4 files changed, 32 insertions, 66 deletions
diff --git a/keyboards/sowbug/68keys/bootloader_defs.h b/keyboards/sowbug/68keys/bootloader_defs.h
deleted file mode 100644
index 6b8fa9f727..0000000000
--- a/keyboards/sowbug/68keys/bootloader_defs.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000
diff --git a/keyboards/sowbug/68keys/rules.mk b/keyboards/sowbug/68keys/rules.mk
index 0439491245..7dc7c6f6db 100644
--- a/keyboards/sowbug/68keys/rules.mk
+++ b/keyboards/sowbug/68keys/rules.mk
@@ -1,34 +1,27 @@
 # MCU name
 MCU = STM32F103
 
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = full	# Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes	  # Mouse keys
-EXTRAKEY_ENABLE = yes	  # Audio control and System control
-CONSOLE_ENABLE = no
-COMMAND_ENABLE = no     # Commands for debug and configuration
-SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-AUDIO_ENABLE = no
+BOOTMAGIC_ENABLE = full     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = WS2812
 
-# Want backlighting and RGB Matrix patterns? See the note in the readme,
-# apply the patches, and then uncomment the lines below as well as the one in
-# config.h.
-#
-# BACKLIGHT_ENABLE = yes
-# BACKLIGHT_DRIVER = rgb_matrix
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
diff --git a/keyboards/sowbug/ansi_tkl/bootloader_defs.h b/keyboards/sowbug/ansi_tkl/bootloader_defs.h
deleted file mode 100644
index 6b8fa9f727..0000000000
--- a/keyboards/sowbug/ansi_tkl/bootloader_defs.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000
diff --git a/keyboards/sowbug/ansi_tkl/rules.mk b/keyboards/sowbug/ansi_tkl/rules.mk
index 0439491245..7dc7c6f6db 100644
--- a/keyboards/sowbug/ansi_tkl/rules.mk
+++ b/keyboards/sowbug/ansi_tkl/rules.mk
@@ -1,34 +1,27 @@
 # MCU name
 MCU = STM32F103
 
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = full	# Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes	  # Mouse keys
-EXTRAKEY_ENABLE = yes	  # Audio control and System control
-CONSOLE_ENABLE = no
-COMMAND_ENABLE = no     # Commands for debug and configuration
-SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-AUDIO_ENABLE = no
+BOOTMAGIC_ENABLE = full     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = WS2812
 
-# Want backlighting and RGB Matrix patterns? See the note in the readme,
-# apply the patches, and then uncomment the lines below as well as the one in
-# config.h.
-#
-# BACKLIGHT_ENABLE = yes
-# BACKLIGHT_DRIVER = rgb_matrix
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE