diff options
Diffstat (limited to 'keyboards/mechwild/mokulua/standard/config.h')
| -rw-r--r-- | keyboards/mechwild/mokulua/standard/config.h | 135 |
1 files changed, 0 insertions, 135 deletions
diff --git a/keyboards/mechwild/mokulua/standard/config.h b/keyboards/mechwild/mokulua/standard/config.h deleted file mode 100644 index be6495048c..0000000000 --- a/keyboards/mechwild/mokulua/standard/config.h +++ /dev/null @@ -1,135 +0,0 @@ -// Copyright 2022 Kyle McCreery (@kylemccreery) -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x6D77 // mw = "MechWild" -#define PRODUCT_ID 0x170B -#define DEVICE_VER 0x0103 -#define MANUFACTURER MechWild -#define PRODUCT Mokulua - -/* Key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 6 - -/* Key matrix pins */ -#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3 } -#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } -#define UNUSED_PINS - -/* Encoder pins */ -#define ENCODERS_PAD_A { D2 } -#define ENCODERS_PAD_B { B2 } - -/* Encoder resolution */ -#define ENCODER_RESOLUTION 4 -#define TAP_CODE_DELAY 10 - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -#define OLED_FONT_H "keyboards/mechwild/mokulua/lib/mokulua.c" - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D3 -#define MASTER_LEFT -//#define MASTER_RIGHT -#define RGBLIGHT_SPLIT -#define RGBLED_SPLIT { 8, 8 } -#define SPLIT_LAYER_STATE_ENABLE -#define SPLIT_LED_STATE_ENABLE -#define SPLIT_MODS_ENABLE -#define SPLIT_OLED_ENABLE - -/* RGB options */ -#define RGB_DI_PIN B6 -#ifdef RGB_DI_PIN -# define RGBLED_NUM 16 -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== all animations enable ==*/ -//# define RGBLIGHT_ANIMATIONS -/*== or choose animations ==*/ -//# define RGBLIGHT_EFFECT_BREATHING -# define RGBLIGHT_EFFECT_RAINBOW_MOOD -# define RGBLIGHT_EFFECT_RAINBOW_SWIRL -//# define RGBLIGHT_EFFECT_SNAKE -//# define RGBLIGHT_EFFECT_KNIGHT -//# define RGBLIGHT_EFFECT_CHRISTMAS -//# define RGBLIGHT_EFFECT_STATIC_GRADIENT -//# define RGBLIGHT_EFFECT_RGB_TEST -//# define RGBLIGHT_EFFECT_ALTERNATING -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT - - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 |