9 files changed, 344 insertions, 0 deletions
diff --git a/keyboards/primekb/prime_m/config.h b/keyboards/primekb/prime_m/config.h
new file mode 100644
index 0000000000..82a8037c99
--- /dev/null
+++ b/keyboards/primekb/prime_m/config.h
@@ -0,0 +1,57 @@
+/*
+Copyright 2018 Jumail Mundekkat
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x4024
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    PrimeKB
+#define PRODUCT         Prime_M
+#define DESCRIPTION     6x5 Macropad
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 6
+
+/* Keyboard Matrix Assignments */
+#define MATRIX_ROW_PINS { C5, B5, B2, D5, D3 }
+#define MATRIX_COL_PINS { B3, C7, C6, D2, D1, D0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 4
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
diff --git a/keyboards/primekb/prime_m/info.json b/keyboards/primekb/prime_m/info.json
new file mode 100644
index 0000000000..5332522022
--- /dev/null
+++ b/keyboards/primekb/prime_m/info.json
@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "Prime_M",
+  "url": "https://www.primekb.com",
+  "maintainer": "MxBlu",
+  "width": 6,
+  "height": 5,
+  "layouts": {
+      "LAYOUT": {
+          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}]
+      }
+  }
+}
diff --git a/keyboards/primekb/prime_m/keymaps/default/config.h b/keyboards/primekb/prime_m/keymaps/default/config.h
new file mode 100644
index 0000000000..95917a65cd
--- /dev/null
+++ b/keyboards/primekb/prime_m/keymaps/default/config.h
@@ -0,0 +1,19 @@
+/* Copyright 2018 Jumail Mundekkat
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
diff --git a/keyboards/primekb/prime_m/keymaps/default/keymap.c b/keyboards/primekb/prime_m/keymaps/default/keymap.c
new file mode 100644
index 0000000000..d230439d08
--- /dev/null
+++ b/keyboards/primekb/prime_m/keymaps/default/keymap.c
@@ -0,0 +1,82 @@
+/* Copyright 2018 Jumail Mundekkat
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT(
+		KC_ESC, KC_LPRN, KC_RPRN, KC_PSLS, KC_PAST, LT(2, KC_BSPC), 
+		KC_F1, KC_F2, KC_P7, KC_P8, KC_P9, KC_DEL, 
+		KC_F3, KC_F4, KC_P4, KC_P5, KC_P6, KC_PMNS, 
+		KC_F5, KC_F6, KC_P1, KC_P2, KC_P3, KC_PPLS, 
+		KC_LCTL, KC_LALT, TO(1), KC_P0, KC_PDOT, KC_ENT
+    ),
+
+	[1] = LAYOUT(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, LT(2, KC_F9), 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, 
+		KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, 
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, 
+		KC_LCTL, KC_LALT, TO(0), KC_P, KC_H, KC_SPC
+    ),
+    
+    [2] = LAYOUT(
+		BL_TOGG, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD
+    )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/primekb/prime_m/keymaps/default/readme.md b/keyboards/primekb/prime_m/keymaps/default/readme.md
new file mode 100644
index 0000000000..5654918abb
--- /dev/null
+++ b/keyboards/primekb/prime_m/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for prime_m
+\ No newline at end of file
diff --git a/keyboards/primekb/prime_m/prime_m.c b/keyboards/primekb/prime_m/prime_m.c
new file mode 100644
index 0000000000..a33db95d83
--- /dev/null
+++ b/keyboards/primekb/prime_m/prime_m.c
@@ -0,0 +1,43 @@
+/* Copyright 2018 Jumail Mundekkat
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "prime_m.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/primekb/prime_m/prime_m.h b/keyboards/primekb/prime_m/prime_m.h
new file mode 100644
index 0000000000..0449a66d9b
--- /dev/null
+++ b/keyboards/primekb/prime_m/prime_m.h
@@ -0,0 +1,35 @@
+/* Copyright 2018 Jumail Mundekkat
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef PRIME_M_H
+#define PRIME_M_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K00, K01, K02, K03, K04, K05, \
+	K10, K11, K12, K13, K14, K15, \
+	K20, K21, K22, K23, K24, K25, \
+	K30, K31, K32, K33, K34, K35, \
+	K40, K41, K42, K43, K44, K45  \
+) { \
+	{ K00,   K01,   K02,   K03,   K04,   K05 }, \
+	{ K10,   K11,   K12,   K13,   K14,   K15 }, \
+	{ K20,   K21,   K22,   K23,   K24,   K25 }, \
+	{ K30,   K31,   K32,   K33,   K34,   K35 }, \
+	{ K40,   K41,   K42,   K43,   K44,   K45 }  \
+}
+
+#endif
diff --git a/keyboards/primekb/prime_m/readme.md b/keyboards/primekb/prime_m/readme.md
new file mode 100644
index 0000000000..668b29e4ae
--- /dev/null
+++ b/keyboards/primekb/prime_m/readme.md
@@ -0,0 +1,15 @@
+# Prime_M
+
+![Prime_M](https://i.imgur.com/Iqa6FJw.jpg)
+
+The Prime_M is a premium input device that is designed to be flexible so that it can cover many needs. The case is milled from a solid block of aluminum and features an integrated switch plate, which is 4.75mm thick yet designed to allow MX style switches to properly snap in. The bottom cover is machine from solid brass and is pre-drilled/countersunk for use with optional feet to give the device a slight tilt.
+
+Keyboard Maintainer: [MxBlue](https://github.com/MxBlu)  
+Hardware Supported: Prime_M PCB, ATMega32u2  
+Hardware Availability: [GB Post](https://geekhack.org/index.php?topic=91821.0), [B-Stock Listing](https://www.primekb.com/products/prime_m)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make primekb/prime_m:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/primekb/prime_m/rules.mk b/keyboards/primekb/prime_m/rules.mk
new file mode 100644
index 0000000000..8d3b835f18
--- /dev/null
+++ b/keyboards/primekb/prime_m/rules.mk
@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)