diff options
Diffstat (limited to 'keyboards')
184 files changed, 11385 insertions, 651 deletions
diff --git a/keyboards/atreus/keymaps/default/keymap.c b/keyboards/atreus/keymaps/default/keymap.c index 04ad66fed8..ce92e89c9c 100644 --- a/keyboards/atreus/keymaps/default/keymap.c +++ b/keyboards/atreus/keymaps/default/keymap.c @@ -15,8 +15,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QW] = { /* Qwerty */ {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P }, {KC_A, KC_S, KC_D, KC_F, KC_G, KC_TRNS, KC_H, KC_J, KC_K, KC_L, KC_SCLN }, - {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH }, - {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT } + {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCTL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH }, + {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LALT, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT } }, /* * ! @ up { } || pgup 7 8 9 * @@ -27,8 +27,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_RS] = { /* [> RAISE <] */ {KC_EXLM, KC_AT, KC_UP, KC_LCBR, KC_RCBR, KC_TRNS, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR}, {KC_HASH, KC_LEFT, KC_DOWN, KC_RGHT, KC_DLR, KC_TRNS, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS}, - {KC_LBRC, KC_RBRC, KC_LPRN, KC_RPRN, KC_AMPR, KC_LALT, KC_GRV, KC_1, KC_2, KC_3, KC_BSLS}, - {TG(_LW), KC_INS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL} + {KC_LBRC, KC_RBRC, KC_LPRN, KC_RPRN, KC_AMPR, KC_LCTL, KC_GRV, KC_1, KC_2, KC_3, KC_BSLS}, + {TG(_LW), KC_INS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL} }, /* * insert home up end pgup || up F7 F8 F9 F10 @@ -39,8 +39,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LW] = { /* [> LOWER <] */ {KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_TRNS, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10}, {KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_TRNS, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11}, - {KC_TRNS, KC_VOLU, KC_TRNS, KC_TRNS, RESET, KC_LALT, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F12}, - {KC_TRNS, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_SPC, DF(_QW), KC_PSCR, KC_SLCK, KC_PAUS} + {KC_TRNS, KC_VOLU, KC_TRNS, KC_TRNS, RESET, KC_LCTL, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F12}, + {KC_TRNS, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LALT, KC_SPC, DF(_QW), KC_PSCR, KC_SLCK, KC_PAUS} }}; const uint16_t PROGMEM fn_actions[] = { diff --git a/keyboards/atreus62/atreus62.h b/keyboards/atreus62/atreus62.h index eacf5b4513..ca5cda8a89 100644 --- a/keyboards/atreus62/atreus62.h +++ b/keyboards/atreus62/atreus62.h @@ -9,18 +9,34 @@ void promicro_bootloader_jmp(bool program); // The first section contains all of the arguements // The second converts the arguments into a two-dimensional array #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \ ) \ { \ - { k00, k01, k02, k03, k04, k05, KC_NO, k06, k07, k08, k09, k0a, k0b }, \ - { k10, k11, k12, k13, k14, k15, KC_NO, k16, k17, k18, k19, k1a, k1b }, \ - { k20, k21, k22, k23, k24, k25, KC_NO, k26, k27, k28, k29, k2a, k2b }, \ - { k30, k31, k32, k33, k34, k35, k46, k36, k37, k38, k39, k3a, k3b }, \ - { k40, k41, k42, k43, k44, k45, k47, k48, k49, k4a, k4b, k4c, k4d } \ + { k00, k01, k02, k03, k04, k05, KC_NO, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, KC_NO, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, KC_NO, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k46, k36, k37, k38, k39, k3a, k3b }, \ + { k40, k41, k42, k43, k44, k45, k47, k48, k49, k4a, k4b, k4c, k4d } \ } -#endif
\ No newline at end of file +// Used to create a keymap using only KC_ prefixed keys. +#define KC_KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \ +) \ +{ \ + { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_NO, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b }, \ + { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_NO, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b }, \ + { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_NO, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b }, \ + { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k46, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b }, \ + { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45, KC_##k47, KC_##k48, KC_##k49, KC_##k4a, KC_##k4b, KC_##k4c, KC_##k4d } \ +} + +#endif diff --git a/keyboards/clueboard/keymaps/caps_fn/keymap.c b/keyboards/clueboard/keymaps/caps_fn/keymap.c new file mode 100644 index 0000000000..7fad9c1b21 --- /dev/null +++ b/keyboards/clueboard/keymaps/caps_fn/keymap.c @@ -0,0 +1,86 @@ +#include "clueboard.h" + +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ + _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _CL: Control layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), +}; + +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), // Calls action_function() +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t mods_pressed; + static bool mod_flag; + + switch (id) { + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + + if (record->event.pressed) { + /* The key is being pressed. + */ + if (mods_pressed) { + mod_flag = true; + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + /* The key is being released. + */ + if (mod_flag) { + mod_flag = false; + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/caps_fn/layout.png b/keyboards/clueboard/keymaps/caps_fn/layout.png Binary files differnew file mode 100644 index 0000000000..a5bd57adbb --- /dev/null +++ b/keyboards/clueboard/keymaps/caps_fn/layout.png diff --git a/keyboards/clueboard/keymaps/caps_fn/readme.md b/keyboards/clueboard/keymaps/caps_fn/readme.md new file mode 100644 index 0000000000..74ad01fca8 --- /dev/null +++ b/keyboards/clueboard/keymaps/caps_fn/readme.md @@ -0,0 +1,15 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + + + +# Caps Fn Layout + +This is the default layout except that Caps Lock acts like Caps Lock when +tapped but Fn when held. diff --git a/keyboards/clueboard/keymaps/colemak/keymap.c b/keyboards/clueboard/keymaps/colemak/keymap.c new file mode 100644 index 0000000000..42c85ff9d8 --- /dev/null +++ b/keyboards/clueboard/keymaps/colemak/keymap.c @@ -0,0 +1,86 @@ +#include "clueboard.h" + +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, MO(_FL), KC_LGUI,KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_CAPS, BL_STEP, \ + _______, _______, _______,_______,_______,_______,_______,KC_HOME,KC_PGDN,KC_PGUP, KC_END, _______, _______, _______, _______, \ + KC_DEL, _______, MO(_CL),_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP, KC_RGHT, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______,_______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _CL: Control layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), +}; + +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), // Calls action_function() +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t mods_pressed; + static bool mod_flag; + + switch (id) { + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + + if (record->event.pressed) { + /* The key is being pressed. + */ + if (mods_pressed) { + mod_flag = true; + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + /* The key is being released. + */ + if (mod_flag) { + mod_flag = false; + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/default/keymap.c b/keyboards/clueboard/keymaps/default/keymap.c index 01f158bf0f..7fad9c1b21 100644 --- a/keyboards/clueboard/keymaps/default/keymap.c +++ b/keyboards/clueboard/keymaps/default/keymap.c @@ -1,7 +1,8 @@ #include "clueboard.h" -// Used for SHIFT_ESC -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. @@ -9,21 +10,10 @@ // entirely and just use numbers. #define _BL 0 #define _FL 1 -#define _RS 2 +#define _CL 2 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * ,--------------------------------------------------------------------------. ,----. - * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP| - * |--------------------------------------------------------------------------| |----| - * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN| - * |--------------------------------------------------------------------------| `----' - * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| - * |-----------------------------------------------------------------------------. - * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP| - * |------------------------------------------------------------------------|----|----. - * | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT| - * `----------------------------------------------------------------------------------' + /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = KEYMAP( F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ @@ -33,61 +23,46 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), /* Keymap _FL: Function Layer - * ,--------------------------------------------------------------------------. ,----. - * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| - * |--------------------------------------------------------------------------| |----| - * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | |PGUP| - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL|HOME|PGDN| END| - * `----------------------------------------------------------------------------------' */ [_FL] = KEYMAP( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END), + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ + _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), - /* Keymap _RS: Reset layer - * ,--------------------------------------------------------------------------. ,----. - * | | | | | | | | | | | | | | | | | | - * |--------------------------------------------------------------------------| |----| - * | | | | |RESET| | | | | | | | | | | | - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL| | | | - * `----------------------------------------------------------------------------------' + /* Keymap _CL: Control layer */ -[_RS] = KEYMAP( - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \ - KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI), -}; - -enum function_id { - SHIFT_ESC, +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), }; +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(SHIFT_ESC), + [0] = ACTION_FUNCTION(0), // Calls action_function() }; void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t shift_esc_shift_mask; + static uint8_t mods_pressed; + static bool mod_flag; + switch (id) { - case SHIFT_ESC: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + if (record->event.pressed) { - if (shift_esc_shift_mask) { + /* The key is being pressed. + */ + if (mods_pressed) { + mod_flag = true; add_key(KC_GRV); send_keyboard_report(); } else { @@ -95,7 +70,10 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { send_keyboard_report(); } } else { - if (shift_esc_shift_mask) { + /* The key is being released. + */ + if (mod_flag) { + mod_flag = false; del_key(KC_GRV); send_keyboard_report(); } else { diff --git a/keyboards/clueboard/keymaps/default/layout.png b/keyboards/clueboard/keymaps/default/layout.png Binary files differnew file mode 100644 index 0000000000..cd318163e4 --- /dev/null +++ b/keyboards/clueboard/keymaps/default/layout.png diff --git a/keyboards/clueboard/keymaps/default/readme.md b/keyboards/clueboard/keymaps/default/readme.md new file mode 100644 index 0000000000..cede17ee17 --- /dev/null +++ b/keyboards/clueboard/keymaps/default/readme.md @@ -0,0 +1,17 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + + + +# Default Clueboard Layout + +This is the default layout that comes flashed on every Clueboard. For the most +part it's a straightforward and easy to follow layout. The only unusual key is +the key in the upper left, which sends Escape normally, but Grave when any of +the Ctrl, Alt, or GUI modifiers are held down. diff --git a/keyboards/clueboard/keymaps/mac_optimized/keymap.c b/keyboards/clueboard/keymaps/mac_optimized/keymap.c new file mode 100644 index 0000000000..7ea02d27e8 --- /dev/null +++ b/keyboards/clueboard/keymaps/mac_optimized/keymap.c @@ -0,0 +1,86 @@ +#include "clueboard.h" + +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _CL: Control layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), +}; + +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), // Calls action_function() +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t mods_pressed; + static bool mod_flag; + + switch (id) { + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + + if (record->event.pressed) { + /* The key is being pressed. + */ + if (mods_pressed) { + mod_flag = true; + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + /* The key is being released. + */ + if (mod_flag) { + mod_flag = false; + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/mac_optimized/layout.png b/keyboards/clueboard/keymaps/mac_optimized/layout.png Binary files differnew file mode 100644 index 0000000000..e84ba54ea9 --- /dev/null +++ b/keyboards/clueboard/keymaps/mac_optimized/layout.png diff --git a/keyboards/clueboard/keymaps/mac_optimized/readme.md b/keyboards/clueboard/keymaps/mac_optimized/readme.md new file mode 100644 index 0000000000..940e09125d --- /dev/null +++ b/keyboards/clueboard/keymaps/mac_optimized/readme.md @@ -0,0 +1,15 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + + + +# Default Clueboard Layout for Mac + +This is the default Clueboard layout with Alt and GUI switched to match Mac +conventions. diff --git a/keyboards/clueboard/keymaps/max/Makefile b/keyboards/clueboard/keymaps/max/Makefile deleted file mode 100644 index 950dadf841..0000000000 --- a/keyboards/clueboard/keymaps/max/Makefile +++ /dev/null @@ -1,49 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Build Options -# change to "no" to disable the options, or define them in the makefile.mk in -# the appropriate keymap folder that will get included automatically -# -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/clueboard/keymaps/max/keymap.c b/keyboards/clueboard/keymaps/max/keymap.c deleted file mode 100644 index 193809840b..0000000000 --- a/keyboards/clueboard/keymaps/max/keymap.c +++ /dev/null @@ -1,85 +0,0 @@ -#include "clueboard.h" - -// Used for SHIFT_ESC -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _RS 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * ,--------------------------------------------------------------------------. ,----. - * | Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| ~| BS| |PgUp| - * |--------------------------------------------------------------------------| |----| - * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PgDn| - * |--------------------------------------------------------------------------| `----' - * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| - * |-----------------------------------------------------------------------------. - * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| Up| - * |------------------------------------------------------------------------|----|----. - * | Ctrl| Alt| Gui| MHen| Space| Space| Hen| Gui| Alt| Ctrl|Left|Down|Rght| - * `----------------------------------------------------------------------------------' - */ -[_BL] = KEYMAP( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ - MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \ - KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - * ,--------------------------------------------------------------------------. ,----. - * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| - * |--------------------------------------------------------------------------| |----| - * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | |PGUP| - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL|HOME|PGDN| END| - * `----------------------------------------------------------------------------------' - */ -[_FL] = KEYMAP( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_PGUP, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END), - - /* Keymap _RS: Reset/Underlight layer - * ,--------------------------------------------------------------------------. ,----. - * | | | | | | | | | | | | | | | | | | - * |--------------------------------------------------------------------------| |----| - * | | | | |RESET| | | | | | | | | | | | - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL| | | | - * `----------------------------------------------------------------------------------' - */ -[_RS] = KEYMAP( - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \ - KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI), -}; - -/*enum function_id { -};*/ - -const uint16_t PROGMEM fn_actions[] = { -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch (id) { - } -} diff --git a/keyboards/clueboard/keymaps/maximised/keymap.c b/keyboards/clueboard/keymaps/maximised/keymap.c new file mode 100644 index 0000000000..ebaefa6690 --- /dev/null +++ b/keyboards/clueboard/keymaps/maximised/keymap.c @@ -0,0 +1,47 @@ +#include "clueboard.h" + +// Helpful defines +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), KC_PGUP, \ + _______, _______, _______,_______, _______,_______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), + + /* Keymap _CL: Reset/Underlight layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { +}; diff --git a/keyboards/clueboard/keymaps/maximised/layout.png b/keyboards/clueboard/keymaps/maximised/layout.png Binary files differnew file mode 100644 index 0000000000..bdc5d76239 --- /dev/null +++ b/keyboards/clueboard/keymaps/maximised/layout.png diff --git a/keyboards/clueboard/keymaps/maximised/readme.md b/keyboards/clueboard/keymaps/maximised/readme.md new file mode 100644 index 0000000000..b95d1750f4 --- /dev/null +++ b/keyboards/clueboard/keymaps/maximised/readme.md @@ -0,0 +1,14 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + + + +# Maximised Clueboard Layout + +This layout is intended for a board with one or both shifts split. The outside key on the split shift is an Fn, while the inside is shift. The bottom row has all the mods on both sides, optimised for a Mac. diff --git a/keyboards/clueboard/keymaps/mouse_keys/Makefile b/keyboards/clueboard/keymaps/mouse_keys/Makefile new file mode 100644 index 0000000000..6c605daecf --- /dev/null +++ b/keyboards/clueboard/keymaps/mouse_keys/Makefile @@ -0,0 +1 @@ +MOUSEKEY_ENABLE = yes diff --git a/keyboards/clueboard/keymaps/mouse_keys/keymap.c b/keyboards/clueboard/keymaps/mouse_keys/keymap.c new file mode 100644 index 0000000000..d3108d1e2b --- /dev/null +++ b/keyboards/clueboard/keymaps/mouse_keys/keymap.c @@ -0,0 +1,96 @@ +#include "clueboard.h" + +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 +#define _ML 3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ + _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _CL: Control layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), + + /* Keymap _ML: Mouse layer + */ + [_ML] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, \ + _______, _______, KC_BTN3,KC_BTN2,KC_BTN1,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_MS_U, \ + _______, _______, _______,_______, LT(_ML, KC_SPC),LT(_ML, KC_SPC), _______, KC_BTN1, KC_BTN2, KC_BTN3, KC_MS_L, KC_MS_D,KC_MS_R), +}; + +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), // Calls action_function() +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t mods_pressed; + static bool mod_flag; + + switch (id) { + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + + if (record->event.pressed) { + /* The key is being pressed. + */ + if (mods_pressed) { + mod_flag = true; + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + /* The key is being released. + */ + if (mod_flag) { + mod_flag = false; + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/mouse_keys/layout.png b/keyboards/clueboard/keymaps/mouse_keys/layout.png Binary files differnew file mode 100644 index 0000000000..52e5c4581b --- /dev/null +++ b/keyboards/clueboard/keymaps/mouse_keys/layout.png diff --git a/keyboards/clueboard/keymaps/mouse_keys/readme.md b/keyboards/clueboard/keymaps/mouse_keys/readme.md new file mode 100644 index 0000000000..97ac6dfa23 --- /dev/null +++ b/keyboards/clueboard/keymaps/mouse_keys/readme.md @@ -0,0 +1,16 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + + + +# MouseKeys Layout + +This layout adds a mouse layer. When you hold down the spacebar the arrow keys +will move your mouse cursor. You can click using the 3 mods to the left of the +arrow keys, or the 3 keys under your primary fingers on the home row. diff --git a/keyboards/clueboard/keymaps/shift_fn/keymap.c b/keyboards/clueboard/keymaps/shift_fn/keymap.c new file mode 100644 index 0000000000..c4fae03698 --- /dev/null +++ b/keyboards/clueboard/keymaps/shift_fn/keymap.c @@ -0,0 +1,86 @@ +#include "clueboard.h" + +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer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eymap _CL: Control layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD,RGB_SAD,RGB_HUI), +}; + +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), // Calls action_function() +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t mods_pressed; + static bool mod_flag; + + switch (id) { + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + + if (record->event.pressed) { + /* The key is being pressed. + */ + if (mods_pressed) { + mod_flag = true; + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + /* The key is being released. + */ + if (mod_flag) { + mod_flag = false; + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/shift_fn/layout.png b/keyboards/clueboard/keymaps/shift_fn/layout.png Binary files differnew file mode 100644 index 0000000000..66d85410cc --- /dev/null +++ b/keyboards/clueboard/keymaps/shift_fn/layout.png diff --git a/keyboards/clueboard/keymaps/shift_fn/readme.md b/keyboards/clueboard/keymaps/shift_fn/readme.md new file mode 100644 index 0000000000..369f556f88 --- /dev/null +++ b/keyboards/clueboard/keymaps/shift_fn/readme.md @@ -0,0 +1,17 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + + + +# Shift Fn Clueboard Layout + +This is an experimental layout. It makes the left shift key a dual roll key. +For most keys it acts as a shift key, but for some keys it activates an +alternate function instead. Primarily I use this to access the F-keys under +the number rows. diff --git a/keyboards/clueboard/keymaps/skully/keymap.c b/keyboards/clueboard/keymaps/skully/keymap.c index df6f054e07..077d214fac 100644 --- a/keyboards/clueboard/keymaps/skully/keymap.c +++ b/keyboards/clueboard/keymaps/skully/keymap.c @@ -1,7 +1,8 @@ #include "clueboard.h" -// Used for SHIFT_ESC -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. @@ -9,21 +10,10 @@ // entirely and just use numbers. #define _BL 0 #define _FL 1 -#define _RS 2 +#define _CL 2 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * ,--------------------------------------------------------------------------. ,----. - * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP| - * |--------------------------------------------------------------------------| |----| - * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN| - * |--------------------------------------------------------------------------| `----' - * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| - * |-----------------------------------------------------------------------------. - * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP| - * |------------------------------------------------------------------------|----|----. - * | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT| - * `----------------------------------------------------------------------------------' + /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = KEYMAP( F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ @@ -33,61 +23,43 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL,KC_LALT,KC_LGUI,MO(_FL), KC_SPC, KC_SPC, MO(_FL), KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), /* Keymap _FL: Function Layer - * ,--------------------------------------------------------------------------. ,----. - * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| - * |--------------------------------------------------------------------------| |----| - * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | |PGUP| - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL|HOME|PGDN| END| - * `----------------------------------------------------------------------------------' */ [_FL] = KEYMAP( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_DEL, BL_STEP, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ - KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_PGUP, \ - KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL), KC_TRNS,KC_TRNS, MO(_FL),KC_TRNS,KC_TRNS,MO(_FL),KC_HOME,KC_PGDN,KC_END), + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_DEL, BL_STEP, \ + _______,_______,_______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,_______,_______,_______, _______, \ + _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_PGUP, \ + _______,_______,_______,MO(_FL), _______,_______, MO(_FL),_______,_______,MO(_FL),KC_HOME,KC_PGDN,KC_END), - /* Keymap _RS: Reset layer - * ,--------------------------------------------------------------------------. ,----. - * | | | | | | | | | | | | | | | | | | - * |--------------------------------------------------------------------------| |----| - * | | | | |RESET| | | | | | | | | | | | - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL| | | | - * `----------------------------------------------------------------------------------' + /* Keymap _CL: Control layer */ -[_RS] = KEYMAP( - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ - KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL),KC_TRNS, KC_TRNS, KC_TRNS), -}; - -enum function_id { - SHIFT_ESC, +[_CL] = KEYMAP( + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,_______,_______,_______, _______,_______, _______,_______,_______,MO(_FL),_______, _______, _______), }; const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(SHIFT_ESC), + [0] = ACTION_FUNCTION(0), }; void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t shift_esc_shift_mask; + static uint8_t mods_pressed; + static bool mod_flag; + switch (id) { - case SHIFT_ESC: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + if (record->event.pressed) { - if (shift_esc_shift_mask) { + /* The key is being pressed. + */ + if (mods_pressed) { + mod_flag = true; add_key(KC_GRV); send_keyboard_report(); } else { @@ -95,7 +67,10 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { send_keyboard_report(); } } else { - if (shift_esc_shift_mask) { + /* The key is being released. + */ + if (mod_flag) { + mod_flag = false; del_key(KC_GRV); send_keyboard_report(); } else { diff --git a/keyboards/clueboard/keymaps/skully/layout.png b/keyboards/clueboard/keymaps/skully/layout.png Binary files differnew file mode 100644 index 0000000000..64854aaefd --- /dev/null +++ b/keyboards/clueboard/keymaps/skully/layout.png diff --git a/keyboards/clueboard/keymaps/skully/readme.md b/keyboards/clueboard/keymaps/skully/readme.md index c1182123d9..08255dfbc5 100644 --- a/keyboards/clueboard/keymaps/skully/readme.md +++ b/keyboards/clueboard/keymaps/skully/readme.md @@ -1,3 +1,14 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + + + # skullY's Clueboard Layout This layout is what I (@skullydazed) use on my personal Clueboards. I mostly use it for programming, CAD, and general typing. diff --git a/keyboards/clueboard/keymaps/unix_optimized/keymap.c b/keyboards/clueboard/keymaps/unix_optimized/keymap.c new file mode 100644 index 0000000000..7c1359954b --- /dev/null +++ b/keyboards/clueboard/keymaps/unix_optimized/keymap.c @@ -0,0 +1,86 @@ +#include "clueboard.h" + +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, KC_INS, \ + _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, KC_DEL, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _CL: Control layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD,RGB_HUI), +}; + +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), // Calls action_function() +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t mods_pressed; + static bool mod_flag; + + switch (id) { + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + + if (record->event.pressed) { + /* The key is being pressed. + */ + if (mods_pressed) { + mod_flag = true; + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + /* The key is being released. + */ + if (mod_flag) { + mod_flag = false; + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/unix_optimized/layout.png b/keyboards/clueboard/keymaps/unix_optimized/layout.png Binary files differnew file mode 100644 index 0000000000..ea7d30e357 --- /dev/null +++ b/keyboards/clueboard/keymaps/unix_optimized/layout.png diff --git a/keyboards/clueboard/keymaps/unix_optimized/readme.md b/keyboards/clueboard/keymaps/unix_optimized/readme.md new file mode 100644 index 0000000000..3510e138bf --- /dev/null +++ b/keyboards/clueboard/keymaps/unix_optimized/readme.md @@ -0,0 +1,15 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + + + +# Default Clueboard Layout + +This is the default layout except that Caps Lock has been changed to Control +and Insert and Delete have been put into the Fn layer. diff --git a/keyboards/clueboard/keymaps/win_optimized/keymap.c b/keyboards/clueboard/keymaps/win_optimized/keymap.c new file mode 100644 index 0000000000..c5553ff1fb --- /dev/null +++ b/keyboards/clueboard/keymaps/win_optimized/keymap.c @@ -0,0 +1,86 @@ +#include "clueboard.h" + +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ + _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _CL: Control layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), +}; + +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), // Calls action_function() +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t mods_pressed; + static bool mod_flag; + + switch (id) { + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + + if (record->event.pressed) { + /* The key is being pressed. + */ + if (mods_pressed) { + mod_flag = true; + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + /* The key is being released. + */ + if (mod_flag) { + mod_flag = false; + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/win_optimized/layout.png b/keyboards/clueboard/keymaps/win_optimized/layout.png Binary files differnew file mode 100644 index 0000000000..7d8c82da7c --- /dev/null +++ b/keyboards/clueboard/keymaps/win_optimized/layout.png diff --git a/keyboards/clueboard/keymaps/win_optimized/readme.md b/keyboards/clueboard/keymaps/win_optimized/readme.md new file mode 100644 index 0000000000..cede17ee17 --- /dev/null +++ b/keyboards/clueboard/keymaps/win_optimized/readme.md @@ -0,0 +1,17 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + + + +# Default Clueboard Layout + +This is the default layout that comes flashed on every Clueboard. For the most +part it's a straightforward and easy to follow layout. The only unusual key is +the key in the upper left, which sends Escape normally, but Grave when any of +the Ctrl, Alt, or GUI modifiers are held down. diff --git a/keyboards/clueboard/rules.mk b/keyboards/clueboard/rules.mk index 3909fbd5cb..7ce096ba8b 100644 --- a/keyboards/clueboard/rules.mk +++ b/keyboards/clueboard/rules.mk @@ -90,14 +90,14 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +EXTRAKEY_ENABLE ?= no # Audio control and System control(+450) CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration +COMMAND_ENABLE ?= yes # Commands for debug and configuration NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work AUDIO_ENABLE ?= no -RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-base-layout.png b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-base-layout.png Binary files differindex 2c03af5818..273a49778e 100644 --- a/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-base-layout.png +++ b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-base-layout.png diff --git a/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-2-media-and-mouse.png b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-2-media-and-mouse.png Binary files differindex a267ff23d2..5930e38aca 100644 --- a/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-2-media-and-mouse.png +++ b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-2-media-and-mouse.png diff --git a/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-3-navigation.png b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-3-navigation.png Binary files differdeleted file mode 100644 index c8c90cf5c4..0000000000 --- a/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-3-navigation.png +++ /dev/null diff --git a/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-3-unicode.png b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-3-unicode.png Binary files differnew file mode 100644 index 0000000000..0c6473abbd --- /dev/null +++ b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-3-unicode.png diff --git a/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-4-unicode-2.png b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-4-unicode-2.png Binary files differnew file mode 100644 index 0000000000..4488e1b37b --- /dev/null +++ b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-4-unicode-2.png diff --git a/keyboards/ergodox/keymaps/deadcyclo/keymap.c b/keyboards/ergodox/keymaps/deadcyclo/keymap.c index 5774511cc7..243ce94e98 100644 --- a/keyboards/ergodox/keymaps/deadcyclo/keymap.c +++ b/keyboards/ergodox/keymaps/deadcyclo/keymap.c @@ -5,8 +5,9 @@ #define BASE 0 // default layer #define SYMB 1 // symbols -#define MDIA 2 // media keys -#define NAVG 3 // navigation +#define MDIA 2 // media keys and navigation +#define UNI 3 // unicode 1 +#define UNI2 4 // unicode 2 enum macros { RUN @@ -94,11 +95,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,--------------------------------------------------. ,--------------------------------------------------. * | Esc/L3 | 1 | 2 | 3 | 4 | 5 | 6 | | 6 | 7 | 8 | 9 | 0 | - | =/L3 | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Tab/L1 | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \/L1 | + * | Tab/L1 | Q | W | E | R | T | L1 | | L2 | Y | U | I | O | P | \/L1 | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | LCtrl | A | S | D | F | G |------| |------| H | J | K | L |; / L2| ctrl/'| + * | LCtrl | A | S | D | F | G |------| |------| H | J | K | L | ; | ctrl/'| * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| - * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * | LShift |Z / L4|X / L2| C | V | B | | | | N | M | , |. / L2|/ / L4| RShift | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' * |Grv/L1| UNI |AltShf| Lalt | Ralt | | Lalt | Ralt | LEAD | UNI | ~/L1 | * `----------------------------------' `----------------------------------' @@ -114,25 +115,25 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // Otherwise, it needs KC_* [BASE] = KEYMAP( // layer 0 : default // left hand - LT(NAVG,KC_ESC), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, + LT(UNI,KC_ESC), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, LT(SYMB,KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), - KC_LCTL, LT(MDIA, KC_A), KC_S, KC_D, KC_F, KC_G, - KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, LT(4, KC_Z), LT(MDIA, KC_X), KC_C, KC_V, KC_B, ALL_T(KC_NO), LT(SYMB,KC_GRV),LCTL(LSFT(KC_U)), LALT(KC_LSFT), KC_RALT,KC_LALT, ALT_T(KC_APP), KC_HOME, KC_END, KC_SPC,KC_TAB,KC_LBRC, // right hand - KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, LT(NAVG,KC_EQL), - TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, LT(SYMB, KC_BSLS), - KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),CTL_T(KC_QUOT), - MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, LT(UNI,KC_EQL), + TG(MDIA), KC_Y, KC_U, KC_I, KC_O, KC_P, LT(SYMB, KC_BSLS), + KC_H, KC_J, KC_K, KC_L, KC_SCLN,CTL_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,LT(MDIA, KC_DOT), LT(UNI2, KC_SLSH), KC_RSFT, KC_LALT, KC_RALT,KC_LEAD,LCTL(LSFT(KC_U)), LT(SYMB,KC_TILD), KC_PGUP, KC_INS, KC_PGDN, - KC_RBRC,KC_BSPC, KC_ENT + KC_RBRC,KC_BSPC, KC_ENT ), -/* Keymap 1: Symbol Layer LCTL(LSFT(KC_U)) +/* Keymap 1: Symbol Layer LCTL(LSFT(KC_U)) * * ,--------------------------------------------------. ,--------------------------------------------------. * | | F1 | F2 | F3 | F4 | F5 | F6 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 | @@ -177,13 +178,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 2: Media, mouse and navigation * * ,--------------------------------------------------. ,--------------------------------------------------. - * | | gg(1)| | | | | | | | | | | | | | + * | | gg(1)| gg(2)| gg(3)| gg(4)| gg(5)| gg(6)| | gg(6)| gg(7)| gg(8)| gg(9)| gg(0)| | | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | | | | MsUp | RUN | | | | | | | Up | | | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | |MsLeft|MsDown|MsRght| |------| |------| | Left | Down | Right| | Play | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | Prev | Next | | | + * | | | | | | | | | | | Prev | Next | | | | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | * `----------------------------------' `----------------------------------' @@ -209,7 +210,7 @@ KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, M(RUN), KC_TRNS, KC_TRNS, F(I3_GO_GROUP_6), F(I3_GO_GROUP_7), F(I3_GO_GROUP_8), F(I3_GO_GROUP_9), F(I3_GO_GROUP_10), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_MPLY, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -238,7 +239,7 @@ KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, M(RUN), KC_TRNS, KC_TRNS, * `--------------------' `--------------------' */ // Unicode -[NAVG] = KEYMAP( +[UNI] = KEYMAP( KC_TRNS, UC(0x250c), UC(0x2510), UC(0x2514), UC(0x2518), UC(0x2502), UC(0x2500), KC_TRNS, F(EMOJI_SHRUG), F(EMOJI_YAY), F(EMOJI_HUG), F(EMOJI_SMILE), F(EMOJI_SMILE2), KC_TRNS, KC_TRNS, F(EMOJI_HMM1), F(EMOJI_HMM2), F(EMOJI_BEAR1), F(EMOJI_BEAR2), F(EMOJI_FUU), @@ -257,6 +258,48 @@ KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, M(RUN), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), + +/* Keymap 4: Unicode 2 + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | ¹ | ² | ³ | ⁴ | ⁵ | ⁶ | | ⁶ | ⁷ | ⁸ | ⁹ | ⁰ | ℃ | ™ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ₁ | ₂ | ₃ | ₄ | ₅ | ₆ | | ₆ | ₇ | ₈ | ₉ | ₀ | ⁄ | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | ⅞ | ⅝ | ⅜ | ⅛ | ⅚ |------| |------| ⅓ | ⅒ | ⅑ | ⅐ | ¾ | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | ⅗ | ⅖ | ⅕ | ⅔ | | ¼ | ⅙ | ⅘ | ½ | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// Unicode 2 +[UNI2] = KEYMAP( + KC_TRNS, UC(0x00b9), UC(0x00b2), UC(0x00b3), UC(0x2074), UC(0x2075), UC(0x2076), + KC_TRNS, UC(0x2081), UC(0x2082), UC(0x2083), UC(0x2084), UC(0x2085), UC(0x2086), + KC_TRNS, UC(0x215e), UC(0x215d), UC(0x215c), UC(0x215b), UC(0x215a), + KC_TRNS, KC_TRNS, KC_TRNS, UC(0x2157), UC(0x2156), UC(0x2155), UC(0x2154), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + UC(0x2076), UC(0x2077), UC(0x2078), UC(0x2079), UC(0x2070), UC(0x2103), UC(0x2122), + UC(0x2086), UC(0x2087), UC(0x2088), UC(0x2089), UC(0x2080), UC(0x2044), KC_TRNS, + UC(0x2153), UC(0x2152), UC(0x2151), UC(0x2150), UC(0x00be), KC_TRNS, + UC(0x00bc), UC(0x2159), UC(0x2158), UC(0x00bd), KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), }; const uint16_t PROGMEM fn_actions[] = { @@ -506,8 +549,11 @@ void matrix_scan_user(void) { #endif break; case 4: - ergodox_right_led_1_on(); // TODO: Make a fourth layer + ergodox_right_led_1_on(); ergodox_right_led_3_on(); + #ifdef RGBLIGHT_ENABLE + rgblight_setrgb(0xff,0x00,0xff); + #endif break; default: // none diff --git a/keyboards/ergodox/keymaps/deadcyclo/readme.md b/keyboards/ergodox/keymaps/deadcyclo/readme.md index fa41f0ec16..c839f99c90 100644 --- a/keyboards/ergodox/keymaps/deadcyclo/readme.md +++ b/keyboards/ergodox/keymaps/deadcyclo/readme.md @@ -51,10 +51,16 @@ provides standard media control keys, and default arrow keys. ## Layer 3 - Unicode -[](http://www.keyboard-layout-editor.com/#/gists/67d9613dcd873c68693d11863d0fd289) +[](http://www.keyboard-layout-editor.com/#/gists/67d9613dcd873c68693d11863d0fd289) The unicode layer provides keys for directly typing unicode (utf-8) +## Layer 4 - Unicode 2 + +[](http://www.keyboard-layout-editor.com/#/gists/7b2241110ab8311d9668a0798f3baf4a) + +The unicode 2 layer provides keys for directly typing unicode (utf-8) + # Changelog - 02.01.2017 Added delete key on second layer @@ -63,6 +69,7 @@ The unicode layer provides keys for directly typing unicode (utf-8) - 24.01.2017 Added unicode keys. Added shrug hug and yay. Moved Navigation to layer 2 - 25.01.2017 Added lots of new emojis and some unicode keys - 27.01.2017 Added new unicode keys and shortcut for ibus unicode composer key (CTRL+SHIFT+U) +- 11.03.2017 Added additional unicode layer. Moved some layer switch keys to more sane locations # TODO diff --git a/keyboards/ergodox/keymaps/german-lukas/README.md b/keyboards/ergodox/keymaps/german-lukas/README.md new file mode 100644 index 0000000000..3566b4ee64 --- /dev/null +++ b/keyboards/ergodox/keymaps/german-lukas/README.md @@ -0,0 +1,12 @@ +# About this keymap + +This keymap is based on the qwertz layout. +It has a key for pressing the left control and the left alt key at once. + +Linux makes a difference between AltGr and Control + Alt. Some keybindings are easier to press now. + +Also, I added a layer for pressing Control + Alt + F-Keys very fast. + +# Layer + +Each layer in the *keymap.c*-file has a comment showing the mappings of the layer. diff --git a/keyboards/ergodox/keymaps/german-lukas/keymap.c b/keyboards/ergodox/keymaps/german-lukas/keymap.c new file mode 100644 index 0000000000..c6e9f2f900 --- /dev/null +++ b/keyboards/ergodox/keymaps/german-lukas/keymap.c @@ -0,0 +1,236 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_german.h" + +// Layer names +#define BASE 0 // default layer +#define SYMB 1 // symbol layer +#define MDIA 2 // media keys +#define SHRT 3 // shortcut layer + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Caps | 1 | 2 | 3 | 4 | 5 |X ` X| | PRSC | 6 | 7 | 8 | 9 | 0 | ß | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | L1 | | L1 | Z | U | I | O | P | Ü | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Esc | A | S | D | F | G |------| |------| H | J | K | L | Ö | Ä/L2 | + * |--------+------+------+------+------+------| L2 | | L2 |------+------+------+------+------+--------| + * | LShift | Y | X | C | V | B | | | | N | M | , | . | - | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGui | ^ | < | LEFT | RIGHT| | Up | Down | # | + | LCA | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | CTRL | ALT | | Alt |Ctrl/Esc| + * ,------+------+------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Del |------| |------| Bkspc | Enter| + * | | | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_CAPS, KC_1, KC_2, KC_3, KC_4, KC_5, DE_ACUT, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, DE_Y, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + KC_LGUI, DE_CIRC, DE_LESS, KC_LEFT, KC_RIGHT, + KC_LCTRL, KC_LALT, + KC_HOME, + KC_SPC ,KC_DELT,KC_END, + // right hand + KC_PSCREEN, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(MDIA), DE_Z, KC_U, KC_I, KC_O, KC_P, LT(SHRT,DE_UE), + KC_H, KC_J, KC_K, KC_L, DE_OE, LT(MDIA,DE_AE), + MEH_T(KC_NO), KC_N, KC_M, KC_COMM, KC_DOT, DE_MINS, KC_RSFT, + KC_UP, KC_DOWN, DE_HASH, DE_PLUS, LCA_T(KC_NO), + KC_RALT, KC_RCTRL, + KC_PGUP, + KC_PGDN, KC_BSPC, KC_ENT + ), + +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,DE_EXLM,DE_AT, DE_LCBR,DE_RCBR,DE_PIPE,KC_TRNS, + KC_TRNS,DE_HASH,DE_DLR, DE_LPRN,DE_RPRN,DE_GRV, + KC_TRNS,DE_PERC,DE_CIRC,DE_LBRC,DE_RBRC,DE_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, DE_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, DE_PLUS, KC_TRNS, + KC_TRNS, DE_AMPR, KC_1, KC_2, KC_3, DE_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, DE_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | Lclk | MsUp | Rclk | | | | | |VolDwn| Mute |VolUp | | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | Btn4 |MsLeft|MsDown|MsRght| Btn5 |------| |------| | Prev | Stop | Play | Next | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | |WhRght|WhDown| WhUp |WhLeft|WhClk | | | |BwSrch|BwBack|BwHome|BwRefr|BwFwd | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | |MsAcl0|MsAcl1|MsAcl2| | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | |Brwser|Brwser| + * | Lclk | Rclk |------| |------|Back |Forwd | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + // left hand + KC_TRNS, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_TRNS, + KC_TRNS, KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS, + KC_TRNS, KC_BTN4, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN5, + KC_TRNS, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R, KC_BTN3, KC_TRNS, + KC_TRNS, KC_TRNS, KC_ACL0, KC_ACL1, KC_ACL2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_BTN1, KC_BTN2, KC_TRNS, + // right hand + KC_TRNS, KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11, + KC_TRNS, KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_F12, + KC_TRNS, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_TRNS, + KC_TRNS, KC_WSCH, KC_WBAK, KC_WHOM, KC_WREF, KC_WFWD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_WBAK, KC_WFWD +), + +/* Keymap 3: Linux shortcuts + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | |LCA-F1|LCA-F2|LCA-F3|LCA-F4|LCA-F5| | | |LCA-F6|LCA-F7|LCA-F8|LCA-F9| | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |LCA-Le| |LCA-Ri| |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | |LCA-Le|LCA-Ri| | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// Shortcuts +[SHRT] = KEYMAP( + // left hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, LCA(KC_F1), LCA(KC_F2), LCA(KC_F3), LCA(KC_F4), LCA(KC_F5), KC_TRNS, + KC_TRNS, KC_TRNS, LCA(KC_LEFT), KC_TRNS, LCA(KC_RIGHT), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, LCA(KC_LEFT), LCA(KC_RIGHT), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, LCA(KC_F6), LCA(KC_F7), LCA(KC_F8), LCA(KC_F9), KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + LCA(KC_UP), LCA(KC_DOWN), KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case SYMB: + ergodox_right_led_1_on(); + break; + case MDIA: + ergodox_right_led_2_on(); + break; + case SHRT: + ergodox_right_led_3_on(); + break; + default: + ergodox_board_led_off(); + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/guni/keymap.c b/keyboards/ergodox/keymaps/guni/keymap.c new file mode 100644 index 0000000000..9d9191f627 --- /dev/null +++ b/keyboards/ergodox/keymaps/guni/keymap.c @@ -0,0 +1,177 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "bootloader.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + KEYMAP( // layer 0 : default + // left hand + KC_EQL , KC_1, KC_2, KC_3, KC_4, KC_5, KC_LBRC, + KC_FN25 , KC_Q, KC_W, KC_E, KC_R, KC_T, KC_HOME, + KC_FN27 , KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_PGUP, + KC_LGUI , KC_GRV,KC_LEFT,KC_RGHT,KC_LALT, + KC_NO , KC_NO , + KC_NO , + KC_BSPC,KC_DEL ,KC_FN23, + // right hand + KC_RBRC , KC_6, KC_7 , KC_8, KC_9, KC_0, KC_MINS, + KC_END , KC_Y, KC_U , KC_I, KC_O, KC_P, KC_FN28, + KC_H , KC_J, KC_K , KC_L, KC_SCLN,KC_FN30, + KC_PGDN , KC_N, KC_M , KC_COMM,KC_DOT, KC_SLSH,KC_FN29, + KC_RALT , KC_DOWN,KC_UP, KC_NO ,KC_RGUI, + KC_NO , KC_NO, + KC_NO , + KC_FN29,KC_ENT ,KC_SPC + ), + + KEYMAP( // layer 1 : function and symbol keys + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, + KC_TRNS,KC_AT,KC_UNDS ,KC_LBRC,KC_RBRC,KC_CIRC ,KC_TRNS, + KC_TRNS,KC_BSLS,KC_SLSH,KC_LCBR ,KC_RCBR ,KC_ASTR, + KC_TRNS,KC_HASH ,KC_DLR ,KC_PIPE ,KC_TILD ,KC_GRV ,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_FN1, + // right hand + KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS,KC_EXLM,LSFT(KC_COMM),LSFT(KC_DOT),KC_EQL,KC_AMPR, KC_TRNS, + LSFT(KC_SLSH),KC_LPRN,KC_RPRN,KC_MINS,LSFT(KC_SCLN),KC_TRNS, + KC_TRNS,KC_PLUS,LSFT(KC_5),LSFT(KC_QUOT),KC_QUOT,KC_SCLN,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + + KEYMAP( // layer 2: navigation + // left hand + KC_NO,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_PGUP,KC_HOME,KC_UP ,KC_END,KC_NO ,KC_TRNS, + KC_TRNS,KC_PGDN,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO,KC_NO,KC_NO, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_FN1 , + // right hand + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS ,KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_END ,KC_TRNS, + KC_NO, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT,KC_TRNS, + KC_TRNS,KC_TRNS, KC_HOME, KC_UP, KC_END, KC_PGUP,KC_TRNS, + KC_LEFT, KC_DOWN,KC_RGHT,KC_PGDN,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + KEYMAP( // layer 3 : teensy bootloader functions + // left hand + KC_FN0, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_FN1 , + // right hand + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + + + KEYMAP( // layer 4: numpad + // left hand + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS,KC_NLCK,KC_PSLS,KC_PAST,KC_PAST,KC_PMNS,KC_BSPC, + KC_TRNS,KC_NO, KC_P7, KC_P8, KC_P9, KC_PMNS,KC_BSPC, + KC_NO, KC_P4, KC_P5, KC_P6, KC_PPLS,KC_PENT, + KC_TRNS,KC_NO, KC_P1, KC_P2, KC_P3, KC_PPLS,KC_PENT, + KC_P0, KC_PDOT,KC_SLSH,KC_PENT,KC_PENT, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + +}; + +/* id for user defined functions */ +enum function_id { + TEENSY_KEY, +}; + +/* + * Fn action definition + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(TEENSY_KEY), // FN0 - Teensy key + [1] = ACTION_LAYER_SET(0, ON_PRESS), + //[11] = ACTION_MODS_KEY(MOD_LSFT, KC_COMM), + //[12] = ACTION_MODS_KEY(MOD_LSFT, KC_DOT), + + //[14] = ACTION_MODS_KEY(MOD_LSFT, KC_SLSH), + //[17] = ACTION_MODS_KEY(MOD_LSFT, KC_SCLN), + //[20] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + //[21] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT), + [23] = ACTION_LAYER_SET(3, ON_PRESS), + [24] = ACTION_LAYER_SET(2, ON_PRESS), + [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_TAB), + [26] = ACTION_LAYER_SET(1, ON_PRESS), + [27] = ACTION_LAYER_TAP_KEY(1, KC_CAPS), + [28] = ACTION_MODS_TAP_KEY(MOD_RCTL,KC_BSLS), + //[29] = ACTION_LAYER_TOGGLE(4), + [29] = ACTION_MODS_TAP_KEY(MOD_RSFT,KC_ESC), + [30] = ACTION_LAYER_TAP_KEY(1, KC_QUOT), + [31] = ACTION_LAYER_MOMENTARY(2), + //[] = ACTION_LAYER_TAP_KEY(4, KC_S), +}; + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + + +void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) +{ + + if (id == TEENSY_KEY) { + clear_keyboard(); + print("\n\nJump to bootloader... "); + wait_ms(250); + bootloader_jump(); // should not return + print("not supported.\n"); + } +} diff --git a/keyboards/ergodox/keymaps/guni/readme.txt b/keyboards/ergodox/keymaps/guni/readme.txt new file mode 100644 index 0000000000..93ae5f0567 --- /dev/null +++ b/keyboards/ergodox/keymaps/guni/readme.txt @@ -0,0 +1,133 @@ +My main layout (Layer 0) is based on qwerty. I tried to fit the layout of the kinesis keyboard onto the ergodox. Furthermore I did some tweaks. +The other layers are seldom used. Except the F Keys and the teensy key. As I own a ergodox I cant press the reset button, so i need a key to send the teensy into reprogram mode. +There is a layer with symbols a numpad. These layers are seldom used. Except the F Keys and the teensy key. As I own a ergodox I need a key to reprogram, because I can't access the reset button. + +I am a linux user and need the esc key and str keys often therefore it is easyly accessed. Switching console str+alt+tab+f2 (layer 2 and 2) is tricky but you get it after a while. +As I live in germany and need to type umlaut frquently, i mapped the CAPS to the meta key, and swapped ' and ". So I can type ö with CAPS o + ¨. no need to press o+SHIFT+' +As a note for linux users i use str+p to get last command, instead of using the cursor keys. + +HOWTO to convert CAPS to Meta-Key and swap ' with " + +* create file with following content +.Xmodmap + clear Lock + keycode 48 = quotedbl apostrophe quotedbl apostrophe + keycode 66 = Multi_key + +* apply with +xmodmap .Xmodmap + +* convert to xkbmap +xkbcomp $DISPLAY $HOME/.xkbmap + +* automatic startup each time you startup x +echo 'xkbcomp $HOME/.xkbmap $DISPLAY' >> ~/.xinitrc + + KEYMAP( // layer 0 : default + // left hand + KC_EQL , KC_1, KC_2, KC_3, KC_4, KC_5, KC_LBRC, + KC_FN25 , KC_Q, KC_W, KC_E, KC_R, KC_T, KC_HOME, + KC_FN27 , KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_PGUP, + KC_LGUI , KC_GRV,KC_LEFT,KC_RGHT,KC_LALT, + KC_NO , KC_NO , + KC_NO , + KC_BSPC,KC_DEL ,KC_FN23, + // right hand + KC_RBRC , KC_6, KC_7 , KC_8, KC_9, KC_0, KC_MINS, + KC_END , KC_Y, KC_U , KC_I, KC_O, KC_P, KC_FN28, + KC_H , KC_J, KC_K , KC_L, KC_SCLN,KC_FN30, + KC_PGDN , KC_N, KC_M , KC_COMM,KC_DOT, KC_SLSH,KC_FN29, + KC_RALT , KC_DOWN,KC_UP, KC_NO ,KC_RGUI, + KC_NO , KC_NO, + KC_NO , + KC_FN29,KC_ENT ,KC_SPC + ), + + KEYMAP( // layer 1 : function and symbol keys + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, + KC_TRNS,KC_AT,KC_UNDS ,KC_LBRC,KC_RBRC,KC_CIRC ,KC_TRNS, + KC_TRNS,KC_BSLS,KC_SLSH,KC_LCBR ,KC_RCBR ,KC_ASTR, + KC_TRNS,KC_HASH ,KC_DLR ,KC_PIPE ,KC_TILD ,KC_GRV ,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_FN1, + // right hand + KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS,KC_EXLM,LSFT(KC_COMM),LSFT(KC_DOT),KC_EQL,KC_AMPR, KC_TRNS, + LSFT(KC_SLSH),KC_LPRN,KC_RPRN,KC_MINS,LSFT(KC_SCLN),KC_TRNS, + KC_TRNS,KC_PLUS,LSFT(KC_5),LSFT(KC_QUOT),KC_QUOT,KC_SCLN,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + + KEYMAP( // layer 2: navigation + // left hand + KC_NO,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_PGUP,KC_HOME,KC_UP ,KC_END,KC_NO ,KC_TRNS, + KC_TRNS,KC_PGDN,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO,KC_NO,KC_NO, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_FN1 , + // right hand + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS ,KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_END ,KC_TRNS, + KC_NO, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT,KC_TRNS, + KC_TRNS,KC_TRNS, KC_HOME, KC_UP, KC_END, KC_PGUP,KC_TRNS, + KC_LEFT, KC_DOWN,KC_RGHT,KC_PGDN,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + KEYMAP( // layer 3 : teensy bootloader functions + // left hand + KC_FN0, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_FN1 , + // right hand + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + + + KEYMAP( // layer 4: numpad + // left hand + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS,KC_NLCK,KC_PSLS,KC_PAST,KC_PAST,KC_PMNS,KC_BSPC, + KC_TRNS,KC_NO, KC_P7, KC_P8, KC_P9, KC_PMNS,KC_BSPC, + KC_NO, KC_P4, KC_P5, KC_P6, KC_PPLS,KC_PENT, + KC_TRNS,KC_NO, KC_P1, KC_P2, KC_P3, KC_PPLS,KC_PENT, + KC_P0, KC_PDOT,KC_SLSH,KC_PENT,KC_PENT, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + +}; + + diff --git a/keyboards/ergodox/keymaps/italian/keymap.c b/keyboards/ergodox/keymaps/italian/keymap.c new file mode 100644 index 0000000000..e4c7a569cb --- /dev/null +++ b/keyboards/ergodox/keymaps/italian/keymap.c @@ -0,0 +1,223 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + EPRM, + VRSN, + RGB_SLD +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | \ | 1 | 2 | 3 | 4 | 5 | ESC | | T2 | 6 | 7 | 8 | 9 | 0 | ' | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | TT1 | | TT1 | Y | U | I | O | P | è | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Caps | A | S | D | F | G |------| |------| H | J | K | L | ò | à | + * |--------+------+------+------+------+------| Alt | | Alt |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | ù |-/RShift| + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |</Win | + | - | * |//Ctr | |ì/RAlt| Left | Down | Up | Right | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | Ins | LGui | | Win | Ctrl | + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * |Backsp| Del |------| |------| Enter |Space | + * |ace | | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TT(SYMB), + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, + MT(MOD_LGUI,KC_NONUS_BSLASH),KC_PPLS, KC_PMNS,KC_PAST,MT(MOD_LCTL,KC_PSLS), + KC_INS, KC_LGUI, + KC_HOME, + KC_BSPC,KC_DEL, KC_END, + // right hand + TG(MDIA), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TT(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LALT, KC_N, KC_M, KC_COMM,KC_DOT, KC_BSLASH, MT(MOD_RSFT,KC_SLSH), + MT(MOD_RALT,KC_EQL), KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT, + KC_LGUI, KC_RCTL, + KC_PGUP, + KC_PGDN, KC_ENT, KC_SPC + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | | 7 | 8 | 9 | | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | [ | ] | & |------| |------| | 4 | 5 | 6 | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | ( | ) | | | | | | 1 | 2 | 3 | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | . | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | 0 | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS, KC_EXLM, RALT(KC_SCLN), RALT(KC_LCBR), RALT(KC_RCBR), KC_TILD, KC_TRNS, + KC_TRNS, RALT(KC_QUOT), KC_DLR, RALT(KC_LBRC), RALT(KC_RBRC), KC_CIRC, + KC_TRNS, KC_PERC, LSFT(KC_EQL), LSFT(KC_8), LSFT(KC_9), KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_TRNS, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_DOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_0 +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | Lclk | Rclk | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_BTN1, KC_BTN2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + case 1: + if (record->event.pressed) { // For resetting EEPROM + eeconfig_init(); + } + break; + } + return MACRO_NONE; +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case EPRM: + if (record->event.pressed) { + eeconfig_init(); + } + return false; + break; + case VRSN: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + return false; + break; + case RGB_SLD: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_mode(1); + #endif + } + return false; + break; + } + return true; +} + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/italian/readme.md b/keyboards/ergodox/keymaps/italian/readme.md new file mode 100644 index 0000000000..215c24a5af --- /dev/null +++ b/keyboards/ergodox/keymaps/italian/readme.md @@ -0,0 +1,72 @@ +# ErgoDox Italian layout + +## Layer 0 +``` + + ,--------------------------------------------------. ,--------------------------------------------------. + | \ | 1 | 2 | 3 | 4 | 5 | ESC | | T2 | 6 | 7 | 8 | 9 | 0 | ' | + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | Tab | Q | W | E | R | T | TT1 | | TT1 | Y | U | I | O | P | è | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | Caps | A | S | D | F | G |------| |------| H | J | K | L | ò | à | + |--------+------+------+------+------+------| Alt | | Alt |------+------+------+------+------+--------| + | LShift | Z | X | C | V | B | | | | N | M | , | . | ù |-/RShift| + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + |</Win | + | - | * |//Ctr | |ì/RAlt| Left | Down | Up | Right | ~L1 | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | Ins | LGui | | Win | Ctrl | + ,------|------|------| |------+--------+------. + | | | Home | | PgUp | | | + |Backsp| Del |------| |------| Enter |Space | + |ace | | End | | PgDn | | | + `--------------------' `----------------------' +``` + +## Layer 1 +``` + + ,--------------------------------------------------. ,--------------------------------------------------. + |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | | ! | @ | { | } | | | | | | | 7 | 8 | 9 | | F12 | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | # | $ | [ | ] | & |------| |------| | 4 | 5 | 6 | | | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | % | ^ | ( | ) | | | | | | 1 | 2 | 3 | | | + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | | | | . | | | | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+------+------. + | | | | | | | | + | | |------| |------| | 0 | + | | | | | | | | + `--------------------' `--------------------' +``` + +## Layer 2 +``` + + ,--------------------------------------------------. ,--------------------------------------------------. + | | | | | | | | | | | | | | | | + |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + | | | | MsUp | | | | | | Lclk | Rclk | | | | | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + | | | | | | | | | | | | Prev | Next | | | + `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | | | |VolUp |VolDn | Mute | | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+------+------. + | | | | | | |Brwser| + | | |------| |------| |Back | + | | | | | | | | + `--------------------' `--------------------' +``` + + diff --git a/keyboards/ergodox/keymaps/neo2_on_qwertz_hardware/keymap.c b/keyboards/ergodox/keymaps/neo2_on_qwertz_hardware/keymap.c new file mode 100644 index 0000000000..ab2464c424 --- /dev/null +++ b/keyboards/ergodox/keymaps/neo2_on_qwertz_hardware/keymap.c @@ -0,0 +1,408 @@ +#include "ergodox.h" +#include "action_layer.h" +#include "keymap_extras/keymap_german.h" + +#define UM 0 + +#define L0 0 // layer_0 +#define L1 1 // layer_1 +#define L2 2 // layer_2 +#define L3 3 // layer_3 +#define L4 4 // layer_4 +#define L5 5 // layer_5 +#define L6 6 // layer_6 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* + .------------------------------------.------------------------------------. + |ESC | 1 | 2 | 3 | 4 | 5 | ´ | ` | 6 | 7 | 8 | 9 | 0 | ^ | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + |TAB | X | V | L | C | W |Print| | K | H | G | F | Q | ß | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + |MO(1)| U | I | A | E | O |-----!-----! S | N | R | T | D | Y | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + |LSFT | ü | ö | ä | P | Z |SPACE| | B | M | , | . | J |RSFT | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + |LCTL|LGUI|LALT|MO(3)|MO(2)| !MO(2)|MO(3)|APP |RALT|RCTL| + '------------------------' '------------------------' + .-----------. .-----------. + |VOL- |VOL+ | !MUTE |PLAY | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! |-----| !-----| ! ! + ! CTL ! ! ALT ! ! CTL ! ! ALT ! + |ENTER|MO(1)| TAB | !ESC |MO(1)|SPACE| + '-----------------' '-----------------' + */ +[L0] = KEYMAP( + KC_ESC, DE_1, DE_2, DE_3, DE_4, DE_5, DE_ACUT, + KC_TAB, DE_X, DE_V, DE_L, DE_C, DE_W, KC_PSCR, + MO(1), DE_U, DE_I, DE_A, DE_E, DE_O, + KC_LSFT, DE_UE, DE_OE, DE_AE, DE_P, DE_Z, KC_SPACE, + KC_LCTL, KC_LGUI, KC_LALT, MO(3), MO(2), + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_VOLD, KC_VOLU, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ CTL_T(KC_ENTER), MO(1), ALT_T(KC_TAB), + DE_GRV, DE_6, DE_7, DE_8, DE_9, DE_0, DE_CIRC, + KC_TRNS, DE_K, DE_H, DE_G, DE_F, DE_Q, DE_SS, + /*-*/ DE_S, DE_N, DE_R, DE_T, DE_D, DE_Y, + KC_TRNS, DE_B, DE_M, DE_COMM, DE_DOT, DE_J, KC_RSFT, + /*-*/ /*-*/ MO(2), MO(3), KC_APP, KC_RALT, KC_RCTL, + KC_MUTE, KC_MPLY, + KC_TRNS, + CTL_T(KC_ESC), MO(1), ALT_T(KC_SPACE) +), +/* + .------------------------------------.------------------------------------. + | | | | | | | | | | | | | | | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + | | € | _ | [ | ] | | | | ! | < | > | = | & | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | \ | / | { | } | * |-----!-----! ? | ( | ) | - | : | @ | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | # | $ | | | ~ | | | | + | % | " | ' | ; | | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | | | | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' + */ +[L1] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, DE_EURO, DE_UNDS, DE_LBRC, DE_RBRC, KC_TRNS, KC_TRNS, + KC_TRNS, DE_BSLS, DE_SLSH, DE_LCBR, DE_RCBR, DE_ASTR, + KC_TRNS, DE_HASH, DE_DLR, DE_PIPE, DE_TILD, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, DE_EXLM, DE_LESS, DE_MORE, DE_EQL, DE_AMPR, KC_TRNS, + /*-*/ DE_QST, DE_LPRN, DE_RPRN, DE_MINS, DE_COLN, DE_AT, + KC_TRNS, DE_PLUS, DE_PERC, DE_DQOT, DE_QUOT, DE_SCLN, KC_TRNS, + /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* + * .------------------------------------.------------------------------------. + * | | | | | | | | | | | | | | | + * !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + * | |PGUP|BSPC| UP |DEL |PGDN| | | | 7 | 8 | 9 | | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | |HOME|LEFT|DOWN|RGHT|END |-----!-----! | 4 | 5 | 6 | | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | |PREV|NEXT| | | | | 1 | 2 | 3 | | | + * '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + * | | | | | | ! | | | | | + * '------------------------' '------------------------' + * .-----------. .-----------. + * | | | ! | | + * .-----+-----+-----! !-----+-----+-----. + * ! ! | | ! | ! ! + * ! ! !-----! !-----! ! ! + * | | | | ! | | 0 | + * '-----------------' '-----------------' + */ +[L2] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_PGUP, KC_BSPC, KC_UP, KC_DEL, KC_PGDN, KC_TRNS, + KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, DE_7, DE_8, DE_9, KC_TRNS, KC_TRNS, + /*-*/ KC_TRNS, DE_4, DE_5, DE_6, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, DE_1, DE_2, DE_3, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, DE_0 +), +/* + * .------------------------------------.------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | | | | | | | | + * !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + * | | F7 | F8 | F9 | F10| F11| F12 | | |M_WU|M_CU|M_WD| | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * |M_B5 |M_B4|M_B3|M_B2|M_B1| |-----!-----! |M_CL|M_CD|M_CR| | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | |M_A2|M_A1|M_A0| | | | | | | | | | + * '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + * | | | | | | ! | | | | | + * '------------------------' '------------------------' + * .-----------. .-----------. + * | | | ! | | + * .-----+-----+-----! !-----+-----+-----. + * ! ! | | ! | ! ! + * ! ! !-----! !-----! ! ! + * | | | | ! | | | + * '-----------------' '-----------------' + */ +[L3] = KEYMAP( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, + KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_BTN1, KC_TRNS, + KC_TRNS, KC_TRNS, KC_ACL2, KC_ACL1, KC_ACL0, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_WH_U, KC_MS_U, KC_WH_D, KC_TRNS, KC_TRNS, + /*-*/ KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* + * .------------------------------------.------------------------------------. + * | | | | | | | | | | | | | | | + * !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + * | | | | | | | | | | | | | | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | | | | |-----!-----! | | | | | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | | | | | | | | | | | | | + * '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + * | | | | | | ! | | | | | + * '------------------------' '------------------------' + * .-----------. .-----------. + * | | | ! | | + * .-----+-----+-----! !-----+-----+-----. + * ! ! | | ! | ! ! + * ! ! !-----! !-----! ! ! + * | | | | ! | | | + * '-----------------' '-----------------' + */ +[L4] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* + * .------------------------------------.------------------------------------. + * | | | | | | | | | | | | | | | + * !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + * | | | | | | | | | | | | | | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | | | | |-----!-----! | | | | | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | | | | | | | | | | | | | + * '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + * | | | | | | ! | | | | | + * '------------------------' '------------------------' + * .-----------. .-----------. + * | | | ! | | + * .-----+-----+-----! !-----+-----+-----. + * ! ! | | ! | ! ! + * ! ! !-----! !-----! ! ! + * | | | | ! | | | + * '-----------------' '-----------------' + */ +[L5] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* + * .------------------------------------.------------------------------------. + * | | | | | | | | | | | | | | | + * !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + * | | | | | | | | | | | | | | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | | | | |-----!-----! | | | | | | + * !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + * | | | | | | | | | | | | | | | + * '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + * | | | | | | ! | | | | | + * '------------------------' '------------------------' + * .-----------. .-----------. + * | | | ! | | + * .-----+-----+-----! !-----+-----+-----. + * ! ! | | ! | ! ! + * ! ! !-----! !-----! ! ! + * | | | | ! | | | + * '-----------------' '-----------------' + */ +[L6] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, + /*-*/ /*-*/ /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + /*-*/ /*-*/ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = {}; + +#define UC_MODE_WIN 0 +#define UC_MODE_LINUX 1 +#define UC_MODE_OSX 2 + +// TODO: allow default mode to be configured +static uint16_t unicode_mode = UC_MODE_WIN; + +uint16_t hextokeycode(uint8_t hex) { + if (hex == 0x0) { + return KC_P0; + } + if (hex < 0xA) { + return KC_P1 + (hex - 0x1); + } + return KC_A + (hex - 0xA); +} + +void unicode_action_function(uint16_t hi, uint16_t lo) { + switch (unicode_mode) { + case UC_MODE_WIN: + register_code(KC_LALT); + + register_code(KC_PPLS); + unregister_code(KC_PPLS); + + register_code(hextokeycode((hi & 0xF0) >> 4)); + unregister_code(hextokeycode((hi & 0xF0) >> 4)); + register_code(hextokeycode((hi & 0x0F))); + unregister_code(hextokeycode((hi & 0x0F))); + register_code(hextokeycode((lo & 0xF0) >> 4)); + unregister_code(hextokeycode((lo & 0xF0) >> 4)); + register_code(hextokeycode((lo & 0x0F))); + unregister_code(hextokeycode((lo & 0x0F))); + + unregister_code(KC_LALT); + break; + case UC_MODE_LINUX: + register_code(KC_LCTL); + register_code(KC_LSFT); + + register_code(KC_U); + unregister_code(KC_U); + + register_code(hextokeycode((hi & 0xF0) >> 4)); + unregister_code(hextokeycode((hi & 0xF0) >> 4)); + register_code(hextokeycode((hi & 0x0F))); + unregister_code(hextokeycode((hi & 0x0F))); + register_code(hextokeycode((lo & 0xF0) >> 4)); + unregister_code(hextokeycode((lo & 0xF0) >> 4)); + register_code(hextokeycode((lo & 0x0F))); + unregister_code(hextokeycode((lo & 0x0F))); + + unregister_code(KC_LCTL); + unregister_code(KC_LSFT); + break; + case UC_MODE_OSX: + break; + } +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + if (!record->event.pressed) { + return MACRO_NONE; + } + // MACRODOWN only works in this function + switch(id) { + case UM: + unicode_mode = (unicode_mode + 1) % 2; + break; + + + default: + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case L1: + ergodox_right_led_1_on(); + break; + case L2: + ergodox_right_led_2_on(); + break; + case L3: + ergodox_right_led_3_on(); + break; + case L4: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + break; + case L5: + ergodox_right_led_1_on(); + ergodox_right_led_3_on(); + break; + // case L6: + // ergodox_right_led_2_on(); + // ergodox_right_led_3_on(); + // break; + // case L7: + // ergodox_right_led_1_on(); + // ergodox_right_led_2_on(); + // ergodox_right_led_3_on(); + // break; + default: + ergodox_board_led_off(); + break; + } +}; diff --git a/keyboards/ergodox/keymaps/neo2_on_qwertz_hardware/keymap.md b/keyboards/ergodox/keymaps/neo2_on_qwertz_hardware/keymap.md new file mode 100644 index 0000000000..d9fcda9661 --- /dev/null +++ b/keyboards/ergodox/keymaps/neo2_on_qwertz_hardware/keymap.md @@ -0,0 +1,194 @@ +# Neo2 for ErgoDox on QWERTZ +# +# Description +This layout is ment to be used on PCs with DE-de with an additional guest keyboard. E.g. on your PC at work you can use your ergodox with neo but a second keybord is plugged in so your coworkers can enter a few signs if necessary. I live in Germany, so this is my usecase. +# Layers +[Layer0](#layer-0) +Letters, modifiers and volume + +[Layer1](#layer-1) +Symbols + +[Layer2](#layer-2) +Motion, digits and next/prev Song + +[Layer3](#layer-3) +F1 to F12 and mouse actions + +[Layer4](#layer-4) +not used + +[Layer5](#layer-5) +not used + +[Layer6](#layer-6) +not used + + +## Layer 0 + + .------------------------------------.------------------------------------. + |ESC | 1 | 2 | 3 | 4 | 5 | ´ | ` | 6 | 7 | 8 | 9 | 0 | ^ | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + |TAB | X | V | L | C | W |Print| | K | H | G | F | Q | ß | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + |MO(1)| U | I | A | E | O |-----!-----! S | N | R | T | D | Y | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + |LSFT | ü | ö | ä | P | Z |SPACE| | B | M | , | . | J |RSFT | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + |LCTL|LGUI|LALT|MO(3)|MO(2)| !MO(2)|MO(3)|APP |RALT|RCTL| + '------------------------' '------------------------' + .-----------. .-----------. + |VOL- |VOL+ | !MUTE |PLAY | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! |-----| !-----| ! ! + ! CTL ! ! ALT ! ! CTL ! ! ALT ! + |ENTER|MO(1)| TAB | !ESC |MO(1)|SPACE| + '-----------------' '-----------------' + +* Left side ESC, TAB, [SymbolLayer], Shift, Ctr, Gui(Windows key), and Alt like normal QWERTZ with neo2. +* Space on right side of left half for mous activity so you don't have to leave the mouse for Space. +* Top row of thumb keys is hard to reach for me, so I put media control on there. +* Thumb keys make use of modifier/tap. E.g. if you tap the Enter key it will be Enter. If you keep it pressed down it will be Ctr. The hold action is written on top of the tap action. +* The small middle thumb keys are not used, es well as the 1.5 sized ones on the left side of the right half. + + +## Layer 1 + + .------------------------------------.------------------------------------. + | | | | | | | | | | | | | | | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + | | € | _ | [ | ] | | | | ! | < | > | = | & | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | \ | / | { | } | * |-----!-----! ? | ( | ) | - | : | @ | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | # | $ | | | ~ | | | | + | % | " | ' | ; | | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | | | | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' + + +## Layer 2 + + .------------------------------------.------------------------------------. + | | | | | | | | | | | | | | | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + | |PGUP|BSPC| UP |DEL |PGDN| | | | 7 | 8 | 9 | | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | |HOME|LEFT|DOWN|RGHT|END |-----!-----! | 4 | 5 | 6 | | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | |PREV|NEXT| | | | | 1 | 2 | 3 | | | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | | | | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | 0 | + '-----------------' '-----------------' + + + +## Layer 3 + + .------------------------------------.------------------------------------. + | | F1 | F2 | F3 | F4 | F5 | F6 | | | | | | | | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + | | F7 | F8 | F9 | F10| F11| F12 | | |M_WU|M_CU|M_WD| | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + |M_B5 |M_B4|M_B3|M_B2|M_B1| |-----!-----! |M_CL|M_CD|M_CR| | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | |M_A2|M_A1|M_A0| | | | | | | | | | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | | | | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' +* M_A Mouse acceleration +* M_B Mouse button +* M_C Mouse cursor +* M_W Mouse wheel + +## Layer 4 + + + + .------------------------------------.------------------------------------. + | | | | | | | | | | | | | | | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + | | | | | | | | | | | | | | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | | | | |-----!-----! | | | | | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | | | | | | | | | | | | | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | | | | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' + + +## Layer 5 + + + .------------------------------------.------------------------------------. + | | | | | | | | | | | | | | | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + | | | | | | | | | | | | | | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | | | | |-----!-----! | | | | | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | | | | | | | | | | | | | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | | | | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' + + +## Layer 6 + + .------------------------------------.------------------------------------. + | | | | | | | | | | | | | | | + !-----+----+----+----+----+----------!-----+----+----+----+----+----+-----! + | | | | | | | | | | | | | | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | | | | |-----!-----! | | | | | | + !-----+----+----+----x----x----! ! !----x----x----+----+----+-----! + | | | | | | | | | | | | | | | + '-----+----+----+----+----+----------'----------+----+----+----+----+-----' + | | | | | | ! | | | | | + '------------------------' '------------------------' + .-----------. .-----------. + | | | ! | | + .-----+-----+-----! !-----+-----+-----. + ! ! | | ! | ! ! + ! ! !-----! !-----! ! ! + | | | | ! | | | + '-----------------' '-----------------' + diff --git a/keyboards/ergodox/keymaps/reset_eeprom/keymap.c b/keyboards/ergodox/keymaps/reset_eeprom/keymap.c index f708454ce2..8d68976585 100644 --- a/keyboards/ergodox/keymaps/reset_eeprom/keymap.c +++ b/keyboards/ergodox/keymaps/reset_eeprom/keymap.c @@ -111,7 +111,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { // Runs just one time when the keyboard initializes. void matrix_init_user(void) { - + eeconfig_init(); }; diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 45b3354c1c..3d6fb455a0 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -1,6 +1,6 @@ # The Easy Way -If you have an ErgoDox EZ, the absolute easiest way for you to customize your firmware is using the [graphical configurator](http://configure.ergodox-ez.com), which uses QMK under the hood. +If you have an ErgoDox EZ, the absolute easiest way for you to customize your firmware is using the [graphical configurator](http://configure.ergodox-ez.com), which uses QMK under the hood. If you can find firmware someone else has made that does what you want, that is the easiest way to customize your ErgoDox. It requires no programming @@ -69,12 +69,16 @@ files. Check them out with: The Ez uses the [Teensy Loader](https://www.pjrc.com/teensy/loader.html). -Linux users need to modify udev rules as described on the Teensy Linux page. -Some distributions provide a binary, maybe called `teensy-loader-cli`). +Linux users need to modify udev rules as described on the [Teensy +Linux page]. Some distributions provide a binary, maybe called +`teensy-loader-cli`. + +[Teensy Linux page]: https://www.pjrc.com/teensy/loader_linux.html To flash the firmware: - - Build the firmware with `make keymapname`, for example `make default` + - Build the firmware with `make keymapname`, for example `make default` + - This will result in a hex file called `ergodox_ez_keymapname.hex`, e.g. `ergodox_ez_default.hex` @@ -87,6 +91,15 @@ To flash the firmware: - Click the button in the Teensy app to download the firmware. +To flash with ´teensy-loader-cli´: + + - Build the firmware with `make keymapname`, for example `make default` + + - Run ´<path/to/>teensy_loader_cli --mcu=atmega32u4 -w ergodox_ez_<keymap>.hex´ + + - Press the Reset button by inserting a paperclip gently into the reset hole + in the top right corder. + ## ErgoDox Infinity The Infinity is two completely independent keyboards, and needs to be flashed @@ -100,7 +113,7 @@ for the left and right halves seperately. To flash them: - Install the firmware with `sudo make infinity-keymapname-dfu-util` - - Build left hand firmware with `make infinity-keymapname MASTER=right` + - Build right hand firmware with `make infinity-keymapname MASTER=right` - Plug in the right hand keyboard only. diff --git a/keyboards/lets_split/rev2fliphalf/Makefile b/keyboards/frosty_flake/Makefile index 4e2a6f00fd..57b2ef62e5 100644 --- a/keyboards/lets_split/rev2fliphalf/Makefile +++ b/keyboards/frosty_flake/Makefile @@ -1,3 +1,3 @@ ifndef MAKEFILE_INCLUDED include ../../Makefile -endif
\ No newline at end of file +endif diff --git a/keyboards/frosty_flake/config.h b/keyboards/frosty_flake/config.h new file mode 100644 index 0000000000..2c73f10743 --- /dev/null +++ b/keyboards/frosty_flake/config.h @@ -0,0 +1,147 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Bathroom Epiphanies +#define PRODUCT frosty_flake +#define DESCRIPTION Frosty Flake controller for the CM Storm Quick Fire Rapid + +/* + * Frosty Flake Rev. 20140521 made by Bathroom Ephiphanies + * Ported from the Bathroom Epiphanies TMK Firmware: + * https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers + * + */ + +/* key matrix size */ +#define MATRIX_ROWS 8 // Row0 - Row7 in the schematic +#define MATRIX_COLS 18 // ColA - ColR in the schematic + +/* + * Keyboard Matrix Assignments + */ +#define UNUSED_PINS { B0, C4, D3 } + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/frosty_flake/frosty_flake.c b/keyboards/frosty_flake/frosty_flake.c new file mode 100644 index 0000000000..1cd4760389 --- /dev/null +++ b/keyboards/frosty_flake/frosty_flake.c @@ -0,0 +1,63 @@ +#include "frosty_flake.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + DDRB |= (1<<7); + DDRC |= (1<<5) | (1<<6); + + print_dec(usb_led); + + if (usb_led & (1<<USB_LED_CAPS_LOCK)) + PORTC &= ~(1<<5); + else + PORTC |= (1<<5); + + if (usb_led & (1<<USB_LED_NUM_LOCK)) + PORTB &= ~(1<<7); + else + PORTB |= (1<<7); + + if (usb_led & (1<<USB_LED_SCROLL_LOCK)) + PORTC &= ~(1<<6); + else + PORTC |= (1<<6); + + led_set_user(usb_led); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +__attribute__ ((weak)) +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +__attribute__ ((weak)) +void led_set_user(uint8_t usb_led) { +}
\ No newline at end of file diff --git a/keyboards/frosty_flake/frosty_flake.h b/keyboards/frosty_flake/frosty_flake.h new file mode 100644 index 0000000000..3b52df6baa --- /dev/null +++ b/keyboards/frosty_flake/frosty_flake.h @@ -0,0 +1,50 @@ +#ifndef FROSTY_FLAKE_H +#define FROSTY_FLAKE_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array + +/* + Matrix col/row mapping + + ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. + | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 | + `----' `-------------------' `-------------------' `-------------------' `--------------' + ,-------------------------------------------------------------------------. ,--------------. ,-------------------. + | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 | + |-------------------------------------------------------------------------| |--------------| |-------------------| + | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 | + |-------------------------------------------------------------------------| '--------------' |-------------- | + | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | | K2 | L2 | Q2 | | + |-------------------------------------------------------------------------| ,----. |-------------------| + | N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | | K3 | L3 | Q3 | O3 | + |-------------------------------------------------------------------------| ,--------------. |-------------- | + | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6 | Q6 | | + `-------------------------------------------------------------------------' `--------------' `-------------------' +*/ +#define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{ \ +/* Columns and rows need to be swapped in the below definition */ \ +/* A B C D E F G H I J K L M N O P Q R */ \ +/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KQ0, KR0 }, \ +/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1, KC_NO, KC_NO, KC_NO, KC_NO, KQ1, KC_NO }, \ +/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KC_NO, KN2, KC_NO, KP2, KQ2, KR2 }, \ +/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KQ3, KR3 }, \ +/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \ +/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KC_NO, KC_NO, KO5, KC_NO, KQ5, KR5 }, \ +/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO, KC_NO, KO6, KC_NO, KQ6, KR6 }, \ +/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \ +} + +#endif diff --git a/keyboards/frosty_flake/keymaps/default/Makefile b/keyboards/frosty_flake/keymaps/default/Makefile new file mode 100644 index 0000000000..9d3df5964f --- /dev/null +++ b/keyboards/frosty_flake/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/frosty_flake/keymaps/default/config.h b/keyboards/frosty_flake/keymaps/default/config.h new file mode 100644 index 0000000000..8893d122e0 --- /dev/null +++ b/keyboards/frosty_flake/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/frosty_flake/keymaps/default/keymap.c b/keyboards/frosty_flake/keymaps/default/keymap.c new file mode 100644 index 0000000000..4dc7ed655f --- /dev/null +++ b/keyboards/frosty_flake/keymaps/default/keymap.c @@ -0,0 +1,11 @@ +#include "frosty_flake.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ + KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT) +};
\ No newline at end of file diff --git a/keyboards/frosty_flake/keymaps/default/readme.md b/keyboards/frosty_flake/keymaps/default/readme.md new file mode 100644 index 0000000000..11bf4825ff --- /dev/null +++ b/keyboards/frosty_flake/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for frosty_flake diff --git a/keyboards/frosty_flake/matrix.c b/keyboards/frosty_flake/matrix.c new file mode 100644 index 0000000000..05dffdb643 --- /dev/null +++ b/keyboards/frosty_flake/matrix.c @@ -0,0 +1,135 @@ +/* + Copyright 2017 Gabriel Young <gabeplaysdrums@live.com> + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + +#ifndef DEBOUNCING_DELAY +# define DEBOUNCING_DELAY 5 +#endif +static uint8_t debouncing = DEBOUNCING_DELAY; + +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t scan_col(void) { + return ( + (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<0)) | + (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<1)) | + (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<2)) | + (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<3)) | + (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<4)) | + (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<5)) | + (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<6)) | + (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<7)) + ); +} + +static void select_col(uint8_t col) { + switch (col) { + case 0: PORTD = (PORTD & ~0b01111011) | 0b00011011; break; + case 1: PORTD = (PORTD & ~0b01111011) | 0b01000011; break; + case 2: PORTD = (PORTD & ~0b01111011) | 0b01101010; break; + case 3: PORTD = (PORTD & ~0b01111011) | 0b01111001; break; + case 4: PORTD = (PORTD & ~0b01111011) | 0b01100010; break; + case 5: PORTD = (PORTD & ~0b01111011) | 0b01110001; break; + case 6: PORTD = (PORTD & ~0b01111011) | 0b01100001; break; + case 7: PORTD = (PORTD & ~0b01111011) | 0b01110000; break; + case 8: PORTD = (PORTD & ~0b01111011) | 0b01100000; break; + case 9: PORTD = (PORTD & ~0b01111011) | 0b01101000; break; + case 10: PORTD = (PORTD & ~0b01111011) | 0b00101011; break; + case 11: PORTD = (PORTD & ~0b01111011) | 0b00110011; break; + case 12: PORTD = (PORTD & ~0b01111011) | 0b00100011; break; + case 13: PORTD = (PORTD & ~0b01111011) | 0b01111000; break; + case 14: PORTD = (PORTD & ~0b01111011) | 0b00010011; break; + case 15: PORTD = (PORTD & ~0b01111011) | 0b01101001; break; + case 16: PORTD = (PORTD & ~0b01111011) | 0b00001011; break; + case 17: PORTD = (PORTD & ~0b01111011) | 0b00111011; break; + } +} + +void matrix_init(void) { + /* Row output pins */ + DDRD |= 0b01111011; + /* Column input pins */ + DDRC &= ~0b10000000; + DDRB &= ~0b01111111; + PORTC |= 0b10000000; + PORTB |= 0b01111111; + + for (uint8_t i=0; i < MATRIX_ROWS; i++) + matrix[i] = matrix_debouncing[i] = 0; + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + select_col(col); + _delay_us(3); + matrix_row_t col_scan = scan_col(); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col); + bool curr_bit = col_scan & (1<<row); + if (prev_bit != curr_bit) { + matrix_debouncing[row] ^= ((matrix_row_t)1<<col); + debouncing = DEBOUNCING_DELAY; + } + } + } + + if (debouncing) { + if (--debouncing) + _delay_ms(1); + else + for (uint8_t i = 0; i < MATRIX_ROWS; i++) + matrix[i] = matrix_debouncing[i]; + } + + matrix_scan_quantum(); + return 1; +} + +inline matrix_row_t matrix_get_row(uint8_t row) { + return matrix[row]; +} + +void matrix_print(void) { + print("\nr\\c ABCDEFGHIJKLMNOPQR\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + matrix_row_t matrix_row = matrix_get_row(row); + xprintf("%02X: ", row); + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + bool curr_bit = matrix_row & (1<<col); + xprintf("%c", curr_bit ? '*' : '.'); + } + print("\n"); + } +} + +uint8_t matrix_key_count(void) { + uint8_t count = 0; + for (uint8_t row = 0; row < MATRIX_ROWS; row++) + count += bitpop32(matrix[row]); + return count; +}
\ No newline at end of file diff --git a/keyboards/frosty_flake/readme.md b/keyboards/frosty_flake/readme.md new file mode 100644 index 0000000000..ff440e33b6 --- /dev/null +++ b/keyboards/frosty_flake/readme.md @@ -0,0 +1,32 @@ +frosty_flake keyboard firmware +====================== + +This is the firmware for Rev. 20140521 of the Frosty Flake controller by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), a replacement controller for the [Cooler Master Quick Fire Rapid](http://www.coolermaster.com/peripheral/keyboards/quickfirerapid/). + +The code was adapted from the [BathroomEpiphanies TMK Firmware](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers), but has been cleaned up to match the [schematic](https://deskthority.net/wiki/File:Frosty_Flake_Schematics.pdf) and gone through some minor refactoring for QMK. + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/frosty_flake folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|<name>] +``` + +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/frosty_flake/rules.mk b/keyboards/frosty_flake/rules.mk new file mode 100644 index 0000000000..dd2f4b6eec --- /dev/null +++ b/keyboards/frosty_flake/rules.mk @@ -0,0 +1,71 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches + +CUSTOM_MATRIX = yes +SRC += matrix.c
\ No newline at end of file diff --git a/keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.c b/keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.c new file mode 100644 index 0000000000..4c735a6c29 --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.c @@ -0,0 +1 @@ +#include "MS-sculpt-mobile.h" diff --git a/keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.h b/keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.h new file mode 100644 index 0000000000..1583dea6e8 --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.h @@ -0,0 +1,48 @@ +#ifndef MICROSOFT_SCULPT_MOBILE_H +#define MICROSOFT_SCULPT_MOBILE_H + +#include "quantum.h" + + +#define KEYMAP( \ + k7Q, k6O, k6P, k6Q, k5O, k5P, k5Q, k7A, k7B, k7C, k7D, k7E, k7F, k1O, k1K, k1L, \ + k5A, k5K, k5L, k5M, k5N, k5H, k5I, k2A, k2B, k2C, k2D, k5B, k5C, k5J, k2E, \ + k6R, k6D, k6E, k6F, k7I, k7J, k4A, k4B, k4C, k4D, k3A, k3B, k3C, k3D, \ + k0J, k6A, k6B, k6C, k7H, k1A, k1B, k5D, k5E, k5F, k5G, k1C, k7P, k2G, \ + k2P, k7K, k7L, k7M, k7O, k0A, k0B, k0C, k0D, k0E, k0F, k2L, k6G, k1P,\ + k1Q, k4N, k3O,k6N, k3K, k0R, k1M, k6H, k6I, k6J \ +) \ +{ \ + {k0A, k0B, k0C, k0D, k0E, k0F, KC_NO, KC_NO, KC_NO, k0J, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,KC_NO, KC_NO, k0R},\ + {k1A, k1B, k1C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k1K, k1L, k1M, KC_NO, k1O, k1P, k1Q, KC_NO},\ + {k2A, k2B, k2C, k2D, k2E, KC_NO, k2G, KC_NO, KC_NO, KC_NO, KC_NO, k2L, KC_NO, KC_NO, KC_NO, k2P, KC_NO, KC_NO},\ + {k3A, k3B, k3C, k3D, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k3K, KC_NO, KC_NO, KC_NO, k3O, KC_NO, KC_NO, KC_NO},\ + {k4A, k4B, k4C, k4D, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k4N, KC_NO,KC_NO, KC_NO, KC_NO},\ + {k5A, k5B, k5C, k5D, k5E, k5F, k5G, k5H, k5I, k5J, k5K, k5L, k5M, k5N, k5O, k5P, k5Q, KC_NO },\ + {k6A, k6B, k6C, k6D, k6E, k6F, k6G, k6H, k6I, k6J, KC_NO, KC_NO, KC_NO, k6N, k6O, k6P, k6Q, k6R},\ + {k7A, k7B, k7C, k7D, k7E, k7F, KC_NO, k7H, k7I, k7J, k7K, k7L, k7M, KC_NO, k7O, k7P, k7Q, KC_NO},\ +} + + +#define MATRIX_TESTING_KEYMAP( \ + k0A, k0B, k0C, k0D, k0E, k0F, k0G, k0H, k0I, k0, k0J, k0K, k0L, k0M, k0N, k0O, k0P, k0Q,\ + k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, k1, k1J, k1K, k1L, k1M, k1N, k1O, k1P, k1Q,\ + k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, k2, k2J, k2K, k2L, k2M, k2N, k2O, k2P, k2Q,\ + k3A, k3B, k3C, k3D, k3E, k3F, k3G, k3H, k3I, k3, k3J, k3K, k3L, k3M, k3N, k3O, k3P, k3Q,\ + k4A, k4B, k4C, k4D, k4E, k4F, k4G, k4H, k4I, k4, k4J, k4K, k4L, k4M, k4N, k4O, k4P, k4Q,\ + k5A, k5B, k5C, k5D, k5E, k5F, k5G, k5H, k5I, k5, k5J, k5K, k5L, k5M, k5N, k5O, k5P, k5Q,\ + k6A, k6B, k6C, k6D, k6E, k6F, k6G, k6H, k6I, k6, k6J, k6K, k6L, k6M, k6N, k6O, k6P, k6Q,\ + k7A, k7B, k7C, k7D, k7E, k7F, k7G, k7H, k7I, k7, k7J, k7K, k7L, k7M, k7N, k7O, k7P, k7Q\ +) \ +{ \ + {k0A, k0B, k0C, k0D, k0E, k0F, k0G, k0H, k0I, k0, k0J, k0K, k0L, k0M, k0N, k0O, k0P, k0Q},\ + {k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, k1, k1J, k1K, k1L, k1M, k1N, k1O, k1P, k1Q},\ + {k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, k2, k2J, k2K, k2L, k2M, k2N, k2O, k2P, k2Q},\ + {k3A, k3B, k3C, k3D, k3E, k3F, k3G, k3H, k3I, k3, k3J, k3K, k3L, k3M, k3N, k3O, k3P, k3Q},\ + {k4A, k4B, k4C, k4D, k4E, k4F, k4G, k4H, k4I, k4, k4J, k4K, k4L, k4M, k4N, k4O, k4P, k4Q},\ + {k5A, k5B, k5C, k5D, k5E, k5F, k5G, k5H, k5I, k5, k5J, k5K, k5L, k5M, k5N, k5O, k5P, k5Q},\ + {k6A, k6B, k6C, k6D, k6E, k6F, k6G, k6H, k6I, k6, k6J, k6K, k6L, k6M, k6N, k6O, k6P, k6Q},\ + {k7A, k7B, k7C, k7D, k7E, k7F, k7G, k7H, k7I, k7, k7J, k7K, k7L, k7M, k7N, k7O, k7P, k7Q},\ +} + +#endif diff --git a/keyboards/handwired/MS-sculpt-mobile/Makefile b/keyboards/handwired/MS-sculpt-mobile/Makefile new file mode 100644 index 0000000000..bd09e5885d --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif diff --git a/keyboards/handwired/MS-sculpt-mobile/babblePaste.c b/keyboards/handwired/MS-sculpt-mobile/babblePaste.c new file mode 100644 index 0000000000..3a9b86997d --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/babblePaste.c @@ -0,0 +1,459 @@ +/* A library to output the right key shortcut in any common app. +Given a global variable babble_mode to show the environment and a +key that calls the paste macro, do the right type of paste. +Setting the context is done by another macro, or TBD interaction with the host. + +Huge thanks to https://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts +and https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/jeebak/keymap.c +*/ + +#include "babblePaste.h" +#include "action_macro.h" + +#ifdef USE_BABLPASTE + +// GLOBAL variable to determine mode. Sets startup default if no eeppom +uint8_t babble_mode =0 ; + +// small function that we might also want to call from a keymap. + +macro_t* switch_babble_mode( uint8_t id) { + babble_mode= id; + return MACRO_NONE; //less typing where called +} + + +// Today I learned that the preprocessor can not create a switch statement label from an argument +// And else statements have problems, see https://gcc.gnu.org/onlinedocs/gcc-3.0.1/cpp_3.html#SEC15 +#define BABLM(ent, macro...) \ + if ( ent == shortcut ) \ + { action_macro_play( MACRO(macro)); return MACRO_NONE; } + + +/* this function runs the appropriate babblepaste macro, given +the global babble_mode, and a shortcut from the ENUM in babblePaste.h +TODO, the pointers in this function should be stored in a PROGMEM array, not ram. +But that requires even more clever preprocessor foo. +*/ +const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { +/* + if ( shortcut < BABL_START_NUM || \ + shortcut >= (BABL_START_NUM + BABL_NUM_MACROS ) ) { + return MACRO_NONE; + } +*/ + + +#ifdef MS_MODE + if ( BABL_WINDOWS == shortcut ) { return switch_babble_mode(MS_MODE); } +#endif +#ifdef MAC_MODE + if ( BABL_MAC == shortcut) { return switch_babble_mode(MAC_MODE); } +#endif +#ifdef LINUX_MODE + if ( BABL_LINUX == shortcut ) { return switch_babble_mode(LINUX_MODE); } +#endif + #ifdef READMUX_MODE + if ( BABL_READLINE == shortcut ) { switch_babble_mode(READMUX_MODE); return MACRO_NONE; } +#endif +#ifdef VI_MODE + if ( BABL_VI == shortcut ) { return switch_babble_mode(VI_MODE); } +#endif +#ifdef EMACS_MODE + if ( BABL_EMACS == shortcut ) { return switch_babble_mode(EMACS_MODE); } +#endif + + + + switch(babble_mode) { + +#ifdef MS_MODE + + case MS_MODE: + BABLM( BABL_GO_LEFT_1C, T(LEFT), END ); + BABLM( BABL_GO_RIGHT_1C , T(RIGHT), END ); + BABLM( BABL_GO_LEFT_WORD, D(LCTL), T(LEFT), U(LCTL), END ); + BABLM( BABL_GO_RIGHT_WORD, D(LCTL), T(RIGHT), U(LCTL), END ); + BABLM( BABL_GO_START_LINE, T(HOME), END ); + BABLM( BABL_GO_END_LINE, T(END), END ); + BABLM( BABL_GO_START_DOC, D(LCTL),T(HOME), U(LCTL),END ); + BABLM( BABL_GO_END_DOC, D(LCTL),T(END), U(LCTL),END ); + BABLM( BABL_GO_NEXT_LINE, T(DOWN), END ); + BABLM( BABL_GO_PREV_LINE, T(UP), END ); + BABLM( BABL_PGDN, T(PGDN), END ); + BABLM( BABL_PGUP, T(PGUP), END ); + BABLM( BABL_DEL_RIGHT_1C, T(DEL), END ); + BABLM( BABL_DEL_LEFT_WORD, D(LCTL), T(BSPACE), U(LCTL), END ); + BABLM( BABL_DEL_RIGHT_WORD, D(LCTL), T(DEL), U(LCTL), END ); + BABLM( BABL_DEL_TO_LINE_END, D(RSFT), T(HOME), U(RSFT), T(DEL), END); + BABLM( BABL_DEL_TO_LINE_START, D(RSFT), T(END), U(RSFT), T(DEL), END ); +#ifndef BABL_MOVEMENTONLY + BABLM( BABL_UNDO, D(LCTL), T(Z), U(LCTL), END ); + BABLM( BABL_REDO, D(LCTL), T(Y), U(LCTL), END ); + BABLM( BABL_CUT, D(LCTL), T(X), U(LCTL), END ); + BABLM( BABL_COPY, D(LCTL), T(C), U(LCTL), END ); + BABLM( BABL_PASTE, D(LCTL), T(V), U(LCTL), END ); + BABLM( BABL_SELECT_ALL, D(LCTL), T(A), U(LCTL), END ); + BABLM( BABL_FIND, D(LCTL),T(F), U(LCTL),END ); + BABLM( BABL_FIND_NEXT, T(F3),END ); + BABLM( BABL_FIND_REPLACE, D(LCTL),T(H), U(LCTL),END ); + BABLM( BABL_RUNAPP, D(LGUI),T(R), U(LGUI),END ); + BABLM( BABL_SWITCH_APP_NEXT, D(LALT),T(TAB), U(LALT),END ); + BABLM( BABL_SWITCH_APP_LAST, D(LSFT),D(LALT),T(TAB), U(LALT), U(LSFT),END ); + BABLM( BABL_CLOSE_APP, D(LALT),T(F4), U(LALT),END ); + BABLM( BABL_HELP, T(F1),END ); +#ifndef BABL_NOBROWSER + BABLM( BABL_BROWSER_NEW_TAB, D(LCTL), T(T), U(LCTL),END ); + BABLM( BABL_BROWSER_CLOSE_TAB, D(LCTL), T(W), U(LCTL),END ); + BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LCTL), D(RSFT),T(T), U(RSFT),U(LCTL),END ); + BABLM( BABL_BROWSER_NEXT_TAB, D(LCTL), T(TAB), U(LCTL),END ); + BABLM( BABL_BROWSER_PREV_TAB, D(LCTL), D(RSFT), T(TAB), U(RSFT), U(LCTL),END ); + BABLM( BABL_BROWSER_URL_BAR, D(LCTL), T(L), U(LCTL),END ); + BABLM( BABL_BROWSER_FORWARD, D(LALT), T(RIGHT), U(LALT),END ); + BABLM( BABL_BROWSER_BACK, D(LALT), T(LEFT), U(LALT),END ); + BABLM( BABL_BROWSER_FIND, D(LCTL), T(F), U(LCTL),END ); + BABLM( BABL_BROWSER_BOOKMARK, D(LCTL), T(D), U(LCTL),END ); + //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LCTL),END ); // EDGE + BABLM( BABL_BROWSER_DEV_TOOLS, D(LCTL), T(T), U(LCTL),END ); // Chrome + // Chrome + BABLM( BABL_BROWSER_RELOAD, D(LCTL), T(F5), U(LCTL),END ); // hard reload w/o cache + BABLM( BABL_BROWSER_FULLSCREEN, T(F11),END ); //command shift F + BABLM( BABL_BROWSER_ZOOM_IN, D(LCTL), D(RSFT), T(EQL), U(RSFT), U(LCTL),END ); // ctr+ + + BABLM( BABL_BROWSER_ZOOM_OUT, D(LCTL), T(MINS), U(LCTL),END ); +#endif +#endif + + // Todo, ring bell, flash light, show user this isn't supported + return MACRO_NONE; + + +#endif /* MS_MODE*/ + + +#ifdef LINUX_MODE + + case LINUX_MODE: + BABLM( BABL_GO_LEFT_1C , T(LEFT), END ); + BABLM( BABL_GO_RIGHT_1C , T(RIGHT), END ); + BABLM( BABL_GO_LEFT_WORD , D(LCTL), T(LEFT), U(LCTL), END ); + BABLM( BABL_GO_RIGHT_WORD , D(LCTL), T(RIGHT), U(LCTL), END ); + BABLM( BABL_GO_START_LINE , T(HOME), END ); + BABLM( BABL_GO_END_LINE , T(END), END ); + BABLM( BABL_GO_START_DOC , D(LCTL),T(HOME), U(LCTL),END ); + BABLM( BABL_GO_END_DOC , D(LCTL),T(END), U(LCTL),END ); + BABLM( BABL_GO_NEXT_LINE , T(DOWN), END ); + BABLM( BABL_GO_PREV_LINE , T(UP), END ); + BABLM( BABL_PGDN , T(PGDN), END ); + BABLM( BABL_PGUP , T(PGUP), END ); + BABLM( BABL_DEL_RIGHT_1C , D(DEL), END ); + BABLM( BABL_DEL_LEFT_WORD , D(LCTL), T(BSPACE), U(LCTL), END ); + BABLM( BABL_DEL_RIGHT_WORD , D(LCTL), T(DEL), U(LCTL), END ); + BABLM( BABL_DEL_TO_LINE_END, D(RSFT), T(HOME), U(RSFT), T(DEL), END); + BABLM( BABL_DEL_TO_LINE_START, D(RSFT), T(END), U(RSFT), T(DEL), END ); +#ifndef BABL_MOVEMENTONLY + BABLM( BABL_UNDO , D(LCTL), T(Z), U(LCTL), END ); + BABLM( BABL_REDO , D(LCTL), T(Y), U(LCTL), END ); + BABLM( BABL_CUT , D(LCTL), T(X), U(LCTL), END ); + BABLM( BABL_COPY , D(LCTL), T(C), U(LCTL), END ); + BABLM( BABL_PASTE , D(LCTL), T(V), U(LCTL), END ); + BABLM( BABL_SELECT_ALL, D(LCTL), T(A), U(LCTL), END ); + BABLM( BABL_FIND, D(LCTL),T(F), U(LCTL),END ); + /* BABLM(BABL_FIND_NEXT , T(F3),END ); KDE */ + BABLM( BABL_FIND_NEXT, D(LCTL),T(G), U(LCTL),END ); // Gnome*/ + /* BABLM( , D(LCTL),T(R), U(LCTL),END ); KDE */ + BABLM( BABL_FIND_REPLACE, D(LCTL),T(H), U(LCTL),END ); // Gnome*/ + BABLM( BABL_RUNAPP, D(LALT),T(F2), U(LALT),END ); + BABLM( BABL_SWITCH_APP_NEXT, D(LCTL),T(TAB), U(LCTL),END ); + BABLM( BABL_SWITCH_APP_LAST, D(LSFT),D(LCTL),T(TAB), U(LCTL), U(LSFT),END ); + BABLM( BABL_CLOSE_APP, D(LALT),T(F4), U(LALT),END ); + //BABLM( BABL_HELP, END ); + +#ifndef BABL_NOBROWSER + BABLM( BABL_BROWSER_NEW_TAB, D(LCTL), T(T), U(LCTL),END ); + BABLM( BABL_BROWSER_CLOSE_TAB, D(LCTL), T(W), U(LCTL),END ); + BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LCTL), D(RSFT),T(T), U(RSFT),U(LCTL),END ); + BABLM( BABL_BROWSER_NEXT_TAB, D(LCTL), T(TAB), U(LCTL),END ); + BABLM( BABL_BROWSER_PREV_TAB, D(LCTL), D(RSFT), T(TAB), U(RSFT), U(LCTL),END ); + BABLM( BABL_BROWSER_URL_BAR, D(LCTL), T(L), U(LCTL),END ); + BABLM( BABL_BROWSER_FORWARD, D(LALT), T(RIGHT), U(LALT),END ); + BABLM( BABL_BROWSER_BACK, D(LALT), T(LEFT), U(LALT),END ); + BABLM( BABL_BROWSER_FIND, D(LCTL), T(F), U(LCTL),END ); + BABLM( BABL_BROWSER_BOOKMARK, D(LCTL), T(D), U(LCTL),END ); + BABLM( BABL_BROWSER_DEV_TOOLS, D(LCTL), T(T), U(LCTL),END ); // Chrome + BABLM( BABL_BROWSER_RELOAD, D(LCTL), T(F5), U(LCTL),END ); // hard reload w/o cache + BABLM( BABL_BROWSER_FULLSCREEN, T(F11),END ); //command shift F + BABLM( BABL_BROWSER_ZOOM_IN, D(LCTL), T(PLUS), U(LCTL),END ); + BABLM( BABL_BROWSER_ZOOM_OUT, D(LCTL), T(MINS), U(LCTL),END ); +#endif +#endif + return MACRO_NONE; + +#endif + +#ifdef MAC_MODE + + case MAC_MODE: + BABLM( BABL_GO_LEFT_1C , T(LEFT), END ); + BABLM( BABL_GO_RIGHT_1C, T(RIGHT), END ); + BABLM( BABL_GO_LEFT_WORD , D(LALT), T(LEFT), U(LALT), END ); + BABLM( BABL_GO_RIGHT_WORD , D(LALT), T(RIGHT), U(LALT), END ); + BABLM( BABL_GO_START_LINE , D(LGUI), T(LEFT), U(LGUI), END ); + BABLM( BABL_GO_END_LINE , D(LGUI), T(RIGHT), U(LGUI), END ); + BABLM( BABL_GO_START_DOC , D(LGUI),T(UP), U(LGUI),END ); + BABLM( BABL_GO_END_DOC , D(LGUI),T(DOWN), U(LGUI),END ); + BABLM( BABL_GO_NEXT_LINE , T(DOWN), END ); + BABLM( BABL_GO_PREV_LINE , T(UP), END ); + BABLM( BABL_PGDN , D(LALT),T(DOWN), U(LALT), END ); + BABLM( BABL_PGUP , D(LALT),T(UP), U(LALT), END ); + BABLM( BABL_DEL_RIGHT_1C , D(DEL), END ); + BABLM( BABL_DEL_LEFT_WORD , D(LALT), T(BSPACE), U(LALT), END ); + BABLM( BABL_DEL_RIGHT_WORD, D(LALT), T(DEL), U(LALT), END ); + BABLM( BABL_DEL_TO_LINE_END, D(LCTL), T(K), U(LCTL), END );// there must be another way + BABLM( BABL_DEL_TO_LINE_START, D(LGUI), T(BSPACE), U(LGUI), END ); +#ifndef BABL_MOVEMENTONLY + BABLM( BABL_UNDO , D(1), D(LGUI), T(Z), U(LGUI), END ); + BABLM( BABL_REDO , D(LSFT),D(LGUI), T(Z), U(LSFT),U(LGUI), END ); + BABLM( BABL_CUT , D(LGUI), T(X), U(LGUI), END ); + BABLM( BABL_COPY , D(LGUI), T(C), U(LGUI), END ); + BABLM( BABL_PASTE , D(LGUI), T(V), U(LGUI), END ); + BABLM( BABL_SELECT_ALL , D(LGUI), T(A), U(LGUI), END ); + BABLM( BABL_FIND , D(LGUI),T(F), U(LGUI),END ); + BABLM( BABL_FIND_NEXT, D(LGUI),T(G), U(LGUI),END ); + BABLM( BABL_FIND_REPLACE, D(LGUI),T(F), U(LGUI),END ); + BABLM( BABL_RUNAPP , D(LGUI),T(R), U(LGUI),END ); + BABLM( BABL_SWITCH_APP_NEXT , D(LGUI),T(TAB), U(LGUI),END ); + BABLM( BABL_SWITCH_APP_LAST , D(LSFT),D(LGUI),T(TAB), U(LGUI), U(LSFT),END ); + BABLM( BABL_CLOSE_APP , D(LGUI),T(Q), U(LGUI),END ); + BABLM( BABL_HELP , D(LSFT),D(LGUI),T(SLASH), U(LGUI), U(LSFT),END ); + +#ifndef BABL_NOBROWSER + BABLM( BABL_BROWSER_NEW_TAB, D(LGUI), T(T), U(LGUI),END ); + BABLM( BABL_BROWSER_CLOSE_TAB, D(LGUI), T(W), U(LGUI),END ); + BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LGUI), D(RSFT),T(T), U(RSFT),U(LGUI),END ); + BABLM( BABL_BROWSER_NEXT_TAB, D(LGUI),D(LALT), T(RIGHT),U(LALT), U(LGUI),END ); + BABLM( BABL_BROWSER_PREV_TAB, D(LGUI), D(RSFT), T(LEFT), U(RSFT), U(LGUI),END ); + BABLM( BABL_BROWSER_URL_BAR, D(LGUI), T(L), U(LGUI),END ); + BABLM( BABL_BROWSER_FORWARD, D(LGUI), T(RIGHT), U(LGUI),END ); + BABLM( BABL_BROWSER_BACK, D(LGUI), T(LEFT), U(LGUI),END ); + BABLM( BABL_BROWSER_FIND, D(LGUI), T(F), U(LGUI),END ); + BABLM( BABL_BROWSER_BOOKMARK, D(LGUI), T(D), U(LGUI),END ); + //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE + BABLM( BABL_BROWSER_DEV_TOOLS, D(LGUI), D(LALT), T(I), U(LALT),U(LGUI),END ); // Chrome + // Chrome + BABLM( BABL_BROWSER_RELOAD, D(LGUI), T(R), U(LGUI),END ); // add shift for reload w/o cache + BABLM( BABL_BROWSER_FULLSCREEN, D(LGUI), D(LCTL), T(P), U(LCTL), U(LGUI),END ); //command shift F + BABLM( BABL_BROWSER_ZOOM_IN, D(LGUI), D(RSFT), T(EQL), U(RSFT), U(LGUI),END ); // ctr+ + + BABLM( BABL_BROWSER_ZOOM_OUT, D(LGUI), T(MINS), U(LGUI),END ); +#endif +#endif + + return MACRO_NONE; +#endif + +#ifdef EMACS_MODE + + case EMACS_MODE: + switch(shortcut) { +//probably should allow meta to not be ALT + + BABLM( BABL_GO_LEFT_1C, T(LEFT), END ); + BABLM( BABL_GO_RIGHT_1C, T(RIGHT), END ); + BABLM( BABL_GO_LEFT_WORD, D(LALT), T(B), U(LALT), END ); + BABLM( BABL_GO_RIGHT_WORD , D(LALT), T(F), U(LALT), END ); + BABLM( BABL_GO_START_LINE , D(LCTL), T(A), U(LCTL), END ); + BABLM( BABL_GO_END_LINE , D(LCTL), T(E), U(LCTL), END ); + BABLM( BABL_GO_START_DOC , D(LALT), D(LSFT), T(COMM),U(LSFT), U(LALT) ,END ); + BABLM( BABL_GO_END_DOC , D(LALT), D(LSFT), T(DOT), U(LSFT), U(LALT) ,END ); + BABLM( BABL_GO_NEXT_LINE , D(LCTL), T(N), U(LCTL), END ); + BABLM( BABL_GO_PREV_LINE , D(LCTL), T(P), U(LCTL), END ); + BABLM( BABL_PGDN , D(LCTL), T(V), U(LCTL), END ); + BABLM( BABL_PGUP , D(LALT), T(V), U(LALT), END ); + BABLM( BABL_DEL_RIGHT_1C, D(LCTL), T(D), U(LCTL),END ); + BABLM( BABL_DEL_LEFT_WORD , D(LCTL), T(BSPACE), U(LCTL), END ); + BABLM( BABL_DEL_RIGHT_WORD , D(LALT), T(D), U(LALT), END ); + BABLM( BABL_DEL_TO_LINE_END, D(LCTL), T(K), U(LCTL), END ); + BABLM( BABL_DEL_TO_LINE_START, T(ESC), T(0), D(LCTL), T(K), U(LCTL), END ); +#ifndef BABL_MOVEMENTONLY + BABLM( BABL_UNDO , D(LCTL), T(X), U(LCTL),T(C), END ); + BABLM( BABL_REDO , D(LCTL), T(X), U(LCTL),T(C), END ); // arguably + BABLM( BABL_CUT , D(LCTL), T(W), U(LCTL), END ); + BABLM( BABL_COPY , D(LALT), T(W), U(LALT), END ); //really? + BABLM( BABL_PASTE , D(LCTL), T(Y), U(LCTL), END ); + BABLM( BABL_SELECT_ALL ,D(LCTL), T(X), U(LCTL),T(H), END ); + BABLM( BABL_FIND , D(LCTL), T(S), U(LCTL),END ); + BABLM( BABL_FIND_NEXT , D(LCTL), T(S), U(LCTL),END ); + BABLM( BABL_FIND_REPLACE , D(LALT),D(LSFT), T(5),U(LSFT), U(LALT), END ); + BABLM( BABL_RUNAPP , D(LALT), T(X), U(LALT),T(S),T(H),T(E),T(L),T(L),END );// arguably + BABLM( BABL_SWITCH_APP_NEXT , D(LCTL), T(X), U(LCTL),T(RIGHT), END ); // arguably + BABLM( BABL_SWITCH_APP_LAST , D(LCTL), T(X), U(LCTL),T(LEFT), END ); // arguably + BABLM( BABL_CLOSE_APP , D(LCTL), T(X), U(LCTL),T(C),END ); + BABLM( BABL_HELP , D(LCTL),T(H), U(LCTL),T(A),END); // start search in help +#ifndef BABL_NOBROWSER +/* you get to figure w3 out + BABLM( BABL_BROWSER_NEW_TAB, D(LGUI), T(T), U(LGUI),END ); + BABLM( BABL_BROWSER_CLOSE_TAB, D(LGUI), T(W), U(LGUI),END ); + BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LGUI), D(RSFT),T(T), U(RSFT),U(LGUI),END ); + BABLM( BABL_BROWSER_NEXT_TAB, D(LGUI),D(LALT), T(RIGHT),U(LALT), U(LGUI),END ); + BABLM( BABL_BROWSER_PREV_TAB, D(LGUI), D(RSFT), T(LEFT), U(RSFT), U(LGUI),END ); + BABLM( BABL_BROWSER_URL_BAR, D(LGUI), T(L), U(LGUI),END ); + BABLM( BABL_BROWSER_FORWARD, D(LGUI), T(RIGHT), U(LGUI),END ); + BABLM( BABL_BROWSER_BACK, D(LGUI), T(LEFT), U(LGUI),END ); + BABLM( BABL_BROWSER_FIND, D(LGUI), T(F), U(LGUI),END ); + BABLM( BABL_BROWSER_BOOKMARK, D(LGUI), T(D), U(LGUI),END ); + //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE + BABLM( BABL_BROWSER_DEV_TOOLS, D(LGUI), D(LALT), T(I), U(LALT),U(LGUI),END ); // Chrome + // Chrome + BABLM( BABL_BROWSER_RELOAD, D(LGUI), T(R), U(LGUI),END ); // add shift for reload w/o cache + BABLM( BABL_BROWSER_FULLSCREEN, D(LGUI), D(LCTL), T(P), U(LCTL), U(LGUI),END ); //command shift F + BABLM( BABL_BROWSER_ZOOM_IN, D(LGUI), D(RSFT), T(EQL), U(RSFT), U(LGUI),END ); // ctr+ + + BABLM( BABL_BROWSER_ZOOM_OUT, D(LGUI), T(MINS), U(LGUI),END ); +*/ +#endif +#endif + break; + + return MACRO_NONE; + } + +#endif + + +#ifdef VI_MODE + case VI_MODE: +// you have to track the modes yourself. Otherwise motion is awful (bell, bell, bell) + + + BABLM( BABL_GO_LEFT_1C , T(H), END ); + BABLM( BABL_GO_RIGHT_1C , T(L), END ); + BABLM( BABL_GO_LEFT_WORD , T(B),END ); + BABLM( BABL_GO_RIGHT_WORD , T(W), END ); + BABLM( BABL_GO_START_LINE , D(LSFT), T(6),U(LSFT), END ); //^ + BABLM( BABL_GO_END_LINE , D(LSFT), T(4),U(LSFT) , END ); //$ + BABLM( BABL_GO_START_DOC , T(G),T(G) ,END ); + BABLM( BABL_GO_END_DOC , D(LSFT), T(G),U(LSFT),END ); + BABLM( BABL_GO_NEXT_LINE , T(J), END ); + BABLM( BABL_GO_PREV_LINE, T(K), END ); + BABLM( BABL_PGDN ,D(LCTL), T(F), U(LCTL), END ); + BABLM( BABL_PGUP , D(LCTL), T(B), U(LCTL), END ); + BABLM( BABL_DEL_RIGHT_1C , T(X),END ); + BABLM( BABL_DEL_LEFT_WORD , T(D),T(G),T(E),END ); + BABLM( BABL_DEL_RIGHT_WORD , T(D),T(W),END ); + BABLM( BABL_DEL_TO_LINE_END, T(D),D(LSFT), T(4),U(LSFT) ,END ); // d$ + BABLM( BABL_DEL_TO_LINE_START, T(D),D(LSFT), T(6),U(LSFT) ,END ); +#ifndef BABL_MOVEMENTONLY + BABLM( BABL_UNDO , T(U), END ); + BABLM( BABL_REDO , D(LCTL), T(R), U(LCTL), END ); + BABLM( BABL_CUT , T(X), END ); + BABLM( BABL_COPY , T(Y),END ); + BABLM( BABL_PASTE , T(P), END ); + BABLM( BABL_SELECT_ALL , D(LSFT), T(SCLN),U(LSFT),D(LSFT), T(5),U(LSFT),T(Y), END ); // wrong but helpful? + BABLM( BABL_FIND , T(SLASH),END ); + BABLM( BABL_FIND_NEXT , T(N),END ); + BABLM( BABL_FIND_REPLACE , D(LALT),D(LSFT), T(5),U(LSFT), U(LALT), END ); + BABLM( BABL_RUNAPP,END ); + BABLM( BABL_SWITCH_APP_NEXT ,END ); + BABLM( BABL_SWITCH_APP_LAST ,END ); + BABLM(BABL_CLOSE_APP, D(LSFT), T(SCLN),U(LSFT), T(Q), D(RSFT), T(1),U(RSFT), END ); + BABLM(BABL_HELP, D(LSFT), T(SCLN),U(LSFT),T(H),END); // start search in help +#ifndef BABL_NOBROWSER +/* you get to figure this out + BABLM( BABL_BROWSER_NEW_TAB, D(LGUI), T(T), U(LGUI),END ); + BABLM( BABL_BROWSER_CLOSE_TAB, D(LGUI), T(W), U(LGUI),END ); + BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LGUI), D(RSFT),T(T), U(RSFT),U(LGUI),END ); + BABLM( BABL_BROWSER_NEXT_TAB, D(LGUI),D(LALT), T(RIGHT),U(LALT), U(LGUI),END ); + BABLM( BABL_BROWSER_PREV_TAB, D(LGUI), D(RSFT), T(LEFT), U(RSFT), U(LGUI),END ); + BABLM( BABL_BROWSER_URL_BAR, D(LGUI), T(L), U(LGUI),END ); + BABLM( BABL_BROWSER_FORWARD, D(LGUI), T(RIGHT), U(LGUI),END ); + BABLM( BABL_BROWSER_BACK, D(LGUI), T(LEFT), U(LGUI),END ); + BABLM( BABL_BROWSER_FIND, D(LGUI), T(F), U(LGUI),END ); + BABLM( BABL_BROWSER_BOOKMARK, D(LGUI), T(D), U(LGUI),END ); + //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE + BABLM( BABL_BROWSER_DEV_TOOLS, D(LGUI), D(LALT), T(I), U(LALT),U(LGUI),END ); // Chrome + // Chrome + BABLM( BABL_BROWSER_RELOAD, D(LGUI), T(R), U(LGUI),END ); // add shift for reload w/o cache + BABLM( BABL_BROWSER_FULLSCREEN, D(LGUI), D(LCTL), T(P), U(LCTL), U(LGUI),END ); //command shift F + BABLM( BABL_BROWSER_ZOOM_IN, D(LGUI), T(PLUS), U(LGUI),END ); + BABLM( BABL_BROWSER_ZOOM_OUT, D(LGUI), T(MINS), U(LGUI),END ); +*/ +#endif +#endif + return MACRO_NONE; +#endif + + + + +#ifdef READMUX_MODE +// Readline command line editing + tmux windowing +// I havent decided how much to do readline and how much tmux + + + case READMUX_MODE: + + BABLM( BABL_GO_LEFT_1C , T(LEFT), END ); + BABLM( BABL_GO_RIGHT_1C , T(RIGHT), END ); + BABLM( BABL_GO_LEFT_WORD , D(LALT), T(B), U(LALT), END ); + BABLM( BABL_GO_RIGHT_WORD , D(LALT), T(F), U(LALT), END ); + BABLM( BABL_GO_START_LINE , D(LCTL), T(A), U(LCTL), END ); + BABLM( BABL_GO_END_LINE , D(LCTL), T(E), U(LCTL), END ); + //BABLM( BABL_GO_START_DOC ,END );// tmux? + //BABLM( BABL_GO_END_DOC ,END ); // tmux? + BABLM( BABL_GO_NEXT_LINE , D(LCTL), T(N), U(LCTL), END ); + BABLM( BABL_GO_PREV_LINE , D(LCTL), T(P), U(LCTL), END ); + BABLM( BABL_PGDN , T(PGDN), END ); + BABLM( BABL_PGUP , T(PGUP), END ); + BABLM( BABL_DEL_RIGHT_1C , D(LCTL), T(D), U(LCTL),END ); + BABLM( BABL_DEL_LEFT_WORD , D(LCTL), T(W), U(LCTL), END ); + BABLM( BABL_DEL_RIGHT_WORD , D(LALT), T(D), U(LALT), END ); + BABLM( BABL_DEL_TO_LINE_END, D(LCTL), T(K), U(LCTL), END ); + BABLM( BABL_DEL_TO_LINE_START, D(LCTL), T(U), U(LCTL), END ); +#ifndef BABL_MOVEMENTONLY + BABLM( BABL_UNDO , D(LALT), T(R), U(LALT) , END ); + BABLM( BABL_REDO , D(LCTL), T(X), U(LCTL),T(C), END ); // arguably + BABLM( BABL_CUT , D(LCTL), T(K), U(LCTL), END ); // wrong half the time + //BABLM( BABL_COPY ,END ); + BABLM( BABL_PASTE , D(LCTL), T(Y), U(LCTL), END ); + BABLM( BABL_SELECT_ALL , D(LCTL), T(A), T(K), T(Y), U(LCTL) , END ); + BABLM( BABL_FIND , D(LCTL), T(R), U(LCTL), END ); // search history + BABLM(BABL_FIND_NEXT, D(LCTL), T(S), U(LCTL), END ); + //BABLM( BABL_FIND_REPLACE ,END ); + BABLM( BABL_RUNAPP , D(LCTL), T(B), U(LCTL), T(C),END ); //tmux + BABLM( BABL_SWITCH_APP_NEXT , D(LCTL), T(B), U(LCTL), T(N),END ); //tmux + BABLM( BABL_SWITCH_APP_LAST , D(LCTL), T(B), U(LCTL), T(P),END ); //tmux + BABLM( BABL_CLOSE_APP , D(LCTL), T(B), U(LCTL), T(D),END); // usually what I want + // BABLM( BABL_HELP ,END ); +#ifndef BABL_NOBROWSER +/* Add lynx shortcuts? + BABLM( BABL_BROWSER_NEW_TAB, D(LGUI), T(T), U(LGUI),END ); + BABLM( BABL_BROWSER_CLOSE_TAB, D(LGUI), T(W), U(LGUI),END ); + BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LGUI), D(RSFT),T(T), U(RSFT),U(LGUI),END ); + BABLM( BABL_BROWSER_NEXT_TAB, D(LGUI),D(LALT), T(RIGHT),U(LALT), U(LGUI),END ); + BABLM( BABL_BROWSER_PREV_TAB, D(LGUI), D(RSFT), T(LEFT), U(RSFT), U(LGUI),END ); + BABLM( BABL_BROWSER_URL_BAR, D(LGUI), T(L), U(LGUI),END ); + BABLM( BABL_BROWSER_FORWARD, D(LGUI), T(RIGHT), U(LGUI),END ); + BABLM( BABL_BROWSER_BACK, D(LGUI), T(LEFT), U(LGUI),END ); + BABLM( BABL_BROWSER_FIND, D(LGUI), T(F), U(LGUI),END ); + BABLM( BABL_BROWSER_BOOKMARK, D(LGUI), T(D), U(LGUI),END ); + //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE + BABLM( BABL_BROWSER_DEV_TOOLS, D(LGUI), D(LALT), T(I), U(LALT),U(LGUI),END ); // Chrome + // Chrome + BABLM( BABL_BROWSER_RELOAD, D(LGUI), T(R), U(LGUI),END ); // add shift for reload w/o cache + BABLM( BABL_BROWSER_FULLSCREEN, D(LGUI), D(LCTL), T(P), U(LCTL), U(LGUI),END ); //command shift F + BABLM( BABL_BROWSER_ZOOM_IN, D(LGUI), T(PLUS), U(LGUI),END ); + BABLM( BABL_BROWSER_ZOOM_OUT, D(LGUI), T(MINS), U(LGUI),END ); +*/ +#endif +#endif + + return MACRO_NONE; + +#endif + + default: + return MACRO_NONE; + } + +} + + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/MS-sculpt-mobile/babblePaste.h b/keyboards/handwired/MS-sculpt-mobile/babblePaste.h new file mode 100644 index 0000000000..3067c854de --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/babblePaste.h @@ -0,0 +1,238 @@ +/* A library to output the right key shortcut in any common app. +Given a global variable babble_mode to show the environment and a +key that calls the paste macro, do the right type of paste. + +Setting the bable_mode is done by another macro, or TBD interaction with the host. + +Huge thanks to https://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts +and jeebak & algernon's keymap +*/ +#ifndef _babblePaste_h_included__ +#define _babblePaste_h_included__ +#include "action_layer.h" +#include "quantum_keycodes.h" +#include "config.h" + +#ifdef USE_BABLPASTE + +/* *************************** + +// Uncomment any modes you want. Whatever mode = 0 will be the default on boot +// Expect to get errors if you comment a feature out and leave it in your keymap. + +#define USE_BABLPASTE + +//#define MS_MODE 0 // Windows. +//#define MAC_MODE 1 +//#define LINUX_MODE 2 //aka gnome+KDE +//#define EMACS_MODE 3 +//#define VI_MODE 4 +//#define WORDSTAR_MODE 5 +//#define READMUX 6 // Readline and tmux + +// This removes everything but cursor movement +//#define BABL_MOVEMENTONLY +// and this just removes browser shortcuts +//#define BABL_NOBROWSER +****************************/ + + +// Uncomment if you need more free flash space +// It removes everything but cursor movement +//#define BABL_MOVEMENTONLY + + +// Define starting number for BABL macros in the macro range. +// Probably can start the default even lower +#define BABL_START_NUM 50 + +/* Macros handled by babblepaste. Most should be available for all platforms. +Whatever isn't defined will NOP */ +enum { +// Movement macros + // left & right + BABL_GO_LEFT_1C= BABL_START_NUM, + BABL_GO_RIGHT_1C, + BABL_GO_LEFT_WORD, + BABL_GO_RIGHT_WORD, + BABL_GO_START_LINE, + BABL_GO_END_LINE, + // now up & down + BABL_GO_START_DOC, + BABL_GO_END_DOC, + BABL_GO_NEXT_LINE, + BABL_GO_PREV_LINE, + BABL_PGDN, + BABL_PGUP, + // And the delete options + //BABL_DEL_LEFT_1C == backspace, so why bother. + BABL_DEL_RIGHT_1C, // usually = Del + BABL_DEL_LEFT_WORD, + BABL_DEL_RIGHT_WORD, + BABL_DEL_TO_LINE_END, // delete from cursor to end of line + BABL_DEL_TO_LINE_START, // delete from cursor to begining line +#ifndef BABL_MOVEMENTONLY + // Cut & Paste + BABL_UNDO, + BABL_REDO, + BABL_CUT, + BABL_COPY, + BABL_PASTE, + BABL_SELECT_ALL, + /* not yet implemented + BABL_SWAP_LAST2C // swap last characters before the cursor + BABL_SWAP_LAST2W // Swap the last two words before the cursor + */ + // find & replace + BABL_FIND, + BABL_FIND_NEXT, + BABL_FIND_REPLACE, + // GUI or app + BABL_RUNAPP, + BABL_SWITCH_APP_NEXT, + BABL_SWITCH_APP_LAST, // previous + BABL_CLOSE_APP, + BABL_HELP, + +#ifndef BABL_NOBROWSER + BABL_BROWSER_NEW_TAB, + BABL_BROWSER_CLOSE_TAB, + BABL_BROWSER_REOPEN_LAST_TAB, + BABL_BROWSER_NEXT_TAB, + BABL_BROWSER_PREV_TAB, + BABL_BROWSER_URL_BAR, + BABL_BROWSER_FORWARD, + BABL_BROWSER_BACK, + BABL_BROWSER_FIND, + BABL_BROWSER_BOOKMARK, + BABL_BROWSER_DEV_TOOLS, // hard one to remember + BABL_BROWSER_RELOAD, + BABL_BROWSER_FULLSCREEN, + BABL_BROWSER_ZOOM_IN, + BABL_BROWSER_ZOOM_OUT, + +#endif + +#endif +// Macros for mode switching +#ifdef MS_MODE + BABL_WINDOWS, +#endif +#ifdef MAC_MODE + BABL_MAC, +#endif +#ifdef LINUX_MODE + BABL_LINUX, +#endif +#ifdef EMACS_MODE + BABL_EMACS, +#endif +#ifdef VI_MODE + BABL_VI, +#endif +#ifdef READMUX_MODE + BABL_READLINE, +#endif + + +}; + +// BUG, used to jump to babble functiion. Surely there is a way to calculate size of enum? +#define BABL_NUM_MACROS 48+4 // 48 + # of defined modes. + +/* And all the shorthand keymap ready versions */ +// First the mode switching macros +#ifdef MS_MODE +#define B_WIN M(BABL_WINDOWS) +#endif +#ifdef MAC_MODE +#define B_MAC M(BABL_MAC) +#endif +#ifdef LINUX_MODE +#define B_LNX M(BABL_LINUX) +#endif +#ifdef EMACS_MODE +#define B_EMAX M(BABL_EMACS) +#endif +#ifdef VI_MODE +#define B_VI M(BABL_VI) +#endif +#ifdef READMUX_MODE +#define B_READ M(BABL_READLINE) +#endif + +// and all the movement & action. + +#define B_L1C M(BABL_GO_LEFT_1C) +#define B_R1C M(BABL_GO_RIGHT_1C) +#define B_L1W M(BABL_GO_LEFT_WORD) +#define B_R1W M(BABL_GO_RIGHT_WORD) +#define B_GSOL M(BABL_GO_START_LINE) +#define B_GEOL M(BABL_GO_END_LINE) +#define B_GTOP M(BABL_GO_START_DOC) +#define B_GEND M(BABL_GO_END_DOC) +#define B_DOWN M(BABL_GO_NEXT_LINE) +#define B_UP M(BABL_GO_PREV_LINE) +#define B_PGDN M(BABL_PGDN) +#define B_PGUP M(BABL_PGUP) +//#define B_BKSP M(BABL_DEL_LEFT_1C) == backspace so why bother. +#define B_DEL M(BABL_DEL_RIGHT_1C) // usually = Del +#define B_DLW M(BABL_DEL_LEFT_WORD) +#define B_DRW M(BABL_DEL_RIGHT_WORD) +#define B_DEOL M(BABL_DEL_TO_LINE_END) // delete from cursor to end of line +#define B_DSOL M(BABL_DEL_TO_LINE_START) // delete from cursor to begining line +#define B_UNDO M(BABL_UNDO) +#define B_REDO M(BABL_REDO) +#define B_CUT M(BABL_CUT) +#define B_COPY M(BABL_COPY) +#define B_PAST M(BABL_PASTE) +#define B_SELA M(BABL_SELECT_ALL) +#define B_FIND M(BABL_FIND) +#define B_FINDN M(BABL_FIND_NEXT) +#define B_FINDR M(BABL_FIND_REPLACE) +#define B_RAPP M(BABL_RUNAPP) +#define B_NAPP M(BABL_SWITCH_APP_NEXT) +#define B_PAPP M(BABL_SWITCH_APP_LAST) // previous +#define B_CAPP M(BABL_CLOSE_APP) +#define B_HELP M(BABL_HELP) +#define B_NTAB M(BABL_BROWSER_NEW_TAB) +#define B_CTAB M(BABL_BROWSER_CLOSE_TAB) +#define B_ROTB M(BABL_BROWSER_REOPEN_LAST_TAB) +#define B_NXTB M(BABL_BROWSER_NEXT_TAB) +#define B_PTAB M(BABL_BROWSER_PREV_TAB) +#define B_NURL M(BABL_BROWSER_URL_BAR) +#define B_BFWD M(BABL_BROWSER_FORWARD) +#define B_BBAK M(BABL_BROWSER_BACK) +#define B_BFND M(BABL_BROWSER_FIND) +#define B_BOOK M(BABL_BROWSER_BOOKMARK) +#define B_BDEV M(BABL_BROWSER_DEV_TOOLS) // hard one to remember +#define B_BRLD M(BABL_BROWSER_RELOAD) +#define B_BFUlL M(BABL_BROWSER_FULLSCREEN) +#define B_ZMIN M(BABL_BROWSER_ZOOM_IN) +#define B_ZMOT M(BABL_BROWSER_ZOOM_OUT) + + + + + + + +/* from action_macro.h +typedef uint8_t macro_t; + +#define MACRO_NONE (macro_t*)0 +#define MACRO(...) ({ static const macro_t __m[] PROGMEM = { __VA_ARGS__ }; &__m[0]; }) +#define MACRO_GET(p) pgm_read_byte(p) + +#define BABL_MSTART (entry, os, macro...) ( const macro_t bablDict[entry][os] PROGMEM = { macro... }; ) + +*/ + +const macro_t *babblePaste(keyrecord_t *record, uint8_t shortcut); + +macro_t* switch_babble_mode( uint8_t id); + + +#endif +#endif + diff --git a/keyboards/handwired/MS-sculpt-mobile/babblePaste.txt b/keyboards/handwired/MS-sculpt-mobile/babblePaste.txt new file mode 100644 index 0000000000..cf75e153e8 --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/babblePaste.txt @@ -0,0 +1,123 @@ + BabblePaste is a library of common macros used to make sure that +you can have one "paste" button on one layer, and it will do the +right thing on any OS or app. Windows=Ctrl-V. Mac = Command-V and so on. + +The babblepaste library looks for the current status in a babble_mode global variable. +To switch modes, run the switch_babble_mode() function, or a pre defined macro. +Currently supported are Windows, OS X, Gnome/kde, Emacs, VI and readline, +across 42+ common macro actions. + + +###To use the library +1) Paste the following into your config.h. + +//////Begin////// +#define USE_BABLPASTE 1 + +#ifdef USE_BABLPASTE +/* define BabblePaste maps. Whatever = 0 will be the default. */ +// MAC_MODE 0 +// MS_MODE 1 +// LINUX_MODE 2 +// EMACS_MODE 3 +// VI_MODE 3 +// Readline and tmux +// READMUX_MODE 2 +// WORDSTAR_MODE 5 +#endif + +// Uncomment these to remove options an free up flash space + +// This removes everything but cursor movement +// BABL_MOVEMENTONLY +// and this just removes browser shortcuts +// BABL_NOBROWSER +///////End/////// + +2) Add the following to your keymap in the action_get_macro + +//////Begin////// +#ifdef USE_BABLPASTE + + if( id >= BABL_START_NUM && id < (BABL_START_NUM + BABL_NUM_MACROS ) ) { + if (record->event.pressed) { // is there a case where this isn't desired? + + babblePaste ( record, id ); + return MACRO_NONE; + } + } +#endif +///////End/////// + +3) add Babbelpaste actions to your keymap. See the full list in babblePaste.h, or the +list below +B_L1C // go left 1 char +B_R1C // go Right 1 char + B_L1W //GO_LEFT_1 WORD + B_R1W //BABL_GO_RIGHT_1 WORD + B_GSOL // BABL_GOTO_START of _LINE + B_GEOL // BABL_GOTO_END_LINE + B_GTOP //BABL_GOTO_START_DOC + B_GEND //BABL_GO_END_DOC + B_DOWN //BABL_GO_NEXT_LINE + B_UP // BABL_GO_PREV_LINE + B_PGDN //PGDN + B_PGUP //PGUP +// B_BKSP //backspace so why bother. + B_DEL // DEL_RIGHT_1 Char // usually = Del + B_DLW // DEL_LEFT_ 1 WORD) + B_DRW //DEL_RIGHT_1 WORD + B_DEOL // delete from cursor to end of line + B_DSOL // delete from cursor to begining line + B_UNDO //UNDO + B_REDO // REDO + B_CUT // CUT) + B_COPY // COPY) + B_PAST // PASTE) + B_SELA // SELECT_ALL + B_FIND // FIND) + B_FINDN //FIND_NEXT) + B_FINDR // FIND_REPLACE) + B_RAPP // open application launcher + B_NAPP // switch to next app + B_PAPP // switch to previous app + B_CAPP // CLOSE_APP) + B_HELP // HELP) + B_NTAB // BROWSER_NEW_TAB) + B_CTAB //BROWSER_CLOSE_TAB) + B_ROTB //BROWSER_REOPEN_LAST_TAB) + B_NXTB //BROWSER_NEXT_TAB) + B_PTAB //BROWSER_PREV_TAB) + B_NURL //BROWSER_jump to URL_BAR) + B_BFWD // BROWSER_FORWARD (in history) + B_BBAK //BROWSER_BACK (in history) + B_BFND // BROWSER_FIND) + B_BOOK //BROWSER_New BOOKMARK) + B_BDEV //BROWSER_ Open DEV_TOOLS) // hard one to remember + B_BRLD // BROWSER_RELOAD Page + B_BFUlL // BROWSER_FULLSCREEN) + B_ZMIN // BROWSER_ZOOM_IN) + B_ZMOT //BROWSER_ZOOM_OUT) + + +#### Development notes +-Why a new function? Because it would make the keymap too ugly to put it there. +-Why not return the macro to action_get_macro? Because I kept running into scope problems +and pointers to the wrong type. +-Why not an array of arrays as a lookup instead of a function? That would allow you +to store the lookup table in PROGMEM. True, but that takes more pre-processor skill +than I had. + +-Have you tested this on every platform? No. Submit a patch. + + +### Next steps for someone. +Make it easier to pair macros with modifiers. So key foo will jump to start of line, and +Shift(foo) will jump to the first tab in a browser. + +## Thanks + +Thanks to https://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts +and https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/jeebak/keymap.c +And of course QMK... + diff --git a/keyboards/handwired/MS-sculpt-mobile/config.h b/keyboards/handwired/MS-sculpt-mobile/config.h new file mode 100644 index 0000000000..f89514278d --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/config.h @@ -0,0 +1,100 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Microsoftplus +#define DESCRIPTION 6000 + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 18 + +#ifdef ASTAR +#define PRODUCT sculpt mobile astar + /*0 1 2 3 4 5 6 7 8 */ +#define MATRIX_ROW_PINS {D7, C6, D4, D0, D1, D3, D2, E2} +/* A B C D E F G H I J K L M N O P Q R */ +#define MATRIX_COL_PINS {B4, B5, E6, B7, B6, D6, C7, F7, F6, F4,F5, F1,F0, D5, B0, B1, B2, B3} + +#else +#define PRODUCT sculpt mobile teensypp +/* 0 1 2 3 4 5 6 7 */ +#define MATRIX_ROW_PINS { F7,F6,F4,F5,F3,F2,F1,F0} +/* A B C D E F G H I J K L M N O P Q R */ +#define MATRIX_COL_PINS { B7, D0, D1, D2, D3, D4, D5, D6, D7, E0,E1,C1, C0, C3, C2, C5, C4,C7} +#define UNUSED_PINS { B6,B5,B4,B3,B2,B1,B0 } + + +#endif + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#define PREVENT_STUCK_MODIFIERS + +#endif diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/default/Makefile b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/Makefile new file mode 100644 index 0000000000..8b829218b2 --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../../Makefile +endif diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/default/config.h b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/config.h new file mode 100644 index 0000000000..8893d122e0 --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/default/keymap.c b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/keymap.c new file mode 100644 index 0000000000..ab09dcdd1c --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/keymap.c @@ -0,0 +1,64 @@ +#include "MS-sculpt-mobile.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* +* +* |ESC | F1 | F2 | F3 | F4 | F5 | F6 | f7 | F8 | F9 | F10| F11| F12|Vol-|Vol+|Mute| +* -------------------------------------------------------------------------------' +* | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Bakspace| Del | +* -------------------------------------------------------------------------- +* | tab | q | w | e | r | t | y | u | i | o | p | [ | ] | \ | | +* -------------------------------------------------------------------------------' +* | caps | a | s | d | f | g | h | j | k | l | ; | ' | enter |PgUp| +* -------------------------------------------------------------------------------- +* |Lsft | z | x | c | v | b | n | m | , | . | / | Rsft| Up| PgDn| +* --------------------------------------------------------------------------------- +* |Lctl |Lgui |Lalt | Space |Ralt | FN | Rctl |Left|Down|Rght| +* --------------------------------------------------------------------------------- +*/ + +[0] = KEYMAP( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, KC_VOLU, KC_MUTE,\ + KC_GRAVE, KC_1, KC_2, KC_3 ,KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQL, KC_BSPC, KC_DEL,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,\ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,\ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,\ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, RSFT(KC_1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +) + +}; +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/default/readme.md b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/readme.md new file mode 100644 index 0000000000..e67ddc6fec --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for microsoft-sculpt-mobile diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/Makefile b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/Makefile new file mode 100644 index 0000000000..1209ad7814 --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../../Makefile +endif diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/config.h b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/config.h new file mode 100644 index 0000000000..8cf4202cda --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/config.h @@ -0,0 +1,32 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define USE_BABLPASTE + +// Expect to get errors if you comment a feature out and leave it in your keymap. + +#ifdef USE_BABLPASTE +//define BabblePaste maps +// Windows. +#define MAC_MODE 0 +#define MS_MODE 1 +//aka gnome+KDE +//#define LINUX_MODE 2 +//#define EMACS_MODE 3 +#define VI_MODE 3 +// Readline and tmux +#define READMUX_MODE 2 +//#define WORDSTAR_MODE 5 +#endif + +// Uncomment if you need more free flash space + +// This removes everything but cursor movement +//#define BABL_MOVEMENTONLY +// and this just removes browser shortcuts +//#define BABL_NOBROWSER + +// place overrides here +#endif diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/keymap.c b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/keymap.c new file mode 100644 index 0000000000..395a9fb470 --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/keymap.c @@ -0,0 +1,272 @@ +#include "MS-sculpt-mobile.h" +#include "action_layer.h" +#include "action_util.h" +#include "babblePaste.h" + +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +#define _QWR 0 +#define _CDH 2 +#define _SYM 3 +#define _MOV 4 +#define _TRAN 5 + + +enum layer_keycodes { +QWR, +CDH, +SYM, +MOV, +NUM, +TRAN +}; + + +// Shorter spacing +#define XXXX KC_NO +#define ____ KC_TRNS + +// Custom macros + +/* Fn Keys */ +#define TT_SYM MO(_SYM) +#define TT_MOV KC_FN2 +#define TT_NUM MO(_NUM) +#define SSFT ACTION_MODS_ONESHOT(MOD_LSFT) + +enum macro_keycodes { +DHPASTE=1, +VIBRK, +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* QWERTY +* +* |ESC | F1 | F2 | F3 | F4 | F5 | F6 | f7 | F8 | F9 | F10| F11| F12|Vol-|Vol+|_CDH| +* -------------------------------------------------------------------------------' +* | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Bakspace| Del| +* --------------------------------------------------------------------------- +* | tab | q | w | e | r | t | y | u | i | o | p | [ | ] | \ | | +* -------------------------------------------------------------------------------' +* |Bak/Mov| a | s | d | f | g | h | j | k | l | ; | ' | enter |PgUp| +* -------------------------------------------------------------------------------- +* |Lsft | z | x | c | v | b | n | m | , | . | / | Rsft| Up| PgDn| +* --------------------------------------------------------------------------------- +* |Lctl |Lgui |Lalt | Space/Sym | GUI | Sym | Rctl |Left|Down|Rght| +* --------------------------------------------------------------------------------- +*/ + +[_QWR] = KEYMAP( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, KC_VOLU, CDH,\ + KC_ESC, KC_1, KC_2, KC_3 ,KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQL, KC_BSPC, KC_DEL,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,\ + TT_MOV, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,\ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT,KC_SLSH,KC_RSFT, KC_UP, KC_PGDN,\ + KC_LCTL, KC_LGUI, KC_LALT, KC_FN1, KC_RGUI,TT_SYM,KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +), + +[_CDH] = KEYMAP (\ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, QWR, \ + KC_ESC, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, ____, ____, ____,\ + TT_MOV, KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, KC_2,\ + KC_LSFT, KC_Z, KC_X, KC_C, M(DHPASTE), KC_V, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, ____, KC_1,\ + ____, ____, ____ , KC_FN1, ____, ____, ____, ____, ____, ____ + +), + + +/* SYM +* +* |ESC | F1 | F2 | F3 | F4 | F5 | F6 | f7 | F8 | F9 | F10| F11| F12|Vol-|Vol+|_CDH| +* -------------------------------------------------------------------------------' +* | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Bakspace|Del | +* -------------------------------------------------------------------------- +* | ESC: | ^ | { | } | @ | % | | [ | ( | ) | _ | [ | ] | \ | | +* -------------------------------------------------------------------------------' +* |Bak/Mov| ! | # | 0 | = | { | } | - | 1 | + | ] | ` | enter |PgUp| +* -------------------------------------------------------------------------------- +* |Lsft | ; | ~ | : | ~ | "|"| $ | * | | . | / | Rsft| Up| PgDn| +* --------------------------------------------------------------------------------- +* |Lctl |Lgui |Lalt | Space/Sym | GUI | Sym | Rctl |Left|Down|Rght| +* --------------------------------------------------------------------------------- +*/ + +[_SYM] = KEYMAP (\ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + M(VIBRK), KC_CIRC, KC_LCBR, KC_RCBR,KC_AT, KC_PERC, ____, KC_LBRC,KC_LPRN,KC_RPRN,KC_UNDS, ____, ____, ____,\ + ____, KC_EXLM, KC_HASH, KC_0, KC_EQL, KC_LCBR, KC_RCBR,KC_MINS,KC_1, KC_PLUS,KC_RBRC, KC_GRV, ____, ____,\ + ____, KC_SCLN, KC_TILDE, KC_COLN, KC_TILDE, KC_PIPE, KC_DLR, KC_ASTR, ____, KC_DOT , KC_SLSH, ____, ____, ____,\ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____ +), +/* +* |ESC | MAC| Win|RdLn| VI | | | | | | | | | | | | +* -------------------------------------------------------------------------------' +* | | | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Bakspace| Del| +* --------------------------------------------------------------------------- +* | tab | | |Find| |pTab |DSOL|DelW| Up |DelW|DEOL| [ | ] | \ | | +* -------------------------------------------------------------------------------' +* |Bak/Mov| | | | |nTab |GSOL| <- | Dwn | -> | EOL | ' | enter |PgUp| +* -------------------------------------------------------------------------------- +* |Lsft |Undo| Cut|Copy|Pste| | | | | | / | Rsft| Up| PgDn| +* --------------------------------------------------------------------------------- +* |Lctl |Lgui |Lalt | Space/Sym | GUI | Sym | Rctl |Left|Down|Rght| +* --------------------------------------------------------------------------------- +*/ + +[_MOV] = KEYMAP (\ + ____, B_MAC,B_WIN,B_READ, B_VI, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, B_PAPP, B_NAPP, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, B_UNDO, ____, B_BFND, ____, B_PTAB, B_DSOL, B_DLW, B_UP, B_DRW, B_DEOL, ____, ____, ____, \ + ____, B_SELA, B_BRLD, ____, ____, B_NXTB, B_GSOL, B_L1C, B_DOWN, B_R1C,B_GEOL, ____, ____, ____,\ + ____, B_UNDO,B_CUT, B_COPY, B_PAST, B_PAST, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____ +), + +[_TRAN] = KEYMAP (\ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____ +) +}; + +const uint16_t PROGMEM fn_actions[] = { +[1] = ACTION_LAYER_TAP_KEY(_SYM,KC_SPACE), +[2] = ACTION_LAYER_TAP_KEY(_MOV,KC_BSPC) +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWR: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + layer_off(_CDH); + } + return false; + break; + + case CDH: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + layer_on(_CDH); + } + return false; + break; + + case SYM: + if (record->event.pressed) { + layer_on(_SYM); + } else { + layer_off(_SYM); + } + return false; + break; + + } + return true; + +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + +/* If id is in the range of BABL macros, call the babl function */ +/* Any clever remapping with modifiers should happen here e.g. shift bablkey does opposite*/ +#ifdef USE_BABLPASTE + + if( id >= BABL_START_NUM && id < (BABL_START_NUM + BABL_NUM_MACROS ) ) { + if (record->event.pressed) { // is there a case where this isn't desired? + + babblePaste ( record, id ); + return MACRO_NONE; + } + } +#endif + + + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + + /* Colemak mod-dh moves the D key to the qwerty V position + This hack makes apple-V_position do what I mean */ + case DHPASTE: + if(keyboard_report->mods & MOD_BIT(KC_LGUI) ) { + if (record->event.pressed) { + clear_keyboard_but_mods(); + register_code(KC_V); + } else { + unregister_code(KC_V); + } + } else { + if (record->event.pressed) { + register_code(KC_D); + } else { + unregister_code(KC_D); + } + } + break; + + case VIBRK: // vi esc: + if (record->event.pressed) { + return MACRO( T(ESC),D(LSFT),T(SCLN),U(LSFT), END ); + } + break; + + + + + default: + return MACRO_NONE; + } + + +return MACRO_NONE; +}; + + + + + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { + +} + + +void led_set_user(uint8_t usb_led) { + +} + + + + + + diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/readme.md b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/readme.md new file mode 100644 index 0000000000..96ee0e77a5 --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/readme.md @@ -0,0 +1 @@ +# A more programmer oriented keymap for microsoft-sculpt-mobile diff --git a/keyboards/handwired/MS-sculpt-mobile/readme.md b/keyboards/handwired/MS-sculpt-mobile/readme.md new file mode 100644 index 0000000000..d435b449fb --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/readme.md @@ -0,0 +1,58 @@ + +This is a way to take a Microsoft ergonomic bluetooth keyboard, and make it +into a hard-wired keyboard running QMK. + +The keyboard is known under several different names: +Mobile Bluetooth 5000, Mobile 6000, Sculpt mobile, and Asus rebranded + +I had a stack of them,since they're cheap on ebay, travel well, and are just ergo enough. + +The ribbon cable is 1mm pitch, which is hard to hand solder. I bought a cheap set of +"pitch adapter" boards https://www.amazon.com/Double-Sided-0-4mm-1-0-Adapter-60mmx38mm/dp/B00OK42118 + +Cut the original ribbon cable sockets off the bluetooth board using a razor, they're hard to desolder. +They're also allow the cable to be inserted on top or bottom. + +If I was going to do it again, I'd make the MCU connection come out the top of the keyboard +and avoid the wires dangling out the bottom. + +As I was debugging the matrix, I started to get random failures. In desparation I tried a second MCU, +but had the same problems. It turns out that the ribbon cable connections can get worn. Shave a +half millimeter off the end of the ribbon cable & the errors go away. + +My method for discovering the matrix was to set up a KEYMAP macro that included all pins. +See MATRIX_TESTING_KEYMAP if you need it. Then set up a keymap that has all printable symbols +in the first 4 rows. test each key & record output. Then switch the printable symbols to the +bottom 4 rows & repeat. This was enough to show the matrix. + + +The full original keymap for the sculpt is + A B C D E F G H ---> +0 b n m , . / +1 g h " +2 7 8 9 0 Del PgUp +3 p [ ] \ +4 y u i o +5 ~ - += j k l ; 5 +6 a s d q w e, Up left +7 F7 F8 F9 F10 F11 F12 f + +-----> I J K L M N O P Q R +0 Caps FN +1 Vol+ mute Rctl vol- pgdn LCTL +2 Rshift LShift +3 Ralt LAlt +4 LGUI +5 6 bakspc 1 2 3 4 F4 F5 F6 +6 Down right spc F1 F2 F3 tab +7 r t z x c v enter Esc + +This works with 18 cols + 8 rows on a Teensy++, or Arm based Teensy. + +The Astar mini has all pins exposed , so you can do 18x8 +If you want a speaker, LEDs &etc, you'll need to free up a pin. I recommend joining columns +R and L to the same pin. + +Building - add ASTAR=1 to the compile line or leave out for teensy2++ + + diff --git a/keyboards/handwired/MS-sculpt-mobile/rules.mk b/keyboards/handwired/MS-sculpt-mobile/rules.mk new file mode 100644 index 0000000000..680389c846 --- /dev/null +++ b/keyboards/handwired/MS-sculpt-mobile/rules.mk @@ -0,0 +1,48 @@ + +## Project specific files +SRC= babblePaste.c + + +ifdef ASTAR + CFLAGS=-D ASTAR + OPT_DEFS += -DBOOTLOADER_SIZE=4096 + MCU = atmega32u4 + OPT_DEFS += -DCATERINA_BOOTLOADER + SCULPT_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done ; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) + +else + MCU = at90usb1286 + OPT_DEFS += -DBOOTLOADER_SIZE=2048 + SCULPT_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex +endif + +F_CPU = 16000000 +ARCH = AVR8 +F_USB = $(F_CPU) +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + + +USB ?= /dev/cu.usbmodem14141 + + + +upload: build + $(SCULPT_UPLOAD_COMMAND) diff --git a/keyboards/handwired/atreus50/Makefile b/keyboards/handwired/atreus50/Makefile new file mode 100644 index 0000000000..57b2ef62e5 --- /dev/null +++ b/keyboards/handwired/atreus50/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/handwired/atreus50/atreus50.c b/keyboards/handwired/atreus50/atreus50.c new file mode 100644 index 0000000000..225a51bcce --- /dev/null +++ b/keyboards/handwired/atreus50/atreus50.c @@ -0,0 +1,10 @@ +#include "atreus50.h" + +void matrix_init_kb(void) { + + // Turn status LED on + //DDRE |= (1<<6); + PORTE |= (1<<6); + + matrix_init_user(); +}; diff --git a/keyboards/handwired/atreus50/atreus50.h b/keyboards/handwired/atreus50/atreus50.h new file mode 100644 index 0000000000..de06f255e8 --- /dev/null +++ b/keyboards/handwired/atreus50/atreus50.h @@ -0,0 +1,36 @@ +#ifndef ATREUS50_H +#define ATREUS50_H + +#include "quantum.h" + +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, km0, km1, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, KC_NO, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, KC_NO, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, km0, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, km1, k36, k37, k38, k39, k3a, k3b } \ +} + +#define COMPACT_KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, km0, km1, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_NO, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b }, \ + { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_NO, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b }, \ + { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##km0, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b }, \ + { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##km1, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b } \ +} + +#define KC_ KC_TRNS + +#endif diff --git a/keyboards/handwired/atreus50/config.h b/keyboards/handwired/atreus50/config.h new file mode 100644 index 0000000000..2e34e0f898 --- /dev/null +++ b/keyboards/handwired/atreus50/config.h @@ -0,0 +1,163 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xBB80 +#define PRODUCT_ID 0x040D +#define DEVICE_VER 0x0001 +#define MANUFACTURER Hexwire +#define PRODUCT Atreus 50 Keyboard +#define DESCRIPTION Atreus layout with extra column + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { D3, D2, D1, D0 } +#define MATRIX_COL_PINS { D4, D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + + +/* ws2812 RGB LED */ +#define RGB_DI_PIN C6 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/atreus50/keymaps/default/Makefile b/keyboards/handwired/atreus50/keymaps/default/Makefile new file mode 100644 index 0000000000..d7b0fa7fd8 --- /dev/null +++ b/keyboards/handwired/atreus50/keymaps/default/Makefile @@ -0,0 +1,6 @@ +RGBLIGHT_ENABLE = yes +AUDIO_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/atreus50/keymaps/default/keymap.c b/keyboards/handwired/atreus50/keymaps/default/keymap.c new file mode 100644 index 0000000000..415405ec23 --- /dev/null +++ b/keyboards/handwired/atreus50/keymaps/default/keymap.c @@ -0,0 +1,250 @@ +#include "atreus50.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _MOVEMENT 5 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + MOVEMENT, + BACKLIT +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define KC_X0 MT(MOD_LCTL, KC_ESC) // Hold for Left Ctrl, Tap for ESC +#define KC_X1 LOWER +#define KC_X2 RAISE +#define KC_X3 MO(_MOVEMENT) +#define KC_X4 MT(MOD_LSFT, KC_ENT) // Hold for Left Shift, Tap for Enter + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 , + //|----+----+----+----+----+----|----+----|----+----+----+----+----+----| + GRV ,LCTL,LALT,LGUI, X1 ,SPC , X3 ,RSFT,BSPC, X2 ,LEFT,DOWN, UP ,RGHT + //`----+----+----+----+----+----+----+----+----+----+----+----+----+----' + ), + + [_COLEMAK] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + X0 , A , R , S , T , D , H , N , E , I , O ,QUOT, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 , + //|----+----+----+----+----+----|----+----|----+----+----+----+----+----| + GRV ,LCTL,LALT,LGUI, X1 ,SPC , X3 ,RSFT,BSPC, X2 ,LEFT,DOWN, UP ,RGHT + //`----+----+----+----+----+----+----+----+----+----+----+----+----+----' + ), + + [_DVORAK] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + X0 , A , O , E , U , I , D , H , R , N , S ,SLSH, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 , + //|----+----+----+----+----+----|----+----|----+----+----+----+----+----| + GRV ,LCTL,LALT,LGUI, X1 ,SPC , X3 ,RSFT,BSPC, X2 ,LEFT,DOWN, UP ,RGHT + //`----+----+----+----+----+----+----+----+----+----+----+----+----+----' + ), + + [_LOWER] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + TILD,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN,DEL , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + DEL , F1 , F2 , F3 , F4 , F5 , F6 ,UNDS,PLUS,LCBR,RCBR,PIPE, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , F7 , F8 , F9 ,F10 ,F11 , F12 ,END , , , , , + //|----+----+----+----+----+----|----+----|----+----+----+----+----+----| + , , , , , , , , , ,MNXT,VOLD,VOLU,MPLY + //`----+----+----+----+----+----+----+----+----+----+----+----+----+----' + ), + + [_RAISE] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + GRV , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,DEL , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + DEL , F1 , F2 , F3 , F4 , F5 , F6 ,MINS,EQL ,LBRC,RBRC,BSLS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , F7 , F8 , F9 ,F10 ,F11 , F12 ,NUHS,NUBS, , , , + //|----+----+----+----+----+----|----+----|----+----+----+----+----+----| + , , , , , , , , , ,MNXT,VOLD,VOLU,MPLY + //`----+----+----+----+----+----+----+----+----+----+----+----+----+----' + ), + + [_MOVEMENT] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + TILD,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR, UP ,LPRN,RPRN,DEL , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + DEL , F1 , F2 , F3 , F4 , F5 , F6 ,LEFT,DOWN,RGHT,RCBR,PIPE, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , F7 , F8 , F9 ,F10 ,F11 , F12 ,END , , , , , + //|----+----+----+----+----+----|----+----|----+----+----+----+----+----| + , , , , , , , ,PGDN,PGUP,MNXT,VOLD,VOLU,MPLY + //`----+----+----+----+----+----+----+----+----+----+----+----+----+----' + ), + +/* Adjust (Lower + Raise) + * |------+------+------+------+------+------. ,------+------+------+------+------+------| + * | | Reset| | | | | | | | | | | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | |Audoff|Aud on|AGnorm| |AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | |Voice-|Voice+|Musoff|Mus on| | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * `-------------------------------------------------------------------------------------------------' + */ + [_ADJUST] = KEYMAP( \ + _______, RESET, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ) + +}; + +#ifdef AUDIO_ENABLE +float tone_startup[][2] = { + {NOTE_B5, 20}, + {NOTE_B6, 8}, + {NOTE_DS6, 20}, + {NOTE_B6, 8} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); + +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +}; + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/handwired/atreus50/readme.md b/keyboards/handwired/atreus50/readme.md new file mode 100644 index 0000000000..0c24f67db2 --- /dev/null +++ b/keyboards/handwired/atreus50/readme.md @@ -0,0 +1,16 @@ +Handwired Atreus50 +================== + +This firmware is for a Handwired Atreus50 using an Arduino Pro Micro. + +## Pinout + +The following pins are used: +- Columns 1-13: D4, D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 +- Rows 1-4: D3, D2, D1, D0 + +## Compiling and loading the firmware + +To build the firmware, run `make`. + +To flash the firemware onto the microcontroller, run `make avrdude`, and press the reset button. diff --git a/keyboards/handwired/atreus50/rules.mk b/keyboards/handwired/atreus50/rules.mk new file mode 100644 index 0000000000..7770ea2a27 --- /dev/null +++ b/keyboards/handwired/atreus50/rules.mk @@ -0,0 +1,81 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro now"; \ + while [[ -z $$USB ]]; do \ + sleep 1; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ + done; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude diff --git a/keyboards/handwired/magicforce68/Makefile b/keyboards/handwired/magicforce68/Makefile new file mode 100644 index 0000000000..191c6bb664 --- /dev/null +++ b/keyboards/handwired/magicforce68/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/magicforce68/README.md b/keyboards/handwired/magicforce68/README.md new file mode 100644 index 0000000000..4f0ccecf99 --- /dev/null +++ b/keyboards/handwired/magicforce68/README.md @@ -0,0 +1,20 @@ +Magicforce 68 Handwired +======================= + +This firmware is for a Magicforce 68 that's had its PCB removed and is handwired with an Arduino Micro. NOTE: The Arduino Micro is different than the Arduino *Pro* Micro. + +## Wiring Layout + + + +## Pinout + +The following pins are used: +- Columns 1-15: B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6 +- Rows 1-5: F0, F1, F4, F5, F6 + +## Compiling and loading the firmware + +To build the firmware, run `make`. + +To flash the firemware onto the microcontroller, run `make avrdude`, and press the reset button. diff --git a/keyboards/handwired/magicforce68/config.h b/keyboards/handwired/magicforce68/config.h new file mode 100644 index 0000000000..1e2b7d3e73 --- /dev/null +++ b/keyboards/handwired/magicforce68/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Hexwire +#define PRODUCT Magicforce 68 +#define DESCRIPTION Handwired Magicforce 68 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 } +#define MATRIX_COL_PINS { B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/magicforce68/keymaps/default/keymap.c b/keyboards/handwired/magicforce68/keymaps/default/keymap.c new file mode 100644 index 0000000000..22553f714c --- /dev/null +++ b/keyboards/handwired/magicforce68/keymaps/default/keymap.c @@ -0,0 +1,67 @@ +#include "magicforce68.h" + +#define _QWERTY 0 +#define _FN1 1 +#define _FN2 2 +#define KC_ KC_TRNS +#define KC_X0 LT(_FN2, KC_GRV) +#define KC_X1 MO(_FN1) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = KEYMAP( + /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */ + ESC , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,EQL , BSPC , INS ,PGUP, + /*|----`----`----`----`----`----`----`----`----`----`----`----`----`--------| |----`----| */ + TAB , Q , W , E , R , T , Y , U , I , O , P ,LBRC,RBRC, BSLS , DEL ,PGDN, + /*|------`----`----`----`----`----`----`----`----`----`----`----`----`------| `----`----' */ + X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, ENTER , + /*|-------`----`----`----`----`----`----`----`----`----`----`----`----------| ,----. */ + LSFT , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, RSFT , UP , + /*|---------`----`----`----`----`----`----`----`----`----`----`-------------.--|----|----. */ + LCTL ,LGUI ,LALT , SPACE , X1 ,RALT ,RCTL , LEFT,DOWN,RGHT + /*`-----+-----+-----+------------------------------+------+-----+-----' `----+----+----' */ + ), + + [_FN1] = KEYMAP( + /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */ + GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , VOLU,HOME, + /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */ + , , , UP , , , , , , , , , , , VOLD,END, + /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */ + , ,LEFT,DOWN,RGHT, , , , , , , , , + /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */ + , , , , , , ,MUTE, , , , , MUTE, + /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */ + , , , , , , , MPRV,MPLY,MNXT + /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */ + ), + + [_FN2] = KEYMAP( + /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */ + GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , VOLU,HOME, + /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */ + , , , UP , , , , 7 , 8 , 9 , , , , , VOLD,END, + /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */ + , ,LEFT,DOWN,RGHT, , , 4 , 5 , 6 , , , , + /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */ + , , , , , , 0 , 1 , 2 , 3 , , , MUTE, + /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */ + , , , , , , , MPRV,MPLY,MNXT + /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/handwired/magicforce68/magicforce68.c b/keyboards/handwired/magicforce68/magicforce68.c new file mode 100644 index 0000000000..84b1007e2c --- /dev/null +++ b/keyboards/handwired/magicforce68/magicforce68.c @@ -0,0 +1,8 @@ +#include "magicforce68.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} diff --git a/keyboards/handwired/magicforce68/magicforce68.h b/keyboards/handwired/magicforce68/magicforce68.h new file mode 100644 index 0000000000..cfcdce38d5 --- /dev/null +++ b/keyboards/handwired/magicforce68/magicforce68.h @@ -0,0 +1,20 @@ +#ifndef MAGICFORCE68_H +#define MAGICFORCE68_H + +#include "quantum.h" + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K2E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K3E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D, K4E \ + ) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_NO, KC_##K2E }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_##K3C, KC_##K3D, KC_##K3E }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/magicforce68/rules.mk b/keyboards/handwired/magicforce68/rules.mk new file mode 100644 index 0000000000..e897ef2523 --- /dev/null +++ b/keyboards/handwired/magicforce68/rules.mk @@ -0,0 +1,83 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro now"; \ + while [[ -z $$USB ]]; do \ + sleep 1; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ + done; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude diff --git a/keyboards/handwired/magicforce68/wiring-layout.png b/keyboards/handwired/magicforce68/wiring-layout.png Binary files differnew file mode 100644 index 0000000000..816b10b2b5 --- /dev/null +++ b/keyboards/handwired/magicforce68/wiring-layout.png diff --git a/keyboards/handwired/numpad20/Makefile b/keyboards/handwired/numpad20/Makefile new file mode 100644 index 0000000000..191c6bb664 --- /dev/null +++ b/keyboards/handwired/numpad20/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/numpad20/config.h b/keyboards/handwired/numpad20/config.h new file mode 100644 index 0000000000..847f2111f5 --- /dev/null +++ b/keyboards/handwired/numpad20/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xBB80 +#define PRODUCT_ID 0x0504 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Hexwire +#define PRODUCT Numpad 20 +#define DESCRIPTION Handwired 4x5 numpad + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F6, B1, B3, B6, B5 } +#define MATRIX_COL_PINS { D1, D0, F5, F4 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/numpad20/keymaps/default/keymap.c b/keyboards/handwired/numpad20/keymaps/default/keymap.c new file mode 100644 index 0000000000..37031206a9 --- /dev/null +++ b/keyboards/handwired/numpad20/keymaps/default/keymap.c @@ -0,0 +1,16 @@ +#include "numpad20.h" + +#define KC_ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = COMPACT_KEYMAP( + LEFT,RGHT, UP ,DOWN, \ + P7 , P8 , P9 ,PLUS, \ + P4 , P5 , P6 ,MINS, \ + P1 , P2 , P3 , ENT, \ + P0 ,DOT ,RGHT, TAB \ + ) +}; + +const uint16_t PROGMEM fn_actions[] = { +}; diff --git a/keyboards/handwired/numpad20/numpad20.c b/keyboards/handwired/numpad20/numpad20.c new file mode 100644 index 0000000000..101cf2cb4b --- /dev/null +++ b/keyboards/handwired/numpad20/numpad20.c @@ -0,0 +1,8 @@ +#include "numpad20.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} diff --git a/keyboards/handwired/numpad20/numpad20.h b/keyboards/handwired/numpad20/numpad20.h new file mode 100644 index 0000000000..191979be0d --- /dev/null +++ b/keyboards/handwired/numpad20/numpad20.h @@ -0,0 +1,20 @@ +#ifndef NUMPAD20_H +#define NUMPAD20_H + +#include "quantum.h" + +#define COMPACT_KEYMAP( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33, \ + K40, K41, K42, K43 \ + ) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03 }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13 }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23 }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33 }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_##K43 } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/numpad20/rules.mk b/keyboards/handwired/numpad20/rules.mk new file mode 100644 index 0000000000..e897ef2523 --- /dev/null +++ b/keyboards/handwired/numpad20/rules.mk @@ -0,0 +1,83 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro now"; \ + while [[ -z $$USB ]]; do \ + sleep 1; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ + done; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude diff --git a/keyboards/handwired/ortho5x13/Makefile b/keyboards/handwired/ortho5x13/Makefile new file mode 100644 index 0000000000..191c6bb664 --- /dev/null +++ b/keyboards/handwired/ortho5x13/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/ortho5x13/config.h b/keyboards/handwired/ortho5x13/config.h new file mode 100644 index 0000000000..f85159596c --- /dev/null +++ b/keyboards/handwired/ortho5x13/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xBB80 +#define PRODUCT_ID 0x050D +#define DEVICE_VER 0x0001 +#define MANUFACTURER Hexwire +#define PRODUCT Ortho 5x13 +#define DESCRIPTION Handwired 5x13 ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 13 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D3, D2, D1, D0, D4 } +#define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/ortho5x13/keymaps/default/keymap.c b/keyboards/handwired/ortho5x13/keymaps/default/keymap.c new file mode 100644 index 0000000000..c1262a83d7 --- /dev/null +++ b/keyboards/handwired/ortho5x13/keymaps/default/keymap.c @@ -0,0 +1,289 @@ +#include "ortho5x13.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + BACKLIT +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +#define KC_L1 LOWER +#define KC_L2 RAISE + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,------------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | + * |------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | + * |------+------+------+------+------+-------------+------+------+------+------+------+------| + * | ` | A | S | D | F | G | H | J | K | L | ; | ' | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | Up | + * |------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Hyper| Ctrl | Alt | GUI |Lower | Space |Raise | Bksp |Shift | Left | Down |Right | + * `------------------------------------------------------------------------------------------' + */ +[_QWERTY] = COMPACT_KEYMAP( + //,----+----+----+----+----+----+----+----+----+----+----+----+----. + ESC , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,EQL , + //|----+----+----+----+----+----+----+----+----+----+----+----+----| + TAB , Q , W , E , R , T , Y , U , I , O , P ,LBRC,RBRC, + //|----+----+----+----+----+----+----+----+----+----+----+----+----| + GRV , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,BSLS, + //|----+----+----+----+----+----+----+----+----+----+----+----+----| + LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,ENT , UP , + //|----+----+----+----+----+---------+----+----+----+----+----+----| + HYPR,LCTL,LALT,LGUI, L1 , SPACE , L2 ,BSPC,RSFT,LEFT,RGHT,DOWN + //`----+----+----+----+----+---------+----+----+----+----+----+----' + ), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | " | , | . | P | Y | F | G | C | R | L | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_DEL}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Audoff|Aud on|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Musoff|Mus on| | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE +float tone_startup[][2] = { + {NOTE_B5, 20}, + {NOTE_B6, 8}, + {NOTE_DS6, 20}, + {NOTE_B6, 8} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); + +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +}; + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/ortho5x13/ortho5x13.c b/keyboards/handwired/ortho5x13/ortho5x13.c new file mode 100644 index 0000000000..cf8352cc43 --- /dev/null +++ b/keyboards/handwired/ortho5x13/ortho5x13.c @@ -0,0 +1,8 @@ +#include "ortho5x13.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} diff --git a/keyboards/handwired/ortho5x13/ortho5x13.h b/keyboards/handwired/ortho5x13/ortho5x13.h new file mode 100644 index 0000000000..d442212fe9 --- /dev/null +++ b/keyboards/handwired/ortho5x13/ortho5x13.h @@ -0,0 +1,36 @@ +#ifndef ORTHO5X13_H +#define ORTHO5X13_H + +#include "quantum.h" + +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ + k40, k41, k42, k43, k44, k45, k47, k48, k49, k4a, k4b, k4c \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c }, \ + { k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b, k3c }, \ + { k40, k41, k42, k43, k44, k45, KC_NO, k47, k48, k49, k4a, k4b, k4c } \ +} + +#define COMPACT_KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ + k40, k41, k42, k43, k44, k45, k47, k48, k49, k4a, k4b, k4c \ +) \ +{ \ + { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b, KC_##k0c }, \ + { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b, KC_##k1c }, \ + { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b, KC_##k2c }, \ + { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k35, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b, KC_##k3c }, \ + { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45, KC_NO, KC_##k47, KC_##k48, KC_##k49, KC_##k4a, KC_##k4b, KC_##k4c } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/ortho5x13/rules.mk b/keyboards/handwired/ortho5x13/rules.mk new file mode 100644 index 0000000000..e897ef2523 --- /dev/null +++ b/keyboards/handwired/ortho5x13/rules.mk @@ -0,0 +1,83 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro now"; \ + while [[ -z $$USB ]]; do \ + sleep 1; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ + done; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude diff --git a/keyboards/lets_split/common/glcdfont.c b/keyboards/lets_split/common/glcdfont.c new file mode 100644 index 0000000000..6f88bd23a7 --- /dev/null +++ b/keyboards/lets_split/common/glcdfont.c @@ -0,0 +1,276 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#ifndef FONT5X7_H +#define FONT5X7_H + +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/pgmspace.h> +#elif defined(ESP8266) + #include <pgmspace.h> +#else + #define PROGMEM +#endif + +// Standard ASCII 5x7 font + +static const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, + 0x00, 0x18, 0x3C, 0x18, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, + 0x00, 0x18, 0x24, 0x18, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, + 0x30, 0x48, 0x3A, 0x06, 0x0E, + 0x26, 0x29, 0x79, 0x29, 0x26, + 0x40, 0x7F, 0x05, 0x05, 0x07, + 0x40, 0x7F, 0x05, 0x25, 0x3F, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, + 0x14, 0x22, 0x7F, 0x22, 0x14, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, + 0x06, 0x09, 0x7F, 0x01, 0x7F, + 0x00, 0x66, 0x89, 0x95, 0x6A, + 0x60, 0x60, 0x60, 0x60, 0x60, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, + 0x08, 0x04, 0x7E, 0x04, 0x08, + 0x10, 0x20, 0x7E, 0x20, 0x10, + 0x08, 0x08, 0x2A, 0x1C, 0x08, + 0x08, 0x1C, 0x2A, 0x08, 0x08, + 0x1E, 0x10, 0x10, 0x10, 0x10, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, + 0x30, 0x38, 0x3E, 0x38, 0x30, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, + 0x23, 0x13, 0x08, 0x64, 0x62, + 0x36, 0x49, 0x56, 0x20, 0x50, + 0x00, 0x08, 0x07, 0x03, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, + 0x08, 0x08, 0x3E, 0x08, 0x08, + 0x00, 0x80, 0x70, 0x30, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, + 0x00, 0x00, 0x60, 0x60, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, + 0x3E, 0x51, 0x49, 0x45, 0x3E, + 0x00, 0x42, 0x7F, 0x40, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, + 0x21, 0x41, 0x49, 0x4D, 0x33, + 0x18, 0x14, 0x12, 0x7F, 0x10, + 0x27, 0x45, 0x45, 0x45, 0x39, + 0x3C, 0x4A, 0x49, 0x49, 0x31, + 0x41, 0x21, 0x11, 0x09, 0x07, + 0x36, 0x49, 0x49, 0x49, 0x36, + 0x46, 0x49, 0x49, 0x29, 0x1E, + 0x00, 0x00, 0x14, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, + 0x14, 0x14, 0x14, 0x14, 0x14, + 0x00, 0x41, 0x22, 0x14, 0x08, + 0x02, 0x01, 0x59, 0x09, 0x06, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, + 0x7C, 0x12, 0x11, 0x12, 0x7C, + 0x7F, 0x49, 0x49, 0x49, 0x36, + 0x3E, 0x41, 0x41, 0x41, 0x22, + 0x7F, 0x41, 0x41, 0x41, 0x3E, + 0x7F, 0x49, 0x49, 0x49, 0x41, + 0x7F, 0x09, 0x09, 0x09, 0x01, + 0x3E, 0x41, 0x41, 0x51, 0x73, + 0x7F, 0x08, 0x08, 0x08, 0x7F, + 0x00, 0x41, 0x7F, 0x41, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, + 0x7F, 0x08, 0x14, 0x22, 0x41, + 0x7F, 0x40, 0x40, 0x40, 0x40, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, + 0x7F, 0x04, 0x08, 0x10, 0x7F, + 0x3E, 0x41, 0x41, 0x41, 0x3E, + 0x7F, 0x09, 0x09, 0x09, 0x06, + 0x3E, 0x41, 0x51, 0x21, 0x5E, + 0x7F, 0x09, 0x19, 0x29, 0x46, + 0x26, 0x49, 0x49, 0x49, 0x32, + 0x03, 0x01, 0x7F, 0x01, 0x03, + 0x3F, 0x40, 0x40, 0x40, 0x3F, + 0x1F, 0x20, 0x40, 0x20, 0x1F, + 0x3F, 0x40, 0x38, 0x40, 0x3F, + 0x63, 0x14, 0x08, 0x14, 0x63, + 0x03, 0x04, 0x78, 0x04, 0x03, + 0x61, 0x59, 0x49, 0x4D, 0x43, + 0x00, 0x7F, 0x41, 0x41, 0x41, + 0x02, 0x04, 0x08, 0x10, 0x20, + 0x00, 0x41, 0x41, 0x41, 0x7F, + 0x04, 0x02, 0x01, 0x02, 0x04, + 0x40, 0x40, 0x40, 0x40, 0x40, + 0x00, 0x03, 0x07, 0x08, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, + 0x7F, 0x28, 0x44, 0x44, 0x38, + 0x38, 0x44, 0x44, 0x44, 0x28, + 0x38, 0x44, 0x44, 0x28, 0x7F, + 0x38, 0x54, 0x54, 0x54, 0x18, + 0x00, 0x08, 0x7E, 0x09, 0x02, + 0x18, 0xA4, 0xA4, 0x9C, 0x78, + 0x7F, 0x08, 0x04, 0x04, 0x78, + 0x00, 0x44, 0x7D, 0x40, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, + 0x7C, 0x08, 0x04, 0x04, 0x78, + 0x38, 0x44, 0x44, 0x44, 0x38, + 0xFC, 0x18, 0x24, 0x24, 0x18, + 0x18, 0x24, 0x24, 0x18, 0xFC, + 0x7C, 0x08, 0x04, 0x04, 0x08, + 0x48, 0x54, 0x54, 0x54, 0x24, + 0x04, 0x04, 0x3F, 0x44, 0x24, + 0x3C, 0x40, 0x40, 0x20, 0x7C, + 0x1C, 0x20, 0x40, 0x20, 0x1C, + 0x3C, 0x40, 0x30, 0x40, 0x3C, + 0x44, 0x28, 0x10, 0x28, 0x44, + 0x4C, 0x90, 0x90, 0x90, 0x7C, + 0x44, 0x64, 0x54, 0x4C, 0x44, + 0x00, 0x08, 0x36, 0x41, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, + 0x3C, 0x26, 0x23, 0x26, 0x3C, + 0x1E, 0xA1, 0xA1, 0x61, 0x12, + 0x3A, 0x40, 0x40, 0x20, 0x7A, + 0x38, 0x54, 0x54, 0x55, 0x59, + 0x21, 0x55, 0x55, 0x79, 0x41, + 0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut + 0x21, 0x55, 0x54, 0x78, 0x40, + 0x20, 0x54, 0x55, 0x79, 0x40, + 0x0C, 0x1E, 0x52, 0x72, 0x12, + 0x39, 0x55, 0x55, 0x55, 0x59, + 0x39, 0x54, 0x54, 0x54, 0x59, + 0x39, 0x55, 0x54, 0x54, 0x58, + 0x00, 0x00, 0x45, 0x7C, 0x41, + 0x00, 0x02, 0x45, 0x7D, 0x42, + 0x00, 0x01, 0x45, 0x7C, 0x40, + 0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut + 0xF0, 0x28, 0x25, 0x28, 0xF0, + 0x7C, 0x54, 0x55, 0x45, 0x00, + 0x20, 0x54, 0x54, 0x7C, 0x54, + 0x7C, 0x0A, 0x09, 0x7F, 0x49, + 0x32, 0x49, 0x49, 0x49, 0x32, + 0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut + 0x32, 0x4A, 0x48, 0x48, 0x30, + 0x3A, 0x41, 0x41, 0x21, 0x7A, + 0x3A, 0x42, 0x40, 0x20, 0x78, + 0x00, 0x9D, 0xA0, 0xA0, 0x7D, + 0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut + 0x3D, 0x40, 0x40, 0x40, 0x3D, + 0x3C, 0x24, 0xFF, 0x24, 0x24, + 0x48, 0x7E, 0x49, 0x43, 0x66, + 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, + 0xFF, 0x09, 0x29, 0xF6, 0x20, + 0xC0, 0x88, 0x7E, 0x09, 0x03, + 0x20, 0x54, 0x54, 0x79, 0x41, + 0x00, 0x00, 0x44, 0x7D, 0x41, + 0x30, 0x48, 0x48, 0x4A, 0x32, + 0x38, 0x40, 0x40, 0x22, 0x7A, + 0x00, 0x7A, 0x0A, 0x0A, 0x72, + 0x7D, 0x0D, 0x19, 0x31, 0x7D, + 0x26, 0x29, 0x29, 0x2F, 0x28, + 0x26, 0x29, 0x29, 0x29, 0x26, + 0x30, 0x48, 0x4D, 0x40, 0x20, + 0x38, 0x08, 0x08, 0x08, 0x08, + 0x08, 0x08, 0x08, 0x08, 0x38, + 0x2F, 0x10, 0xC8, 0xAC, 0xBA, + 0x2F, 0x10, 0x28, 0x34, 0xFA, + 0x00, 0x00, 0x7B, 0x00, 0x00, + 0x08, 0x14, 0x2A, 0x14, 0x22, + 0x22, 0x14, 0x2A, 0x14, 0x08, + 0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code + 0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block + 0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block + 0x00, 0x00, 0x00, 0xFF, 0x00, + 0x10, 0x10, 0x10, 0xFF, 0x00, + 0x14, 0x14, 0x14, 0xFF, 0x00, + 0x10, 0x10, 0xFF, 0x00, 0xFF, + 0x10, 0x10, 0xF0, 0x10, 0xF0, + 0x14, 0x14, 0x14, 0xFC, 0x00, + 0x14, 0x14, 0xF7, 0x00, 0xFF, + 0x00, 0x00, 0xFF, 0x00, 0xFF, + 0x14, 0x14, 0xF4, 0x04, 0xFC, + 0x14, 0x14, 0x17, 0x10, 0x1F, + 0x10, 0x10, 0x1F, 0x10, 0x1F, + 0x14, 0x14, 0x14, 0x1F, 0x00, + 0x10, 0x10, 0x10, 0xF0, 0x00, + 0x00, 0x00, 0x00, 0x1F, 0x10, + 0x10, 0x10, 0x10, 0x1F, 0x10, + 0x10, 0x10, 0x10, 0xF0, 0x10, + 0x00, 0x00, 0x00, 0xFF, 0x10, + 0x10, 0x10, 0x10, 0x10, 0x10, + 0x10, 0x10, 0x10, 0xFF, 0x10, + 0x00, 0x00, 0x00, 0xFF, 0x14, + 0x00, 0x00, 0xFF, 0x00, 0xFF, + 0x00, 0x00, 0x1F, 0x10, 0x17, + 0x00, 0x00, 0xFC, 0x04, 0xF4, + 0x14, 0x14, 0x17, 0x10, 0x17, + 0x14, 0x14, 0xF4, 0x04, 0xF4, + 0x00, 0x00, 0xFF, 0x00, 0xF7, + 0x14, 0x14, 0x14, 0x14, 0x14, + 0x14, 0x14, 0xF7, 0x00, 0xF7, + 0x14, 0x14, 0x14, 0x17, 0x14, + 0x10, 0x10, 0x1F, 0x10, 0x1F, + 0x14, 0x14, 0x14, 0xF4, 0x14, + 0x10, 0x10, 0xF0, 0x10, 0xF0, + 0x00, 0x00, 0x1F, 0x10, 0x1F, + 0x00, 0x00, 0x00, 0x1F, 0x14, + 0x00, 0x00, 0x00, 0xFC, 0x14, + 0x00, 0x00, 0xF0, 0x10, 0xF0, + 0x10, 0x10, 0xFF, 0x10, 0xFF, + 0x14, 0x14, 0x14, 0xFF, 0x14, + 0x10, 0x10, 0x10, 0x1F, 0x00, + 0x00, 0x00, 0x00, 0xF0, 0x10, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, + 0xFF, 0xFF, 0xFF, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xFF, 0xFF, + 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, + 0x38, 0x44, 0x44, 0x38, 0x44, + 0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta + 0x7E, 0x02, 0x02, 0x06, 0x06, + 0x02, 0x7E, 0x02, 0x7E, 0x02, + 0x63, 0x55, 0x49, 0x41, 0x63, + 0x38, 0x44, 0x44, 0x3C, 0x04, + 0x40, 0x7E, 0x20, 0x1E, 0x20, + 0x06, 0x02, 0x7E, 0x02, 0x02, + 0x99, 0xA5, 0xE7, 0xA5, 0x99, + 0x1C, 0x2A, 0x49, 0x2A, 0x1C, + 0x4C, 0x72, 0x01, 0x72, 0x4C, + 0x30, 0x4A, 0x4D, 0x4D, 0x30, + 0x30, 0x48, 0x78, 0x48, 0x30, + 0xBC, 0x62, 0x5A, 0x46, 0x3D, + 0x3E, 0x49, 0x49, 0x49, 0x00, + 0x7E, 0x01, 0x01, 0x01, 0x7E, + 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, + 0x44, 0x44, 0x5F, 0x44, 0x44, + 0x40, 0x51, 0x4A, 0x44, 0x40, + 0x40, 0x44, 0x4A, 0x51, 0x40, + 0x00, 0x00, 0xFF, 0x01, 0x03, + 0xE0, 0x80, 0xFF, 0x00, 0x00, + 0x08, 0x08, 0x6B, 0x6B, 0x08, + 0x36, 0x12, 0x36, 0x24, 0x36, + 0x06, 0x0F, 0x09, 0x0F, 0x06, + 0x00, 0x00, 0x18, 0x18, 0x00, + 0x00, 0x00, 0x10, 0x10, 0x00, + 0x30, 0x40, 0xFF, 0x01, 0x01, + 0x00, 0x1F, 0x01, 0x01, 0x1E, + 0x00, 0x19, 0x1D, 0x17, 0x12, + 0x00, 0x3C, 0x3C, 0x3C, 0x3C, + 0x00, 0x00, 0x00, 0x00, 0x00 // #255 NBSP +}; +#endif // FONT5X7_H diff --git a/keyboards/lets_split/i2c.h b/keyboards/lets_split/i2c.h index 08ce4b0093..c15b6bc506 100644 --- a/keyboards/lets_split/i2c.h +++ b/keyboards/lets_split/i2c.h @@ -16,7 +16,7 @@ #define SLAVE_BUFFER_SIZE 0x10 // i2c SCL clock frequency -#define SCL_CLOCK 100000L +#define SCL_CLOCK 400000L extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; @@ -28,4 +28,22 @@ uint8_t i2c_master_read(int); void i2c_reset_state(void); void i2c_slave_init(uint8_t address); + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); + #endif diff --git a/keyboards/lets_split/keymaps/OLED_sample/Makefile b/keyboards/lets_split/keymaps/OLED_sample/Makefile new file mode 100644 index 0000000000..90616d1f19 --- /dev/null +++ b/keyboards/lets_split/keymaps/OLED_sample/Makefile @@ -0,0 +1,25 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +ONEHAND_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/lets_split/keymaps/OLED_sample/config.h b/keyboards/lets_split/keymaps/OLED_sample/config.h new file mode 100644 index 0000000000..353ea368c6 --- /dev/null +++ b/keyboards/lets_split/keymaps/OLED_sample/config.h @@ -0,0 +1,45 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#define USE_I2C +//#define USE_SERIAL +//#define MASTER_RIGHT +#define FLIP_HALF + +#define SSD1306OLED + + +#define PREVENT_STUCK_MODIFIERS +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 6 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + + + + +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" +#endif
\ No newline at end of file diff --git a/keyboards/lets_split/keymaps/OLED_sample/keymap.c b/keyboards/lets_split/keymaps/OLED_sample/keymap.c new file mode 100644 index 0000000000..072b825abe --- /dev/null +++ b/keyboards/lets_split/keymaps/OLED_sample/keymap.c @@ -0,0 +1,356 @@ +#include "lets_split.h" +#include "bootloader.h" +#include "action_layer.h" +#include "eeconfig.h" +#include "tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/TWI.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +extern keymap_config_t keymap_config; + +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; + + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, + BACKLIT, + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, +}; + +enum macro_keycodes { + KC_SAMPLEMACRO, +}; + + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +//Macros +#define M_SAMPLE M(KC_SAMPLEMACRO) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = KEYMAP( \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = KEYMAP( \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP( \ + _______, RESET, _______, M_SAMPLE, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) + + +}; + + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +// define variables for reactive RGB +bool TOG_STATUS = false; +int RGB_current_mode; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + rgblight_mode(RGB_current_mode); + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + rgblight_mode(16); + } + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + TOG_STATUS = false; + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + rgblight_mode(15); + } + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + layer_off(_RAISE); + TOG_STATUS = false; + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + case RGB_MOD: + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif + RGB_current_mode = rgblight_config.mode; +} + +//SSD1306 OLED init and update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED +void matrix_master_OLED_init (void) { + TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000)); + iota_gfx_init(); // turns on the display +} + +void matrix_scan_user(void) { + iota_gfx_task(); // this is what updates the display continuously +} +#endif + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif + +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + + switch (id) { + case KC_SAMPLEMACRO: + if (record->event.pressed){ + return MACRO (I(10), T(H), T(E), T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D), END); + } + + } + + return MACRO_NONE; +} diff --git a/keyboards/lets_split/keymaps/OLED_sample/readme.md b/keyboards/lets_split/keymaps/OLED_sample/readme.md new file mode 100644 index 0000000000..02888855b8 --- /dev/null +++ b/keyboards/lets_split/keymaps/OLED_sample/readme.md @@ -0,0 +1,25 @@ +SSD1306 OLED Display via I2C +====== + +Features +-------- + +Some features supported by the firmware: + + +* I2C connection between the two halves is required as the OLED display will use this connection as well. Note this + requires pull-up resistors on the data and clock lines. +* OLED display will connect from either side + + +Wiring +------ + + +Work in progress... + + +OLED Configuration +------------------------------- + +Work in progress... diff --git a/keyboards/lets_split/keymaps/hexwire/Makefile b/keyboards/lets_split/keymaps/hexwire/Makefile new file mode 100644 index 0000000000..1e57612788 --- /dev/null +++ b/keyboards/lets_split/keymaps/hexwire/Makefile @@ -0,0 +1,5 @@ +RGBLIGHT_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/lets_split/keymaps/hexwire/README.md b/keyboards/lets_split/keymaps/hexwire/README.md new file mode 100644 index 0000000000..edf2b66276 --- /dev/null +++ b/keyboards/lets_split/keymaps/hexwire/README.md @@ -0,0 +1,108 @@ +Hexwire's Let's Split Layout +============================ + +### Changes from default layout + +- Main layer + - The right space bar key has been changed to backspace, as I only hit space with my left thumb + - Backtick is at the lower right and also serves goes to the 3rd function layer when held + - Enter key acts as shift when held + - Escape key acts as control when held + - Minus key at upper right +- Lower layer + - Numbers are on the lower layer, to make it easier to use a numpad on the right hand + - Arrow keys + - Straight and curly brackets in the middle two columns + - Screenshot keys for MacOS +- Upper layer + - Symbols are on the upper layer + - Media keys + - Page Up/Down, Home/End +- 3rd function layer + - Function keys + +## Layouts + +### Qwerty + +``` +,----+----+----+----+----+----. ,----+----+----+----+----+----. + TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS, +|----+----+----+----+----+----| |----+----+----+----+----+----| + X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, +|----+----+----+----+----+----| |----+----+----+----+----+----| + LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 , +|----+----+----+----+----+----| |----+----+----+----+----+----| + X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT +`----+----+----+----+----+----' `----+----+----+----+----+----' +``` + +### Colemak + +``` +,----+----+----+----+----+----. ,----+----+----+----+----+----. + TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS, +|----+----+----+----+----+----| |----+----+----+----+----+----| + X0 , A , R , S , T , D , H , N , E , I , O ,QUOT, +|----+----+----+----+----+----| |----+----+----+----+----+----| + LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 , +|----+----+----+----+----+----| |----+----+----+----+----+----| + X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT +`----+----+----+----+----+----' `----+----+----+----+----+----' +``` + +### Dvorak + +``` +,----+----+----+----+----+----. ,----+----+----+----+----+----. + TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS, +|----+----+----+----+----+----| |----+----+----+----+----+----| + X0 , A , O , E , U , I , D , H , R , N , S ,SLSH, +|----+----+----+----+----+----| |----+----+----+----+----+----| + LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 , +|----+----+----+----+----+----| |----+----+----+----+----+----| + X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT +`----+----+----+----+----+----' `----+----+----+----+----+----' +``` + +### Lower + +``` +,----+----+----+----+----+----. ,----+----+----+----+----+----. + , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , +|----+----+----+----+----+----| |----+----+----+----+----+----| + DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE, +|----+----+----+----+----+----| |----+----+----+----+----+----| + ,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, , +|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , DEL , , P0 ,PDOT, , +`----+----+----+----+----+----' `----+----+----+----+----+----' +``` + +### Raise + +``` +,----+----+----+----+----+----. ,----+----+----+----+----+----. + ,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, , +|----+----+----+----+----+----| |----+----+----+----+----+----| + DEL ,MPRV,MNXT,VOLU,PGUP,UNDS, EQL ,HOME, , , ,BSLS, +|----+----+----+----+----+----| |----+----+----+----+----+----| + MUTE,MSTP,MPLY,VOLD,PGDN,MINS, PLUS,END , , , , , +|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , , , , , , +`----+----+----+----+----+----' `----+----+----+----+----+----' +``` + +### 3rd function layer + +``` +,----+----+----+----+----+----. ,----+----+----+----+----+----. + F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 , +|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , , , , , , , +|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , , , , , , , +|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , , , , , , +`----+----+----+----+----+----' `----+----+----+----+----+----' +``` diff --git a/keyboards/lets_split/keymaps/hexwire/config.h b/keyboards/lets_split/keymaps/hexwire/config.h new file mode 100644 index 0000000000..9c8c6d7f40 --- /dev/null +++ b/keyboards/lets_split/keymaps/hexwire/config.h @@ -0,0 +1,70 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + + +#define USE_SERIAL + +#define TAPPING_TERM 150 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" + #define COMPACT_KEYMAP( \ + k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ + k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ + k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ + k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ + ) \ + { \ + { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05 }, \ + { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15 }, \ + { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25 }, \ + { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35 }, \ + { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45 }, \ + { KC_##k50, KC_##k51, KC_##k52, KC_##k53, KC_##k54, KC_##k55 }, \ + { KC_##k60, KC_##k61, KC_##k62, KC_##k63, KC_##k64, KC_##k65 }, \ + { KC_##k70, KC_##k71, KC_##k72, KC_##k73, KC_##k74, KC_##k75 } \ + } +#endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" + #define COMPACT_KEYMAP( \ + k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \ + k10, k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, k50, \ + k20, k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, k60, \ + k30, k31, k32, k33, k34, k35, k75, k74, k73, k72, k71, k70 \ + ) \ + { \ + { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05 }, \ + { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15 }, \ + { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25 }, \ + { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35 }, \ + { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45 }, \ + { KC_##k50, KC_##k51, KC_##k52, KC_##k53, KC_##k54, KC_##k55 }, \ + { KC_##k60, KC_##k61, KC_##k62, KC_##k63, KC_##k64, KC_##k65 }, \ + { KC_##k70, KC_##k71, KC_##k72, KC_##k73, KC_##k74, KC_##k75 } \ + } +#endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" +#endif diff --git a/keyboards/lets_split/keymaps/hexwire/keymap.c b/keyboards/lets_split/keymaps/hexwire/keymap.c new file mode 100644 index 0000000000..f8370490d6 --- /dev/null +++ b/keyboards/lets_split/keymaps/hexwire/keymap.c @@ -0,0 +1,205 @@ +#include "lets_split.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _FN3 5 +#define _FN4 6 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + FN3, + FN4, + ADJUST, +}; + +#define KC_ KC_TRNS +#define _______ KC_TRNS + +#define KC_CAPW LGUI(LSFT(KC_3)) // Capture whole screen +#define KC_CPYW LGUI(LSFT(LCTL(KC_3))) // Copy whole screen +#define KC_CAPP LGUI(LSFT(KC_4)) // Capture portion of screen +#define KC_CPYP LGUI(LSFT(LCTL(KC_4))) // Copy portion of screen +#define KC_X0 MT(MOD_LCTL, KC_ESC) +#define KC_X1 LOWER +#define KC_X2 RAISE +#define KC_X3 LT(_FN3, KC_GRV) +#define KC_X4 MT(MOD_LSFT, KC_ENT) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT + //`----+----+----+----+----+----' `----+----+----+----+----+----' + ), + + [_COLEMAK] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + X0 , A , R , S , T , D , H , N , E , I , O ,QUOT, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT + //`----+----+----+----+----+----' `----+----+----+----+----+----' + ), + + [_DVORAK] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + X0 , A , O , E , U , I , D , H , R , N , S ,SLSH, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT + //`----+----+----+----+----+----' `----+----+----+----+----+----' + ), + + [_LOWER] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + ,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , DEL , , P0 ,PDOT, , + //`----+----+----+----+----+----' `----+----+----+----+----+----' + ), + + [_RAISE] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + ,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + DEL ,MPRV,MNXT,VOLU,PGUP,UNDS, EQL ,HOME, , , ,BSLS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + MUTE,MSTP,MPLY,VOLD,PGDN,MINS, PLUS,END , , , , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , , , , , , + //`----+----+----+----+----+----' `----+----+----+----+----+----' + ), + + [_FN3] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , , , , , , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , , , , , , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , , , , , , + //`----+----+----+----+----+----' `----+----+----+----+----+----' + ), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|Sat Up|Sat Dn|Val Up|Val Dn| | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ + [_ADJUST] = KEYMAP( \ + _______, RESET , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ) + + +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/lets_split/keymaps/smt/config.h b/keyboards/lets_split/keymaps/smt/config.h new file mode 100644 index 0000000000..ba271d1ac6 --- /dev/null +++ b/keyboards/lets_split/keymaps/smt/config.h @@ -0,0 +1,34 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define _MASTER_RIGHT +// #define EE_HANDS + + +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" +#endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" +#endif diff --git a/keyboards/lets_split/keymaps/smt/keymap.c b/keyboards/lets_split/keymaps/smt/keymap.c new file mode 100644 index 0000000000..c4bdb7ebc4 --- /dev/null +++ b/keyboards/lets_split/keymaps/smt/keymap.c @@ -0,0 +1,219 @@ +#include "lets_split.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Custom macros +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Alt+Shift) +#define MEH_GRV MEH_T(KC_GRV) // Tap for Backtick, hold for Meh (Ctrl+Alt+Shift) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------. ,-----------------------------------------. + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Esc | A | S | D | F | G | | H | J | K | L | ; | " | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space | |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------' `-----------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, \ + MEH_GRV, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Colemak + * ,-----------------------------------------. ,-----------------------------------------. + * | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Esc | A | R | S | T | D | | H | N | E | I | O | " | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | K | M | , | . | / |Enter | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space | |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------' `-----------------------------------------' + */ +[_COLEMAK] = KEYMAP( \ + HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, \ + MEH_GRV, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Dvorak + * ,-----------------------------------------. ,-----------------------------------------. + * | Tab | " | , | . | P | Y | | F | G | C | R | L | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Esc | A | O | E | U | I | | D | H | T | N | S | - | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space | |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------' `-----------------------------------------' + */ +[_DVORAK] = KEYMAP( \ + HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ + CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT, \ + MEH_GRV, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Lower + * ,-----------------------------------------. ,-----------------------------------------. + * | 0 | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | $ | F1 | F2 | F3 | F4 | F5 | | F6 | 4 | 5 | 6 | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | F12 | 1 | 2 | 3 | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------' `-----------------------------------------' + */ +[_LOWER] = KEYMAP( \ + ALL_T(KC_0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + CTL_T(KC_DLR), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_4, KC_5, KC_6, _______, _______, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_1, KC_2, KC_3, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY +), + +/* Raise + * ,-----------------------------------------. ,-----------------------------------------. + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | _ | ? | + | { | } | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | - | / | = | [ | ] | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | Home |PageDn|PageUp| End | + * `-----------------------------------------' `-----------------------------------------' + */ +[_RAISE] = KEYMAP( \ + ALL_T(KC_TILD), KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ + _______, _______, _______, _______, _______, _______, KC_UNDS, KC_QUES, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, _______, _______, _______, _______, _______, KC_MINS, KC_SLSH, KC_EQL, KC_LBRC, KC_RBRC, SFT_T(KC_BSLS), \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------. ,-----------------------------------------. + * | | Reset| | | | | | | | | | | Reset| + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm| |AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | | | + * `-----------------------------------------' `-----------------------------------------' + */ +[_ADJUST] = KEYMAP( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/lets_split/keymaps/smt/readme.md b/keyboards/lets_split/keymaps/smt/readme.md new file mode 100644 index 0000000000..20bc662f0a --- /dev/null +++ b/keyboards/lets_split/keymaps/smt/readme.md @@ -0,0 +1,88 @@ +# smt's Let's Split keymap + +This keymap is ported from my Planck keymap. + + +## Qwerty + +``` +,-----------------------------------------. ,-----------------------------------------. +| Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Esc | A | S | D | F | G | | H | J | K | L | ; | " | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| ` | Ctrl | Alt | GUI |Lower |Space | |Space |Raise | Left | Down | Up |Right | +`-----------------------------------------' `-----------------------------------------' +``` + +## Colemak + +``` +,-----------------------------------------. ,-----------------------------------------. +| Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Esc | A | R | S | T | D | | H | N | E | I | O | " | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Shift| Z | X | C | V | B | | K | M | , | . | / |Enter | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| ` | Ctrl | Alt | GUI |Lower |Space | |Space |Raise | Left | Down | Up |Right | +`-----------------------------------------' `-----------------------------------------' +``` + +## Dvorak + +``` +,-----------------------------------------. ,-----------------------------------------. +| Tab | " | , | . | P | Y | | F | G | C | R | L | Bksp | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Esc | A | O | E | U | I | | D | H | T | N | S | - | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Shift| ; | Q | J | K | X | | B | M | W | V | Z |Enter | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| ` | Ctrl | Alt | GUI |Lower |Space | |Space |Raise | Left | Down | Up |Right | +`-----------------------------------------' `-----------------------------------------' +``` + +## Lower + +``` +,-----------------------------------------. ,-----------------------------------------. +| 0 | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| $ | F1 | F2 | F3 | F4 | F5 | | F6 | 4 | 5 | 6 | | | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | F7 | F8 | F9 | F10 | F11 | | F12 | 1 | 2 | 3 | | | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | | | | | | | | | Next | Vol- | Vol+ | Play | +`-----------------------------------------' `-----------------------------------------' +``` + +## Raise + +``` +,-----------------------------------------. ,-----------------------------------------. +| ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | Del | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | | | | | | | _ | ? | + | { | } | | | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | | | | | | | - | / | = | [ | ] | \ | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | | | | | | | | | Home |PageDn|PageUp| End | +`-----------------------------------------' `-----------------------------------------' +``` + +## Adjust (Lower + Raise) + +``` +,-----------------------------------------. ,-----------------------------------------. +| | Reset| | | | | | | | | | | Reset| +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | | |Aud on|Audoff|AGnorm| |AGswap|Qwerty|Colemk|Dvorak| | | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | | | | | | | | | | | | | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | | | | | | | | | | | | | +`-----------------------------------------' `-----------------------------------------' +``` diff --git a/keyboards/lets_split/matrix.c b/keyboards/lets_split/matrix.c index 1389690042..81dfb14455 100644 --- a/keyboards/lets_split/matrix.c +++ b/keyboards/lets_split/matrix.c @@ -226,9 +226,7 @@ uint8_t matrix_scan(void) TXLED0; error_count = 0; } - matrix_scan_quantum(); - return ret; } diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h index 2f5bde9531..5fb87cf5d7 100644 --- a/keyboards/lets_split/rev1/config.h +++ b/keyboards/lets_split/rev1/config.h @@ -63,6 +63,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 16 // Number of LEDs +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/lets_split/rev2/rev2.c b/keyboards/lets_split/rev2/rev2.c index c505d3a6e3..8bfa171d01 100644 --- a/keyboards/lets_split/rev2/rev2.c +++ b/keyboards/lets_split/rev2/rev2.c @@ -5,6 +5,13 @@ float tone_goodbye[][2] = SONG(GOODBYE_SOUND); #endif +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} +#endif + void matrix_init_kb(void) { #ifdef AUDIO_ENABLE @@ -30,3 +37,4 @@ void shutdown_user(void) { stop_all_notes(); #endif } + diff --git a/keyboards/lets_split/rev2/rev2.h b/keyboards/lets_split/rev2/rev2.h index 990976de2b..054731366e 100644 --- a/keyboards/lets_split/rev2/rev2.h +++ b/keyboards/lets_split/rev2/rev2.h @@ -6,23 +6,66 @@ //void promicro_bootloader_jmp(bool program); #include "quantum.h" + +#ifdef USE_I2C +#include <stddef.h> +#ifdef __AVR__ +#include <avr/io.h> +#include <avr/interrupt.h> +#endif +#ifdef SSD1306OLED +extern bool iota_gfx_init(void); +extern void iota_gfx_task(void); +extern bool iota_gfx_off(void); +extern bool iota_gfx_on(void); +extern void iota_gfx_flush(void); +extern void iota_gfx_write_char(uint8_t c); +extern void iota_gfx_write(const char *data); +extern void iota_gfx_write_P(const char *data); +extern void iota_gfx_clear_screen(void); +#endif +#endif + //void promicro_bootloader_jmp(bool program); +#ifndef FLIP_HALF +//Standard Keymap #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \ - k10, k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, k50, \ - k20, k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, k60, \ - k30, k31, k32, k33, k34, k35, k75, k74, k73, k72, k71, k70 \ + k40, k41, k42, k43, k44, k45, k05, k04, k03, k02, k01, k00, \ + k50, k51, k52, k53, k54, k55, k15, k14, k13, k12, k11, k10, \ + k60, k61, k62, k63, k64, k65, k25, k24, k23, k22, k21, k20, \ + k70, k71, k72, k73, k74, k75, k35, k34, k33, k32, k31, k30 \ + ) \ + { \ + { k45, k44, k43, k42, k41, k40 }, \ + { k55, k54, k53, k52, k51, k50 }, \ + { k65, k64, k63, k62, k61, k60 }, \ + { k75, k74, k73, k72, k71, k70 }, \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k33, k34, k35 } \ + } + +#else +// Keymap with one side flipped +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ + k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ + k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ + k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ ) \ { \ { k00, k01, k02, k03, k04, k05 }, \ { k10, k11, k12, k13, k14, k15 }, \ { k20, k21, k22, k23, k24, k25 }, \ { k30, k31, k32, k33, k34, k35 }, \ - { k40, k41, k42, k43, k44, k45 }, \ - { k50, k51, k52, k53, k54, k55 }, \ - { k60, k61, k62, k63, k64, k65 }, \ - { k70, k71, k72, k73, k74, k75 } \ + { k45, k44, k43, k42, k41, k40 }, \ + { k55, k54, k53, k52, k51, k50 }, \ + { k65, k64, k63, k62, k61, k60 }, \ + { k75, k74, k73, k72, k71, k70 } \ } +#endif + #endif
\ No newline at end of file diff --git a/keyboards/lets_split/rev2fliphalf/rev2fliphalf.c b/keyboards/lets_split/rev2fliphalf/rev2fliphalf.c deleted file mode 100644 index c505d3a6e3..0000000000 --- a/keyboards/lets_split/rev2fliphalf/rev2fliphalf.c +++ /dev/null @@ -1,32 +0,0 @@ -#include "lets_split.h" - -#ifdef AUDIO_ENABLE - float tone_startup[][2] = SONG(STARTUP_SOUND); - float tone_goodbye[][2] = SONG(GOODBYE_SOUND); -#endif - -void matrix_init_kb(void) { - - #ifdef AUDIO_ENABLE - _delay_ms(20); // gets rid of tick - PLAY_NOTE_ARRAY(tone_startup, false, 0); - #endif - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; - -void shutdown_user(void) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_goodbye, false, 0); - _delay_ms(150); - stop_all_notes(); - #endif -} diff --git a/keyboards/lets_split/rev2fliphalf/rev2fliphalf.h b/keyboards/lets_split/rev2fliphalf/rev2fliphalf.h deleted file mode 100644 index 7dc8e5ba8f..0000000000 --- a/keyboards/lets_split/rev2fliphalf/rev2fliphalf.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef REV2FLIPHALF_H -#define REV2FLIPHALF_H - -#include "../lets_split.h" - -//void promicro_bootloader_jmp(bool program); -#include "quantum.h" - -//void promicro_bootloader_jmp(bool program); - -#define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ - k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ - k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ - k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ - ) \ - { \ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 }, \ - { k40, k41, k42, k43, k44, k45 }, \ - { k50, k51, k52, k53, k54, k55 }, \ - { k60, k61, k62, k63, k64, k65 }, \ - { k70, k71, k72, k73, k74, k75 } \ - } - -#endif
\ No newline at end of file diff --git a/keyboards/lets_split/rev2fliphalf/rules.mk b/keyboards/lets_split/rev2fliphalf/rules.mk deleted file mode 100644 index 80a942d06f..0000000000 --- a/keyboards/lets_split/rev2fliphalf/rules.mk +++ /dev/null @@ -1,5 +0,0 @@ -BACKLIGHT_ENABLE = no - -ifndef QUANTUM_DIR - include ../../../Makefile -endif diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index 0efa785505..ff159e0f06 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -1,7 +1,8 @@ SRC += matrix.c \ i2c.c \ split_util.c \ - serial.c + serial.c\ + ssd1306.c # MCU name #MCU = at90usb1287 @@ -73,15 +74,3 @@ USE_I2C ?= yes SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes - -avrdude: build - ls /dev/tty* > /tmp/1; \ - echo "Reset your Pro Micro now"; \ - while [[ -z $$USB ]]; do \ - sleep 1; \ - ls /dev/tty* > /tmp/2; \ - USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ - done; \ - avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex - -.PHONY: avrdude diff --git a/keyboards/lets_split/split_util.c b/keyboards/lets_split/split_util.c index 226dc18816..46586fbc00 100644 --- a/keyboards/lets_split/split_util.c +++ b/keyboards/lets_split/split_util.c @@ -21,7 +21,7 @@ static void setup_handedness(void) { #ifdef EE_HANDS isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); #else - // I2C_MASTER_RIGHT is deprecated use MASTER_RIGHT instead since this works for both serial and i2c + // I2c_MASTER_RIGHT ish deprecate use MASTER_RIGHT instead since this works for both serial and i2c: #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) isLeftHand = !has_usb(); #else @@ -33,6 +33,9 @@ static void setup_handedness(void) { static void keyboard_master_setup(void) { #ifdef USE_I2C i2c_master_init(); +#ifdef SSD1306OLED + matrix_master_OLED_init (); +#endif #else serial_master_init(); #endif diff --git a/keyboards/lets_split/split_util.h b/keyboards/lets_split/split_util.h index 6b896679ca..3ae76c209a 100644 --- a/keyboards/lets_split/split_util.h +++ b/keyboards/lets_split/split_util.h @@ -19,4 +19,6 @@ void split_keyboard_setup(void); bool has_usb(void); void keyboard_slave_loop(void); +void matrix_master_OLED_init (void); + #endif diff --git a/keyboards/lets_split/ssd1306.c b/keyboards/lets_split/ssd1306.c new file mode 100644 index 0000000000..3c7816bb32 --- /dev/null +++ b/keyboards/lets_split/ssd1306.c @@ -0,0 +1,468 @@ +#include "config.h" +#include "i2c.h" +#include <stdbool.h> +#include <string.h> +#include <stdio.h> +#include "print.h" +#include "lets_split.h" +#include "common/glcdfont.c" +#ifdef ADAFRUIT_BLE_ENABLE +#include "adafruit_ble.h" +#endif +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#endif +#include "sendchar.h" +#include "pincontrol.h" + +//assign the right code to your layers +#define _BASE 0 +#define _LOWER 8 +#define _RAISE 16 +#define _FNLAYER 64 +#define _NUMLAY 128 +#define _NLOWER 136 +#define _NFNLAYER 192 +#define _MOUSECURSOR 256 +#define _ADJUST 65560 + +// Set this to 1 to help diagnose early startup problems +// when testing power-on with ble. Turn it off otherwise, +// as the latency of printing most of the debug info messes +// with the matrix scan, causing keys to drop. +#define DEBUG_TO_SCREEN 0 + +// Controls the SSD1306 128x32 OLED display via i2c + +#define i2cAddress 0x3C + +#define DisplayHeight 32 +#define DisplayWidth 128 + +#define FontHeight 8 +#define FontWidth 6 + +#define MatrixRows (DisplayHeight / FontHeight) +#define MatrixCols (DisplayWidth / FontWidth) + +struct CharacterMatrix { + uint8_t display[MatrixRows][MatrixCols]; + uint8_t *cursor; + bool dirty; +}; + +static struct CharacterMatrix display; +//static uint16_t last_battery_update; +//static uint32_t vbat; +//#define BatteryUpdateInterval 10000 /* milliseconds */ +#define ScreenOffInterval 300000 /* milliseconds */ +#if DEBUG_TO_SCREEN +static uint8_t displaying; +#endif +static uint16_t last_flush; + +enum ssd1306_cmds { + DisplayOff = 0xAE, + DisplayOn = 0xAF, + + SetContrast = 0x81, + DisplayAllOnResume = 0xA4, + + DisplayAllOn = 0xA5, + NormalDisplay = 0xA6, + InvertDisplay = 0xA7, + SetDisplayOffset = 0xD3, + SetComPins = 0xda, + SetVComDetect = 0xdb, + SetDisplayClockDiv = 0xD5, + SetPreCharge = 0xd9, + SetMultiPlex = 0xa8, + SetLowColumn = 0x00, + SetHighColumn = 0x10, + SetStartLine = 0x40, + + SetMemoryMode = 0x20, + ColumnAddr = 0x21, + PageAddr = 0x22, + + ComScanInc = 0xc0, + ComScanDec = 0xc8, + SegRemap = 0xa0, + SetChargePump = 0x8d, + ExternalVcc = 0x01, + SwitchCapVcc = 0x02, + + ActivateScroll = 0x2f, + DeActivateScroll = 0x2e, + SetVerticalScrollArea = 0xa3, + RightHorizontalScroll = 0x26, + LeftHorizontalScroll = 0x27, + VerticalAndRightHorizontalScroll = 0x29, + VerticalAndLeftHorizontalScroll = 0x2a, +}; + + +// Write command sequence. +// Returns true on success. +static inline bool _send_cmd1(uint8_t cmd) { + bool res = false; + + if (i2c_start_write(i2cAddress)) { + xprintf("failed to start write to %d\n", i2cAddress); + goto done; + } + + if (i2c_master_write(0x0 /* command byte follows */)) { + print("failed to write control byte\n"); + + goto done; + } + + if (i2c_master_write(cmd)) { + xprintf("failed to write command %d\n", cmd); + goto done; + } + res = true; +done: + i2c_master_stop(); + return res; +} + +// Write 2-byte command sequence. +// Returns true on success +static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { + if (!_send_cmd1(cmd)) { + return false; + } + return _send_cmd1(opr); +} + +// Write 3-byte command sequence. +// Returns true on success +static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { + if (!_send_cmd1(cmd)) { + return false; + } + if (!_send_cmd1(opr1)) { + return false; + } + return _send_cmd1(opr2); +} + +#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} +#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} +#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} + +static void matrix_clear(struct CharacterMatrix *matrix); + +static void clear_display(void) { + matrix_clear(&display); + + // Clear all of the display bits (there can be random noise + // in the RAM on startup) + send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); + send_cmd3(ColumnAddr, 0, DisplayWidth - 1); + + if (i2c_start_write(i2cAddress)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < DisplayWidth; ++col) { + i2c_master_write(0); + } + } + + display.dirty = false; + +done: + i2c_master_stop(); +} + +#if DEBUG_TO_SCREEN +#undef sendchar +static int8_t capture_sendchar(uint8_t c) { + sendchar(c); + iota_gfx_write_char(c); + + if (!displaying) { + iota_gfx_flush(); + } + return 0; +} +#endif + +bool iota_gfx_init(void) { + bool success = false; + + send_cmd1(DisplayOff); + send_cmd2(SetDisplayClockDiv, 0x80); + send_cmd2(SetMultiPlex, DisplayHeight - 1); + + send_cmd2(SetDisplayOffset, 0); + + + send_cmd1(SetStartLine | 0x0); + send_cmd2(SetChargePump, 0x14 /* Enable */); + send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); + +/// Flips the display orientation 0 degrees + send_cmd1(SegRemap | 0x1); + send_cmd1(ComScanDec); +/* +// the following Flip the display orientation 180 degrees + send_cmd1(SegRemap); + send_cmd1(ComScanInc); +// end flip */ + send_cmd2(SetComPins, 0x2); + send_cmd2(SetContrast, 0x8f); + send_cmd2(SetPreCharge, 0xf1); + send_cmd2(SetVComDetect, 0x40); + send_cmd1(DisplayAllOnResume); + send_cmd1(NormalDisplay); + send_cmd1(DeActivateScroll); + send_cmd1(DisplayOn); + + send_cmd2(SetContrast, 0); // Dim + + clear_display(); + + success = true; + + iota_gfx_flush(); + +#if DEBUG_TO_SCREEN + print_set_sendchar(capture_sendchar); +#endif + +done: + return success; +} + +bool iota_gfx_off(void) { + bool success = false; + + send_cmd1(DisplayOff); + success = true; + +done: + return success; +} + +bool iota_gfx_on(void) { + bool success = false; + + send_cmd1(DisplayOn); + success = true; + +done: + return success; +} + +static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { + *matrix->cursor = c; + ++matrix->cursor; + + if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { + // We went off the end; scroll the display upwards by one line + memmove(&matrix->display[0], &matrix->display[1], + MatrixCols * (MatrixRows - 1)); + matrix->cursor = &matrix->display[MatrixRows - 1][0]; + memset(matrix->cursor, ' ', MatrixCols); + } +} + +static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { + matrix->dirty = true; + + if (c == '\n') { + // Clear to end of line from the cursor and then move to the + // start of the next line + uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; + + while (cursor_col++ < MatrixCols) { + matrix_write_char_inner(matrix, ' '); + } + return; + } + + matrix_write_char_inner(matrix, c); +} + +void iota_gfx_write_char(uint8_t c) { + matrix_write_char(&display, c); +} + +static void matrix_write(struct CharacterMatrix *matrix, const char *data) { + const char *end = data + strlen(data); + while (data < end) { + matrix_write_char(matrix, *data); + ++data; + } +} + +void iota_gfx_write(const char *data) { + matrix_write(&display, data); +} + +static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { + while (true) { + uint8_t c = pgm_read_byte(data); + if (c == 0) { + return; + } + matrix_write_char(matrix, c); + ++data; + } +} + +void iota_gfx_write_P(const char *data) { + matrix_write_P(&display, data); +} + +static void matrix_clear(struct CharacterMatrix *matrix) { + memset(matrix->display, ' ', sizeof(matrix->display)); + matrix->cursor = &matrix->display[0][0]; + matrix->dirty = true; +} + +void iota_gfx_clear_screen(void) { + matrix_clear(&display); +} + +static void matrix_render(struct CharacterMatrix *matrix) { + last_flush = timer_read(); + iota_gfx_on(); +#if DEBUG_TO_SCREEN + ++displaying; +#endif + + // Move to the home position + send_cmd3(PageAddr, 0, MatrixRows - 1); + send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); + + if (i2c_start_write(i2cAddress)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < MatrixCols; ++col) { + const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1)); + + for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) { + uint8_t colBits = pgm_read_byte(glyph + glyphCol); + i2c_master_write(colBits); + } + + // 1 column of space between chars (it's not included in the glyph) + i2c_master_write(0); + } + } + + matrix->dirty = false; + +done: + i2c_master_stop(); +#if DEBUG_TO_SCREEN + --displaying; +#endif +} + +void iota_gfx_flush(void) { + matrix_render(&display); +} + +static void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +static void render_status_info(void) { +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + struct CharacterMatrix matrix; + + matrix_clear(&matrix); + matrix_write_P(&matrix, PSTR("USB: ")); +#ifdef PROTOCOL_LUFA + switch (USB_DeviceState) { + case DEVICE_STATE_Unattached: + matrix_write_P(&matrix, PSTR("Unattached")); + break; + case DEVICE_STATE_Suspended: + matrix_write_P(&matrix, PSTR("Suspended")); + break; + case DEVICE_STATE_Configured: + matrix_write_P(&matrix, PSTR("Connected")); + break; + case DEVICE_STATE_Powered: + matrix_write_P(&matrix, PSTR("Powered")); + break; + case DEVICE_STATE_Default: + matrix_write_P(&matrix, PSTR("Default")); + break; + case DEVICE_STATE_Addressed: + matrix_write_P(&matrix, PSTR("Addressed")); + break; + default: + matrix_write_P(&matrix, PSTR("Invalid")); + } +#endif + +// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(&matrix, PSTR("\n\nLayer: ")); + switch (layer_state) { + case _BASE: + matrix_write_P(&matrix, PSTR("Default")); + break; + case _RAISE: + matrix_write_P(&matrix, PSTR("Raise")); + break; + case _LOWER: + matrix_write_P(&matrix, PSTR("Lower")); + break; + case _ADJUST: + matrix_write_P(&matrix, PSTR("ADJUST")); + break; + default: + matrix_write(&matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(&matrix, led); + matrix_update(&display, &matrix); +} + +void iota_gfx_task(void) { + render_status_info(); + + if (display.dirty) { + iota_gfx_flush(); + } + + if (timer_elapsed(last_flush) > ScreenOffInterval) { + iota_gfx_off(); + } +} diff --git a/keyboards/planck/keymaps/callum/keymap.c b/keyboards/planck/keymaps/callum/keymap.c index aede27df75..09063cb97f 100644 --- a/keyboards/planck/keymaps/callum/keymap.c +++ b/keyboards/planck/keymaps/callum/keymap.c @@ -48,19 +48,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* MOVE * ,-----------------------------------------------------------------------------------. - * | H(3) | H(F1)| H(F2)| H(F3)| H(F4)| H(F5)| H(8) | Home | Up | End | H(7) | Esc | + * | H(F7)| H(F8)| H(6) | H(5) | H(4) | H(F9)|H(F10)| Home | Up | End | H(A) | Esc | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | H(4) | H(F6)| H(F7)| H(F8)| H(F9)|H(F10)| H(9) | Left | Down | Right| Caps | Del | + * | H(F3)| H(F4)| H(3) | H(2) | H(1) | H(F5)| H(F6)| Left | Down | Right| Caps | Del | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | |H(F11)|H(F12)| H(0) | H(1) | H(2) | H(A) | Pg Dn| Pg Up| H(5) | H(6) | | + * | | H(0) | H(9) | H(8) | H(7) | H(F1)| H(F2)| Pg Dn| Pg Up|H(F11)|H(F12)| | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ [_MOVE] = { - {H(KC_3), H(KC_F1),H(KC_F2),H(KC_F3),H(KC_F4),H(KC_F5),H(KC_8), KC_HOME, KC_UP, KC_END, H(KC_7), KC_ESC }, - {H(KC_4), H(KC_F6),H(KC_F7),H(KC_F8),H(KC_F9),H(KC_F10),H(KC_9),KC_LEFT, KC_DOWN, KC_RGHT, KC_CAPS, KC_DEL }, - {_______, H(KC_F11),H(KC_F12),H(KC_0),H(KC_1),H(KC_2), H(KC_A), KC_PGDN, KC_PGUP, H(KC_5), H(KC_6), _______}, + {H(KC_F7),H(KC_F8),H(KC_6), H(KC_5), H(KC_4), H(KC_F9),H(KC_F10),KC_HOME,KC_UP, KC_END, H(KC_A), KC_ESC }, + {H(KC_F3),H(KC_F4),H(KC_3), H(KC_2), H(KC_1), H(KC_F5),H(KC_F6),KC_LEFT, KC_DOWN, KC_RGHT, KC_CAPS, KC_DEL }, + {_______, H(KC_0), H(KC_9), H(KC_8), H(KC_7), H(KC_F1),H(KC_F2),KC_PGDN,KC_PGUP,H(KC_F11),H(KC_F12),_______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, diff --git a/keyboards/planck/keymaps/dbroqua/config.h b/keyboards/planck/keymaps/dbroqua/config.h new file mode 100644 index 0000000000..4c61581993 --- /dev/null +++ b/keyboards/planck/keymaps/dbroqua/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/default/config.h b/keyboards/planck/keymaps/default/config.h new file mode 100644 index 0000000000..4c61581993 --- /dev/null +++ b/keyboards/planck/keymaps/default/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/experimental/config.h b/keyboards/planck/keymaps/experimental/config.h index cc093bee49..492490ca1c 100644 --- a/keyboards/planck/keymaps/experimental/config.h +++ b/keyboards/planck/keymaps/experimental/config.h @@ -14,4 +14,27 @@ #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + #endif diff --git a/keyboards/planck/keymaps/impossible/config.h b/keyboards/planck/keymaps/impossible/config.h new file mode 100644 index 0000000000..4c61581993 --- /dev/null +++ b/keyboards/planck/keymaps/impossible/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/jeebak/config.h b/keyboards/planck/keymaps/jeebak/config.h new file mode 100644 index 0000000000..4c61581993 --- /dev/null +++ b/keyboards/planck/keymaps/jeebak/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/jhenahan/config.h b/keyboards/planck/keymaps/jhenahan/config.h index cd3adc41cc..1e42b92b9c 100644 --- a/keyboards/planck/keymaps/jhenahan/config.h +++ b/keyboards/planck/keymaps/jhenahan/config.h @@ -6,4 +6,27 @@ #define FORCE_NKRO #define WORKMAN_SOUND COLEMAK_SOUND +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + #endif diff --git a/keyboards/planck/keymaps/khord/Makefile b/keyboards/planck/keymaps/khord/Makefile new file mode 100644 index 0000000000..f0ed9e8dcc --- /dev/null +++ b/keyboards/planck/keymaps/khord/Makefile @@ -0,0 +1,4 @@ +TAP_DANCE_ENABLE = yes +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/lets_split/rev2fliphalf/config.h b/keyboards/planck/keymaps/khord/config.h index 1c45cf136b..008f3a5c2c 100644 --- a/keyboards/lets_split/rev2fliphalf/config.h +++ b/keyboards/planck/keymaps/khord/config.h @@ -22,23 +22,23 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Wootpatoot -#define PRODUCT Lets Split v2 -#define DESCRIPTION A split keyboard for the cheap makers +#define PRODUCT_ID 0x6060 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Planck Keyboard +#define DESCRIPTION A compact ortholinear keyboard /* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 8 -#define MATRIX_COLS 6 +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 -// wiring of each half -#define MATRIX_ROW_PINS { D7, E6, B4, B5 } -//#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } -#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { D0, D5, B5, B6 } +#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } +#define UNUSED_PINS -//#define CATERINA_BOOTLOADER +#define AUDIO_VOICES + +#define BACKLIGHT_PIN B7 /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW @@ -47,7 +47,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define MATRIX_HAS_GHOST /* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 +#define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ #define DEBOUNCING_DELAY 5 @@ -62,12 +62,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) -/* ws2812 RGB LED */ -#define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER -#define RGBLED_NUM 12 // Number of LEDs -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD +/* Tap Dance */ +#define TAPPING_TERM 150 /* * Feature disable options @@ -75,10 +71,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ /* disable debug print */ -// #define NO_DEBUG +//#define NO_DEBUG /* disable print */ -// #define NO_PRINT +//#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER @@ -87,5 +83,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION +#ifdef SUBPROJECT_rev3 + #include "rev3/config.h" +#endif +#ifdef SUBPROJECT_rev4 + #include "rev4/config.h" +#endif -#endif
\ No newline at end of file +#endif diff --git a/keyboards/planck/keymaps/khord/keymap.c b/keyboards/planck/keymaps/khord/keymap.c new file mode 100644 index 0000000000..8001a0986d --- /dev/null +++ b/keyboards/planck/keymaps/khord/keymap.c @@ -0,0 +1,336 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _ADJUST 16 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Tap Dance Declarations +enum { + ESC_CAP = 0, + LFT_HOM, + DWN_PDN, + UPP_PUP, + RGT_END +}; + +// Dylan's additions +#define C_A_DEL LALT(LCTL(KC_DEL)) +#define C_A_INS LALT(LCTL(KC_INS)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + {TD(ESC_CAP), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT)}, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT } +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | END | HOME |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_END, KC_HOME, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |PG DN |PG UP |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGDN, KC_PGUP, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * |TogOut| S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, C_A_INS, C_A_DEL} +} + + +}; + + +qk_tap_dance_action_t tap_dance_actions[] = { + [ESC_CAP] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_CAPS), + [LFT_HOM] = ACTION_TAP_DANCE_DOUBLE(KC_LEFT, KC_HOME), + [DWN_PDN] = ACTION_TAP_DANCE_DOUBLE(KC_DOWN, KC_PGDN), + [UPP_PUP] = ACTION_TAP_DANCE_DOUBLE(KC_UP, KC_PGUP), + [RGT_END] = ACTION_TAP_DANCE_DOUBLE(KC_RGHT, KC_END) +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(SONIC_RING); //plug in +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(ZELDA_PUZZLE); //music mode + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/planck/keymaps/premek/config.h b/keyboards/planck/keymaps/premek/config.h new file mode 100644 index 0000000000..4c61581993 --- /dev/null +++ b/keyboards/planck/keymaps/premek/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/sgoodwin/config.h b/keyboards/planck/keymaps/sgoodwin/config.h new file mode 100644 index 0000000000..4c61581993 --- /dev/null +++ b/keyboards/planck/keymaps/sgoodwin/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/smt/config.h b/keyboards/planck/keymaps/smt/config.h new file mode 100644 index 0000000000..4c61581993 --- /dev/null +++ b/keyboards/planck/keymaps/smt/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/smt/keymap.c b/keyboards/planck/keymaps/smt/keymap.c index 51e5a40bfe..708f699da9 100644 --- a/keyboards/planck/keymaps/smt/keymap.c +++ b/keyboards/planck/keymaps/smt/keymap.c @@ -11,15 +11,17 @@ extern keymap_config_t keymap_config; // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them // entirely and just use numbers. -#define _DVORAK 0 -#define _QWERTY 1 -#define _LOWER 2 -#define _RAISE 3 +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 #define _ADJUST 16 enum planck_keycodes { - DVORAK = SAFE_RANGE, - QWERTY, + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, LOWER, RAISE, BACKLIT @@ -29,60 +31,84 @@ enum planck_keycodes { #define _______ KC_TRNS #define XXXXXXX KC_NO +// Custom macros +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Alt+Shift) +#define MEH_GRV MEH_T(KC_GRV) // Tap for Backtick, hold for Meh (Ctrl+Alt+Shift) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Dvorak +/* Qwerty * ,-----------------------------------------------------------------------------------. - * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | O | E | U | I | D | H | T | N | S | - | + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * | ` | Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ -[_DVORAK] = { - {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, - {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, - {SFT_T(KC_ESC), KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_ENT)}, - {ALL_T(KC_GRV), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +[_QWERTY] = { + {HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, + {MEH_GRV, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, -/* Qwerty +/* Colemak * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * | Esc | A | R | S | T | D | H | N | E | I | O | " | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * | ` | Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ -[_QWERTY] = { - {_______, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, - {_______, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, - {_______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +[_COLEMAK] = { + {HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, + {MEH_GRV, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | - | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT}, + {MEH_GRV, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, /* Lower * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | + * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | F1 | F2 | F3 | F4 | F5 | F6 | 4 | 5 | 6 | Home |PageUp| + * | $ | F1 | F2 | F3 | F4 | F5 | F6 | 4 | 5 | 6 | | | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 | 1 | 2 | 3 | End |PageDn| + * | | F7 | F8 | F9 | F10 | F11 | F12 | 1 | 2 | 3 | | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | Next | Vol- | Vol+ | Play | * `-----------------------------------------------------------------------------------' */ [_LOWER] = { - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, - {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_4, KC_5, KC_6, KC_HOME, KC_PGUP}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_1, KC_2, KC_3, KC_END, KC_PGDN}, - {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {ALL_T(KC_0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {CTL_T(KC_DLR), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_4, KC_5, KC_6, _______, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_1, KC_2, KC_3, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, /* Raise @@ -93,21 +119,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | | | | | | | - | / | = | [ | ] | \ | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | + * | | | | | | | | | Home |PageDn|PageUp| End | * `-----------------------------------------------------------------------------------' */ [_RAISE] = { - {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, - {_______, _______, _______, _______, _______, _______, KC_UNDS, KC_QUES, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, - {_______, _______, _______, _______, _______, _______, KC_MINS, KC_SLSH, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, - {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {ALL_T(KC_TILD), KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {_______, _______, _______, _______, _______, _______, KC_UNDS, KC_QUES, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, _______, _______, _______, _______, _______, KC_MINS, KC_SLSH, KC_EQL, KC_LBRC, KC_RBRC, SFT_T(KC_BSLS)}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END} }, /* Adjust (Lower + Raise) * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | + * | | Reset| | | | | | | | | | Reset| * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Dvorak|Qwerty| | | | + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | * |------+------+------+------+------+------|------+------+------+------+------+------| * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | * |------+------+------+------+------+------+------+------+------+------+------+------| @@ -115,8 +141,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_ADJUST] = { - {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, - {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, DVORAK, QWERTY, _______, _______, _______}, + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} } @@ -128,6 +154,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { float tone_startup[][2] = SONG(STARTUP_SOUND); float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); float tone_dvorak[][2] = SONG(DVORAK_SOUND); float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); @@ -142,21 +169,30 @@ void persistant_default_layer_set(uint16_t default_layer) { bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { - case DVORAK: + case QWERTY: if (record->event.pressed) { #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); #endif - persistant_default_layer_set(1UL<<_DVORAK); + persistant_default_layer_set(1UL<<_QWERTY); } return false; break; - case QWERTY: + case COLEMAK: if (record->event.pressed) { #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + PLAY_NOTE_ARRAY(tone_colemak, false, 0); #endif - persistant_default_layer_set(1UL<<_QWERTY); + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); } return false; break; diff --git a/keyboards/planck/keymaps/smt/readme.md b/keyboards/planck/keymaps/smt/readme.md index 0e955a5742..dc7c9cf9f1 100644 --- a/keyboards/planck/keymaps/smt/readme.md +++ b/keyboards/planck/keymaps/smt/readme.md @@ -4,49 +4,70 @@ This keymap is primarily based on the default Planck keymap. Notable differences from the default are: -1. **Dvorak by default** +- **[Mod-Tap](https://github.com/jackhumbert/qmk_firmware/wiki#fun-with-modifier-keys) keys** - I happen to type in Dvorak, and prefer that layer to be the default on my keyboard. This is easy enough to switch around with Qwerty, Colemak, or whatever. + - `Esc/Ctrl` -2. **Right Shift** + I am experimenting with using Left Shift as a mod-tap key for Escape, similar to how I use the Enter key. It's set up like this on my Minivan, so in the interest of consistency... - I use both the left and right shift keys when I type. When I want to modify a key with shift, I hold shift with the hand opposite the one typing the key. In the default keymap, Enter is where shift would be on a standard keyboard layout. Oh, muscle memory. + - `Enter/Shift` - Thankfully, QMK supports [mod-tap](https://github.com/jackhumbert/qmk_firmware/wiki#fun-with-modifier-keys) keys, and this allows me to set the Enter key to send a modifier (MOD_LSFT) when held, and KC_ENT when tapped. Awesome! + I use both the left and right shift keys when I type. When I want to modify a key with shift, I hold shift with the hand opposite the one typing the key. In the default keymap, Enter is where shift would be on a standard keyboard layout. Oh, muscle memory. -3. Escape + - `Tab/Hyper` (Super+Ctrl+Shift+Alt) - I am experimenting with using Left Shift as a mod-tap key for Escape, similar to how I use the Enter key. It's set up like this on my Minivan, so in the interest of consistency... + It's great to be able to use Tab as a custom modifier key. I tend to use [Hyper](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/) commands for various OS-specific operations depending on what machine I'm working on. -4. Backtick + - `Backtick/Meh` (Ctrl+Shift+Alt) - I don't currently have LEDs on any of my keyboards, and even if I did, I don't think I would want their controls on a base layer. + Why use backtick in the lower left corner? I use it as my tmux prefix key, so I need to type it more frequently than most people. Putting it on the base layer works well for me. The "Meh" mapping is just a less-cool "Hyper"; the same, just without Super. - So, why use backtick in the lower left corner? I use it as my tmux prefix key, so I need to type it more frequently than most people. Putting it on the base layer works well for me. +- **Swapped responsibilities of "lower" and "raise" layers** -## Dvorak (default) + I prefer to use symbols via the "raise" layer, and numbers via the "lower" layer. + +- **Removed Plover layer** + + I don't intend to use stenography anytime soon, so Plover just didn't have a place in my keymap. + + +## Qwerty ``` ,-----------------------------------------------------------------------------------. -| Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | +| Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | |------+------+------+------+------+-------------+------+------+------+------+------| -| Esc | A | O | E | U | I | D | H | T | N | S | - | +| Esc | A | S | D | F | G | H | J | K | L | ; | " | |------+------+------+------+------+------|------+------+------+------+------+------| -| Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | +| Shift| Z | X | C | V | B | N | M | , | . | / |Enter | |------+------+------+------+------+------+------+------+------+------+------+------| -| ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | +| ` | Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | `-----------------------------------------------------------------------------------' ``` -## Qwerty (same as default) +## Colemak ``` ,-----------------------------------------------------------------------------------. -| Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | +| Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | |------+------+------+------+------+-------------+------+------+------+------+------| -| Esc | A | S | D | F | G | H | J | K | L | ; | " | +| Esc | A | R | S | T | D | H | N | E | I | O | " | |------+------+------+------+------+------|------+------+------+------+------+------| -| Shift| Z | X | C | V | B | N | M | , | . | / |Enter | +| Shift| Z | X | C | V | B | K | M | , | . | / |Enter | +|------+------+------+------+------+------+------+------+------+------+------+------| +| ` | Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | +`-----------------------------------------------------------------------------------' +``` + +## Dvorak + +``` +,-----------------------------------------------------------------------------------. +| Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | +|------+------+------+------+------+-------------+------+------+------+------+------| +| Esc | A | O | E | U | I | D | H | T | N | S | - | +|------+------+------+------+------+------|------+------+------+------+------+------| +| Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | |------+------+------+------+------+------+------+------+------+------+------+------| | ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | `-----------------------------------------------------------------------------------' @@ -54,15 +75,15 @@ Notable differences from the default are: ## Lower -This is where I put the number row, a numpad cluster, function keys, and some light navigation via Home/End/PageUp/PageDn. Like the "Raise" layer, the top row is redundant to help with Planck compatibility. +This is where I put the number row, a numpad cluster, function keys, and media controls. ``` ,-----------------------------------------------------------------------------------. -| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | +| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | |------+------+------+------+------+-------------+------+------+------+------+------| -| | F1 | F2 | F3 | F4 | F5 | F6 | 4 | 5 | 6 | Home |PageUp| +| $ | F1 | F2 | F3 | F4 | F5 | F6 | 4 | 5 | 6 | | | |------+------+------+------+------+------|------+------+------+------+------+------| -| | F7 | F8 | F9 | F10 | F11 | F12 | 1 | 2 | 3 | End |PageDn| +| | F7 | F8 | F9 | F10 | F11 | F12 | 1 | 2 | 3 | | | |------+------+------+------+------+------+------+------+------+------+------+------| | | | | | | | | Next | Vol- | Vol+ | Play | `-----------------------------------------------------------------------------------' @@ -70,7 +91,7 @@ This is where I put the number row, a numpad cluster, function keys, and some li ## Raise -As a developer, it makes the most sense for me to group all the commonly-used symbols that don't fit on the main layer. In particular, having the dual-column of parens-braces-brackets really helps a lot. +As a developer, it makes the most sense for me to group all the commonly-used symbols that don't fit on the main layer. In particular, having the dual-column of parens-braces-brackets really helps a lot. I've also added cursorkeys to correspond to the arrows. I haven't completely filled this layer, which leaves room for future mappings and macros. @@ -82,21 +103,21 @@ I haven't completely filled this layer, which leaves room for future mappings an |------+------+------+------+------+------|------+------+------+------+------+------| | | | | | | | - | / | = | [ | ] | \ | |------+------+------+------+------+------+------+------+------+------+------+------| -| | | | | | | | Next | Vol- | Vol+ | Play | +| | | | | | | | | Home |PageDn|PageUp| End | `-----------------------------------------------------------------------------------' ``` ## Adjust (Lower + Raise) -Utility layer. This is where I'd switch to Qwerty, or ~~fool around with~~ adjust the audio/music settings. +Utility layer. This is where I'd switch between Qwerty and Dvorak, ~~fool around with~~ adjust the audio/music settings, or put the Planck into bootloader mode. ``` ,-----------------------------------------------------------------------------------. -| | Reset| | | | | | | | | | Del | +| | Reset| | | | | | | | | | Reset| |------+------+------+------+------+-------------+------+------+------+------+------| -| | | |Aud on|AudOff|AGnorm|AGswap|Dvorak|Qwerty| | | | +| | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | |------+------+------+------+------+------|------+------+------+------+------+------| -| |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff| | | | | | +| |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | |------+------+------+------+------+------+------+------+------+------+------+------| | | | | | | | | | | | | `-----------------------------------------------------------------------------------' diff --git a/keyboards/planck/keymaps/thermal_printer/config.h b/keyboards/planck/keymaps/thermal_printer/config.h index 430b6493cf..bcd0989306 100644 --- a/keyboards/planck/keymaps/thermal_printer/config.h +++ b/keyboards/planck/keymaps/thermal_printer/config.h @@ -20,4 +20,27 @@ sei(); \ } while(0) +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + #endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/unicode/config.h b/keyboards/planck/keymaps/unicode/config.h new file mode 100644 index 0000000000..4c61581993 --- /dev/null +++ b/keyboards/planck/keymaps/unicode/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/xyverz/config.h b/keyboards/planck/keymaps/xyverz/config.h new file mode 100644 index 0000000000..4c61581993 --- /dev/null +++ b/keyboards/planck/keymaps/xyverz/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/zach/Makefile b/keyboards/planck/keymaps/zach/Makefile new file mode 100644 index 0000000000..9d86fc81fc --- /dev/null +++ b/keyboards/planck/keymaps/zach/Makefile @@ -0,0 +1,29 @@ +# Zach Planck Makefile +# Max .hex size is about 28636 bytes + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +TAP_DANCE_ENABLE = yes # Enable TapDance functionality +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +USB_6KRO_ENABLE = no # 6key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +#VARIABLE_TRACE = no # Debug changes to variable values +UNICODE_ENABLE = no # Unicode (can't be used with unicodemap) +UNICODEMAP_ENABLE = yes # Enable extended unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/zach/config.h b/keyboards/planck/keymaps/zach/config.h new file mode 100644 index 0000000000..d309c94935 --- /dev/null +++ b/keyboards/planck/keymaps/zach/config.h @@ -0,0 +1,94 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Planck Keyboard +#define DESCRIPTION A compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { D0, D5, B5, B6 } +#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +//#define BACKLIGHT_BREATHING // LED breathing +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 5 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +#undef LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE +#undef LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG +/* disable print */ +//#define NO_PRINT +#undef NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION +#define PREVENT_STUCK_MODIFIERS +//#define DYNAMIC_MACRO_ENABLE // Enable if you need to use the macro functionality +//#define SPACE_CADET // Parenthesis on L/R shift + +#ifdef SUBPROJECT_rev3 + #include "rev3/config.h" +#endif +#ifdef SUBPROJECT_rev4 + #include "rev4/config.h" +#endif + +#endif diff --git a/keyboards/planck/keymaps/zach/keymap.c b/keyboards/planck/keymaps/zach/keymap.c new file mode 100644 index 0000000000..710477df54 --- /dev/null +++ b/keyboards/planck/keymaps/zach/keymap.c @@ -0,0 +1,48 @@ +// Zach Nielsen Custom Planck Keyboard layout +#include "planck.h" +#define PLANCK_YES // This is the Planck +#include "zach_common_functions.c" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_COLEMAK] = { /* Base Layer */ + {KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, KC_BSPC}, + {KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT}, + {SHFT_CAP,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, + {CTRLB, TD(SUP), KC_LALT, KC_LCTL, TD(LOW), KC_SPC, KC_SPC, TD(RAI), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +[_SWCOLE] = { /* Software Colemak */ + {_______, CM_Q, CM_W, CM_F, CM_P, CM_G, CM_J, CM_L, CM_U, CM_Y, KC_QUOT, _______}, + {_______, CM_A, CM_R, CM_S, CM_T, CM_D, CM_H, CM_N, CM_E, CM_I, CM_O, _______}, + {_______, CM_Z, CM_X, CM_C, CM_V, CM_B, CM_K, CM_M, CM_COMM, CM_DOT, CM_SLSH, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +[_RAISE] = { /* RAISE - Numpad and Unicode symbols */ + {KC_GRV, SUPA2, FACE, DISFACE, SHRUG, PLUMIN, IBANG, KC_7, KC_8, KC_9, KC_COLN, _______}, + {KC_DEL, DEGREE, MICRO, WOMEGA, OMEGA, PENGY, KC_ENT, KC_4, KC_5, KC_6, KC_SLSH, KC_ASTR}, + {_______, KC_COLN, TFLIP, LAROW, RAROW, DUCK, KC_SPC, KC_1, KC_2, KC_3, KC_MINS, KC_PLUS}, + {_______, KC_PIPE, TPUT, _______, _______, KC_TAB, KC_TAB, _______, KC_0, KC_0, KC_DOT, KC_EQL} +}, + +[_LOWER] = { /* LOWER - Symbols, Paging, CtrAltDel */ + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_QUES, KC_DQT, KC_DEL}, + {KC_DEL, KC_LBRC, KC_RBRC, KC_MINS, KC_UNDS, KC_HOME, KC_END, KC_LPRN, KC_RPRN, KC_SLSH, KC_SCLN, KC_PGUP}, + {CPYPST, XXXXXXX, C(KC_X), KC_LABK, KC_RABK, XXXXXXX, XXXXXXX, KC_LCBR, KC_RCBR, KC_BSLS, KC_COLN, KC_PGDN}, + {_______, _______, _______, _______, _______, KC_TAB, KC_TAB, _______, _______, _______, _______, _______} +}, + +[_ADJUST] = { /* ADJUST - Macros, Layer Switching, Function Keys */ + {UNIWIN, XXXXXXX, XXXXXXX, PENGY, DUCK, KC_INS, KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX}, + {UNILIN, XXXXXXX, XXXXXXX, RANDIG, RANDIG, SWCOLE, COLEMAK, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX}, + {_______, CADKEY, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX}, + {_______, _______, _______, _______, _______, RESET, RESET, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +[_UNICODES] = { /* UNICODES - Extra layer for unicode stuff */ + {_______, TFLIP, XXXXXXX, XXXXXXX, IBANG, roman7, XXXXXXX, XXXXXXX, ROMAN7, XXXXXXX, XXXXXXX, _______}, + {KC_DEL, TPUT, FACE, DISFACE, SHRUG, roman4, roman5, roman6, ROMAN4, ROMAN5, ROMAN6, _______}, + {XXXXXXX, XXXXXXX, XXXXXXX, LAROW, RAROW, roman1, roman2, roman3, ROMAN1, ROMAN2, ROMAN3, XXXXXXX}, + {_______, _______, _______, _______, _______, KC_SPC, KC_SPC, _______, _______, _______, _______, _______} +} +}; diff --git a/keyboards/planck/keymaps/zach/zach_common_functions.c b/keyboards/planck/keymaps/zach/zach_common_functions.c new file mode 100644 index 0000000000..2c47b22896 --- /dev/null +++ b/keyboards/planck/keymaps/zach/zach_common_functions.c @@ -0,0 +1,447 @@ +#ifndef ZACH_COMMON_FUNCTIONS +#define ZACH_COMMON_FUNCTIONS +#include "eeconfig.h" +#include "action_layer.h" +#include "keymap_colemak.h" +extern keymap_config_t keymap_config; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define C(n) RCTL(n) +#define CADKEY RCTL(RALT(KC_DEL)) + +void tap(uint16_t keycode){ + register_code(keycode); + unregister_code(keycode); +}; + +void persistant_default_layer_set(uint16_t default_layer){ + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +}; + +// Automatic number generation of important keywords +enum my_keycodes{ + // Layer numbers + _COLEMAK = 0, + _SWCOLE, + _RAISE, + _LOWER, + _ADJUST, + _UNICODES, + // These use process_record_user() + COLEMAK = SAFE_RANGE, + SWCOLE, + LOWER, + RAISE, + SHFT_CAP, + CTRLB, + CPYPST, + FACE, + UNIWIN, + UNILIN, + DISFACE, + TFLIP, + TPUT, + SHRUG, + RANDIG, + // Tap_Dance nums + RAI = 0, + LOW, + SUP +}; + +#ifdef AUDIO_ENABLE +#include "audio.h" +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_swcole[][2] = SONG(QWERTY_SOUND); +float tone_capslock_on[][2] = SONG(CAPS_LOCK_ON_SOUND); +float tone_capslock_off[][2] = SONG(CAPS_LOCK_OFF_SOUND); +float tone_ctrl_mod[][2] = SONG(COIN_SOUND); +float tone_copy[][2] = SONG(SCROLL_LOCK_ON_SOUND); +float tone_paste[][2] = SONG(SCROLL_LOCK_OFF_SOUND); +float uniwin[][2] = SONG(UNICODE_WINDOWS); +float unilin[][2] = SONG(UNICODE_LINUX); +#endif + +#ifdef TAP_DANCE_ENABLE +#define TAPPING_TERM 200 + +void dance_raise_press(qk_tap_dance_state_t *state, void *user_data){// Called on each tap + switch(state->count){ // Only turn the layer on once + case 1: + layer_off(_UNICODES); + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + break; + } +}; +void dance_raise_lift(qk_tap_dance_state_t *state, void *user_data){ // Called on release + switch(state->count){ + case 1: // Normal action. Turn off layers + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + layer_off(_UNICODES); + break; + } +}; +///////////////////////////////////////////////////////////////////// +void dance_lower_press(qk_tap_dance_state_t *state, void *user_data){// Called on tap + switch(state->count){ + case 1: // Turn on lower + layer_off(_UNICODES); + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + break; + } +}; +void dance_lower_lift(qk_tap_dance_state_t *state, void *user_data){ // Called on release + switch(state->count){ + case 1: // Normal action. Turn off layers + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + layer_off(_UNICODES); + break; + case 2: // Turn on _UNICODES layer + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + layer_on(_UNICODES); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_ctrl_mod, false, 0); + #endif + break; + } +}; +///////////////////////////////////////////////////////////////////// +void dance_super_press(qk_tap_dance_state_t *state, void *user_data){ // Called on down + if(state->count == 1){ + register_code(KC_LGUI); + } +} +void dance_super_done(qk_tap_dance_state_t *state, void *user_data){ // Called on timeout + switch(state->count){ + case 2: + register_code(KC_LGUI); + tap(KC_L); + unregister_code(KC_LGUI); + break; + } +} +void dance_super_lift(qk_tap_dance_state_t *state, void *user_data){ // Called on up + unregister_code(KC_LGUI); +} + +qk_tap_dance_action_t tap_dance_actions[] = { + [RAI] = ACTION_TAP_DANCE_FN_ADVANCED(dance_raise_press, NULL, dance_raise_lift), + [LOW] = ACTION_TAP_DANCE_FN_ADVANCED(dance_lower_press, NULL, dance_lower_lift), + [SUP] = ACTION_TAP_DANCE_FN_ADVANCED(dance_super_press, dance_super_done, dance_super_lift) +}; +#endif + +//#ifdef UNICODE_ENABLE +// Unicode shortcuts +#define IBANG X(0x203D) +#define RAROW X(0x2192) +#define LAROW X(0x2190) +#define DEGREE X(0x00B0) +#define OMEGA X(0x03A9) +#define WOMEGA X(0x03C9) +#define MICRO X(0x00B5) +#define PLUMIN X(0x00B1) +#define SUPA2 X(0x00B2) +#define ROMAN1 X(0x2160) +#define ROMAN2 X(0x2161) +#define ROMAN3 X(0x2162) +#define ROMAN4 X(0x2163) +#define ROMAN5 X(0x2164) +#define ROMAN6 X(0x2165) +#define ROMAN7 X(0x2166) +#define roman1 X(0x2170) +#define roman2 X(0x2171) +#define roman3 X(0x2172) +#define roman4 X(0x2173) +#define roman5 X(0x2174) +#define roman6 X(0x2175) +#define roman7 X(0x2176) + +#ifdef UNICODEMAP_ENABLE // For Unicode characters larger than 0x8000. Send with X(<unicode>) +enum Ext_Unicode{ + PENGUIN = 0, + BOAR, + MONKEY, + DRAGON, + CHICK, + TUMBLER +}; +const uint32_t PROGMEM unicode_map[] = { + [PENGUIN] = 0x1F427, + [BOAR] = 0x1F417, + [MONKEY] = 0x1F412, + [DRAGON] = 0x1F409, + [CHICK] = 0x1F425, + [TUMBLER] = 0x1F943 +}; +#define PENGY X(PENGUIN) +#define BOARY X(BOAR) +#define MNKY X(MONKEY) +#define DRGN X(DRAGON) +#define DUCK X(CHICK) +#define TMBL X(TUMBLER) +#endif + +//#endif + +static uint16_t key_timer; +static uint8_t caps_status = 0; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case COLEMAK: + if(record->event.pressed){ + persistant_default_layer_set(1UL<<_COLEMAK); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + } + return false; + break; + case SWCOLE: + if(record->event.pressed){ + persistant_default_layer_set(1UL<<_SWCOLE); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_swcole, false, 0); + #endif + } + return false; + break; + case RAISE: + if(record->event.pressed){ + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case LOWER: + if(record->event.pressed){ + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case SHFT_CAP: + if(record->event.pressed){ + key_timer = timer_read(); // if the key is being pressed, we start the timer. + register_code(KC_LSHIFT); + } else { // this means the key was just released (tap or "held down") + if(timer_elapsed(key_timer) < 152){ // Time in ms, the threshold we pick for counting something as a tap. + tap(KC_CAPS); + if(caps_status == 0){ + caps_status = 1; + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_capslock_on, false, 0); + #endif + } else { + caps_status = 0; + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_capslock_off, false, 0); + #endif + } + } + unregister_code(KC_LSHIFT); + } + return false; + break; + case CTRLB: // Control-B on tap (bold) + if(record->event.pressed){ + key_timer = timer_read(); // if the key is being pressed, we start the timer. + register_code(KC_LCTL); + } else { // this means the key was just released (tap or "held down") + if (timer_elapsed(key_timer) < 152) { // Time in ms, the threshold we pick for counting something as a tap. + tap(KC_B); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_ctrl_mod, false, 0); + #endif + #ifdef BACKLIGHT_BREATHING + breathing_speed_set(2); + breathing_pulse(); + #endif + } + unregister_code(KC_LCTL); + } + return false; + break; + case CPYPST: // One key copy/paste + if(record->event.pressed){ + key_timer = timer_read(); + } else { + if (timer_elapsed(key_timer) > 152) { // Hold, copy + register_code(KC_LCTL); + tap(KC_C); + unregister_code(KC_LCTL); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_copy, false, 0); + #endif + } else { // Tap, paste + register_code(KC_LCTL); + tap(KC_V); + unregister_code(KC_LCTL); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_paste, false, 0); + #endif + } + } + return false; + break; + #ifdef UNICODE_ENABLE + case UNIWIN: + if(record->event.pressed){ + set_unicode_input_mode(UC_WIN); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(uniwin, false, 0); + #endif + } + return false; + break; + case UNILIN: + if(record->event.pressed){ + set_unicode_input_mode(UC_LNX); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(unilin, false, 0); + #endif + } + return false; + break; + case DISFACE: // ಠ_ಠ + if(record->event.pressed){ + process_unicode((0x0CA0|QK_UNICODE), record); // Eye + register_code(KC_RSFT); + tap(KC_MINS); + unregister_code(KC_RSFT); + process_unicode((0x0CA0|QK_UNICODE), record); // Eye + } + return false; + break; + case TFLIP: // (╯°□°)╯ ︵ ┻━┻ + if(record->event.pressed){ + register_code(KC_RSFT); + tap(KC_9); + unregister_code(KC_RSFT); + process_unicode((0x256F|QK_UNICODE), record); // Arm + process_unicode((0x00B0|QK_UNICODE), record); // Eye + process_unicode((0x25A1|QK_UNICODE), record); // Mouth + process_unicode((0x00B0|QK_UNICODE), record); // Eye + register_code(KC_RSFT); + tap(KC_0); + unregister_code(KC_RSFT); + process_unicode((0x256F|QK_UNICODE), record); // Arm + tap(KC_SPC); + process_unicode((0x0361|QK_UNICODE), record); // Flippy + tap(KC_SPC); + process_unicode((0x253B|QK_UNICODE), record); // Table + process_unicode((0x2501|QK_UNICODE), record); // Table + process_unicode((0x253B|QK_UNICODE), record); // Table + } + return false; + break; + case TPUT: // ┬──┬ ノ( ゜-゜ノ) + if(record->event.pressed){ + process_unicode((0x252C|QK_UNICODE), record); // Table + process_unicode((0x2500|QK_UNICODE), record); // Table + process_unicode((0x2500|QK_UNICODE), record); // Table + process_unicode((0x252C|QK_UNICODE), record); // Table + tap(KC_SPC); + process_unicode((0x30CE|QK_UNICODE), record); // Arm + register_code(KC_RSFT); + tap(KC_9); + unregister_code(KC_RSFT); + tap(KC_SPC); + process_unicode((0x309C|QK_UNICODE), record); // Eye + tap(KC_MINS); + process_unicode((0x309C|QK_UNICODE), record); // Eye + process_unicode((0x30CE|QK_UNICODE), record); // Arm + register_code(KC_RSFT); + tap(KC_0); + unregister_code(KC_RSFT); + } + return false; + break; + case SHRUG: // ¯\_(ツ)_/¯ + if(record->event.pressed){ + process_unicode((0x00AF|QK_UNICODE), record); // Hand + tap(KC_BSLS); // Arm + register_code(KC_RSFT); + tap(KC_UNDS); // Arm + tap(KC_LPRN); // Head + unregister_code(KC_RSFT); + process_unicode((0x30C4|QK_UNICODE), record); // Face + register_code(KC_RSFT); + tap(KC_RPRN); // Head + tap(KC_UNDS); // Arm + unregister_code(KC_RSFT); + tap(KC_SLSH); // Arm + process_unicode((0x00AF|QK_UNICODE), record); // Hand + } + return false; + break; + #endif + case FACE: // (o_O) + if(record->event.pressed){ + register_code(KC_RSFT); + tap(KC_LPRN); + unregister_code(KC_RSFT); + tap(KC_O); + register_code(KC_RSFT); + tap(KC_UNDS); + tap(KC_O); + tap(KC_RPRN); + unregister_code(KC_RSFT); + } + return false; + break; + case RANDIG: + if (record->event.pressed) { + tap_random_base64(); + } + return false; + break; + } + return true; +}; + +void matrix_init_user(void){ // Run once at startup + #ifdef AUDIO_ENABLE + _delay_ms(50); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); + #endif +} + +#ifdef AUDIO_ENABLE +void play_goodbye_tone(void){ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); +} + +void shutdown_user(){ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void){ // Run when the music layer is turned on + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void music_off_user(void){ // Run when music is turned off + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); +} +#endif + +#endif diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk index 4423d422f6..6776062f6d 100644 --- a/keyboards/planck/rules.mk +++ b/keyboards/planck/rules.mk @@ -56,13 +56,13 @@ EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= no # Console for debug(+400) COMMAND_ENABLE ?= no # Commands for debug and configuration NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality MIDI_ENABLE ?= yes # MIDI controls AUDIO_ENABLE ?= yes # Audio output on port C6 UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. -API_SYSEX_ENABLE = yes +API_SYSEX_ENABLE = no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend diff --git a/keyboards/preonic/keymaps/CMD-Preonic/config.h b/keyboards/preonic/keymaps/CMD-Preonic/config.h new file mode 100644 index 0000000000..4c61581993 --- /dev/null +++ b/keyboards/preonic/keymaps/CMD-Preonic/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/preonic/keymaps/default/config.h b/keyboards/preonic/keymaps/default/config.h new file mode 100644 index 0000000000..4c61581993 --- /dev/null +++ b/keyboards/preonic/keymaps/default/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/preonic/keymaps/smt/config.h b/keyboards/preonic/keymaps/smt/config.h new file mode 100644 index 0000000000..4c61581993 --- /dev/null +++ b/keyboards/preonic/keymaps/smt/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/preonic/keymaps/smt/keymap.c b/keyboards/preonic/keymaps/smt/keymap.c index ba05d9ad53..a10deb7500 100644 --- a/keyboards/preonic/keymaps/smt/keymap.c +++ b/keyboards/preonic/keymaps/smt/keymap.c @@ -9,15 +9,17 @@ // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them // entirely and just use numbers. -#define _DVORAK 0 -#define _QWERTY 1 -#define _LOWER 2 -#define _RAISE 3 +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 #define _ADJUST 16 enum preonic_keycodes { - DVORAK = SAFE_RANGE, - QWERTY, + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, LOWER, RAISE, BACKLIT @@ -27,69 +29,96 @@ enum preonic_keycodes { #define _______ KC_TRNS #define XXXXXXX KC_NO +// Custom macros +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Alt+Shift) +#define MEH_GRV MEH_T(KC_GRV) // Tap for Backtick, hold for Meh (Ctrl+Alt+Shift) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Dvorak +/* Qwerty * ,-----------------------------------------------------------------------------------. * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | O | E | U | I | D | H | T | N | S | - | + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * | ` | Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ -[_DVORAK] = { - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, - {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, - {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, - {SFT_T(KC_ESC), KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_ENT)}, - {ALL_T(KC_GRV), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +[_QWERTY] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, + {MEH_GRV, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, -/* Qwerty +/* Colemak * ,-----------------------------------------------------------------------------------. * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * | Esc | A | R | S | T | D | H | N | E | I | O | " | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * | ` | Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ -[_QWERTY] = { - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - {_______, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, _______}, - {_______, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, - {_______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +[_COLEMAK] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, + {MEH_GRV, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | - | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT}, + {MEH_GRV, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, /* Lower * ,-----------------------------------------------------------------------------------. * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | + * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | F1 | F2 | F3 | F4 | F5 | F6 | 4 | 5 | 6 | Home |PageUp| + * | $ | F1 | F2 | F3 | F4 | F5 | F6 | 4 | 5 | 6 | | | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 | 1 | 2 | 3 | End |PageDn| + * | | F7 | F8 | F9 | F10 | F11 | F12 | 1 | 2 | 3 | | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | Next | Vol- | Vol+ | Play | * `-----------------------------------------------------------------------------------' */ [_LOWER] = { - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, - {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_4, KC_5, KC_6, KC_HOME, KC_PGUP}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_1, KC_2, KC_3, KC_END, KC_PGDN}, - {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {ALL_T(KC_GRV), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {ALL_T(KC_0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {CTL_T(KC_DLR), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_4, KC_5, KC_6, _______, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_1, KC_2, KC_3, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, /* Raise @@ -102,24 +131,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | | | | | | | - | / | = | [ | ] | \ | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | + * | | | | | | | | | Home |PageDn|PageUp| End | * `-----------------------------------------------------------------------------------' */ [_RAISE] = { - {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, - {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, - {_______, _______, _______, _______, _______, _______, KC_UNDS, KC_QUES, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, - {_______, _______, _______, _______, _______, _______, KC_MINS, KC_SLSH, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, - {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {ALL_T(KC_TILD), KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {ALL_T(KC_TILD), KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {_______, _______, _______, _______, _______, _______, KC_UNDS, KC_QUES, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, _______, _______, _______, _______, _______, KC_MINS, KC_SLSH, KC_EQL, KC_LBRC, KC_RBRC, SFT_T(KC_BSLS)}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END} }, /* Adjust (Lower + Raise) * ,-----------------------------------------------------------------------------------. * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | Reset| | | | | | | | | | Del | + * | | Reset| | | | | | | | | | Reset| * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|AudOff|AGnorm|AGswap|Dvorak|Qwerty| | | | + * | | | |Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | * |------+------+------+------+------+------|------+------+------+------+------+------| * | |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff| | | | | | * |------+------+------+------+------+------+------+------+------+------+------+------| @@ -128,8 +157,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_ADJUST] = { {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, - {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, - {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, DVORAK, QWERTY, _______, _______, _______}, + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} } @@ -145,8 +174,9 @@ float tone_startup[][2] = { {NOTE_B6, 8} }; -float tone_dvorak[][2] = SONG(DVORAK_SOUND); float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); float tone_goodbye[][2] = SONG(GOODBYE_SOUND); @@ -160,21 +190,30 @@ void persistant_default_layer_set(uint16_t default_layer) { bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { - case DVORAK: + case QWERTY: if (record->event.pressed) { #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); #endif - persistant_default_layer_set(1UL<<_DVORAK); + persistant_default_layer_set(1UL<<_QWERTY); } return false; break; - case QWERTY: + case COLEMAK: if (record->event.pressed) { #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + PLAY_NOTE_ARRAY(tone_colemak, false, 0); #endif - persistant_default_layer_set(1UL<<_QWERTY); + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); } return false; break; diff --git a/keyboards/preonic/keymaps/smt/readme.md b/keyboards/preonic/keymaps/smt/readme.md index 016da7b01f..2ec2603f3e 100644 --- a/keyboards/preonic/keymaps/smt/readme.md +++ b/keyboards/preonic/keymaps/smt/readme.md @@ -4,53 +4,76 @@ This keymap is primarily based on the default Preonic keymap, which in turn is d Notable differences from the default are: -1. **Dvorak by default** +- **[Mod-Tap](https://github.com/jackhumbert/qmk_firmware/wiki#fun-with-modifier-keys) keys** - I happen to type in Dvorak, and prefer that layer to be the default on my keyboard. This is easy enough to switch around with Qwerty, Colemak, or whatever. + - `Esc/Ctrl` -2. **Right Shift** + I am experimenting with using Left Shift as a mod-tap key for Escape, similar to how I use the Enter key. It's set up like this on my Minivan, so in the interest of consistency... - I use both the left and right shift keys when I type. When I want to modify a key with shift, I hold shift with the hand opposite the one typing the key. In the default keymap, Enter is where shift would be on a standard keyboard layout. Oh, muscle memory. + - `Enter/Shift` - Thankfully, QMK supports [mod-tap](https://github.com/jackhumbert/qmk_firmware/wiki#fun-with-modifier-keys) keys, and this allows me to set the Enter key to send a modifier (MOD_LSFT) when held, and KC_ENT when tapped. Awesome! + I use both the left and right shift keys when I type. When I want to modify a key with shift, I hold shift with the hand opposite the one typing the key. In the default keymap, Enter is where shift would be on a standard keyboard layout. Oh, muscle memory. -3. Escape + - `Tab/Hyper` (Super+Ctrl+Shift+Alt) - I am experimenting with using Left Shift as a mod-tap key for Escape, similar to how I use the Enter key. It's set up like this on my Minivan, so in the interest of consistency... + It's great to be able to use Tab as a custom modifier key. I tend to use [Hyper](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/) commands for various OS-specific operations depending on what machine I'm working on. -4. Backtick + - `Backtick/Meh` (Ctrl+Shift+Alt) - I don't currently have LEDs on any of my keyboards, and even if I did, I don't think I would want their controls on a base layer. + Why use backtick in the lower left corner? I use it as my tmux prefix key, so I need to type it more frequently than most people. Putting it on the base layer works well for me. The "Meh" mapping is just a less-cool "Hyper"; the same, just without Super. - So, why use backtick in the lower left corner? I use it as my tmux prefix key, so I need to type it more frequently than most people. Putting it on the base layer works well for me. +- **Swapped responsibilities of "lower" and "raise" layers** -## Dvorak (default) + I prefer to use symbols via the "raise" layer, and numbers via the "lower" layer. + +- **Removed Plover layer** + + I don't intend to use stenography anytime soon, so Plover just didn't have a place in my keymap. + + +## Qwerty ``` ,-----------------------------------------------------------------------------------. | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | |------+------+------+------+------+------+------+------+------+------+------+------| -| Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | +| Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | |------+------+------+------+------+-------------+------+------+------+------+------| -| Esc | A | O | E | U | I | D | H | T | N | S | - | +| Esc | A | S | D | F | G | H | J | K | L | ; | " | |------+------+------+------+------+------|------+------+------+------+------+------| -| Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | +| Shift| Z | X | C | V | B | N | M | , | . | / |Enter | |------+------+------+------+------+------+------+------+------+------+------+------| | ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | `-----------------------------------------------------------------------------------' ``` -## Qwerty (same as default) +## Colemak ``` ,-----------------------------------------------------------------------------------. | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | |------+------+------+------+------+------+------+------+------+------+------+------| -| Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | +| Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | |------+------+------+------+------+-------------+------+------+------+------+------| -| Esc | A | S | D | F | G | H | J | K | L | ; | " | +| Esc | A | R | S | T | D | H | N | E | I | O | " | |------+------+------+------+------+------|------+------+------+------+------+------| -| Shift| Z | X | C | V | B | N | M | , | . | / |Enter | +| Shift| Z | X | C | V | B | K | M | , | . | / |Enter | +|------+------+------+------+------+------+------+------+------+------+------+------| +| ` | Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | +`-----------------------------------------------------------------------------------' +``` + +## Dvorak + +``` +,-----------------------------------------------------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | +|------+------+------+------+------+-------------+------+------+------+------+------| +| Esc | A | O | E | U | I | D | H | T | N | S | - | +|------+------+------+------+------+------|------+------+------+------+------+------| +| Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | |------+------+------+------+------+------+------+------+------+------+------+------| | ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | `-----------------------------------------------------------------------------------' @@ -58,17 +81,17 @@ Notable differences from the default are: ## Lower -This is where I put the number row, a numpad cluster, function keys, and some light navigation via Home/End/PageUp/PageDn. Like the "Raise" layer, the top row is redundant to help with Planck compatibility. +This is where I put the number row, a numpad cluster, function keys, and media controls. Like the "Raise" layer, the top row is redundant to help with Planck compatibility. ``` ,-----------------------------------------------------------------------------------. | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | |------+------+------+------+------+------+------+------+------+------+------+------| -| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | +| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | |------+------+------+------+------+-------------+------+------+------+------+------| -| | F1 | F2 | F3 | F4 | F5 | F6 | 4 | 5 | 6 | Home |PageUp| +| $ | F1 | F2 | F3 | F4 | F5 | F6 | 4 | 5 | 6 | | | |------+------+------+------+------+------|------+------+------+------+------+------| -| | F7 | F8 | F9 | F10 | F11 | F12 | 1 | 2 | 3 | End |PageDn| +| | F7 | F8 | F9 | F10 | F11 | F12 | 1 | 2 | 3 | | | |------+------+------+------+------+------+------+------+------+------+------+------| | | | | | | | | Next | Vol- | Vol+ | Play | `-----------------------------------------------------------------------------------' @@ -76,7 +99,7 @@ This is where I put the number row, a numpad cluster, function keys, and some li ## Raise -As a developer, it makes the most sense for me to group all the commonly-used symbols that don't fit on the main layer. In particular, having the dual-column of parens-braces-brackets really helps a lot. +As a developer, it makes the most sense for me to group all the commonly-used symbols that don't fit on the main layer. In particular, having the dual-column of parens-braces-brackets really helps a lot. I've also added cursorkeys to correspond to the arrows. I haven't completely filled this layer, which leaves room for future mappings and macros. @@ -90,21 +113,21 @@ I haven't completely filled this layer, which leaves room for future mappings an |------+------+------+------+------+------|------+------+------+------+------+------| | | | | | | | - | / | = | [ | ] | \ | |------+------+------+------+------+------+------+------+------+------+------+------| -| | | | | | | | Next | Vol- | Vol+ | Play | +| | | | | | | | | Home |PageDn|PageUp| End | `-----------------------------------------------------------------------------------' ``` ## Adjust (Lower + Raise) -Utility layer. This is where I'd switch to Qwerty, or ~~fool around with~~ adjust the audio/music settings. +Utility layer. This is where I'd switch between Qwerty and Dvorak, ~~fool around with~~ adjust the audio/music settings, or put the Preonic into bootloader mode. ``` ,-----------------------------------------------------------------------------------. | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | |------+------+------+------+------+------+------+------+------+------+------+------| -| | Reset| | | | | | | | | | Del | +| | Reset| | | | | | | | | | Reset| |------+------+------+------+------+-------------+------+------+------+------+------| -| | | |Aud on|AudOff|AGnorm|AGswap|Dvorak|Qwerty| | | | +| | | |Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | |------+------+------+------+------+------|------+------+------+------+------+------| | |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff| | | | | | |------+------+------+------+------+------+------+------+------+------+------+------| diff --git a/keyboards/preonic/keymaps/zach/Makefile b/keyboards/preonic/keymaps/zach/Makefile new file mode 100644 index 0000000000..eebf413495 --- /dev/null +++ b/keyboards/preonic/keymaps/zach/Makefile @@ -0,0 +1,29 @@ +# Zach Preonic Makefile +# Max .hex size is about 28636 bytes + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +TAP_DANCE_ENABLE = yes # Enable TapDance functionality +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +USB_6KRO_ENABLE = no # 6key Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +#VARIABLE_TRACE = no # Debug changes to variable values +UNICODE_ENABLE = no # Unicode +UNICODEMAP_ENABLE = yes # Enable extended unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/preonic/keymaps/zach/config.h b/keyboards/preonic/keymaps/zach/config.h new file mode 100644 index 0000000000..bb8913c7af --- /dev/null +++ b/keyboards/preonic/keymaps/zach/config.h @@ -0,0 +1,95 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6061 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT The Preonic Keyboard +#define DESCRIPTION A compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 12 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { D2, D5, B5, B6, D3 } +#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + + +#define BACKLIGHT_BREATHING // LED breathing +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 5 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +//#define RGB_DI_PIN D1 +//#define RGBLIGHT_TIMER +//#define RGBLED_NUM 28 // Number of LEDs +//#define RGBLIGHT_HUE_STEP 10 +//#define RGBLIGHT_SAT_STEP 17 +//#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION +#define PREVENT_STUCK_MODIFIERS +//#define DYNAMIC_MACRO_ENABLE // Enable if you need to use the macro functionality +//#define SPACE_CADET // Parenthesis on L/R shift + + +#endif diff --git a/keyboards/preonic/keymaps/zach/keymap.c b/keyboards/preonic/keymaps/zach/keymap.c new file mode 100644 index 0000000000..6ce37840b9 --- /dev/null +++ b/keyboards/preonic/keymaps/zach/keymap.c @@ -0,0 +1,54 @@ +// Zach Nielsen Custom Preonic Keyboard layout +#include "preonic.h" +#define PREONIC_YES // This is the Preonic +#include "zach_common_functions.c" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_COLEMAK] = { /* Base Layer */ + {KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, KC_ENT}, + {KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT}, + {SHFT_CAP, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, + {CTRLB, TD(SUP), KC_LALT, KC_LCTL, TD(LOW), KC_SPC, KC_SPC, TD(RAI), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +[_SWCOLE] = { /* Software Colemak */ + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, CM_Q, CM_W, CM_F, CM_P, CM_G, CM_J, CM_L, CM_U, CM_Y, KC_QUOT, _______}, + {_______, CM_A, CM_R, CM_S, CM_T, CM_D, CM_H, CM_N, CM_E, CM_I, CM_O, _______}, + {_______, CM_Z, CM_X, CM_C, CM_V, CM_B, CM_K, CM_M, CM_COMM, CM_DOT, CM_SLSH, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +[_RAISE] = { /* RAISE - Numpad and Unicode symbols */ + {KC_TILD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {KC_GRV, SUPA2, FACE, DISFACE, SHRUG, PLUMIN, IBANG, KC_7, KC_8, KC_9, KC_COLN, _______}, + {KC_DEL, DEGREE, MICRO, WOMEGA, OMEGA, XXXXXXX, KC_ENT, KC_4, KC_5, KC_6, KC_SLSH, KC_ASTR}, + {_______, KC_COLN, TFLIP, LAROW, RAROW, XXXXXXX, KC_SPC, KC_1, KC_2, KC_3, KC_MINS, KC_PLUS}, + {_______, KC_PIPE, TPUT, _______, _______, KC_TAB, KC_TAB, _______, KC_0, KC_0, KC_DOT, KC_EQL} +}, + +[_LOWER] = { /* LOWER - Symbols, Paging, CtrAltDel */ + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_QUES, KC_DQT, KC_DEL}, + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_QUES, KC_DQT, KC_DEL}, + {KC_DEL, KC_LBRC, KC_RBRC, KC_MINS, KC_UNDS, KC_HOME, KC_END, KC_LPRN, KC_RPRN, KC_SLSH, KC_SCLN, KC_PGUP}, + {CPYPST, XXXXXXX, C(KC_X), KC_LABK, KC_RABK, XXXXXXX, XXXXXXX, KC_LCBR, KC_RCBR, KC_BSLS, KC_COLN, KC_PGDN}, + {_______, _______, _______, _______, _______, KC_TAB, KC_TAB, _______, _______, _______, _______, _______} +}, + +[_ADJUST] = { /* ADJUST - Macros, Layer Switching, Function Keys */ + {UNIWIN, XXXXXXX, XXXXXXX, RANDIG, RANDIG, KC_INS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, AU_TOG, MU_TOG}, + {UNILIN, SUPA2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX}, + {XXXXXXX, DEGREE, IBANG, LAROW, RAROW, SWCOLE, COLEMAK, KC_F5, KC_F6, KC_F7, KC_F8, BL_INC}, + {_______, CADKEY, MICRO, WOMEGA, OMEGA, XXXXXXX, XXXXXXX, KC_F9, KC_F10, KC_F11, KC_F12, BL_DEC}, + {_______, _______, _______, _______, _______, RESET, RESET, _______, XXXXXXX, MUV_DE, MUV_IN, BL_TOGG} +}, + +[_UNICODES] = { /* UNICODES - Extra layer for unicode stuff */ + {_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______}, + {_______, TFLIP, XXXXXXX, XXXXXXX, IBANG, roman7, XXXXXXX, XXXXXXX, ROMAN7, XXXXXXX, XXXXXXX, _______}, + {KC_DEL, TPUT, FACE, DISFACE, SHRUG, roman4, roman5, roman6, ROMAN4, ROMAN5, ROMAN6, _______}, + {XXXXXXX, XXXXXXX, XXXXXXX, LAROW, RAROW, roman1, roman2, roman3, ROMAN1, ROMAN2, ROMAN3, XXXXXXX}, + {_______, _______, _______, _______, _______, KC_SPC, KC_SPC, _______, _______, _______, _______, _______} +} +}; diff --git a/keyboards/preonic/keymaps/zach/zach_common_functions.c b/keyboards/preonic/keymaps/zach/zach_common_functions.c new file mode 100644 index 0000000000..2c47b22896 --- /dev/null +++ b/keyboards/preonic/keymaps/zach/zach_common_functions.c @@ -0,0 +1,447 @@ +#ifndef ZACH_COMMON_FUNCTIONS +#define ZACH_COMMON_FUNCTIONS +#include "eeconfig.h" +#include "action_layer.h" +#include "keymap_colemak.h" +extern keymap_config_t keymap_config; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define C(n) RCTL(n) +#define CADKEY RCTL(RALT(KC_DEL)) + +void tap(uint16_t keycode){ + register_code(keycode); + unregister_code(keycode); +}; + +void persistant_default_layer_set(uint16_t default_layer){ + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +}; + +// Automatic number generation of important keywords +enum my_keycodes{ + // Layer numbers + _COLEMAK = 0, + _SWCOLE, + _RAISE, + _LOWER, + _ADJUST, + _UNICODES, + // These use process_record_user() + COLEMAK = SAFE_RANGE, + SWCOLE, + LOWER, + RAISE, + SHFT_CAP, + CTRLB, + CPYPST, + FACE, + UNIWIN, + UNILIN, + DISFACE, + TFLIP, + TPUT, + SHRUG, + RANDIG, + // Tap_Dance nums + RAI = 0, + LOW, + SUP +}; + +#ifdef AUDIO_ENABLE +#include "audio.h" +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_swcole[][2] = SONG(QWERTY_SOUND); +float tone_capslock_on[][2] = SONG(CAPS_LOCK_ON_SOUND); +float tone_capslock_off[][2] = SONG(CAPS_LOCK_OFF_SOUND); +float tone_ctrl_mod[][2] = SONG(COIN_SOUND); +float tone_copy[][2] = SONG(SCROLL_LOCK_ON_SOUND); +float tone_paste[][2] = SONG(SCROLL_LOCK_OFF_SOUND); +float uniwin[][2] = SONG(UNICODE_WINDOWS); +float unilin[][2] = SONG(UNICODE_LINUX); +#endif + +#ifdef TAP_DANCE_ENABLE +#define TAPPING_TERM 200 + +void dance_raise_press(qk_tap_dance_state_t *state, void *user_data){// Called on each tap + switch(state->count){ // Only turn the layer on once + case 1: + layer_off(_UNICODES); + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + break; + } +}; +void dance_raise_lift(qk_tap_dance_state_t *state, void *user_data){ // Called on release + switch(state->count){ + case 1: // Normal action. Turn off layers + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + layer_off(_UNICODES); + break; + } +}; +///////////////////////////////////////////////////////////////////// +void dance_lower_press(qk_tap_dance_state_t *state, void *user_data){// Called on tap + switch(state->count){ + case 1: // Turn on lower + layer_off(_UNICODES); + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + break; + } +}; +void dance_lower_lift(qk_tap_dance_state_t *state, void *user_data){ // Called on release + switch(state->count){ + case 1: // Normal action. Turn off layers + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + layer_off(_UNICODES); + break; + case 2: // Turn on _UNICODES layer + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + layer_on(_UNICODES); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_ctrl_mod, false, 0); + #endif + break; + } +}; +///////////////////////////////////////////////////////////////////// +void dance_super_press(qk_tap_dance_state_t *state, void *user_data){ // Called on down + if(state->count == 1){ + register_code(KC_LGUI); + } +} +void dance_super_done(qk_tap_dance_state_t *state, void *user_data){ // Called on timeout + switch(state->count){ + case 2: + register_code(KC_LGUI); + tap(KC_L); + unregister_code(KC_LGUI); + break; + } +} +void dance_super_lift(qk_tap_dance_state_t *state, void *user_data){ // Called on up + unregister_code(KC_LGUI); +} + +qk_tap_dance_action_t tap_dance_actions[] = { + [RAI] = ACTION_TAP_DANCE_FN_ADVANCED(dance_raise_press, NULL, dance_raise_lift), + [LOW] = ACTION_TAP_DANCE_FN_ADVANCED(dance_lower_press, NULL, dance_lower_lift), + [SUP] = ACTION_TAP_DANCE_FN_ADVANCED(dance_super_press, dance_super_done, dance_super_lift) +}; +#endif + +//#ifdef UNICODE_ENABLE +// Unicode shortcuts +#define IBANG X(0x203D) +#define RAROW X(0x2192) +#define LAROW X(0x2190) +#define DEGREE X(0x00B0) +#define OMEGA X(0x03A9) +#define WOMEGA X(0x03C9) +#define MICRO X(0x00B5) +#define PLUMIN X(0x00B1) +#define SUPA2 X(0x00B2) +#define ROMAN1 X(0x2160) +#define ROMAN2 X(0x2161) +#define ROMAN3 X(0x2162) +#define ROMAN4 X(0x2163) +#define ROMAN5 X(0x2164) +#define ROMAN6 X(0x2165) +#define ROMAN7 X(0x2166) +#define roman1 X(0x2170) +#define roman2 X(0x2171) +#define roman3 X(0x2172) +#define roman4 X(0x2173) +#define roman5 X(0x2174) +#define roman6 X(0x2175) +#define roman7 X(0x2176) + +#ifdef UNICODEMAP_ENABLE // For Unicode characters larger than 0x8000. Send with X(<unicode>) +enum Ext_Unicode{ + PENGUIN = 0, + BOAR, + MONKEY, + DRAGON, + CHICK, + TUMBLER +}; +const uint32_t PROGMEM unicode_map[] = { + [PENGUIN] = 0x1F427, + [BOAR] = 0x1F417, + [MONKEY] = 0x1F412, + [DRAGON] = 0x1F409, + [CHICK] = 0x1F425, + [TUMBLER] = 0x1F943 +}; +#define PENGY X(PENGUIN) +#define BOARY X(BOAR) +#define MNKY X(MONKEY) +#define DRGN X(DRAGON) +#define DUCK X(CHICK) +#define TMBL X(TUMBLER) +#endif + +//#endif + +static uint16_t key_timer; +static uint8_t caps_status = 0; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case COLEMAK: + if(record->event.pressed){ + persistant_default_layer_set(1UL<<_COLEMAK); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + } + return false; + break; + case SWCOLE: + if(record->event.pressed){ + persistant_default_layer_set(1UL<<_SWCOLE); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_swcole, false, 0); + #endif + } + return false; + break; + case RAISE: + if(record->event.pressed){ + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case LOWER: + if(record->event.pressed){ + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case SHFT_CAP: + if(record->event.pressed){ + key_timer = timer_read(); // if the key is being pressed, we start the timer. + register_code(KC_LSHIFT); + } else { // this means the key was just released (tap or "held down") + if(timer_elapsed(key_timer) < 152){ // Time in ms, the threshold we pick for counting something as a tap. + tap(KC_CAPS); + if(caps_status == 0){ + caps_status = 1; + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_capslock_on, false, 0); + #endif + } else { + caps_status = 0; + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_capslock_off, false, 0); + #endif + } + } + unregister_code(KC_LSHIFT); + } + return false; + break; + case CTRLB: // Control-B on tap (bold) + if(record->event.pressed){ + key_timer = timer_read(); // if the key is being pressed, we start the timer. + register_code(KC_LCTL); + } else { // this means the key was just released (tap or "held down") + if (timer_elapsed(key_timer) < 152) { // Time in ms, the threshold we pick for counting something as a tap. + tap(KC_B); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_ctrl_mod, false, 0); + #endif + #ifdef BACKLIGHT_BREATHING + breathing_speed_set(2); + breathing_pulse(); + #endif + } + unregister_code(KC_LCTL); + } + return false; + break; + case CPYPST: // One key copy/paste + if(record->event.pressed){ + key_timer = timer_read(); + } else { + if (timer_elapsed(key_timer) > 152) { // Hold, copy + register_code(KC_LCTL); + tap(KC_C); + unregister_code(KC_LCTL); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_copy, false, 0); + #endif + } else { // Tap, paste + register_code(KC_LCTL); + tap(KC_V); + unregister_code(KC_LCTL); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_paste, false, 0); + #endif + } + } + return false; + break; + #ifdef UNICODE_ENABLE + case UNIWIN: + if(record->event.pressed){ + set_unicode_input_mode(UC_WIN); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(uniwin, false, 0); + #endif + } + return false; + break; + case UNILIN: + if(record->event.pressed){ + set_unicode_input_mode(UC_LNX); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(unilin, false, 0); + #endif + } + return false; + break; + case DISFACE: // ಠ_ಠ + if(record->event.pressed){ + process_unicode((0x0CA0|QK_UNICODE), record); // Eye + register_code(KC_RSFT); + tap(KC_MINS); + unregister_code(KC_RSFT); + process_unicode((0x0CA0|QK_UNICODE), record); // Eye + } + return false; + break; + case TFLIP: // (╯°□°)╯ ︵ ┻━┻ + if(record->event.pressed){ + register_code(KC_RSFT); + tap(KC_9); + unregister_code(KC_RSFT); + process_unicode((0x256F|QK_UNICODE), record); // Arm + process_unicode((0x00B0|QK_UNICODE), record); // Eye + process_unicode((0x25A1|QK_UNICODE), record); // Mouth + process_unicode((0x00B0|QK_UNICODE), record); // Eye + register_code(KC_RSFT); + tap(KC_0); + unregister_code(KC_RSFT); + process_unicode((0x256F|QK_UNICODE), record); // Arm + tap(KC_SPC); + process_unicode((0x0361|QK_UNICODE), record); // Flippy + tap(KC_SPC); + process_unicode((0x253B|QK_UNICODE), record); // Table + process_unicode((0x2501|QK_UNICODE), record); // Table + process_unicode((0x253B|QK_UNICODE), record); // Table + } + return false; + break; + case TPUT: // ┬──┬ ノ( ゜-゜ノ) + if(record->event.pressed){ + process_unicode((0x252C|QK_UNICODE), record); // Table + process_unicode((0x2500|QK_UNICODE), record); // Table + process_unicode((0x2500|QK_UNICODE), record); // Table + process_unicode((0x252C|QK_UNICODE), record); // Table + tap(KC_SPC); + process_unicode((0x30CE|QK_UNICODE), record); // Arm + register_code(KC_RSFT); + tap(KC_9); + unregister_code(KC_RSFT); + tap(KC_SPC); + process_unicode((0x309C|QK_UNICODE), record); // Eye + tap(KC_MINS); + process_unicode((0x309C|QK_UNICODE), record); // Eye + process_unicode((0x30CE|QK_UNICODE), record); // Arm + register_code(KC_RSFT); + tap(KC_0); + unregister_code(KC_RSFT); + } + return false; + break; + case SHRUG: // ¯\_(ツ)_/¯ + if(record->event.pressed){ + process_unicode((0x00AF|QK_UNICODE), record); // Hand + tap(KC_BSLS); // Arm + register_code(KC_RSFT); + tap(KC_UNDS); // Arm + tap(KC_LPRN); // Head + unregister_code(KC_RSFT); + process_unicode((0x30C4|QK_UNICODE), record); // Face + register_code(KC_RSFT); + tap(KC_RPRN); // Head + tap(KC_UNDS); // Arm + unregister_code(KC_RSFT); + tap(KC_SLSH); // Arm + process_unicode((0x00AF|QK_UNICODE), record); // Hand + } + return false; + break; + #endif + case FACE: // (o_O) + if(record->event.pressed){ + register_code(KC_RSFT); + tap(KC_LPRN); + unregister_code(KC_RSFT); + tap(KC_O); + register_code(KC_RSFT); + tap(KC_UNDS); + tap(KC_O); + tap(KC_RPRN); + unregister_code(KC_RSFT); + } + return false; + break; + case RANDIG: + if (record->event.pressed) { + tap_random_base64(); + } + return false; + break; + } + return true; +}; + +void matrix_init_user(void){ // Run once at startup + #ifdef AUDIO_ENABLE + _delay_ms(50); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); + #endif +} + +#ifdef AUDIO_ENABLE +void play_goodbye_tone(void){ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); +} + +void shutdown_user(){ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void){ // Run when the music layer is turned on + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void music_off_user(void){ // Run when music is turned off + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); +} +#endif + +#endif diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk index 62473e3564..6be5b55bcd 100644 --- a/keyboards/preonic/rules.mk +++ b/keyboards/preonic/rules.mk @@ -58,13 +58,13 @@ EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= no # Console for debug(+400) COMMAND_ENABLE ?= no # Commands for debug and configuration NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality MIDI_ENABLE ?= yes # MIDI controls AUDIO_ENABLE ?= yes # Audio output on port C6 UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. -API_SYSEX_ENABLE ?= yes +API_SYSEX_ENABLE ?= no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
\ No newline at end of file diff --git a/keyboards/satan/keymaps/admiralStrokers/Makefile b/keyboards/satan/keymaps/admiralStrokers/Makefile new file mode 100644 index 0000000000..61dfedeb84 --- /dev/null +++ b/keyboards/satan/keymaps/admiralStrokers/Makefile @@ -0,0 +1,24 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Enables your LED to breathe while your computer is sleeping. +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODEMAP_ENABLE = no # This allows sending unicode symbols using X(<unicode>) in your keymap. +UNICODE_ENABLE =no # Unicode +UCIS_ENABLE = no # Keep in mind that not all will work (See WinCompose for details on Windows). +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no# Breathing sleep LED during USB suspend +API_SYSEX_ENABLE = no # This enables using the Quantum SYSEX API to send strings +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/admiralStrokers/config.h b/keyboards/satan/keymaps/admiralStrokers/config.h new file mode 100644 index 0000000000..d0338fb7e9 --- /dev/null +++ b/keyboards/satan/keymaps/admiralStrokers/config.h @@ -0,0 +1,96 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H_ADMSTROK +#define CONFIG_H_ADMSTROK + +#include "config_common.h" +#include "../../config.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER SATAN +#define PRODUCT GH60 +#define DESCRIPTION QMK keyboard firmware for Satan GH60 with WS2812 support + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration */ +#define BACKLIGHT_LEVELS 4 + +/* Underlight configuration */ +#define RGB_DI_PIN E2 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#define DISABLE_SPACE_CADET_ROLLOVER + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/satan/keymaps/admiralStrokers/keymap.c b/keyboards/satan/keymaps/admiralStrokers/keymap.c new file mode 100644 index 0000000000..b6dc29c673 --- /dev/null +++ b/keyboards/satan/keymaps/admiralStrokers/keymap.c @@ -0,0 +1,195 @@ +#include "satan.h" + +static uint16_t key_timer; + +bool checktime(void){ + return (timer_elapsed(key_timer) < 150) ? true : false; + }; + +// general keydefs +#define norm 0 // Default layer +#define elev 1 // Layer directional keys +#define supr 2 // F-keys and mediakeys +#define spac 3 // +#define FNO1 4 // +#define FNO2 5 // +#define FNO3 6 // +#define MAC0 M(0) // +#define MAC1 M(1) // +#define MAC2 M(2) // +#define MAC3 M(3) // +#define MAC4 M(4) // +#define MAC5 M(5) // +#define MAC6 M(6) // +#define MAC7 M(7) // +#define MAC8 M(8) // +#define MAC9 M(9) // +#define GRAV KC_GRV // +#define MEDI F(FNO1)// + +// General shortenings +#define ESCA KC_ESC +#define MINS KC_MINS +#define EQUL KC_EQL +#define BSPC KC_BSPC +#define DELE KC_DEL +#define LBRC KC_LBRC +#define RBRC KC_RBRC +#define ALTR KC_RALT +#define SCLN KC_SCLN +#define QUOT KC_QUOT +#define NUHS KC_NUHS +#define ENTE KC_ENT +#define NUBS KC_NUBS // Less/ greater sign +#define COMM KC_COMM // Comma +#define FSTO KC_DOT // Full stop +#define SLSH KC_SLSH +#define ALTL KC_LALT +#define GUIL KC_LGUI +#define GUIR KC_RGUI +#define MENO KC_MENU +// The F-row/layer: +#define FK01 KC_F1 +#define FK02 KC_F2 +#define FK03 KC_F3 +#define FK04 KC_F4 +#define FK05 KC_F5 +#define FK06 KC_F6 +#define FK07 KC_F7 +#define FK08 KC_F8 +#define FK09 KC_F9 +#define FK10 KC_F10 +#define FK11 KC_F11 +#define FK12 KC_F12 +#define FK13 KC_F13 +#define FK14 KC_F14 +// Special Actions and Media Keys +#define INSE KC_INS // Insert here +#define HOME KC_HOME // Go to beginning of line +#define ENDI KC_END // go to end of line +#define PSCR KC_PSCR // Print Screen +#define SLCK KC_SLCK // go to end of line +#define PGDN KC_PGDN // go to end of line +#define PGUP KC_PGUP // go to end of line +#define PLPS KC_MPLY // Play/Pause +#define PAUS KC_PAUS // Pause button +#define MUTE KC_MUTE // Mute sound +#define VOLU KC_VOLU // Volume increase +#define VOLD KC_VOLD // Volume decrease +#define MNXT KC_MNXT // next track +#define MPRV KC_MPRV // prev track +#define MSTP KC_MSTP // stop playing +#define MSEL KC_MSEL // Select media (Start playing it) +#define MAIL KC_MAIL // Open default mail app +#define CALC KC_CALC // Open default calculator app +#define MYCM KC_MYCM // Open default file manager +//#define LILO KC_XXXXXX // Reserved for later +//#define LIHI KC_XXXXXX // Reserved for later + + +// dual-role shortcuts +#define DUTB LT(elev, KC_TAB) // `tabs` layer on hold and tab on tap +#define DUSP LT(spac, KC_SPACE) // `spce` layer on hold and space on tap +#define LOCK LGUI(KC_L) // lock computer (win) + +// Space Admiral Strokers +#define SADL MAC0 // Hold for lshift and { on tap +#define SADR MAC1 // Hold for rshift and } on tap +#define CADL MAC2 // Hold for lctrl and [ on tap +#define CADR MAC3 // Hold for rctrl and ] on tap + +// arrow cluster duality bottom right corner +#define ARLF ALT_T(KC_LEFT) // Left arrow +#define ARRT CTL_T(KC_RIGHT)// Right arrow +#define ARUP SFT_T(KC_UP) // Up arrow +#define ARDN GUI_T(KC_DOWN) // Down arrow + +// brackets +#define NOCL RALT(KC_7) // [ +#define NOCR RALT(KC_0) // ] +#define NOPL LSFT(KC_8) // ( +#define NOPR LSFT(KC_9) // ) +#define NOAL KC_NUBS // < +#define NOAR LSFT(KC_NUBS) // > +#define NOBL RALT(KC_8) // [ +#define NOBR RALT(KC_9) // ] + +// increase readability +#define XXXX KC_TRNS +#define DEAD KC_NO +#define SCAN KC_TRNS // Scandinavian keys, the Row 5 key 5 is actually Row 1 key 15 on the PCB + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[ norm ] = KEYMAP( // Normal scandinavian mapping (danish has QUOT and SCLN wapped) + GRAV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, MINS, EQUL, BSPC, DELE,\ + DUTB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, LBRC, RBRC, DEAD,\ + ALTR, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, SCLN, QUOT, NUHS, ENTE,\ + SADL, NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, COMM, FSTO, SLSH, SADR, DEAD,\ + CADL, ALTL, GUIL, DUSP, GUIR, MEDI, MENO, CADR), + +[ elev ] = KEYMAP( // The f-Row (with f13-14), Special keys and media keys + LOCK, FK01, FK02, FK03, FK04, FK05, FK06, FK07, FK08, FK09, FK10, FK11, FK12, FK13, FK14,\ + XXXX, XXXX, XXXX, XXXX, MAIL, XXXX, XXXX, HOME, INSE, PSCR, SLCK, PAUS, PGUP, XXXX,\ + XXXX, XXXX, XXXX, XXXX, MYCM, XXXX, XXXX, MPRV, PAUS, MNXT, XXXX, XXXX, PGDN, ENDI,\ + XXXX, XXXX, XXXX, XXXX, CALC, XXXX, XXXX, XXXX, MUTE, VOLD, VOLU, XXXX, ARUP, DEAD,\ + XXXX, XXXX, XXXX, PLPS, XXXX, ARLF, ARDN, ARRT), + +[ spac ] = KEYMAP( // The space controls (by pressing space) + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, DEAD,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX), + +[ supr ] = KEYMAP( // Additional layer for later use. + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, DEAD,\ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { // MACRODOWN only works in this function + switch(id) { + case 0: //MAC0 - Hold for lshift and { on tap + if (record->event.pressed) { + key_timer = timer_read(); + return MACRO(D(LSFT), END ); + } else { + return checktime() ? MACRO(U(LSFT),D(RALT),T(7),U(RALT),END): MACRO(U(LSFT),END); + }; break; + case 1: //MAC1 - Hold for rshift and } on tap + if (record->event.pressed) { + key_timer = timer_read(); + return MACRO(D(RSFT), END ); + } else { + return checktime() ? MACRO(U(RSFT),D(RALT),T(0),U(RALT),END): MACRO(U(RSFT),END); + }; break; + case 2: //MAC2 - Hold for lctrl and [ on tap + if (record->event.pressed) { + key_timer = timer_read(); + return MACRO(D(LCTL), END ); + } else {return checktime() ? MACRO(U(LCTL),D(RALT),T(8),U(RALT),END):MACRO(U(LCTL),END); + }; break; + case 3: //MAC3 - Hold for rctrl and ] on tap + if (record->event.pressed) { + key_timer = timer_read(); + return MACRO(D(RCTL), END ); + } else { + return checktime() ? MACRO(U(RCTL),D(RALT),T(9),U(RALT),END):MACRO(U(RCTL),END); + }; break; + case 4: //MAC4 reserved for later. + if (record->event.pressed) { } else { }; break; + case 5: //MAC5 reserved for later. + if (record->event.pressed) { } else { }; break; + case 6: //MAC6 reserved for later. + if (record->event.pressed) { } else { }; break; + } return MACRO_NONE; +}; +/* + Later use: + void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { } + enum function_id { }; + const uint16_t PROGMEM fn_actions[] = { }; + +*/ diff --git a/keyboards/satan/keymaps/admiralStrokers/readme.md b/keyboards/satan/keymaps/admiralStrokers/readme.md new file mode 100644 index 0000000000..9b30caf349 --- /dev/null +++ b/keyboards/satan/keymaps/admiralStrokers/readme.md @@ -0,0 +1,13 @@ +# Admiral Strokers keymap +## For the Satan GH60 PCB +The Admiral STN60 is a layout for users of the satan GH60, optimized with some nice features such as mod tap for brackets (Similar to Space Cadett), space mod for F-row/ layer with easy to access media and control keys. The layout below is just as an example and is ISO based, ANSI and JIS layouts will be included later. + +`````` +[ _tmp ] = KEYMAP( // Copy this to get started. SCAN is scandinavian layout specific. +XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX,\ +XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, DEAD,\ +XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, SCAN, XXXX,\ +XXXX, SCAN, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, DEAD,\ +XXXX, XXXX, XXXX, XXXX, SCAN, XXXX, XXXX, XXXX, XXXX),\ + +``` diff --git a/keyboards/satan/keymaps/midi/Makefile b/keyboards/satan/keymaps/midi/Makefile new file mode 100644 index 0000000000..89c34b3946 --- /dev/null +++ b/keyboards/satan/keymaps/midi/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = yes # MIDI support (+2400 to 4200, depending on config) +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/midi/config.h b/keyboards/satan/keymaps/midi/config.h new file mode 100644 index 0000000000..8e10b04ec2 --- /dev/null +++ b/keyboards/satan/keymaps/midi/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/satan/keymaps/midi/keymap.c b/keyboards/satan/keymaps/midi/keymap.c new file mode 100644 index 0000000000..8378b4e4b9 --- /dev/null +++ b/keyboards/satan/keymaps/midi/keymap.c @@ -0,0 +1,77 @@ +#include "satan.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _ML 1 + +// readability +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |Midi|Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP_ANSI( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, TG(_ML), KC_RCTL), + +#if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED) +/* Keymap _ML: MIDI Layer (Advanced) + * ,------------------------------------------------------------------------. + * | Exit | | | | | | | | | | | | | | + * |------------------------------------------------------------------------| + * | Ch+ | | C# | D# | | F# | G# | A# | | C# | D# | | | | + * |------------------------------------------------------------------------| + * | Mod | C | D | E | F | G | A | B | C | D | E | F | | + * |------------------------------------------------------------------------| + * | Sustain |Oct-|Oct+|Mod-|Mod+| | | |Tns-|Tns+|Tns0| Sustain | + * |------------------------------------------------------------------------| + * | | | | All notes off | | | | | + * `------------------------------------------------------------------------' + */ +[_ML] = KEYMAP_ANSI( + TG(_ML), MI_VEL_1, MI_VEL_2, MI_VEL_3, MI_VEL_4, MI_VEL_5, MI_VEL_6, MI_VEL_7, MI_VEL_8, MI_VEL_9, MI_VEL_10, XXXXXXX, XXXXXXX, XXXXXXX, \ + MI_CHU, XXXXXXX, MI_Cs, MI_Ds, XXXXXXX, MI_Fs, MI_Gs, MI_As, XXXXXXX, MI_Cs_1, MI_Ds_1, XXXXXXX, XXXXXXX, XXXXXXX, \ + MI_MOD, MI_C, MI_D, MI_E, MI_F, MI_G, MI_A, MI_B, MI_C_1, MI_D_1, MI_E_1, MI_F_1, _______, \ + MI_SUS, MI_OCTD, MI_OCTU, MI_MODSD, MI_MODSU, XXXXXXX, XXXXXXX, XXXXXXX, MI_TRNSD, MI_TRNSU, MI_TRNS_0, MI_SUS, \ + _______, _______, _______, MI_ALLOFF, _______, _______, _______, _______), +#elif defined(MIDI_ENABLE) && defined(MIDI_BASIC) +/* Keymap _ML: MIDI Layer (Advanced) + * ,------------------------------------------------------------------------. + * | Exit | | | | | | | | | | | | | | + * |------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | + * |------------------------------------------------------------------------| + * | | | | | | | | | | | | | | + * |------------------------------------------------------------------------| + * | |MuOn|MuOf|MiOn|MiOf| | | | | | | | + * |------------------------------------------------------------------------| + * | | | | | | | | | + * `------------------------------------------------------------------------' + */ + +[_ML] = KEYMAP_ANSI( + TG(_ML), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______), +#endif +};
\ No newline at end of file diff --git a/keyboards/satan/keymaps/midi/readme.md b/keyboards/satan/keymaps/midi/readme.md new file mode 100644 index 0000000000..87844a854b --- /dev/null +++ b/keyboards/satan/keymaps/midi/readme.md @@ -0,0 +1 @@ +# Satan GH60 layout demonstrating MIDI key mapping diff --git a/keyboards/satan/keymaps/smt/Makefile b/keyboards/satan/keymaps/smt/Makefile new file mode 100644 index 0000000000..0c9ae824f6 --- /dev/null +++ b/keyboards/satan/keymaps/smt/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/smt/keymap.c b/keyboards/satan/keymaps/smt/keymap.c new file mode 100644 index 0000000000..d90849914e --- /dev/null +++ b/keyboards/satan/keymaps/smt/keymap.c @@ -0,0 +1,141 @@ +#include "satan.h" + + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _FUNC 3 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK +}; + +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Custom macros +#define ALT_GRV ALT_T(KC_GRV) // Tap for Backtick, hold for Alt +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Shift+Alt) +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _QWERTY: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |Fn |Ctrl | + * `-----------------------------------------------------------' + */ +[_QWERTY] = KEYMAP_ANSI( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS, \ + CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, SFT_ENT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,MO(_FUNC),KC_RCTL), + + /* Keymap _COLEMAK: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| R| S| T| D| H| N| E| I| O| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| K| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |Fn |Ctrl | + * `-----------------------------------------------------------' + */ +[_COLEMAK] = KEYMAP_ANSI( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN,KC_LBRC, KC_RBRC,KC_BSLS, \ + CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O ,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM,KC_DOT, KC_SLSH, SFT_ENT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,MO(_FUNC),KC_RCTL), + + /* Keymap _DVORAK: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]|Backsp | + * |-----------------------------------------------------------| + * |HypTb| '| ,| .| P| Y| F| G| C| R| L| /| =| \ | + * |-----------------------------------------------------------| + * |CtrlEsc| A| O| E| U| I| D| H| T| N| S| -|Return | + * |-----------------------------------------------------------| + * |Shift | ;| Q| J| K| X| B| M| W| V| Z|ShiftEnter| + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |Fn |Ctrl | + * `-----------------------------------------------------------' + */ +[_DVORAK] = KEYMAP_ANSI( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC,KC_BSPC, \ + HPR_TAB, KC_QUOT,KC_COMM,KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, \ + CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, \ + KC_LSFT, KC_SCLN,KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,MO(_FUNC),KC_RCTL), + + /* Keymap _FUNC: Function Layer + * ,-----------------------------------------------------------. + * | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | + * |-----------------------------------------------------------| + * | |Hom| UP|End| | | |Qwt|Cmk|Dvk| |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | |LFT| DN| RT| | |LFT| DN| UP| RT|Vo+|Pg+| | + * |-----------------------------------------------------------| + * | | | |Prv|Ply|Nxt| | | |Vo-|Pg-| | + * |-----------------------------------------------------------| + * |RESET| | | | | | | | + * `-----------------------------------------------------------' + */ +[_FUNC] = KEYMAP_ANSI( + _______,KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_DEL, \ + _______,KC_HOME,KC_UP ,KC_END ,_______,_______,_______,QWERTY ,COLEMAK,DVORAK ,_______,BL_DEC ,BL_INC ,BL_TOGG, \ + _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,KC_LEFT,KC_DOWN,KC_UP ,KC_RGHT,KC_VOLU,KC_PGUP ,_______, \ + _______ ,_______,_______,KC_MPRV,KC_MPLY,KC_MNXT,_______,_______,_______,KC_VOLD,KC_PGDN ,_______, \ + RESET ,_______,_______ ,_______ ,_______,_______,_______,_______ + ) +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + } + return true; +} diff --git a/keyboards/satan/keymaps/smt/readme.md b/keyboards/satan/keymaps/smt/readme.md new file mode 100644 index 0000000000..7b706d6014 --- /dev/null +++ b/keyboards/satan/keymaps/smt/readme.md @@ -0,0 +1 @@ +# smt's Satan GH60 layout diff --git a/keyboards/subatomic/keymaps/default/config.h b/keyboards/subatomic/keymaps/default/config.h new file mode 100644 index 0000000000..4c61581993 --- /dev/null +++ b/keyboards/subatomic/keymaps/default/config.h @@ -0,0 +1,29 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#endif
\ No newline at end of file diff --git a/keyboards/tada68/keymaps/default/keymap.c b/keyboards/tada68/keymaps/default/keymap.c index da57c0343b..f28116e0a5 100644 --- a/keyboards/tada68/keymaps/default/keymap.c +++ b/keyboards/tada68/keymaps/default/keymap.c @@ -1,9 +1,5 @@ #include "tada68.h" - -// Used for SHIFT_ESC -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -36,63 +32,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _FL: Function Layer * ,----------------------------------------------------------------. - * | | | | | | | | | | | | | | RESET| | + * | | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del |Ins | * |----------------------------------------------------------------| - * | | | | | | | | | | | |BL-|BL+|BL | | + * | | |Up | | | | | | | | | | | |Hme | * |----------------------------------------------------------------| - * | | | | | | | | | | | | | | + * | |<- |Dn | ->| | | | | | | | | |End | * |----------------------------------------------------------------| - * | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | | | + * | | | |Bl-|BL |BL+| |VU-|VU+|MUT| |MouseL|MsU|Rck | * |----------------------------------------------------------------| - * | | | | | | | | | | | + * | | | | | | | |MsL|MsD|MsR | * `----------------------------------------------------------------' */ [_FL] = KEYMAP_ANSI( - #ifdef RGBLIGHT_ENABLE - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______, \ - _______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______,_______,_______, \ - _______,_______,_______, _______, _______,_______,_______,_______,_______, _______), - #else - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______, \ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ - _______,_______,_______, _______, _______,_______,_______,_______,_______, _______), - #endif -}; - -/*enum function_id { - //SHIFT_ESC, + _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS , \ + _______,_______,KC_UP, _______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG,KC_HOME, \ + _______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______, _______,KC_END, \ + _______,_______,_______,BL_DEC, BL_TOGG,BL_INC, _______,KC_VOLD,KC_VOLU,KC_MUTE,_______,KC_BTN1, KC_MS_U, KC_BTN2, \ + _______,_______,_______, _______, _______,_______,_______,KC_MS_L,KC_MS_D, KC_MS_R), }; - -const uint16_t PROGMEM fn_actions[] = { - //[0] = ACTION_FUNCTION(SHIFT_ESC), -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t shift_esc_shift_mask; - switch (id) { - case SHIFT_ESC: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; - if (record->event.pressed) { - if (shift_esc_shift_mask) { - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - if (shift_esc_shift_mask) { - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -}*/ diff --git a/keyboards/tada68/keymaps/default/readme.md b/keyboards/tada68/keymaps/default/readme.md index 36760d6b91..53412d7c25 100644 --- a/keyboards/tada68/keymaps/default/readme.md +++ b/keyboards/tada68/keymaps/default/readme.md @@ -1 +1,3 @@ # default TADA68 layout + +This layout replicates the default factory layout of the TADA68. diff --git a/keyboards/tada68/readme.md b/keyboards/tada68/readme.md index 552fdea529..dbe2fdca1b 100644 --- a/keyboards/tada68/readme.md +++ b/keyboards/tada68/readme.md @@ -1,4 +1,15 @@ TADA68 keyboard firmware -====================== +======================== -TODO: to be updated. +1) from the keyboards/tada68 directory run: +``` +$ make flashbin +``` + +2) hit the reset button on the TADA, the lights will start flashing. + +3) You'll see a new drive on your computer called TADA68. Backup the original factory `FLASH.BIN` file thats inside it. + +4) Delete `FLASH.BIN` from the TADA drive and copy `tada68_default.bin` that was generated at the root of the qmk directory into the TADA drive. + +5) Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
\ No newline at end of file diff --git a/keyboards/tv44/keymaps/smt/keymap.c b/keyboards/tv44/keymaps/smt/keymap.c index de5ce03e25..532e74de08 100644 --- a/keyboards/tv44/keymaps/smt/keymap.c +++ b/keyboards/tv44/keymaps/smt/keymap.c @@ -32,8 +32,8 @@ enum planck_keycodes { // Custom macros #define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl #define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift -#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper -#define ALT_GRV ALT_T(KC_GRV) // Tap for Backtick, hold for Alt +#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Alt+Shift) +#define ALT_GRV ALT_T(KC_GRV) // Tap for Backtick, hold for Alt (Ctrl+Alt+Shift) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -117,13 +117,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_LOWER] = KEYMAP_TV45( /*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/ - KC_0 , KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL , +ALL_T(KC_0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL , /*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/ - KC_DLR , KC_4, KC_5, KC_6, KC_DOT, KC_PLUS, KC_ASTR, KC_4, KC_5, KC_6, KC_DOT, KC_PGUP , +CTL_T(KC_DLR), KC_4, KC_5, KC_6, KC_DOT, KC_PLUS, KC_ASTR, KC_4, KC_5, KC_6, KC_DOT, KC_PGUP , /*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ - KC_EQL , KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_SLSH, KC_1, KC_2, KC_3, KC_UP, KC_PGDN , +SFT_T(KC_EQL), KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_SLSH, KC_1, KC_2, KC_3, KC_UP, SFT_T(KC_PGDN), /*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ - BACKLIT , _______ , _______ , KC_HOME , KC_END , _______ , KC_LEFT, KC_DOWN, KC_RGHT ), +ALT_T(BACKLIT), _______ , _______ , KC_HOME , KC_END , _______ , KC_LEFT, KC_DOWN, KC_RGHT ), /*`---------+---------------+---------+-------^^^------+-------^^^-------+----------+--------+--------+--------------'*/ /* Raise @@ -139,18 +139,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_RAISE] = KEYMAP_TV45( /*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/ - KC_TILD,KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL , +ALL_T(KC_TILD),KC_EXLM,KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL , /*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_QUES, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE , +CTL_T(KC_F1), KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_QUES, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE , /*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ - KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MINS, KC_SLSH, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS , + SFT_T(KC_F7), KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MINS, KC_SLSH, KC_EQL, KC_LBRC, KC_RBRC, SFT_T(KC_BSLS), /*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/ - BACKLIT , _______ , _______ , KC_MPLY , KC_MNXT , _______ , KC_MUTE, KC_VOLD, KC_VOLU ), +ALT_T(BACKLIT), _______ , _______ , KC_MPLY , KC_MNXT , _______ , KC_MUTE, KC_VOLD, KC_VOLU ), /*`---------+---------------+---------+-------^^^------+-------^^^-------+----------+--------+--------+--------------'*/ /* Adjust (Lower + Raise) * ,---------+------+------+------+------+------+------+------+------+------+------+---------. - * | | Reset| | | | | | | | | | Del | + * | | Reset| | | | | | | | | | Reset | * |---------`------`------`------`------`------`------`------`------`------`------`---------| * | | | | | |AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | * |----------`------`------`------`------`------`------`------`------`------`------`--------| @@ -161,7 +161,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_ADJUST] = KEYMAP_TV45( /*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------.*/ - _______, RESET , _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL , + _______, RESET , _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET , /*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`-----------------|*/ _______ ,_______, _______, _______, _______, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______ , /*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/ diff --git a/keyboards/xd60/keymaps/cheese/README.md b/keyboards/xd60/keymaps/cheese/README.md new file mode 100644 index 0000000000..8a5b97c036 --- /dev/null +++ b/keyboards/xd60/keymaps/cheese/README.md @@ -0,0 +1,13 @@ +# cheese's Layout +Customized xd60 keymap + + + + +## Programming Instructions: +`cd` into keymap directory, `make dfu` + +## Features +- Media keys and movement keys setup like on the pok3r +- Lower right movement keys setup like on the fc660m (fn+direction for home/end/page up and down) +- Caps lock can be triggered by pressing both shift keys at the same time (and deactivated the same way) diff --git a/keyboards/xd60/keymaps/cheese/base_layout.png b/keyboards/xd60/keymaps/cheese/base_layout.png Binary files differnew file mode 100644 index 0000000000..211c4c731e --- /dev/null +++ b/keyboards/xd60/keymaps/cheese/base_layout.png diff --git a/keyboards/xd60/keymaps/cheese/fn_layout.png b/keyboards/xd60/keymaps/cheese/fn_layout.png Binary files differnew file mode 100644 index 0000000000..fe5ae99e0f --- /dev/null +++ b/keyboards/xd60/keymaps/cheese/fn_layout.png diff --git a/keyboards/xd60/keymaps/cheese/keymap.c b/keyboards/xd60/keymaps/cheese/keymap.c new file mode 100644 index 0000000000..25919a41f4 --- /dev/null +++ b/keyboards/xd60/keymaps/cheese/keymap.c @@ -0,0 +1,67 @@ +#include "xd60.h" +#include "action_layer.h" + +// Each layer gets a name for readability. +// The underscores don't mean anything - you can +// have a layer called STUFF or any other name. +// Layer names don't all need to be of the same +// length, and you can also skip them entirely +// and just use numbers. +#define _BL 0 +#define _FL 1 +#define _LS 2 +#define _RS 3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |FUNCTION| A| S| D| F| G| H| J| K| L| ;| '|Return| + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |FN|Left|Up|Down|Right| + * `-----------------------------------------------------------' + */ + [_BL] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + F(0), KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, F(1), F(1), F(1), \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FL), KC_LEFT, KC_UP, KC_DOWN, KC_RIGHT), + +// Function Layer + [_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, \ + KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_CALC, KC_INS, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, \ + KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_PGDN, KC_END), + +// Left Shift Layer + [_LS] = KEYMAP( + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_CAPS, KC_CAPS, KC_CAPS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +// Right Shift Layer + [_RS] = KEYMAP( + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; + +// Custom Actions +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MODS(_LS, MOD_LSFT), + [1] = ACTION_LAYER_MODS(_RS, MOD_RSFT), +}; |
