diff options
Diffstat (limited to 'keyboard/atreus')
| -rw-r--r-- | keyboard/atreus/Makefile | 17 | ||||
| -rw-r--r-- | keyboard/atreus/README.md | 10 | ||||
| -rw-r--r-- | keyboard/atreus/atreus.h | 19 | ||||
| -rw-r--r-- | keyboard/atreus/config.h | 10 | ||||
| -rw-r--r-- | keyboard/atreus/keymaps/keymap_gerb.c | 66 |
5 files changed, 103 insertions, 19 deletions
diff --git a/keyboard/atreus/Makefile b/keyboard/atreus/Makefile index e1ebee47bd..2e542d62ed 100644 --- a/keyboard/atreus/Makefile +++ b/keyboard/atreus/Makefile @@ -58,6 +58,15 @@ else SRC := keymaps/keymap_default.c $(SRC) endif +ifdef TEENSY2 + OPT_DEFS += -DATREUS_TEENSY2 + ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex +else + OPT_DEFS += -DATREUS_ASTAR + ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) +endif + CONFIG_H = config.h # MCU name @@ -114,8 +123,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # comment out to disable the options. # #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -#EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE @@ -137,3 +146,7 @@ VPATH += $(TMK_DIR) include $(TOP_DIR)/quantum/quantum.mk +USB ?= /dev/cu.usbmodem1411 + +upload: build + $(ATRUES_UPLOAD_COMMAND) diff --git a/keyboard/atreus/README.md b/keyboard/atreus/README.md index 75f198fd1c..4db7ac1203 100644 --- a/keyboard/atreus/README.md +++ b/keyboard/atreus/README.md @@ -1,10 +1,6 @@ atreus keyboard firmware ====================== -## Note - -This is for the Teensy2 hand wired boards only. - ## Quantum MK Firmware You have access to a bunch of goodies! Check out the Makefile to enable/disable some of the features. Uncomment the `#` to enable them. Setting them to `no` does nothing and will only confuse future you. @@ -14,6 +10,12 @@ You have access to a bunch of goodies! Check out the Makefile to enable/disable # UNICODE_ENABLE = yes # Unicode support - this is commented out, just as an example. You have to use #, not // BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID +## Atreus specific information + +These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2, one powered by an A-Star. This repository currently assumes that you have an A-Star powered Atreus. If you are using a Teensy2, specify that by adding `TEENSY2=yes` to your `make` commands. + +If you are coming from the [atreus-firmware](https://github.com/technomancy/atreus-firmware), we've also brought forward the `make upload` command for you to use. + ## Quick aliases to common actions Your keymap can include shortcuts to common operations (called "function actions" in tmk). diff --git a/keyboard/atreus/atreus.h b/keyboard/atreus/atreus.h index 29d1d18bac..9dd77859f9 100644 --- a/keyboard/atreus/atreus.h +++ b/keyboard/atreus/atreus.h @@ -7,21 +7,20 @@ #include <stddef.h> // This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout // The first section contains all of the arguements // The second converts the arguments into a two-dimensional array #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k37, k38, k39, k3a, k3b \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a \ ) \ { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ - { k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b } \ -} + { k00, k01, k02, k03, k04, KC_NO, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, KC_NO, k15, k16, k17, k18, k19 }, \ + { k20, k21, k22, k23, k24, k35, k25, k26, k27, k28, k29 }, \ + { k2a, k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a } \ +} void * matrix_init_user(void); void * matrix_scan_user(void); diff --git a/keyboard/atreus/config.h b/keyboard/atreus/config.h index 733f579d43..ca0cd7e47a 100644 --- a/keyboard/atreus/config.h +++ b/keyboard/atreus/config.h @@ -33,11 +33,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 4 #define MATRIX_COLS 11 -// Planck PCB default pin-out // Change this to how you wired your keyboard // COLS: Left to right, ROWS: Top to bottom -#define COLS (int []){ F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0} -#define ROWS (int []){ D0, D1, D2, D3 } +#if defined(ATREUS_ASTAR) + #define COLS (int []){ B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 } + #define ROWS (int []){ D0, D1, D3, D2 } +#elif defined(ATREUS_TEENSY2) + #define COLS (int []){ F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0} + #define ROWS (int []){ D0, D1, D2, D3 } +#endif /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboard/atreus/keymaps/keymap_gerb.c b/keyboard/atreus/keymaps/keymap_gerb.c new file mode 100644 index 0000000000..1ba3942e3b --- /dev/null +++ b/keyboard/atreus/keymaps/keymap_gerb.c @@ -0,0 +1,66 @@ +// This is the personal keymap of Chris Gerber (@gerbercj). I haven't worked out the kinks +// with the Colemak and Dvorak support yet, but everything else works nicely. + +#include "atreus.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _CM 1 +#define _DV 2 +#define _L1 3 +#define _L2 4 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QW] = { /* Qwerty */ + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P }, + {KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_H, KC_J, KC_K, KC_L, KC_SCLN}, + {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH}, + {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT } + }, + [_CM] = { /* Colemak */ + {KC_Q, KC_W, KC_F, KC_P, KC_G, KC_NO, KC_J, KC_L, KC_U, KC_Y, KC_SCLN}, + {KC_A, KC_R, KC_S, KC_T, KC_D, KC_NO, KC_H, KC_N, KC_E, KC_I, KC_O }, + {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH}, + {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT } + }, + [_DV] = { /* Dvorak */ + {KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_NO, KC_F, KC_G, KC_C, KC_R, KC_L }, + {KC_A, KC_O, KC_E, KC_U, KC_I, KC_NO, KC_D, KC_H, KC_T, KC_N, KC_S }, + {KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LALT, KC_B, KC_M, KC_W, KC_V, KC_Z }, + {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, MO(_L1), KC_MINS, KC_SLSH, KC_ENT } + }, + [_L1] = { /* LAYER 1 */ + {KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_NO, KC_VOLU, KC_7, KC_8, KC_9, KC_LBRC}, + {KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_NO, KC_VOLD, KC_4, KC_5, KC_6, KC_RBRC}, + {KC_GRV, KC_MPRV, KC_MPLY, KC_MNXT, KC_MINS, KC_LALT, KC_MUTE, KC_1, KC_2, KC_3, KC_BSLS}, + {TG(_L2), KC_APP, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL } + }, + [_L2] = { /* LAYER 2 */ + {KC_TRNS, KC_WH_L, KC_MS_U, KC_WH_R, KC_WH_U, KC_NO, DF(_QW), KC_F7, KC_F8, KC_F9, KC_F10 }, + {KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, KC_NO, DF(_CM), KC_F6, KC_F5, KC_F6, KC_F11 }, + {KC_BTN4, KC_BTN1, KC_BTN2, KC_BTN3, KC_BTN4, KC_LALT, DF(_DV), KC_F1, KC_F2, KC_F3, KC_F12 }, + {KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, RESET } + } +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; |