diff options
Diffstat (limited to 'lib/lufa/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h')
| -rw-r--r-- | lib/lufa/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h | 317 |
1 files changed, 0 insertions, 317 deletions
diff --git a/lib/lufa/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h b/lib/lufa/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h deleted file mode 100644 index ababdb09a6..0000000000 --- a/lib/lufa/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h +++ /dev/null @@ -1,317 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Host mode driver for the library USB Still Image Class driver. - * - * Host mode driver for the library USB Still Image Class driver. - * - * \note This file should not be included directly. It is automatically included as needed by the USB module driver - * dispatch header located in LUFA/Drivers/USB.h. - */ - -/** \ingroup Group_USBClassSI - * \defgroup Group_USBClassStillImageHost Still Image Class Host Mode Driver - * - * \section Sec_USBClassStillImageHost_Dependencies Module Source Dependencies - * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Host/StillImageClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i> - * - * \section Sec_USBClassStillImageHost_ModDescription Module Description - * Host Mode USB Class driver framework interface, for the Still Image USB Class driver. - * - * @{ - */ - -#ifndef __SI_CLASS_HOST_H__ -#define __SI_CLASS_HOST_H__ - - /* Includes: */ - #include "../../USB.h" - #include "../Common/StillImageClassCommon.h" - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_SI_DRIVER) - #error Do not include this file directly. Include LUFA/Drivers/USB.h instead. - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** Error code for some Still Image Host functions, indicating a logical (and not hardware) error. */ - #define SI_ERROR_LOGICAL_CMD_FAILED 0x80 - - /* Type Defines: */ - /** \brief Still Image Class Host Mode Configuration and State Structure. - * - * Class state structure. An instance of this structure should be made within the user application, - * and passed to each of the Still Image class driver functions as the \c SIInterfaceInfo parameter. This - * stores each Still Image interface's configuration and state information. - */ - typedef struct - { - struct - { - USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ - USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ - USB_Pipe_Table_t EventsPipe; /**< Event notification IN Pipe configuration table. */ - } Config; /**< Config data for the USB class interface within the device. All elements in this section - * <b>must</b> be set or the interface will fail to enumerate and operate correctly. - */ - struct - { - bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid - * after \ref SI_Host_ConfigurePipes() is called and the Host state machine is in the - * Configured state. - */ - uint8_t InterfaceNumber; /**< Interface index of the Still Image interface within the attached device. */ - - bool IsSessionOpen; /**< Indicates if a PIMA session is currently open with the attached device. */ - uint32_t TransactionID; /**< Transaction ID for the next transaction to send to the device. */ - } State; /**< State data for the USB class interface within the device. All elements in this section - * <b>may</b> be set to initial values, but may also be ignored to default to sane values when - * the interface is enumerated. - */ - } USB_ClassInfo_SI_Host_t; - - /* Enums: */ - /** Enum for the possible error codes returned by the \ref SI_Host_ConfigurePipes() function. */ - enum SI_Host_EnumerationFailure_ErrorCodes_t - { - SI_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */ - SI_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */ - SI_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible Still Image interface was not found in the device's - * Configuration Descriptor. - */ - SI_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */ - }; - - /* Function Prototypes: */ - /** Host interface configuration routine, to configure a given Still Image host interface instance using the - * Configuration Descriptor read from an attached USB device. This function automatically updates the given Still - * Image Host instance's state values and configures the pipes required to communicate with the interface if it is - * found within the device. This should be called once after the stack has enumerated the attached device, while - * the host state machine is in the Addressed state. - * - * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state. - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. - * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor. - * - * \return A value from the \ref SI_Host_EnumerationFailure_ErrorCodes_t enum. - */ - uint8_t SI_Host_ConfigurePipes(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, - uint16_t ConfigDescriptorSize, - void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); - - /** Opens a new PIMA session with the attached device. This should be used before any session-orientated PIMA commands - * are issued to the device. Only one session can be open at the one time. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state. - * - * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device - * returned a logical command failure. - */ - uint8_t SI_Host_OpenSession(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - - /** Closes an already opened PIMA session with the attached device. This should be used after all session-orientated - * PIMA commands have been issued to the device. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state. - * - * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device - * returned a logical command failure. - */ - uint8_t SI_Host_CloseSession(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - - /** Sends a raw PIMA block header to the device, filling out the transaction ID automatically. This can be used to send - * arbitrary PIMA blocks to the device with or without parameters. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state. - * \param[in] PIMAHeader Pointer to a PIMA container structure that is to be sent. - * - * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. - */ - uint8_t SI_Host_SendBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, - PIMA_Container_t* const PIMAHeader) ATTR_NON_NULL_PTR_ARG(1) - ATTR_NON_NULL_PTR_ARG(2); - - /** Receives a raw PIMA block header from the device. This can be used to receive arbitrary PIMA blocks from the device with - * or without parameters. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state. - * \param[out] PIMAHeader Pointer to a PIMA container structure where the received block is to be stored. - * - * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. - */ - uint8_t SI_Host_ReceiveBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, - PIMA_Container_t* const PIMAHeader) ATTR_NON_NULL_PTR_ARG(1) - ATTR_NON_NULL_PTR_ARG(2); - - /** Sends a given PIMA command to the attached device, filling out the PIMA command header's Transaction ID automatically. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state. - * \param[in] Operation PIMA operation code to issue to the device. - * \param[in] TotalParams Total number of 32-bit parameters to send to the device in the issued command block. - * \param[in] Params Pointer to an array of 32-bit values containing the parameters to send in the command block. - * - * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device - * returned a logical command failure. - */ - uint8_t SI_Host_SendCommand(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, - const uint16_t Operation, - const uint8_t TotalParams, - uint32_t* const Params) ATTR_NON_NULL_PTR_ARG(1); - - /** Receives and checks a response block from the attached Still Image device, once a command has been issued and all data - * associated with the command has been transferred. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state. - * - * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device - * returned a logical command failure. - */ - uint8_t SI_Host_ReceiveResponse(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - - /** Indicates if the device has issued a PIMA event block to the host via the asynchronous events pipe. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state. - * - * \return Boolean \c true if an event is waiting to be read, \c false otherwise. - */ - bool SI_Host_IsEventReceived(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - - /** Receives an asynchronous event block from the device via the asynchronous events pipe. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state. - * \param[out] PIMAHeader Pointer to a PIMA container structure where the event should be stored. - * - * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device - * returned a logical command failure. - */ - uint8_t SI_Host_ReceiveEventHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, - PIMA_Container_t* const PIMAHeader) ATTR_NON_NULL_PTR_ARG(1) - ATTR_NON_NULL_PTR_ARG(2); - - /** Sends arbitrary data to the attached device, for use in the data phase of PIMA commands which require data - * transfer beyond the regular PIMA command block parameters. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state. - * \param[in] Buffer Pointer to a buffer where the data to send has been stored. - * \param[in] Bytes Length in bytes of the data in the buffer to send to the attached device. - * - * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. - */ - uint8_t SI_Host_SendData(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, - const void* Buffer, - const uint16_t Bytes) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); - - /** Receives arbitrary data from the attached device, for use in the data phase of PIMA commands which require data - * transfer beyond the regular PIMA command block parameters. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state. - * \param[out] Buffer Pointer to a buffer where the received data is to be stored. - * \param[in] Bytes Length in bytes of the data to read. - * - * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. - */ - uint8_t SI_Host_ReadData(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, - void* Buffer, - const uint16_t Bytes) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); - - /* Inline Functions: */ - /** General management task for a given Still Image host class interface, required for the correct operation of the - * interface. This should be called frequently in the main program loop, before the master USB management task - * \ref USB_USBTask(). - * - * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state. - */ - static inline void SI_Host_USBTask(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE; - static inline void SI_Host_USBTask(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) - { - (void)SIInterfaceInfo; - } - - /* Private Interface - For use in library only: */ - #if !defined(__DOXYGEN__) - /* Macros: */ - #define SI_COMMAND_DATA_TIMEOUT_MS 10000 - - /* Function Prototypes: */ - #if defined(__INCLUDE_FROM_STILLIMAGE_HOST_C) - static uint8_t DCOMP_SI_Host_NextSIInterface(void* const CurrentDescriptor) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); - static uint8_t DCOMP_SI_Host_NextSIInterfaceEndpoint(void* const CurrentDescriptor) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); - #endif - #endif - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - -/** @} */ - |