diff options
Diffstat (limited to 'keyboard/onekey')
| -rw-r--r-- | keyboard/onekey/Makefile | 132 | ||||
| -rw-r--r-- | keyboard/onekey/Makefile.pjrc | 103 | ||||
| -rw-r--r-- | keyboard/onekey/Makefile.vusb | 88 | ||||
| -rw-r--r-- | keyboard/onekey/README.md | 5 | ||||
| -rw-r--r-- | keyboard/onekey/config.h | 156 | ||||
| -rw-r--r-- | keyboard/onekey/keymap.c | 66 | ||||
| -rw-r--r-- | keyboard/onekey/led.c | 25 | ||||
| -rw-r--r-- | keyboard/onekey/matrix.c | 176 | ||||
| -rw-r--r-- | keyboard/onekey/usbconfig.h | 377 |
9 files changed, 0 insertions, 1128 deletions
diff --git a/keyboard/onekey/Makefile b/keyboard/onekey/Makefile deleted file mode 100644 index 0b54e7d25c..0000000000 --- a/keyboard/onekey/Makefile +++ /dev/null @@ -1,132 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = onekey_lufa - -# Directory common source filess exist -TMK_DIR = ../../tmk_core - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# project specific files -SRC = keymap.c \ - matrix.c \ - led.c - -CONFIG_H = config.h - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -#EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -#COMMAND_ENABLE = yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA - -#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support -#PS2_USE_BUSYWAIT = yes # uses primitive reference code -#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin -#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) - - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TMK_DIR) - -include $(TMK_DIR)/common.mk -include $(TMK_DIR)/protocol.mk -include $(TMK_DIR)/protocol/lufa.mk -include $(TMK_DIR)/rules.mk diff --git a/keyboard/onekey/Makefile.pjrc b/keyboard/onekey/Makefile.pjrc deleted file mode 100644 index ebf0710f73..0000000000 --- a/keyboard/onekey/Makefile.pjrc +++ /dev/null @@ -1,103 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = onekey_pjrc - -# Directory common source filess exist -TMK_DIR = ../../tmk_core - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# project specific files -SRC = keymap.c \ - matrix.c \ - led.c - -CONFIG_H = config.h - - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -MCU = atmega32u4 -#MCU = at90usb1286 - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 16000000 - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -#MOUSEKEY_ENABLE = yes # Mouse keys(+5000) -#EXTRAKEY_ENABLE = yes # Audio control and System control(+600) -CONSOLE_ENABLE = yes # Console for debug -#COMMAND_ENABLE = yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -#NKRO_ENABLE = yes # USB Nkey Rollover(+500) - -PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support -PS2_USE_BUSYWAIT = yes # uses primitive reference code -#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin -#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) - - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TMK_DIR) - -include $(TMK_DIR)/common.mk -include $(TMK_DIR)/protocol.mk -include $(TMK_DIR)/protocol/pjrc.mk -include $(TMK_DIR)/rules.mk diff --git a/keyboard/onekey/Makefile.vusb b/keyboard/onekey/Makefile.vusb deleted file mode 100644 index fb1fbdfea2..0000000000 --- a/keyboard/onekey/Makefile.vusb +++ /dev/null @@ -1,88 +0,0 @@ -# Target file name (without extension). -TARGET = onekey_vusb - -# Directory common source filess exist -TMK_DIR = ../../tmk_core - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# keyboard dependent files -SRC = keymap.c \ - matrix.c \ - led.c - -CONFIG_H = config.h - - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = atmega168p -MCU = atmega328p - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 12000000 - - -# Build Options -# comment out to disable the options. -# -#MOUSEKEY_ENABLE = yes # Mouse keys -#EXTRAKEY_ENABLE = yes # Audio control and System control -#NKRO_ENABLE = yes # USB Nkey Rollover - - - -#---------------- Programming Options -------------------------- -AVRDUDE = avrdude -# Type: avrdude -c ? to get a full listing. -AVRDUDE_PROGRAMMER = usbasp -AVRDUDE_PORT = -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep - -# Uncomment the following if you want avrdude's erase cycle counter. -# Note that this counter needs to be initialized first using -Yn, -# see avrdude manual. -#AVRDUDE_ERASE_COUNTER = -y - -# Uncomment the following if you do /not/ wish a verification to be -# performed after programming the device. -#AVRDUDE_NO_VERIFY = -V - -# Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> -# to submit bug reports. -#AVRDUDE_VERBOSE = -v -v - -#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) -AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) -AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) - -PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) - - -# Boot Section Size in bytes -# Teensy halfKay 512 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBasp 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 - - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TMK_DIR) - - -include $(TMK_DIR)/protocol.mk -include $(TMK_DIR)/common.mk -include $(TMK_DIR)/protocol/vusb.mk -include $(TMK_DIR)/rules.mk diff --git a/keyboard/onekey/README.md b/keyboard/onekey/README.md deleted file mode 100644 index 7413f3880e..0000000000 --- a/keyboard/onekey/README.md +++ /dev/null @@ -1,5 +0,0 @@ -Onekey -====== -Just one key keyboard for example. It sends 'a' key if pins PB0 and PB1 are short-circuited. - -https://github.com/tmk/tmk_keyboard/issues/56 diff --git a/keyboard/onekey/config.h b/keyboard/onekey/config.h deleted file mode 100644 index bf1d2b1ed3..0000000000 --- a/keyboard/onekey/config.h +++ /dev/null @@ -1,156 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1111 -#define DEVICE_VER 0x0001 -#define MANUFACTURER geekhack -#define PRODUCT Onekey -#define DESCRIPTION t.m.k. keyboard firmware for Onekey - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - - - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - - -/* PS/2 mouse */ -#ifdef PS2_USE_BUSYWAIT -# define PS2_CLOCK_PORT PORTD -# define PS2_CLOCK_PIN PIND -# define PS2_CLOCK_DDR DDRD -# define PS2_CLOCK_BIT 1 -# define PS2_DATA_PORT PORTD -# define PS2_DATA_PIN PIND -# define PS2_DATA_DDR DDRD -# define PS2_DATA_BIT 2 -#endif - - -/* PS/2 mouse interrupt version */ -#ifdef PS2_USE_INT -/* uses INT1 for clock line(ATMega32U4) */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 1 -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 2 - -#define PS2_INT_INIT() do { \ - EICRA |= ((1<<ISC11) | \ - (0<<ISC10)); \ -} while (0) -#define PS2_INT_ON() do { \ - EIMSK |= (1<<INT1); \ -} while (0) -#define PS2_INT_OFF() do { \ - EIMSK &= ~(1<<INT1); \ -} while (0) -#define PS2_INT_VECT INT1_vect -#endif - - -/* PS/2 mouse USART version */ -#ifdef PS2_USE_USART -#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) -/* XCK for clock line and RXD for data line */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 5 -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 2 - -/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ -/* set DDR of CLOCK as input to be slave */ -#define PS2_USART_INIT() do { \ - PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ - PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ - UCSR1C = ((1 << UMSEL10) | \ - (3 << UPM10) | \ - (0 << USBS1) | \ - (3 << UCSZ10) | \ - (0 << UCPOL1)); \ - UCSR1A = 0; \ - UBRR1H = 0; \ - UBRR1L = 0; \ -} while (0) -#define PS2_USART_RX_INT_ON() do { \ - UCSR1B = ((1 << RXCIE1) | \ - (1 << RXEN1)); \ -} while (0) -#define PS2_USART_RX_POLL_ON() do { \ - UCSR1B = (1 << RXEN1); \ -} while (0) -#define PS2_USART_OFF() do { \ - UCSR1C = 0; \ - UCSR1B &= ~((1 << RXEN1) | \ - (1 << TXEN1)); \ -} while (0) -#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) -#define PS2_USART_RX_DATA UDR1 -#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) -#define PS2_USART_RX_VECT USART1_RX_vect -#endif -#endif - -#endif diff --git a/keyboard/onekey/keymap.c b/keyboard/onekey/keymap.c deleted file mode 100644 index dce4e9191e..0000000000 --- a/keyboard/onekey/keymap.c +++ /dev/null @@ -1,66 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#include <stdint.h> -#include <stdbool.h> -#include <avr/pgmspace.h> -#include "keycode.h" -#include "action.h" -#include "action_macro.h" -#include "report.h" -#include "host.h" -#include "print.h" -#include "debug.h" -#include "keymap.h" - - -static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - {{KC_A}}, -}; - -/* - * Fn action definition - */ -static const uint16_t PROGMEM fn_actions[] = { -}; - - - -#define KEYMAPS_SIZE (sizeof(keymaps) / sizeof(keymaps[0])) -#define FN_ACTIONS_SIZE (sizeof(fn_actions) / sizeof(fn_actions[0])) - -/* translates key to keycode */ -uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) -{ - if (layer < KEYMAPS_SIZE) { - return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); - } else { - // fall back to layer 0 - return pgm_read_byte(&keymaps[0][(key.row)][(key.col)]); - } -} - -/* translates Fn keycode to action */ -action_t keymap_fn_to_action(uint8_t keycode) -{ - action_t action; - if (FN_INDEX(keycode) < FN_ACTIONS_SIZE) { - action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]); - } else { - action.code = ACTION_NO; - } - return action; -} diff --git a/keyboard/onekey/led.c b/keyboard/onekey/led.c deleted file mode 100644 index 2d52fbf1c3..0000000000 --- a/keyboard/onekey/led.c +++ /dev/null @@ -1,25 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <avr/io.h> -#include "stdint.h" -#include "led.h" - - -void led_set(uint8_t usb_led) -{ -} diff --git a/keyboard/onekey/matrix.c b/keyboard/onekey/matrix.c deleted file mode 100644 index 29df868321..0000000000 --- a/keyboard/onekey/matrix.c +++ /dev/null @@ -1,176 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" - - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } -} - -uint8_t matrix_scan(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - return 1; -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -/* Column pin configuration - * col: 0 - * pin: B0 - */ -static void init_cols(void) -{ - // Input with pull-up(DDR:0, PORT:1) - DDRB &= ~(1<<0); - PORTB |= (1<<0); -} - -static matrix_row_t read_cols(void) -{ - return (PINB&(1<<0) ? 0 : (1<<0)); -} - -/* Row pin configuration - * row: 0 - * pin: B1 - */ -static void unselect_rows(void) -{ - // Hi-Z(DDR:0, PORT:0) to unselect - DDRB &= ~0b00000010; - PORTB &= ~0b00000010; -} - -static void select_row(uint8_t row) -{ - // Output low(DDR:1, PORT:0) to select - switch (row) { - case 0: - DDRB |= (1<<1); - PORTB &= ~(1<<1); - break; - } -} diff --git a/keyboard/onekey/usbconfig.h b/keyboard/onekey/usbconfig.h deleted file mode 100644 index d0ca4c717e..0000000000 --- a/keyboard/onekey/usbconfig.h +++ /dev/null @@ -1,377 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ - */ - -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ - - -/* -General Description: -This file is an example configuration (with inline documentation) for the USB -driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is -also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may -wire the lines to any other port, as long as D+ is also wired to INT0 (or any -other hardware interrupt, as long as it is the highest level interrupt, see -section at the end of this file). -*/ - -/* ---------------------------- Hardware Config ---------------------------- */ - -#define USB_CFG_IOPORTNAME D -/* This is the port where the USB bus is connected. When you configure it to - * "B", the registers PORTB, PINB and DDRB will be used. - */ -#define USB_CFG_DMINUS_BIT 3 -/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. - * This may be any bit in the port. - */ -#define USB_CFG_DPLUS_BIT 2 -/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. - * This may be any bit in the port. Please note that D+ must also be connected - * to interrupt pin INT0! [You can also use other interrupts, see section - * "Optional MCU Description" below, or you can connect D- to the interrupt, as - * it is required if you use the USB_COUNT_SOF feature. If you use D- for the - * interrupt, the USB interrupt will also be triggered at Start-Of-Frame - * markers every millisecond.] - */ -#define USB_CFG_CLOCK_KHZ (F_CPU/1000) -/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, - * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code - * require no crystal, they tolerate +/- 1% deviation from the nominal - * frequency. All other rates require a precision of 2000 ppm and thus a - * crystal! - * Since F_CPU should be defined to your actual clock rate anyway, you should - * not need to modify this setting. - */ -#define USB_CFG_CHECK_CRC 0 -/* Define this to 1 if you want that the driver checks integrity of incoming - * data packets (CRC checks). CRC checks cost quite a bit of code size and are - * currently only available for 18 MHz crystal clock. You must choose - * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. - */ - -/* ----------------------- Optional Hardware Config ------------------------ */ - -/* #define USB_CFG_PULLUP_IOPORTNAME D */ -/* If you connect the 1.5k pullup resistor from D- to a port pin instead of - * V+, you can connect and disconnect the device from firmware by calling - * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). - * This constant defines the port on which the pullup resistor is connected. - */ -/* #define USB_CFG_PULLUP_BIT 4 */ -/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined - * above) where the 1.5k pullup resistor is connected. See description - * above for details. - */ - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 10 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#define USB_CFG_IS_SELF_POWERED 0 -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#define USB_CFG_MAX_BUS_POWER 100 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 1 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 0 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 0 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x01 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 't', '.', 'm', '.', 'k', '.' -#define USB_CFG_VENDOR_NAME_LEN 6 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'P', 'S', '/', '2', ' ', 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd', ' ', 'c', 'o', 'n', 'v', 'e', 'r', 't', 'e', 'r' -#define USB_CFG_DEVICE_NAME_LEN 23 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0 -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 3 /* HID */ -#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ -#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -/* #define USB_PUBLIC static */ -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -//#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC -#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -/* #define USB_INTR_CFG MCUCR */ -/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE GIMSK */ -/* #define USB_INTR_ENABLE_BIT INT0 */ -/* #define USB_INTR_PENDING GIFR */ -/* #define USB_INTR_PENDING_BIT INTF0 */ -/* #define USB_INTR_VECTOR INT0_vect */ - -#endif /* __usbconfig_h_included__ */ |