diff options
Diffstat (limited to 'keyboards/arrow_pad/keymaps')
| -rw-r--r-- | keyboards/arrow_pad/keymaps/default/keymap.c | 163 | ||||
| -rw-r--r-- | keyboards/arrow_pad/keymaps/pad_21/Makefile | 17 | ||||
| -rw-r--r-- | keyboards/arrow_pad/keymaps/pad_21/config.h | 158 | ||||
| -rw-r--r-- | keyboards/arrow_pad/keymaps/pad_21/keymap.c | 160 | ||||
| -rw-r--r-- | keyboards/arrow_pad/keymaps/pad_24/Makefile | 17 | ||||
| -rw-r--r-- | keyboards/arrow_pad/keymaps/pad_24/config.h | 160 | ||||
| -rw-r--r-- | keyboards/arrow_pad/keymaps/pad_24/keymap.c | 163 |
7 files changed, 0 insertions, 838 deletions
diff --git a/keyboards/arrow_pad/keymaps/default/keymap.c b/keyboards/arrow_pad/keymaps/default/keymap.c deleted file mode 100644 index 5647f75afe..0000000000 --- a/keyboards/arrow_pad/keymaps/default/keymap.c +++ /dev/null @@ -1,163 +0,0 @@ -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, -// this is the style you want to emulate. - -#include "arrow_pad.h" -#include "led.h" - -// This is the 21-key keypad to 2x11 element matrix mapping -#define KEYMAP( \ - KM_ESC, KM_TAB, KM_BSL, KM_ARR, \ - KM_NUM, KM_FSL, KM_AST, KM_MIN, \ - KM___7, KM___8, KM___9, KM_EQU, \ - KM___4, KM___5, KM___6, KM_PLS, \ - KM___1, KM___2, KM___3, ___ENT, \ - KM___0, _____0, KM_DOT, KM_ENT \ -) { \ - { KM_ESC, KM_TAB, KM_BSL, KM_ARR }, \ - { KM_NUM, KM_FSL, KM_AST, KM_MIN }, \ - { KM___7, KM___8, KM___9, KM_EQU }, \ - { KM___4, KM___5, KM___6, KM_PLS }, \ - { KM___1, KM___2, KM___3, KC_NO }, \ - { KM___0, KC_NO, KM_DOT, KM_ENT } \ -} - -#define LAYER_BASE 0 -#define LAYER_EDIT 1 -#define LAYER_FUNCTION 2 - -#define MACRO_COPY_CUT 0 -#define MACRO_SHIFT_CONTROL 1 -#define MACRO_CONTROL_ALT 2 - -#define M_COPY KC_FN5 -#define M_SHFCT KC_FN6 -#define M_CTALT KC_FN7 - -#define SC_UNDO LCTL(KC_Z) -#define SC_REDO LCTL(KC_Y) -#define SC_CUT LCTL(KC_X) -#define SC_COPY LCTL(KC_C) -#define SC_PSTE LCTL(KC_V) -#define SC_SELA LCTL(KC_A) -#define SC_SAVE LCTL(KC_S) -#define SC_OPEN LCTL(KC_O) -#define SC_ACLS LALT(KC_F4) -#define SC_CCLS LCTL(KC_F4) - -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[LAYER_BASE] = KEYMAP( \ - KC_ESC, KC_TAB, KC_BSLS, KC_FN0, \ - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, KC_PEQL, \ - KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_P1, KC_P2, KC_P3, XXXXXXX, \ - KC_P0, KC_PCMM, KC_PDOT, KC_PENT ), - -[LAYER_EDIT] = KEYMAP( \ - KC_ESC, KC_TAB, KC_SPC, _______, \ - KC_FN1, SC_PSTE, SC_REDO, SC_UNDO, \ - KC_HOME, KC_UP, KC_PGUP, KC_LALT, \ - KC_LEFT, M_COPY, KC_RGHT, KC_LCTL, \ - KC_END, KC_DOWN, KC_PGDN, XXXXXXX, \ - KC_BSPC, KC_PENT, KC_DEL, M_SHFCT), - -[LAYER_FUNCTION] = KEYMAP( \ - KC_FN2, KC_FN3, KC_FN4, _______, \ - KC_FN1, _______, _______, _______, \ - _______, _______, _______, _______, \ - _______, _______, _______, _______, \ - _______, _______, _______, XXXXXXX, \ - RESET, _______, _______, _______ ), - -}; - - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION), - [1] = ACTION_LAYER_TOGGLE(LAYER_EDIT), - [2] = ACTION_BACKLIGHT_TOGGLE(), - [3] = ACTION_BACKLIGHT_INCREASE(), - [4] = ACTION_BACKLIGHT_DECREASE(), - [5] = ACTION_MACRO_TAP(MACRO_COPY_CUT), - [6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL), - [7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT), - -}; - - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) -{ -} - - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) { - - case MACRO_COPY_CUT: - if (record->event.pressed) { - register_code(KC_LCTL); - if (record->tap.count == 1) { - register_code(KC_C); - unregister_code(KC_C); - } - else if (record->tap.count == 2) { - register_code(KC_X); - unregister_code(KC_X); - } - unregister_code(KC_LCTL); - } - break; - - case MACRO_SHIFT_CONTROL: - if (record->event.pressed) { - if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT)); - if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL)); - if (record->tap.count == 3) register_code(KC_PENT);; - } - else { - unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL)); - unregister_code(KC_PENT); - } - break; - - case MACRO_CONTROL_ALT: - if (record->event.pressed) { - if (record->tap.count < 2) register_mods(MOD_BIT(KC_LCTL)); - if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT)); - } - else { - unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT)); - } - break; - } - - return MACRO_NONE; -} - -void led_set_user(uint8_t usb_led) -{ - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output high - DDRD |= (1<<6); - PORTD |= (1<<6); - } else { - // Hi-Z - DDRD &= ~(1<<6); - PORTD &= ~(1<<6); - } - if (usb_led & (1<<USB_LED_NUM_LOCK)) { - // output low - DDRC |= (1<<7); - PORTC |= ~(1<<7); - } else { - // Hi-Z - DDRC &= ~(1<<7); - PORTC &= ~(1<<7); - } -}
\ No newline at end of file diff --git a/keyboards/arrow_pad/keymaps/pad_21/Makefile b/keyboards/arrow_pad/keymaps/pad_21/Makefile deleted file mode 100644 index af51976a89..0000000000 --- a/keyboards/arrow_pad/keymaps/pad_21/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -CONFIG_H = keymaps/$(KEYMAP)/config.h
\ No newline at end of file diff --git a/keyboards/arrow_pad/keymaps/pad_21/config.h b/keyboards/arrow_pad/keymaps/pad_21/config.h deleted file mode 100644 index a095e87374..0000000000 --- a/keyboards/arrow_pad/keymaps/pad_21/config.h +++ /dev/null @@ -1,158 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x4097 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Nobody -#define PRODUCT Arrow Pad 21 -#define DESCRIPTION 21-Key QMK Assistant - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 11 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D3, D5 } -#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D4 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/arrow_pad/keymaps/pad_21/keymap.c b/keyboards/arrow_pad/keymaps/pad_21/keymap.c deleted file mode 100644 index 28917a5d9e..0000000000 --- a/keyboards/arrow_pad/keymaps/pad_21/keymap.c +++ /dev/null @@ -1,160 +0,0 @@ -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, -// this is the style you want to emulate. - -#include "arrow_pad.h" -#include "led.h" - -// This is the 21-key keypad to 2x11 element matrix mapping -#define KEYMAP( \ - KM_ESC, KM_TAB, KM_BSL, KM_ARR, \ - KM_NUM, KM_FSL, KM_AST, KM_MIN, \ - KM___7, KM___8, KM___9, ___PLS, \ - KM___4, KM___5, KM___6, KM_PLS, \ - KM___1, KM___2, KM___3, ___ENT, \ - KM___0, _____0, KM_DOT, KM_ENT \ -) { \ - { KM_ESC, KM_TAB, KM_BSL, KM_ARR, KM___7, KM___8, KM___9, KM_PLS, KM___1, KM___2, KM___3, }, \ - { KM_NUM, KM_FSL, KM_AST, KM_MIN, KM___4, KM___5, KM___6, KM_ENT, KC_NO, KM___0, KM_DOT, }, \ -} - - -#define LAYER_BASE 0 -#define LAYER_EDIT 1 -#define LAYER_FUNCTION 2 - -#define MACRO_COPY_CUT 0 -#define MACRO_SHIFT_CONTROL 1 -#define MACRO_CONTROL_ALT 2 - -#define M_COPY KC_FN5 -#define M_SHFCT KC_FN6 -#define M_CTALT KC_FN7 - -#define SC_UNDO LCTL(KC_Z) -#define SC_REDO LCTL(KC_Y) -#define SC_CUT LCTL(KC_X) -#define SC_COPY LCTL(KC_C) -#define SC_PSTE LCTL(KC_V) -#define SC_SELA LCTL(KC_A) -#define SC_SAVE LCTL(KC_S) -#define SC_OPEN LCTL(KC_O) -#define SC_ACLS LALT(KC_F4) -#define SC_CCLS LCTL(KC_F4) - -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[LAYER_BASE] = KEYMAP( \ - KC_ESC, KC_TAB, KC_BSLS, KC_FN0, \ - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, XXXXXXX, \ - KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_P1, KC_P2, KC_P3, XXXXXXX, \ - KC_P0, XXXXXXX, KC_PDOT, KC_PENT ), - -[LAYER_EDIT] = KEYMAP( \ - KC_ESC, KC_TAB, KC_SPC, _______, \ - KC_FN1, SC_PSTE, SC_REDO, SC_UNDO, \ - KC_HOME, KC_UP, KC_PGUP, XXXXXXX, \ - KC_LEFT, M_COPY, KC_RGHT, M_CTALT, \ - KC_END, KC_DOWN, KC_PGDN, XXXXXXX, \ - KC_BSPC, XXXXXXX, KC_DEL, M_SHFCT), - -[LAYER_FUNCTION] = KEYMAP( \ - KC_FN2, KC_FN3, KC_FN4, _______, \ - KC_FN1, _______, _______, _______, \ - _______, _______, _______, XXXXXXX, \ - _______, _______, _______, _______, \ - _______, _______, _______, XXXXXXX, \ - RESET, XXXXXXX, _______, _______ ), - -}; - - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION), - [1] = ACTION_LAYER_TOGGLE(LAYER_EDIT), - [2] = ACTION_BACKLIGHT_TOGGLE(), - [3] = ACTION_BACKLIGHT_INCREASE(), - [4] = ACTION_BACKLIGHT_DECREASE(), - [5] = ACTION_MACRO_TAP(MACRO_COPY_CUT), - [6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL), - [7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT), - -}; - - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) -{ -} - - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) { - - case MACRO_COPY_CUT: - if (record->event.pressed) { - register_code(KC_LCTL); - if (record->tap.count == 1) { - register_code(KC_C); - unregister_code(KC_C); - } - else if (record->tap.count == 2) { - register_code(KC_X); - unregister_code(KC_X); - } - unregister_code(KC_LCTL); - } - break; - - case MACRO_SHIFT_CONTROL: - if (record->event.pressed) { - if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT)); - if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL)); - if (record->tap.count == 3) register_code(KC_PENT);; - } - else { - unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL)); - unregister_code(KC_PENT); - } - break; - - case MACRO_CONTROL_ALT: - if (record->event.pressed) { - if (record->tap.count < 2) register_mods(MOD_BIT(KC_LCTL)); - if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT)); - } - else { - unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT)); - } - break; - } - - return MACRO_NONE; -} - -void led_set_user(uint8_t usb_led) -{ - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output high - DDRD |= (1<<6); - PORTD |= (1<<6); - } else { - // Hi-Z - DDRD &= ~(1<<6); - PORTD &= ~(1<<6); - } - if (usb_led & (1<<USB_LED_NUM_LOCK)) { - // output low - DDRC |= (1<<7); - PORTC |= ~(1<<7); - } else { - // Hi-Z - DDRC &= ~(1<<7); - PORTC &= ~(1<<7); - } -}
\ No newline at end of file diff --git a/keyboards/arrow_pad/keymaps/pad_24/Makefile b/keyboards/arrow_pad/keymaps/pad_24/Makefile deleted file mode 100644 index e31bfe1af2..0000000000 --- a/keyboards/arrow_pad/keymaps/pad_24/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -CONFIG_H = keymaps/$(KEYMAP)/config.h
\ No newline at end of file diff --git a/keyboards/arrow_pad/keymaps/pad_24/config.h b/keyboards/arrow_pad/keymaps/pad_24/config.h deleted file mode 100644 index e940acaa0c..0000000000 --- a/keyboards/arrow_pad/keymaps/pad_24/config.h +++ /dev/null @@ -1,160 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x4096 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Nobody -#define PRODUCT Arrow Pad 24 -#define DESCRIPTION 24-Key QMK Assistant - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 } -#define MATRIX_COL_PINS { B0, B1, B2, B3 } -#define UNUSED_PINS - -#define BACKLIGHT_PIN B7 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/arrow_pad/keymaps/pad_24/keymap.c b/keyboards/arrow_pad/keymaps/pad_24/keymap.c deleted file mode 100644 index 5647f75afe..0000000000 --- a/keyboards/arrow_pad/keymaps/pad_24/keymap.c +++ /dev/null @@ -1,163 +0,0 @@ -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, -// this is the style you want to emulate. - -#include "arrow_pad.h" -#include "led.h" - -// This is the 21-key keypad to 2x11 element matrix mapping -#define KEYMAP( \ - KM_ESC, KM_TAB, KM_BSL, KM_ARR, \ - KM_NUM, KM_FSL, KM_AST, KM_MIN, \ - KM___7, KM___8, KM___9, KM_EQU, \ - KM___4, KM___5, KM___6, KM_PLS, \ - KM___1, KM___2, KM___3, ___ENT, \ - KM___0, _____0, KM_DOT, KM_ENT \ -) { \ - { KM_ESC, KM_TAB, KM_BSL, KM_ARR }, \ - { KM_NUM, KM_FSL, KM_AST, KM_MIN }, \ - { KM___7, KM___8, KM___9, KM_EQU }, \ - { KM___4, KM___5, KM___6, KM_PLS }, \ - { KM___1, KM___2, KM___3, KC_NO }, \ - { KM___0, KC_NO, KM_DOT, KM_ENT } \ -} - -#define LAYER_BASE 0 -#define LAYER_EDIT 1 -#define LAYER_FUNCTION 2 - -#define MACRO_COPY_CUT 0 -#define MACRO_SHIFT_CONTROL 1 -#define MACRO_CONTROL_ALT 2 - -#define M_COPY KC_FN5 -#define M_SHFCT KC_FN6 -#define M_CTALT KC_FN7 - -#define SC_UNDO LCTL(KC_Z) -#define SC_REDO LCTL(KC_Y) -#define SC_CUT LCTL(KC_X) -#define SC_COPY LCTL(KC_C) -#define SC_PSTE LCTL(KC_V) -#define SC_SELA LCTL(KC_A) -#define SC_SAVE LCTL(KC_S) -#define SC_OPEN LCTL(KC_O) -#define SC_ACLS LALT(KC_F4) -#define SC_CCLS LCTL(KC_F4) - -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[LAYER_BASE] = KEYMAP( \ - KC_ESC, KC_TAB, KC_BSLS, KC_FN0, \ - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, KC_PEQL, \ - KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_P1, KC_P2, KC_P3, XXXXXXX, \ - KC_P0, KC_PCMM, KC_PDOT, KC_PENT ), - -[LAYER_EDIT] = KEYMAP( \ - KC_ESC, KC_TAB, KC_SPC, _______, \ - KC_FN1, SC_PSTE, SC_REDO, SC_UNDO, \ - KC_HOME, KC_UP, KC_PGUP, KC_LALT, \ - KC_LEFT, M_COPY, KC_RGHT, KC_LCTL, \ - KC_END, KC_DOWN, KC_PGDN, XXXXXXX, \ - KC_BSPC, KC_PENT, KC_DEL, M_SHFCT), - -[LAYER_FUNCTION] = KEYMAP( \ - KC_FN2, KC_FN3, KC_FN4, _______, \ - KC_FN1, _______, _______, _______, \ - _______, _______, _______, _______, \ - _______, _______, _______, _______, \ - _______, _______, _______, XXXXXXX, \ - RESET, _______, _______, _______ ), - -}; - - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION), - [1] = ACTION_LAYER_TOGGLE(LAYER_EDIT), - [2] = ACTION_BACKLIGHT_TOGGLE(), - [3] = ACTION_BACKLIGHT_INCREASE(), - [4] = ACTION_BACKLIGHT_DECREASE(), - [5] = ACTION_MACRO_TAP(MACRO_COPY_CUT), - [6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL), - [7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT), - -}; - - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) -{ -} - - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) { - - case MACRO_COPY_CUT: - if (record->event.pressed) { - register_code(KC_LCTL); - if (record->tap.count == 1) { - register_code(KC_C); - unregister_code(KC_C); - } - else if (record->tap.count == 2) { - register_code(KC_X); - unregister_code(KC_X); - } - unregister_code(KC_LCTL); - } - break; - - case MACRO_SHIFT_CONTROL: - if (record->event.pressed) { - if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT)); - if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL)); - if (record->tap.count == 3) register_code(KC_PENT);; - } - else { - unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL)); - unregister_code(KC_PENT); - } - break; - - case MACRO_CONTROL_ALT: - if (record->event.pressed) { - if (record->tap.count < 2) register_mods(MOD_BIT(KC_LCTL)); - if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT)); - } - else { - unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT)); - } - break; - } - - return MACRO_NONE; -} - -void led_set_user(uint8_t usb_led) -{ - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output high - DDRD |= (1<<6); - PORTD |= (1<<6); - } else { - // Hi-Z - DDRD &= ~(1<<6); - PORTD &= ~(1<<6); - } - if (usb_led & (1<<USB_LED_NUM_LOCK)) { - // output low - DDRC |= (1<<7); - PORTC |= ~(1<<7); - } else { - // Hi-Z - DDRC &= ~(1<<7); - PORTC &= ~(1<<7); - } -}
\ No newline at end of file |