diff options
Diffstat (limited to 'keyboards')
352 files changed, 373 insertions, 373 deletions
diff --git a/keyboards/0xc7/61key/readme.md b/keyboards/0xc7/61key/readme.md index 356b8b07d4..0947aaa52c 100644 --- a/keyboards/0xc7/61key/readme.md +++ b/keyboards/0xc7/61key/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/1upkeyboards/super16v2/readme.md b/keyboards/1upkeyboards/super16v2/readme.md index b2c0ca747b..f1b8cbaf5d 100644 --- a/keyboards/1upkeyboards/super16v2/readme.md +++ b/keyboards/1upkeyboards/super16v2/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/40percentclub/polyandry/readme.md b/keyboards/40percentclub/polyandry/readme.md index b6acf3cd7f..6162bea7a3 100644 --- a/keyboards/40percentclub/polyandry/readme.md +++ b/keyboards/40percentclub/polyandry/readme.md @@ -48,6 +48,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key of the keyboard (top right or bottom left in horizontal configuration) * **Physical reset**: Briefly press the button on the bottom of the microcontroller or, if not present short the pin marked RST to a GND. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/a_dux/readme.md b/keyboards/a_dux/readme.md index f709542b31..2fca2d424f 100644 --- a/keyboards/a_dux/readme.md +++ b/keyboards/a_dux/readme.md @@ -41,5 +41,5 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side. * **Physical reset pins**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material. -* **Keycode in layout**: Press the key mapped to `RESET` if it is configured. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured. diff --git a/keyboards/acheron/apollo/readme.md b/keyboards/acheron/apollo/readme.md index 67854611dc..701378b64e 100644 --- a/keyboards/acheron/apollo/readme.md +++ b/keyboards/acheron/apollo/readme.md @@ -24,7 +24,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the physical button on the back of the PCB for at least five seconds -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ### Step 2: compile firmware diff --git a/keyboards/acheron/elongate/beta/readme.md b/keyboards/acheron/elongate/beta/readme.md index 8a8949fdfe..d4298254b5 100755 --- a/keyboards/acheron/elongate/beta/readme.md +++ b/keyboards/acheron/elongate/beta/readme.md @@ -20,7 +20,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the front of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. ## Compile firmware diff --git a/keyboards/acheron/elongate/delta/readme.md b/keyboards/acheron/elongate/delta/readme.md index 055b02ee04..7300b8aa64 100755 --- a/keyboards/acheron/elongate/delta/readme.md +++ b/keyboards/acheron/elongate/delta/readme.md @@ -20,7 +20,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (escape key at layer 2 in the default firmware) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (escape key at layer 2 in the default firmware) ## Compile firmware diff --git a/keyboards/acheron/shark/readme.md b/keyboards/acheron/shark/readme.md index d805571ebb..f3ae43ac47 100644 --- a/keyboards/acheron/shark/readme.md +++ b/keyboards/acheron/shark/readme.md @@ -17,7 +17,7 @@ The DFU state in the bootloader can be accessed in 2 ways: * **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the back of the PCB -* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ### Release Beta: @@ -25,7 +25,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the back of the PCB, for at least five seconds -* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ## Compile firmware diff --git a/keyboards/ada/ada1800mini/readme.md b/keyboards/ada/ada1800mini/readme.md index ad323114a6..561dbd99a9 100644 --- a/keyboards/ada/ada1800mini/readme.md +++ b/keyboards/ada/ada1800mini/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/ada/infinity81/readme.md b/keyboards/ada/infinity81/readme.md index a134379ce5..f44d762cb7 100644 --- a/keyboards/ada/infinity81/readme.md +++ b/keyboards/ada/infinity81/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/adm42/readme.md b/keyboards/adm42/readme.md index 1affc11628..a767e8a70b 100644 --- a/keyboards/adm42/readme.md +++ b/keyboards/adm42/readme.md @@ -22,6 +22,6 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB diff --git a/keyboards/adpenrose/kintsugi/readme.md b/keyboards/adpenrose/kintsugi/readme.md index 2aa402543e..708dc16699 100644 --- a/keyboards/adpenrose/kintsugi/readme.md +++ b/keyboards/adpenrose/kintsugi/readme.md @@ -34,4 +34,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the front of the Elite-C microcontroller _**before soldering**_ it to the PCB- some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/ai03/jp60/readme.md b/keyboards/ai03/jp60/readme.md index 25a3b16413..d5dbd669fd 100644 --- a/keyboards/ai03/jp60/readme.md +++ b/keyboards/ai03/jp60/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/akb/ogr/readme.md b/keyboards/akb/ogr/readme.md index 667963bce0..e9b01e958c 100644 --- a/keyboards/akb/ogr/readme.md +++ b/keyboards/akb/ogr/readme.md @@ -26,4 +26,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/akb/ogrn/readme.md b/keyboards/akb/ogrn/readme.md index 16d60538c7..fc55da54f8 100644 --- a/keyboards/akb/ogrn/readme.md +++ b/keyboards/akb/ogrn/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/alt34/readme.md b/keyboards/alt34/readme.md index 14c1e28c7a..59e8365c51 100644 --- a/keyboards/alt34/readme.md +++ b/keyboards/alt34/readme.md @@ -24,7 +24,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset jumper**: Briefly short the pads just below the TRRS connector on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Latest updates and information for alt34 is found at https://gitlab.com/altosys/alt34 diff --git a/keyboards/amjkeyboard/amj84/readme.md b/keyboards/amjkeyboard/amj84/readme.md index c0df110eb0..d1cc03a7f4 100644 --- a/keyboards/amjkeyboard/amj84/readme.md +++ b/keyboards/amjkeyboard/amj84/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/ano/readme.md b/keyboards/ano/readme.md index cc879d77b5..594d4bc69c 100644 --- a/keyboards/ano/readme.md +++ b/keyboards/ano/readme.md @@ -17,4 +17,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * Physical reset button: Briefly press the button on the back of the PCB - or short reset and ground pins -* Keycode in layout: Press the key mapped to `RESET`. By default this is done by pressing RALT to access second layer and pressing rotary encoder down.
\ No newline at end of file +* Keycode in layout: Press the key mapped to `QK_BOOT`. By default this is done by pressing RALT to access second layer and pressing rotary encoder down.
\ No newline at end of file diff --git a/keyboards/atlantis/ak81_ve/readme.md b/keyboards/atlantis/ak81_ve/readme.md index d9a6f9627c..ab1fee5a48 100644 --- a/keyboards/atlantis/ak81_ve/readme.md +++ b/keyboards/atlantis/ak81_ve/readme.md @@ -17,7 +17,7 @@ Make example for this keyboard (after setting up your build environment): Enter the bootloader in 2 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Physical reset pins**: Briefly short the reset pins using tweezers, a paperclip, or any other conductive material. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/atlas_65/readme.md b/keyboards/atlas_65/readme.md index 40eebba6f4..398024cbf0 100644 --- a/keyboards/atlas_65/readme.md +++ b/keyboards/atlas_65/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/atreyu/readme.md b/keyboards/atreyu/readme.md index 877e8788d2..1de288ea88 100644 --- a/keyboards/atreyu/readme.md +++ b/keyboards/atreyu/readme.md @@ -22,7 +22,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## More information diff --git a/keyboards/atset/at1/readme.md b/keyboards/atset/at1/readme.md index 90a56dba30..330c1b2ff8 100644 --- a/keyboards/atset/at1/readme.md +++ b/keyboards/atset/at1/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file diff --git a/keyboards/atset/at12/readme.md b/keyboards/atset/at12/readme.md index 2ddd93046d..6760e33ab5 100644 --- a/keyboards/atset/at12/readme.md +++ b/keyboards/atset/at12/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file diff --git a/keyboards/atset/at16/readme.md b/keyboards/atset/at16/readme.md index 6667a1a187..00dba767dc 100644 --- a/keyboards/atset/at16/readme.md +++ b/keyboards/atset/at16/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/atset/at3/readme.md b/keyboards/atset/at3/readme.md index f33bda8df3..755169c5d6 100644 --- a/keyboards/atset/at3/readme.md +++ b/keyboards/atset/at3/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file diff --git a/keyboards/atset/at6/readme.md b/keyboards/atset/at6/readme.md index f5ec383530..84abbf87a5 100644 --- a/keyboards/atset/at6/readme.md +++ b/keyboards/atset/at6/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/atset/at9/readme.md b/keyboards/atset/at9/readme.md index d59b1e2f4d..d1d38ba6c6 100644 --- a/keyboards/atset/at9/readme.md +++ b/keyboards/atset/at9/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/aves60/readme.md b/keyboards/aves60/readme.md index 5a96d2b2eb..049d2d99d8 100644 --- a/keyboards/aves60/readme.md +++ b/keyboards/aves60/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the space bar and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/axolstudio/foundation_gamma/readme.md b/keyboards/axolstudio/foundation_gamma/readme.md index 522ddd16c6..5736a0c1d3 100644 --- a/keyboards/axolstudio/foundation_gamma/readme.md +++ b/keyboards/axolstudio/foundation_gamma/readme.md @@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Briefly press the button labeled "SW1" on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/axolstudio/yeti/hotswap/readme.md b/keyboards/axolstudio/yeti/hotswap/readme.md index 79fad346f3..4421847705 100644 --- a/keyboards/axolstudio/yeti/hotswap/readme.md +++ b/keyboards/axolstudio/yeti/hotswap/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/axolstudio/yeti/soldered/readme.md b/keyboards/axolstudio/yeti/soldered/readme.md index 78ca4d5deb..429cc7ce9a 100644 --- a/keyboards/axolstudio/yeti/soldered/readme.md +++ b/keyboards/axolstudio/yeti/soldered/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/bacca70/readme.md b/keyboards/bacca70/readme.md index 2141138b8f..8c79edd494 100644 --- a/keyboards/bacca70/readme.md +++ b/keyboards/bacca70/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key (Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB. The button is next to the MCU. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. For the default keymap it is on the right alt key on the second layer. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. For the default keymap it is on the right alt key on the second layer. ## Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/bajjak/readme.md b/keyboards/bajjak/readme.md index 7e86d0243d..4b05c74f0a 100644 --- a/keyboards/bajjak/readme.md +++ b/keyboards/bajjak/readme.md @@ -18,6 +18,6 @@ Flashing example for this keyboard: Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bbrfkr/dynamis/readme.md b/keyboards/bbrfkr/dynamis/readme.md index 6806819bb1..1db398f08b 100644 --- a/keyboards/bbrfkr/dynamis/readme.md +++ b/keyboards/bbrfkr/dynamis/readme.md @@ -14,7 +14,7 @@ Gasket mounted 65% row staggered keyboard integrated a trackball Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## build and flash firmware diff --git a/keyboards/bioi/f60/readme.md b/keyboards/bioi/f60/readme.md index 6a120acded..9b5c8e8591 100644 --- a/keyboards/bioi/f60/readme.md +++ b/keyboards/bioi/f60/readme.md @@ -21,5 +21,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Bootmagic reset**: Hold down the top left key (ESC) and plug in the keyboard -* **Physical reset button**: Short the two small pads labeled "RESET" the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Physical reset button**: Short the two small pads labeled "QK_BOOT" the back of the PCB +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/blank/blank01/readme.md b/keyboards/blank/blank01/readme.md index 059bb2c8dc..66c2fa8ded 100644 --- a/keyboards/blank/blank01/readme.md +++ b/keyboards/blank/blank01/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/blaster75/readme.md b/keyboards/blaster75/readme.md index 1a03ec5a9f..851db670ad 100644 --- a/keyboards/blaster75/readme.md +++ b/keyboards/blaster75/readme.md @@ -18,7 +18,7 @@ We strongly recommend this method. If the PCB is not soldered with switches at t to short the (0,0) position key ("ESC" in our PCB) while plugging the USB in. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/blockboy/ac980mini/readme.md b/keyboards/blockboy/ac980mini/readme.md index 662f7b79a8..6eef032b7f 100644 --- a/keyboards/blockboy/ac980mini/readme.md +++ b/keyboards/blockboy/ac980mini/readme.md @@ -26,4 +26,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/bobpad/readme.md b/keyboards/bobpad/readme.md index 776ef58e47..75e6e03202 100644 --- a/keyboards/bobpad/readme.md +++ b/keyboards/bobpad/readme.md @@ -19,7 +19,7 @@ Flashing example for this keyboard: ## Bootloader Enter the bootloader in 3 ways: -* **Physical reset button**: Briefly short the pad connected to RESET and GND on the back -* **Keycode in layout**: Press the key mapped to `RESET`, this is the recommened method +* **Physical reset button**: Briefly short the pad connected to QK_BOOT and GND on the back +* **Keycode in layout**: Press the key mapped to `QK_BOOT`, this is the recommened method See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bpiphany/ghost_squid/readme.md b/keyboards/bpiphany/ghost_squid/readme.md index ab39e0f725..2b2e838cbc 100644 --- a/keyboards/bpiphany/ghost_squid/readme.md +++ b/keyboards/bpiphany/ghost_squid/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/cablecardesigns/cypher/rev6/readme.md b/keyboards/cablecardesigns/cypher/rev6/readme.md index 13016e86a1..65e87175cf 100644 --- a/keyboards/cablecardesigns/cypher/rev6/readme.md +++ b/keyboards/cablecardesigns/cypher/rev6/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: There are 2 holes underneath the spacebar position that if shorted will enter bootloader -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cannonkeys/brutalv2_65/readme.md b/keyboards/cannonkeys/brutalv2_65/readme.md index fe09c9ecec..52d0649ce1 100644 --- a/keyboards/cannonkeys/brutalv2_65/readme.md +++ b/keyboards/cannonkeys/brutalv2_65/readme.md @@ -17,4 +17,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cannonkeys/cloudline/readme.md b/keyboards/cannonkeys/cloudline/readme.md index ddd15a05a5..af619fe6a5 100644 --- a/keyboards/cannonkeys/cloudline/readme.md +++ b/keyboards/cannonkeys/cloudline/readme.md @@ -17,4 +17,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cannonkeys/crin/readme.md b/keyboards/cannonkeys/crin/readme.md index 2da8bd6bcc..d81550d023 100644 --- a/keyboards/cannonkeys/crin/readme.md +++ b/keyboards/cannonkeys/crin/readme.md @@ -15,4 +15,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cannonkeys/gentoo/readme.md b/keyboards/cannonkeys/gentoo/readme.md index 1b852a614b..51e7eb96f3 100644 --- a/keyboards/cannonkeys/gentoo/readme.md +++ b/keyboards/cannonkeys/gentoo/readme.md @@ -17,4 +17,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cannonkeys/gentoo_hs/readme.md b/keyboards/cannonkeys/gentoo_hs/readme.md index fa99daec2f..8c3de2effa 100644 --- a/keyboards/cannonkeys/gentoo_hs/readme.md +++ b/keyboards/cannonkeys/gentoo_hs/readme.md @@ -17,4 +17,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cannonkeys/hoodrowg/readme.md b/keyboards/cannonkeys/hoodrowg/readme.md index e5baab539a..67265e05af 100644 --- a/keyboards/cannonkeys/hoodrowg/readme.md +++ b/keyboards/cannonkeys/hoodrowg/readme.md @@ -15,7 +15,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cantor/readme.md b/keyboards/cantor/readme.md index 90045eb2be..9a45d7befc 100644 --- a/keyboards/cantor/readme.md +++ b/keyboards/cantor/readme.md @@ -27,4 +27,4 @@ Enter the bootloader in 3 ways: * Press and hold the BOOT0 button. * Press and release the NRST button. * Release the BOOT0 button. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/chalice/readme.md b/keyboards/chalice/readme.md index ebfaa3cbd1..2c076e5afc 100644 --- a/keyboards/chalice/readme.md +++ b/keyboards/chalice/readme.md @@ -20,6 +20,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down Escape and plug in the keyboard. * **Physical reset button**: Briefly press the reset button below the pro-micro. -* **Keycode in layout**: The `RESET` key can be found by holding `FUNC` in between the space bars and pressing `ESC`. +* **Keycode in layout**: The `QK_BOOT` key can be found by holding `FUNC` in between the space bars and pressing `ESC`. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/chaos65/readme.md b/keyboards/chaos65/readme.md index 4337ecf90a..62d6e4a40e 100644 --- a/keyboards/chaos65/readme.md +++ b/keyboards/chaos65/readme.md @@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Briefly press the button labeled "Reset" on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/charue/charon/readme.md b/keyboards/charue/charon/readme.md index 1732d8a018..9c2afd641b 100644 --- a/keyboards/charue/charon/readme.md +++ b/keyboards/charue/charon/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/charue/sunsetter_r2/readme.md b/keyboards/charue/sunsetter_r2/readme.md index 8bfa046a93..d5e34beec9 100644 --- a/keyboards/charue/sunsetter_r2/readme.md +++ b/keyboards/charue/sunsetter_r2/readme.md @@ -28,4 +28,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cipulot/kallos/readme.md b/keyboards/cipulot/kallos/readme.md index 16921fbb42..6d1341735c 100644 --- a/keyboards/cipulot/kallos/readme.md +++ b/keyboards/cipulot/kallos/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Briefly short the pads labeled "Reset" on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cipulot/kawayo/readme.md b/keyboards/cipulot/kawayo/readme.md index 99c26c6f8c..53e01faaa5 100644 --- a/keyboards/cipulot/kawayo/readme.md +++ b/keyboards/cipulot/kawayo/readme.md @@ -26,4 +26,4 @@ Enter the bootloader in 2 ways: * **Physical reset button**: Power up the board while having the `Reset/Boot0` pad shorted. -* **Keycode in layout**: Press the `GRV` key on layer 1 which is mapped to `RESET` +* **Keycode in layout**: Press the `GRV` key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/ckeys/handwire_101/readme.md b/keyboards/ckeys/handwire_101/readme.md index cf20dab60b..281fbddc7c 100755 --- a/keyboards/ckeys/handwire_101/readme.md +++ b/keyboards/ckeys/handwire_101/readme.md @@ -139,7 +139,7 @@ This layer is not currently working but has been left as an example of how to wr ``` /* ADMIN * ,-----------------------------------------. - * | RESET | | | X | + * | QK_BOOT | | | X | * |------------+-----+-----------+----------| * |ABOUT CKEYS | | | | * |------------+-----+-----------+----------| @@ -150,7 +150,7 @@ This layer is not currently working but has been left as an example of how to wr */ ``` -The most important key in this layer is the `RESET` switch. Use it to flash new firmware. It does the same thing as the hardware button on the Proton C. But since you soldered the Proton C with the reset button facing towards the keys, the only way to reach it is to de-solder wires. The reset switch solves this. Program a reset switch into all of your future keyboards. +The most important key in this layer is the `QK_BOOT` switch. Use it to flash new firmware. It does the same thing as the hardware button on the Proton C. But since you soldered the Proton C with the reset button facing towards the keys, the only way to reach it is to de-solder wires. The reset switch solves this. Program a reset switch into all of your future keyboards. The `ABOUT CKEYS` is another example of using a macro. It will type out a few sentences about cKeys. diff --git a/keyboards/coarse/ixora/readme.md b/keyboards/coarse/ixora/readme.md index a094bbd5e7..824e167ecd 100644 --- a/keyboards/coarse/ixora/readme.md +++ b/keyboards/coarse/ixora/readme.md @@ -18,5 +18,5 @@ See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) #### Developer's Note -STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `RESET` keycode nor using bootmagic or bootmagic lite. -The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `RESET` keycode). +STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `QK_BOOT` keycode nor using bootmagic or bootmagic lite. +The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `QK_BOOT` keycode). diff --git a/keyboards/coarse/vinta/readme.md b/keyboards/coarse/vinta/readme.md index 42291cd1fe..3c87101c46 100644 --- a/keyboards/coarse/vinta/readme.md +++ b/keyboards/coarse/vinta/readme.md @@ -18,5 +18,5 @@ See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) #### Developer's Note -STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `RESET` keycode nor using bootmagic or bootmagic lite. -The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `RESET` keycode). +STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `QK_BOOT` keycode nor using bootmagic or bootmagic lite. +The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `QK_BOOT` keycode). diff --git a/keyboards/contender/readme.md b/keyboards/contender/readme.md index 281ad4dabf..8a3fe08eaf 100644 --- a/keyboards/contender/readme.md +++ b/keyboards/contender/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/cradio/readme.md b/keyboards/cradio/readme.md index 7f3cef0969..0efbd88c18 100644 --- a/keyboards/cradio/readme.md +++ b/keyboards/cradio/readme.md @@ -24,7 +24,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: -* **Keycode in layout**: Press the key mapped to `RESET` if it is configured. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured. * **Physical reset button**: Briefly press the reset button soldered on the PCB. * **Bootmagic reset**: Hold down the top left key on the left half (or the top right key on the right half) and plug in the controller on that side. diff --git a/keyboards/creatkeebs/glacier/readme.md b/keyboards/creatkeebs/glacier/readme.md index 6901f93b27..0a38629863 100644 --- a/keyboards/creatkeebs/glacier/readme.md +++ b/keyboards/creatkeebs/glacier/readme.md @@ -16,8 +16,8 @@ A 80% keyboard Enter the bootloader in 2 ways: -* Physical reset button: Press the `RESET` button on the back of the PCB. -* Keycode in layout: Press the key mapped to `RESET` if it is available. +* Physical reset button: Press the `QK_BOOT` button on the back of the PCB. +* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available. ### Building the Firmware Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/creatkeebs/thera/readme.md b/keyboards/creatkeebs/thera/readme.md index a03f9c184e..2f78a154fd 100644 --- a/keyboards/creatkeebs/thera/readme.md +++ b/keyboards/creatkeebs/thera/readme.md @@ -18,8 +18,8 @@ A 75% keyboard Enter the bootloader in 2 ways: -* Physical reset button: Press the `RESET` button on the back of the PCB. -* Keycode in layout: Press the key mapped to `RESET` if it is available. +* Physical reset button: Press the `QK_BOOT` button on the back of the PCB. +* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available. ### Building the Firmware Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/crin/readme.md b/keyboards/crin/readme.md index 1912cee1f7..bc39ca6ac8 100644 --- a/keyboards/crin/readme.md +++ b/keyboards/crin/readme.md @@ -17,7 +17,7 @@ Flashing example for this keyboard: To reset the board into bootloader mode, do one of the following: * Hold Esc while plugging the PCB in, if Bootmagic Lite is enabled (also erases persistent settings). -* Press the RESET keycode, if programmed on the keymap (Fn+R by default). +* Press the `QK_BOOT` keycode, if programmed on the keymap (Fn+R by default). * Slide the switch just below the reset button to the left and press the reset button. * Please note that you must slide it back to the right for the PCB to boot QMK again. diff --git a/keyboards/dailycraft/bat43/readme.md b/keyboards/dailycraft/bat43/readme.md index 6b58aa5ca3..0331862290 100644 --- a/keyboards/dailycraft/bat43/readme.md +++ b/keyboards/dailycraft/bat43/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/claw44/readme.md b/keyboards/dailycraft/claw44/readme.md index e533bd7c82..9ff970fd72 100644 --- a/keyboards/dailycraft/claw44/readme.md +++ b/keyboards/dailycraft/claw44/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/owl8/readme.md b/keyboards/dailycraft/owl8/readme.md index c7fab17476..eccd990c60 100644 --- a/keyboards/dailycraft/owl8/readme.md +++ b/keyboards/dailycraft/owl8/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/sandbox/readme.md b/keyboards/dailycraft/sandbox/readme.md index 790deba95f..b7921566a3 100644 --- a/keyboards/dailycraft/sandbox/readme.md +++ b/keyboards/dailycraft/sandbox/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/stickey4/readme.md b/keyboards/dailycraft/stickey4/readme.md index e365407f82..35938c999f 100644 --- a/keyboards/dailycraft/stickey4/readme.md +++ b/keyboards/dailycraft/stickey4/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/wings42/readme.md b/keyboards/dailycraft/wings42/readme.md index c919653397..fa49ddfb3f 100644 --- a/keyboards/dailycraft/wings42/readme.md +++ b/keyboards/dailycraft/wings42/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/wings42/rev1/readme.md b/keyboards/dailycraft/wings42/rev1/readme.md index 959052c41d..2f3401a16b 100644 --- a/keyboards/dailycraft/wings42/rev1/readme.md +++ b/keyboards/dailycraft/wings42/rev1/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/wings42/rev1_extkeys/readme.md b/keyboards/dailycraft/wings42/rev1_extkeys/readme.md index 4a34063ad4..8ca8c140f7 100644 --- a/keyboards/dailycraft/wings42/rev1_extkeys/readme.md +++ b/keyboards/dailycraft/wings42/rev1_extkeys/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dailycraft/wings42/rev2/readme.md b/keyboards/dailycraft/wings42/rev2/readme.md index c919653397..fa49ddfb3f 100644 --- a/keyboards/dailycraft/wings42/rev2/readme.md +++ b/keyboards/dailycraft/wings42/rev2/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/demiurge/readme.md b/keyboards/demiurge/readme.md index 6e7845c8b4..b64d36f274 100644 --- a/keyboards/demiurge/readme.md +++ b/keyboards/demiurge/readme.md @@ -19,6 +19,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/dm9records/lain/readme.md b/keyboards/dm9records/lain/readme.md index 6eb216af61..4105c29371 100644 --- a/keyboards/dm9records/lain/readme.md +++ b/keyboards/dm9records/lain/readme.md @@ -29,4 +29,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/doio/kb16/readme.md b/keyboards/doio/kb16/readme.md index e83bfa67db..8667da41d5 100644 --- a/keyboards/doio/kb16/readme.md +++ b/keyboards/doio/kb16/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (1! key) and plug in the keyboard * **Physical reset button**: Short press the button under Spacebar keycap to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/drhigsby/packrat/readme.md b/keyboards/drhigsby/packrat/readme.md index 98b12543dc..f11feeec95 100644 --- a/keyboards/drhigsby/packrat/readme.md +++ b/keyboards/drhigsby/packrat/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dtisaac/cg108/readme.md b/keyboards/dtisaac/cg108/readme.md index 3bf38f7689..c454e0b877 100644 --- a/keyboards/dtisaac/cg108/readme.md +++ b/keyboards/dtisaac/cg108/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dtisaac/dosa40rgb/readme.md b/keyboards/dtisaac/dosa40rgb/readme.md index a2995a5c0f..30e549aa6e 100644 --- a/keyboards/dtisaac/dosa40rgb/readme.md +++ b/keyboards/dtisaac/dosa40rgb/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dyz/dyz40/readme.md b/keyboards/dyz/dyz40/readme.md index f73c4ef46c..537ccdda45 100644 --- a/keyboards/dyz/dyz40/readme.md +++ b/keyboards/dyz/dyz40/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: - **Bootmagic reset**: Hold the `Esc` key while plugging in the USB cable - **Physical reset button**: Briefly short the pins under the Enter key -- **Keycode in layout**: Press the key mapped to `RESET` if it is available +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dyz/dyz_tkl/readme.md b/keyboards/dyz/dyz_tkl/readme.md index 2de8105d24..a15eb48e2e 100644 --- a/keyboards/dyz/dyz_tkl/readme.md +++ b/keyboards/dyz/dyz_tkl/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: - **Bootmagic reset**: Hold the `Esc` key while plugging in the USB cable - **Physical reset button**: Briefly short the pins under the spacebar key -- **Keycode in layout**: Press the key mapped to `RESET` if it is available +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dyz/selka40/readme.md b/keyboards/dyz/selka40/readme.md index 6232d18a10..2117e248bc 100644 --- a/keyboards/dyz/selka40/readme.md +++ b/keyboards/dyz/selka40/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: - **Bootmagic reset**: Hold the `Esc` key while plugging in the USB cable - **Physical reset button**: Briefly press the button on the back of the PCB -- **Keycode in layout**: Press the key mapped to `RESET` if it is available +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/dztech/duo_s/readme.md b/keyboards/dztech/duo_s/readme.md index 7346663854..8bf5fa73c1 100644 --- a/keyboards/dztech/duo_s/readme.md +++ b/keyboards/dztech/duo_s/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: hold the button on the back of the PCB during plug in cable. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/dztech/dz64rgb/readme.md b/keyboards/dztech/dz64rgb/readme.md index 132a1710d7..cf1ff7b110 100644 --- a/keyboards/dztech/dz64rgb/readme.md +++ b/keyboards/dztech/dz64rgb/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/dztech/endless80/readme.md b/keyboards/dztech/endless80/readme.md index 58238afefe..18b813566c 100644 --- a/keyboards/dztech/endless80/readme.md +++ b/keyboards/dztech/endless80/readme.md @@ -15,4 +15,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down esc in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET`
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT`
\ No newline at end of file diff --git a/keyboards/eason/capsule65/readme.md b/keyboards/eason/capsule65/readme.md index 87576e34fa..5692cac027 100644 --- a/keyboards/eason/capsule65/readme.md +++ b/keyboards/eason/capsule65/readme.md @@ -14,4 +14,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down esc in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` +* **Keycode in layout**: Press the key mapped to `QK_BOOT` diff --git a/keyboards/ekow/akira/readme.md b/keyboards/ekow/akira/readme.md index e1a0c90366..62ec95acf4 100644 --- a/keyboards/ekow/akira/readme.md +++ b/keyboards/ekow/akira/readme.md @@ -20,5 +20,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the Buttom on the back of the PCB, the board will enter the dfu-mode, no extra pads need to short. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/elephant42/readme.md b/keyboards/elephant42/readme.md index 855ccda1e0..e6ceb5b17f 100644 --- a/keyboards/elephant42/readme.md +++ b/keyboards/elephant42/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/eternal_keypad/readme.md b/keyboards/eternal_keypad/readme.md index 196f51b31d..05c13bc516 100644 --- a/keyboards/eternal_keypad/readme.md +++ b/keyboards/eternal_keypad/readme.md @@ -23,5 +23,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,1) in the matrix (the top left key or Escape) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (activated by holding the lower right key and tapping the lower left key) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (activated by holding the lower right key and tapping the lower left key) * **Physical reset button**: Briefly sort the pads labeled "RST" and "GND" on the micro-controller diff --git a/keyboards/eu_isolation/readme.md b/keyboards/eu_isolation/readme.md index 711981ff02..c1272ea6a9 100644 --- a/keyboards/eu_isolation/readme.md +++ b/keyboards/eu_isolation/readme.md @@ -16,7 +16,7 @@ enters from you collection of keyboard kits. Enter the bootloader in 3 ways: * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Information diff --git a/keyboards/evyd13/fin_pad/readme.md b/keyboards/evyd13/fin_pad/readme.md index 4802caadec..bfeec8e449 100644 --- a/keyboards/evyd13/fin_pad/readme.md +++ b/keyboards/evyd13/fin_pad/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/evyd13/nt210/readme.md b/keyboards/evyd13/nt210/readme.md index b6b7bc940e..3a7117bcd1 100644 --- a/keyboards/evyd13/nt210/readme.md +++ b/keyboards/evyd13/nt210/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/evyd13/nt650/readme.md b/keyboards/evyd13/nt650/readme.md index b4684a94b6..ba2a967f32 100644 --- a/keyboards/evyd13/nt650/readme.md +++ b/keyboards/evyd13/nt650/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/eyeohdesigns/babyv/readme.md b/keyboards/eyeohdesigns/babyv/readme.md index 6a367f376d..b3b179aea7 100644 --- a/keyboards/eyeohdesigns/babyv/readme.md +++ b/keyboards/eyeohdesigns/babyv/readme.md @@ -16,6 +16,6 @@ Flashing example for this keyboard: make eyeohdesigns/babyv:default:flash -To enter the bootloader, either depress the reset button on the back of the PCB, or use the 'RESET' keycode found on the function layer. +To enter the bootloader, either depress the reset button on the back of the PCB, or use the `QK_BOOT` keycode found on the function layer. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/eyeohdesigns/sprh/readme.md b/keyboards/eyeohdesigns/sprh/readme.md index 59c5bce2c7..e4b7ced608 100644 --- a/keyboards/eyeohdesigns/sprh/readme.md +++ b/keyboards/eyeohdesigns/sprh/readme.md @@ -16,6 +16,6 @@ Flashing example for this keyboard: make eyeohdesigns/sprh:default:flash -To enter the bootloader, either depress the reset button on the back of the PCB, or use the 'RESET' keycode found on the function layer. +To enter the bootloader, either depress the reset button on the back of the PCB, or use the `QK_BOOT` keycode found on the function layer. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/eyeohdesigns/theboulevard/readme.md b/keyboards/eyeohdesigns/theboulevard/readme.md index c1f29becb7..bfe330ab21 100644 --- a/keyboards/eyeohdesigns/theboulevard/readme.md +++ b/keyboards/eyeohdesigns/theboulevard/readme.md @@ -16,6 +16,6 @@ Flashing example for this keyboard: make eyeohdesigns/theboulevard:default:flash -To enter the bootloader, either depress the reset button on the back of the PCB, or use the 'RESET' keycode found on the function layer. +To enter the bootloader, either depress the reset button on the back of the PCB, or use the `QK_BOOT` keycode found on the function layer. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/ferris/sweep/readme.md b/keyboards/ferris/sweep/readme.md index 332ab2c790..3fe690ab91 100644 --- a/keyboards/ferris/sweep/readme.md +++ b/keyboards/ferris/sweep/readme.md @@ -37,7 +37,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key on the left half (or the top right key on the right half) and plug in the controller on that side. * **Physical reset button**: Briefly press the reset button soldered on the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is configured. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured. ## Swapped Pins diff --git a/keyboards/ffkeebs/puca/readme.md b/keyboards/ffkeebs/puca/readme.md index ca4e0f93f9..bfd814e2b6 100644 --- a/keyboards/ffkeebs/puca/readme.md +++ b/keyboards/ffkeebs/puca/readme.md @@ -10,7 +10,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the encoder) * **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/fjlabs/tf60ansi/readme.md b/keyboards/fjlabs/tf60ansi/readme.md index 29cbad3fca..274db0c27e 100644 --- a/keyboards/fjlabs/tf60ansi/readme.md +++ b/keyboards/fjlabs/tf60ansi/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file diff --git a/keyboards/fjlabs/tf60v2/readme.md b/keyboards/fjlabs/tf60v2/readme.md index 22e624e68f..73b1473e2a 100644 --- a/keyboards/fjlabs/tf60v2/readme.md +++ b/keyboards/fjlabs/tf60v2/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file diff --git a/keyboards/fjlabs/tf65rgbv2/readme.md b/keyboards/fjlabs/tf65rgbv2/readme.md index 0aea9ef8fd..b46c40cbfe 100644 --- a/keyboards/fjlabs/tf65rgbv2/readme.md +++ b/keyboards/fjlabs/tf65rgbv2/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file diff --git a/keyboards/foxlab/time80/readme.md b/keyboards/foxlab/time80/readme.md index 66fd66b4b6..58ad560400 100644 --- a/keyboards/foxlab/time80/readme.md +++ b/keyboards/foxlab/time80/readme.md @@ -21,7 +21,7 @@ Flashing example for this keyboard ([after setting up the bootloadHID flashing e **Reset Key**: There are no reset switches or pads. Follow this [guide](https://docs.qmk.fm/#/flashing_bootloadhid) -to have it flashed for the first time. Remember to add a `RESET` +to have it flashed for the first time. Remember to add a `QK_BOOT` key on your keymap for future endeavors. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/frooastboard/walnut/readme.md b/keyboards/frooastboard/walnut/readme.md index c4baa40ce4..324069b4d7 100644 --- a/keyboards/frooastboard/walnut/readme.md +++ b/keyboards/frooastboard/walnut/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/geonworks/frogmini/readme.md b/keyboards/geonworks/frogmini/readme.md index 7c7c2e00f9..79ee6f2e32 100644 --- a/keyboards/geonworks/frogmini/readme.md +++ b/keyboards/geonworks/frogmini/readme.md @@ -20,7 +20,7 @@ The DFU state in the bootloader can be accessed in 2 ways: * **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the back of the PCB -* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ### Release Beta: @@ -28,7 +28,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the back of the PCB, for at least five seconds -* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ## Compile firmware diff --git a/keyboards/gl516/a52gl/readme.md b/keyboards/gl516/a52gl/readme.md index cfc7277eef..71d68942ac 100644 --- a/keyboards/gl516/a52gl/readme.md +++ b/keyboards/gl516/a52gl/readme.md @@ -19,7 +19,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/gl516/j73gl/readme.md b/keyboards/gl516/j73gl/readme.md index b6f1ebdc24..58842e09c1 100644 --- a/keyboards/gl516/j73gl/readme.md +++ b/keyboards/gl516/j73gl/readme.md @@ -19,7 +19,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/gl516/n51gl/readme.md b/keyboards/gl516/n51gl/readme.md index 916b8ff671..b01ba883d7 100644 --- a/keyboards/gl516/n51gl/readme.md +++ b/keyboards/gl516/n51gl/readme.md @@ -19,7 +19,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/gon/nerd60/readme.md b/keyboards/gon/nerd60/readme.md index 1b4689ea03..fe7b01bf7e 100644 --- a/keyboards/gon/nerd60/readme.md +++ b/keyboards/gon/nerd60/readme.md @@ -24,4 +24,4 @@ not work anymore. You will lose your warranty and official support from GON!_ ## Reset button -To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins. +To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `QK_BOOT` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins. diff --git a/keyboards/gon/nerdtkl/readme.md b/keyboards/gon/nerdtkl/readme.md index f8e982e770..db7025f10b 100644 --- a/keyboards/gon/nerdtkl/readme.md +++ b/keyboards/gon/nerdtkl/readme.md @@ -24,4 +24,4 @@ not work anymore. You will lose your warranty and official support from GON!_ ## Reset button -To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins. +To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `QK_BOOT` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins. diff --git a/keyboards/gopolar/gg86/readme.md b/keyboards/gopolar/gg86/readme.md index 0e655efa12..169d7e1904 100644 --- a/keyboards/gopolar/gg86/readme.md +++ b/keyboards/gopolar/gg86/readme.md @@ -21,4 +21,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Esc key) and plug in the keyboard * **Physical reset button**: Short press the button under Spacebar keycap to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/halokeys/elemental75/readme.md b/keyboards/halokeys/elemental75/readme.md index 6fd8ae056b..405bfb67b1 100644 --- a/keyboards/halokeys/elemental75/readme.md +++ b/keyboards/halokeys/elemental75/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the Escape key down (top left key) and plug in the keyboard * **Physical reset button**: Hold the reset button on the back of the PCB for at least 5 seconds. -* **Keycode in layout**: Hold the key mapped to `RESET` if it is available +* **Keycode in layout**: Hold the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/han60/readme.md b/keyboards/han60/readme.md index d2f0fb9811..94dd28c1ec 100644 --- a/keyboards/han60/readme.md +++ b/keyboards/han60/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/10k/readme.md b/keyboards/handwired/10k/readme.md index 270297e927..e681a274d3 100644 --- a/keyboards/handwired/10k/readme.md +++ b/keyboards/handwired/10k/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/3dfoxc/readme.md b/keyboards/handwired/3dfoxc/readme.md index 3d6e33a5c1..9f4dff57d6 100644 --- a/keyboards/handwired/3dfoxc/readme.md +++ b/keyboards/handwired/3dfoxc/readme.md @@ -37,6 +37,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/3dortho14u/readme.md b/keyboards/handwired/3dortho14u/readme.md index 3163891d48..926721fc72 100644 --- a/keyboards/handwired/3dortho14u/readme.md +++ b/keyboards/handwired/3dortho14u/readme.md @@ -37,4 +37,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/3dortho14u/rev1/readme.md b/keyboards/handwired/3dortho14u/rev1/readme.md index e785369b23..7a30179797 100644 --- a/keyboards/handwired/3dortho14u/rev1/readme.md +++ b/keyboards/handwired/3dortho14u/rev1/readme.md @@ -36,4 +36,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/3dortho14u/rev2/readme.md b/keyboards/handwired/3dortho14u/rev2/readme.md index bb2e982130..0b2f1c09df 100644 --- a/keyboards/handwired/3dortho14u/rev2/readme.md +++ b/keyboards/handwired/3dortho14u/rev2/readme.md @@ -36,4 +36,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/axon/readme.md b/keyboards/handwired/axon/readme.md index ca422130ef..d48297b4f7 100644 --- a/keyboards/handwired/axon/readme.md +++ b/keyboards/handwired/axon/readme.md @@ -15,8 +15,8 @@ Make example for this keyboard (after setting up your build environment): ## To reset into bootloader mode: 1. While plugged in, press and hold `BOOT` switch -2. While holding `BOOT`, press `RESET` and hold it for a second or two -3. Release `RESET` +2. While holding `BOOT`, press `QK_BOOT` and hold it for a second or two +3. Release `QK_BOOT` 4. Release `BOOT` 5. The keyboard should now be recognized as a USBasp programmer device. diff --git a/keyboards/handwired/baredev/rev1/readme.md b/keyboards/handwired/baredev/rev1/readme.md index 3f852f2bc6..1dac2fb6ad 100644 --- a/keyboards/handwired/baredev/rev1/readme.md +++ b/keyboards/handwired/baredev/rev1/readme.md @@ -26,4 +26,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file diff --git a/keyboards/handwired/battleship_gamepad/readme.md b/keyboards/handwired/battleship_gamepad/readme.md index c566753161..58eb72bd28 100644 --- a/keyboards/handwired/battleship_gamepad/readme.md +++ b/keyboards/handwired/battleship_gamepad/readme.md @@ -24,6 +24,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key in the 2x5 bank) and plug in the keyboard. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead. -* **Keycode in layout**: Press the key mapped to `RESET`. In the default layout this is the key at (0,0) on layer 1. +* **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the default layout this is the key at (0,0) on layer 1. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/croxsplit44/readme.md b/keyboards/handwired/croxsplit44/readme.md index b9eeb305b2..64a5e2593e 100644 --- a/keyboards/handwired/croxsplit44/readme.md +++ b/keyboards/handwired/croxsplit44/readme.md @@ -20,4 +20,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/dactyl_manuform/6x6/readme.md b/keyboards/handwired/dactyl_manuform/6x6/readme.md index 9b079be466..c7500448da 100644 --- a/keyboards/handwired/dactyl_manuform/6x6/readme.md +++ b/keyboards/handwired/dactyl_manuform/6x6/readme.md @@ -60,4 +60,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at F1 for left side, and F7 for right side. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET`, in dumam keymap it's assigned to F1 and F12 keys on mod layers. +* **Keycode in layout**: Press the key mapped to `QK_BOOT`, in dumam keymap it's assigned to F1 and F12 keys on mod layers. diff --git a/keyboards/handwired/elrgo_s/readme.md b/keyboards/handwired/elrgo_s/readme.md index 5fb5ab6acb..d741f423d9 100644 --- a/keyboards/handwired/elrgo_s/readme.md +++ b/keyboards/handwired/elrgo_s/readme.md @@ -25,4 +25,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button through the hole on the left side of the case. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/hillside/0_1/readme.md b/keyboards/handwired/hillside/0_1/readme.md index f1ff0f8506..3ae6b8bf3d 100644 --- a/keyboards/handwired/hillside/0_1/readme.md +++ b/keyboards/handwired/hillside/0_1/readme.md @@ -24,6 +24,6 @@ Flashing example for this keyboard: Enter the bootloader by either: * **Physical reset button**: Briefly press the button on the front of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/hillside/46/readme.md b/keyboards/handwired/hillside/46/readme.md index 8765c8029e..f1c9483cab 100644 --- a/keyboards/handwired/hillside/46/readme.md +++ b/keyboards/handwired/hillside/46/readme.md @@ -24,6 +24,6 @@ Flashing example for this keyboard: Enter the bootloader by either: * **Physical reset button**: Briefly press the button on the front of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/hillside/52/readme.md b/keyboards/handwired/hillside/52/readme.md index 62ca08ad67..3878bc062a 100644 --- a/keyboards/handwired/hillside/52/readme.md +++ b/keyboards/handwired/hillside/52/readme.md @@ -24,6 +24,6 @@ Flashing example for this keyboard: Enter the bootloader by either: * **Physical reset button**: Briefly press the button on the front of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/lagrange/readme.md b/keyboards/handwired/lagrange/readme.md index 5d7f5bb08e..a4157771a4 100644 --- a/keyboards/handwired/lagrange/readme.md +++ b/keyboards/handwired/lagrange/readme.md @@ -16,6 +16,6 @@ Flashing example for this keyboard: make handwired/lagrange:default:flash -To program the keyboard you'll need to reset it. This can be accomplished, either through the reset button, accessible via a hole in the bottom cover, or, if you've assigned the `RESET` keycode to a key, by pressing that key. +To program the keyboard you'll need to reset it. This can be accomplished, either through the reset button, accessible via a hole in the bottom cover, or, if you've assigned the `QK_BOOT` keycode to a key, by pressing that key. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/lemonpad/readme.md b/keyboards/handwired/lemonpad/readme.md index 4c1c2082e9..788bca6b43 100644 --- a/keyboards/handwired/lemonpad/readme.md +++ b/keyboards/handwired/lemonpad/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/m40/5x5_macropad/readme.md b/keyboards/handwired/m40/5x5_macropad/readme.md index 7ce38d6593..457b8cf4ee 100644 --- a/keyboards/handwired/m40/5x5_macropad/readme.md +++ b/keyboards/handwired/m40/5x5_macropad/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. In default layout (if you flashed it already once) it is the top-right button. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. In default layout (if you flashed it already once) it is the top-right button. diff --git a/keyboards/handwired/macroboard/readme.md b/keyboards/handwired/macroboard/readme.md index ee2351f99f..ea32085bc0 100644 --- a/keyboards/handwired/macroboard/readme.md +++ b/keyboards/handwired/macroboard/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available, by default 5th column, 5th row +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available, by default 5th column, 5th row diff --git a/keyboards/handwired/meck_tkl/readme.md b/keyboards/handwired/meck_tkl/readme.md index ec09047dde..9db9cd222f 100644 --- a/keyboards/handwired/meck_tkl/readme.md +++ b/keyboards/handwired/meck_tkl/readme.md @@ -24,7 +24,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Wiring instructions diff --git a/keyboards/handwired/snatchpad/readme.md b/keyboards/handwired/snatchpad/readme.md index 98021cc6bd..9e502579b5 100644 --- a/keyboards/handwired/snatchpad/readme.md +++ b/keyboards/handwired/snatchpad/readme.md @@ -31,4 +31,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/swiftrax/bumblebee/readme.md b/keyboards/handwired/swiftrax/bumblebee/readme.md index 32091cb83b..343fb81bf8 100644 --- a/keyboards/handwired/swiftrax/bumblebee/readme.md +++ b/keyboards/handwired/swiftrax/bumblebee/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/handwired/swiftrax/digicarp65/readme.md b/keyboards/handwired/swiftrax/digicarp65/readme.md index 619ec519f0..34e0c0b755 100644 --- a/keyboards/handwired/swiftrax/digicarp65/readme.md +++ b/keyboards/handwired/swiftrax/digicarp65/readme.md @@ -17,5 +17,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key)and plug in the keyboard -* **Physical reset button**: Briefly short the pad on the back of the PCB labeled RESET -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Physical reset button**: Briefly short the pad on the back of the PCB labeled QK_BOOT +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/swiftrax/digicarpice/readme.md b/keyboards/handwired/swiftrax/digicarpice/readme.md index 228db23a7f..d9deec7dc7 100644 --- a/keyboards/handwired/swiftrax/digicarpice/readme.md +++ b/keyboards/handwired/swiftrax/digicarpice/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard * **Physical reset button**: short the pads on the back of the pcb -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/handwired/swiftrax/glacier/readme.md b/keyboards/handwired/swiftrax/glacier/readme.md index 36588e000e..e09c179ae9 100644 --- a/keyboards/handwired/swiftrax/glacier/readme.md +++ b/keyboards/handwired/swiftrax/glacier/readme.md @@ -9,7 +9,7 @@ ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead - * **Keycode in layout**: Press the key mapped to `RESET` if it is available + * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for flashing this keyboard (after setting up your build environment): diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md index f732295ba3..6b98bdc9b9 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md @@ -35,4 +35,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top right key on the right side, or the top left key on the left side while plugging in. * **Physical reset button**: Briefly press the "USER" button on the BlackPill -* **Keycode in layout**: Press the key mapped to `RESET`. +* **Keycode in layout**: Press the key mapped to `QK_BOOT`. diff --git a/keyboards/handwired/tractyl_manuform/readme.md b/keyboards/handwired/tractyl_manuform/readme.md index e78fd2ee06..576a7cc74e 100644 --- a/keyboards/handwired/tractyl_manuform/readme.md +++ b/keyboards/handwired/tractyl_manuform/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/wakizashi40/readme.md b/keyboards/handwired/wakizashi40/readme.md index 8bb6c2aebc..b419f5032b 100644 --- a/keyboards/handwired/wakizashi40/readme.md +++ b/keyboards/handwired/wakizashi40/readme.md @@ -18,4 +18,4 @@ See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/hineybush/h08_ocelot/readme.md b/keyboards/hineybush/h08_ocelot/readme.md index 07d170101c..fd44f4263d 100644 --- a/keyboards/hineybush/h08_ocelot/readme.md +++ b/keyboards/hineybush/h08_ocelot/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/hineybush/h65/readme.md b/keyboards/hineybush/h65/readme.md index c793a44966..91a15c6222 100644 --- a/keyboards/hineybush/h65/readme.md +++ b/keyboards/hineybush/h65/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/hineybush/h65_hotswap/readme.md b/keyboards/hineybush/h65_hotswap/readme.md index 5e2250b5af..591b25b337 100644 --- a/keyboards/hineybush/h65_hotswap/readme.md +++ b/keyboards/hineybush/h65_hotswap/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/hineybush/ibis/readme.md b/keyboards/hineybush/ibis/readme.md index 0c345e7c81..e20be2e7f6 100644 --- a/keyboards/hineybush/ibis/readme.md +++ b/keyboards/hineybush/ibis/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/horizon/readme.md b/keyboards/horizon/readme.md index 7999503fb5..1ac64b42ce 100644 --- a/keyboards/horizon/readme.md +++ b/keyboards/horizon/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key and plug in the keyboard. * **Physical reset button**: Briefly press the button on the top center of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. diff --git a/keyboards/horrortroll/chinese_pcb/black_e65/readme.md b/keyboards/horrortroll/chinese_pcb/black_e65/readme.md index 2a08ee20f3..115f91424b 100644 --- a/keyboards/horrortroll/chinese_pcb/black_e65/readme.md +++ b/keyboards/horrortroll/chinese_pcb/black_e65/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (3,6) in the matrix (B key) and plug in the keyboard * **Physical reset button**: Press and hold the button on the back of the PCB, then plug in the keyboard -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/horrortroll/chinese_pcb/devil68_pro/readme.md b/keyboards/horrortroll/chinese_pcb/devil68_pro/readme.md index 27bd974af4..0d486832b3 100644 --- a/keyboards/horrortroll/chinese_pcb/devil68_pro/readme.md +++ b/keyboards/horrortroll/chinese_pcb/devil68_pro/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (3,6) in the matrix (B key) and plug in the keyboard * **Reset by wire**: Using a wire, 1 head to GND hole and other one to Reset pin on MCU -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/horrortroll/handwired_k552/readme.md b/keyboards/horrortroll/handwired_k552/readme.md index 85e99f4cd4..e45cab9f9c 100644 --- a/keyboards/horrortroll/handwired_k552/readme.md +++ b/keyboards/horrortroll/handwired_k552/readme.md @@ -19,4 +19,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (4,6) in the matrix (B key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/horrortroll/lemon40/readme.md b/keyboards/horrortroll/lemon40/readme.md index 4c2a7bd543..7cb71f9f20 100644 --- a/keyboards/horrortroll/lemon40/readme.md +++ b/keyboards/horrortroll/lemon40/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Esc key) and plug in the keyboard * **Reset by wire**: Using a wire, 1 head to GND hole and other one to RST hole -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/horrortroll/paws60/readme.md b/keyboards/horrortroll/paws60/readme.md index 62783d3b5e..93acfdfc3e 100644 --- a/keyboards/horrortroll/paws60/readme.md +++ b/keyboards/horrortroll/paws60/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (3,6) in the matrix (B key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/ibnuda/squiggle/readme.md b/keyboards/ibnuda/squiggle/readme.md index 95204ade57..20998844c9 100644 --- a/keyboards/ibnuda/squiggle/readme.md +++ b/keyboards/ibnuda/squiggle/readme.md @@ -21,4 +21,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to To enter to the bootloader you need to: -* Press the key mapped to `RESET` +* Press the key mapped to `QK_BOOT` diff --git a/keyboards/idobao/id63/readme.md b/keyboards/idobao/id63/readme.md index 15ed24824c..a4566f6f20 100644 --- a/keyboards/idobao/id63/readme.md +++ b/keyboards/idobao/id63/readme.md @@ -36,4 +36,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the [Escape] key and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET`, default is [Fn]+[B] +* **Keycode in layout**: Press the key mapped to `QK_BOOT`, default is [Fn]+[B] diff --git a/keyboards/idobao/id67/readme.md b/keyboards/idobao/id67/readme.md index b69e2e60b1..aff9fa3dd9 100644 --- a/keyboards/idobao/id67/readme.md +++ b/keyboards/idobao/id67/readme.md @@ -37,4 +37,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the `Escape` key and plug in the keyboard. * **Physical reset button**: Briefly press the button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` (FN+Z). +* **Keycode in layout**: Press the key mapped to `QK_BOOT` (FN+Z). diff --git a/keyboards/idobao/id75/v2/readme.md b/keyboards/idobao/id75/v2/readme.md index 76a94ae38c..6e6209b467 100644 --- a/keyboards/idobao/id75/v2/readme.md +++ b/keyboards/idobao/id75/v2/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/idobao/id80/v3/readme.md b/keyboards/idobao/id80/v3/readme.md index dc6c67b4f4..11e9865a9a 100644 --- a/keyboards/idobao/id80/v3/readme.md +++ b/keyboards/idobao/id80/v3/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/idobao/id87/v2/readme.md b/keyboards/idobao/id87/v2/readme.md index 06a3f2c08a..849e642157 100644 --- a/keyboards/idobao/id87/v2/readme.md +++ b/keyboards/idobao/id87/v2/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/idobao/id96/readme.md b/keyboards/idobao/id96/readme.md index 01c42b4e73..e9cbed5270 100644 --- a/keyboards/idobao/id96/readme.md +++ b/keyboards/idobao/id96/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/idobao/montex/v1rgb/readme.md b/keyboards/idobao/montex/v1rgb/readme.md index 296f05f239..8066c2193d 100755 --- a/keyboards/idobao/montex/v1rgb/readme.md +++ b/keyboards/idobao/montex/v1rgb/readme.md @@ -27,4 +27,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or [Esc]) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/idobao/montex/v2/readme.md b/keyboards/idobao/montex/v2/readme.md index 793507b8f1..63808c0a50 100755 --- a/keyboards/idobao/montex/v2/readme.md +++ b/keyboards/idobao/montex/v2/readme.md @@ -38,4 +38,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/iron180/readme.md b/keyboards/iron180/readme.md index d89ca912ef..bfcce13f09 100644 --- a/keyboards/iron180/readme.md +++ b/keyboards/iron180/readme.md @@ -18,7 +18,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard with the key pressed; * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds; -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESCAPE key in layer 1 of the default layout); +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESCAPE key in layer 1 of the default layout); ## Compile firmware and flash diff --git a/keyboards/jels/jels60/readme.md b/keyboards/jels/jels60/readme.md index 0b72d3e346..8def326cba 100644 --- a/keyboards/jels/jels60/readme.md +++ b/keyboards/jels/jels60/readme.md @@ -20,4 +20,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top left key (ESC/Tilde) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/jels/jels88/readme.md b/keyboards/jels/jels88/readme.md index 37d18dbf40..fa590aa303 100644 --- a/keyboards/jels/jels88/readme.md +++ b/keyboards/jels/jels88/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top right key (ESC) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/jorne/readme.md b/keyboards/jorne/readme.md index 71c698e67e..77d56b9d51 100644 --- a/keyboards/jorne/readme.md +++ b/keyboards/jorne/readme.md @@ -14,7 +14,7 @@ Jorne is essentially [Corne](https://github.com/foostan/crkbd) but with an extra Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the reset button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` +* **Keycode in layout**: Press the key mapped to `QK_BOOT` ## Make diff --git a/keyboards/k34/readme.md b/keyboards/k34/readme.md index 8f17c7e5de..8576def947 100644 --- a/keyboards/k34/readme.md +++ b/keyboards/k34/readme.md @@ -11,7 +11,7 @@ All hardware supported can be found in the [k34 repository](https://github.com/w ## Flashing Instructions -To enter the bootloader, short the RST and GND pins, or press the key mapped to `RESET`. +To enter the bootloader, short the RST and GND pins, or press the key mapped to `QK_BOOT`. Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kapl/readme.md b/keyboards/kapl/readme.md index c42a5d8947..4ccfb8dcba 100644 --- a/keyboards/kapl/readme.md +++ b/keyboards/kapl/readme.md @@ -24,4 +24,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the reset button on the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/kb58/readme.md b/keyboards/kb58/readme.md index 6d02b1787a..4ea36cbbde 100644 --- a/keyboards/kb58/readme.md +++ b/keyboards/kb58/readme.md @@ -18,6 +18,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kb_elmo/vertex/readme.md b/keyboards/kb_elmo/vertex/readme.md index 0710e48070..cbcdd9a179 100644 --- a/keyboards/kb_elmo/vertex/readme.md +++ b/keyboards/kb_elmo/vertex/readme.md @@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Briefly press the button labeled "Reset" on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/kbdfans/baguette66/rgb/readme.md b/keyboards/kbdfans/baguette66/rgb/readme.md index d8054ea8a7..a5b67d03b8 100644 --- a/keyboards/kbdfans/baguette66/rgb/readme.md +++ b/keyboards/kbdfans/baguette66/rgb/readme.md @@ -13,7 +13,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/baguette66/soldered/readme.md b/keyboards/kbdfans/baguette66/soldered/readme.md index 5118864331..148e042c6c 100644 --- a/keyboards/kbdfans/baguette66/soldered/readme.md +++ b/keyboards/kbdfans/baguette66/soldered/readme.md @@ -13,7 +13,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/boop65/rgb/readme.md b/keyboards/kbdfans/boop65/rgb/readme.md index 9b24b62af4..b8a2e5993c 100644 --- a/keyboards/kbdfans/boop65/rgb/readme.md +++ b/keyboards/kbdfans/boop65/rgb/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/bounce/75/hotswap/readme.md b/keyboards/kbdfans/bounce/75/hotswap/readme.md index eb6b8e6fc0..7e631099cc 100644 --- a/keyboards/kbdfans/bounce/75/hotswap/readme.md +++ b/keyboards/kbdfans/bounce/75/hotswap/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/kbdfans/bounce/75/soldered/readme.md b/keyboards/kbdfans/bounce/75/soldered/readme.md index fb0b364d19..f18847b8fb 100644 --- a/keyboards/kbdfans/bounce/75/soldered/readme.md +++ b/keyboards/kbdfans/bounce/75/soldered/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/bounce/pad/readme.md b/keyboards/kbdfans/bounce/pad/readme.md index ae0276ed28..54ba70a011 100644 --- a/keyboards/kbdfans/bounce/pad/readme.md +++ b/keyboards/kbdfans/bounce/pad/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbd19x/readme.md b/keyboards/kbdfans/kbd19x/readme.md index 910b2f1b89..1c2f7f2c1c 100644 --- a/keyboards/kbdfans/kbd19x/readme.md +++ b/keyboards/kbdfans/kbd19x/readme.md @@ -25,6 +25,6 @@ Flashing example for this keyboard: To reset the board into bootloader mode, do one of the following: * **Bootmagic reset**: Hold the `Esc` key while connecting the USB cable (also erases persistent settings) -* **Keycode in keymap**: Press the key mapped to `RESET` if it is available (`Fn`+`Backspace` by default) +* **Keycode in keymap**: Press the key mapped to `QK_BOOT` if it is available (`Fn`+`Backspace` by default) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v4/readme.md b/keyboards/kbdfans/kbd67/mkiirgb/v4/readme.md index b603992f69..ad8b38a62e 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v4/readme.md +++ b/keyboards/kbdfans/kbd67/mkiirgb/v4/readme.md @@ -15,4 +15,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down esc in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET`
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT`
\ No newline at end of file diff --git a/keyboards/kbdfans/kbd67/mkiirgb_iso/readme.md b/keyboards/kbdfans/kbd67/mkiirgb_iso/readme.md index 7673acc580..b542cb5aaa 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb_iso/readme.md +++ b/keyboards/kbdfans/kbd67/mkiirgb_iso/readme.md @@ -15,4 +15,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down esc in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` +* **Keycode in layout**: Press the key mapped to `QK_BOOT` diff --git a/keyboards/kbdfans/kbd75hs/readme.md b/keyboards/kbdfans/kbd75hs/readme.md index 4f7943d4fe..0326a1e008 100644 --- a/keyboards/kbdfans/kbd75hs/readme.md +++ b/keyboards/kbdfans/kbd75hs/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbd75rgb/readme.md b/keyboards/kbdfans/kbd75rgb/readme.md index 2dc002022f..acd3d30329 100644 --- a/keyboards/kbdfans/kbd75rgb/readme.md +++ b/keyboards/kbdfans/kbd75rgb/readme.md @@ -13,7 +13,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/odin/rgb/readme.md b/keyboards/kbdfans/odin/rgb/readme.md index 3530fcca40..e37fc13ce1 100644 --- a/keyboards/kbdfans/odin/rgb/readme.md +++ b/keyboards/kbdfans/odin/rgb/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**:press and hold the button on the back of the PCB, then plugin to PC -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/odin/soldered/readme.md b/keyboards/kbdfans/odin/soldered/readme.md index 1ffc34597f..723bceecb2 100644 --- a/keyboards/kbdfans/odin/soldered/readme.md +++ b/keyboards/kbdfans/odin/soldered/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**:press and hold the button on the back of the PCB, then plugin to PC -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/phaseone/readme.md b/keyboards/kbdfans/phaseone/readme.md index b5b21da672..451a3e2a44 100644 --- a/keyboards/kbdfans/phaseone/readme.md +++ b/keyboards/kbdfans/phaseone/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/tiger80/readme.md b/keyboards/kbdfans/tiger80/readme.md index 60190805d7..c5fc056875 100644 --- a/keyboards/kbdfans/tiger80/readme.md +++ b/keyboards/kbdfans/tiger80/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbnordic/nordic60/readme.md b/keyboards/kbnordic/nordic60/readme.md index 7b4f29d22e..43b2bb761d 100644 --- a/keyboards/kbnordic/nordic60/readme.md +++ b/keyboards/kbnordic/nordic60/readme.md @@ -17,4 +17,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the ESC key * **Physical reset button**: Briefly press the button on the back of the PCB (S301) or short the two pads in the "RST" header. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/keebio/bamfk1/readme.md b/keyboards/keebio/bamfk1/readme.md index a90ee8ac8c..5fdd285afd 100644 --- a/keyboards/keebio/bamfk1/readme.md +++ b/keyboards/keebio/bamfk1/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/keebio/bigswitchseat/readme.md b/keyboards/keebio/bigswitchseat/readme.md index 43e62d4e53..dc20a9cb93 100644 --- a/keyboards/keebio/bigswitchseat/readme.md +++ b/keyboards/keebio/bigswitchseat/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/keebsforall/coarse60/readme.md b/keyboards/keebsforall/coarse60/readme.md index cde6152499..4d4f864eed 100644 --- a/keyboards/keebsforall/coarse60/readme.md +++ b/keyboards/keebsforall/coarse60/readme.md @@ -17,6 +17,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key (Escape by default) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB (S1) -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/keebsforall/freebirdnp/lite/readme.md b/keyboards/keebsforall/freebirdnp/lite/readme.md index e0d0dda059..b2860abc84 100644 --- a/keyboards/keebsforall/freebirdnp/lite/readme.md +++ b/keyboards/keebsforall/freebirdnp/lite/readme.md @@ -14,6 +14,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/keebsforall/freebirdnp/pro/readme.md b/keyboards/keebsforall/freebirdnp/pro/readme.md index 3b06a72d11..b53e4b9fd9 100644 --- a/keyboards/keebsforall/freebirdnp/pro/readme.md +++ b/keyboards/keebsforall/freebirdnp/pro/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/keebsforall/freebirdtkl/readme.md b/keyboards/keebsforall/freebirdtkl/readme.md index 5b5bade278..1b61d3c141 100644 --- a/keyboards/keebsforall/freebirdtkl/readme.md +++ b/keyboards/keebsforall/freebirdtkl/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/keybee/keybee65/readme.md b/keyboards/keybee/keybee65/readme.md index afe9cfd225..a6fe9cb0c6 100644 --- a/keyboards/keybee/keybee65/readme.md +++ b/keyboards/keybee/keybee65/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the Enter key on layer 1 which is mapped to `RESET`
\ No newline at end of file +* **Keycode in layout**: Press the Enter key on layer 1 which is mapped to `QK_BOOT`
\ No newline at end of file diff --git a/keyboards/keystonecaps/gameroyadvance/readme.md b/keyboards/keystonecaps/gameroyadvance/readme.md index cc733cea46..9a0c74ef26 100644 --- a/keyboards/keystonecaps/gameroyadvance/readme.md +++ b/keyboards/keystonecaps/gameroyadvance/readme.md @@ -25,6 +25,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` (FN + Escape by default) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` (FN + Escape by default) Special thanks to @tpstevens for all of his hard work in creating these firmware files from the mess that I had made. diff --git a/keyboards/keyten/aperture/readme.md b/keyboards/keyten/aperture/readme.md index 80cd0b8b9e..06417bae0f 100644 --- a/keyboards/keyten/aperture/readme.md +++ b/keyboards/keyten/aperture/readme.md @@ -25,5 +25,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* Keycode in layout: Press the key mapped to RESET if it is available +* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available * Physical reset button: Press the button on the back of the PCB diff --git a/keyboards/keyten/kt60_m/readme.md b/keyboards/keyten/kt60_m/readme.md index 32ca32c4b5..6a44fb2393 100644 --- a/keyboards/keyten/kt60_m/readme.md +++ b/keyboards/keyten/kt60_m/readme.md @@ -23,5 +23,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* Keycode in layout: Press the key mapped to RESET if it is available +* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available * Physical reset button: Press the button on the back of the PCB diff --git a/keyboards/kikoslab/ellora65/readme.md b/keyboards/kikoslab/ellora65/readme.md index 419c5418ec..b021188cf9 100644 --- a/keyboards/kikoslab/ellora65/readme.md +++ b/keyboards/kikoslab/ellora65/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (1,0) in the matrix (escape key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kin80/readme.md b/keyboards/kin80/readme.md index 9adee072e7..3ed52b4a59 100644 --- a/keyboards/kin80/readme.md +++ b/keyboards/kin80/readme.md @@ -30,4 +30,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the the top left key and plug in the keyboard. * **Physical reset button**. Hold 'boot0' button on MCU board, press 'reset', then release 'boot0'. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file diff --git a/keyboards/kiwikey/borderland/readme.md b/keyboards/kiwikey/borderland/readme.md index 98f76e0f13..6a7b602ba9 100644 --- a/keyboards/kiwikey/borderland/readme.md +++ b/keyboards/kiwikey/borderland/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET`, in default keymap it is `Fn+R` +* **Keycode in layout**: Press the key mapped to `QK_BOOT`, in default keymap it is `Fn+R` diff --git a/keyboards/kopibeng/mnk65/readme.md b/keyboards/kopibeng/mnk65/readme.md index 80e256e617..f4c07ce6a8 100644 --- a/keyboards/kopibeng/mnk65/readme.md +++ b/keyboards/kopibeng/mnk65/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * Physical reset button: Press the RESET switch on top side of PCB. * Bootmagic reset: Unplug keyboard, hold down ESC key and plug in the keyboard. -* Keycode reset: Press the RESET keycode (default: MO(1) + Home keys) in layout if available. +* Keycode reset: Press the `QK_BOOT` keycode (default: MO(1) + Home keys) in layout if available. diff --git a/keyboards/kopibeng/typ65/readme.md b/keyboards/kopibeng/typ65/readme.md index af8106891d..4e9cd63374 100644 --- a/keyboards/kopibeng/typ65/readme.md +++ b/keyboards/kopibeng/typ65/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * Physical reset button: Press the RESET switch on top side of PCB. * Bootmagic reset: Unplug keyboard, hold down ESC key and plug in the keyboard. -* Keycode reset: Press the RESET keycode (default: MO(1) + HOME keys in default layout). +* Keycode reset: Press the `QK_BOOT` keycode (default: MO(1) + HOME keys in default layout). diff --git a/keyboards/kopibeng/xt60/readme.md b/keyboards/kopibeng/xt60/readme.md index 177b22be4c..6eacaded6f 100644 --- a/keyboards/kopibeng/xt60/readme.md +++ b/keyboards/kopibeng/xt60/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * Physical reset button: Press the RESET switch on top side of PCB. * Bootmagic reset: Unplug keyboard, hold down ESC key and plug in the keyboard. -* Keycode reset: Press the RESET keycode (default: MO(1) + R keys) in layout if available.
\ No newline at end of file +* Keycode reset: Press the `QK_BOOT` keycode (default: MO(1) + R keys) in layout if available.
\ No newline at end of file diff --git a/keyboards/kopibeng/xt60_singa/readme.md b/keyboards/kopibeng/xt60_singa/readme.md index 5da2a0a606..f8efffcf1c 100644 --- a/keyboards/kopibeng/xt60_singa/readme.md +++ b/keyboards/kopibeng/xt60_singa/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * Physical reset button: Press the RESET switch on top side of PCB. * Bootmagic reset: Unplug keyboard, hold down ESC key and plug in the keyboard. -* Keycode reset: Press the RESET keycode (default: MO(1) + R keys) in layout if available.
\ No newline at end of file +* Keycode reset: Press the `QK_BOOT` keycode (default: MO(1) + R keys) in layout if available.
\ No newline at end of file diff --git a/keyboards/kopibeng/xt8x/readme.md b/keyboards/kopibeng/xt8x/readme.md index cdb333a260..0c94adec38 100644 --- a/keyboards/kopibeng/xt8x/readme.md +++ b/keyboards/kopibeng/xt8x/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * Physical reset button: Press the RESET switch on top side of PCB. * Bootmagic reset: Unplug keyboard, hold down ESC key and plug in the keyboard. -* Keycode reset: Press the RESET keycode (default: MO(1) + R keys) in layout if available. +* Keycode reset: Press the `QK_BOOT` keycode (default: MO(1) + R keys) in layout if available. diff --git a/keyboards/kprepublic/bm60hsrgb_ec/rev1/readme.md b/keyboards/kprepublic/bm60hsrgb_ec/rev1/readme.md index 1e284041d0..f22bf4f97c 100644 --- a/keyboards/kprepublic/bm60hsrgb_ec/rev1/readme.md +++ b/keyboards/kprepublic/bm60hsrgb_ec/rev1/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kprepublic/bm60hsrgb_ec/rev2/readme.md b/keyboards/kprepublic/bm60hsrgb_ec/rev2/readme.md index 6454a57420..caf1dae82a 100644 --- a/keyboards/kprepublic/bm60hsrgb_ec/rev2/readme.md +++ b/keyboards/kprepublic/bm60hsrgb_ec/rev2/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kudox_full/readme.md b/keyboards/kudox_full/readme.md index 185a1394d4..494d7508c8 100644 --- a/keyboards/kudox_full/readme.md +++ b/keyboards/kudox_full/readme.md @@ -16,7 +16,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Building Firmware diff --git a/keyboards/late9/readme.md b/keyboards/late9/readme.md index 1d85e788fb..93e5a40823 100644 --- a/keyboards/late9/readme.md +++ b/keyboards/late9/readme.md @@ -20,7 +20,7 @@ Flashing example for this keyboard: make late9/rev1:default:flash -When asked by the terminal, short with a metal wire the pins on the backside of the board highlighted as `RST` (one is the `RESET` and the other one is `GROUND`) to enter the bootloader and let the OS detects the device. +When asked by the terminal, short with a metal wire the pins on the backside of the board highlighted as `RST` (one is the `QK_BOOT` and the other one is `GROUND`) to enter the bootloader and let the OS detects the device. After installing this firmware you can use Bootmagic to enter the bootloader while plugging in your LATE-9. By default it's the button on the upper-left of the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lefty/readme.md b/keyboards/lefty/readme.md index f8cc2ec203..7562517a22 100644 --- a/keyboards/lefty/readme.md +++ b/keyboards/lefty/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead -Keycode in layout: Press the key mapped to RESET if it is available +Keycode in layout: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/lfkeyboards/mini1800/readme.md b/keyboards/lfkeyboards/mini1800/readme.md index 4e35ac537e..9cf7748856 100644 --- a/keyboards/lfkeyboards/mini1800/readme.md +++ b/keyboards/lfkeyboards/mini1800/readme.md @@ -21,6 +21,6 @@ Flashing example for this keyboard: To reset the board into bootloader mode, do one of the following: * **Physical reset button**: Briefly press the button on the bottom of the PCB (between Q and W keys) -* **Keycode in keymap**: Press the key mapped to `RESET` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default) +* **Keycode in keymap**: Press the key mapped to `QK_BOOT` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lfkeyboards/mini1800/reva/readme.md b/keyboards/lfkeyboards/mini1800/reva/readme.md index 8460bb5326..7c1e5c10de 100644 --- a/keyboards/lfkeyboards/mini1800/reva/readme.md +++ b/keyboards/lfkeyboards/mini1800/reva/readme.md @@ -17,6 +17,6 @@ Flashing example for this keyboard: To reset the board into bootloader mode, do one of the following: * **Physical reset button**: Briefly press the button on the bottom of the PCB (between Q and W keys) -* **Keycode in keymap**: Press the key mapped to `RESET` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default) +* **Keycode in keymap**: Press the key mapped to `QK_BOOT` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lfkeyboards/mini1800/revc/readme.md b/keyboards/lfkeyboards/mini1800/revc/readme.md index 5d442cb6d9..c872c15ed8 100644 --- a/keyboards/lfkeyboards/mini1800/revc/readme.md +++ b/keyboards/lfkeyboards/mini1800/revc/readme.md @@ -19,6 +19,6 @@ Flashing example for this keyboard: To reset the board into bootloader mode, do one of the following: * **Physical reset button**: Briefly press the button on the bottom of the PCB (between Q and W keys) -* **Keycode in keymap**: Press the key mapped to `RESET` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default) +* **Keycode in keymap**: Press the key mapped to `QK_BOOT` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lime/readme.md b/keyboards/lime/readme.md index 539ae97fd3..bd72b9d6c5 100644 --- a/keyboards/lime/readme.md +++ b/keyboards/lime/readme.md @@ -22,7 +22,7 @@ Flashing example for this keyboard: Press reset button on he keyboard when asked. You can do that in 3 ways: * **Physical reset button**: Briefly press the button near the TRRS connector on the PCB - if you haven't installed one, short the pads instead -* **Keycode in layout**: Press the key mapped to `RESET` (`Lower` + `Raise` + `Esc` on the default layout) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` (`Lower` + `Raise` + `Esc` on the default layout) * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard Disconnect the first half, connect the second one and repeat the process. diff --git a/keyboards/linworks/fave65h/readme.md b/keyboards/linworks/fave65h/readme.md index 712a5e0fd4..09649fa860 100644 --- a/keyboards/linworks/fave65h/readme.md +++ b/keyboards/linworks/fave65h/readme.md @@ -17,7 +17,7 @@ Make example for this keyboard (after setting up your build environment): ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) -* **Physical reset short**: Briefly short the 2 pads labelled RESET on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Physical reset short**: Briefly short the 2 pads labelled QK_BOOT on the back of the PCB +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/linworks/fave84h/readme.md b/keyboards/linworks/fave84h/readme.md index 3dd93ac762..22ce5fd428 100644 --- a/keyboards/linworks/fave84h/readme.md +++ b/keyboards/linworks/fave84h/readme.md @@ -19,5 +19,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) -* **Physical reset short**: Briefly short the 2 pads labelled RESET on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Physical reset short**: Briefly short the 2 pads labelled QK_BOOT on the back of the PCB +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/linworks/fave87h/readme.md b/keyboards/linworks/fave87h/readme.md index 8bc05fd4d4..bda921a61b 100644 --- a/keyboards/linworks/fave87h/readme.md +++ b/keyboards/linworks/fave87h/readme.md @@ -19,5 +19,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) -* **Physical reset short**: Briefly short the 2 pads labelled RESET on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Physical reset short**: Briefly short the 2 pads labelled QK_BOOT on the back of the PCB +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/lucid/alexa/readme.md b/keyboards/lucid/alexa/readme.md index a0cef72913..6fc4aac146 100644 --- a/keyboards/lucid/alexa/readme.md +++ b/keyboards/lucid/alexa/readme.md @@ -20,6 +20,6 @@ Flashing example for this keyboard: Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (Fn+Backslash by default) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (Fn+Backslash by default) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lyso1/lefishe/readme.md b/keyboards/lyso1/lefishe/readme.md index eb8322b2df..07fe84ba17 100644 --- a/keyboards/lyso1/lefishe/readme.md +++ b/keyboards/lyso1/lefishe/readme.md @@ -15,7 +15,7 @@ Enter into the bootloader to flash new firmware in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix(The F1 key in this case) and plug the the keyboard in. * **Physical reset button**: Briefly press the button on the back and left side of the PCB(exactly under where the "2" key would be located) while the PCB is plugged in. - * **Keycode in layout**: Press the key mapped to `RESET` (RALT + E in this case) while the keyboard is plugged in. + * **Keycode in layout**: Press the key mapped to `QK_BOOT` (RALT + E in this case) while the keyboard is plugged in. Flashing example for this keyboard: diff --git a/keyboards/lz/erghost/readme.md b/keyboards/lz/erghost/readme.md index 8a48d912d0..0a4a504227 100644 --- a/keyboards/lz/erghost/readme.md +++ b/keyboards/lz/erghost/readme.md @@ -23,5 +23,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Physical reset button**: Press the button on the back of the PCB
\ No newline at end of file diff --git a/keyboards/machine_industries/m4_a/readme.md b/keyboards/machine_industries/m4_a/readme.md index 37c16639d1..0081c6b7d9 100644 --- a/keyboards/machine_industries/m4_a/readme.md +++ b/keyboards/machine_industries/m4_a/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/machkeyboards/mach3/readme.md b/keyboards/machkeyboards/mach3/readme.md index 16c61511b1..d4c6f6a65c 100644 --- a/keyboards/machkeyboards/mach3/readme.md +++ b/keyboards/machkeyboards/mach3/readme.md @@ -13,7 +13,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/makenova/omega/omega4/readme.md b/keyboards/makenova/omega/omega4/readme.md index 0b4db785d5..c736cedc24 100644 --- a/keyboards/makenova/omega/omega4/readme.md +++ b/keyboards/makenova/omega/omega4/readme.md @@ -20,4 +20,4 @@ Enter the bootloader in 3 ways: - **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard - **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -- **Keycode in layout**: Press the key mapped to `RESET` if it is available +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/matrix/falcon/readme.md b/keyboards/matrix/falcon/readme.md index c283650fcf..a2ceb82163 100644 --- a/keyboards/matrix/falcon/readme.md +++ b/keyboards/matrix/falcon/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. * **Physical reset button**: Briefly short cut the *RST* pin with the *GND* pin (pin at the topside of the *RST*) on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available.
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.
\ No newline at end of file diff --git a/keyboards/matrix/me/readme.md b/keyboards/matrix/me/readme.md index 6a39bb0398..f04229b2d1 100644 --- a/keyboards/matrix/me/readme.md +++ b/keyboards/matrix/me/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. * **Physical reset button**: Briefly short cut the *RST* pin with the *GND* pin (pin at the topside of the *RST*) on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available.
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.
\ No newline at end of file diff --git a/keyboards/mechanickeys/miniashen40/readme.md b/keyboards/mechanickeys/miniashen40/readme.md index 29f7b68fd1..c61398ba1a 100644 --- a/keyboards/mechanickeys/miniashen40/readme.md +++ b/keyboards/mechanickeys/miniashen40/readme.md @@ -32,9 +32,9 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical**: 1. Press and hold `BOOT` switch - 2. Tap `RESET` switch + 2. Tap `QK_BOOT` switch 3. Release `BOOT` switch -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Flash bootloader * [Follow this instructions](https://github.com/jfescobar18/USBaspLoader) diff --git a/keyboards/mechbrewery/mb65h/readme.md b/keyboards/mechbrewery/mb65h/readme.md index e9802152b3..3137cfe001 100644 --- a/keyboards/mechbrewery/mb65h/readme.md +++ b/keyboards/mechbrewery/mb65h/readme.md @@ -8,7 +8,7 @@ * Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/mechbrewery/mb65s/readme.md b/keyboards/mechbrewery/mb65s/readme.md index e8505cb6fe..cacc0fc0c1 100644 --- a/keyboards/mechbrewery/mb65s/readme.md +++ b/keyboards/mechbrewery/mb65s/readme.md @@ -8,7 +8,7 @@ * Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/mechlovin/foundation/readme.md b/keyboards/mechlovin/foundation/readme.md index 4a998da039..61dacd55bd 100644 --- a/keyboards/mechlovin/foundation/readme.md +++ b/keyboards/mechlovin/foundation/readme.md @@ -22,5 +22,5 @@ Enter the bootloader in 4 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Hardware reset**: Press reset button (located on the bottom side of the PCB)
\ No newline at end of file diff --git a/keyboards/mechlovin/hex4b/rev2/readme.md b/keyboards/mechlovin/hex4b/rev2/readme.md index 328c869704..01ae8ea724 100644 --- a/keyboards/mechlovin/hex4b/rev2/readme.md +++ b/keyboards/mechlovin/hex4b/rev2/readme.md @@ -24,5 +24,5 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Hardware reset**: Press reset button (located on the top side of the PCB)
\ No newline at end of file diff --git a/keyboards/mechlovin/infinity875/readme.md b/keyboards/mechlovin/infinity875/readme.md index b3e14a7bb7..39c76e5dc9 100644 --- a/keyboards/mechlovin/infinity875/readme.md +++ b/keyboards/mechlovin/infinity875/readme.md @@ -19,6 +19,6 @@ Flashing example for this keyboard: See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). **Reset Key:** 3 ways to put the IF87.5 into bootloader: -- By keycode: Tap RESET keycode. +- By keycode: Press the key mapped to `QK_BOOT` if it is available. - By bootmagic: hold ESC key while plugging in. - By hardware: Push reset button on bottom of the PCB while the PCB is plugged in.
\ No newline at end of file diff --git a/keyboards/mechlovin/jay60/readme.md b/keyboards/mechlovin/jay60/readme.md index 79867e5503..81f5ae6ed7 100644 --- a/keyboards/mechlovin/jay60/readme.md +++ b/keyboards/mechlovin/jay60/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mechlovin/kay60/readme.md b/keyboards/mechlovin/kay60/readme.md index cc53c13175..16c8414b34 100644 --- a/keyboards/mechlovin/kay60/readme.md +++ b/keyboards/mechlovin/kay60/readme.md @@ -22,5 +22,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Physic button**: Press reset swith on the bottom of the PCB diff --git a/keyboards/mechlovin/kay65/readme.md b/keyboards/mechlovin/kay65/readme.md index 768ce12aa7..d15317710f 100644 --- a/keyboards/mechlovin/kay65/readme.md +++ b/keyboards/mechlovin/kay65/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mechlovin/olly/bb/readme.md b/keyboards/mechlovin/olly/bb/readme.md index 0e41a3072f..6afdc161ea 100644 --- a/keyboards/mechlovin/olly/bb/readme.md +++ b/keyboards/mechlovin/olly/bb/readme.md @@ -19,5 +19,5 @@ Flashing example for this keyboard: See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). **Reset Key:** 2 ways to put the Olly JF into bootloader: -By keycode: Tap RESET keycode. +By keycode: Press the key mapped to `QK_BOOT` if it is available. By bootloader: hold ESC key while plugging in
\ No newline at end of file diff --git a/keyboards/mechlovin/olly/jf/readme.md b/keyboards/mechlovin/olly/jf/readme.md index 6a6bbc415a..fe9cf38cad 100644 --- a/keyboards/mechlovin/olly/jf/readme.md +++ b/keyboards/mechlovin/olly/jf/readme.md @@ -19,6 +19,6 @@ Flashing example for this keyboard: See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). **Reset Key:** 3 ways to put the Olly JF into bootloader: -By keycode: Tap RESET keycode. +By keycode: Press the key mapped to `QK_BOOT` if it is available. By Bootloader: hold ESC key while plugging in (jump to bootloader) By Bootmagic: hold Insert key while pluging in (jump to bootloader and reset EEPROM)
\ No newline at end of file diff --git a/keyboards/mechlovin/zed60/readme.md b/keyboards/mechlovin/zed60/readme.md index f740a421a8..d2e76ff55c 100644 --- a/keyboards/mechlovin/zed60/readme.md +++ b/keyboards/mechlovin/zed60/readme.md @@ -21,7 +21,7 @@ Enter the bootloader in 4 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * **Bootloader**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechwild/bbs/readme.md b/keyboards/mechwild/bbs/readme.md index b13e8fb54e..530717b800 100644 --- a/keyboards/mechwild/bbs/readme.md +++ b/keyboards/mechwild/bbs/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it. * **Physical reset button**: Press and hold the boot0 button on the blackpill, tap and release the nrst button on the blackpill, then release the boot0 button. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. diff --git a/keyboards/mechwild/mokulua/readme.md b/keyboards/mechwild/mokulua/readme.md index a8f2b055df..24f01b10d4 100644 --- a/keyboards/mechwild/mokulua/readme.md +++ b/keyboards/mechwild/mokulua/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file diff --git a/keyboards/mechwild/puckbuddy/readme.md b/keyboards/mechwild/puckbuddy/readme.md index 1663ad4b9c..3bf6647932 100644 --- a/keyboards/mechwild/puckbuddy/readme.md +++ b/keyboards/mechwild/puckbuddy/readme.md @@ -22,6 +22,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it. * **Physical reset button**: Press and hold the boot0 button on the blackpill, tap and release the nrst button on the blackpill, then release the boot0 button. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. By default this is the top right key on layer 1. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. By default this is the top right key on layer 1. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/melgeek/mach80/readme.md b/keyboards/melgeek/mach80/readme.md index f4c8572c4d..376d179c65 100755 --- a/keyboards/melgeek/mach80/readme.md +++ b/keyboards/melgeek/mach80/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead * -**Keycode in layout**: Press the key mapped to `RESET` if it is available * +**Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/melgeek/tegic/readme.md b/keyboards/melgeek/tegic/readme.md index da2698e412..f6676e1ce4 100755 --- a/keyboards/melgeek/tegic/readme.md +++ b/keyboards/melgeek/tegic/readme.md @@ -18,6 +18,6 @@ Enter the bootloader in 3 ways: **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead * -**Keycode in layout**: Press the key mapped to `RESET` if it is available * +**Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/meow65/readme.md b/keyboards/meow65/readme.md index 734a278082..1fe52c3e36 100644 --- a/keyboards/meow65/readme.md +++ b/keyboards/meow65/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down ESC key (the top left key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/merge/um80/readme.md b/keyboards/merge/um80/readme.md index fe4c5e8392..ad9caf244f 100644 --- a/keyboards/merge/um80/readme.md +++ b/keyboards/merge/um80/readme.md @@ -19,4 +19,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the Esc key on the left side or '7' key on the right side and plug in the keyboard. * **Physical reset button**: Briefly press the button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available.
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.
\ No newline at end of file diff --git a/keyboards/mikeneko65/readme.md b/keyboards/mikeneko65/readme.md index c14889da70..4b70fe18a3 100644 --- a/keyboards/mikeneko65/readme.md +++ b/keyboards/mikeneko65/readme.md @@ -18,6 +18,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ぶSee the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mincedshon/ecila/readme.md b/keyboards/mincedshon/ecila/readme.md index f7bc47edec..fcea170710 100644 --- a/keyboards/mincedshon/ecila/readme.md +++ b/keyboards/mincedshon/ecila/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mino/readme.md b/keyboards/mino/readme.md index a6a725b2a0..e13718b86c 100644 --- a/keyboards/mino/readme.md +++ b/keyboards/mino/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. For the default keymap it is the middle spacebar on the second layer. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. For the default keymap it is the middle spacebar on the second layer. Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/ml/gas75/readme.md b/keyboards/ml/gas75/readme.md index fcf5350384..8c5854e1d7 100644 --- a/keyboards/ml/gas75/readme.md +++ b/keyboards/ml/gas75/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Esc key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mmkzoo65/readme.md b/keyboards/mmkzoo65/readme.md index 96a699769a..967201ddc1 100644 --- a/keyboards/mmkzoo65/readme.md +++ b/keyboards/mmkzoo65/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mntre/readme.md b/keyboards/mntre/readme.md index 4c827aeb25..685a140892 100644 --- a/keyboards/mntre/readme.md +++ b/keyboards/mntre/readme.md @@ -23,5 +23,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the "Esc" key and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (default: "Circle" + "R") +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (default: "Circle" + "R") * **Physical reset button**: Remove the keyboard’s frame and toggle the programming DIP switch SW84 on the keyboard to “ON”. Then press the reset button SW83. diff --git a/keyboards/mode/m80v1/readme.md b/keyboards/mode/m80v1/readme.md index 5435a02e61..558204b5b7 100644 --- a/keyboards/mode/m80v1/readme.md +++ b/keyboards/mode/m80v1/readme.md @@ -17,7 +17,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ## Compile firmware diff --git a/keyboards/mode/m80v2/readme.md b/keyboards/mode/m80v2/readme.md index e94984f06b..b5ea62ec27 100644 --- a/keyboards/mode/m80v2/readme.md +++ b/keyboards/mode/m80v2/readme.md @@ -17,7 +17,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ## Compile firmware diff --git a/keyboards/monoflex60/readme.md b/keyboards/monoflex60/readme.md index cfb4e31d15..62b609e7c4 100644 --- a/keyboards/monoflex60/readme.md +++ b/keyboards/monoflex60/readme.md @@ -25,5 +25,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* Keycode in layout: Press the key mapped to RESET if it is available +* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available * Physical reset button: Press the button on the back of the PCB diff --git a/keyboards/morizon/readme.md b/keyboards/morizon/readme.md index 5c95e9788c..9c509d41ba 100644 --- a/keyboards/morizon/readme.md +++ b/keyboards/morizon/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key and plug in the keyboard. * **Physical reset button**: Briefly press the button on the top center of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. diff --git a/keyboards/ms_sculpt/readme.md b/keyboards/ms_sculpt/readme.md index c490234de6..45db8173b2 100644 --- a/keyboards/ms_sculpt/readme.md +++ b/keyboards/ms_sculpt/readme.md @@ -22,6 +22,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mss_studio/m63_rgb/readme.md b/keyboards/mss_studio/m63_rgb/readme.md index 942b7a60a6..33e4f58221 100644 --- a/keyboards/mss_studio/m63_rgb/readme.md +++ b/keyboards/mss_studio/m63_rgb/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Esc key) and plug in the keyboard * **Physical reset button**: Press and hold the button on the back of the PCB, then plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mss_studio/m64_rgb/readme.md b/keyboards/mss_studio/m64_rgb/readme.md index 1925622b9c..360720b584 100644 --- a/keyboards/mss_studio/m64_rgb/readme.md +++ b/keyboards/mss_studio/m64_rgb/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Esc key) and plug in the keyboard * **Physical reset button**: Press and hold the button on the back of the PCB, then plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mwstudio/alicekk/readme.md b/keyboards/mwstudio/alicekk/readme.md index f37629e7bb..9123a28c40 100644 --- a/keyboards/mwstudio/alicekk/readme.md +++ b/keyboards/mwstudio/alicekk/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mwstudio/mw65_black/readme.md b/keyboards/mwstudio/mw65_black/readme.md index 4127469019..90698c9864 100644 --- a/keyboards/mwstudio/mw65_black/readme.md +++ b/keyboards/mwstudio/mw65_black/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mwstudio/mw65_rgb/readme.md b/keyboards/mwstudio/mw65_rgb/readme.md index e15b5f9de9..4beb6bd3f5 100644 --- a/keyboards/mwstudio/mw65_rgb/readme.md +++ b/keyboards/mwstudio/mw65_rgb/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mwstudio/mw75/readme.md b/keyboards/mwstudio/mw75/readme.md index ecabf568aa..8f946a119f 100644 --- a/keyboards/mwstudio/mw75/readme.md +++ b/keyboards/mwstudio/mw75/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/mwstudio/mw75r2/readme.md b/keyboards/mwstudio/mw75r2/readme.md index ef2efb3734..5492352b2b 100644 --- a/keyboards/mwstudio/mw75r2/readme.md +++ b/keyboards/mwstudio/mw75r2/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader * **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware -* **Keycode in layout**: Press the key mapped to RESET if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/nacly/sodium42/readme.md b/keyboards/nacly/sodium42/readme.md index 8e44f510ec..2e8cc02774 100644 --- a/keyboards/nacly/sodium42/readme.md +++ b/keyboards/nacly/sodium42/readme.md @@ -15,6 +15,6 @@ Make example for this keyboard (after setting up your build environment): Enter the bootloader in 2 ways: * **Physical reset button**: Press the reset button twice -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/nacly/sodium50/readme.md b/keyboards/nacly/sodium50/readme.md index 8cd5e10e20..3b41d96b9c 100644 --- a/keyboards/nacly/sodium50/readme.md +++ b/keyboards/nacly/sodium50/readme.md @@ -15,6 +15,6 @@ Make example for this keyboard (after setting up your build environment): Enter the bootloader in 2 ways: * **Physical reset button**: Press the reset button twice -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/nacly/sodium62/readme.md b/keyboards/nacly/sodium62/readme.md index 315f6cd987..1f600a50c6 100644 --- a/keyboards/nacly/sodium62/readme.md +++ b/keyboards/nacly/sodium62/readme.md @@ -15,7 +15,7 @@ Make example for this keyboard (after setting up your build environment): Enter the bootloader in 2 ways: * **Physical reset button**: Press the reset button twice -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/neopad/readme.md b/keyboards/neopad/readme.md index 9e83e9bb6d..6d2bd8a288 100644 --- a/keyboards/neopad/readme.md +++ b/keyboards/neopad/readme.md @@ -19,7 +19,7 @@ Flashing example for this keyboard: make neopad/rev1:default:flash -When asked by the terminal, press the dedicated `RESET` button (the one above the 2 LEDs) to enter the bootloader and let the OS detects the device. +When asked by the terminal, press the dedicated `QK_BOOT` button (the one above the 2 LEDs) to enter the bootloader and let the OS detects the device. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/neson_design/700e/readme.md b/keyboards/neson_design/700e/readme.md index 902b0709ff..8b25d00c25 100644 --- a/keyboards/neson_design/700e/readme.md +++ b/keyboards/neson_design/700e/readme.md @@ -18,4 +18,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. * **Physical reset button**: Briefly press the *RST* button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available.
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.
\ No newline at end of file diff --git a/keyboards/neson_design/n6/readme.md b/keyboards/neson_design/n6/readme.md index 81ba05be49..f86668549a 100644 --- a/keyboards/neson_design/n6/readme.md +++ b/keyboards/neson_design/n6/readme.md @@ -18,4 +18,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. * **Physical reset button**: Briefly press the *RST* button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available.
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.
\ No newline at end of file diff --git a/keyboards/nix_studio/n60_a/readme.md b/keyboards/nix_studio/n60_a/readme.md index d16d269499..5a3beb0ee8 100644 --- a/keyboards/nix_studio/n60_a/readme.md +++ b/keyboards/nix_studio/n60_a/readme.md @@ -16,6 +16,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/noxary/valhalla/readme.md b/keyboards/noxary/valhalla/readme.md index ac053df874..36e3403dae 100644 --- a/keyboards/noxary/valhalla/readme.md +++ b/keyboards/noxary/valhalla/readme.md @@ -17,7 +17,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Compile firmware diff --git a/keyboards/nullbitsco/tidbit/readme.md b/keyboards/nullbitsco/tidbit/readme.md index f2d0d9934b..d41ad039c3 100644 --- a/keyboards/nullbitsco/tidbit/readme.md +++ b/keyboards/nullbitsco/tidbit/readme.md @@ -17,7 +17,7 @@ Adds experimental "Remote Keyboard" functionality, which forwards keystrokes fro Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/onekeyco/dango40/readme.md b/keyboards/onekeyco/dango40/readme.md index 4b12f55957..870ba74676 100644 --- a/keyboards/onekeyco/dango40/readme.md +++ b/keyboards/onekeyco/dango40/readme.md @@ -9,7 +9,7 @@ ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead - * **Keycode in layout**: Press the key mapped to `RESET` if it is available + * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for flashing this keyboard (after setting up your build environment): diff --git a/keyboards/papercranekeyboards/gerald65/readme.md b/keyboards/papercranekeyboards/gerald65/readme.md index 2dafff9e20..0bc610dd11 100644 --- a/keyboards/papercranekeyboards/gerald65/readme.md +++ b/keyboards/papercranekeyboards/gerald65/readme.md @@ -22,6 +22,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB (located in the center) -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. To do this, hold down the key to the right of the left spacebar (1u key in the center of bottom row), and then also press the key in the top right (by default, the delete key). +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. To do this, hold down the key to the right of the left spacebar (1u key in the center of bottom row), and then also press the key in the top right (by default, the delete key). See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/paprikman/albacore/readme.md b/keyboards/paprikman/albacore/readme.md index 57c113d42b..b8dacee6d7 100644 --- a/keyboards/paprikman/albacore/readme.md +++ b/keyboards/paprikman/albacore/readme.md @@ -21,6 +21,6 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader There are several ways to enter the bootloader: -* **Using keycode**: Press the `RESET` key (if mapped) +* **Using keycode**: Press the `QK_BOOT` key (if mapped) * **Bootmagic reset**: Hold the left bottom key (default mod key) and plug the usb cable * **Physical reset**: In the top right corner of the bottom part of the pcb you will find two pads. Shorten them with tweezers and plug the usb cable, then release. It is also possible to shorten these pads while the macropad is already connected (shorten and hold for a couple of seconds, then release). diff --git a/keyboards/pearlboards/atlas/readme.md b/keyboards/pearlboards/atlas/readme.md index ac02df971b..5161dd2a55 100644 --- a/keyboards/pearlboards/atlas/readme.md +++ b/keyboards/pearlboards/atlas/readme.md @@ -18,5 +18,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: -* **Physical reset button**: Briefly press the button on the back of the PCB labeled "RESET" -* **Keycode in layout**: Press the key mapped to `RESET` in conjunction with the key mapped to `MO(1))` +* **Physical reset button**: Briefly press the button on the back of the PCB labeled "QK_BOOT" +* **Keycode in layout**: Press the key mapped to `QK_BOOT` in conjunction with the key mapped to `MO(1))` diff --git a/keyboards/pearlboards/pearl/readme.md b/keyboards/pearlboards/pearl/readme.md index 7679b270b3..e12d59c8b0 100644 --- a/keyboards/pearlboards/pearl/readme.md +++ b/keyboards/pearlboards/pearl/readme.md @@ -18,5 +18,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: -* **Physical reset button**: Briefly press the button on the front left of the PCB labeled "RESET" -* **Keycode in layout**: Press the key mapped to `RESET` in conjunction with the key mapped to `MO(1))` +* **Physical reset button**: Briefly press the button on the front left of the PCB labeled "QK_BOOT" +* **Keycode in layout**: Press the key mapped to `QK_BOOT` in conjunction with the key mapped to `MO(1))` diff --git a/keyboards/pearlboards/zeus/readme.md b/keyboards/pearlboards/zeus/readme.md index 9d85549d3b..2db71d3c64 100644 --- a/keyboards/pearlboards/zeus/readme.md +++ b/keyboards/pearlboards/zeus/readme.md @@ -18,5 +18,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: -* **Physical reset button**: Briefly press the button on the back of the PCB labeled "RESET" -* **Keycode in layout**: Press the key mapped to `RESET` in conjunction with the key mapped to `MO(1))` +* **Physical reset button**: Briefly press the button on the back of the PCB labeled "QK_BOOT" +* **Keycode in layout**: Press the key mapped to `QK_BOOT` in conjunction with the key mapped to `MO(1))` diff --git a/keyboards/pearlboards/zeuspad/readme.md b/keyboards/pearlboards/zeuspad/readme.md index e22f48e65a..690af89b79 100644 --- a/keyboards/pearlboards/zeuspad/readme.md +++ b/keyboards/pearlboards/zeuspad/readme.md @@ -18,5 +18,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: -* **Physical reset button**: Briefly press the button on the front of the PCB labeled "RESET" -* **Keycode in layout**: Press the key mapped to `RESET` in conjunction with the key mapped to `MO(1))` +* **Physical reset button**: Briefly press the button on the front of the PCB labeled "QK_BOOT" +* **Keycode in layout**: Press the key mapped to `QK_BOOT` in conjunction with the key mapped to `MO(1))` diff --git a/keyboards/pegasus/readme.md b/keyboards/pegasus/readme.md index d164ba47ac..c523c03540 100644 --- a/keyboards/pegasus/readme.md +++ b/keyboards/pegasus/readme.md @@ -20,4 +20,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/pierce/readme.md b/keyboards/pierce/readme.md index 351bacbfa0..be7ba1948b 100644 --- a/keyboards/pierce/readme.md +++ b/keyboards/pierce/readme.md @@ -24,4 +24,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the dongle / wired half -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/pixelspace/capsule65i/readme.md b/keyboards/pixelspace/capsule65i/readme.md index 57587ae749..a07acf24c8 100644 --- a/keyboards/pixelspace/capsule65i/readme.md +++ b/keyboards/pixelspace/capsule65i/readme.md @@ -14,4 +14,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down esc in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` +* **Keycode in layout**: Press the key mapped to `QK_BOOT` diff --git a/keyboards/playkbtw/pk64rgb/readme.md b/keyboards/playkbtw/pk64rgb/readme.md index 29871af7a6..c5061bc0cc 100644 --- a/keyboards/playkbtw/pk64rgb/readme.md +++ b/keyboards/playkbtw/pk64rgb/readme.md @@ -18,7 +18,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available You can get into bootloader by pressing the reset button from the back of PCB. diff --git a/keyboards/polycarbdiet/s20/readme.md b/keyboards/polycarbdiet/s20/readme.md index 7eb2927716..e40f999a1c 100644 --- a/keyboards/polycarbdiet/s20/readme.md +++ b/keyboards/polycarbdiet/s20/readme.md @@ -17,11 +17,11 @@ Flashing example for this keyboard: make polycarbdiet/s20:default:flash **Reset Method:** -- Press the `RESET` button on the under side of the PCB +- Press the `QK_BOOT` button on the under side of the PCB **Bootloader Method:** - Hold down the key located at `K00`, commonly programmed as `ESC`, while plugging in the keyboard. -- Hold down the key located at `K00`, commonly programmed as `ESC`, and press the RESET button on the PCB. +- Hold down the key located at `K00`, commonly programmed as `ESC`, and press the QK_BOOT button on the PCB. - Hold down the key located at `K42` and then press the key located at `K40`. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/primekb/meridian/readme.md b/keyboards/primekb/meridian/readme.md index 01df9c5ba3..8e95ae263d 100644 --- a/keyboards/primekb/meridian/readme.md +++ b/keyboards/primekb/meridian/readme.md @@ -13,7 +13,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually Escape) and plug in the keyboard; or * **Physical reset button**: press the button on the bottom of the PCB; or -* **Keycode in layout**: press the key mapped to `RESET` if it is available (Escape key on layer 1 in the default layout). +* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (Escape key on layer 1 in the default layout). ### Compile firmware diff --git a/keyboards/primekb/meridian_rgb/readme.md b/keyboards/primekb/meridian_rgb/readme.md index d07752ae3d..52457c4f47 100644 --- a/keyboards/primekb/meridian_rgb/readme.md +++ b/keyboards/primekb/meridian_rgb/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * Physical reset button: Briefly press the button on the back of the PCB -* Keycode in layout: Press the key mapped to RESET if it is available +* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/projectkb/signature65/readme.md b/keyboards/projectkb/signature65/readme.md index 81fd434ff4..b6566f0ceb 100644 --- a/keyboards/projectkb/signature65/readme.md +++ b/keyboards/projectkb/signature65/readme.md @@ -17,4 +17,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset switch/button**: Set the dipswitch to the "on" position. Briefly press the button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. diff --git a/keyboards/psuieee/pluto12/readme.md b/keyboards/psuieee/pluto12/readme.md index bfdafb3b2d..d75f768b41 100644 --- a/keyboards/psuieee/pluto12/readme.md +++ b/keyboards/psuieee/pluto12/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/qpockets/wanten/readme.md b/keyboards/qpockets/wanten/readme.md index 243e949f34..5215a7d782 100644 --- a/keyboards/qpockets/wanten/readme.md +++ b/keyboards/qpockets/wanten/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key or encoder) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/rad/readme.md b/keyboards/rad/readme.md index 3a0fc76230..81254ad69e 100644 --- a/keyboards/rad/readme.md +++ b/keyboards/rad/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,2) in the matrix (top right) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/ramonimbao/mona/v1_1/readme.md b/keyboards/ramonimbao/mona/v1_1/readme.md index b28fedd76c..17ae6012bd 100644 --- a/keyboards/ramonimbao/mona/v1_1/readme.md +++ b/keyboards/ramonimbao/mona/v1_1/readme.md @@ -7,7 +7,7 @@ A gummy-worm o-ring mount 60% marble keyboard. Now with ALPS/MX, Caps Lock LED, * Keyboard Maintainer: [Ramon Imbao](https://github.com/ramonimbao) * Hardware Supported: ATmega32u4 -To get to the bootloader, with the USB cable plugged in, press the `RESET` button on the back of the PCB. +To get to the bootloader, with the USB cable plugged in, press the `QK_BOOT` button on the back of the PCB. Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/ramonimbao/mona/v32a/readme.md b/keyboards/ramonimbao/mona/v32a/readme.md index 61a3deefaa..f9a730691f 100644 --- a/keyboards/ramonimbao/mona/v32a/readme.md +++ b/keyboards/ramonimbao/mona/v32a/readme.md @@ -7,7 +7,7 @@ A gummy-worm o-ring mount 60% marble keyboard. Now with ALPS/MX, Caps Lock LED, * Keyboard Maintainer: [Ramon Imbao](https://github.com/ramonimbao) * Hardware Supported: ATmega32A -To get to the bootloader, with the USB cable plugged in, press the `RESET` button on the back of the PCB. +To get to the bootloader, with the USB cable plugged in, press the `QK_BOOT` button on the back of the PCB. Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/ramonimbao/wete/v2/readme.md b/keyboards/ramonimbao/wete/v2/readme.md index 3b33c9bdaa..d99c611560 100644 --- a/keyboards/ramonimbao/wete/v2/readme.md +++ b/keyboards/ramonimbao/wete/v2/readme.md @@ -23,4 +23,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the upper left key and plug in the keyboard * **Physical reset button**: Briefly press the reset button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/redox/readme.md b/keyboards/redox/readme.md index 27333b518c..82b00d79f7 100644 --- a/keyboards/redox/readme.md +++ b/keyboards/redox/readme.md @@ -41,7 +41,7 @@ qmk flash ``` Enter the bootloader when prompted by doing one of the following: * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if you have a layout that has one. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if you have a layout that has one. The WS2812 driver is *untested* on the Proton C, but if you choose to use this feature, you will need to source 5v from the Proton's VUSB pin and not use the PCB's dedicated pin which will be 3v3 *and* follow the [documentation](https://docs.qmk.fm/#/ws2812_driver) to enable the correct driver settings. diff --git a/keyboards/reviung/reviung53/readme.md b/keyboards/reviung/reviung53/readme.md index a2bfbcdbc2..2e0ed27e16 100644 --- a/keyboards/reviung/reviung53/readme.md +++ b/keyboards/reviung/reviung53/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/rgbkb/sol3/readme.md b/keyboards/rgbkb/sol3/readme.md index c896f7c0cd..8d799bd926 100644 --- a/keyboards/rgbkb/sol3/readme.md +++ b/keyboards/rgbkb/sol3/readme.md @@ -22,5 +22,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to To reset the board into bootloader mode, do one of the following: -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (Adjust + R by default) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (Adjust + R by default) * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard (also erases persistent settings) diff --git a/keyboards/ryanskidmore/rskeys100/readme.md b/keyboards/ryanskidmore/rskeys100/readme.md index 4be465dbde..3100e74f2d 100644 --- a/keyboards/ryanskidmore/rskeys100/readme.md +++ b/keyboards/ryanskidmore/rskeys100/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader -To enter the bootloader, press the `RESET` button on your daughterboard PCB while it's plugged in.
\ No newline at end of file +To enter the bootloader, press the `QK_BOOT` button on your daughterboard PCB while it's plugged in.
\ No newline at end of file diff --git a/keyboards/ryloo_studio/m0110/readme.md b/keyboards/ryloo_studio/m0110/readme.md index 78a59f0e62..8729ef6319 100755 --- a/keyboards/ryloo_studio/m0110/readme.md +++ b/keyboards/ryloo_studio/m0110/readme.md @@ -16,9 +16,9 @@ Flashing example for this keyboard: Putting the Keyboard in Bootloader Mode: -The shipped PCB did not come with a reset button. To put the PCB in bootloader mode: locate the 2 `RESET` pins in the back of the PCB and short them with a conductive wire or tweezer. +The shipped PCB did not come with a reset button. To put the PCB in bootloader mode: locate the 2 `QK_BOOT` pins in the back of the PCB and short them with a conductive wire or tweezer. - + See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/s_ol/0xc_pad/readme.md b/keyboards/s_ol/0xc_pad/readme.md index 8ca3f78d1a..b9e75b02e9 100644 --- a/keyboards/s_ol/0xc_pad/readme.md +++ b/keyboards/s_ol/0xc_pad/readme.md @@ -18,7 +18,7 @@ following means: - holding down the top-left key (next to the USB port) while plugging it in - bridging the two pads labeled `BOOT` on the back of the PCB with a metallic object (tweezers, paperclip. wire) -- putting the `RESET` keycode in your keymap and pressing the corresponding key +- putting the `QK_BOOT` keycode in your keymap and pressing the corresponding key See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sandwich/keeb68/readme.md b/keyboards/sandwich/keeb68/readme.md index 783d8f00b7..0c877fdc24 100644 --- a/keyboards/sandwich/keeb68/readme.md +++ b/keyboards/sandwich/keeb68/readme.md @@ -23,7 +23,7 @@ Some BIOSs may not detect keypresses properly while NRKO is enabled according to Enter the bootloader in 2 ways (all keys assume default layout): -* **Keycode in layout**: Hold Fn key and press the Windows(GUI) key (mapped to `RESET`) +* **Keycode in layout**: Hold Fn key and press the Windows(GUI) key (mapped to `QK_BOOT`) * **Physical reset button**: Briefly press the button on the back of the PCB (labeled sw1) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sawnsprojects/amber80/readme.md b/keyboards/sawnsprojects/amber80/readme.md index bc5dd417fc..807ba0917f 100644 --- a/keyboards/sawnsprojects/amber80/readme.md +++ b/keyboards/sawnsprojects/amber80/readme.md @@ -20,6 +20,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/readme.md b/keyboards/sawnsprojects/amber80/solder/readme.md index a429328702..094169a224 100644 --- a/keyboards/sawnsprojects/amber80/solder/readme.md +++ b/keyboards/sawnsprojects/amber80/solder/readme.md @@ -19,6 +19,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sawnsprojects/krush/krush60/readme.md b/keyboards/sawnsprojects/krush/krush60/readme.md index 515040f904..6890329c35 100644 --- a/keyboards/sawnsprojects/krush/krush60/readme.md +++ b/keyboards/sawnsprojects/krush/krush60/readme.md @@ -20,6 +20,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/hotswap/readme.md b/keyboards/sawnsprojects/krush/krush65/hotswap/readme.md index 4a256a2ca5..9e2ae1735e 100644 --- a/keyboards/sawnsprojects/krush/krush65/hotswap/readme.md +++ b/keyboards/sawnsprojects/krush/krush65/hotswap/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/sawnsprojects/krush/krush65/readme.md b/keyboards/sawnsprojects/krush/krush65/readme.md index 34e996f0bf..cc2efdfcfe 100644 --- a/keyboards/sawnsprojects/krush/krush65/readme.md +++ b/keyboards/sawnsprojects/krush/krush65/readme.md @@ -20,6 +20,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/readme.md b/keyboards/sawnsprojects/vcl65/readme.md index 025c41badf..d47c145e79 100644 --- a/keyboards/sawnsprojects/vcl65/readme.md +++ b/keyboards/sawnsprojects/vcl65/readme.md @@ -20,6 +20,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/solder/readme.md b/keyboards/sawnsprojects/vcl65/solder/readme.md index 06b44ab730..b168e0e079 100644 --- a/keyboards/sawnsprojects/vcl65/solder/readme.md +++ b/keyboards/sawnsprojects/vcl65/solder/readme.md @@ -18,6 +18,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sets3n/kk980/readme.md b/keyboards/sets3n/kk980/readme.md index 0a1142e571..a238ae0524 100644 --- a/keyboards/sets3n/kk980/readme.md +++ b/keyboards/sets3n/kk980/readme.md @@ -14,7 +14,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## HEX diff --git a/keyboards/shapeshifter4060/readme.md b/keyboards/shapeshifter4060/readme.md index 2f134ce15b..d318502c20 100644 --- a/keyboards/shapeshifter4060/readme.md +++ b/keyboards/shapeshifter4060/readme.md @@ -26,7 +26,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: - **Physical reset button**: Briefly press the button on the top of the PCB -- **Keycode in layout**: Press the key mapped to `RESET` if it is available +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Changelog diff --git a/keyboards/skeletonkbd/skeletonnumpad/readme.md b/keyboards/skeletonkbd/skeletonnumpad/readme.md index fc67c79e54..538989277a 100644 --- a/keyboards/skeletonkbd/skeletonnumpad/readme.md +++ b/keyboards/skeletonkbd/skeletonnumpad/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: - **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard - **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -- **Keycode in layout**: Press the key mapped to `RESET` if it is available +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/skippys_custom_pcs/rooboard65/readme.md b/keyboards/skippys_custom_pcs/rooboard65/readme.md index 63f8217fc8..40a23ec12a 100644 --- a/keyboards/skippys_custom_pcs/rooboard65/readme.md +++ b/keyboards/skippys_custom_pcs/rooboard65/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file diff --git a/keyboards/skippys_custom_pcs/roopad/readme.md b/keyboards/skippys_custom_pcs/roopad/readme.md index e10cc9fb4f..89230ddcb1 100644 --- a/keyboards/skippys_custom_pcs/roopad/readme.md +++ b/keyboards/skippys_custom_pcs/roopad/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/skme/zeno/readme.md b/keyboards/skme/zeno/readme.md index 69a76b5734..0e71533a89 100644 --- a/keyboards/skme/zeno/readme.md +++ b/keyboards/skme/zeno/readme.md @@ -28,4 +28,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/smithrune/iron165r2/readme.md b/keyboards/smithrune/iron165r2/readme.md index 2fc913ff73..bc41ee4be2 100644 --- a/keyboards/smithrune/iron165r2/readme.md +++ b/keyboards/smithrune/iron165r2/readme.md @@ -18,7 +18,7 @@ The DFU state in the bootloader can be accessed in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key, escape in the default keymap) and plug in the keyboard; * **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds; -* **Keycode in layout**: Press the key mapped to `RESET`; in the default layout, that is top left key ('escape') in layer 1. +* **Keycode in layout**: Press the key mapped to `QK_BOOT`; in the default layout, that is top left key ('escape') in layer 1. ### How to compile and flash diff --git a/keyboards/splitography/readme.md b/keyboards/splitography/readme.md index eeb9b2f40d..39b09d8d8b 100644 --- a/keyboards/splitography/readme.md +++ b/keyboards/splitography/readme.md @@ -24,7 +24,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. * **Physical reset button**: Briefly press the button on the back of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. ## [Guide](https://softhruf.love/pages/guides) diff --git a/keyboards/star75/readme.md b/keyboards/star75/readme.md index 6d7b9b0577..5145dc9c47 100644 --- a/keyboards/star75/readme.md +++ b/keyboards/star75/readme.md @@ -24,5 +24,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/stello65/beta/readme.md b/keyboards/stello65/beta/readme.md index cb2f156ec2..67b183008a 100644 --- a/keyboards/stello65/beta/readme.md +++ b/keyboards/stello65/beta/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/stello65/hs_rev1/readme.md b/keyboards/stello65/hs_rev1/readme.md index 75f83b052c..b7f9e7c726 100644 --- a/keyboards/stello65/hs_rev1/readme.md +++ b/keyboards/stello65/hs_rev1/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/stello65/sl_rev1/readme.md b/keyboards/stello65/sl_rev1/readme.md index 027ab25a3a..ed36a4e740 100644 --- a/keyboards/stello65/sl_rev1/readme.md +++ b/keyboards/stello65/sl_rev1/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/studiokestra/bourgeau/readme.md b/keyboards/studiokestra/bourgeau/readme.md index 16f87618e0..b0a0bb2a89 100644 --- a/keyboards/studiokestra/bourgeau/readme.md +++ b/keyboards/studiokestra/bourgeau/readme.md @@ -11,7 +11,7 @@ Compact 75% universal hotswap PCB with USB-C that supports a fixed 6.25U bottom There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `ESC` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/cascade/readme.md b/keyboards/studiokestra/cascade/readme.md index db55844ed1..e217b3edea 100644 --- a/keyboards/studiokestra/cascade/readme.md +++ b/keyboards/studiokestra/cascade/readme.md @@ -11,7 +11,7 @@ There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `ESC` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/galatea/readme.md b/keyboards/studiokestra/galatea/readme.md index 1268c596bf..08a6eae011 100644 --- a/keyboards/studiokestra/galatea/readme.md +++ b/keyboards/studiokestra/galatea/readme.md @@ -13,7 +13,7 @@ TKL H87/88c compatible PCB with support for the most common layouts. There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `R` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/nue/readme.md b/keyboards/studiokestra/nue/readme.md index 42e72902e4..f29f27be22 100644 --- a/keyboards/studiokestra/nue/readme.md +++ b/keyboards/studiokestra/nue/readme.md @@ -11,7 +11,7 @@ There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `R` key. ## Compiling Firmware diff --git a/keyboards/subrezon/la_nc/readme.md b/keyboards/subrezon/la_nc/readme.md index 26a7b4d79a..7031b941fb 100644 --- a/keyboards/subrezon/la_nc/readme.md +++ b/keyboards/subrezon/la_nc/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/synapse/readme.md b/keyboards/synapse/readme.md index 1e4642881f..f98fee8e42 100644 --- a/keyboards/synapse/readme.md +++ b/keyboards/synapse/readme.md @@ -23,5 +23,5 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * diff --git a/keyboards/synthlabs/solo/readme.md b/keyboards/synthlabs/solo/readme.md index 204bc3857f..4e911cecc0 100644 --- a/keyboards/synthlabs/solo/readme.md +++ b/keyboards/synthlabs/solo/readme.md @@ -24,5 +24,5 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (1,1) in the matrix (the rotary encoder button) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available * diff --git a/keyboards/system76/launch_1/readme.md b/keyboards/system76/launch_1/readme.md index 1dcdeccc39..f012f86160 100644 --- a/keyboards/system76/launch_1/readme.md +++ b/keyboards/system76/launch_1/readme.md @@ -58,5 +58,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: - **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard. -- **Keycode in layout**: Press the key mapped to `RESET` in the second layer (Escape). +- **Keycode in layout**: Press the key mapped to `QK_BOOT` in the second layer (Escape). - **Electrical reset**: Briefly short AVR ISP's GND (6) and RST (5) pads on the back of the PCB. diff --git a/keyboards/takashicompany/center_enter/readme.md b/keyboards/takashicompany/center_enter/readme.md index d8db5cc7eb..1a7f16ac68 100644 --- a/keyboards/takashicompany/center_enter/readme.md +++ b/keyboards/takashicompany/center_enter/readme.md @@ -26,4 +26,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/compacx/readme.md b/keyboards/takashicompany/compacx/readme.md index ac5cfee169..6aca4b45f8 100644 --- a/keyboards/takashicompany/compacx/readme.md +++ b/keyboards/takashicompany/compacx/readme.md @@ -26,4 +26,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/dogtag/readme.md b/keyboards/takashicompany/dogtag/readme.md index a68ea6f53b..3947e4b807 100644 --- a/keyboards/takashicompany/dogtag/readme.md +++ b/keyboards/takashicompany/dogtag/readme.md @@ -34,4 +34,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/heavy_left/readme.md b/keyboards/takashicompany/heavy_left/readme.md index 4cd0e1b0cc..a048103f84 100644 --- a/keyboards/takashicompany/heavy_left/readme.md +++ b/keyboards/takashicompany/heavy_left/readme.md @@ -30,4 +30,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/minizone/readme.md b/keyboards/takashicompany/minizone/readme.md index 79f2fef7ad..04b6896d28 100644 --- a/keyboards/takashicompany/minizone/readme.md +++ b/keyboards/takashicompany/minizone/readme.md @@ -50,4 +50,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/qoolee/readme.md b/keyboards/takashicompany/qoolee/readme.md index 35ee431c1c..55fbff82a2 100644 --- a/keyboards/takashicompany/qoolee/readme.md +++ b/keyboards/takashicompany/qoolee/readme.md @@ -27,4 +27,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/radialex/readme.md b/keyboards/takashicompany/radialex/readme.md index 1468e7b0b1..2f723ba686 100644 --- a/keyboards/takashicompany/radialex/readme.md +++ b/keyboards/takashicompany/radialex/readme.md @@ -28,4 +28,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/takashicompany/spreadwriter/readme.md b/keyboards/takashicompany/spreadwriter/readme.md index 972dcba4de..3cf6eccb50 100644 --- a/keyboards/takashicompany/spreadwriter/readme.md +++ b/keyboards/takashicompany/spreadwriter/readme.md @@ -32,4 +32,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/teleport/numpad/readme.md b/keyboards/teleport/numpad/readme.md index aebde6f160..20975b6947 100644 --- a/keyboards/teleport/numpad/readme.md +++ b/keyboards/teleport/numpad/readme.md @@ -17,4 +17,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (In this case NumLock) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` (With the default keymap, hold NumLock, then press Enter)
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` (With the default keymap, hold NumLock, then press Enter)
\ No newline at end of file diff --git a/keyboards/tkw/grandiceps/readme.md b/keyboards/tkw/grandiceps/readme.md index 57a6dac28d..899d0b462d 100644 --- a/keyboards/tkw/grandiceps/readme.md +++ b/keyboards/tkw/grandiceps/readme.md @@ -30,4 +30,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset buttons**: Hold down the BOOT0 button and then briefly press the NRST button on the BlackPill PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/tominabox1/adalyn/readme.md b/keyboards/tominabox1/adalyn/readme.md index d6292b5cad..ee4d59bcfa 100644 --- a/keyboards/tominabox1/adalyn/readme.md +++ b/keyboards/tominabox1/adalyn/readme.md @@ -16,4 +16,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/tominabox1/littlefoot_lx/readme.md b/keyboards/tominabox1/littlefoot_lx/readme.md index 5ef9186347..161c158637 100644 --- a/keyboards/tominabox1/littlefoot_lx/readme.md +++ b/keyboards/tominabox1/littlefoot_lx/readme.md @@ -27,4 +27,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/vertex/angler2/readme.md b/keyboards/vertex/angler2/readme.md index e0b054fbb0..e3de551e37 100644 --- a/keyboards/vertex/angler2/readme.md +++ b/keyboards/vertex/angler2/readme.md @@ -14,4 +14,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down esc in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` +* **Keycode in layout**: Press the key mapped to `QK_BOOT` diff --git a/keyboards/vertex/arc60/readme.md b/keyboards/vertex/arc60/readme.md index e5b743332e..4c8968de62 100644 --- a/keyboards/vertex/arc60/readme.md +++ b/keyboards/vertex/arc60/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down Enter in the keyboard then replug * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` +* **Keycode in layout**: Press the key mapped to `QK_BOOT` diff --git a/keyboards/viendi8l/readme.md b/keyboards/viendi8l/readme.md index 881300fd83..12b3c5adc7 100644 --- a/keyboards/viendi8l/readme.md +++ b/keyboards/viendi8l/readme.md @@ -14,7 +14,7 @@ The 8L 80% (60% plus southpaw numpad) keyboard designed by Viendi, with PCB by G * **Bootmagic reset**: hold down the key at (0,0) in the matrix (the encoder push) and plug in the keyboard, waiting for five seconds * **Physical reset button**: press the button on the front of the PCB or use pliers to short the reset contacts, for at least five seconds -* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) +* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout) ## Compile firmware diff --git a/keyboards/viktus/smolka/readme.md b/keyboards/viktus/smolka/readme.md index d01a729ef0..8c364c36f6 100644 --- a/keyboards/viktus/smolka/readme.md +++ b/keyboards/viktus/smolka/readme.md @@ -27,4 +27,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (1,0) in the matrix (the top key in the macro column) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/wavtype/foundation/readme.md b/keyboards/wavtype/foundation/readme.md index 69f9bd3a0d..68ad269d07 100644 --- a/keyboards/wavtype/foundation/readme.md +++ b/keyboards/wavtype/foundation/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,1) in the matrix (Escape key) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to RESET if it is available (by default this is set to "Fn + R")
\ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (by default this is set to "Fn + R")
\ No newline at end of file diff --git a/keyboards/wavtype/p01_ultra/readme.md b/keyboards/wavtype/p01_ultra/readme.md index 69bdba5e7c..bb90389227 100644 --- a/keyboards/wavtype/p01_ultra/readme.md +++ b/keyboards/wavtype/p01_ultra/readme.md @@ -20,4 +20,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (this can be set in vial!) +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (this can be set in vial!) diff --git a/keyboards/wekey/polaris/readme.md b/keyboards/wekey/polaris/readme.md index 40fcf65bb6..7810b112ee 100644 --- a/keyboards/wekey/polaris/readme.md +++ b/keyboards/wekey/polaris/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/wilba_tech/wt65_d/readme.md b/keyboards/wilba_tech/wt65_d/readme.md index 527a824ad1..bbd3bbff81 100644 --- a/keyboards/wilba_tech/wt65_d/readme.md +++ b/keyboards/wilba_tech/wt65_d/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/winry/winry315/readme.md b/keyboards/winry/winry315/readme.md index 099e6b42b4..48b311e12a 100644 --- a/keyboards/winry/winry315/readme.md +++ b/keyboards/winry/winry315/readme.md @@ -29,7 +29,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top left key (not the encoder) and plug in the keyboard. This apparently also works with the vendor VIA firmware. * Note that the bootmagic key does not change with the board orientation configured using `WINRY315_DEFAULT_ORIENTATION` — the “top left” key position in the default orientation (encoders on the top side) is always used. * **Physical reset button**: Briefly press the button on the back of the PCB (the acrylic bottom cover should have a hole to access that button). -* **Keycode in layout**: Press the key mapped to `RESET` if it is available (the default keymap does not have that keycode assigned to any key, but you can use that keycode in your custom keymap if you want to have easier access to the bootloader). +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (the default keymap does not have that keycode assigned to any key, but you can use that keycode in your custom keymap if you want to have easier access to the bootloader). ## Orientation diff --git a/keyboards/wolf/kuku65/readme.md b/keyboards/wolf/kuku65/readme.md index 34c4f33422..6cb263a118 100644 --- a/keyboards/wolf/kuku65/readme.md +++ b/keyboards/wolf/kuku65/readme.md @@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/wolf/ryujin/readme.md b/keyboards/wolf/ryujin/readme.md index bc9713563a..3f0e0a35e9 100644 --- a/keyboards/wolf/ryujin/readme.md +++ b/keyboards/wolf/ryujin/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/wolf/sabre/readme.md b/keyboards/wolf/sabre/readme.md index b06217d0ee..694b3e584a 100644 --- a/keyboards/wolf/sabre/readme.md +++ b/keyboards/wolf/sabre/readme.md @@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `QK_BOOT` diff --git a/keyboards/wolf/ts60/readme.md b/keyboards/wolf/ts60/readme.md index 6883617cb1..5f1d64937b 100644 --- a/keyboards/wolf/ts60/readme.md +++ b/keyboards/wolf/ts60/readme.md @@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the Enter key on layer 1 which is mapped to `RESET`
\ No newline at end of file +* **Keycode in layout**: Press the Enter key on layer 1 which is mapped to `QK_BOOT`
\ No newline at end of file diff --git a/keyboards/wren/readme.md b/keyboards/wren/readme.md index 8de95734d6..233a74d489 100644 --- a/keyboards/wren/readme.md +++ b/keyboards/wren/readme.md @@ -24,4 +24,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the front of the PCB below the microcontroler -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/yandrstudio/nz64/readme.md b/keyboards/yandrstudio/nz64/readme.md index ca52d65ee9..f495839aa3 100644 --- a/keyboards/yandrstudio/nz64/readme.md +++ b/keyboards/yandrstudio/nz64/readme.md @@ -19,4 +19,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key which is Escape in this keyboard) and plug in the keyboard * **Physical reset pins**: Short circuit the `bt0` and `vcc` pins on the back of the PCB and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. diff --git a/keyboards/yandrstudio/zhou65/readme.md b/keyboards/yandrstudio/zhou65/readme.md index 31f57f2f96..802943ae39 100644 --- a/keyboards/yandrstudio/zhou65/readme.md +++ b/keyboards/yandrstudio/zhou65/readme.md @@ -19,4 +19,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key which is Escape in this keyboard) and plug in the keyboard * **Physical reset pins**: Short circuit the `bt0` and `vcc` pins on the back of the PCB and plug in the keyboard -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. diff --git a/keyboards/ydkb/just60/readme.md b/keyboards/ydkb/just60/readme.md index 1fe05bd3ea..76eee5dced 100644 --- a/keyboards/ydkb/just60/readme.md +++ b/keyboards/ydkb/just60/readme.md @@ -2,7 +2,7 @@ Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io. -To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`. +To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `QK_BOOT`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`. Backlight LEDs and Bluetooth are not working yet. diff --git a/keyboards/ymdk/ymd21/v2/readme.md b/keyboards/ymdk/ymd21/v2/readme.md index 8a7968e346..9ca3b1390f 100644 --- a/keyboards/ymdk/ymd21/v2/readme.md +++ b/keyboards/ymdk/ymd21/v2/readme.md @@ -22,6 +22,6 @@ Enter the bootloader using one of the following methods: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/yushakobo/navpad/10/readme.md b/keyboards/yushakobo/navpad/10/readme.md index a330003a55..231e449721 100644 --- a/keyboards/yushakobo/navpad/10/readme.md +++ b/keyboards/yushakobo/navpad/10/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/yushakobo/navpad/10_helix_r/readme.md b/keyboards/yushakobo/navpad/10_helix_r/readme.md index 99fa83c62d..6d8a64c2bc 100644 --- a/keyboards/yushakobo/navpad/10_helix_r/readme.md +++ b/keyboards/yushakobo/navpad/10_helix_r/readme.md @@ -30,4 +30,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/ziggurat/readme.md b/keyboards/ziggurat/readme.md index 85f88b5361..0b1330fcd4 100644 --- a/keyboards/ziggurat/readme.md +++ b/keyboards/ziggurat/readme.md @@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top left key and plug in the keyboard * **Physical reset button**: Press the button labeled "SW1" on the back of the PCB -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |