summaryrefslogtreecommitdiff
path: root/keyboards/infinity60/led_controller.c
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/infinity60/led_controller.c')
-rw-r--r--keyboards/infinity60/led_controller.c385
1 files changed, 201 insertions, 184 deletions
diff --git a/keyboards/infinity60/led_controller.c b/keyboards/infinity60/led_controller.c
index 59ca833b65..c162e9a8f0 100644
--- a/keyboards/infinity60/led_controller.c
+++ b/keyboards/infinity60/led_controller.c
@@ -72,8 +72,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BREATHE_LED_ADDRESS CAPS_LOCK_LED_ADDRESS
#endif
-#define DEBUG_ENABLED 1
-
/* =================
* ChibiOS I2C setup
* ================= */
@@ -145,7 +143,6 @@ void is31_init(void) {
__builtin_memset(full_page,0,0xB4+1);
// zero function page, all registers (assuming full_page is all zeroes)
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
- // disable hardware shutdown
palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(GPIOB, 16);
chThdSleepMilliseconds(10);
@@ -182,7 +179,7 @@ static THD_FUNCTION(LEDthread, arg) {
uint8_t pwm_step_status, page_status;
//mailbox variables
- uint8_t temp, msg_type, msg_led;
+ uint8_t temp, msg_type, msg_pin, msg_col, msg_led;
msg_t msg;
/* //control register variables
@@ -199,14 +196,17 @@ page_status = 0; //start frame 0 (all off/on)
// (messages are queued (up to LED_MAILBOX_NUM_MSGS) if they can't
// be processed right away)
chMBFetch(&led_mailbox, &msg, TIME_INFINITE);
- msg_type = (msg >> 8) & 0xFF; //first byte is msg type
- msg_led = (msg) & 0xFF; //second byte is action information
+ msg_col = (msg >> 24) & 0xFF;//if needed
+ msg_pin = (msg >> 16) & 0XFF;//if needed (SET_FULL_ROW)
+ msg_type = (msg >> 8) & 0xFF; //second byte is msg type
+ msg_led = (msg) & 0xFF; //first byte is action information
xprintf("--------------------\n");
- chThdSleepMilliseconds(10);
xprintf("mailbox fetch\nmsg: %X\n", msg);
- chThdSleepMilliseconds(10);
- xprintf("type: %X - led: %X\n", msg_type, msg_led);
+ chThdSleepMilliseconds(20);
+ xprintf("type: %X - pin: %X\n", msg_type, msg_pin);
+ chThdSleepMilliseconds(20);
+ xprintf("col: %X - led: %X\n", msg_col, msg_led);
chThdSleepMilliseconds(10);
switch (msg_type){
@@ -214,8 +214,12 @@ page_status = 0; //start frame 0 (all off/on)
//TODO: lighting key led on keypress
break;
- //TODO: BLINK_ON/OFF_LED
- break;
+ case SET_FULL_ROW:
+ //write full byte to pin address, msg_pin = pin #, msg_led = byte to write
+ //writes only to current page
+ xprintf("SET_FULL_ROW\n");
+ write_led_byte(page_status,msg_pin,msg_led);
+ break;
case OFF_LED:
//on/off/toggle single led, msg_led = row/col of led
@@ -255,6 +259,7 @@ page_status = 0; //start frame 0 (all off/on)
chThdSleepMilliseconds(10);
set_led_bit(7, control_register_word, msg_led, 6);
is31_write_data (7, control_register_word, 0x02);
+ break;
case TOGGLE_ALL:
xprintf("TOGGLE_ALL: %d\n", msg_led);
@@ -272,17 +277,12 @@ page_status = 0; //start frame 0 (all off/on)
if (page_status > 0) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
- }
- //maintain lock leds
- if (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) {
- set_lock_leds(USB_LED_NUM_LOCK, 1);
- }
- if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
- set_lock_leds(USB_LED_CAPS_LOCK, 1);
- }
+ page_status=0;
- page_status=0;
+ //maintain lock leds
+ led_set(host_keyboard_leds());
+ }
break;
case TOGGLE_BACKLIGHT:
@@ -306,81 +306,75 @@ page_status = 0; //start frame 0 (all off/on)
case DISPLAY_PAGE://show single layer indicator or full map of layer
//msg_led = page to toggle on
- xprintf("DISPLAY_PAGE");
+ xprintf("DISPLAY_PAGE\n");
chThdSleepMilliseconds(10);
if (page_status != msg_led) {
xprintf(" - new page\n");
chThdSleepMilliseconds(10);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_led);
+ page_status = msg_led;
+
+ //maintain lock leds
+ led_set(host_keyboard_leds());
}
- page_status = msg_led;
break;
case RESET_PAGE:
+ //led_msg = page to reset
xprintf("RESET_PAGE\n");
- chThdSleepMilliseconds(10);
- //led_msg = page to reset
+ chThdSleepMilliseconds(10);
led_control_reg[0] = 0;
__builtin_memset(led_control_reg+1, 0, 0x12);
is31_write_data(msg_led, led_control_reg, 0x13);
-
- //maintain lock leds
- if (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) {
- set_lock_leds(USB_LED_NUM_LOCK, 1);
- }
- if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
- set_lock_leds(USB_LED_CAPS_LOCK, 1);
- }
break;
case TOGGLE_NUM_LOCK:
//msg_led = 0 or 1, off/on
xprintf("NUMLOCK: %d\n", msg_led);
chThdSleepMilliseconds(10);
- set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_led);
+ set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_led, page_status);
break;
case TOGGLE_CAPS_LOCK:
xprintf("CAPSLOCK: %d\n", msg_led);
chThdSleepMilliseconds(10);
//msg_led = 0 or 1, off/on
- set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_led);
+ set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_led, page_status);
break;
//TODO: MODE_BREATH
- case MODE_BREATH:
- break;
+
case STEP_BRIGHTNESS:
xprintf("STEP_BACKLIGHT\n");
chThdSleepMilliseconds(10);
//led_msg = step pwm up or down
- switch (msg_led) {
- case 0:
- if (pwm_step_status == 0) {
- pwm_step_status = 4;
- } else {
- pwm_step_status--;
- }
- break;
-
- case 1:
- if (pwm_step_status == 4) {
- pwm_step_status = 0;
- } else {
- pwm_step_status++;
- }
- break;
- }
+ switch (msg_led) {
+ case 0:
+ if (pwm_step_status == 0) {
+ pwm_step_status = 4;
+ } else {
+ pwm_step_status--;
+ }
+ break;
+
+ case 1:
+ if (pwm_step_status == 4) {
+ pwm_step_status = 0;
+ } else {
+ pwm_step_status++;
+ }
+ break;
+ }
- //populate 8 byte rows to write on each pin
- //first byte is register address, every 0x10 9 bytes are A-register pwm pins
- __builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
+ //populate 8 byte rows to write on each pin
+ //first byte is register address, every 0x10 9 bytes are A-register pwm pins
+ __builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
- for(i=0; i<8; i++) {
- pwm_register_array[0] = 0x24 + (i * 0x10);
- is31_write_data(0,pwm_register_array,9);
- }
- break;
+ for(i=0; i<8; i++) {
+ pwm_register_array[0] = 0x24 + (i * 0x10);
+ is31_write_data(0,pwm_register_array,9);
+ }
+ break;
/* case LED_MSG_SLEEP_LED_ON:
// save current settings
@@ -415,103 +409,104 @@ page_status = 0; //start frame 0 (all off/on)
xprintf("--------------------\n");
chThdSleepMilliseconds(10);
}
-#if DEBUG_ENABLED
- uint8_t j;
- uint8_t pages[3]={0x00, 0x07};
- //debugging code - print full led/blink/pwm registers on each frame
- xprintf("----layer state----: %X\n", layer_state);
- for(i=0;i<2;i++) {
- xprintf("page: %d\n", pages[i]);
- chThdSleepMilliseconds(2);
- for(j=0;j<0x24;j++){
- if(j > 0 && j % 9 == 0){
- xprintf("\n");
- }
- switch (j) {
- case 0:
- xprintf("\n--on-off--\n");
- chThdSleepMilliseconds(2);
- break;
- case 0x12:
- xprintf("\n--blink--\n");
- chThdSleepMilliseconds(2);
- break;
- }
- is31_read_register(pages[i],j,&temp);
- xprintf("%02X, ", temp);
- chThdSleepMilliseconds(2);
- }
+ }
+}
- xprintf("\n--pwm--\n");
- chThdSleepMilliseconds(2);
- for(j=0x24;j<0xB4;j++) {
- is31_read_register(pages[i],j,&temp);
- xprintf("%02X, ", temp);
- chThdSleepMilliseconds(2);
- if(j > 0x24 && (j-4) % 8 == 0){
- xprintf("\n");
- }
- }
- xprintf("\n");
+/* ==============================
+ * debug function
+ * ============================== */
+void print_debug(uint8_t page) {
+ uint8_t j, debug_temp;
+ //debugging code - print full led/blink/pwm registers on each frame
+ xprintf("----layer state----: %X\n", layer_state);
+ xprintf("page: %d\n", page);
+ chThdSleepMilliseconds(10);
+ for(j=0;j<0x24;j++){
+ if(j > 0 && j % 9 == 0){
+ xprintf("\n");
+ }
+ switch (j) {
+ case 0:
+ xprintf("\n--on-off--\n");
+ chThdSleepMilliseconds(10);
+ break;
+ case 0x12:
+ xprintf("\n--blink--\n");
+ chThdSleepMilliseconds(10);
+ break;
}
+ is31_read_register(page,j,&debug_temp);
+ xprintf("%02X, ", debug_temp);
+ chThdSleepMilliseconds(10);
+ }
- //Function Register
- xprintf("\n--FUNCTION--\n");
- chThdSleepMilliseconds(2);
- for(j=0;j<0x0D;j++) {
- is31_read_register(0x0B,j,&temp);
- switch(j) {
- case 0:
- xprintf("Config %02X", temp);
- chThdSleepMilliseconds(2);
- break;
- case 1:
- xprintf(" - Pict %02X\n", temp);
- chThdSleepMilliseconds(2);
- break;
- case 2:
- xprintf("Auto1 %02X", temp);
- chThdSleepMilliseconds(2);
- break;
- case 3:
- xprintf(" - Auto2 %02X\n", temp);
- chThdSleepMilliseconds(2);
- break;
- case 5:
- xprintf("Disp %02X", temp);
- chThdSleepMilliseconds(2);
- break;
- case 6:
- xprintf(" - Audio %02X\n", temp);
- chThdSleepMilliseconds(2);
- break;
- case 7:
- xprintf("Frame %02X", temp);
- chThdSleepMilliseconds(2);
- break;
- case 8:
- xprintf(" - Breath1 %02X\n", temp);
- chThdSleepMilliseconds(2);
- break;
- case 9:
- xprintf("Breath2 %02X - ", temp);
- chThdSleepMilliseconds(2);
- break;
- case 10:
- xprintf(" - Shut %02X\n", temp);
- chThdSleepMilliseconds(2);
- break;
- case 11:
- xprintf("AGC %02X", temp);
- chThdSleepMilliseconds(2);
- break;
- case 12:
- xprintf(" - ADC %02X\n", temp);
- chThdSleepMilliseconds(2);
- break;
- }
+ xprintf("\n--pwm--\n");
+ chThdSleepMilliseconds(10);
+ for(j=0x24;j<0xB4;j++) {
+ is31_read_register(page,j,&debug_temp);
+ xprintf("%02X, ", debug_temp);
+ chThdSleepMilliseconds(10);
+ if(j > 0x24 && (j-3) % 8 == 0){
+ xprintf("\n");
+ }
+ }
+ xprintf("\n");
+
+ //Function Register
+ xprintf("\n--FUNCTION--\n");
+ chThdSleepMilliseconds(10);
+ for(j=0;j<0x0D;j++) {
+ is31_read_register(0x0B,j,&debug_temp);
+ switch(j) {
+ case 0:
+ xprintf("Config %02X", debug_temp);
+ chThdSleepMilliseconds(2);
+ break;
+ case 1:
+ xprintf(" - Pict %02X\n", debug_temp);
+ chThdSleepMilliseconds(2);
+ break;
+ case 2:
+ xprintf("Auto1 %02X", debug_temp);
+ chThdSleepMilliseconds(2);
+ break;
+ case 3:
+ xprintf(" - Auto2 %02X\n", debug_temp);
+ chThdSleepMilliseconds(2);
+ break;
+ case 5:
+ xprintf("Disp %02X", debug_temp);
+ chThdSleepMilliseconds(2);
+ break;
+ case 6:
+ xprintf(" - Audio %02X\n", debug_temp);
+ chThdSleepMilliseconds(2);
+ break;
+ case 7:
+ xprintf("Frame %02X", debug_temp);
+ chThdSleepMilliseconds(2);
+ break;
+ case 8:
+ xprintf(" - Breath1 %02X\n", debug_temp);
+ chThdSleepMilliseconds(2);
+ break;
+ case 9:
+ xprintf("Breath2 %02X - ", debug_temp);
+ chThdSleepMilliseconds(2);
+ break;
+ case 10:
+ xprintf(" - Shut %02X\n", debug_temp);
+ chThdSleepMilliseconds(2);
+ break;
+ case 11:
+ xprintf("AGC %02X", debug_temp);
+ chThdSleepMilliseconds(2);
+ break;
+ case 12:
+ xprintf(" - ADC %02X\n", debug_temp);
+ chThdSleepMilliseconds(2);
+ break;
}
-#endif
}
}
@@ -523,7 +518,7 @@ void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint
//returns 2 bytes led control register address and byte to write
//0 - bit off, 1 - bit on, 2 - toggle bit
- uint8_t control_reg_addr, column_bit, column_byte, temp, blink_on;
+ uint8_t control_reg_addr, column_bit, column_byte, bit_temp, blink_on;
//check for valid led address
if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) {
@@ -541,18 +536,28 @@ void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint
//first byte is led control register address 0x00
//msg_led tens column is pin#, ones column is bit position in 8-bit mask
control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-register is every other byte
- xprintf("pre-reg_addr: %X\n", control_reg_addr);
+ xprintf("pre-reg_addr: %2X\n", control_reg_addr);
chThdSleepMilliseconds(10);
control_reg_addr += blink_on == 1 ? 0x12 : 0x00;//shift 12 bytes to blink register
- xprintf("blink-reg_addr: %X\n", control_reg_addr);
+ xprintf("blink-reg_addr: %2X\n", control_reg_addr);
+ chThdSleepMilliseconds(10);
+ xprintf("page: %2X\n", page);
chThdSleepMilliseconds(10);
- column_bit = 1<<(led_addr % 10 - 1);
- is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte
- column_byte = temp;
+ is31_read_register(page, 0x06, &bit_temp);//maintain status of leds on this byte
+ xprintf("reg 06: %2X\n", bit_temp);
+ is31_read_register(page, 0x17, &bit_temp);//maintain status of leds on this byte
+ xprintf("reg 17: %2X\n", bit_temp);
+ is31_read_register(page, 0x18, &bit_temp);//maintain status of leds on this byte
+ xprintf("reg 18: %2X\n", bit_temp);
+ is31_read_register(page, 0x19, &bit_temp);//maintain status of leds on this byte
+ xprintf("reg 19: %2X\n", bit_temp);
+ is31_read_register(page, control_reg_addr, &bit_temp);//maintain status of leds on this byte
+ column_bit = 1<<(led_addr % 10 - 1);
+ column_byte = bit_temp;
- xprintf("column_byte read: %X\n", column_byte);
+ xprintf("column_byte read: %2X\n", column_byte);
chThdSleepMilliseconds(10);
switch(action) {
case 0:
@@ -565,7 +570,7 @@ void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint
column_byte ^= column_bit;
break;
}
- xprintf("column_byte write: %X\n", column_byte);
+ xprintf("column_byte write: %2X\n", column_byte);
chThdSleepMilliseconds(10);
//return word to be written in register
@@ -574,47 +579,59 @@ void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint
}
void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte) {
- uint8_t led_control_word[2] = {0};//register address and led on/off mask
+ uint8_t led_control_word[2] = {0};//register address and on/off byte
led_control_word[0] = (row - 1 ) * 0x02;// A-register is every other byte
- led_control_word[1] = led_byte;// A-register is every other byte
- is31_write_data(page, led_control_word, 0x13);
+ led_control_word[1] = led_byte;
+ is31_write_data(page, led_control_word, 0x02);
}
void write_led_page (uint8_t page, uint8_t *user_led_array, uint8_t led_count) {
uint8_t i;
uint8_t pin, col;
- uint8_t led_control_register[0x13] = {0};//led control register start address + 0x12 bytes
+ uint8_t led_control_register[0x13] = {0};//control register start address + 0x12 bytes
__builtin_memset(led_control_register,0,13);
for(i=0;i<led_count;i++){
- pin = ((user_led_array[i] / 10) % 10 - 1 ) * 2 + 1;// 1 byte shift for led register 0x00 address
+ // 1 byte shift for led register 0x00 address
+ pin = ((user_led_array[i] / 10) % 10 - 1 ) * 2 + 1;
col = user_led_array[i] % 10 - 1;
-
led_control_register[pin] |= 1<<(col);
}
is31_write_data(page, led_control_register, 0x13);
}
-void set_lock_leds(uint8_t led_addr, uint8_t led_action) {
- uint8_t page, temp;
+void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
+ uint8_t lock_temp;
uint8_t led_control_word[2] = {0};
+ xprintf("---set lock---\n");
+ chThdSleepMilliseconds(10);
+
//blink if all leds are on
- //is31_read_register(0, 0x00, &temp);
- //if (temp != 0x00) {
- // set_led_bit(0,led_control_word,led_addr,(led_action | (1<<2))); //set blink bit
- //} else {
- // set_led_bit(0,led_control_word,led_addr,led_action);
- //}
- //is31_write_data(0, led_control_word, 0x02);
-
- for(page=1; page<8; page++) {
- set_led_bit(page,led_control_word,led_addr,led_action);
- is31_write_data(page, led_control_word, 0x02);
+ if (page == 0) {
+ is31_read_register(0, 0x00, &lock_temp);
+ xprintf("AllOnReg: %2X\n", lock_temp);
+ chThdSleepMilliseconds(10);
+ if (lock_temp == 0xFF) {
+ xprintf("AllOntrue\n");
+ chThdSleepMilliseconds(10);
+ led_action |= (1<<2); //set blink bit
+ } else {
+ xprintf("AllOnfalse\n");
+ chThdSleepMilliseconds(10);
+ }
}
+
+ set_led_bit(page,led_control_word,led_addr,led_action);
+
+ xprintf("led_word: %2X", led_control_word[0]);
+ xprintf("%X\n", led_control_word[1]);
+ chThdSleepMilliseconds(10);
+
+ is31_write_data(page, led_control_word, 0x02);
}
/* =====================
@@ -639,11 +656,11 @@ void led_controller_init(void) {
/* initialise IS31 chip */
is31_init();
- //set Display Option Register so all pwm intensity is controlled from Frame 0
+ //set Display Option Register so all pwm intensity is controlled from page 0
//enable blink and set blink period to 0.27s x rate
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_DISPLAYOPT, IS31_REG_DISPLAYOPT_INTENSITY_SAME + S31_REG_DISPLAYOPT_BLINK_ENABLE + 5);
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_DISPLAYOPT, IS31_REG_DISPLAYOPT_INTENSITY_SAME + IS31_REG_DISPLAYOPT_BLINK_ENABLE + 4);
- /* set full pwm on Frame 1 */
+ /* set full pwm on page 1 */
pwm_register_array[0] = 0;
__builtin_memset(pwm_register_array+1, 0xFF, 8);
for(i=0; i<8; i++) {