if (defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)) + USB_INT_IDTI = 1, + #endif + #if (defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)) + USB_INT_WAKEUPI = 2, + USB_INT_SUSPI = 3, + USB_INT_EORSTI = 4, + USB_INT_SOFI = 5, + USB_INT_RXSTPI = 6, + #endif + #if (defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)) + USB_INT_HSOFI = 7, + USB_INT_DCONNI = 8, + USB_INT_DDISCI = 9, + USB_INT_RSTI = 10, + USB_INT_BCERRI = 11, + USB_INT_VBERRI = 12, + #endif + }; + + /* Inline Functions: */ + static inline void USB_INT_Enable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE; + static inline void USB_INT_Enable(const uint8_t Interrupt) + { + switch (Interrupt) + { + case USB_INT_VBUSTI: + AVR32_USBB.USBCON.vbuste = true; + break; + #if defined(USB_CAN_BE_BOTH) + case USB_INT_IDTI: + AVR32_USBB.USBCON.idte = true; + break; + #endif + #if defined(USB_CAN_BE_DEVICE) + case USB_INT_WAKEUPI: + AVR32_USBB.UDINTESET.wakeupes = true; + break; + case USB_INT_SUSPI: + AVR32_USBB.UDINTESET.suspes = true; + break; + case USB_INT_EORSTI: + AVR32_USBB.UDINTESET.eorstes = true; + break; + case USB_INT_SOFI: + AVR32_USBB.UDINTESET.sofes = true; + break; + case USB_INT_RXSTPI: + (&AVR32_USBB.UECON0SET)[USB_Endpoint_SelectedEndpoint].rxstpes = true; + break; + #endif + #if defined(USB_CAN_BE_HOST) + case USB_INT_HSOFI: + AVR32_USBB.UHINTESET.hsofies = true; + break; + case USB_INT_DCONNI: + AVR32_USBB.UHINTESET.dconnies = true; + break; + case USB_INT_DDISCI: + AVR32_USBB.UHINTESET.ddiscies = true; + break; + case USB_INT_RSTI: + AVR32_USBB.UHINTESET.rsties = true; + break; + case USB_INT_BCERRI: + AVR32_USBB.USBCON.bcerre = true; + break; + case USB_INT_VBERRI: + AVR32_USBB.USBCON.vberre = true; + break; + #endif + default: + break; + } + } + + static inline void USB_INT_Disable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE; + static inline void USB_INT_Disable(const uint8_t Interrupt) + { + switch (Interrupt) + { + case USB_INT_VBUSTI: + AVR32_USBB.USBCON.vbuste = false; + break; + #if defined(USB_CAN_BE_BOTH) + case USB_INT_IDTI: + AVR32_USBB.USBCON.idte = false; + break; + #endif + #if defined(USB_CAN_BE_DEVICE) + case USB_INT_WAKEUPI: + AVR32_USBB.UDINTECLR.wakeupec = true; + break; + case USB_INT_SUSPI: + AVR32_USBB.UDINTECLR.suspec = true; + break; + case USB_INT_EORSTI: + AVR32_USBB.UDINTECLR.eorstec = true; + break; + case USB_INT_SOFI: + AVR32_USBB.UDINTECLR.sofec = true; + break; + case USB_INT_RXSTPI: + (&AVR32_USBB.UECON0CLR)[USB_Endpoint_SelectedEndpoint].rxstpec = true; + break; + #endif + #if defined(USB_CAN_BE_HOST) + case USB_INT_HSOFI: + AVR32_USBB.UHINTECLR.hsofiec = true; + break; + case USB_INT_DCONNI: + AVR32_USBB.UHINTECLR.dconniec = true; + break; + case USB_INT_DDISCI: + AVR32_USBB.UHINTECLR.ddisciec = true; + break; + case USB_INT_RSTI: + AVR32_USBB.UHINTECLR.rstiec = true; + break; + case USB_INT_BCERRI: + AVR32_USBB.USBCON.bcerre = false; + break; + case USB_INT_VBERRI: + AVR32_USBB.USBCON.vberre = false; + break; + #endif + default: + break; + } + } + + static inline void USB_INT_Clear(const uint8_t Interrupt) ATTR_ALWAYS_INLINE; + static inline void USB_INT_Clear(const uint8_t Interrupt) + { + switch (Interrupt) + { + case USB_INT_VBUSTI: + AVR32_USBB.USBSTACLR.vbustic = true; + (void)AVR32_USBB.USBSTACLR; + break; + #if defined(USB_CAN_BE_BOTH) + case USB_INT_IDTI: + AVR32_USBB.USBSTACLR.idtic = true; + (void)AVR32_USBB.USBSTACLR; + break; + #endif + #if defined(USB_CAN_BE_DEVICE) + case USB_INT_WAKEUPI: + AVR32_USBB.UDINTCLR.wakeupc = true; + (void)AVR32_USBB.UDINTCLR; + break; + case USB_INT_SUSPI: + AVR32_USBB.UDINTCLR.suspc = true; + (void)AVR32_USBB.UDINTCLR; + break; + case USB_INT_EORSTI: + AVR32_USBB.UDINTCLR.eorstc = true; + (void)AVR32_USBB.UDINTCLR; + break; + case USB_INT_SOFI: + AVR32_USBB.UDINTCLR.sofc = true; + (void)AVR32_USBB.UDINTCLR; + break; + case USB_INT_RXSTPI: + (&AVR32_USBB.UESTA0CLR)[USB_Endpoint_SelectedEndpoint].rxstpic = true; + break; + #endif + #if defined(USB_CAN_BE_HOST) + case USB_INT_HSOFI: + AVR32_USBB.UHINTCLR.hsofic = true; + (void)AVR32_USBB.UHINTCLR; + break; + case USB_INT_DCONNI: + AVR32_USBB.UHINTCLR.dconnic = true; + (void)AVR32_USBB.UHINTCLR; + break; + case USB_INT_DDISCI: + AVR32_USBB.UHINTCLR.ddiscic = true; + (void)AVR32_USBB.UHINTCLR; + break; + case USB_INT_RSTI: + AVR32_USBB.UHINTCLR.rstic = true; + (void)AVR32_USBB.UHINTCLR; + break; + case USB_INT_BCERRI: + AVR32_USBB.USBSTACLR.bcerric = true; + (void)AVR32_USBB.USBSTACLR; + break; + case USB_INT_VBERRI: + AVR32_USBB.USBSTACLR.vberric = true; + (void)AVR32_USBB.USBSTACLR; + break; + #endif + default: + break; + } + } + + static inline bool USB_INT_IsEnabled(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline bool USB_INT_IsEnabled(const uint8_t Interrupt) + { + switch (Interrupt) + { + case USB_INT_VBUSTI: + return AVR32_USBB.USBCON.vbuste; + #if defined(USB_CAN_BE_BOTH) + case USB_INT_IDTI: + return AVR32_USBB.USBCON.idte; + #endif + #if defined(USB_CAN_BE_DEVICE) + case USB_INT_WAKEUPI: + return AVR32_USBB.UDINTE.wakeupe; + case USB_INT_SUSPI: + return AVR32_USBB.UDINTE.suspe; + case USB_INT_EORSTI: + return AVR32_USBB.UDINTE.eorste; + case USB_INT_SOFI: + return AVR32_USBB.UDINTE.sofe; + case USB_INT_RXSTPI: + return (&AVR32_USBB.UECON0)[USB_Endpoint_SelectedEndpoint].rxstpe; + #endif + #if defined(USB_CAN_BE_HOST) + case USB_INT_HSOFI: + return AVR32_USBB.UHINTE.hsofie; + case USB_INT_DCONNI: + return AVR32_USBB.UHINTE.dconnie; + case USB_INT_DDISCI: + return AVR32_USBB.UHINTE.ddiscie; + case USB_INT_RSTI: + return AVR32_USBB.UHINTE.rstie; + case USB_INT_BCERRI: + return AVR32_USBB.USBCON.bcerre; + case USB_INT_VBERRI: + return AVR32_USBB.USBCON.vberre; + #endif + default: + return false; + } + } + + static inline bool USB_INT_HasOccurred(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline bool USB_INT_HasOccurred(const uint8_t Interrupt) + { + switch (Interrupt) + { + case USB_INT_VBUSTI: + return AVR32_USBB.USBSTA.vbusti; + #if defined(USB_CAN_BE_BOTH) + case USB_INT_IDTI: + return AVR32_USBB.USBSTA.idti; + #endif + #if defined(USB_CAN_BE_DEVICE) + case USB_INT_WAKEUPI: + return AVR32_USBB.UDINT.wakeup; + case USB_INT_SUSPI: + return AVR32_USBB.UDINT.susp; + case USB_INT_EORSTI: + return AVR32_USBB.UDINT.eorst; + case USB_INT_SOFI: + return AVR32_USBB.UDINT.sof; + case USB_INT_RXSTPI: + return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].rxstpi; + #endif + #if defined(USB_CAN_BE_HOST) + case USB_INT_HSOFI: + return AVR32_USBB.UHINT.hsofi; + case USB_INT_DCONNI: + return AVR32_USBB.UHINT.dconni; + case USB_INT_DDISCI: + return AVR32_USBB.UHINT.ddisci; + case USB_INT_RSTI: + return AVR32_USBB.UHINT.rsti; + case USB_INT_BCERRI: + return AVR32_USBB.USBSTA.bcerri; + case USB_INT_VBERRI: + return AVR32_USBB.USBSTA.vberri; + #endif + default: + return false; + } + } + + /* Includes: */ + #include "../USBMode.h" + #include "../Events.h" + #include "../USBController.h" + + /* Function Prototypes: */ + void USB_INT_ClearAllInterrupts(void); + void USB_INT_DisableAllInterrupts(void); + #endif + + /* Public Interface - May be used in end-application: */ + /* Function Prototypes: */ + #if defined(__DOXYGEN__) + /** Interrupt service routine handler for the USB controller ISR group. This interrupt routine <b>must</b> be + * linked to the entire USB controller ISR vector group inside the AVR32's interrupt controller peripheral, + * using the user application's preferred USB controller driver. + */ + void USB_GEN_vect(void); + #else + ISR(USB_GEN_vect); + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/USBController.h b/lib/lufa/LUFA/Drivers/USB/Core/USBController.h new file mode 100644 index 0000000000..5980a37ce6 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/USBController.h @@ -0,0 +1,165 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Common USB Controller definitions for all architectures. + * \copydetails Group_USBManagement + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_USBManagement USB Interface Management + * \brief USB Controller definitions for general USB controller management. + * + * Functions, macros, variables, enums and types related to the setup and management of the USB interface. + * + * @{ + */ + +#ifndef __USBCONTROLLER_H__ +#define __USBCONTROLLER_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks and Defines: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Defines: */ + /** \name Endpoint Direction Masks */ + //@{ + /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's + * direction for comparing with the \c ENDPOINT_DIR_* masks. + */ + #define ENDPOINT_DIR_MASK 0x80 + + /** Endpoint address direction mask for an OUT direction (Host to Device) endpoint. This may be ORed with + * the index of the address within a device to obtain the full endpoint address. + */ + #define ENDPOINT_DIR_OUT 0x00 + + /** Endpoint address direction mask for an IN direction (Device to Host) endpoint. This may be ORed with + * the index of the address within a device to obtain the full endpoint address. + */ + #define ENDPOINT_DIR_IN 0x80 + //@} + + /** \name Pipe Direction Masks */ + //@{ + /** Pipe direction mask, for masking against pipe addresses to retrieve the pipe's + * direction for comparing with the \c PIPE_DIR_* masks. + */ + #define PIPE_DIR_MASK 0x80 + + /** Endpoint address direction mask for an OUT direction (Host to Device) endpoint. This may be ORed with + * the index of the address within a device to obtain the full endpoint address. + */ + #define PIPE_DIR_OUT 0x00 + + /** Endpoint address direction mask for an IN direction (Device to Host) endpoint. This may be ORed with + * the index of the address within a device to obtain the full endpoint address. + */ + #define PIPE_DIR_IN 0x80 + //@} + + /** \name Endpoint/Pipe Type Masks */ + //@{ + /** Mask for determining the type of an endpoint from an endpoint descriptor. This should then be compared + * with the \c EP_TYPE_* masks to determine the exact type of the endpoint. + */ + #define EP_TYPE_MASK 0x03 + + /** Mask for a CONTROL type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_CONTROL 0x00 + + /** Mask for an ISOCHRONOUS type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_ISOCHRONOUS 0x01 + + /** Mask for a BULK type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_BULK 0x02 + + /** Mask for an INTERRUPT type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_INTERRUPT 0x03 + //@} + + /* Enums: */ + /** Enum for the possible USB controller modes, for initialization via \ref USB_Init() and indication back to the + * user application via \ref USB_CurrentMode. + */ + enum USB_Modes_t + { + USB_MODE_None = 0, /**< Indicates that the controller is currently not initialized in any specific USB mode. */ + USB_MODE_Device = 1, /**< Indicates that the controller is currently initialized in USB Device mode. */ + USB_MODE_Host = 2, /**< Indicates that the controller is currently initialized in USB Host mode. */ + USB_MODE_UID = 3, /**< Indicates that the controller should determine the USB mode from the UID pin of the + * USB connector. + */ + }; + + /* Architecture Includes: */ + #if (ARCH == ARCH_AVR8) + #include "AVR8/USBController_AVR8.h" + #elif (ARCH == ARCH_UC3) + #include "UC3/USBController_UC3.h" + #elif (ARCH == ARCH_XMEGA) + #include "XMEGA/USBController_XMEGA.h" + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/USBInterrupt.h b/lib/lufa/LUFA/Drivers/USB/Core/USBInterrupt.h new file mode 100644 index 0000000000..b00ef7bd39 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/USBInterrupt.h @@ -0,0 +1,73 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB controller interrupt service routine management. + * + * This file contains definitions required for the correct handling of low level USB service routine interrupts + * from the USB controller. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +#ifndef __USBINTERRUPT_H__ +#define __USBINTERRUPT_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Architecture Includes: */ + #if (ARCH == ARCH_AVR8) + #include "AVR8/USBInterrupt_AVR8.h" + #elif (ARCH == ARCH_UC3) + #include "UC3/USBInterrupt_UC3.h" + #elif (ARCH == ARCH_XMEGA) + #include "XMEGA/USBInterrupt_XMEGA.h" + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/USBMode.h b/lib/lufa/LUFA/Drivers/USB/Core/USBMode.h new file mode 100644 index 0000000000..2044f899a9 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/USBMode.h @@ -0,0 +1,283 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB mode and feature support definitions. + * \copydetails Group_USBMode + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_USBMode USB Mode Tokens + * \brief USB mode and feature support definitions. + * + * This file defines macros indicating the type of USB controller the library is being compiled for, and its + * capabilities. These macros may then be referenced in the user application to selectively enable or disable + * code sections depending on if they are defined or not. + * + * After the inclusion of the master USB driver header, one or more of the following tokens may be defined, to + * allow the user code to conditionally enable or disable code based on the USB controller family and allowable + * USB modes. These tokens may be tested against to eliminate code relating to a USB mode which is not enabled for + * the given compilation. + * + * @{ + */ + +#ifndef __USBMODE_H__ +#define __USBMODE_H__ + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Includes: */ + #include "../../../Common/Common.h" + + /* Public Interface - May be used in end-application: */ + #if defined(__DOXYGEN__) + /** Indicates that the target AVR microcontroller belongs to the Series 2 AVR8 USB controller + * (i.e. AT90USBxxx2 or ATMEGAxxU2) when defined. + */ + #define USB_SERIES_2_AVR + + /** Indicates that the target AVR microcontroller belongs to the Series 4 AVR8 USB controller + * (i.e. ATMEGAxxU4) when defined. + */ + #define USB_SERIES_4_AVR + + /** Indicates that the target AVR microcontroller belongs to the Series 6 AVR8 USB controller + * (i.e. AT90USBxxx6) when defined. + */ + #define USB_SERIES_6_AVR + + /** Indicates that the target AVR microcontroller belongs to the Series 7 AVR8 USB controller + * (i.e. AT90USBxxx7) when defined. + */ + #define USB_SERIES_7_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A0 Series USB controller + * (i.e. AT32UC3A0*) when defined. + */ + #define USB_SERIES_UC3A0_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A1 Series USB controller + * (i.e. AT32UC3A1*) when defined. + */ + #define USB_SERIES_UC3A1_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A3 Series USB controller + * (i.e. AT32UC3A3*) when defined. + */ + #define USB_SERIES_UC3A3_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A4 Series USB controller + * (i.e. AT32UC3A4*) when defined. + */ + #define USB_SERIES_UC3A4_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B0 Series USB controller + * (i.e. AT32UC3B0*) when defined. + */ + #define USB_SERIES_UC3B0_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B1 Series USB controller + * (i.e. AT32UC3B1*) when defined. + */ + #define USB_SERIES_UC3B1_AVR + + /** Indicates that the target AVR microcontroller belongs to the XMEGA A1U Series USB controller + * (i.e. ATXMEGA*A1U) when defined. + */ + #define USB_SERIES_A1U_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA A3U Series USB controller + * (i.e. ATXMEGA*A3U) when defined. + */ + #define USB_SERIES_A3U_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA A4U Series USB controller + * (i.e. ATXMEGA*A4U) when defined. + */ + #define USB_SERIES_A4U_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA B1 Series USB controller + * (i.e. ATXMEGA*B1) when defined. + */ + #define USB_SERIES_B1_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA B3 Series USB controller + * (i.e. ATXMEGA*B3) when defined. + */ + #define USB_SERIES_B3_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA C3 Series USB controller + * (i.e. ATXMEGA*C3) when defined. + */ + #define USB_SERIES_C3_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA C4 Series USB controller + * (i.e. ATXMEGA*C4) when defined. + */ + #define USB_SERIES_C4_XMEGA + + /** Indicates that the target microcontroller and compilation settings allow for the + * target to be configured in USB Device mode when defined. + */ + #define USB_CAN_BE_DEVICE + + /** Indicates that the target microcontroller and compilation settings allow for the + * target to be configured in USB Host mode when defined. + */ + #define USB_CAN_BE_HOST + + /** Indicates that the target microcontroller and compilation settings allow for the + * target to be configured in either USB Device or Host mode when defined. + */ + #define USB_CAN_BE_BOTH + #else + /* Macros: */ + #if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__) || \ + defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__)) + #define USB_SERIES_2_AVR + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__)) + #define USB_SERIES_4_AVR + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)) + #define USB_SERIES_6_AVR + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__)) + #define USB_SERIES_7_AVR + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3A0512__) || defined(__AVR32_UC3A0256__) || \ + defined(__AVR32_UC3A0128__) || defined(__AVR32_UC3A064__)) + #define USB_SERIES_UC3A0_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3A1512__) || defined(__AVR32_UC3A1256__) || \ + defined(__AVR32_UC3A1128__) || defined(__AVR32_UC3A164__)) + #define USB_SERIES_UC3A1_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3A3256__) || defined(__AVR32_UC3A3256S__) || \ + defined(__AVR32_UC3A3128__) || defined(__AVR32_UC3A3128S__) || \ + defined(__AVR32_UC3A364__) || defined(__AVR32_UC3A364S__)) + #define USB_SERIES_UC3A3_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3A4256__) || defined(__AVR32_UC3A4256S__) || \ + defined(__AVR32_UC3A4128__) || defined(__AVR32_UC3A4128S__) || \ + defined(__AVR32_UC3A464__) || defined(__AVR32_UC3A464S__)) + #define USB_SERIES_UC3A4_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3B0512__) || defined(__AVR32_UC3B0256__) || \ + defined(__AVR32_UC3B0128__) || defined(__AVR32_UC3B064__)) + #define USB_SERIES_UC3B0_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3B1512__) || defined(__AVR32_UC3B1256__) || \ + defined(__AVR32_UC3B1128__) || defined(__AVR32_UC3B164__)) + #define USB_SERIES_UC3B1_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR_ATxmega128A1U__) || defined(__AVR_ATxmega64A1U__)) + #define USB_SERIES_A1U_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega64A3U__) || defined(__AVR_ATxmega128A3U__) || \ + defined(__AVR_ATxmega192A3U__) || defined(__AVR_ATxmega256A3U__)) + #define USB_SERIES_A3U_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega256A3BU__)) + #define USB_SERIES_A3BU_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega16A4U__) || defined(__AVR_ATxmega32A4U__) || \ + defined(__AVR_ATxmega64A4U__) || defined(__AVR_ATxmega128A4U__)) + #define USB_SERIES_A4U_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega128B1__) || defined(__AVR_ATxmega64B1__)) + #define USB_SERIES_B1_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega128B3__) || defined(__AVR_ATxmega64B3__)) + #define USB_SERIES_B3_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega128C3__) || defined(__AVR_ATxmega64C3__) || \ + defined(__AVR_ATxmega192C3__) || defined(__AVR_ATxmega256C3__) || \ + defined(__AVR_ATxmega384C3__)) + #define USB_SERIES_C3_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega16C4__) || defined(__AVR_ATxmega32C4__)) + #define USB_SERIES_C4_XMEGA + #define USB_CAN_BE_DEVICE + #endif + + #if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY)) + #error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive. + #elif defined(USB_HOST_ONLY) + #if !defined(USB_CAN_BE_HOST) + #error USB_HOST_ONLY is not available for the currently selected microcontroller model. + #else + #undef USB_CAN_BE_DEVICE + #endif + #elif defined(USB_DEVICE_ONLY) + #if !defined(USB_CAN_BE_DEVICE) + #error USB_DEVICE_ONLY is not available for the currently selected microcontroller model. + #else + #undef USB_CAN_BE_HOST + #endif + #endif + + #if (defined(USB_CAN_BE_DEVICE) && defined(USB_CAN_BE_HOST)) + #define USB_CAN_BE_BOTH + #endif + + #if (!defined(USB_CAN_BE_DEVICE) && !defined(USB_CAN_BE_HOST)) + #error The currently selected device, USB mode or architecture is not supported. + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/USBTask.c b/lib/lufa/LUFA/Drivers/USB/Core/USBTask.c new file mode 100644 index 0000000000..329ff4a272 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/USBTask.c @@ -0,0 +1,89 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USBTASK_C +#define __INCLUDE_FROM_USB_DRIVER +#include "USBTask.h" + +volatile bool USB_IsInitialized; +USB_Request_Header_t USB_ControlRequest; + +#if defined(USB_CAN_BE_HOST) && !defined(HOST_STATE_AS_GPIOR) +volatile uint8_t USB_HostState; +#endif + +#if defined(USB_CAN_BE_DEVICE) && !defined(DEVICE_STATE_AS_GPIOR) +volatile uint8_t USB_DeviceState; +#endif + +void USB_USBTask(void) +{ + #if defined(USB_CAN_BE_BOTH) + if (USB_CurrentMode == USB_MODE_Device) + USB_DeviceTask(); + else if (USB_CurrentMode == USB_MODE_Host) + USB_HostTask(); + #elif defined(USB_CAN_BE_HOST) + USB_HostTask(); + #elif defined(USB_CAN_BE_DEVICE) + USB_DeviceTask(); + #endif +} + +#if defined(USB_CAN_BE_DEVICE) +static void USB_DeviceTask(void) +{ + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + + uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint(); + + Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP); + + if (Endpoint_IsSETUPReceived()) + USB_Device_ProcessControlRequest(); + + Endpoint_SelectEndpoint(PrevEndpoint); +} +#endif + +#if defined(USB_CAN_BE_HOST) +static void USB_HostTask(void) +{ + uint8_t PrevPipe = Pipe_GetCurrentPipe(); + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + USB_Host_ProcessNextHostState(); + + Pipe_SelectPipe(PrevPipe); +} +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/USBTask.h b/lib/lufa/LUFA/Drivers/USB/Core/USBTask.h new file mode 100644 index 0000000000..77cee65815 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/USBTask.h @@ -0,0 +1,200 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Main USB service task management. + * + * This file contains the function definitions required for the main USB service task, which must be called + * from the user application to ensure that the USB connection to or from a connected USB device is maintained. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +#ifndef __USBTASK_H__ +#define __USBTASK_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + #include "USBController.h" + #include "Events.h" + #include "StdRequestType.h" + #include "StdDescriptors.h" + + #if defined(USB_CAN_BE_DEVICE) + #include "DeviceStandardReq.h" + #endif + + #if defined(USB_CAN_BE_HOST) + #include "HostStandardReq.h" + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Global Variables: */ + /** Indicates if the USB interface is currently initialized but not necessarily connected to a host + * or device (i.e. if \ref USB_Init() has been run). If this is false, all other library globals related + * to the USB driver are invalid. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + * + * \ingroup Group_USBManagement + */ + extern volatile bool USB_IsInitialized; + + /** Structure containing the last received Control request when in Device mode (for use in user-applications + * inside of the \ref EVENT_USB_Device_ControlRequest() event, or for filling up with a control request to + * issue when in Host mode before calling \ref USB_Host_SendControlRequest(). + * + * \note The contents of this structure is automatically endian-corrected for the current CPU architecture. + * + * \ingroup Group_USBManagement + */ + extern USB_Request_Header_t USB_ControlRequest; + + #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__) + #if !defined(HOST_STATE_AS_GPIOR) || defined(__DOXYGEN__) + /** Indicates the current host state machine state. When in host mode, this indicates the state + * via one of the values of the \ref USB_Host_States_t enum values. + * + * This value should not be altered by the user application as it is handled automatically by the + * library. + * + * To reduce program size and speed up checks of this global on the AVR8 architecture, it can be + * placed into one of the AVR's \c GPIOR hardware registers instead of RAM by defining the + * \c HOST_STATE_AS_GPIOR token to a value between 0 and 2 in the project makefile and passing it to + * the compiler via the -D switch. When defined, the corresponding GPIOR register should not be used + * in the user application except implicitly via the library APIs. + * + * \note This global is only present if the user application can be a USB host. + * + * \see \ref USB_Host_States_t for a list of possible device states. + * + * \ingroup Group_Host + */ + extern volatile uint8_t USB_HostState; + #else + #define USB_HostState CONCAT_EXPANDED(GPIOR, HOST_STATE_AS_GPIOR) + #endif + #endif + + #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) + #if !defined(DEVICE_STATE_AS_GPIOR) || defined(__DOXYGEN__) + /** Indicates the current device state machine state. When in device mode, this indicates the state + * via one of the values of the \ref USB_Device_States_t enum values. + * + * This value should not be altered by the user application as it is handled automatically by the + * library. The only exception to this rule is if the NO_LIMITED_CONTROLLER_CONNECT token is used + * (see \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events). + * + * To reduce program size and speed up checks of this global on the AVR8 architecture, it can be + * placed into one of the AVR's \c GPIOR hardware registers instead of RAM by defining the + * \c DEVICE_STATE_AS_GPIOR token to a value between 0 and 2 in the project makefile and passing it to + * the compiler via the -D switch. When defined, the corresponding GPIOR register should not be used + * in the user application except implicitly via the library APIs. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value except in the circumstances outlined above. + * + * \note This global is only present if the user application can be a USB device. + * \n\n + * + * \see \ref USB_Device_States_t for a list of possible device states. + * + * \ingroup Group_Device + */ + extern volatile uint8_t USB_DeviceState; + #else + #define USB_DeviceState CONCAT_EXPANDED(GPIOR, DEVICE_STATE_AS_GPIOR) + #endif + #endif + + /* Function Prototypes: */ + /** This is the main USB management task. The USB driver requires this task to be executed + * continuously when the USB system is active (device attached in host mode, or attached to a host + * in device mode) in order to manage USB communications. This task may be executed inside an RTOS, + * fast timer ISR or the main user application loop. + * + * The USB task must be serviced within 30ms while in device mode, or within 1ms while in host mode. + * The task may be serviced at all times, or (for minimum CPU consumption): + * + * - In device mode, it may be disabled at start-up, enabled on the firing of the \ref EVENT_USB_Device_Connect() + * event and disabled again on the firing of the \ref EVENT_USB_Device_Disconnect() event. + * + * - In host mode, it may be disabled at start-up, enabled on the firing of the \ref EVENT_USB_Host_DeviceAttached() + * event and disabled again on the firing of the \ref EVENT_USB_Host_DeviceEnumerationComplete() or + * \ref EVENT_USB_Host_DeviceEnumerationFailed() events. + * + * If in device mode (only), the control endpoint can instead be managed via interrupts entirely by the library + * by defining the INTERRUPT_CONTROL_ENDPOINT token and passing it to the compiler via the -D switch. + * + * \see \ref Group_Events for more information on the USB events. + * + * \ingroup Group_USBManagement + */ + void USB_USBTask(void); + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_USBTASK_C) + #if defined(USB_CAN_BE_HOST) + static void USB_HostTask(void); + #endif + + #if defined(USB_CAN_BE_DEVICE) + static void USB_DeviceTask(void); + #endif + #endif + + /* Macros: */ + #define HOST_TASK_NONBLOCK_WAIT(Duration, NextState) do { USB_HostState = HOST_STATE_WaitForDevice; \ + WaitMSRemaining = (Duration); \ + PostWaitState = (NextState); } while (0) + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.c b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.c new file mode 100644 index 0000000000..470e128b64 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.c @@ -0,0 +1,49 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_XMEGA) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "../Device.h" + +void USB_Device_SendRemoteWakeup(void) +{ + USB.CTRLB |= USB_RWAKEUP_bm; +} + +#endif + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h new file mode 100644 index 0000000000..759ff350b3 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h @@ -0,0 +1,266 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Device definitions for the AVR XMEGA microcontrollers. + * \copydetails Group_Device_XMEGA + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_Device + * \defgroup Group_Device_XMEGA Device Management (XMEGA) + * \brief USB Device definitions for the AVR XMEGA microcontrollers. + * + * Architecture specific USB Device definitions for the Atmel AVR XMEGA microcontrollers. + * + * @{ + */ + +#ifndef __USBDEVICE_XMEGA_H__ +#define __USBDEVICE_XMEGA_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBController.h" + #include "../StdDescriptors.h" + #include "../USBInterrupt.h" + #include "../Endpoint.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + #if (defined(USE_RAM_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS)) + #error USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive. + #endif + + #if (defined(USE_FLASH_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS)) + #error USE_FLASH_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive. + #endif + + #if (defined(USE_FLASH_DESCRIPTORS) && defined(USE_RAM_DESCRIPTORS)) + #error USE_FLASH_DESCRIPTORS and USE_RAM_DESCRIPTORS are mutually exclusive. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name USB Device Mode Option Masks */ + //@{ + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in low speed (1.5Mb/s) mode. + * + * \note Low Speed mode is not available on all USB AVR models. + * \n + * + * \note Restrictions apply on the number, size and type of endpoints which can be used + * when running in low speed mode - refer to the USB 2.0 specification. + */ + #define USB_DEVICE_OPT_LOWSPEED (1 << 0) + + #if (F_USB > 6000000) + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in full speed (12Mb/s) mode. + */ + #define USB_DEVICE_OPT_FULLSPEED (0 << 0) + #endif + //@} + + #if (!defined(NO_INTERNAL_SERIAL) || defined(__DOXYGEN__)) + /** String descriptor index for the device's unique serial number string descriptor within the device. + * This unique serial number is used by the host to associate resources to the device (such as drivers or COM port + * number allocations) to a device regardless of the port it is plugged in to on the host. Some microcontrollers contain + * a unique serial number internally, and setting the device descriptors serial number string index to this value + * will cause it to use the internal serial number. + * + * On unsupported devices, this will evaluate to \ref NO_DESCRIPTOR and so will force the host to create a pseudo-serial + * number for the device. + */ + #define USE_INTERNAL_SERIAL 0xDC + + /** Length of the device's unique internal serial number, in bits, if present on the selected microcontroller + * model. + */ + #define INTERNAL_SERIAL_LENGTH_BITS (8 * (1 + (offsetof(NVM_PROD_SIGNATURES_t, COORDY1) - offsetof(NVM_PROD_SIGNATURES_t, LOTNUM0)))) + + /** Start address of the internal serial number, in the appropriate address space, if present on the selected microcontroller + * model. + */ + #define INTERNAL_SERIAL_START_ADDRESS offsetof(NVM_PROD_SIGNATURES_t, LOTNUM0) + #else + #define USE_INTERNAL_SERIAL NO_DESCRIPTOR + + #define INTERNAL_SERIAL_LENGTH_BITS 0 + #define INTERNAL_SERIAL_START_ADDRESS 0 + #endif + + /* Function Prototypes: */ + /** Sends a Remote Wakeup request to the host. This signals to the host that the device should + * be taken out of suspended mode, and communications should resume. + * + * Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the + * host computer when the host has suspended all USB devices to enter a low power state. + * + * \note This function should only be used if the device has indicated to the host that it + * supports the Remote Wakeup feature in the device descriptors, and should only be + * issued if the host is currently allowing remote wakeup events from the device (i.e., + * the \ref USB_Device_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP + * compile time option is used, this function is unavailable. + * \n\n + * + * \note The USB clock must be running for this function to operate. If the stack is initialized with + * the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running + * before attempting to call this function. + * + * \see \ref Group_StdDescriptors for more information on the RMWAKEUP feature and device descriptors. + */ + void USB_Device_SendRemoteWakeup(void); + + /* Inline Functions: */ + /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host) + * the frame number is incremented by one. + * + * \return Current USB frame number from the USB controller. + */ + static inline uint16_t USB_Device_GetFrameNumber(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline uint16_t USB_Device_GetFrameNumber(void) + { + return ((USB_EndpointTable_t*)USB.EPPTR)->FrameNum; + } + + #if !defined(NO_SOF_EVENTS) + /** Enables the device mode Start Of Frame events. When enabled, this causes the + * \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, + * at the start of each USB frame when enumerated in device mode. + * + * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_EnableSOFEvents(void) + { + USB.INTCTRLA |= USB_SOFIE_bm; + } + + /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the + * \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode. + * + * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_DisableSOFEvents(void) + { + USB.INTCTRLA &= ~USB_SOFIE_bm; + } + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Inline Functions: */ + static inline void USB_Device_SetLowSpeed(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetLowSpeed(void) + { + USB.CTRLA &= ~USB_SPEED_bm; + } + + static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetFullSpeed(void) + { + USB.CTRLA |= USB_SPEED_bm; + } + + static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetDeviceAddress(const uint8_t Address) + { + (void)Address; + + /* No implementation for XMEGA architecture */ + } + + static inline void USB_Device_EnableDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void USB_Device_EnableDeviceAddress(const uint8_t Address) + { + USB.ADDR = Address; + } + + static inline bool USB_Device_IsAddressSet(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline bool USB_Device_IsAddressSet(void) + { + return ((USB.ADDR != 0) ? true : false); + } + + static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString) ATTR_NON_NULL_PTR_ARG(1); + static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString) + { + uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask(); + GlobalInterruptDisable(); + + uint8_t SigReadAddress = INTERNAL_SERIAL_START_ADDRESS; + + for (uint8_t SerialCharNum = 0; SerialCharNum < (INTERNAL_SERIAL_LENGTH_BITS / 4); SerialCharNum++) + { + uint8_t SerialByte; + + NVM.CMD = NVM_CMD_READ_CALIB_ROW_gc; + SerialByte = pgm_read_byte(SigReadAddress); + NVM.CMD = 0; + + if (SerialCharNum & 0x01) + { + SerialByte >>= 4; + SigReadAddress++; + } + + SerialByte &= 0x0F; + + UnicodeString[SerialCharNum] = cpu_to_le16((SerialByte >= 10) ? + (('A' - 10) + SerialByte) : ('0' + SerialByte)); + } + + SetGlobalInterruptMask(CurrentGlobalInt); + } + + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c new file mode 100644 index 0000000000..6413281708 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c @@ -0,0 +1,275 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_XMEGA) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "EndpointStream_XMEGA.h" + +#if !defined(CONTROL_ONLY_DEVICE) +uint8_t Endpoint_Discard_Stream(uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t ErrorCode; + uint16_t BytesInTransfer = 0; + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + Length -= *BytesProcessed; + + while (Length) + { + if (!(Endpoint_IsReadWriteAllowed())) + { + Endpoint_ClearOUT(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return ENDPOINT_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + } + else + { + Endpoint_Discard_8(); + + Length--; + BytesInTransfer++; + } + } + + return ENDPOINT_RWSTREAM_NoError; +} + +uint8_t Endpoint_Null_Stream(uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t ErrorCode; + uint16_t BytesInTransfer = 0; + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + Length -= *BytesProcessed; + + while (Length) + { + if (!(Endpoint_IsReadWriteAllowed())) + { + Endpoint_ClearIN(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return ENDPOINT_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + } + else + { + Endpoint_Write_8(0); + + Length--; + BytesInTransfer++; + } + } + + return ENDPOINT_RWSTREAM_NoError; +} + +/* The following abuses the C preprocessor in order to copy-paste common code with slight alterations, + * so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */ + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_LE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_RW.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_BE +#define TEMPLATE_BUFFER_TYPE const void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_RW.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_LE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_RW.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_BE +#define TEMPLATE_BUFFER_TYPE void* +#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_RW.c" + +#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_LE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_BE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" +#endif + +#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_LE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_BE + #define TEMPLATE_BUFFER_TYPE const void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN() + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_LE + #define TEMPLATE_BUFFER_TYPE void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_RW.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_BE + #define TEMPLATE_BUFFER_TYPE void* + #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT() + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_RW.c" +#endif + +#endif + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_LE +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_Control_W.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_BE +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr) +#include "Template/Template_Endpoint_Control_W.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_LE +#define TEMPLATE_BUFFER_OFFSET(Length) 0 +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_Control_R.c" + +#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_BE +#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) +#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount +#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8() +#include "Template/Template_Endpoint_Control_R.c" + +#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_LE + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_Control_W.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_BE + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_Control_W.c" +#endif + +#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE) + #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_LE + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_Control_W.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_BE + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr)) + #include "Template/Template_Endpoint_Control_W.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_LE + #define TEMPLATE_BUFFER_OFFSET(Length) 0 + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_Control_R.c" + + #define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_BE + #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1) + #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount + #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8()) + #include "Template/Template_Endpoint_Control_R.c" +#endif + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h new file mode 100644 index 0000000000..3c094da49c --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h @@ -0,0 +1,658 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Endpoint data stream transmission and reception management for the AVR XMEGA microcontrollers. + * \copydetails Group_EndpointStreamRW_XMEGA + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_EndpointStreamRW + * \defgroup Group_EndpointStreamRW_XMEGA Read/Write of Multi-Byte Streams (XMEGA) + * \brief Endpoint data stream transmission and reception management for the Atmel AVR XMEGA architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing of data streams from + * and to endpoints. + * + * @{ + */ + +#ifndef __ENDPOINT_STREAM_XMEGA_H__ +#define __ENDPOINT_STREAM_XMEGA_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBMode.h" + #include "../USBTask.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Function Prototypes: */ + /** \name Stream functions for null data */ + //@{ + + /** Reads and discards the given number of bytes from the currently selected endpoint's bank, + * discarding fully read packets from the host as needed. The last packet is not automatically + * discarded once the remaining bytes has been read; the user is responsible for manually + * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes empty while there is still data to process (and after the current + * packet has been acknowledged) the BytesProcessed location will be updated with the total number + * of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Discard_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Discard_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Length Number of bytes to discard via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Discard_Stream(uint16_t Length, + uint16_t* const BytesProcessed); + + /** Writes a given number of zeroed bytes to the currently selected endpoint's bank, sending + * full packets to the host as needed. The last packet is not automatically sent once the + * remaining bytes have been written; the user is responsible for manually sending the last + * packet to the host via the \ref Endpoint_ClearIN() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes full while there is still data to process (and after the current + * packet transmission has been initiated) the BytesProcessed location will be updated with the + * total number of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Null_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Null_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Length Number of zero bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Null_Stream(uint16_t Length, + uint16_t* const BytesProcessed); + + //@} + + /** \name Stream functions for RAM source/destination data */ + //@{ + + /** Writes the given number of bytes to the endpoint from the given buffer in little endian, + * sending full packets to the host as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Endpoint_ClearIN() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes full while there is still data to process (and after the current + * packet transmission has been initiated) the BytesProcessed location will be updated with the + * total number of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream), + * NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream), + * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Stream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the endpoint from the given buffer in big endian, + * sending full packets to the host as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Endpoint_ClearIN() macro. + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Stream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the endpoint from the given buffer in little endian, + * discarding fully read packets from the host as needed. The last packet is not automatically + * discarded once the remaining bytes has been read; the user is responsible for manually + * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. + * + * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, + * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid + * storage location, the transfer will instead be performed as a series of chunks. Each time + * the endpoint bank becomes empty while there is still data to process (and after the current + * packet has been acknowledged) the BytesProcessed location will be updated with the total number + * of bytes processed in the stream, and the function will exit with an error code of + * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed + * in the user code - to continue the transfer, call the function again with identical parameters + * and it will resume until the BytesProcessed value reaches the total transfer length. + * + * <b>Single Stream Transfer Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * + * if ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream), + * NULL)) != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * <b>Partial Stream Transfers Example:</b> + * \code + * uint8_t DataStream[512]; + * uint8_t ErrorCode; + * uint16_t BytesProcessed; + * + * BytesProcessed = 0; + * while ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream), + * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer) + * { + * // Stream not yet complete - do other actions here, abort if required + * } + * + * if (ErrorCode != ENDPOINT_RWSTREAM_NoError) + * { + * // Stream failed to complete - check ErrorCode here + * } + * \endcode + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Stream_LE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the endpoint from the given buffer in big endian, + * discarding fully read packets from the host as needed. The last packet is not automatically + * discarded once the remaining bytes has been read; the user is responsible for manually + * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. + * + * \note This routine should not be used on CONTROL type endpoints. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Stream_BE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian, + * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared + * in both failure and success states; the user is responsible for manually clearing the status OUT packet + * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_Stream_LE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian, + * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared + * in both failure and success states; the user is responsible for manually clearing the status OUT packet + * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_Stream_BE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian, + * discarding fully read packets from the host as needed. The device IN acknowledgement is not + * automatically sent after success or failure states; the user is responsible for manually sending the + * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_Stream_LE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian, + * discarding fully read packets from the host as needed. The device IN acknowledgement is not + * automatically sent after success or failure states; the user is responsible for manually sending the + * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /** \name Stream functions for EEPROM source/destination data */ + //@{ + + /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_EStream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_EStream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer destination version of \ref Endpoint_Read_Stream_LE(). + * + * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_EStream_LE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer destination version of \ref Endpoint_Read_Stream_BE(). + * + * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be read at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_EStream_BE(void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_EStream_LE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE(). + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_EStream_BE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE(). + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_EStream_LE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE(). + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[out] Buffer Pointer to the destination data buffer to write to. + * \param[in] Length Number of bytes to send via the currently selected endpoint. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Read_Control_EStream_BE(void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /** \name Stream functions for PROGMEM source/destination data */ + //@{ + + /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_PStream_LE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** FLASH buffer source version of \ref Endpoint_Write_Stream_BE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current + * transaction should be updated, \c NULL if the entire stream should be written at once. + * + * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_PStream_BE(const void* const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1); + + /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_PStream_LE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + + /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \note This function automatically sends the last packet in the data stage of the transaction; when the + * function returns, the user is responsible for clearing the <b>status</b> stage of the transaction. + * Note that the status stage packet is sent or received in the opposite direction of the data flow. + * \n\n + * + * \note This routine should only be used on CONTROL type endpoints. + * \n\n + * + * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained + * together; i.e. the entire stream data must be read or written at the one time. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. + * + * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + */ + uint8_t Endpoint_Write_Control_PStream_BE(const void* const Buffer, + uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + //@} + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c new file mode 100644 index 0000000000..470f57ea29 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c @@ -0,0 +1,268 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_XMEGA) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "../Endpoint.h" + +#if !defined(FIXED_CONTROL_ENDPOINT_SIZE) +uint8_t USB_Device_ControlEndpointSize = ENDPOINT_CONTROLEP_DEFAULT_SIZE; +#endif + +Endpoint_FIFOPair_t USB_Endpoint_FIFOs[ENDPOINT_TOTAL_ENDPOINTS]; + +volatile uint8_t USB_Endpoint_SelectedEndpoint; +volatile USB_EP_t* USB_Endpoint_SelectedHandle; +volatile Endpoint_FIFO_t* USB_Endpoint_SelectedFIFO; + +bool Endpoint_IsINReady(void) +{ + Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint | ENDPOINT_DIR_IN); + + return ((USB_Endpoint_SelectedHandle->STATUS & USB_EP_BUSNACK0_bm) ? true : false); +} + +bool Endpoint_IsOUTReceived(void) +{ + Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint & ~ENDPOINT_DIR_IN); + + if (USB_Endpoint_SelectedHandle->STATUS & USB_EP_TRNCOMPL0_bm) + { + USB_Endpoint_SelectedFIFO->Length = USB_Endpoint_SelectedHandle->CNT; + return true; + } + + return false; +} + +bool Endpoint_IsSETUPReceived(void) +{ + Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint & ~ENDPOINT_DIR_IN); + + if (USB_Endpoint_SelectedHandle->STATUS & USB_EP_SETUP_bm) + { + USB_Endpoint_SelectedFIFO->Length = USB_Endpoint_SelectedHandle->CNT; + return true; + } + + return false; +} + +void Endpoint_ClearSETUP(void) +{ + Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint & ~ENDPOINT_DIR_IN); + USB_Endpoint_SelectedHandle->STATUS &= ~(USB_EP_SETUP_bm | USB_EP_TRNCOMPL0_bm | USB_EP_BUSNACK0_bm | USB_EP_OVF_bm); + USB_Endpoint_SelectedHandle->STATUS |= USB_EP_TOGGLE_bm; + USB_Endpoint_SelectedFIFO->Position = 0; + + Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint | ENDPOINT_DIR_IN); + USB_Endpoint_SelectedHandle->STATUS |= USB_EP_TOGGLE_bm; + USB_Endpoint_SelectedFIFO->Position = 0; +} + +void Endpoint_ClearIN(void) +{ + USB_Endpoint_SelectedHandle->CNT = USB_Endpoint_SelectedFIFO->Position; + USB_Endpoint_SelectedHandle->STATUS &= ~(USB_EP_TRNCOMPL0_bm | USB_EP_BUSNACK0_bm | USB_EP_OVF_bm); + USB_Endpoint_SelectedFIFO->Position = 0; +} + +void Endpoint_ClearOUT(void) +{ + USB_Endpoint_SelectedHandle->STATUS &= ~(USB_EP_TRNCOMPL0_bm | USB_EP_BUSNACK0_bm | USB_EP_OVF_bm); + USB_Endpoint_SelectedFIFO->Position = 0; +} + +void Endpoint_StallTransaction(void) +{ + USB_Endpoint_SelectedHandle->CTRL |= USB_EP_STALL_bm; + + if ((USB_Endpoint_SelectedHandle->CTRL & USB_EP_TYPE_gm) == USB_EP_TYPE_CONTROL_gc) + { + Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint ^ ENDPOINT_DIR_IN); + USB_Endpoint_SelectedHandle->CTRL |= USB_EP_STALL_bm; + } +} + +uint8_t Endpoint_Read_8(void) +{ + return USB_Endpoint_SelectedFIFO->Data[USB_Endpoint_SelectedFIFO->Position++]; +} + +void Endpoint_Write_8(const uint8_t Data) +{ + USB_Endpoint_SelectedFIFO->Data[USB_Endpoint_SelectedFIFO->Position++] = Data; +} + +void Endpoint_SelectEndpoint(const uint8_t Address) +{ + uint8_t EndpointNumber = (Address & ENDPOINT_EPNUM_MASK); + + USB_Endpoint_SelectedEndpoint = Address; + + Endpoint_FIFOPair_t* EndpointFIFOPair = &USB_Endpoint_FIFOs[EndpointNumber]; + USB_EndpointTable_t* EndpointTable = (USB_EndpointTable_t*)USB.EPPTR; + + if (Address & ENDPOINT_DIR_IN) + { + USB_Endpoint_SelectedFIFO = &EndpointFIFOPair->IN; + USB_Endpoint_SelectedHandle = &EndpointTable->Endpoints[EndpointNumber].IN; + } + else + { + USB_Endpoint_SelectedFIFO = &EndpointFIFOPair->OUT; + USB_Endpoint_SelectedHandle = &EndpointTable->Endpoints[EndpointNumber].OUT; + } +} + +bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Endpoint_ConfigureEndpoint(Table[i].Address, Table[i].Type, Table[i].Size, Table[i].Banks))) + { + return false; + } + } + + return true; +} + +bool Endpoint_ConfigureEndpoint_PRV(const uint8_t Address, + const uint8_t Config, + const uint8_t Size) +{ + Endpoint_SelectEndpoint(Address); + + USB_Endpoint_SelectedHandle->CTRL = 0; + USB_Endpoint_SelectedHandle->STATUS = (Address & ENDPOINT_DIR_IN) ? USB_EP_BUSNACK0_bm : 0; + USB_Endpoint_SelectedHandle->CTRL = Config; + USB_Endpoint_SelectedHandle->CNT = 0; + USB_Endpoint_SelectedHandle->DATAPTR = (intptr_t)USB_Endpoint_SelectedFIFO->Data; + + USB_Endpoint_SelectedFIFO->Length = (Address & ENDPOINT_DIR_IN) ? Size : 0; + USB_Endpoint_SelectedFIFO->Position = 0; + + return true; +} + +void Endpoint_ClearEndpoints(void) +{ + for (uint8_t EPNum = 0; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++) + { + ((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EPNum].IN.CTRL = 0; + ((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EPNum].OUT.CTRL = 0; + } +} + +void Endpoint_ClearStatusStage(void) +{ + if (USB_ControlRequest.bmRequestType & REQDIR_DEVICETOHOST) + { + while (!(Endpoint_IsOUTReceived())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + + Endpoint_ClearOUT(); + } + else + { + while (!(Endpoint_IsINReady())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + + Endpoint_ClearIN(); + } +} + +#if !defined(CONTROL_ONLY_DEVICE) +uint8_t Endpoint_WaitUntilReady(void) +{ + #if (USB_STREAM_TIMEOUT_MS < 0xFF) + uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #else + uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #endif + + uint16_t PreviousFrameNumber = USB_Device_GetFrameNumber(); + + for (;;) + { + if (Endpoint_GetEndpointDirection() == ENDPOINT_DIR_IN) + { + if (Endpoint_IsINReady()) + return ENDPOINT_READYWAIT_NoError; + } + else + { + if (Endpoint_IsOUTReceived()) + return ENDPOINT_READYWAIT_NoError; + } + + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_READYWAIT_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_READYWAIT_BusSuspended; + else if (Endpoint_IsStalled()) + return ENDPOINT_READYWAIT_EndpointStalled; + + uint16_t CurrentFrameNumber = USB_Device_GetFrameNumber(); + + if (CurrentFrameNumber != PreviousFrameNumber) + { + PreviousFrameNumber = CurrentFrameNumber; + + if (!(TimeoutMSRem--)) + return ENDPOINT_READYWAIT_Timeout; + } + } +} +#endif + +#endif + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h new file mode 100644 index 0000000000..db7d840d2e --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h @@ -0,0 +1,689 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Endpoint definitions for the AVR XMEGA microcontrollers. + * \copydetails Group_EndpointManagement_XMEGA + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_EndpointRW + * \defgroup Group_EndpointRW_XMEGA Endpoint Data Reading and Writing (XMEGA) + * \brief Endpoint data read/write definitions for the Atmel AVR XMEGA architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing from and to endpoints. + */ + +/** \ingroup Group_EndpointPrimitiveRW + * \defgroup Group_EndpointPrimitiveRW_XMEGA Read/Write of Primitive Data Types (XMEGA) + * \brief Endpoint primitive read/write definitions for the Atmel AVR XMEGA architecture. + * + * Functions, macros, variables, enums and types related to data reading and writing of primitive data types + * from and to endpoints. + */ + +/** \ingroup Group_EndpointPacketManagement + * \defgroup Group_EndpointPacketManagement_XMEGA Endpoint Packet Management (XMEGA) + * \brief Endpoint packet management definitions for the Atmel AVR XMEGA architecture. + * + * Functions, macros, variables, enums and types related to packet management of endpoints. + */ + +/** \ingroup Group_EndpointManagement + * \defgroup Group_EndpointManagement_XMEGA Endpoint Management (XMEGA) + * \brief Endpoint management definitions for the Atmel AVR XMEGA architecture. + * + * Functions, macros and enums related to endpoint management when in USB Device mode. This + * module contains the endpoint management macros, as well as endpoint interrupt and data + * send/receive functions for various data types. + * + * @{ + */ + +#ifndef __ENDPOINT_XMEGA_H__ +#define __ENDPOINT_XMEGA_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBTask.h" + #include "../USBInterrupt.h" + #include "../USBController.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + #if (!defined(MAX_ENDPOINT_INDEX) && !defined(CONTROL_ONLY_DEVICE)) || defined(__DOXYGEN__) + /** Total number of endpoints (including the default control endpoint at address 0) which may + * be used in the device. Different USB AVR models support different amounts of endpoints, + * this value reflects the maximum number of endpoints for the currently selected AVR model. + */ + #define ENDPOINT_TOTAL_ENDPOINTS 16 + #else + #if defined(CONTROL_ONLY_DEVICE) + #define ENDPOINT_TOTAL_ENDPOINTS 1 + #else + #define ENDPOINT_TOTAL_ENDPOINTS (MAX_ENDPOINT_INDEX + 1) + #endif + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Type Defines: */ + typedef struct + { + uint8_t Data[64]; + + uint8_t Length; + uint8_t Position; + } Endpoint_FIFO_t; + + typedef struct + { + Endpoint_FIFO_t OUT; + Endpoint_FIFO_t IN; + } Endpoint_FIFOPair_t; + + /* External Variables: */ + extern Endpoint_FIFOPair_t USB_Endpoint_FIFOs[ENDPOINT_TOTAL_ENDPOINTS]; + extern volatile uint8_t USB_Endpoint_SelectedEndpoint; + extern volatile USB_EP_t* USB_Endpoint_SelectedHandle; + extern volatile Endpoint_FIFO_t* USB_Endpoint_SelectedFIFO; + + /* Inline Functions: */ + static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST + ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) + { + uint8_t MaskVal = 0; + uint16_t CheckBytes = 8; + + while (CheckBytes < Bytes) + { + MaskVal++; + CheckBytes <<= 1; + } + + return (MaskVal << USB_EP_BUFSIZE_gp); + } + + /* Function Prototypes: */ + bool Endpoint_ConfigureEndpoint_PRV(const uint8_t Address, + const uint8_t Config, + const uint8_t Size); + void Endpoint_ClearEndpoints(void); + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) + /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size + * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined. + */ + #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8 + #endif + + /* Enums: */ + /** Enum for the possible error return codes of the \ref Endpoint_WaitUntilReady() function. + * + * \ingroup Group_EndpointRW_XMEGA + */ + enum Endpoint_WaitUntilReady_ErrorCodes_t + { + ENDPOINT_READYWAIT_NoError = 0, /**< Endpoint is ready for next packet, no error. */ + ENDPOINT_READYWAIT_EndpointStalled = 1, /**< The endpoint was stalled during the stream + * transfer by the host or device. + */ + ENDPOINT_READYWAIT_DeviceDisconnected = 2, /**< Device was disconnected from the host while + * waiting for the endpoint to become ready. + */ + ENDPOINT_READYWAIT_BusSuspended = 3, /**< The USB bus has been suspended by the host and + * no USB endpoint traffic can occur until the bus + * has resumed. + */ + ENDPOINT_READYWAIT_Timeout = 4, /**< The host failed to accept or send the next packet + * within the software timeout period set by the + * \ref USB_STREAM_TIMEOUT_MS macro. + */ + }; + + /* Inline Functions: */ + /** Selects the given endpoint address. + * + * Any endpoint operations which do not require the endpoint address to be indicated will operate on + * the currently selected endpoint. + * + * \param[in] Address Endpoint address to select. + */ + void Endpoint_SelectEndpoint(const uint8_t Address); + + /** Configures the specified endpoint address with the given endpoint type, bank size and number of hardware + * banks. Once configured, the endpoint may be read from or written to, depending on its direction. + * + * \param[in] Address Endpoint address to configure. + * + * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types + * are available on Low Speed USB devices - refer to the USB 2.0 specification. + * + * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted + * to the USB host, or after they have been received from the USB host (depending on + * the endpoint's data direction). The bank size must indicate the maximum packet size + * that the endpoint can handle. + * + * \param[in] Banks Number of hardware banks to use for the endpoint being configured. + * + * \note The default control endpoint should not be manually configured by the user application, as + * it is automatically configured by the library internally. + * \n\n + * + * \note This routine will automatically select the specified endpoint. + * + * \return Boolean \c true if the configuration succeeded, \c false otherwise. + */ + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, + const uint8_t Type, + const uint16_t Size, + const uint8_t Banks) ATTR_ALWAYS_INLINE; + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, + const uint8_t Type, + const uint16_t Size, + const uint8_t Banks) + { + uint8_t EPConfigMask = (USB_EP_INTDSBL_bm | ((Banks > 1) ? USB_EP_PINGPONG_bm : 0) | Endpoint_BytesToEPSizeMask(Size)); + + if ((Address & ENDPOINT_EPNUM_MASK) >= ENDPOINT_TOTAL_ENDPOINTS) + return false; + + // TODO - Fix once limitations are lifted + EPConfigMask &= ~USB_EP_PINGPONG_bm; + if (Size > 64) + return false; + + switch (Type) + { + case EP_TYPE_CONTROL: + EPConfigMask |= USB_EP_TYPE_CONTROL_gc; + break; + case EP_TYPE_ISOCHRONOUS: + EPConfigMask |= USB_EP_TYPE_ISOCHRONOUS_gc; + break; + default: + EPConfigMask |= USB_EP_TYPE_BULK_gc; + break; + } + + if (Type == EP_TYPE_CONTROL) + Endpoint_ConfigureEndpoint_PRV(Address ^ ENDPOINT_DIR_IN, EPConfigMask, Size); + + return Endpoint_ConfigureEndpoint_PRV(Address, EPConfigMask, Size); + } + + /** Indicates the number of bytes currently stored in the current endpoint's selected bank. + * + * \ingroup Group_EndpointRW_XMEGA + * + * \return Total number of bytes in the currently selected Endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_BytesInEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_BytesInEndpoint(void) + { + if (USB_Endpoint_SelectedEndpoint & ENDPOINT_DIR_IN) + return USB_Endpoint_SelectedFIFO->Position; + else + return (USB_Endpoint_SelectedFIFO->Length - USB_Endpoint_SelectedFIFO->Position); + } + + /** Get the endpoint address of the currently selected endpoint. This is typically used to save + * the currently selected endpoint so that it can be restored after another endpoint has been + * manipulated. + * + * \return Index of the currently selected endpoint. + */ + static inline uint8_t Endpoint_GetCurrentEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetCurrentEndpoint(void) + { + return USB_Endpoint_SelectedEndpoint; + } + + /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's + * data In and Out pointers to the bank's contents. + * + * \param[in] Address Endpoint address whose FIFO buffers are to be reset. + */ + static inline void Endpoint_ResetEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetEndpoint(const uint8_t Address) + { + if (Address & ENDPOINT_DIR_IN) + USB_Endpoint_FIFOs[Address & ENDPOINT_EPNUM_MASK].IN.Position = 0; + else + USB_Endpoint_FIFOs[Address & ENDPOINT_EPNUM_MASK].OUT.Position = 0; + } + + /** Determines if the currently selected endpoint is enabled, but not necessarily configured. + * + * \return Boolean \c true if the currently selected endpoint is enabled, \c false otherwise. + */ + static inline bool Endpoint_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsEnabled(void) + { + return true; + } + + /** Aborts all pending IN transactions on the currently selected endpoint, once the bank + * has been queued for transmission to the host via \ref Endpoint_ClearIN(). This function + * will terminate all queued transactions, resetting the endpoint banks ready for a new + * packet. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + */ + static inline void Endpoint_AbortPendingIN(void) + { + USB_Endpoint_SelectedHandle->STATUS |= USB_EP_BUSNACK0_bm; + } + + /** Determines if the currently selected endpoint may be read from (if data is waiting in the endpoint + * bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an IN + * direction). This function will return false if an error has occurred in the endpoint, if the endpoint + * is an OUT direction and no packet (or an empty packet) has been received, or if the endpoint is an IN + * direction and the endpoint bank is full. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + * + * \return Boolean \c true if the currently selected endpoint may be read from or written to, depending + * on its direction. + */ + static inline bool Endpoint_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsReadWriteAllowed(void) + { + return (USB_Endpoint_SelectedFIFO->Position < USB_Endpoint_SelectedFIFO->Length); + } + + /** Determines if the currently selected endpoint is configured. + * + * \return Boolean \c true if the currently selected endpoint has been configured, \c false otherwise. + */ + static inline bool Endpoint_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsConfigured(void) + { + return ((USB_Endpoint_SelectedHandle->CTRL & USB_EP_TYPE_gm) ? true : false); + } + + /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + * + * \return Boolean \c true if the current endpoint is ready for an IN packet, \c false otherwise. + */ + bool Endpoint_IsINReady(void) ATTR_WARN_UNUSED_RESULT; + + /** Determines if the selected OUT endpoint has received new packet from the host. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + * + * \return Boolean \c true if current endpoint is has received an OUT packet, \c false otherwise. + */ + bool Endpoint_IsOUTReceived(void) ATTR_WARN_UNUSED_RESULT; + + /** Determines if the current CONTROL type endpoint has received a SETUP packet. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + * + * \return Boolean \c true if the selected endpoint has received a SETUP packet, \c false otherwise. + */ + bool Endpoint_IsSETUPReceived(void) ATTR_WARN_UNUSED_RESULT; + + /** Clears a received SETUP packet on the currently selected CONTROL type endpoint, freeing up the + * endpoint for the next packet. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + * + * \note This is not applicable for non CONTROL type endpoints. + */ + void Endpoint_ClearSETUP(void); + + /** Sends an IN packet to the host on the currently selected endpoint, freeing up the endpoint for the + * next packet and switching to the alternative endpoint bank if double banked. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + */ + void Endpoint_ClearIN(void); + + /** Acknowledges an OUT packet to the host on the currently selected endpoint, freeing up the endpoint + * for the next packet and switching to the alternative endpoint bank if double banked. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + */ + void Endpoint_ClearOUT(void); + + /** Stalls the current endpoint, indicating to the host that a logical problem occurred with the + * indicated endpoint and that the current transfer sequence should be aborted. This provides a + * way for devices to indicate invalid commands to the host so that the current transfer can be + * aborted and the host can begin its own recovery sequence. + * + * The currently selected endpoint remains stalled until either the \ref Endpoint_ClearStall() macro + * is called, or the host issues a CLEAR FEATURE request to the device for the currently selected + * endpoint. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + */ + void Endpoint_StallTransaction(void); + + /** Clears the STALL condition on the currently selected endpoint. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + */ + static inline void Endpoint_ClearStall(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearStall(void) + { + USB_Endpoint_SelectedHandle->CTRL &= ~USB_EP_STALL_bm; + } + + /** Determines if the currently selected endpoint is stalled, \c false otherwise. + * + * \ingroup Group_EndpointPacketManagement_XMEGA + * + * \return Boolean \c true if the currently selected endpoint is stalled, \c false otherwise. + */ + static inline bool Endpoint_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsStalled(void) + { + return ((USB_Endpoint_SelectedHandle->CTRL & USB_EP_STALL_bm) ? true : false); + } + + /** Resets the data toggle of the currently selected endpoint. */ + static inline void Endpoint_ResetDataToggle(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetDataToggle(void) + { + USB_Endpoint_SelectedHandle->STATUS &= ~USB_EP_TOGGLE_bm; + } + + /** Determines the currently selected endpoint's direction. + * + * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask. + */ + static inline uint8_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetEndpointDirection(void) + { + return (USB_Endpoint_SelectedEndpoint & ENDPOINT_DIR_IN); + } + + /** Reads one byte from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \return Next byte in the currently selected endpoint's FIFO buffer. + */ + uint8_t Endpoint_Read_8(void) ATTR_WARN_UNUSED_RESULT; + + /** Writes one byte to the currently selected endpoint's bank, for IN direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \param[in] Data Data to write into the the currently selected endpoint's FIFO buffer. + */ + void Endpoint_Write_8(const uint8_t Data); + + /** Discards one byte from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + */ + static inline void Endpoint_Discard_8(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_8(void) + { + USB_Endpoint_SelectedFIFO->Position++; + } + + /** Reads two bytes from the currently selected endpoint's bank in little endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \return Next two bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_Read_16_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_Read_16_LE(void) + { + uint16_t Byte0 = Endpoint_Read_8(); + uint16_t Byte1 = Endpoint_Read_8(); + + return ((Byte1 << 8) | Byte0); + } + + /** Reads two bytes from the currently selected endpoint's bank in big endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \return Next two bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_Read_16_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_Read_16_BE(void) + { + uint16_t Byte0 = Endpoint_Read_8(); + uint16_t Byte1 = Endpoint_Read_8(); + + return ((Byte0 << 8) | Byte1); + } + + /** Writes two bytes to the currently selected endpoint's bank in little endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_16_LE(const uint16_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_16_LE(const uint16_t Data) + { + Endpoint_Write_8(Data & 0xFF); + Endpoint_Write_8(Data >> 8); + } + + /** Writes two bytes to the currently selected endpoint's bank in big endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_16_BE(const uint16_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_16_BE(const uint16_t Data) + { + Endpoint_Write_8(Data >> 8); + Endpoint_Write_8(Data & 0xFF); + } + + /** Discards two bytes from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + */ + static inline void Endpoint_Discard_16(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_16(void) + { + Endpoint_Discard_8(); + Endpoint_Discard_8(); + } + + /** Reads four bytes from the currently selected endpoint's bank in little endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \return Next four bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint32_t Endpoint_Read_32_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_Read_32_LE(void) + { + uint32_t Byte0 = Endpoint_Read_8(); + uint32_t Byte1 = Endpoint_Read_8(); + uint32_t Byte2 = Endpoint_Read_8(); + uint32_t Byte3 = Endpoint_Read_8(); + + return ((Byte3 << 24) | (Byte2 << 16) | (Byte1 << 8) | Byte0); + } + + /** Reads four bytes from the currently selected endpoint's bank in big endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \return Next four bytes in the currently selected endpoint's FIFO buffer. + */ + static inline uint32_t Endpoint_Read_32_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_Read_32_BE(void) + { + uint32_t Byte0 = Endpoint_Read_8(); + uint32_t Byte1 = Endpoint_Read_8(); + uint32_t Byte2 = Endpoint_Read_8(); + uint32_t Byte3 = Endpoint_Read_8(); + + return ((Byte0 << 24) | (Byte1 << 16) | (Byte2 << 8) | Byte3); + } + + /** Writes four bytes to the currently selected endpoint's bank in little endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_32_LE(const uint32_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_32_LE(const uint32_t Data) + { + Endpoint_Write_8(Data & 0xFF); + Endpoint_Write_8(Data >> 8); + Endpoint_Write_8(Data >> 16); + Endpoint_Write_8(Data >> 24); + } + + /** Writes four bytes to the currently selected endpoint's bank in big endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + * + * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_32_BE(const uint32_t Data) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_32_BE(const uint32_t Data) + { + Endpoint_Write_8(Data >> 24); + Endpoint_Write_8(Data >> 16); + Endpoint_Write_8(Data >> 8); + Endpoint_Write_8(Data & 0xFF); + } + + /** Discards four bytes from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_XMEGA + */ + static inline void Endpoint_Discard_32(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_32(void) + { + Endpoint_Discard_8(); + Endpoint_Discard_8(); + Endpoint_Discard_8(); + Endpoint_Discard_8(); + } + + /* External Variables: */ + /** Global indicating the maximum packet size of the default control endpoint located at address + * 0 in the device. This value is set to the value indicated in the device descriptor in the user + * project once the USB interface is initialized into device mode. + * + * If space is an issue, it is possible to fix this to a static value by defining the control + * endpoint size in the \c FIXED_CONTROL_ENDPOINT_SIZE token passed to the compiler in the makefile + * via the -D switch. When a fixed control endpoint size is used, the size is no longer dynamically + * read from the descriptors at runtime and instead fixed to the given value. When used, it is + * important that the descriptor control endpoint size value matches the size given as the + * \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token + * be used in the device descriptors to ensure this. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) + extern uint8_t USB_Device_ControlEndpointSize; + #else + #define USB_Device_ControlEndpointSize FIXED_CONTROL_ENDPOINT_SIZE + #endif + + /* Function Prototypes: */ + /** Configures a table of endpoint descriptions, in sequence. This function can be used to configure multiple + * endpoints at the same time. + * + * \note Endpoints with a zero address will be ignored, thus this function cannot be used to configure the + * control endpoint. + * + * \param[in] Table Pointer to a table of endpoint descriptions. + * \param[in] Entries Number of entries in the endpoint table to configure. + * + * \return Boolean \c true if all endpoints configured successfully, \c false otherwise. + */ + bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries); + + /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, + * with respect to the data direction. This is a convenience function which can be used to + * simplify user control request handling. + * + * \note This routine should not be called on non CONTROL type endpoints. + */ + void Endpoint_ClearStatusStage(void); + + /** Spin-loops until the currently selected non-control endpoint is ready for the next packet of data + * to be read or written to it. + * + * \note This routine should not be called on CONTROL type endpoints. + * + * \ingroup Group_EndpointRW_XMEGA + * + * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t Endpoint_WaitUntilReady(void); + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Host_XMEGA.c b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Host_XMEGA.c new file mode 100644 index 0000000000..b8b8c462cc --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Host_XMEGA.c @@ -0,0 +1,41 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_XMEGA) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/PipeStream_XMEGA.c b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/PipeStream_XMEGA.c new file mode 100644 index 0000000000..b8b8c462cc --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/PipeStream_XMEGA.c @@ -0,0 +1,41 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_XMEGA) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Pipe_XMEGA.c b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Pipe_XMEGA.c new file mode 100644 index 0000000000..bb92b1d763 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Pipe_XMEGA.c @@ -0,0 +1,37 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c new file mode 100644 index 0000000000..c923f31017 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c @@ -0,0 +1,86 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (void* const Buffer, + uint16_t Length) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + + Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint & ~ENDPOINT_DIR_IN); + + if (!(Length)) + Endpoint_ClearOUT(); + + while (Length) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + else if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + + if (Endpoint_IsOUTReceived()) + { + while (Length && Endpoint_BytesInEndpoint()) + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + } + + Endpoint_ClearOUT(); + } + } + + while (!(Endpoint_IsINReady())) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + } + + return ENDPOINT_RWCSTREAM_NoError; +} + +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_TRANSFER_BYTE + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c new file mode 100644 index 0000000000..b32de813df --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c @@ -0,0 +1,97 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (const void* const Buffer, + uint16_t Length) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + bool LastPacketFull = false; + + Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint | ENDPOINT_DIR_IN); + + if (Length > USB_ControlRequest.wLength) + Length = USB_ControlRequest.wLength; + else if (!(Length)) + Endpoint_ClearIN(); + + while (Length || LastPacketFull) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + else if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + else if (Endpoint_IsOUTReceived()) + break; + + if (Endpoint_IsINReady()) + { + uint16_t BytesInEndpoint = Endpoint_BytesInEndpoint(); + + while (Length && (BytesInEndpoint < USB_Device_ControlEndpointSize)) + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + BytesInEndpoint++; + } + + LastPacketFull = (BytesInEndpoint == USB_Device_ControlEndpointSize); + Endpoint_ClearIN(); + } + } + + while (!(Endpoint_IsOUTReceived())) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + else if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + } + + return ENDPOINT_RWCSTREAM_NoError; +} + +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_TRANSFER_BYTE + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c new file mode 100644 index 0000000000..e55e592eb2 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c @@ -0,0 +1,89 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if defined(TEMPLATE_FUNC_NAME) + +uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + uint16_t BytesInTransfer = 0; + uint8_t ErrorCode; + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + { + Length -= *BytesProcessed; + TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed); + } + + while (Length) + { + if (!(Endpoint_IsReadWriteAllowed())) + { + TEMPLATE_CLEAR_ENDPOINT(); + + #if !defined(INTERRUPT_CONTROL_ENDPOINT) + USB_USBTask(); + #endif + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return ENDPOINT_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + } + else + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + BytesInTransfer++; + } + } + + return ENDPOINT_RWSTREAM_NoError; +} + +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_BUFFER_TYPE +#undef TEMPLATE_TRANSFER_BYTE +#undef TEMPLATE_CLEAR_ENDPOINT +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE + +#endif + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c new file mode 100644 index 0000000000..4eea57a0bf --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c @@ -0,0 +1,204 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_XMEGA) + +#define __INCLUDE_FROM_USB_DRIVER +#define __INCLUDE_FROM_USB_CONTROLLER_C +#include "../USBController.h" + +#if defined(USB_CAN_BE_BOTH) +volatile uint8_t USB_CurrentMode = USB_MODE_None; +#endif + +#if !defined(USE_STATIC_OPTIONS) +volatile uint8_t USB_Options; +#endif + +/* Ugly workaround to ensure an aligned table, since __BIGGEST_ALIGNMENT__ == 1 for the 8-bit AVR-GCC toolchain */ +uint8_t USB_EndpointTable[sizeof(USB_EndpointTable_t) + 1]; + +void USB_Init( + #if defined(USB_CAN_BE_BOTH) + const uint8_t Mode + #endif + + #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) + , + #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS)) + void + #endif + + #if !defined(USE_STATIC_OPTIONS) + const uint8_t Options + #endif + ) +{ + #if !defined(USE_STATIC_OPTIONS) + USB_Options = Options; + #endif + + uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask(); + GlobalInterruptDisable(); + + NVM.CMD = NVM_CMD_READ_CALIB_ROW_gc; + USB.CAL0 = pgm_read_byte(offsetof(NVM_PROD_SIGNATURES_t, USBCAL0)); + USB.CAL1 = pgm_read_byte(offsetof(NVM_PROD_SIGNATURES_t, USBCAL1)); + NVM.CMD = NVM_CMD_NO_OPERATION_gc; + + /* Ugly workaround to ensure an aligned table, since __BIGGEST_ALIGNMENT__ == 1 for the 8-bit AVR-GCC toolchain */ + USB.EPPTR = ((intptr_t)&USB_EndpointTable[1] & ~(1 << 0)); + USB.CTRLA = (USB_STFRNUM_bm | ((ENDPOINT_TOTAL_ENDPOINTS - 1) << USB_MAXEP_gp)); + + if ((USB_Options & USB_OPT_BUSEVENT_PRIHIGH) == USB_OPT_BUSEVENT_PRIHIGH) + USB.INTCTRLA = (3 << USB_INTLVL_gp); + else if ((USB_Options & USB_OPT_BUSEVENT_PRIMED) == USB_OPT_BUSEVENT_PRIMED) + USB.INTCTRLA = (2 << USB_INTLVL_gp); + else + USB.INTCTRLA = (1 << USB_INTLVL_gp); + + SetGlobalInterruptMask(CurrentGlobalInt); + + #if defined(USB_CAN_BE_BOTH) + USB_CurrentMode = Mode; + #endif + + USB_IsInitialized = true; + + USB_ResetInterface(); +} + +void USB_Disable(void) +{ + USB_INT_DisableAllInterrupts(); + USB_INT_ClearAllInterrupts(); + + USB_Detach(); + USB_Controller_Disable(); + + USB_IsInitialized = false; +} + +void USB_ResetInterface(void) +{ + uint8_t PrescalerNeeded; + + #if defined(USB_DEVICE_OPT_FULLSPEED) + if (USB_Options & USB_DEVICE_OPT_LOWSPEED) + PrescalerNeeded = F_USB / 6000000; + else + PrescalerNeeded = F_USB / 48000000; + #else + PrescalerNeeded = F_USB / 6000000; + #endif + + uint8_t DividerIndex = 0; + while (PrescalerNeeded > 0) + { + DividerIndex++; + PrescalerNeeded >>= 1; + } + + CLK.USBCTRL = (DividerIndex - 1) << CLK_USBPSDIV_gp; + + if (USB_Options & USB_OPT_PLLCLKSRC) + CLK.USBCTRL |= (CLK_USBSRC_PLL_gc | CLK_USBSEN_bm); + else + CLK.USBCTRL |= (CLK_USBSRC_RC32M_gc | CLK_USBSEN_bm); + + USB_Device_SetDeviceAddress(0); + + USB_INT_DisableAllInterrupts(); + USB_INT_ClearAllInterrupts(); + + USB_Controller_Reset(); + USB_Init_Device(); +} + +#if defined(USB_CAN_BE_DEVICE) +static void USB_Init_Device(void) +{ + USB_DeviceState = DEVICE_STATE_Unattached; + USB_Device_ConfigurationNumber = 0; + + #if !defined(NO_DEVICE_REMOTE_WAKEUP) + USB_Device_RemoteWakeupEnabled = false; + #endif + + #if !defined(NO_DEVICE_SELF_POWER) + USB_Device_CurrentlySelfPowered = false; + #endif + + #if !defined(FIXED_CONTROL_ENDPOINT_SIZE) + USB_Descriptor_Device_t* DeviceDescriptorPtr; + + #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \ + !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS)) + uint8_t DescriptorAddressSpace; + + if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr, &DescriptorAddressSpace) != NO_DESCRIPTOR) + { + if (DescriptorAddressSpace == MEMSPACE_FLASH) + USB_Device_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size); + else if (DescriptorAddressSpace == MEMSPACE_EEPROM) + USB_Device_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size); + else + USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size; + } + #else + if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR) + { + #if defined(USE_RAM_DESCRIPTORS) + USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size; + #elif defined(USE_EEPROM_DESCRIPTORS) + USB_Device_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size); + #else + USB_Device_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size); + #endif + } + #endif + #endif + + if (USB_Options & USB_DEVICE_OPT_LOWSPEED) + USB_Device_SetLowSpeed(); + else + USB_Device_SetFullSpeed(); + + Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, + USB_Device_ControlEndpointSize, 1); + + USB_INT_Enable(USB_INT_BUSEVENTI); + + USB_Attach(); +} +#endif + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h new file mode 100644 index 0000000000..6bab03a7d3 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h @@ -0,0 +1,313 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Controller definitions for the AVR XMEGA microcontrollers. + * \copydetails Group_USBManagement_XMEGA + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USBManagement + * \defgroup Group_USBManagement_XMEGA USB Interface Management (XMEGA) + * \brief USB Controller definitions for the AVR XMEGA microcontrollers. + * + * Functions, macros, variables, enums and types related to the setup and management of the USB interface. + * + * @{ + */ + +#ifndef __USBCONTROLLER_XMEGA_H__ +#define __USBCONTROLLER_XMEGA_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBMode.h" + #include "../Events.h" + #include "../USBTask.h" + #include "../USBInterrupt.h" + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #if defined(MAX_ENDPOINT_INDEX) + #define ENDPOINT_TABLE_COUNT (MAX_ENDPOINT_INDEX + 1) + #else + #define ENDPOINT_TABLE_COUNT 16 + #endif + + /* Type Defines: */ + typedef struct + { + struct + { + USB_EP_t OUT; + USB_EP_t IN; + } Endpoints[ENDPOINT_TABLE_COUNT]; + uint16_t FrameNum; + } ATTR_PACKED USB_EndpointTable_t; + + /* External Variables: */ + extern uint8_t USB_EndpointTable[]; + #endif + + /* Includes: */ + #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) + #include "../Device.h" + #include "../Endpoint.h" + #include "../DeviceStandardReq.h" + #include "../EndpointStream.h" + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks and Defines: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + #if !defined(F_USB) + #error F_USB is not defined. You must define F_USB to the frequency of the unprescaled USB controller clock in your project makefile. + #endif + + #if ((F_USB % 6000000) || (F_USB < 6000000)) + #error Invalid F_USB specified. F_USB must be a multiple of 6MHz for USB Low Speed operation, and a multiple of 48MHz for Full Speed operation. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name USB Controller Option Masks */ + //@{ + /** Sets the USB bus interrupt priority level to be low priority. The USB bus interrupt is used for Start of Frame events, bus suspend + * and resume events, bus reset events and other events related to the management of the USB bus. + */ + #define USB_OPT_BUSEVENT_PRILOW ((0 << 2) | (0 << 1)) + + /** Sets the USB bus interrupt priority level to be medium priority. The USB bus interrupt is used for Start of Frame events, bus suspend + * and resume events, bus reset events and other events related to the management of the USB bus. + */ + #define USB_OPT_BUSEVENT_PRIMED ((0 << 2) | (1 << 1)) + + /** Sets the USB bus interrupt priority level to be high priority. The USB bus interrupt is used for Start of Frame events, bus suspend + * and resume events, bus reset events and other events related to the management of the USB bus. + */ + #define USB_OPT_BUSEVENT_PRIHIGH ((1 << 2) | (0 << 1)) + + /** Sets the USB controller to source its clock from the internal RC 32MHz clock, once it has been DFLL calibrated to 48MHz. */ + #define USB_OPT_RC32MCLKSRC (0 << 3) + + /** Sets the USB controller to source its clock from the internal PLL. */ + #define USB_OPT_PLLCLKSRC (1 << 3) + //@} + + #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__) + /** Constant for the maximum software timeout period of the USB data stream transfer functions + * (both control and standard) when in either device or host mode. If the next packet of a stream + * is not received or acknowledged within this time period, the stream function will fail. + * + * This value may be overridden in the user project makefile as the value of the + * \ref USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch. + */ + #define USB_STREAM_TIMEOUT_MS 100 + #endif + + /* Inline Functions: */ + /** Detaches the device from the USB bus. This has the effect of removing the device from any + * attached host, ceasing USB communications. If no host is present, this prevents any host from + * enumerating the device once attached until \ref USB_Attach() is called. + */ + static inline void USB_Detach(void) ATTR_ALWAYS_INLINE; + static inline void USB_Detach(void) + { + USB.CTRLB &= ~USB_ATTACH_bm; + } + + /** Attaches the device to the USB bus. This announces the device's presence to any attached + * USB host, starting the enumeration process. If no host is present, attaching the device + * will allow for enumeration once a host is connected to the device. + * + * This is inexplicably also required for proper operation while in host mode, to enable the + * attachment of a device to the host. This is despite the bit being located in the device-mode + * register and despite the datasheet making no mention of its requirement in host mode. + */ + static inline void USB_Attach(void) ATTR_ALWAYS_INLINE; + static inline void USB_Attach(void) + { + USB.CTRLB |= USB_ATTACH_bm; + } + + /* Function Prototypes: */ + /** Main function to initialize and start the USB interface. Once active, the USB interface will + * allow for device connection to a host when in device mode, or for device enumeration while in + * host mode. + * + * As the USB library relies on interrupts for the device and host mode enumeration processes, + * the user must enable global interrupts before or shortly after this function is called. In + * device mode, interrupts must be enabled within 500ms of this function being called to ensure + * that the host does not time out whilst enumerating the device. In host mode, interrupts may be + * enabled at the application's leisure however enumeration will not begin of an attached device + * until after this has occurred. + * + * Calling this function when the USB interface is already initialized will cause a complete USB + * interface reset and re-enumeration. + * + * \param[in] Mode Mask indicating what mode the USB interface is to be initialized to, a value + * from the \ref USB_Modes_t enum. + * \note This parameter does not exist on devices with only one supported USB + * mode (device or host). + * + * \param[in] Options Mask indicating the options which should be used when initializing the USB + * interface to control the USB interface's behavior. This should be comprised of + * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the + * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device + * mode speed. + * + * \note To reduce the FLASH requirements of the library if only device or host mode is required, + * the mode can be statically set in the project makefile by defining the token \c USB_DEVICE_ONLY + * (for device mode) or \c USB_HOST_ONLY (for host mode), passing the token to the compiler + * via the -D switch. If the mode is statically set, this parameter does not exist in the + * function prototype. + * \n\n + * + * \note To reduce the FLASH requirements of the library if only fixed settings are required, + * the options may be set statically in the same manner as the mode (see the Mode parameter of + * this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token, + * defined to the appropriate options masks. When the options are statically set, this + * parameter does not exist in the function prototype. + * \n\n + * + * \note The mode parameter does not exist on devices where only one mode is possible, such as USB + * AVR models which only implement the USB device mode in hardware. + * + * \see \ref Group_Device for the \c USB_DEVICE_OPT_* masks. + */ + void USB_Init( + #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) + const uint8_t Mode + #endif + + #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) || defined(__DOXYGEN__) + , + #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS)) + void + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + const uint8_t Options + #endif + ); + + /** Shuts down the USB interface. This turns off the USB interface after deallocating all USB FIFO + * memory, endpoints and pipes. When turned off, no USB functionality can be used until the interface + * is restarted with the \ref USB_Init() function. + */ + void USB_Disable(void); + + /** Resets the interface, when already initialized. This will re-enumerate the device if already connected + * to a host, or re-enumerate an already attached device when in host mode. + */ + void USB_ResetInterface(void); + + /* Global Variables: */ + #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) + /** Indicates the mode that the USB interface is currently initialized to, a value from the + * \ref USB_Modes_t enum. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + * + * \note When the controller is initialized into UID auto-detection mode, this variable will hold the + * currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller + * is fixed into a specific mode (either through the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY compile time + * options, or a limitation of the USB controller in the chosen device model) this will evaluate to + * a constant of the appropriate value and will never evaluate to \ref USB_MODE_None even when the + * USB interface is not initialized. + */ + extern volatile uint8_t USB_CurrentMode; + #elif defined(USB_CAN_BE_HOST) + #define USB_CurrentMode USB_MODE_Host + #elif defined(USB_CAN_BE_DEVICE) + #define USB_CurrentMode USB_MODE_Device + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + /** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init() + * was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module. + * + * \attention This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + extern volatile uint8_t USB_Options; + #elif defined(USE_STATIC_OPTIONS) + #define USB_Options USE_STATIC_OPTIONS + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_USB_CONTROLLER_C) + static void USB_Init_Device(void); + #endif + + /* Inline Functions: */ + static inline void USB_Controller_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Enable(void) + { + USB.CTRLA |= USB_ENABLE_bm; + } + + static inline void USB_Controller_Disable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Disable(void) + { + USB.CTRLA &= ~USB_ENABLE_bm; + } + + static inline void USB_Controller_Reset(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Reset(void) + { + USB.CTRLA &= ~USB_ENABLE_bm; + USB.CTRLA |= USB_ENABLE_bm; + } + + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c new file mode 100644 index 0000000000..a82dde030c --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c @@ -0,0 +1,106 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "../../../../Common/Common.h" +#if (ARCH == ARCH_XMEGA) + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBInterrupt.h" + +void USB_INT_DisableAllInterrupts(void) +{ + USB.INTCTRLA &= USB_INTLVL_gm; + USB.INTCTRLB = 0; +} + +void USB_INT_ClearAllInterrupts(void) +{ + USB.INTFLAGSACLR = 0xFF; + USB.INTFLAGSBCLR = 0xFF; +} + +ISR(USB_BUSEVENT_vect) +{ + #if !defined(NO_SOF_EVENTS) + if (USB_INT_HasOccurred(USB_INT_SOFI) && USB_INT_IsEnabled(USB_INT_SOFI)) + { + USB_INT_Clear(USB_INT_SOFI); + + EVENT_USB_Device_StartOfFrame(); + } + #endif + + if (USB_INT_HasOccurred(USB_INT_BUSEVENTI_Suspend)) + { + USB_INT_Clear(USB_INT_BUSEVENTI_Suspend); + + #if !defined(NO_LIMITED_CONTROLLER_CONNECT) + USB_DeviceState = DEVICE_STATE_Unattached; + EVENT_USB_Device_Disconnect(); + #else + USB_DeviceState = DEVICE_STATE_Suspended; + EVENT_USB_Device_Suspend(); + #endif + } + + if (USB_INT_HasOccurred(USB_INT_BUSEVENTI_Resume)) + { + USB_INT_Clear(USB_INT_BUSEVENTI_Resume); + + if (USB_Device_ConfigurationNumber) + USB_DeviceState = DEVICE_STATE_Configured; + else + USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Addressed : DEVICE_STATE_Powered; + + #if !defined(NO_LIMITED_CONTROLLER_CONNECT) + EVENT_USB_Device_Connect(); + #else + EVENT_USB_Device_WakeUp(); + #endif + } + + if (USB_INT_HasOccurred(USB_INT_BUSEVENTI_Reset)) + { + USB_INT_Clear(USB_INT_BUSEVENTI_Reset); + + USB_DeviceState = DEVICE_STATE_Default; + USB_Device_ConfigurationNumber = 0; + + USB_Device_EnableDeviceAddress(0); + + Endpoint_ClearEndpoints(); + Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, + USB_Device_ControlEndpointSize, 1); + + EVENT_USB_Device_Reset(); + } +} + +#endif diff --git a/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h new file mode 100644 index 0000000000..54ee7f115f --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h @@ -0,0 +1,172 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB Controller Interrupt definitions for the AVR XMEGA microcontrollers. + * + * This file contains definitions required for the correct handling of low level USB service routine interrupts + * from the USB controller. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +#ifndef __USBINTERRUPT_XMEGA_H__ +#define __USBINTERRUPT_XMEGA_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Enums: */ + enum USB_Interrupts_t + { + USB_INT_BUSEVENTI = 1, + USB_INT_BUSEVENTI_Suspend = 2, + USB_INT_BUSEVENTI_Resume = 3, + USB_INT_BUSEVENTI_Reset = 4, + USB_INT_SOFI = 5, + }; + + /* Inline Functions: */ + static inline void USB_INT_Enable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE; + static inline void USB_INT_Enable(const uint8_t Interrupt) + { + switch (Interrupt) + { + case USB_INT_BUSEVENTI: + USB.INTCTRLA |= USB_BUSEVIE_bm; + break; + case USB_INT_SOFI: + USB.INTCTRLA |= USB_SOFIE_bm; + break; + default: + break; + } + } + + static inline void USB_INT_Disable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE; + static inline void USB_INT_Disable(const uint8_t Interrupt) + { + switch (Interrupt) + { + case USB_INT_BUSEVENTI: + USB.INTCTRLA &= ~USB_BUSEVIE_bm; + break; + case USB_INT_SOFI: + USB.INTCTRLA &= ~USB_SOFIE_bm; + break; + default: + break; + } + } + + static inline void USB_INT_Clear(const uint8_t Interrupt) ATTR_ALWAYS_INLINE; + static inline void USB_INT_Clear(const uint8_t Interrupt) + { + switch (Interrupt) + { + case USB_INT_BUSEVENTI_Suspend: + USB.INTFLAGSACLR = USB_SUSPENDIF_bm; + break; + case USB_INT_BUSEVENTI_Resume: + USB.INTFLAGSACLR = USB_RESUMEIF_bm; + break; + case USB_INT_BUSEVENTI_Reset: + USB.INTFLAGSACLR = USB_RSTIF_bm; + break; + case USB_INT_SOFI: + USB.INTFLAGSACLR = USB_SOFIF_bm; + break; + default: + break; + } + } + + static inline bool USB_INT_IsEnabled(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline bool USB_INT_IsEnabled(const uint8_t Interrupt) + { + switch (Interrupt) + { + case USB_INT_BUSEVENTI: + return ((USB.INTCTRLA & USB_BUSEVIE_bm) ? true : false); + case USB_INT_SOFI: + return ((USB.INTCTRLA & USB_SOFIE_bm) ? true : false); + default: + return false; + } + } + + static inline bool USB_INT_HasOccurred(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline bool USB_INT_HasOccurred(const uint8_t Interrupt) + { + switch (Interrupt) + { + case USB_INT_BUSEVENTI_Suspend: + return ((USB.INTFLAGSACLR & USB_SUSPENDIF_bm) ? true : false); + case USB_INT_BUSEVENTI_Resume: + return ((USB.INTFLAGSACLR & USB_RESUMEIF_bm) ? true : false); + case USB_INT_BUSEVENTI_Reset: + return ((USB.INTFLAGSACLR & USB_RSTIF_bm) ? true : false); + case USB_INT_SOFI: + return ((USB.INTFLAGSACLR & USB_SOFIF_bm) ? true : false); + default: + return false; + } + } + + /* Includes: */ + #include "../USBMode.h" + #include "../Events.h" + #include "../USBController.h" + + /* Function Prototypes: */ + void USB_INT_ClearAllInterrupts(void); + void USB_INT_DisableAllInterrupts(void); + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + |