4 files changed, 149 insertions, 0 deletions
diff --git a/keyboards/kapl/rev1/config.h b/keyboards/kapl/rev1/config.h
new file mode 100644
index 0000000000..12007a3a13
--- /dev/null
+++ b/keyboards/kapl/rev1/config.h
@@ -0,0 +1,55 @@
+// Copyright 2022 Alexander Lozyuk (@keyzog)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4C41 // "LA" Lozyuk Alexander
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    keyzog
+#define PRODUCT         Kapl Keyboard
+
+/* key matrix size */
+/* Rows are doubled up */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 7
+
+// wiring of each half
+#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+
+/* Serial settings */
+#define USE_SERIAL
+
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D2
+
+/* Select hand configuration */
+#define MASTER_LEFT
+
+#define RGB_DI_PIN D4
+#define RGBLED_NUM 88
+#define RGBLED_SPLIT { 44, 44 }
+#define RGBLIGHT_SPLIT
+#define RGBLIGHT_LIMIT_VAL 120 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
+
+#define DRIVER_LED_TOTAL 88
+#define RGB_MATRIX_SPLIT { 44, 44 }
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
+#define SPLIT_TRANSPORT_MIRROR
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define SPLIT_LAYER_STATE_ENABLE
+#define SPLIT_LED_STATE_ENABLE
diff --git a/keyboards/kapl/rev1/rev1.c b/keyboards/kapl/rev1/rev1.c
new file mode 100644
index 0000000000..b51021307e
--- /dev/null
+++ b/keyboards/kapl/rev1/rev1.c
@@ -0,0 +1,55 @@
+// Copyright 2022 Alexander Lozyuk (@keyzog)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include "kapl.h"
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+    // Left Hand
+    // { 8,  7,  6,  5,  4,  3,  2,  1,  0 }, // underglow
+    {  9, 10, 11, 12, 13, 14, 15 },
+    { 22, 21, 20, 19, 18, 17, 16 },
+    { 23, 24, 25, 26, 27, 28, 29 },
+    { 36, 35, 34, 33, 32, 31, 30 },
+    { 37, 38, 39, 40, 41, 42, 43 },
+
+    // Right Hand
+    // { 44,  45,  46,  47,  48,  49,  50,  51,  52 }, // underglow
+    { 53, 54, 55, 56, 57, 58, 59 },
+    { 66, 65, 64, 63, 62, 61, 60 },
+    { 67, 68, 69, 70, 71, 72, 73 },
+    { 80, 79, 78, 77, 76, 75, 74 },
+    { 81, 82, 83, 84, 85, 86, 87 }
+}, {
+    // Left Hand
+    {96, 57},  {112, 44}, {112, 19}, {80, 19}, {48, 19}, {16, 19}, {16, 57}, {48, 57}, {80, 57}, // underglow
+    {0, 0},    {17, 0},   {34, 0},   {52, 0},  {69, 0},  {86, 0},  {103, 0},
+    {103, 16}, {86, 16},  {69, 16},  {52, 16}, {34, 16}, {17, 16}, {0, 16},
+    {0, 32},   {17, 32},  {34, 32},  {52, 32}, {69, 32}, {86, 32}, {103, 32},
+    {103, 48}, {86, 48},  {69, 48},  {52, 48}, {34, 48}, {17, 48}, {0, 48},
+    {0, 64},   {17, 64},  {34, 64},  {52, 64}, {69, 64}, {86, 64}, {103, 64},
+
+    // Right Hand
+    {144, 57}, {128, 44}, {128, 19}, {160, 19}, {192, 19}, {224, 19}, {224, 57}, {192, 57}, {160, 57}, // underglow
+    {224, 0},  {207, 0},  {190, 0},  {172, 0},  {155, 0},  {138, 0},  {121, 0},
+    {121, 16}, {138, 16}, {155, 16}, {172, 16}, {190, 16}, {207, 16}, {224, 16},
+    {224, 32}, {207, 32}, {190, 32}, {172, 32}, {155, 32}, {138, 32}, {121, 32},
+    {121, 48}, {138, 48}, {155, 48}, {172, 48}, {190, 48}, {207, 48}, {224, 48},
+    {224, 64}, {207, 64}, {190, 64}, {172, 64}, {155, 64}, {138, 64}, {121, 64}
+}, {
+    // Left Hand
+    2, 2, 2, 2, 2, 2, 2, 2, 2, // underglow
+    1, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 1,
+    1, 1, 1, 1, 1, 1, 1,
+
+    // Right Hand
+    2, 2, 2, 2, 2, 2, 2, 2, 2, // underglow
+    1, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 1,
+    1, 1, 1, 1, 1, 1, 1
+} };
+#endif
diff --git a/keyboards/kapl/rev1/rev1.h b/keyboards/kapl/rev1/rev1.h
new file mode 100644
index 0000000000..68649a7991
--- /dev/null
+++ b/keyboards/kapl/rev1/rev1.h
@@ -0,0 +1,34 @@
+// Copyright 2022 Alexander Lozyuk (@keyzog)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#include "kapl.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define LAYOUT( \
+  L00, L01, L02, L03, L04, L05, L06,        R00, R01, R02, R03, R04, R05, R06, \
+  L10, L11, L12, L13, L14, L15, L16,        R10, R11, R12, R13, R14, R15, R16, \
+  L20, L21, L22, L23, L24, L25, L26,        R20, R21, R22, R23, R24, R25, R26, \
+  L30, L31, L32, L33, L34, L35, L36,        R30, R31, R32, R33, R34, R35, R36, \
+  L40, L41, L42, L43, L44,   L45, L46,    R40, R41,   R42, R43, R44, R45, R46  \
+) \
+{ \
+    { L00, L01, L02, L03, L04, L05, L06 }, \
+    { L10, L11, L12, L13, L14, L15, L16 }, \
+    { L20, L21, L22, L23, L24, L25, L26 }, \
+    { L30, L31, L32, L33, L34, L35, L36 }, \
+    { L40, L41, L42, L43, L44, L45, L46 }, \
+    { R06, R05, R04, R03, R02, R01, R00 }, \
+    { R16, R15, R14, R13, R12, R11, R10 }, \
+    { R26, R25, R24, R23, R22, R21, R20 }, \
+    { R36, R35, R34, R33, R32, R31, R30 }, \
+    { R46, R45, R44, R43, R42, R41, R40 }  \
+}
diff --git a/keyboards/kapl/rev1/rules.mk b/keyboards/kapl/rev1/rules.mk
new file mode 100644
index 0000000000..e3a4137694
--- /dev/null
+++ b/keyboards/kapl/rev1/rules.mk
@@ -0,0 +1,5 @@
+# Do not enable RGB_MATRIX_ENABLE together with RGBLIGHT_ENABLE
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
+
+LTO_ENABLE = yes