diff options
Diffstat (limited to 'keyboards/converter/palm_usb/config.h')
| -rw-r--r-- | keyboards/converter/palm_usb/config.h | 120 |
1 files changed, 120 insertions, 0 deletions
diff --git a/keyboards/converter/palm_usb/config.h b/keyboards/converter/palm_usb/config.h new file mode 100644 index 0000000000..4520725a1d --- /dev/null +++ b/keyboards/converter/palm_usb/config.h @@ -0,0 +1,120 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* This code makes use of cy384's Arduino USB HID adapter for the Palm Portable + Keyboard, released under the BSD licence */ + + + + +#pragma once + +#define CUSTOM_MATRIX 2 + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0100 +#define MANUFACTURER QMK +#define PRODUCT Stowaway converter +#define DESCRIPTION USB converter for Stowaway keyboard + +// IO pins to serial +// https://deskthority.net/wiki/Arduino_Pro_Micro for pin lookup +#define VCC_PIN D1 // pro micro 2 +#define RX_PIN D0 //pro micro 3 , was 8 on cy384 +#define RTS_PIN C6 // 5 //[ was D4 // 4 on the cy384 +#define DCD_PIN E6 //7 + +// if using the particular arduino pinout of CY384 +#ifdef CY384 + #define GND_PIN D7 //6 + #define PULLDOWN_PIN B1 // 15 +#endif + +#ifndef HANDSPRING +// Set to 1 for Handspring or to disable RTS/DCD based handshake. + #define HANDSPRING 0 +#endif + +#define MAXDROP 10 // check if keyboard is connected every X polling cycles +#define SLEEP_TIMEOUT 500000 // check keyboard/reset this many millis + + +#define MATRIX_ROWS 12 +#define MATRIX_COLS 8 + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \ + keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + +/* Serial(USART) configuration + * asynchronous, negative logic, 9600baud, no flow control + * 1-start bit, 8-data bit, non parity, 1-stop bit + */ +#define SERIAL_SOFT_BAUD 9600 +#define SERIAL_SOFT_PARITY_NONE +#define SERIAL_SOFT_BIT_ORDER_LSB +#if (HANDSPRING == 0) + #define SERIAL_SOFT_LOGIC_NEGATIVE //RS232 logic +#endif +/* RXD Port */ +#define SERIAL_SOFT_RXD_ENABLE + +// we are using Pro micro pin 3 / D0 as serial +#define SERIAL_SOFT_RXD_DDR DDRD +#define SERIAL_SOFT_RXD_PORT PORTD +#define SERIAL_SOFT_RXD_PIN PIND +#define SERIAL_SOFT_RXD_BIT 0 +#define SERIAL_SOFT_RXD_VECT INT0_vect + +/* RXD Interupt */ +#define SERIAL_SOFT_RXD_INIT() do { \ + /* pin configuration: input with pull-up */ \ + SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \ + SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \ + /* enable interrupt: INT0(rising edge) */ \ + EICRA |= ((1<<ISC01)|(1<<ISC00)); \ + EIMSK |= (1<<INT0); \ + sei(); \ +} while (0) +#define SERIAL_SOFT_RXD_INT_ENTER() +#define SERIAL_SOFT_RXD_INT_EXIT() do { \ + /* clear interrupt flag */ \ + EIFR = (1<<INTF0); \ +} while (0) +#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT)) + +/* TXD Port */ +#define SERIAL_SOFT_TXD_ENABLE +#define SERIAL_SOFT_TXD_DDR DDRD +#define SERIAL_SOFT_TXD_PORT PORTD +#define SERIAL_SOFT_TXD_PIN PIND +#define SERIAL_SOFT_TXD_BIT 3 +#define SERIAL_SOFT_TXD_HI() do { SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); } while (0) +#define SERIAL_SOFT_TXD_LO() do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0) +#define SERIAL_SOFT_TXD_INIT() do { \ + /* pin configuration: output */ \ + SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \ + /* idle */ \ + SERIAL_SOFT_TXD_ON(); \ +} while (0) + + |