diff options
Diffstat (limited to 'keyboards/cannonkeys')
7 files changed, 12 insertions, 1917 deletions
diff --git a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.c deleted file mode 100644 index 7c09bd997c..0000000000 --- a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" -#include "stm32_gpio.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, - VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, - VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB(STM32_GPIO_EN_MASK); - rccEnableAHB(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - extern void enter_bootloader_mode_if_requested(void); - enter_bootloader_mode_if_requested(); - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { - SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP; - SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP); -} diff --git a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.h deleted file mode 100644 index 57636d1f12..0000000000 --- a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.h +++ /dev/null @@ -1,940 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/* - * Setup for ST STM32F072B-Discovery board. - */ - -/* - * Board identifier. - */ -#define BOARD_ST_STM32F072B_DISCOVERY -#define BOARD_NAME "ST STM32F072B-Discovery" - -/* - * Board oscillators-related settings. - * NOTE: HSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 32768 -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 0U -#endif - -#define STM32_HSE_BYPASS - -/* - * MCU type as defined in the ST header. - */ -#define STM32F072xB - -/* - * IO pins assignments. - */ -#define GPIOA_BUTTON 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_PIN4 4U -#define GPIOA_PIN5 5U -#define GPIOA_PIN6 6U -#define GPIOA_PIN7 7U -#define GPIOA_PIN8 8U -#define GPIOA_PIN9 9U -#define GPIOA_PIN10 10U -#define GPIOA_USB_DM 11U -#define GPIOA_USB_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_PIN3 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_PIN6 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_SPI2_SCK 13U -#define GPIOB_SPI2_MISO 14U -#define GPIOB_SPI2_MOSI 15U - -#define GPIOC_MEMS_CS 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_LED_RED 6U -#define GPIOC_LED_BLUE 7U -#define GPIOC_LED_ORANGE 8U -#define GPIOC_LED_GREEN 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_OSC_IN 0U -#define GPIOF_OSC_OUT 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_BUTTON PAL_LINE(GPIOA, 0U) -#define LINE_USB_DM PAL_LINE(GPIOA, 11U) -#define LINE_USB_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) -#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U) -#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U) -#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U) -#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U) -#define LINE_LED_RED PAL_LINE(GPIOC, 6U) -#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U) -#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U) -#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) -#define LINE_OSC_IN PAL_LINE(GPIOF, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - BUTTON (input floating). - * PA1 - PIN1 (input pullup). - * PA2 - PIN2 (input pullup). - * PA3 - PIN3 (input pullup). - * PA4 - PIN4 (input pullup). - * PA5 - PIN5 (input pullup). - * PA6 - PIN6 (input pullup). - * PA7 - PIN7 (input pullup). - * PA8 - PIN8 (input pullup). - * PA9 - PIN9 (input pullup). - * PA10 - PIN10 (input pullup). - * PA11 - USB_DM (input floating). - * PA12 - USB_DP (input floating). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - PIN15 (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \ - PIN_MODE_INPUT(GPIOA_PIN1) | \ - PIN_MODE_INPUT(GPIOA_PIN2) | \ - PIN_MODE_INPUT(GPIOA_PIN3) | \ - PIN_MODE_INPUT(GPIOA_PIN4) | \ - PIN_MODE_INPUT(GPIOA_PIN5) | \ - PIN_MODE_INPUT(GPIOA_PIN6) | \ - PIN_MODE_INPUT(GPIOA_PIN7) | \ - PIN_MODE_INPUT(GPIOA_PIN8) | \ - PIN_MODE_INPUT(GPIOA_PIN9) | \ - PIN_MODE_INPUT(GPIOA_PIN10) | \ - PIN_MODE_INPUT(GPIOA_USB_DM) | \ - PIN_MODE_INPUT(GPIOA_USB_DP) | \ - PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ - PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ - PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ - PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ - PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ - PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ - PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ - PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \ - PIN_ODR_HIGH(GPIOA_PIN1) | \ - PIN_ODR_HIGH(GPIOA_PIN2) | \ - PIN_ODR_HIGH(GPIOA_PIN3) | \ - PIN_ODR_HIGH(GPIOA_PIN4) | \ - PIN_ODR_HIGH(GPIOA_PIN5) | \ - PIN_ODR_HIGH(GPIOA_PIN6) | \ - PIN_ODR_HIGH(GPIOA_PIN7) | \ - PIN_ODR_HIGH(GPIOA_PIN8) | \ - PIN_ODR_HIGH(GPIOA_PIN9) | \ - PIN_ODR_HIGH(GPIOA_PIN10) | \ - PIN_ODR_HIGH(GPIOA_USB_DM) | \ - PIN_ODR_HIGH(GPIOA_USB_DP) | \ - PIN_ODR_HIGH(GPIOA_SWDIO) | \ - PIN_ODR_HIGH(GPIOA_SWCLK) | \ - PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN7, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \ - PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ - PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - PIN3 (input pullup). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - PIN6 (input pullup). - * PB7 - PIN7 (input pullup). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - SPI2_SCK (alternate 0). - * PB14 - SPI2_MISO (alternate 0). - * PB15 - SPI2_MOSI (alternate 0). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ - PIN_MODE_INPUT(GPIOB_PIN1) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_INPUT(GPIOB_PIN3) | \ - PIN_MODE_INPUT(GPIOB_PIN4) | \ - PIN_MODE_INPUT(GPIOB_PIN5) | \ - PIN_MODE_INPUT(GPIOB_PIN6) | \ - PIN_MODE_INPUT(GPIOB_PIN7) | \ - PIN_MODE_INPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ - PIN_OSPEED_HIGH(GPIOB_PIN2) | \ - PIN_OSPEED_HIGH(GPIOB_PIN3) | \ - PIN_OSPEED_HIGH(GPIOB_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ - PIN_ODR_HIGH(GPIOB_PIN1) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_HIGH(GPIOB_PIN3) | \ - PIN_ODR_HIGH(GPIOB_PIN4) | \ - PIN_ODR_HIGH(GPIOB_PIN5) | \ - PIN_ODR_HIGH(GPIOB_PIN6) | \ - PIN_ODR_HIGH(GPIOB_PIN7) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U)) - -/* - * GPIOC setup: - * - * PC0 - MEMS_CS (output pushpull maximum). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - LED_RED (output pushpull maximum). - * PC7 - LED_BLUE (output pushpull maximum). - * PC8 - LED_ORANGE (output pushpull maximum). - * PC9 - LED_GREEN (output pushpull maximum). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - OSC32_IN (input floating). - * PC15 - OSC32_OUT (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_OUTPUT(GPIOC_LED_RED) | \ - PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_OSC32_IN) | \ - PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ - PIN_OSPEED_HIGH(GPIOC_LED_RED) | \ - PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_LOW(GPIOC_LED_RED) | \ - PIN_ODR_LOW(GPIOC_LED_BLUE) | \ - PIN_ODR_LOW(GPIOC_LED_ORANGE) | \ - PIN_ODR_LOW(GPIOC_LED_GREEN) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_OSC32_IN) | \ - PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_BLUE, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ - PIN_MODE_INPUT(GPIOD_PIN1) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_INPUT(GPIOD_PIN4) | \ - PIN_MODE_INPUT(GPIOD_PIN5) | \ - PIN_MODE_INPUT(GPIOD_PIN6) | \ - PIN_MODE_INPUT(GPIOD_PIN7) | \ - PIN_MODE_INPUT(GPIOD_PIN8) | \ - PIN_MODE_INPUT(GPIOD_PIN9) | \ - PIN_MODE_INPUT(GPIOD_PIN10) | \ - PIN_MODE_INPUT(GPIOD_PIN11) | \ - PIN_MODE_INPUT(GPIOD_PIN12) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_INPUT(GPIOD_PIN14) | \ - PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ - PIN_ODR_HIGH(GPIOD_PIN1) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_PIN4) | \ - PIN_ODR_HIGH(GPIOD_PIN5) | \ - PIN_ODR_HIGH(GPIOD_PIN6) | \ - PIN_ODR_HIGH(GPIOD_PIN7) | \ - PIN_ODR_HIGH(GPIOD_PIN8) | \ - PIN_ODR_HIGH(GPIOD_PIN9) | \ - PIN_ODR_HIGH(GPIOD_PIN10) | \ - PIN_ODR_HIGH(GPIOD_PIN11) | \ - PIN_ODR_HIGH(GPIOD_PIN12) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_PIN14) | \ - PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 (input pullup). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ - PIN_MODE_INPUT(GPIOE_PIN1) | \ - PIN_MODE_INPUT(GPIOE_PIN2) | \ - PIN_MODE_INPUT(GPIOE_PIN3) | \ - PIN_MODE_INPUT(GPIOE_PIN4) | \ - PIN_MODE_INPUT(GPIOE_PIN5) | \ - PIN_MODE_INPUT(GPIOE_PIN6) | \ - PIN_MODE_INPUT(GPIOE_PIN7) | \ - PIN_MODE_INPUT(GPIOE_PIN8) | \ - PIN_MODE_INPUT(GPIOE_PIN9) | \ - PIN_MODE_INPUT(GPIOE_PIN10) | \ - PIN_MODE_INPUT(GPIOE_PIN11) | \ - PIN_MODE_INPUT(GPIOE_PIN12) | \ - PIN_MODE_INPUT(GPIOE_PIN13) | \ - PIN_MODE_INPUT(GPIOE_PIN14) | \ - PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ - PIN_ODR_HIGH(GPIOE_PIN1) | \ - PIN_ODR_HIGH(GPIOE_PIN2) | \ - PIN_ODR_HIGH(GPIOE_PIN3) | \ - PIN_ODR_HIGH(GPIOE_PIN4) | \ - PIN_ODR_HIGH(GPIOE_PIN5) | \ - PIN_ODR_HIGH(GPIOE_PIN6) | \ - PIN_ODR_HIGH(GPIOE_PIN7) | \ - PIN_ODR_HIGH(GPIOE_PIN8) | \ - PIN_ODR_HIGH(GPIOE_PIN9) | \ - PIN_ODR_HIGH(GPIOE_PIN10) | \ - PIN_ODR_HIGH(GPIOE_PIN11) | \ - PIN_ODR_HIGH(GPIOE_PIN12) | \ - PIN_ODR_HIGH(GPIOE_PIN13) | \ - PIN_ODR_HIGH(GPIOE_PIN14) | \ - PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - OSC_IN (input floating). - * PF1 - OSC_OUT (input floating). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \ - PIN_MODE_INPUT(GPIOF_OSC_OUT) | \ - PIN_MODE_INPUT(GPIOF_PIN2) | \ - PIN_MODE_INPUT(GPIOF_PIN3) | \ - PIN_MODE_INPUT(GPIOF_PIN4) | \ - PIN_MODE_INPUT(GPIOF_PIN5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_INPUT(GPIOF_PIN12) | \ - PIN_MODE_INPUT(GPIOF_PIN13) | \ - PIN_MODE_INPUT(GPIOF_PIN14) | \ - PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \ - PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \ - PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \ - PIN_ODR_HIGH(GPIOF_OSC_OUT) | \ - PIN_ODR_HIGH(GPIOF_PIN2) | \ - PIN_ODR_HIGH(GPIOF_PIN3) | \ - PIN_ODR_HIGH(GPIOF_PIN4) | \ - PIN_ODR_HIGH(GPIOF_PIN5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_PIN12) | \ - PIN_ODR_HIGH(GPIOF_PIN13) | \ - PIN_ODR_HIGH(GPIOF_PIN14) | \ - PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \ - PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN15, 0U)) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.mk b/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.mk deleted file mode 100644 index b98dcdd26c..0000000000 --- a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY diff --git a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg b/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg deleted file mode 100644 index 9c7cf4fd76..0000000000 --- a/keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg +++ /dev/null @@ -1,703 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- STM32F0xx board Template --> -<board - xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" - xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd"> - <configuration_settings> - <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path> - <output_path>..</output_path> - <hal_version>3.0.x</hal_version> - </configuration_settings> - <board_name>ST STM32F072B-Discovery</board_name> - <board_id>ST_STM32F072B_DISCOVERY</board_id> - <board_functions></board_functions> - <subtype>STM32F072xB</subtype> - <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0" - LSEBypass="false" LSEDrive="3 High Drive (default)" /> - <ports> - <GPIOA> - <pin0 - ID="BUTTON" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="USB_DM" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="USB_DP" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="SWDIO" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="SWCLK" - Type="PushPull" - Speed="Maximum" - Resistor="PullDown" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOA> - <GPIOB> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Maximum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="SPI2_SCK" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin14 - ID="SPI2_MISO" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Alternate" - Alternate="0" /> - <pin15 - ID="SPI2_MOSI" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Alternate" - Alternate="0" /> - </GPIOB> - <GPIOC> - <pin0 - ID="MEMS_CS" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Output" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="LED_RED" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin7 - ID="LED_BLUE" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin8 - ID="LED_ORANGE" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" ></pin8> - <pin9 - ID="LED_GREEN" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="Low" - Mode="Output" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="OSC32_IN" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="OSC32_OUT" - Type="PushPull" - Speed="Maximum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOC> - <GPIOD> - <pin0 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOD> - <GPIOE> - <pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - <pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" - Level="High" Mode="Input" Alternate="0" /> - </GPIOE> - <GPIOF> - <pin0 - ID="OSC_IN" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin1 - ID="OSC_OUT" - Type="PushPull" - Speed="Minimum" - Resistor="Floating" - Level="High" - Mode="Input" - Alternate="0" /> - <pin2 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin3 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin4 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin5 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin6 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin7 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin8 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin9 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin10 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin11 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin12 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin13 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin14 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - <pin15 - ID="" - Type="PushPull" - Speed="Minimum" - Resistor="PullUp" - Level="High" - Mode="Input" - Alternate="0" /> - </GPIOF> - </ports> -</board> diff --git a/keyboards/cannonkeys/satisfaction75/config.h b/keyboards/cannonkeys/satisfaction75/config.h index ff31e37c4b..6a3598f8ec 100644 --- a/keyboards/cannonkeys/satisfaction75/config.h +++ b/keyboards/cannonkeys/satisfaction75/config.h @@ -17,6 +17,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once +/* Ensure we jump to bootloader if the RESET keycode was pressed */ +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE + +/* LSE clock */ +#define STM32_LSECLK 32768 + /* USB Device descriptor parameter */ #define VENDOR_ID 0xCA04 #define PRODUCT_ID 0x57F5 diff --git a/keyboards/cannonkeys/satisfaction75/rules.mk b/keyboards/cannonkeys/satisfaction75/rules.mk index 80f57181a9..a2288a4aab 100644 --- a/keyboards/cannonkeys/satisfaction75/rules.mk +++ b/keyboards/cannonkeys/satisfaction75/rules.mk @@ -1,6 +1,6 @@ # MCU name MCU = STM32F072 -BOARD = ST_STM32F072B_DISCOVERY +BOARD = GENERIC_STM32_F072XB # Build Options # comment out to disable the options. diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction75.c b/keyboards/cannonkeys/satisfaction75/satisfaction75.c index f92067c98f..c0ea68669b 100644 --- a/keyboards/cannonkeys/satisfaction75/satisfaction75.c +++ b/keyboards/cannonkeys/satisfaction75/satisfaction75.c @@ -54,6 +54,11 @@ backlight_config_t kb_backlight_config = { .level = BACKLIGHT_LEVELS }; +void board_init(void) { + SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP; + SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP); +} + #ifdef VIA_ENABLE void backlight_get_value( uint8_t *data ) |