diff options
Diffstat (limited to 'keyboards/handwired/tractyl_manuform/5x6_right')
5 files changed, 43 insertions, 20 deletions
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h index 7fb97cd2a4..b2a240f9ff 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -31,22 +31,23 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW -#define USB_VBUS_PIN B10 +// #define USB_VBUS_PIN B10 // doesn't seem to work for me on one of my controllers... */ #define SPLIT_HAND_PIN C14 // high = left, low = right // WS2812 RGB LED strip input and number of LEDs #define RGB_DI_PIN A1 -#define WS2812_PWM_DRIVER PWMD5 // default: PWMD2 +#define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 #define WS2812_PWM_CHANNEL 2 // default: 2 -#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +#define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 //#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). -#define WS2812_DMA_STREAM STM32_DMA1_STREAM0 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -#define WS2812_DMA_CHANNEL 6 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. #define RGBLED_NUM 20 #define RGBLIGHT_SPLIT #define RGBLED_SPLIT \ { 10, 10 } +#define RGBLIGHT_LIMIT_VAL 80 #define DEBUG_LED_PIN C13 @@ -68,13 +69,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* i2c config for oleds */ #define I2C_DRIVER I2CD1 -#define I2C1_SCL_BANK GPIOB -#define I2C1_SDA_BANK GPIOB -#define I2C1_SCL 8 -#define I2C1_SDA 9 +#define I2C1_SCL_PIN B8 +#define I2C1_SDA_PIN B9 #define I2C1_SCL_PAL_MODE 4 #define I2C1_SDA_PAL_MODE 4 -#define I2C1_CLOCK_SPEED 400000 +// #define I2C1_CLOCK_SPEED 400000 +/* For Legacy Compatibility: */ +#define I2C1_SCL 8 +#define I2C1_SDA 9 /* encoder config */ #define ENCODERS_PAD_A \ @@ -93,7 +95,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* eeprom config */ #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 -#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 +#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64 // #define EXTERNAL_EEPROM_BYTE_COUNT 8196 // #define EXTERNAL_EEPROM_PAGE_SIZE 32 // #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 @@ -102,4 +104,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* pmw3360 config */ #define PMW3360_CS_PIN B0 #define PMW3360_SPI_MODE 3 -#define PMW3360_SPI_DIVISOR 4 +#define PMW3360_SPI_DIVISOR 64 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c index 394c597b84..700b0685f2 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c @@ -24,8 +24,10 @@ void matrix_scan_sub_kb(void) { } } +#ifdef USB_VBUS_PIN bool usb_vbus_state(void) { setPinInputLow(USB_VBUS_PIN); wait_us(5); return readPin(USB_VBUS_PIN); } +#endif diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h index 053f0aa517..d868eae48e 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h @@ -21,17 +21,35 @@ #undef STM32_I2C_USE_I2C1 #define STM32_I2C_USE_I2C1 TRUE -#undef STM32_PWM_USE_TIM5 -#define STM32_PWM_USE_TIM5 TRUE +#undef STM32_I2C_I2C1_RX_DMA_STREAM +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#undef STM32_I2C_I2C1_TX_DMA_STREAM +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) + +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE #undef STM32_PWM_USE_TIM3 #define STM32_PWM_USE_TIM3 TRUE #undef STM32_SPI_USE_SPI1 -#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI1 TRUE + +#undef STM32_SPI_SPI1_RX_DMA_STREAM +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#undef STM32_SPI_SPI1_TX_DMA_STREAM +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) #undef STM32_SERIAL_USE_USART2 #define STM32_SERIAL_USE_USART2 TRUE +#undef STM32_UART_USART2_RX_DMA_STREAM +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#undef STM32_UART_USART2_TX_DMA_STREAM +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) + #undef STM32_GPT_USE_TIM4 #define STM32_GPT_USE_TIM4 TRUE + +#undef STM32_ST_USE_TIMER +#define STM32_ST_USE_TIMER 5 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md index 4571e18045..6377613814 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md @@ -4,11 +4,12 @@ * Split Hand Pin, using PC14 * Full Duplex Serial/USART using PA3 and PA4 on USART2 * PWM Audio using PB1 and TIM3 and GPT on TIM4 -* PWM RGB using PA1 TIM5 +* PWM RGB using PA1 TIM2 * pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin * 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin -* Encoder using PA10 and PA12 +* Encoder using PA13 and PA14 * SSD1306 OLED display (128x64) using PB8-PB9 on I2C1 +* Pull-up resistor (22k) on A10 to fix reset issue. * Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna) * Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/) diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c index 67842c26d0..f209206337 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c @@ -117,8 +117,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT_5x6_right_wrapper( KC_MAKE, ___________________BLANK___________________, _________________ADJUST_R1_________________, KC_RST, VRSN, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, EEP_RST, - UC_MOD, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS, - _______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY, + _______, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS, + UC_MOD, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY, HPT_DWLI, HPT_DWLD, TG_GAME, TG_DBLO, HPT_TOG, HPT_BUZ, KC_NUKE, _______, _______, _______, @@ -350,7 +350,7 @@ void render_kitty(void) { // assumes 1 frame prep stage extern bool swap_hands; void animation_phase(void) { - if (swap_hands) { + if (tap_toggling) { anim_frame_duration = 300; current_rtogi_frame = (current_rtogi_frame + 1) % RTOGI_FRAMES; oled_write_raw_P(rtogi[abs((RTOGI_FRAMES - 1) - current_rtogi_frame)], ANIM_SIZE); |