diff options
Diffstat (limited to 'keyboards/handwired/tractyl_manuform/5x6_right')
7 files changed, 61 insertions, 20 deletions
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h index 93ca121590..0e5b72c56b 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -24,7 +24,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS \ { A15, B3, B4, B5, B6, B7 } #define MATRIX_ROW_PINS \ - { B12, B13, B14, B15, A8, A9 } + { B12, B13, B14, B15, A8, A10 } + +#define UNUSED_PINS \ + { C15 } +// B2 used for BOOT1, has internal pull down? +// A9 has internal pull-down +// A11 and A12 are used for USB sense. DO NOT USE. #define DIODE_DIRECTION COL2ROW @@ -45,12 +51,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLED_SPLIT \ { 10, 10 } -#define DEBUG_LED_PIN C13 +#define DEBUG_LED_PIN C13 -#define AUDIO_PIN A0 -#define AUDIO_PWM_DRIVER PWMD5 -#define AUDIO_PWM_CHANNEL 1 -#define AUDIO_STATE_TIMER GPTD4 +/* Audio config */ +#define AUDIO_PIN B1 +#define AUDIO_PWM_DRIVER PWMD3 +#define AUDIO_PWM_CHANNEL 4 +#define AUDIO_PWM_PAL_MODE 2 +#define AUDIO_STATE_TIMER GPTD4 /* serial.c configuration for split keyboard */ #define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. @@ -60,10 +68,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 #define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 #define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 -#undef SOFT_SERIAL_PIN - -// #define EE_HANDS +/* i2c config for oleds */ #define I2C_DRIVER I2CD1 #define I2C1_SCL_BANK GPIOB #define I2C1_SDA_BANK GPIOB @@ -73,11 +79,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define I2C1_SDA_PAL_MODE 4 #define I2C1_CLOCK_SPEED 400000 +/* encoder config */ #define ENCODERS_PAD_A \ - { B1 } + { A13 } #define ENCODERS_PAD_B \ - { B2 } + { A14 } +/* spi config for eeprom and pmw3360 sensor */ #define SPI_DRIVER SPID1 #define SPI_SCK_PIN A5 #define SPI_SCK_PAL_MODE 5 @@ -86,6 +94,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SPI_MISO_PIN A6 #define SPI_MISO_PAL_MODE 5 +/* eeprom config */ #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 #define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // #define EXTERNAL_EEPROM_BYTE_COUNT 8196 @@ -93,6 +102,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 // #define DEBUG_EEPROM_OUTPUT +/* pmw3360 config */ #define PMW3360_CS_PIN B0 #define PMW3360_SPI_MODE 3 #define PMW3360_SPI_DIVISOR 4 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h index 94f4aff83c..fb835e8ee2 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h @@ -15,7 +15,6 @@ */ #pragma once -// #define HAL_USE_DAC TRUE #define HAL_USE_PWM TRUE #define HAL_USE_SERIAL TRUE #define HAL_USE_I2C TRUE diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h index 0f58208ccb..053f0aa517 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h @@ -24,11 +24,14 @@ #undef STM32_PWM_USE_TIM5 #define STM32_PWM_USE_TIM5 TRUE -#undef STM32_GPT_USE_TIM4 -#define STM32_GPT_USE_TIM4 TRUE +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE #undef STM32_SPI_USE_SPI1 #define STM32_SPI_USE_SPI1 TRUE #undef STM32_SERIAL_USE_USART2 #define STM32_SERIAL_USE_USART2 TRUE + +#undef STM32_GPT_USE_TIM4 +#define STM32_GPT_USE_TIM4 TRUE diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md new file mode 100644 index 0000000000..4571e18045 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md @@ -0,0 +1,24 @@ +# Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball + +* VBUS mod, using PB10 +* Split Hand Pin, using PC14 +* Full Duplex Serial/USART using PA3 and PA4 on USART2 +* PWM Audio using PB1 and TIM3 and GPT on TIM4 +* PWM RGB using PA1 TIM5 +* pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin +* 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin +* Encoder using PA10 and PA12 +* SSD1306 OLED display (128x64) using PB8-PB9 on I2C1 + +* Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna) +* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/) + +Make example for this keyboard (after setting up your build environment): + + make handwired/tractyl_manuform/5x6_right/f411:default + +Flashing example for this keyboard: + + make handwired/tractyl_manuform/5x6_right/f411:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c index ac4999161b..81de8b2894 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c @@ -142,8 +142,14 @@ const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = { [_LOWER] = { { RGB_MOD, RGB_RMOD}, { RGB_HUD, RGB_HUI } }, [_ADJUST] = { { CK_DOWN, CK_UP }, { _______, _______ } }, }; +// clang-format on #else bool encoder_update_user(uint8_t index, bool clockwise) { +# ifdef SWAP_HANDS_ENABLE + if (swap_hands) { + index ^= 1; + } +# endif if (index == 0) { tap_code_delay(clockwise ? KC_VOLD : KC_VOLU, 5); } else if (index == 1) { @@ -152,7 +158,6 @@ bool encoder_update_user(uint8_t index, bool clockwise) { return false; } #endif -// clang-format on #ifdef POINTING_DEVICE_ENABLE static uint16_t mouse_timer = 0; diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/rules.mk index b123ce1a85..9b9032837e 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/rules.mk +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/rules.mk @@ -5,7 +5,7 @@ HAPTIC_ENABLE = no COMMAND_ENABLE = no TAP_DANCE_ENABLE = yes UNICODE_ENABLE = yes -OLED_ENABLE = yes +OLED_ENABLE = yes WPM_ENABLE = yes ENCODER_ENABLE = yes ENCODER_MAP_ENABLE = yes diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/readme.md index b6e38dc845..bfb142347c 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/readme.md +++ b/keyboards/handwired/tractyl_manuform/5x6_right/readme.md @@ -1,8 +1,8 @@ -# Drashna's Dactyl Manuform (5x6) with a right side trackball +# Drashna's Tractyl Manuform (5x6) with a right side trackball  -It's a Dactyl Manuform with an integrated thumb based trackball, using the pmw3360 optical sensor. +It's a Tractyl Manuform with an integrated thumb based trackball, using the pmw3360 optical sensor. It's powered by 2x Teensy++ 2.0's, using Drashna's [Teensy VBUS Hack](https://docs.qmk.fm/#/feature_split_keyboard?id=hardware-considerations-and-mods) for better detection. @@ -12,10 +12,10 @@ It's powered by 2x Teensy++ 2.0's, using Drashna's [Teensy VBUS Hack](https://do Make example for this keyboard (after setting up your build environment): - make handwired/dactyl_manuform/5x6_right_trackball:default + make handwired/tractyl_manuform/5x6_right:default Flashing example for this keyboard: - make handwired/dactyl_manuform/5x6_right_trackball:default:flash + make handwired/tractyl_manuform/5x6_right:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |