diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/meson/config.h | 172 | ||||
| -rw-r--r-- | keyboards/meson/info.json | 108 | ||||
| -rw-r--r-- | keyboards/meson/keymaps/default/config.h | 19 | ||||
| -rw-r--r-- | keyboards/meson/keymaps/default/keymap.c | 78 | ||||
| -rw-r--r-- | keyboards/meson/keymaps/default/readme.md | 1 | ||||
| -rw-r--r-- | keyboards/meson/meson.c | 51 | ||||
| -rw-r--r-- | keyboards/meson/meson.h | 56 | ||||
| -rw-r--r-- | keyboards/meson/readme.md | 13 | ||||
| -rw-r--r-- | keyboards/meson/rules.mk | 81 |
9 files changed, 579 insertions, 0 deletions
diff --git a/keyboards/meson/config.h b/keyboards/meson/config.h new file mode 100644 index 0000000000..3e37c89fd7 --- /dev/null +++ b/keyboards/meson/config.h @@ -0,0 +1,172 @@ +/* +Copyright 2019 Luciano M + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Luciano M +#define PRODUCT Meson +#define DESCRIPTION 3x14 split keyboard with two thumb keys per side + +/* key matrix size */ +#define MATRIX_ROWS 8 // 4 rows each half +#define MATRIX_COLS 7 + +#define MATRIX_ROW_PINS { F7, C6, F6, F5 } +#define MATRIX_COL_PINS { D4, D7, E6, B3, B2, B6, F4 } +// #define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define USE_I2C +#define SOFT_SERIAL_PIN D0 + +#define RGB_DI_PIN B5 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 10 + #define RGBLIGHT_SPLIT + #define RGBLED_SPLIT { 5, 5 } + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ + /*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS + /*== customize breathing effect ==*/ + /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ + #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 + /*==== use exp() and sin() ====*/ + #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 + #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/meson/info.json b/keyboards/meson/info.json new file mode 100644 index 0000000000..3d7eab847f --- /dev/null +++ b/keyboards/meson/info.json @@ -0,0 +1,108 @@ +{ + "keyboard_name": "Meson", + "keyboard_folder": "meson", + "maintainer": "qmk", + "width": 15.5, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [ + {"label": "", "x": 0, "y": 0}, + {"label": "", "x": 1, "y": 0}, + {"label": "", "x": 2, "y": 0}, + {"label": "", "x": 3, "y": 0}, + {"label": "", "x": 4, "y": 0}, + {"label": "", "x": 5, "y": 0}, + {"label": "", "x": 6, "y": 0}, + {"label": "", "x": 8.5, "y": 0}, + {"label": "", "x": 9.5, "y": 0}, + {"label": "", "x": 10.5, "y": 0}, + {"label": "", "x": 11.5, "y": 0}, + {"label": "", "x": 12.5, "y": 0}, + {"label": "", "x": 13.5, "y": 0}, + {"label": "", "x": 14.5, "y": 0}, + {"label": "", "x": 0, "y": 1}, + {"label": "", "x": 1, "y": 1}, + {"label": "", "x": 2, "y": 1}, + {"label": "", "x": 3, "y": 1}, + {"label": "", "x": 4, "y": 1}, + {"label": "", "x": 5, "y": 1}, + {"label": "", "x": 6, "y": 1}, + {"label": "", "x": 8.5, "y": 1}, + {"label": "", "x": 9.5, "y": 1}, + {"label": "", "x": 10.5, "y": 1}, + {"label": "", "x": 11.5, "y": 1}, + {"label": "", "x": 12.5, "y": 1}, + {"label": "", "x": 13.5, "y": 1}, + {"label": "", "x": 14.5, "y": 1}, + {"label": "", "x": 0, "y": 2}, + {"label": "", "x": 1, "y": 2}, + {"label": "", "x": 2, "y": 2}, + {"label": "", "x": 3, "y": 2}, + {"label": "", "x": 4, "y": 2}, + {"label": "", "x": 5, "y": 2}, + {"label": "", "x": 6, "y": 2}, + {"label": "", "x": 8.5, "y": 2}, + {"label": "", "x": 9.5, "y": 2}, + {"label": "", "x": 10.5, "y": 2}, + {"label": "", "x": 11.5, "y": 2}, + {"label": "", "x": 12.5, "y": 2}, + {"label": "", "x": 13.5, "y": 2}, + {"label": "", "x": 14.5, "y": 2}, + {"label": "", "x": 4, "y": 3}, + {"label": "", "x": 5, "y": 3}, + {"label": "", "x": 9.5, "y": 3}, + {"label": "", "x": 10.5, "y": 3} + ] + }, + "LAYOUT_2u": { + "layout": [ + {"label": "", "x": 0, "y": 0}, + {"label": "", "x": 1, "y": 0}, + {"label": "", "x": 2, "y": 0}, + {"label": "", "x": 3, "y": 0}, + {"label": "", "x": 4, "y": 0}, + {"label": "", "x": 5, "y": 0}, + {"label": "", "x": 6, "y": 0}, + {"label": "", "x": 8.5, "y": 0}, + {"label": "", "x": 9.5, "y": 0}, + {"label": "", "x": 10.5, "y": 0}, + {"label": "", "x": 11.5, "y": 0}, + {"label": "", "x": 12.5, "y": 0}, + {"label": "", "x": 13.5, "y": 0}, + {"label": "", "x": 14.5, "y": 0}, + {"label": "", "x": 0, "y": 1}, + {"label": "", "x": 1, "y": 1}, + {"label": "", "x": 2, "y": 1}, + {"label": "", "x": 3, "y": 1}, + {"label": "", "x": 4, "y": 1}, + {"label": "", "x": 5, "y": 1}, + {"label": "", "x": 6, "y": 1}, + {"label": "", "x": 8.5, "y": 1}, + {"label": "", "x": 9.5, "y": 1}, + {"label": "", "x": 10.5, "y": 1}, + {"label": "", "x": 11.5, "y": 1}, + {"label": "", "x": 12.5, "y": 1}, + {"label": "", "x": 13.5, "y": 1}, + {"label": "", "x": 14.5, "y": 1}, + {"label": "", "x": 0, "y": 2}, + {"label": "", "x": 1, "y": 2}, + {"label": "", "x": 2, "y": 2}, + {"label": "", "x": 3, "y": 2}, + {"label": "", "x": 4, "y": 2}, + {"label": "", "x": 5, "y": 2}, + {"label": "", "x": 6, "y": 2}, + {"label": "", "x": 8.5, "y": 2}, + {"label": "", "x": 9.5, "y": 2}, + {"label": "", "x": 10.5, "y": 2}, + {"label": "", "x": 11.5, "y": 2}, + {"label": "", "x": 12.5, "y": 2}, + {"label": "", "x": 13.5, "y": 2}, + {"label": "", "x": 14.5, "y": 2}, + {"label": "", "x": 4, "y": 3, "w": 2}, + {"label": "", "x": 9.5, "y": 3, "w": 2} + ] + } + } + } + diff --git a/keyboards/meson/keymaps/default/config.h b/keyboards/meson/keymaps/default/config.h new file mode 100644 index 0000000000..cb72945366 --- /dev/null +++ b/keyboards/meson/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 Luciano M + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here
\ No newline at end of file diff --git a/keyboards/meson/keymaps/default/keymap.c b/keyboards/meson/keymaps/default/keymap.c new file mode 100644 index 0000000000..002fc79775 --- /dev/null +++ b/keyboards/meson/keymaps/default/keymap.c @@ -0,0 +1,78 @@ +/* Copyright 2019 Luciano M + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + MESON = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( /* Base */ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TAB, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LALT, KC_GRV, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LGUI, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, + MO(1), KC_SPC, KC_SPC, MO(2) + ), + + [1] = LAYOUT( /* Symbols */ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_TAB, KC_BSLS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, RGB_VAI, + KC_LCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_VAD, + KC_LSFT, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, MESON, RGB_MOD, + MO(1), KC_SPC, KC_SPC, MO(3) + ), + + [2] = LAYOUT( /* Numbers */ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TAB, KC_BSLS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_VOLU, + KC_LCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, + KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_LGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_MPRV, KC_MNXT, KC_MPLY, + MO(3), KC_SPC, KC_SPC, MO(2) + ), + + [3] = LAYOUT( /* Reset, other functions if you want */ + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case MESON: + if (record->event.pressed) { + // when keycode MESON is pressed + SEND_STRING("Meson macro working"); + } else { + // when keycode MESON is released + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/meson/keymaps/default/readme.md b/keyboards/meson/keymaps/default/readme.md new file mode 100644 index 0000000000..04d94252be --- /dev/null +++ b/keyboards/meson/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for meson diff --git a/keyboards/meson/meson.c b/keyboards/meson/meson.c new file mode 100644 index 0000000000..9dc6f6a2e6 --- /dev/null +++ b/keyboards/meson/meson.c @@ -0,0 +1,51 @@ +/* Copyright 2019 Luciano M + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "meson.h" + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +/* + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + +*/ diff --git a/keyboards/meson/meson.h b/keyboards/meson/meson.h new file mode 100644 index 0000000000..5344d5410c --- /dev/null +++ b/keyboards/meson/meson.h @@ -0,0 +1,56 @@ +/* Copyright 2019 Luciano M + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +#include "quantum.h" + +#define ___ KC_NO + +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, L06, R06, R05, R04, R03, R02, R01, R00, \ + L10, L11, L12, L13, L14, L15, L16, R16, R15, R14, R13, R12, R11, R10, \ + L20, L21, L22, L23, L24, L25, L26, R26, R25, R24, R23, R22, R21, R20, \ + L30, L31, R31, R30 \ +) \ +{ \ + { L00, L01, L02, L03, L04, L05, L06}, \ + { L10, L11, L12, L13, L14, L15, L16}, \ + { L20, L21, L22, L23, L24, L25, L26}, \ + { ___, ___, ___, ___, L30, L31, ___}, \ + { R00, R01, R02, R03, R04, R05, R06}, \ + { R10, R11, R12, R13, R14, R15, R16}, \ + { R20, R21, R22, R23, R24, R25, R26}, \ + { ___, ___, ___, ___, R30, R31, ___}, \ +} + +// 2u SPACEBAR LAYOUT, DON'T FORGET TO CHANGE NAME OF LAYOUTS IN KEYMAP.C + +#define LAYOUT_2u( \ + L00, L01, L02, L03, L04, L05, L06, R06, R05, R04, R03, R02, R01, R00, \ + L10, L11, L12, L13, L14, L15, L16, R16, R15, R14, R13, R12, R11, R10, \ + L20, L21, L22, L23, L24, L25, L26, R26, R25, R24, R23, R22, R21, R20, \ + L30, R30 \ +) \ +{ \ + { L00, L01, L02, L03, L04, L05, L06}, \ + { L10, L11, L12, L13, L14, L15, L16}, \ + { L20, L21, L22, L23, L24, L25, L26}, \ + { ___, ___, ___, ___, L30, ___, ___},\ + { R00, R01, R02, R03, R04, R05, R06}, \ + { R10, R11, R12, R13, R14, R15, R16}, \ + { R20, R21, R22, R23, R24, R25, R26}, \ + { ___, ___, ___, ___, R30, ___, ___},\ +} diff --git a/keyboards/meson/readme.md b/keyboards/meson/readme.md new file mode 100644 index 0000000000..3824690c12 --- /dev/null +++ b/keyboards/meson/readme.md @@ -0,0 +1,13 @@ +# meson + +A 3x14 split keyboard with two thumb keys on each half. Supports MX, Alps, and Choc reversible. + +Keyboard Maintainer: [PyroL](https://github.com/PyrooL) +Hardware Supported: Meson PCBs, Pro Micro +Hardware Availability: [open source at PyroL's Github](https://github.com/PyrooL/Meson) + +Make example for this keyboard (after setting up your build environment): + + make meson:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/meson/rules.mk b/keyboards/meson/rules.mk new file mode 100644 index 0000000000..4b585e8291 --- /dev/null +++ b/keyboards/meson/rules.mk @@ -0,0 +1,81 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = caterina + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +SPLIT_KEYBOARD = yes +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) |