14 files changed, 263 insertions, 0 deletions
diff --git a/keyboards/jc65/Makefile b/keyboards/jc65/Makefile
new file mode 100644
index 0000000000..57b2ef62e5
--- /dev/null
+++ b/keyboards/jc65/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
diff --git a/keyboards/jc65/config.h b/keyboards/jc65/config.h
new file mode 100644
index 0000000000..6e1306b276
--- /dev/null
+++ b/keyboards/jc65/config.h
@@ -0,0 +1,63 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    dou
+#define PRODUCT         KEYCLACK65-V1
+#define DESCRIPTION     JC65 PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/* QMK JC65 PCB default pin-out */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4, F5 }
+#define UNUSED_PINS
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+#define DIODE_DIRECTION COL2ROW
+#define DEBOUNCING_DELAY 5
+
+#define IS_COMMAND() ( \
+        keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+    )
+
+
+
+#endif
diff --git a/keyboards/jc65/jc65.c b/keyboards/jc65/jc65.c
new file mode 100644
index 0000000000..82b1d57416
--- /dev/null
+++ b/keyboards/jc65/jc65.c
@@ -0,0 +1,28 @@
+#include "jc65.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/jc65/jc65.h b/keyboards/jc65/jc65.h
new file mode 100644
index 0000000000..41ec3cf64e
--- /dev/null
+++ b/keyboards/jc65/jc65.h
@@ -0,0 +1,21 @@
+#ifndef JC65_H
+#define JC65_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \
+     K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,   K1E,   K1F, \
+      K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,     K2D,     K2F, \
+     K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,   K3D,   K3E, K3F, \
+    K40,  K41,  K43,    K44,      K46,      K48,      K4A, K4B, K4C, K4D, K4E, K4F \
+)\
+{\
+  {K00, K01,   K02,   K03, K04, K05,   K06, K07,   K08, K09,   K0A, K0B, K0C,   K0D, K0E,   K0F}, \
+  {K10, KC_NO, K12,   K13, K14, K15,   K16, K17,   K18, K19,   K1A, K1B, K1C,   K1D, K1E,   K1F}, \
+  {K20, KC_NO, K22,   K23, K24, K25,   K26, K27,   K28, K29,   K2A, K2B, K2C,   K2D, KC_NO, K2F}, \
+  {K30, K31,   K32,   K33, K34, K35,   K36, K37,   K38, K39,   K3A, K3B, KC_NO, K3D, K3E,   K3F}, \
+  {K40, K41,   KC_NO, K43, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C,   K4D, K4E,   K4F}, \
+}
+
+#endif
diff --git a/keyboards/jc65/keymaps/default/Makefile b/keyboards/jc65/keymaps/default/Makefile
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/keyboards/jc65/keymaps/default/Makefile
diff --git a/keyboards/jc65/keymaps/default/config.h b/keyboards/jc65/keymaps/default/config.h
new file mode 100644
index 0000000000..a5568e400d
--- /dev/null
+++ b/keyboards/jc65/keymaps/default/config.h
@@ -0,0 +1 @@
+#include "../../config.h"
diff --git a/keyboards/jc65/keymaps/default/keymap.c b/keyboards/jc65/keymaps/default/keymap.c
new file mode 100644
index 0000000000..de787f3892
--- /dev/null
+++ b/keyboards/jc65/keymaps/default/keymap.c
@@ -0,0 +1,11 @@
+#include "jc65.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = KEYMAP(
+      KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS,
+      KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+      KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+      KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+      KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_SPACE, KC_SPACE, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+      ),
+};
diff --git a/keyboards/jc65/keymaps/default/readme.md b/keyboards/jc65/keymaps/default/readme.md
new file mode 100644
index 0000000000..13430a630b
--- /dev/null
+++ b/keyboards/jc65/keymaps/default/readme.md
@@ -0,0 +1,10 @@
+Default Keymap
+===
+
+Super simple default keymap with only a base layer.
+
+Keymap Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo)
+
+Difference from base layout: This is (as close as I can tell) the same as the layout that ships on the boards other than default underglow color.
+
+Intended usage: This is mostly provided for testing before you build your own keymap and as a reference to a stock(ish) configuration
diff --git a/keyboards/jc65/keymaps/jetpacktuxedo/Makefile b/keyboards/jc65/keymaps/jetpacktuxedo/Makefile
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/keyboards/jc65/keymaps/jetpacktuxedo/Makefile
diff --git a/keyboards/jc65/keymaps/jetpacktuxedo/config.h b/keyboards/jc65/keymaps/jetpacktuxedo/config.h
new file mode 100644
index 0000000000..a5568e400d
--- /dev/null
+++ b/keyboards/jc65/keymaps/jetpacktuxedo/config.h
@@ -0,0 +1 @@
+#include "../../config.h"
diff --git a/keyboards/jc65/keymaps/jetpacktuxedo/keymap.c b/keyboards/jc65/keymaps/jetpacktuxedo/keymap.c
new file mode 100644
index 0000000000..af02b6f104
--- /dev/null
+++ b/keyboards/jc65/keymaps/jetpacktuxedo/keymap.c
@@ -0,0 +1,25 @@
+#include "jc65.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = KEYMAP(
+      KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_INS,
+      KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL,
+      MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+      KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+      KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_SPACE, KC_SPACE, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+      ),
+  [1] = KEYMAP(
+      KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_DEL, KC_TRNS,
+      MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_PGUP, KC_TRNS, KC_TRNS, KC_PGUP, KC_VOLD,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_HOME, KC_PGDN, KC_END
+      ),
+  [2] = KEYMAP(
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      MO(1), RGB_SAD, RGB_SAI, KC_TRNS, KC_TRNS, RGB_HUD, RGB_HUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS
+      ),
+};
diff --git a/keyboards/jc65/keymaps/jetpacktuxedo/readme.md b/keyboards/jc65/keymaps/jetpacktuxedo/readme.md
new file mode 100644
index 0000000000..4083d8f470
--- /dev/null
+++ b/keyboards/jc65/keymaps/jetpacktuxedo/readme.md
@@ -0,0 +1,10 @@
+Jetpacktuxedo's Keymap
+===
+
+Split backspace, 6.25u space, caps is fn, my standard fn layer, reset + rgb controls on layer(2)
+
+Keymap Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo)
+
+Difference from base layout: The base layer is the same, except caps is fn, and there are additional tools on layers
+
+Intended usage: This is my daily driver keymap
diff --git a/keyboards/jc65/readme.md b/keyboards/jc65/readme.md
new file mode 100644
index 0000000000..55ed72229c
--- /dev/null
+++ b/keyboards/jc65/readme.md
@@ -0,0 +1,22 @@
+JC65
+===
+
+![JC65](https://imgur.com/a/C2oa5)
+
+The JC65 PCB actually has two revisions: A QMK native version, and a PS2AVRGB version. Jchan offered both PCBs as options during the M65-A Round 1 group buy, and were also available choices for the 65% acrylic case group buy. In the near future both PCB versions should be available from keyclack.com when the storefront part opens.
+
+These docs are for the QMK version of the PCB. [More info on qmk.fm](http://qmk.fm/planck/)
+
+Keyboard Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo)
+Hardware Supported: JC65 rev.qmk
+Hardware Availability: [keyclack.com](https://keyclack.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make jc65-default
+
+Or to make and flash:
+
+    make jc65-default-dfu
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/jc65/rules.mk b/keyboards/jc65/rules.mk
new file mode 100644
index 0000000000..c2c02b6147
--- /dev/null
+++ b/keyboards/jc65/rules.mk
@@ -0,0 +1,68 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6