diff options
Diffstat (limited to 'keyboards/dtisaac')
19 files changed, 786 insertions, 0 deletions
diff --git a/keyboards/dtisaac/dosa40rgb/config.h b/keyboards/dtisaac/dosa40rgb/config.h new file mode 100644 index 0000000000..52891c4aa5 --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/config.h @@ -0,0 +1,73 @@ +/* +Copyright 2021 DTIsaac + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4454 // DT +#define PRODUCT_ID 0x4973 // Is +#define DEVICE_VER 0x0004 +#define MANUFACTURER DTIsaac +#define PRODUCT >_Dosa40 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 11 + +/* AdafruitBle Pin */ +#define AdafruitBleResetPin D4 +#define AdafruitBleCSPin B4 +#define AdafruitBleIRQPin E6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B7, D7, F1, F0 } +#define MATRIX_COL_PINS { D1, D6, D3, D2, B6, C6, C7, F7, F6, F5, F4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#ifdef RGB_MATRIX_ENABLE +#define RGB_DI_PIN D0 +#define DRIVER_LED_TOTAL 42 +#define RGB_MATRIX_KEYPRESSES // reacts to keypresses +#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION
\ No newline at end of file diff --git a/keyboards/dtisaac/dosa40rgb/dosa40rgb.c b/keyboards/dtisaac/dosa40rgb/dosa40rgb.c new file mode 100644 index 0000000000..c46bfc291d --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/dosa40rgb.c @@ -0,0 +1,39 @@ +/* Copyright 2021 DTIsaac + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "dosa40rgb.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + //Key Matrix to LED Index + {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10}, + {22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12 }, + {23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33}, + {41, 40, 39, NO_LED, 38, NO_LED, 37, 36, 35, 34, 11} +}, { + //LED Index to Physical Positon + { 0, 0}, { 20, 0}, { 40, 0 }, { 61, 0 }, { 81, 0}, { 101, 0}, { 122, 0}, { 142, 0}, { 162, 0}, { 183, 0}, { 203, 0}, { 224, 0}, + {203, 21}, {183, 21}, {162,21 }, {142, 21}, {122,21}, { 101,21}, { 81 ,21}, { 61 ,21}, { 40 ,21}, { 20 ,21}, { 0 ,21}, + { 0, 42}, { 20, 42}, { 40,42 }, { 61, 42}, { 81,42}, { 101,42}, { 122,42}, { 142,42}, { 162,42}, { 183,42}, { 203,42}, + {203, 64}, {183, 64}, {162,64 }, {122, 64}, { 81,64}, { 40, 64}, { 20, 64}, { 0, 64}, +}, { + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 1, 1, 1, 1, 1, 1, 1, +} }; + +#endif
\ No newline at end of file diff --git a/keyboards/dtisaac/dosa40rgb/dosa40rgb.h b/keyboards/dtisaac/dosa40rgb/dosa40rgb.h new file mode 100644 index 0000000000..261fb7c463 --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/dosa40rgb.h @@ -0,0 +1,40 @@ +/* Copyright 2021 DTIsaac + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k41, \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, \ + k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, k32, \ + k33, k34, k35, k36, k37, k38, k39, k40 \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10}, \ + {k11, k12, k13, k14, k15, k16, k17, k18, k19, k20, k21}, \ + {k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, k32}, \ + {k33, k34, k35, KC_NO,k36, KC_NO, k37, k38, k39, k40, k41}, \ +}
\ No newline at end of file diff --git a/keyboards/dtisaac/dosa40rgb/info.json b/keyboards/dtisaac/dosa40rgb/info.json new file mode 100644 index 0000000000..2feed40d42 --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/info.json @@ -0,0 +1,53 @@ +{ + "keyboard_name": ">_Dosa40rgb", + "url": "", + "maintainer": "DTIsaac", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"Q", "x":1, "y":0}, + {"label":"W", "x":2, "y":0}, + {"label":"E", "x":3, "y":0}, + {"label":"R", "x":4, "y":0}, + {"label":"T", "x":5, "y":0}, + {"label":"Y", "x":6, "y":0}, + {"label":"U", "x":7, "y":0}, + {"label":"I", "x":8, "y":0}, + {"label":"O", "x":9, "y":0}, + {"label":"P", "x":10, "y":0}, + {"label":"BSPC", "x":11, "y":0}, + {"label":"Caps Lock", "x":0, "y":1, "w":1.5}, + {"label":"A", "x":1.5, "y":1}, + {"label":"S", "x":2.5, "y":1}, + {"label":"D", "x":3.5, "y":1}, + {"label":"F", "x":4.5, "y":1}, + {"label":"G", "x":5.5, "y":1}, + {"label":"H", "x":6.5, "y":1}, + {"label":"J", "x":7.5, "y":1}, + {"label":"K", "x":8.5, "y":1}, + {"label":"L", "x":9.5, "y":1}, + {"label":"Enter", "x":10.5, "y":1, "w":1.5}, + {"label":"Shift", "x":0, "y":2, "w":1.75}, + {"label":"Z", "x":1.75, "y":2}, + {"label":"X", "x":2.75, "y":2}, + {"label":"C", "x":3.75, "y":2}, + {"label":"V", "x":4.75, "y":2}, + {"label":"B", "x":5.75, "y":2}, + {"label":"N", "x":6.75, "y":2}, + {"label":"M", "x":7.75, "y":2}, + {"label":",", "x":8.75, "y":2}, + {"label":".", "x":9.75, "y":2}, + {"label":"Shift", "x":10.75, "y":2, "w":1.25}, + {"label":"Ctrl", "x":0, "y":3, "w":1.25}, + {"label":"Win", "x":1.25, "y":3, "w":1}, + {"label":"Alt", "x":2.25, "y":3, "w":1.25}, + {"label":"Space", "x":3.5, "y":3, "w":2.25}, + {"label":"Space", "x":5.75, "y":3, "w":2.75}, + {"label":"App", "x":8.5, "y":3, "w":1.25}, + {"label":"Fn", "x":9.75, "y":3, "w":1}, + {"label":"Ctrl", "x":10.75, "y":3, "w":1.25} + ] + } + } +}
\ No newline at end of file diff --git a/keyboards/dtisaac/dosa40rgb/keymaps/default/keymap.c b/keyboards/dtisaac/dosa40rgb/keymaps/default/keymap.c new file mode 100644 index 0000000000..c9bde4bb8d --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/keymaps/default/keymap.c @@ -0,0 +1,122 @@ +/* Copyright 2021 DTIsaac + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H +#include "spi_master.h" +#include "wait.h" + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _L1, + _L2 +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + BASE, + L1, + BLE_DIS, // Disconnect BLE + LED_EN, // Toggle LED +}; + +#define L1 MO(_L1) +const uint8_t cm1[] = "AT+GAPSTOPADV"; +const uint8_t cm2[] = "AT+GAPDISCONNECT"; +const uint8_t cm3[] = "ATZ"; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + LT(_L2,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_SPACE, KC_RALT, L1, KC_RCTL + ), + [_L1] = LAYOUT( + RESET, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_SCLN, KC_QUOT, + KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_SLSH, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_L2] = LAYOUT( + LED_EN, RGB_RMOD, KC_UP, RGB_MOD, RGB_HUI, RGB_VAI, RGB_SAI, RGB_SPI, KC_TRNS, OUT_USB, OUT_BT, BLE_DIS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, RGB_HUD, RGB_VAD, RGB_SAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_BSLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TAB, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + +void rgb_matrix_indicators_user(void) +{ + if (host_keyboard_led_state().caps_lock) + { + rgb_matrix_set_color(22, 200, 200, 200); + } + if (IS_LAYER_ON(_L1)) + { + rgb_matrix_set_color(35, 0, 200, 200); + } + if (IS_LAYER_ON(_L2)) + { + rgb_matrix_set_color(22, 200, 0, 200); + } +} + +void sdep_send(const uint8_t *cmd, uint8_t len) { + + spi_start(AdafruitBleCSPin, false, 0, 2); + uint8_t cnt = 200; + bool ready = false; + + do { + ready = spi_write(0x10) != 0xFE; + if (ready) { + break; + } + spi_stop(); + wait_us(25); + spi_start(AdafruitBleCSPin, false, 0, 2); + } while (cnt--); + + if (ready) { + spi_write(0x00); + spi_write(0x0A); + spi_write(len); + spi_transmit(cmd, len); + } + + spi_stop(); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + switch (keycode) { + case LED_EN: + if (record->event.pressed) { + DDRB = DDRB ^ 0x20; + PORTB &= ~(1 << 5); + } + return false; + case BLE_DIS: + if (record->event.pressed) { + sdep_send(cm1,sizeof(cm1)); + sdep_send(cm2,sizeof(cm2)); + sdep_send(cm3,sizeof(cm3)); + } + return false; + } + return true; +}
\ No newline at end of file diff --git a/keyboards/dtisaac/dosa40rgb/keymaps/default/readme.md b/keyboards/dtisaac/dosa40rgb/keymaps/default/readme.md new file mode 100644 index 0000000000..35494635d8 --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for dosa40rgb diff --git a/keyboards/dtisaac/dosa40rgb/readme.md b/keyboards/dtisaac/dosa40rgb/readme.md new file mode 100644 index 0000000000..189dc7b9bc --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/readme.md @@ -0,0 +1,25 @@ +# dosa40rgb + + + +A 40 percent keyboard dosa40rgb Bluetooth Low Energy + +* Keyboard Maintainer: [DTIsaac](https://github.com/daotakisaac) +* Hardware Supported: ATmega32U4 + AdafruitBLE SPI + +Make example for this keyboard (after setting up your build environment): + + make dtisaac/dosa40rgb:default + +Flashing example for this keyboard: + + make dtisaac/dosa40rgb:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/dtisaac/dosa40rgb/rules.mk b/keyboards/dtisaac/dosa40rgb/rules.mk new file mode 100644 index 0000000000..0440ff20b4 --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = lufa-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +BLUETOOTH = AdafruitBLE # Enable Bluetooth +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812
\ No newline at end of file diff --git a/keyboards/dtisaac/dtisaac01/config.h b/keyboards/dtisaac/dtisaac01/config.h new file mode 100644 index 0000000000..f417d64499 --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/config.h @@ -0,0 +1,95 @@ +/* +Copyright 2021 DTIsaac + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4454 +#define PRODUCT_ID 0x4973 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DTIsaac +#define PRODUCT dtisaac01 + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 9 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { F7, F6, F5, F4, F1, B4, D2, B2, B1, B3, D4, D6 } +#define MATRIX_COL_PINS { C7, C6, D0, B5, F0, D7, B0, B7, D1 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +#define LED_CAPS_LOCK_PIN D3 +#define LED_SCROLL_LOCK_PIN D5 +#define LED_PIN_ON_STATE 0 + + +#define BACKLIGHT_PIN B6 +#define BACKLIGHT_LEVELS 3 +#define BACKLIGHT_BREATHING + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable these deprecated features by default */ +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/dtisaac/dtisaac01/dtisaac01.c b/keyboards/dtisaac/dtisaac01/dtisaac01.c new file mode 100644 index 0000000000..b11920280f --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/dtisaac01.c @@ -0,0 +1,17 @@ +/* Copyright 2021 DTIsaac + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "dtisaac01.h" diff --git a/keyboards/dtisaac/dtisaac01/dtisaac01.h b/keyboards/dtisaac/dtisaac01/dtisaac01.h new file mode 100644 index 0000000000..e017c65700 --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/dtisaac01.h @@ -0,0 +1,49 @@ +/* Copyright 2021 DTIsaac + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K058, K061, K062, K063, K064, K065, K066, \ + K010, K011, K012, K013, K014, K015, K016, K017, K018, K068, K060, K071, K072, K073, K074, K075, K076, \ + K020, K021, K022, K023, K024, K025, K026, K027, K028, K078, K070, K081, K082, K083, K084, K085, K086, \ + K030, K031, K032, K033, K034, K035, K036, K037, K038, K088, K080, K091, K093, \ + K040, K042, K043, K044, K045, K046, K047, K048, K098, K090, K101, K103, K105, \ + K050, K051, K052, K056, K100, K111, K112, K113, K114, K115, K116 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \ + { K010, K011, K012, K013, K014, K015, K016, K017, K018 }, \ + { K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \ + { K030, K031, K032, K033, K034, K035, K036, K037, K038 }, \ + { K040, KC_NO, K042, K043, K044, K045, K046, K047, K048 }, \ + { K050, K051, K052, KC_NO, KC_NO, KC_NO, K056, KC_NO, K058 }, \ + { K060, K061, K062, K063, K064, K065, K066, KC_NO, K068 }, \ + { K070, K071, K072, K073, K074, K075, K076, KC_NO, K078 }, \ + { K080, K081, K082, K083, K084, K085, K086, KC_NO, K088 }, \ + { K090, K091, KC_NO, K093, KC_NO, KC_NO, KC_NO, KC_NO, K098 }, \ + { K100, K101, KC_NO, K103, KC_NO, K105, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, K111, K112, K113, K114, K115, K116, KC_NO, KC_NO } \ +} diff --git a/keyboards/dtisaac/dtisaac01/info.json b/keyboards/dtisaac/dtisaac01/info.json new file mode 100644 index 0000000000..bf3582d2a2 --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/info.json @@ -0,0 +1,98 @@ +{ + "keyboard_name": "dtisaac01", + "url": "", + "maintainer": "DTIsaac", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"K000", "x":0, "y":0}, + {"label":"K001", "x":2, "y":0}, + {"label":"K002", "x":3, "y":0}, + {"label":"K003", "x":4, "y":0}, + {"label":"K004", "x":5, "y":0}, + {"label":"K005", "x":6.5, "y":0}, + {"label":"K006", "x":7.5, "y":0}, + {"label":"K007", "x":8.5, "y":0}, + {"label":"K008", "x":9.5, "y":0}, + {"label":"K058", "x":11, "y":0}, + {"label":"K061", "x":12, "y":0}, + {"label":"K062", "x":13, "y":0}, + {"label":"K063", "x":14, "y":0}, + {"label":"K064", "x":15.25, "y":0}, + {"label":"K065", "x":16.25, "y":0}, + {"label":"K066", "x":17.25, "y":0}, + {"label":"K010", "x":0, "y":1.5}, + {"label":"K011", "x":1, "y":1.5}, + {"label":"K012", "x":2, "y":1.5}, + {"label":"K013", "x":3, "y":1.5}, + {"label":"K014", "x":4, "y":1.5}, + {"label":"K015", "x":5, "y":1.5}, + {"label":"K016", "x":6, "y":1.5}, + {"label":"K017", "x":7, "y":1.5}, + {"label":"K018", "x":8, "y":1.5}, + {"label":"K068", "x":9, "y":1.5}, + {"label":"K060", "x":10, "y":1.5}, + {"label":"K071", "x":11, "y":1.5}, + {"label":"K072", "x":12, "y":1.5}, + {"label":"K073", "x":13, "y":1.5, "w":2}, + {"label":"K074", "x":15.25, "y":1.5}, + {"label":"K075", "x":16.25, "y":1.5}, + {"label":"K076", "x":17.25, "y":1.5}, + {"label":"K020", "x":0, "y":2.5, "w":1.5}, + {"label":"K021", "x":1.5, "y":2.5}, + {"label":"K022", "x":2.5, "y":2.5}, + {"label":"K023", "x":3.5, "y":2.5}, + {"label":"K024", "x":4.5, "y":2.5}, + {"label":"K025", "x":5.5, "y":2.5}, + {"label":"K026", "x":6.5, "y":2.5}, + {"label":"K027", "x":7.5, "y":2.5}, + {"label":"K028", "x":8.5, "y":2.5}, + {"label":"K078", "x":9.5, "y":2.5}, + {"label":"K070", "x":10.5, "y":2.5}, + {"label":"K081", "x":11.5, "y":2.5}, + {"label":"K082", "x":12.5, "y":2.5}, + {"label":"K083", "x":13.5, "y":2.5, "w":1.5}, + {"label":"K084", "x":15.25, "y":2.5}, + {"label":"K085", "x":16.25, "y":2.5}, + {"label":"K086", "x":17.25, "y":2.5}, + {"label":"K030", "x":0, "y":3.5, "w":1.75}, + {"label":"K031", "x":1.75, "y":3.5}, + {"label":"K032", "x":2.75, "y":3.5}, + {"label":"K033", "x":3.75, "y":3.5}, + {"label":"K034", "x":4.75, "y":3.5}, + {"label":"K035", "x":5.75, "y":3.5}, + {"label":"K036", "x":6.75, "y":3.5}, + {"label":"K037", "x":7.75, "y":3.5}, + {"label":"K038", "x":8.75, "y":3.5}, + {"label":"K088", "x":9.75, "y":3.5}, + {"label":"K080", "x":10.75, "y":3.5}, + {"label":"K091", "x":11.75, "y":3.5}, + {"label":"K093", "x":12.75, "y":3.5, "w":2.25}, + {"label":"K040", "x":0, "y":4.5, "w":2.25}, + {"label":"K042", "x":2.25, "y":4.5}, + {"label":"K043", "x":3.25, "y":4.5}, + {"label":"K044", "x":4.25, "y":4.5}, + {"label":"K045", "x":5.25, "y":4.5}, + {"label":"K046", "x":6.25, "y":4.5}, + {"label":"K047", "x":7.25, "y":4.5}, + {"label":"K048", "x":8.25, "y":4.5}, + {"label":"K098", "x":9.25, "y":4.5}, + {"label":"K090", "x":10.25, "y":4.5}, + {"label":"K101", "x":11.25, "y":4.5}, + {"label":"K103", "x":12.25, "y":4.5, "w":2.75}, + {"label":"K105", "x":16.25, "y":4.5}, + {"label":"K050", "x":0, "y":5.5, "w":1.25}, + {"label":"K051", "x":1.25, "y":5.5, "w":1.25}, + {"label":"K052", "x":2.5, "y":5.5, "w":1.25}, + {"label":"K056", "x":3.75, "y":5.5, "w":6.25}, + {"label":"K100", "x":10, "y":5.5, "w":1.25}, + {"label":"K111", "x":11.25, "y":5.5, "w":1.25}, + {"label":"K112", "x":12.5, "y":5.5, "w":1.25}, + {"label":"K113", "x":13.75, "y":5.5, "w":1.25} + {"label":"K114", "x":15.25, "y":5.5}, + {"label":"K115", "x":16.25, "y":5.5}, + {"label":"K116", "x":17.25, "y":5.5}, + ] + } + } +} diff --git a/keyboards/dtisaac/dtisaac01/keymaps/default/keymap.c b/keyboards/dtisaac/dtisaac01/keymaps/default/keymap.c new file mode 100644 index 0000000000..15d0f2374a --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/keymaps/default/keymap.c @@ -0,0 +1,47 @@ +/* Copyright 2021 DTIsaac + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(1, KC_NO), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN] = LAYOUT( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +};
\ No newline at end of file diff --git a/keyboards/dtisaac/dtisaac01/keymaps/default/readme.md b/keyboards/dtisaac/dtisaac01/keymaps/default/readme.md new file mode 100644 index 0000000000..0407ae2339 --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for dtisaac01 diff --git a/keyboards/dtisaac/dtisaac01/keymaps/via/keymap.c b/keyboards/dtisaac/dtisaac01/keymaps/via/keymap.c new file mode 100644 index 0000000000..2f61c803f7 --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/keymaps/via/keymap.c @@ -0,0 +1,59 @@ +/* Copyright 2021 DTIsaac + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layers { + _LAYER0, + _LAYER1, + _LAYER2, + _LAYER3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(1, KC_NO), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [_LAYER1] = LAYOUT( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_SLEP, KC_WAKE, KC_PWR, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, BL_ON, BL_INC, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_BRTG, BL_OFF, BL_DEC, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT + ), + [_LAYER2] = LAYOUT( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_LAYER3] = LAYOUT( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +};
\ No newline at end of file diff --git a/keyboards/dtisaac/dtisaac01/keymaps/via/readme.md b/keyboards/dtisaac/dtisaac01/keymaps/via/readme.md new file mode 100644 index 0000000000..0407ae2339 --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/keymaps/via/readme.md @@ -0,0 +1 @@ +# The default keymap for dtisaac01 diff --git a/keyboards/dtisaac/dtisaac01/keymaps/via/rules.mk b/keyboards/dtisaac/dtisaac01/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/dtisaac/dtisaac01/readme.md b/keyboards/dtisaac/dtisaac01/readme.md new file mode 100644 index 0000000000..bf37c4dd2e --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/readme.md @@ -0,0 +1,19 @@ +# dtisaac01 + + + +A 87 percent keyboard DTIsaac01 version + +* Keyboard Maintainer: [DTIsaac](https://github.com/daotakisaac) +* Hardware Supported: dtisaac01-atmega32U4 +* Hardware Availability: dtisaac01-atmega32U4 + +Make example for this keyboard (after setting up your build environment): + + make dtisaac01:default + +Flashing example for this keyboard: + + make dtisaac01:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/dtisaac/dtisaac01/rules.mk b/keyboards/dtisaac/dtisaac01/rules.mk new file mode 100644 index 0000000000..dc64cef323 --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output |