5 files changed, 18 insertions, 18 deletions
diff --git a/keyboards/converter/ibm_terminal/config.h b/keyboards/converter/ibm_terminal/config.h
index 4dd85f6983..ba9ec82fa2 100644
--- a/keyboards/converter/ibm_terminal/config.h
+++ b/keyboards/converter/ibm_terminal/config.h
@@ -39,11 +39,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* key combination for command */
 #define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL)) \
+    get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL)) \
 )
 
 
-/* 
+/*
  * PS/2 USART configuration for ATMega32U4
  */
 #ifdef PS2_USE_USART
diff --git a/keyboards/converter/m0110_usb/config.h b/keyboards/converter/m0110_usb/config.h
index 79abb9a889..02e4c30fb0 100644
--- a/keyboards/converter/m0110_usb/config.h
+++ b/keyboards/converter/m0110_usb/config.h
@@ -39,8 +39,8 @@ Ported to QMK by Techsock <info@techsock.com>
 
 /* magic key */
 #define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LGUI)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LCTL)) \
+    get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LGUI)) || \
+    get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LCTL)) \
 )
 
 /* boot magic key */
diff --git a/keyboards/converter/palm_usb/config.h b/keyboards/converter/palm_usb/config.h
index 4520725a1d..4233a53ef0 100644
--- a/keyboards/converter/palm_usb/config.h
+++ b/keyboards/converter/palm_usb/config.h
@@ -34,19 +34,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // IO pins to serial
 // https://deskthority.net/wiki/Arduino_Pro_Micro for pin lookup
-#define VCC_PIN D1 // pro micro 2 
+#define VCC_PIN D1 // pro micro 2
 #define RX_PIN   D0 //pro micro 3 , was 8 on cy384
 #define RTS_PIN  C6 // 5  //[ was D4 // 4 on the cy384
-#define DCD_PIN  E6  //7 
+#define DCD_PIN  E6  //7
 
 // if using the particular arduino pinout of CY384
-#ifdef CY384 
+#ifdef CY384
     #define GND_PIN  D7 //6
     #define PULLDOWN_PIN  B1 // 15
 #endif
 
 #ifndef HANDSPRING
-// Set to 1 for Handspring or to disable RTS/DCD based handshake. 
+// Set to 1 for Handspring or to disable RTS/DCD based handshake.
     #define HANDSPRING 0
 #endif
 
@@ -59,9 +59,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* key combination for command */
 #define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+    get_mods() == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
+    get_mods() == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
+    get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
 
@@ -74,10 +74,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SERIAL_SOFT_BIT_ORDER_LSB
 #if (HANDSPRING == 0)
     #define SERIAL_SOFT_LOGIC_NEGATIVE  //RS232 logic
-#endif 
+#endif
 /* RXD Port */
 #define SERIAL_SOFT_RXD_ENABLE
-    
+
 // we are using Pro micro pin 3 / D0 as serial
 #define SERIAL_SOFT_RXD_DDR         DDRD
 #define SERIAL_SOFT_RXD_PORT        PORTD
diff --git a/keyboards/converter/sun_usb/config.h b/keyboards/converter/sun_usb/config.h
index f7ad416393..7713e0a915 100644
--- a/keyboards/converter/sun_usb/config.h
+++ b/keyboards/converter/sun_usb/config.h
@@ -33,9 +33,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* key combination for command */
 #define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+    get_mods() == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
+    get_mods() == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
+    get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
 
diff --git a/keyboards/converter/xt_usb/config.h b/keyboards/converter/xt_usb/config.h
index 963a3c6396..ecebc123fa 100644
--- a/keyboards/converter/xt_usb/config.h
+++ b/keyboards/converter/xt_usb/config.h
@@ -31,8 +31,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* key combination for command */
 #define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
+    get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) || \
+    get_mods() == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
 )