diff options
Diffstat (limited to 'drivers/avr')
| -rw-r--r-- | drivers/avr/analog.c | 53 | ||||
| -rw-r--r-- | drivers/avr/analog.h | 26 | ||||
| -rw-r--r--[-rwxr-xr-x] | drivers/avr/apa102.c | 147 | ||||
| -rw-r--r--[-rwxr-xr-x] | drivers/avr/apa102.h | 5 | ||||
| -rw-r--r-- | drivers/avr/glcdfont.c | 280 | ||||
| -rw-r--r-- | drivers/avr/hd44780.c | 510 | ||||
| -rw-r--r-- | drivers/avr/hd44780.h | 303 | ||||
| -rw-r--r--[-rwxr-xr-x] | drivers/avr/i2c_master.c | 260 | ||||
| -rw-r--r--[-rwxr-xr-x] | drivers/avr/i2c_master.h | 12 | ||||
| -rw-r--r--[-rwxr-xr-x] | drivers/avr/i2c_slave.c | 18 | ||||
| -rw-r--r--[-rwxr-xr-x] | drivers/avr/i2c_slave.h | 2 | ||||
| -rw-r--r-- | drivers/avr/pro_micro.h | 270 | ||||
| -rw-r--r-- | drivers/avr/ssd1306.c | 427 | ||||
| -rw-r--r-- | drivers/avr/ssd1306.h | 84 | ||||
| -rw-r--r-- | drivers/avr/ws2812.c | 384 | ||||
| -rw-r--r-- | drivers/avr/ws2812.h | 17 |
16 files changed, 1195 insertions, 1603 deletions
diff --git a/drivers/avr/analog.c b/drivers/avr/analog.c index 1ec38df75d..1a8da4261d 100644 --- a/drivers/avr/analog.c +++ b/drivers/avr/analog.c @@ -21,49 +21,38 @@ #include <stdint.h> #include "analog.h" +static uint8_t aref = (1 << REFS0); // default to AREF = Vcc -static uint8_t aref = (1<<REFS0); // default to AREF = Vcc - - -void analogReference(uint8_t mode) -{ - aref = mode & 0xC0; -} - +void analogReference(uint8_t mode) { aref = mode & 0xC0; } // Arduino compatible pin input -int16_t analogRead(uint8_t pin) -{ +int16_t analogRead(uint8_t pin) { #if defined(__AVR_ATmega32U4__) - static const uint8_t PROGMEM pin_to_mux[] = { - 0x00, 0x01, 0x04, 0x05, 0x06, 0x07, - 0x25, 0x24, 0x23, 0x22, 0x21, 0x20}; - if (pin >= 12) return 0; - return adc_read(pgm_read_byte(pin_to_mux + pin)); + static const uint8_t PROGMEM pin_to_mux[] = {0x00, 0x01, 0x04, 0x05, 0x06, 0x07, 0x25, 0x24, 0x23, 0x22, 0x21, 0x20}; + if (pin >= 12) return 0; + return adc_read(pgm_read_byte(pin_to_mux + pin)); #elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) - if (pin >= 8) return 0; - return adc_read(pin); + if (pin >= 8) return 0; + return adc_read(pin); #else - return 0; + return 0; #endif } // Mux input -int16_t adc_read(uint8_t mux) -{ +int16_t adc_read(uint8_t mux) { #if defined(__AVR_AT90USB162__) - return 0; + return 0; #else - uint8_t low; - - ADCSRA = (1<<ADEN) | ADC_PRESCALER; // enable ADC - ADCSRB = (1<<ADHSM) | (mux & 0x20); // high speed mode - ADMUX = aref | (mux & 0x1F); // configure mux input - ADCSRA = (1<<ADEN) | ADC_PRESCALER | (1<<ADSC); // start the conversion - while (ADCSRA & (1<<ADSC)) ; // wait for result - low = ADCL; // must read LSB first - return (ADCH << 8) | low; // must read MSB only once! + uint8_t low; + + ADCSRA = (1 << ADEN) | ADC_PRESCALER; // enable ADC + ADCSRB = (1 << ADHSM) | (mux & 0x20); // high speed mode + ADMUX = aref | (mux & 0x1F); // configure mux input + ADCSRA = (1 << ADEN) | ADC_PRESCALER | (1 << ADSC); // start the conversion + while (ADCSRA & (1 << ADSC)) + ; // wait for result + low = ADCL; // must read LSB first + return (ADCH << 8) | low; // must read MSB only once! #endif } - - diff --git a/drivers/avr/analog.h b/drivers/avr/analog.h index 8d93de7dc2..32452a1ec2 100644 --- a/drivers/avr/analog.h +++ b/drivers/avr/analog.h @@ -19,34 +19,34 @@ #include <stdint.h> -void analogReference(uint8_t mode); +void analogReference(uint8_t mode); int16_t analogRead(uint8_t pin); int16_t adc_read(uint8_t mux); -#define ADC_REF_POWER (1<<REFS0) -#define ADC_REF_INTERNAL ((1<<REFS1) | (1<<REFS0)) -#define ADC_REF_EXTERNAL (0) +#define ADC_REF_POWER (1 << REFS0) +#define ADC_REF_INTERNAL ((1 << REFS1) | (1 << REFS0)) +#define ADC_REF_EXTERNAL (0) // These prescaler values are for high speed mode, ADHSM = 1 #if F_CPU == 16000000L -#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS1)) +# define ADC_PRESCALER ((1 << ADPS2) | (1 << ADPS1)) #elif F_CPU == 8000000L -#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS0)) +# define ADC_PRESCALER ((1 << ADPS2) | (1 << ADPS0)) #elif F_CPU == 4000000L -#define ADC_PRESCALER ((1<<ADPS2)) +# define ADC_PRESCALER ((1 << ADPS2)) #elif F_CPU == 2000000L -#define ADC_PRESCALER ((1<<ADPS1) | (1<<ADPS0)) +# define ADC_PRESCALER ((1 << ADPS1) | (1 << ADPS0)) #elif F_CPU == 1000000L -#define ADC_PRESCALER ((1<<ADPS1)) +# define ADC_PRESCALER ((1 << ADPS1)) #else -#define ADC_PRESCALER ((1<<ADPS0)) +# define ADC_PRESCALER ((1 << ADPS0)) #endif // some avr-libc versions do not properly define ADHSM #if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) -#if !defined(ADHSM) -#define ADHSM (7) -#endif +# if !defined(ADHSM) +# define ADHSM (7) +# endif #endif #endif diff --git a/drivers/avr/apa102.c b/drivers/avr/apa102.c index 55a0d57778..f4d97a1589 100755..100644 --- a/drivers/avr/apa102.c +++ b/drivers/avr/apa102.c @@ -1,24 +1,24 @@ /* -* APA102 lib V1.0a -* -* Controls APA102 RGB-LEDs -* Author: Mikkel (Duckle29 on github) -* -* Dec 22th, 2017 v1.0a Initial Version -* -* This program is free software: you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation, either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ + * APA102 lib V1.0a + * + * Controls APA102 RGB-LEDs + * Author: Mikkel (Duckle29 on github) + * + * Dec 22th, 2017 v1.0a Initial Version + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include "apa102.h" #include <avr/interrupt.h> @@ -27,75 +27,70 @@ #include "debug.h" // Setleds for standard RGB -void inline apa102_setleds(LED_TYPE *ledarray, uint16_t leds){ - apa102_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF), _BV(RGB_CLK_PIN & 0xF)); -} +void inline apa102_setleds(LED_TYPE *ledarray, uint16_t leds) { apa102_setleds_pin(ledarray, leds, _BV(RGB_DI_PIN & 0xF), _BV(RGB_CLK_PIN & 0xF)); } -void static inline apa102_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask_DI, uint8_t pinmask_CLK){ - pinMode(RGB_DI_PIN, PinDirectionOutput); - pinMode(RGB_CLK_PIN, PinDirectionOutput); +void static inline apa102_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask_DI, uint8_t pinmask_CLK) { + pinMode(RGB_DI_PIN, PinDirectionOutput); + pinMode(RGB_CLK_PIN, PinDirectionOutput); - apa102_send_array((uint8_t*)ledarray,leds) + apa102_send_array((uint8_t *)ledarray, leds) } -void apa102_send_array(uint8_t *data, uint16_t leds){ // Data is struct of 3 bytes. RGB - leds is number of leds in data - apa102_start_frame(); - while(leds--){ - apa102_send_frame(0xFF000000 | (data->b << 16) | (data->g << 8) | data->r); - data++; - } - apa102_end_frame(leds); +void apa102_send_array(uint8_t *data, uint16_t leds) { // Data is struct of 3 bytes. RGB - leds is number of leds in data + apa102_start_frame(); + while (leds--) { + apa102_send_frame(0xFF000000 | (data->b << 16) | (data->g << 8) | data->r); + data++; + } + apa102_end_frame(leds); } -void apa102_send_frame(uint32_t frame){ - for(uint32_t i=0xFF; i>0;){ - apa102_send_byte(frame & i); - i = i << 8; - } +void apa102_send_frame(uint32_t frame) { + for (uint32_t i = 0xFF; i > 0;) { + apa102_send_byte(frame & i); + i = i << 8; + } } -void apa102_start_frame(){ - apa102_send_frame(0); -} +void apa102_start_frame() { apa102_send_frame(0); } -void apa102_end_frame(uint16_t leds) -{ - // This function has been taken from: https://github.com/pololu/apa102-arduino/blob/master/APA102.h - // and adapted. The code is MIT licensed. I think thats compatible? +void apa102_end_frame(uint16_t leds) { + // This function has been taken from: https://github.com/pololu/apa102-arduino/blob/master/APA102.h + // and adapted. The code is MIT licensed. I think thats compatible? - // We need to send some more bytes to ensure that all the LEDs in the - // chain see their new color and start displaying it. - // - // The data stream seen by the last LED in the chain will be delayed by - // (count - 1) clock edges, because each LED before it inverts the clock - // line and delays the data by one clock edge. Therefore, to make sure - // the last LED actually receives the data we wrote, the number of extra - // edges we send at the end of the frame must be at least (count - 1). - // For the APA102C, that is sufficient. - // - // The SK9822 only updates after it sees 32 zero bits followed by one more - // rising edge. To avoid having the update time depend on the color of - // the last LED, we send a dummy 0xFF byte. (Unfortunately, this means - // that partial updates of the beginning of an LED strip are not possible; - // the LED after the last one you are trying to update will be black.) - // After that, to ensure that the last LED in the chain sees 32 zero bits - // and a rising edge, we need to send at least 65 + (count - 1) edges. It - // is sufficent and simpler to just send (5 + count/16) bytes of zeros. - // - // We are ignoring the specification for the end frame in the APA102/SK9822 - // datasheets because it does not actually ensure that all the LEDs will - // start displaying their new colors right away. + // We need to send some more bytes to ensure that all the LEDs in the + // chain see their new color and start displaying it. + // + // The data stream seen by the last LED in the chain will be delayed by + // (count - 1) clock edges, because each LED before it inverts the clock + // line and delays the data by one clock edge. Therefore, to make sure + // the last LED actually receives the data we wrote, the number of extra + // edges we send at the end of the frame must be at least (count - 1). + // For the APA102C, that is sufficient. + // + // The SK9822 only updates after it sees 32 zero bits followed by one more + // rising edge. To avoid having the update time depend on the color of + // the last LED, we send a dummy 0xFF byte. (Unfortunately, this means + // that partial updates of the beginning of an LED strip are not possible; + // the LED after the last one you are trying to update will be black.) + // After that, to ensure that the last LED in the chain sees 32 zero bits + // and a rising edge, we need to send at least 65 + (count - 1) edges. It + // is sufficent and simpler to just send (5 + count/16) bytes of zeros. + // + // We are ignoring the specification for the end frame in the APA102/SK9822 + // datasheets because it does not actually ensure that all the LEDs will + // start displaying their new colors right away. - apa102_send_byte(0xFF); - for (uint16_t i = 0; i < 5 + leds / 16; i++){ - apa102_send_byte(0); - } + apa102_send_byte(0xFF); + for (uint16_t i = 0; i < 5 + leds / 16; i++) { + apa102_send_byte(0); + } } -void apa102_send_byte(uint8_t byte){ - uint8_t i; - for (i = 0; i < 8; i++){ +void apa102_send_byte(uint8_t byte) { + uint8_t i; + for (i = 0; i < 8; i++) { digitalWrite(RGB_DI_PIN, !!(byte & (1 << (7-i))); digitalWrite(RGB_CLK_PIN, PinLevelHigh); - } + } } diff --git a/drivers/avr/apa102.h b/drivers/avr/apa102.h index 5d852e0673..d4c1e18ee1 100755..100644 --- a/drivers/avr/apa102.h +++ b/drivers/avr/apa102.h @@ -27,7 +27,6 @@ #include "color.h" - /* User Interface * * Input: @@ -41,6 +40,6 @@ * - Wait 50�s to reset the LEDs */ -void apa102_setleds (LED_TYPE *ledarray, uint16_t number_of_leds); -void apa102_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask); +void apa102_setleds(LED_TYPE *ledarray, uint16_t number_of_leds); +void apa102_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pinmask); void apa102_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds); diff --git a/drivers/avr/glcdfont.c b/drivers/avr/glcdfont.c index 6f88bd23a7..2c332ea6db 100644 --- a/drivers/avr/glcdfont.c +++ b/drivers/avr/glcdfont.c @@ -5,272 +5,30 @@ #define FONT5X7_H #ifdef __AVR__ - #include <avr/io.h> - #include <avr/pgmspace.h> +# include <avr/io.h> +# include <avr/pgmspace.h> #elif defined(ESP8266) - #include <pgmspace.h> +# include <pgmspace.h> #else - #define PROGMEM +# define PROGMEM #endif // Standard ASCII 5x7 font static const unsigned char font[] PROGMEM = { - 0x00, 0x00, 0x00, 0x00, 0x00, - 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, - 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, - 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, - 0x18, 0x3C, 0x7E, 0x3C, 0x18, - 0x1C, 0x57, 0x7D, 0x57, 0x1C, - 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, - 0x00, 0x18, 0x3C, 0x18, 0x00, - 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, - 0x00, 0x18, 0x24, 0x18, 0x00, - 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, - 0x30, 0x48, 0x3A, 0x06, 0x0E, - 0x26, 0x29, 0x79, 0x29, 0x26, - 0x40, 0x7F, 0x05, 0x05, 0x07, - 0x40, 0x7F, 0x05, 0x25, 0x3F, - 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, - 0x7F, 0x3E, 0x1C, 0x1C, 0x08, - 0x08, 0x1C, 0x1C, 0x3E, 0x7F, - 0x14, 0x22, 0x7F, 0x22, 0x14, - 0x5F, 0x5F, 0x00, 0x5F, 0x5F, - 0x06, 0x09, 0x7F, 0x01, 0x7F, - 0x00, 0x66, 0x89, 0x95, 0x6A, - 0x60, 0x60, 0x60, 0x60, 0x60, - 0x94, 0xA2, 0xFF, 0xA2, 0x94, - 0x08, 0x04, 0x7E, 0x04, 0x08, - 0x10, 0x20, 0x7E, 0x20, 0x10, - 0x08, 0x08, 0x2A, 0x1C, 0x08, - 0x08, 0x1C, 0x2A, 0x08, 0x08, - 0x1E, 0x10, 0x10, 0x10, 0x10, - 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, - 0x30, 0x38, 0x3E, 0x38, 0x30, - 0x06, 0x0E, 0x3E, 0x0E, 0x06, - 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x5F, 0x00, 0x00, - 0x00, 0x07, 0x00, 0x07, 0x00, - 0x14, 0x7F, 0x14, 0x7F, 0x14, - 0x24, 0x2A, 0x7F, 0x2A, 0x12, - 0x23, 0x13, 0x08, 0x64, 0x62, - 0x36, 0x49, 0x56, 0x20, 0x50, - 0x00, 0x08, 0x07, 0x03, 0x00, - 0x00, 0x1C, 0x22, 0x41, 0x00, - 0x00, 0x41, 0x22, 0x1C, 0x00, - 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, - 0x08, 0x08, 0x3E, 0x08, 0x08, - 0x00, 0x80, 0x70, 0x30, 0x00, - 0x08, 0x08, 0x08, 0x08, 0x08, - 0x00, 0x00, 0x60, 0x60, 0x00, - 0x20, 0x10, 0x08, 0x04, 0x02, - 0x3E, 0x51, 0x49, 0x45, 0x3E, - 0x00, 0x42, 0x7F, 0x40, 0x00, - 0x72, 0x49, 0x49, 0x49, 0x46, - 0x21, 0x41, 0x49, 0x4D, 0x33, - 0x18, 0x14, 0x12, 0x7F, 0x10, - 0x27, 0x45, 0x45, 0x45, 0x39, - 0x3C, 0x4A, 0x49, 0x49, 0x31, - 0x41, 0x21, 0x11, 0x09, 0x07, - 0x36, 0x49, 0x49, 0x49, 0x36, - 0x46, 0x49, 0x49, 0x29, 0x1E, - 0x00, 0x00, 0x14, 0x00, 0x00, - 0x00, 0x40, 0x34, 0x00, 0x00, - 0x00, 0x08, 0x14, 0x22, 0x41, - 0x14, 0x14, 0x14, 0x14, 0x14, - 0x00, 0x41, 0x22, 0x14, 0x08, - 0x02, 0x01, 0x59, 0x09, 0x06, - 0x3E, 0x41, 0x5D, 0x59, 0x4E, - 0x7C, 0x12, 0x11, 0x12, 0x7C, - 0x7F, 0x49, 0x49, 0x49, 0x36, - 0x3E, 0x41, 0x41, 0x41, 0x22, - 0x7F, 0x41, 0x41, 0x41, 0x3E, - 0x7F, 0x49, 0x49, 0x49, 0x41, - 0x7F, 0x09, 0x09, 0x09, 0x01, - 0x3E, 0x41, 0x41, 0x51, 0x73, - 0x7F, 0x08, 0x08, 0x08, 0x7F, - 0x00, 0x41, 0x7F, 0x41, 0x00, - 0x20, 0x40, 0x41, 0x3F, 0x01, - 0x7F, 0x08, 0x14, 0x22, 0x41, - 0x7F, 0x40, 0x40, 0x40, 0x40, - 0x7F, 0x02, 0x1C, 0x02, 0x7F, - 0x7F, 0x04, 0x08, 0x10, 0x7F, - 0x3E, 0x41, 0x41, 0x41, 0x3E, - 0x7F, 0x09, 0x09, 0x09, 0x06, - 0x3E, 0x41, 0x51, 0x21, 0x5E, - 0x7F, 0x09, 0x19, 0x29, 0x46, - 0x26, 0x49, 0x49, 0x49, 0x32, - 0x03, 0x01, 0x7F, 0x01, 0x03, - 0x3F, 0x40, 0x40, 0x40, 0x3F, - 0x1F, 0x20, 0x40, 0x20, 0x1F, - 0x3F, 0x40, 0x38, 0x40, 0x3F, - 0x63, 0x14, 0x08, 0x14, 0x63, - 0x03, 0x04, 0x78, 0x04, 0x03, - 0x61, 0x59, 0x49, 0x4D, 0x43, - 0x00, 0x7F, 0x41, 0x41, 0x41, - 0x02, 0x04, 0x08, 0x10, 0x20, - 0x00, 0x41, 0x41, 0x41, 0x7F, - 0x04, 0x02, 0x01, 0x02, 0x04, - 0x40, 0x40, 0x40, 0x40, 0x40, - 0x00, 0x03, 0x07, 0x08, 0x00, - 0x20, 0x54, 0x54, 0x78, 0x40, - 0x7F, 0x28, 0x44, 0x44, 0x38, - 0x38, 0x44, 0x44, 0x44, 0x28, - 0x38, 0x44, 0x44, 0x28, 0x7F, - 0x38, 0x54, 0x54, 0x54, 0x18, - 0x00, 0x08, 0x7E, 0x09, 0x02, - 0x18, 0xA4, 0xA4, 0x9C, 0x78, - 0x7F, 0x08, 0x04, 0x04, 0x78, - 0x00, 0x44, 0x7D, 0x40, 0x00, - 0x20, 0x40, 0x40, 0x3D, 0x00, - 0x7F, 0x10, 0x28, 0x44, 0x00, - 0x00, 0x41, 0x7F, 0x40, 0x00, - 0x7C, 0x04, 0x78, 0x04, 0x78, - 0x7C, 0x08, 0x04, 0x04, 0x78, - 0x38, 0x44, 0x44, 0x44, 0x38, - 0xFC, 0x18, 0x24, 0x24, 0x18, - 0x18, 0x24, 0x24, 0x18, 0xFC, - 0x7C, 0x08, 0x04, 0x04, 0x08, - 0x48, 0x54, 0x54, 0x54, 0x24, - 0x04, 0x04, 0x3F, 0x44, 0x24, - 0x3C, 0x40, 0x40, 0x20, 0x7C, - 0x1C, 0x20, 0x40, 0x20, 0x1C, - 0x3C, 0x40, 0x30, 0x40, 0x3C, - 0x44, 0x28, 0x10, 0x28, 0x44, - 0x4C, 0x90, 0x90, 0x90, 0x7C, - 0x44, 0x64, 0x54, 0x4C, 0x44, - 0x00, 0x08, 0x36, 0x41, 0x00, - 0x00, 0x00, 0x77, 0x00, 0x00, - 0x00, 0x41, 0x36, 0x08, 0x00, - 0x02, 0x01, 0x02, 0x04, 0x02, - 0x3C, 0x26, 0x23, 0x26, 0x3C, - 0x1E, 0xA1, 0xA1, 0x61, 0x12, - 0x3A, 0x40, 0x40, 0x20, 0x7A, - 0x38, 0x54, 0x54, 0x55, 0x59, - 0x21, 0x55, 0x55, 0x79, 0x41, - 0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut - 0x21, 0x55, 0x54, 0x78, 0x40, - 0x20, 0x54, 0x55, 0x79, 0x40, - 0x0C, 0x1E, 0x52, 0x72, 0x12, - 0x39, 0x55, 0x55, 0x55, 0x59, - 0x39, 0x54, 0x54, 0x54, 0x59, - 0x39, 0x55, 0x54, 0x54, 0x58, - 0x00, 0x00, 0x45, 0x7C, 0x41, - 0x00, 0x02, 0x45, 0x7D, 0x42, - 0x00, 0x01, 0x45, 0x7C, 0x40, - 0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut - 0xF0, 0x28, 0x25, 0x28, 0xF0, - 0x7C, 0x54, 0x55, 0x45, 0x00, - 0x20, 0x54, 0x54, 0x7C, 0x54, - 0x7C, 0x0A, 0x09, 0x7F, 0x49, - 0x32, 0x49, 0x49, 0x49, 0x32, - 0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut - 0x32, 0x4A, 0x48, 0x48, 0x30, - 0x3A, 0x41, 0x41, 0x21, 0x7A, - 0x3A, 0x42, 0x40, 0x20, 0x78, - 0x00, 0x9D, 0xA0, 0xA0, 0x7D, - 0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut - 0x3D, 0x40, 0x40, 0x40, 0x3D, - 0x3C, 0x24, 0xFF, 0x24, 0x24, - 0x48, 0x7E, 0x49, 0x43, 0x66, - 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, - 0xFF, 0x09, 0x29, 0xF6, 0x20, - 0xC0, 0x88, 0x7E, 0x09, 0x03, - 0x20, 0x54, 0x54, 0x79, 0x41, - 0x00, 0x00, 0x44, 0x7D, 0x41, - 0x30, 0x48, 0x48, 0x4A, 0x32, - 0x38, 0x40, 0x40, 0x22, 0x7A, - 0x00, 0x7A, 0x0A, 0x0A, 0x72, - 0x7D, 0x0D, 0x19, 0x31, 0x7D, - 0x26, 0x29, 0x29, 0x2F, 0x28, - 0x26, 0x29, 0x29, 0x29, 0x26, - 0x30, 0x48, 0x4D, 0x40, 0x20, - 0x38, 0x08, 0x08, 0x08, 0x08, - 0x08, 0x08, 0x08, 0x08, 0x38, - 0x2F, 0x10, 0xC8, 0xAC, 0xBA, - 0x2F, 0x10, 0x28, 0x34, 0xFA, - 0x00, 0x00, 0x7B, 0x00, 0x00, - 0x08, 0x14, 0x2A, 0x14, 0x22, - 0x22, 0x14, 0x2A, 0x14, 0x08, - 0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code - 0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block - 0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block - 0x00, 0x00, 0x00, 0xFF, 0x00, - 0x10, 0x10, 0x10, 0xFF, 0x00, - 0x14, 0x14, 0x14, 0xFF, 0x00, - 0x10, 0x10, 0xFF, 0x00, 0xFF, - 0x10, 0x10, 0xF0, 0x10, 0xF0, - 0x14, 0x14, 0x14, 0xFC, 0x00, - 0x14, 0x14, 0xF7, 0x00, 0xFF, - 0x00, 0x00, 0xFF, 0x00, 0xFF, - 0x14, 0x14, 0xF4, 0x04, 0xFC, - 0x14, 0x14, 0x17, 0x10, 0x1F, - 0x10, 0x10, 0x1F, 0x10, 0x1F, - 0x14, 0x14, 0x14, 0x1F, 0x00, - 0x10, 0x10, 0x10, 0xF0, 0x00, - 0x00, 0x00, 0x00, 0x1F, 0x10, - 0x10, 0x10, 0x10, 0x1F, 0x10, - 0x10, 0x10, 0x10, 0xF0, 0x10, - 0x00, 0x00, 0x00, 0xFF, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0xFF, 0x10, - 0x00, 0x00, 0x00, 0xFF, 0x14, - 0x00, 0x00, 0xFF, 0x00, 0xFF, - 0x00, 0x00, 0x1F, 0x10, 0x17, - 0x00, 0x00, 0xFC, 0x04, 0xF4, - 0x14, 0x14, 0x17, 0x10, 0x17, - 0x14, 0x14, 0xF4, 0x04, 0xF4, - 0x00, 0x00, 0xFF, 0x00, 0xF7, - 0x14, 0x14, 0x14, 0x14, 0x14, - 0x14, 0x14, 0xF7, 0x00, 0xF7, - 0x14, 0x14, 0x14, 0x17, 0x14, - 0x10, 0x10, 0x1F, 0x10, 0x1F, - 0x14, 0x14, 0x14, 0xF4, 0x14, - 0x10, 0x10, 0xF0, 0x10, 0xF0, - 0x00, 0x00, 0x1F, 0x10, 0x1F, - 0x00, 0x00, 0x00, 0x1F, 0x14, - 0x00, 0x00, 0x00, 0xFC, 0x14, - 0x00, 0x00, 0xF0, 0x10, 0xF0, - 0x10, 0x10, 0xFF, 0x10, 0xFF, - 0x14, 0x14, 0x14, 0xFF, 0x14, - 0x10, 0x10, 0x10, 0x1F, 0x00, - 0x00, 0x00, 0x00, 0xF0, 0x10, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, - 0xFF, 0xFF, 0xFF, 0x00, 0x00, - 0x00, 0x00, 0x00, 0xFF, 0xFF, - 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, - 0x38, 0x44, 0x44, 0x38, 0x44, - 0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta - 0x7E, 0x02, 0x02, 0x06, 0x06, - 0x02, 0x7E, 0x02, 0x7E, 0x02, - 0x63, 0x55, 0x49, 0x41, 0x63, - 0x38, 0x44, 0x44, 0x3C, 0x04, - 0x40, 0x7E, 0x20, 0x1E, 0x20, - 0x06, 0x02, 0x7E, 0x02, 0x02, - 0x99, 0xA5, 0xE7, 0xA5, 0x99, - 0x1C, 0x2A, 0x49, 0x2A, 0x1C, - 0x4C, 0x72, 0x01, 0x72, 0x4C, - 0x30, 0x4A, 0x4D, 0x4D, 0x30, - 0x30, 0x48, 0x78, 0x48, 0x30, - 0xBC, 0x62, 0x5A, 0x46, 0x3D, - 0x3E, 0x49, 0x49, 0x49, 0x00, - 0x7E, 0x01, 0x01, 0x01, 0x7E, - 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, - 0x44, 0x44, 0x5F, 0x44, 0x44, - 0x40, 0x51, 0x4A, 0x44, 0x40, - 0x40, 0x44, 0x4A, 0x51, 0x40, - 0x00, 0x00, 0xFF, 0x01, 0x03, - 0xE0, 0x80, 0xFF, 0x00, 0x00, - 0x08, 0x08, 0x6B, 0x6B, 0x08, - 0x36, 0x12, 0x36, 0x24, 0x36, - 0x06, 0x0F, 0x09, 0x0F, 0x06, - 0x00, 0x00, 0x18, 0x18, 0x00, - 0x00, 0x00, 0x10, 0x10, 0x00, - 0x30, 0x40, 0xFF, 0x01, 0x01, - 0x00, 0x1F, 0x01, 0x01, 0x1E, - 0x00, 0x19, 0x1D, 0x17, 0x12, - 0x00, 0x3C, 0x3C, 0x3C, 0x3C, - 0x00, 0x00, 0x00, 0x00, 0x00 // #255 NBSP + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, 0x18, 0x3C, 0x18, 0x00, 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, 0x18, 0x24, 0x18, 0x00, 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x26, 0x29, 0x79, 0x29, 0x26, 0x40, 0x7F, 0x05, 0x05, 0x07, 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x14, 0x22, 0x7F, 0x22, 0x14, 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, 0x66, 0x89, 0x95, 0x6A, 0x60, 0x60, 0x60, 0x60, 0x60, 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x08, 0x04, 0x7E, 0x04, 0x08, 0x10, 0x20, 0x7E, 0x20, 0x10, 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x23, 0x13, 0x08, 0x64, 0x62, 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, 0x41, 0x22, 0x1C, 0x00, 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, 0x80, 0x70, 0x30, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x60, 0x60, 0x00, 0x20, 0x10, 0x08, 0x04, 0x02, 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, 0x42, 0x7F, 0x40, 0x00, 0x72, 0x49, 0x49, 0x49, 0x46, 0x21, 0x41, 0x49, 0x4D, 0x33, 0x18, 0x14, 0x12, 0x7F, 0x10, 0x27, 0x45, 0x45, 0x45, 0x39, 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x41, 0x21, 0x11, 0x09, 0x07, 0x36, 0x49, 0x49, 0x49, 0x36, 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x40, 0x34, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, 0x41, 0x22, 0x14, 0x08, 0x02, 0x01, 0x59, 0x09, 0x06, 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x7F, 0x49, 0x49, 0x49, 0x36, 0x3E, 0x41, 0x41, 0x41, 0x22, 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x49, 0x49, 0x49, 0x41, 0x7F, 0x09, 0x09, 0x09, 0x01, 0x3E, 0x41, 0x41, 0x51, 0x73, 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, 0x41, 0x7F, 0x41, 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01, 0x7F, 0x08, 0x14, 0x22, 0x41, 0x7F, 0x40, 0x40, 0x40, 0x40, 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x09, 0x09, 0x09, 0x06, 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x7F, 0x09, 0x19, 0x29, 0x46, 0x26, 0x49, 0x49, 0x49, 0x32, 0x03, 0x01, 0x7F, 0x01, 0x03, 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x63, 0x14, 0x08, 0x14, 0x63, 0x03, 0x04, 0x78, 0x04, 0x03, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, 0x41, 0x41, 0x41, 0x7F, 0x04, 0x02, 0x01, 0x02, 0x04, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x03, 0x07, 0x08, 0x00, 0x20, 0x54, 0x54, 0x78, 0x40, 0x7F, 0x28, 0x44, 0x44, 0x38, 0x38, 0x44, 0x44, 0x44, 0x28, 0x38, 0x44, 0x44, 0x28, 0x7F, 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, 0x08, 0x7E, 0x09, 0x02, 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, 0x44, 0x7D, 0x40, 0x00, 0x20, 0x40, 0x40, 0x3D, 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00, 0x7C, 0x04, 0x78, 0x04, 0x78, 0x7C, 0x08, 0x04, 0x04, 0x78, 0x38, 0x44, 0x44, 0x44, 0x38, 0xFC, 0x18, 0x24, 0x24, 0x18, 0x18, 0x24, 0x24, 0x18, 0xFC, 0x7C, 0x08, 0x04, 0x04, 0x08, 0x48, 0x54, 0x54, 0x54, 0x24, 0x04, 0x04, 0x3F, 0x44, 0x24, 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x3C, 0x40, 0x30, 0x40, 0x3C, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, 0x41, 0x36, 0x08, 0x00, 0x02, 0x01, 0x02, 0x04, 0x02, 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x1E, 0xA1, 0xA1, 0x61, 0x12, 0x3A, 0x40, 0x40, 0x20, 0x7A, 0x38, 0x54, 0x54, 0x55, 0x59, 0x21, 0x55, 0x55, 0x79, 0x41, 0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut + 0x21, 0x55, 0x54, 0x78, 0x40, 0x20, 0x54, 0x55, 0x79, 0x40, 0x0C, 0x1E, 0x52, 0x72, 0x12, 0x39, 0x55, 0x55, 0x55, 0x59, 0x39, 0x54, 0x54, 0x54, 0x59, 0x39, 0x55, 0x54, 0x54, 0x58, 0x00, 0x00, 0x45, 0x7C, 0x41, 0x00, 0x02, 0x45, 0x7D, 0x42, 0x00, 0x01, 0x45, 0x7C, 0x40, 0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut + 0xF0, 0x28, 0x25, 0x28, 0xF0, 0x7C, 0x54, 0x55, 0x45, 0x00, 0x20, 0x54, 0x54, 0x7C, 0x54, 0x7C, 0x0A, 0x09, 0x7F, 0x49, 0x32, 0x49, 0x49, 0x49, 0x32, 0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut + 0x32, 0x4A, 0x48, 0x48, 0x30, 0x3A, 0x41, 0x41, 0x21, 0x7A, 0x3A, 0x42, 0x40, 0x20, 0x78, 0x00, 0x9D, 0xA0, 0xA0, 0x7D, 0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut + 0x3D, 0x40, 0x40, 0x40, 0x3D, 0x3C, 0x24, 0xFF, 0x24, 0x24, 0x48, 0x7E, 0x49, 0x43, 0x66, 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, 0xFF, 0x09, 0x29, 0xF6, 0x20, 0xC0, 0x88, 0x7E, 0x09, 0x03, 0x20, 0x54, 0x54, 0x79, 0x41, 0x00, 0x00, 0x44, 0x7D, 0x41, 0x30, 0x48, 0x48, 0x4A, 0x32, 0x38, 0x40, 0x40, 0x22, 0x7A, 0x00, 0x7A, 0x0A, 0x0A, 0x72, 0x7D, 0x0D, 0x19, 0x31, 0x7D, 0x26, 0x29, 0x29, 0x2F, 0x28, 0x26, 0x29, 0x29, 0x29, 0x26, 0x30, 0x48, 0x4D, 0x40, 0x20, 0x38, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x38, 0x2F, 0x10, 0xC8, 0xAC, 0xBA, 0x2F, 0x10, 0x28, 0x34, 0xFA, 0x00, 0x00, 0x7B, 0x00, 0x00, 0x08, 0x14, 0x2A, 0x14, 0x22, 0x22, 0x14, 0x2A, 0x14, 0x08, 0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code + 0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block + 0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block + 0x00, 0x00, 0x00, 0xFF, 0x00, 0x10, 0x10, 0x10, 0xFF, 0x00, 0x14, 0x14, 0x14, 0xFF, 0x00, 0x10, 0x10, 0xFF, 0x00, 0xFF, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x14, 0x14, 0x14, 0xFC, 0x00, 0x14, 0x14, 0xF7, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x14, 0x14, 0xF4, 0x04, 0xFC, 0x14, 0x14, 0x17, 0x10, 0x1F, 0x10, 0x10, 0x1F, 0x10, 0x1F, 0x14, 0x14, 0x14, 0x1F, 0x00, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x10, 0x10, 0x10, 0x10, 0xF0, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0xFF, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x14, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0x00, 0x1F, 0x10, 0x17, 0x00, 0x00, 0xFC, 0x04, 0xF4, 0x14, 0x14, 0x17, 0x10, 0x17, 0x14, 0x14, 0xF4, 0x04, 0xF4, 0x00, 0x00, 0xFF, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0xF7, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x17, 0x14, 0x10, 0x10, 0x1F, 0x10, 0x1F, + 0x14, 0x14, 0x14, 0xF4, 0x14, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x00, 0x00, 0x1F, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x14, 0x00, 0x00, 0x00, 0xFC, 0x14, 0x00, 0x00, 0xF0, 0x10, 0xF0, 0x10, 0x10, 0xFF, 0x10, 0xFF, 0x14, 0x14, 0x14, 0xFF, 0x14, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x10, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x38, 0x44, 0x44, 0x38, 0x44, 0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta + 0x7E, 0x02, 0x02, 0x06, 0x06, 0x02, 0x7E, 0x02, 0x7E, 0x02, 0x63, 0x55, 0x49, 0x41, 0x63, 0x38, 0x44, 0x44, 0x3C, 0x04, 0x40, 0x7E, 0x20, 0x1E, 0x20, 0x06, 0x02, 0x7E, 0x02, 0x02, 0x99, 0xA5, 0xE7, 0xA5, 0x99, 0x1C, 0x2A, 0x49, 0x2A, 0x1C, 0x4C, 0x72, 0x01, 0x72, 0x4C, 0x30, 0x4A, 0x4D, 0x4D, 0x30, 0x30, 0x48, 0x78, 0x48, 0x30, 0xBC, 0x62, 0x5A, 0x46, 0x3D, 0x3E, 0x49, 0x49, 0x49, 0x00, 0x7E, 0x01, 0x01, 0x01, 0x7E, 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 0x44, 0x44, 0x5F, 0x44, 0x44, 0x40, 0x51, 0x4A, 0x44, 0x40, 0x40, 0x44, 0x4A, 0x51, 0x40, 0x00, 0x00, 0xFF, 0x01, 0x03, 0xE0, 0x80, 0xFF, 0x00, 0x00, 0x08, 0x08, 0x6B, 0x6B, 0x08, 0x36, 0x12, 0x36, 0x24, 0x36, 0x06, 0x0F, 0x09, 0x0F, 0x06, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00, 0x30, 0x40, 0xFF, 0x01, 0x01, 0x00, 0x1F, 0x01, 0x01, 0x1E, 0x00, 0x19, 0x1D, 0x17, 0x12, 0x00, 0x3C, 0x3C, 0x3C, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00 // #255 NBSP }; -#endif // FONT5X7_H +#endif // FONT5X7_H diff --git a/drivers/avr/hd44780.c b/drivers/avr/hd44780.c index 51414d8f91..f71069dece 100644 --- a/drivers/avr/hd44780.c +++ b/drivers/avr/hd44780.c @@ -3,7 +3,7 @@ Author: Peter Fleury <pfleury@gmx.ch> http://tinyurl.com/peterfleury License: GNU General Public License Version 3 File: $Id: lcd.c,v 1.15.2.2 2015/01/17 12:16:05 peter Exp $ - Software: AVR-GCC 3.3 + Software: AVR-GCC 3.3 Target: any AVR device, memory mapped mode only for AT90S4414/8515/Mega DESCRIPTION @@ -13,15 +13,15 @@ changed lcd_init(), added additional constants for lcd_command(), added 4-bit I/O mode, improved and optimized code. - Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in + Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in 4-bit IO port mode (LCD_IO_MODE=1). 8-bit IO port mode not supported. - + Memory mapped mode compatible with Kanda STK200, but supports also generation of R/W signal through A8 address line. USAGE See the C include lcd.h file for a description of each function - + *****************************************************************************/ #include <inttypes.h> #include <avr/io.h> @@ -29,55 +29,54 @@ #include <util/delay.h> #include "hd44780.h" -/* -** constants/macros +/* +** constants/macros */ -#define DDR(x) (*(&x - 1)) /* address of data direction register of port x */ +#define DDR(x) (*(&x - 1)) /* address of data direction register of port x */ #if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) - /* on ATmega64/128 PINF is on port 0x00 and not 0x60 */ - #define PIN(x) ( &PORTF==&(x) ? _SFR_IO8(0x00) : (*(&x - 2)) ) +/* on ATmega64/128 PINF is on port 0x00 and not 0x60 */ +# define PIN(x) (&PORTF == &(x) ? _SFR_IO8(0x00) : (*(&x - 2))) #else - #define PIN(x) (*(&x - 2)) /* address of input register of port x */ +# define PIN(x) (*(&x - 2)) /* address of input register of port x */ #endif - #if LCD_IO_MODE -#define lcd_e_delay() _delay_us(LCD_DELAY_ENABLE_PULSE) -#define lcd_e_high() LCD_E_PORT |= _BV(LCD_E_PIN); -#define lcd_e_low() LCD_E_PORT &= ~_BV(LCD_E_PIN); -#define lcd_e_toggle() toggle_e() -#define lcd_rw_high() LCD_RW_PORT |= _BV(LCD_RW_PIN) -#define lcd_rw_low() LCD_RW_PORT &= ~_BV(LCD_RW_PIN) -#define lcd_rs_high() LCD_RS_PORT |= _BV(LCD_RS_PIN) -#define lcd_rs_low() LCD_RS_PORT &= ~_BV(LCD_RS_PIN) +# define lcd_e_delay() _delay_us(LCD_DELAY_ENABLE_PULSE) +# define lcd_e_high() LCD_E_PORT |= _BV(LCD_E_PIN); +# define lcd_e_low() LCD_E_PORT &= ~_BV(LCD_E_PIN); +# define lcd_e_toggle() toggle_e() +# define lcd_rw_high() LCD_RW_PORT |= _BV(LCD_RW_PIN) +# define lcd_rw_low() LCD_RW_PORT &= ~_BV(LCD_RW_PIN) +# define lcd_rs_high() LCD_RS_PORT |= _BV(LCD_RS_PIN) +# define lcd_rs_low() LCD_RS_PORT &= ~_BV(LCD_RS_PIN) #endif #if LCD_IO_MODE -#if LCD_LINES==1 -#define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_1LINE +# if LCD_LINES == 1 +# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_1LINE +# else +# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_2LINES +# endif #else -#define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_2LINES -#endif -#else -#if LCD_LINES==1 -#define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_1LINE -#else -#define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_2LINES -#endif +# if LCD_LINES == 1 +# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_1LINE +# else +# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_2LINES +# endif #endif #if LCD_CONTROLLER_KS0073 -#if LCD_LINES==4 +# if LCD_LINES == 4 -#define KS0073_EXTENDED_FUNCTION_REGISTER_ON 0x2C /* |0|010|1100 4-bit mode, extension-bit RE = 1 */ -#define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28 /* |0|010|1000 4-bit mode, extension-bit RE = 0 */ -#define KS0073_4LINES_MODE 0x09 /* |0|000|1001 4 lines mode */ +# define KS0073_EXTENDED_FUNCTION_REGISTER_ON 0x2C /* |0|010|1100 4-bit mode, extension-bit RE = 1 */ +# define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28 /* |0|010|1000 4-bit mode, extension-bit RE = 0 */ +# define KS0073_4LINES_MODE 0x09 /* |0|000|1001 4 lines mode */ -#endif +# endif #endif -/* -** function prototypes +/* +** function prototypes */ #if LCD_IO_MODE static void toggle_e(void); @@ -87,93 +86,83 @@ static void toggle_e(void); ** local functions */ - -/************************************************************************* +/************************************************************************* delay for a minimum of <us> microseconds the number of loops is calculated at compile-time from MCU clock frequency *************************************************************************/ -#define delay(us) _delay_us(us) - +#define delay(us) _delay_us(us) #if LCD_IO_MODE /* toggle Enable Pin to initiate write */ -static void toggle_e(void) -{ +static void toggle_e(void) { lcd_e_high(); lcd_e_delay(); lcd_e_low(); } #endif - /************************************************************************* Low-level function to write byte to LCD controller Input: data byte to write to LCD - rs 1: write data + rs 1: write data 0: write instruction Returns: none *************************************************************************/ #if LCD_IO_MODE -static void lcd_write(uint8_t data,uint8_t rs) -{ - unsigned char dataBits ; - +static void lcd_write(uint8_t data, uint8_t rs) { + unsigned char dataBits; - if (rs) { /* write data (RS=1, RW=0) */ - lcd_rs_high(); - } else { /* write instruction (RS=0, RW=0) */ - lcd_rs_low(); + if (rs) { /* write data (RS=1, RW=0) */ + lcd_rs_high(); + } else { /* write instruction (RS=0, RW=0) */ + lcd_rs_low(); } - lcd_rw_low(); /* RW=0 write mode */ + lcd_rw_low(); /* RW=0 write mode */ - if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT ) - && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) ) - { + if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) { /* configure data pins as output */ DDR(LCD_DATA0_PORT) |= 0x0F; /* output high nibble first */ - dataBits = LCD_DATA0_PORT & 0xF0; - LCD_DATA0_PORT = dataBits |((data>>4)&0x0F); + dataBits = LCD_DATA0_PORT & 0xF0; + LCD_DATA0_PORT = dataBits | ((data >> 4) & 0x0F); lcd_e_toggle(); /* output low nibble */ - LCD_DATA0_PORT = dataBits | (data&0x0F); + LCD_DATA0_PORT = dataBits | (data & 0x0F); lcd_e_toggle(); /* all data pins high (inactive) */ LCD_DATA0_PORT = dataBits | 0x0F; - } - else - { + } else { /* configure data pins as output */ DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN); DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN); DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN); DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN); - + /* output high nibble first */ LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN); LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN); LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN); LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); - if(data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); - if(data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); - if(data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); - if(data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); + if (data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); + if (data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); + if (data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); + if (data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); lcd_e_toggle(); - + /* output low nibble */ LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN); LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN); LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN); LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); - if(data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); - if(data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); - if(data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); - if(data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); - lcd_e_toggle(); - + if (data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); + if (data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); + if (data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); + if (data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); + lcd_e_toggle(); + /* all data pins high (inactive) */ LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); @@ -182,85 +171,81 @@ static void lcd_write(uint8_t data,uint8_t rs) } } #else -#define lcd_write(d,rs) if (rs) *(volatile uint8_t*)(LCD_IO_DATA) = d; else *(volatile uint8_t*)(LCD_IO_FUNCTION) = d; +# define lcd_write(d, rs) \ + if (rs) \ + *(volatile uint8_t *)(LCD_IO_DATA) = d; \ + else \ + *(volatile uint8_t *)(LCD_IO_FUNCTION) = d; /* rs==0 -> write instruction to LCD_IO_FUNCTION */ /* rs==1 -> write data to LCD_IO_DATA */ #endif - /************************************************************************* Low-level function to read byte from LCD controller -Input: rs 1: read data +Input: rs 1: read data 0: read busy flag / address counter Returns: byte read from LCD controller *************************************************************************/ #if LCD_IO_MODE -static uint8_t lcd_read(uint8_t rs) -{ +static uint8_t lcd_read(uint8_t rs) { uint8_t data; - - + if (rs) - lcd_rs_high(); /* RS=1: read data */ + lcd_rs_high(); /* RS=1: read data */ else - lcd_rs_low(); /* RS=0: read busy flag */ - lcd_rw_high(); /* RW=1 read mode */ - - if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT ) - && ( LCD_DATA0_PIN == 0 )&& (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) ) - { - DDR(LCD_DATA0_PORT) &= 0xF0; /* configure data pins as input */ - + lcd_rs_low(); /* RS=0: read busy flag */ + lcd_rw_high(); /* RW=1 read mode */ + + if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) { + DDR(LCD_DATA0_PORT) &= 0xF0; /* configure data pins as input */ + lcd_e_high(); - lcd_e_delay(); - data = PIN(LCD_DATA0_PORT) << 4; /* read high nibble first */ + lcd_e_delay(); + data = PIN(LCD_DATA0_PORT) << 4; /* read high nibble first */ lcd_e_low(); - - lcd_e_delay(); /* Enable 500ns low */ - + + lcd_e_delay(); /* Enable 500ns low */ + lcd_e_high(); lcd_e_delay(); - data |= PIN(LCD_DATA0_PORT)&0x0F; /* read low nibble */ + data |= PIN(LCD_DATA0_PORT) & 0x0F; /* read low nibble */ lcd_e_low(); - } - else - { + } else { /* configure data pins as input */ DDR(LCD_DATA0_PORT) &= ~_BV(LCD_DATA0_PIN); DDR(LCD_DATA1_PORT) &= ~_BV(LCD_DATA1_PIN); DDR(LCD_DATA2_PORT) &= ~_BV(LCD_DATA2_PIN); DDR(LCD_DATA3_PORT) &= ~_BV(LCD_DATA3_PIN); - + /* read high nibble first */ lcd_e_high(); - lcd_e_delay(); + lcd_e_delay(); data = 0; - if ( PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN) ) data |= 0x10; - if ( PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN) ) data |= 0x20; - if ( PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN) ) data |= 0x40; - if ( PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN) ) data |= 0x80; + if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x10; + if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x20; + if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x40; + if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x80; lcd_e_low(); - lcd_e_delay(); /* Enable 500ns low */ - - /* read low nibble */ + lcd_e_delay(); /* Enable 500ns low */ + + /* read low nibble */ lcd_e_high(); lcd_e_delay(); - if ( PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN) ) data |= 0x01; - if ( PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN) ) data |= 0x02; - if ( PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN) ) data |= 0x04; - if ( PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN) ) data |= 0x08; + if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x01; + if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x02; + if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x04; + if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x08; lcd_e_low(); } return data; } #else -#define lcd_read(rs) (rs) ? *(volatile uint8_t*)(LCD_IO_DATA+LCD_IO_READ) : *(volatile uint8_t*)(LCD_IO_FUNCTION+LCD_IO_READ) +# define lcd_read(rs) (rs) ? *(volatile uint8_t *)(LCD_IO_DATA + LCD_IO_READ) : *(volatile uint8_t *)(LCD_IO_FUNCTION + LCD_IO_READ) /* rs==0 -> read instruction from LCD_IO_FUNCTION */ /* rs==1 -> read data from LCD_IO_DATA */ #endif - /************************************************************************* loops while lcd is busy, returns address counter *************************************************************************/ @@ -268,65 +253,62 @@ static uint8_t lcd_waitbusy(void) { register uint8_t c; - + /* wait until busy flag is cleared */ - while ( (c=lcd_read(0)) & (1<<LCD_BUSY)) {} - + while ((c = lcd_read(0)) & (1 << LCD_BUSY)) { + } + /* the address counter is updated 4us after the busy flag is cleared */ delay(LCD_DELAY_BUSY_FLAG); /* now read the address counter */ return (lcd_read(0)); // return address counter - -}/* lcd_waitbusy */ +} /* lcd_waitbusy */ /************************************************************************* -Move cursor to the start of next line or to the first line if the cursor +Move cursor to the start of next line or to the first line if the cursor is already on the last line. *************************************************************************/ -static inline void lcd_newline(uint8_t pos) -{ +static inline void lcd_newline(uint8_t pos) { register uint8_t addressCounter; - -#if LCD_LINES==1 +#if LCD_LINES == 1 addressCounter = 0; #endif -#if LCD_LINES==2 - if ( pos < (LCD_START_LINE2) ) +#if LCD_LINES == 2 + if (pos < (LCD_START_LINE2)) addressCounter = LCD_START_LINE2; else addressCounter = LCD_START_LINE1; #endif -#if LCD_LINES==4 -#if KS0073_4LINES_MODE - if ( pos < LCD_START_LINE2 ) +#if LCD_LINES == 4 +# if KS0073_4LINES_MODE + if (pos < LCD_START_LINE2) addressCounter = LCD_START_LINE2; - else if ( (pos >= LCD_START_LINE2) && (pos < LCD_START_LINE3) ) + else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE3)) addressCounter = LCD_START_LINE3; - else if ( (pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4) ) + else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4)) addressCounter = LCD_START_LINE4; - else + else addressCounter = LCD_START_LINE1; -#else - if ( pos < LCD_START_LINE3 ) +# else + if (pos < LCD_START_LINE3) addressCounter = LCD_START_LINE2; - else if ( (pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4) ) + else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4)) addressCounter = LCD_START_LINE3; - else if ( (pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2) ) + else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2)) addressCounter = LCD_START_LINE4; - else + else addressCounter = LCD_START_LINE1; +# endif #endif -#endif - lcd_command((1<<LCD_DDRAM)+addressCounter); - -}/* lcd_newline */ + lcd_command((1 << LCD_DDRAM) + addressCounter); +} /* lcd_newline */ /* -** PUBLIC FUNCTIONS +** PUBLIC FUNCTIONS */ /************************************************************************* @@ -334,132 +316,107 @@ Send LCD controller instruction command Input: instruction to send to LCD controller, see HD44780 data sheet Returns: none *************************************************************************/ -void lcd_command(uint8_t cmd) -{ +void lcd_command(uint8_t cmd) { lcd_waitbusy(); - lcd_write(cmd,0); + lcd_write(cmd, 0); } - /************************************************************************* -Send data byte to LCD controller +Send data byte to LCD controller Input: data to send to LCD controller, see HD44780 data sheet Returns: none *************************************************************************/ -void lcd_data(uint8_t data) -{ +void lcd_data(uint8_t data) { lcd_waitbusy(); - lcd_write(data,1); + lcd_write(data, 1); } - - /************************************************************************* Set cursor to specified position Input: x horizontal position (0: left most position) y vertical position (0: first line) Returns: none *************************************************************************/ -void lcd_gotoxy(uint8_t x, uint8_t y) -{ -#if LCD_LINES==1 - lcd_command((1<<LCD_DDRAM)+LCD_START_LINE1+x); +void lcd_gotoxy(uint8_t x, uint8_t y) { +#if LCD_LINES == 1 + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x); #endif -#if LCD_LINES==2 - if ( y==0 ) - lcd_command((1<<LCD_DDRAM)+LCD_START_LINE1+x); +#if LCD_LINES == 2 + if (y == 0) + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x); else - lcd_command((1<<LCD_DDRAM)+LCD_START_LINE2+x); + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x); #endif -#if LCD_LINES==4 - if ( y==0 ) - lcd_command((1<<LCD_DDRAM)+LCD_START_LINE1+x); - else if ( y==1) - lcd_command((1<<LCD_DDRAM)+LCD_START_LINE2+x); - else if ( y==2) - lcd_command((1<<LCD_DDRAM)+LCD_START_LINE3+x); +#if LCD_LINES == 4 + if (y == 0) + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x); + else if (y == 1) + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x); + else if (y == 2) + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE3 + x); else /* y==3 */ - lcd_command((1<<LCD_DDRAM)+LCD_START_LINE4+x); + lcd_command((1 << LCD_DDRAM) + LCD_START_LINE4 + x); #endif -}/* lcd_gotoxy */ - +} /* lcd_gotoxy */ /************************************************************************* *************************************************************************/ -int lcd_getxy(void) -{ - return lcd_waitbusy(); -} - +int lcd_getxy(void) { return lcd_waitbusy(); } /************************************************************************* Clear display and set cursor to home position *************************************************************************/ -void lcd_clrscr(void) -{ - lcd_command(1<<LCD_CLR); -} - +void lcd_clrscr(void) { lcd_command(1 << LCD_CLR); } /************************************************************************* Set cursor to home position *************************************************************************/ -void lcd_home(void) -{ - lcd_command(1<<LCD_HOME); -} - +void lcd_home(void) { lcd_command(1 << LCD_HOME); } /************************************************************************* -Display character at current cursor position -Input: character to be displayed +Display character at current cursor position +Input: character to be displayed Returns: none *************************************************************************/ -void lcd_putc(char c) -{ +void lcd_putc(char c) { uint8_t pos; - - pos = lcd_waitbusy(); // read busy-flag and address counter - if (c=='\n') - { + pos = lcd_waitbusy(); // read busy-flag and address counter + if (c == '\n') { lcd_newline(pos); - } - else - { -#if LCD_WRAP_LINES==1 -#if LCD_LINES==1 - if ( pos == LCD_START_LINE1+LCD_DISP_LENGTH ) { - lcd_write((1<<LCD_DDRAM)+LCD_START_LINE1,0); + } else { +#if LCD_WRAP_LINES == 1 +# if LCD_LINES == 1 + if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0); } -#elif LCD_LINES==2 - if ( pos == LCD_START_LINE1+LCD_DISP_LENGTH ) { - lcd_write((1<<LCD_DDRAM)+LCD_START_LINE2,0); - }else if ( pos == LCD_START_LINE2+LCD_DISP_LENGTH ){ - lcd_write((1<<LCD_DDRAM)+LCD_START_LINE1,0); +# elif LCD_LINES == 2 + if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0); + } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0); } -#elif LCD_LINES==4 - if ( pos == LCD_START_LINE1+LCD_DISP_LENGTH ) { - lcd_write((1<<LCD_DDRAM)+LCD_START_LINE2,0); - }else if ( pos == LCD_START_LINE2+LCD_DISP_LENGTH ) { - lcd_write((1<<LCD_DDRAM)+LCD_START_LINE3,0); - }else if ( pos == LCD_START_LINE3+LCD_DISP_LENGTH ) { - lcd_write((1<<LCD_DDRAM)+LCD_START_LINE4,0); - }else if ( pos == LCD_START_LINE4+LCD_DISP_LENGTH ) { - lcd_write((1<<LCD_DDRAM)+LCD_START_LINE1,0); +# elif LCD_LINES == 4 + if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0); + } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE3, 0); + } else if (pos == LCD_START_LINE3 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE4, 0); + } else if (pos == LCD_START_LINE4 + LCD_DISP_LENGTH) { + lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0); } -#endif +# endif lcd_waitbusy(); #endif lcd_write(c, 1); } -}/* lcd_putc */ - +} /* lcd_putc */ /************************************************************************* -Display string without auto linefeed +Display string without auto linefeed Input: string to be displayed Returns: none *************************************************************************/ @@ -468,16 +425,15 @@ void lcd_puts(const char *s) { register char c; - while ( (c = *s++) ) { + while ((c = *s++)) { lcd_putc(c); } -}/* lcd_puts */ - +} /* lcd_puts */ /************************************************************************* -Display string from program memory without auto linefeed -Input: string from program memory be be displayed +Display string from program memory without auto linefeed +Input: string from program memory be be displayed Returns: none *************************************************************************/ void lcd_puts_p(const char *progmem_s) @@ -485,108 +441,96 @@ void lcd_puts_p(const char *progmem_s) { register char c; - while ( (c = pgm_read_byte(progmem_s++)) ) { + while ((c = pgm_read_byte(progmem_s++))) { lcd_putc(c); } -}/* lcd_puts_p */ - +} /* lcd_puts_p */ /************************************************************************* -Initialize display and select type of cursor +Initialize display and select type of cursor Input: dispAttr LCD_DISP_OFF display off LCD_DISP_ON display on, cursor off LCD_DISP_ON_CURSOR display on, cursor on LCD_DISP_CURSOR_BLINK display on, cursor on flashing Returns: none *************************************************************************/ -void lcd_init(uint8_t dispAttr) -{ +void lcd_init(uint8_t dispAttr) { #if LCD_IO_MODE /* * Initialize LCD to 4 bit I/O mode */ - - if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT ) - && ( &LCD_RS_PORT == &LCD_DATA0_PORT) && ( &LCD_RW_PORT == &LCD_DATA0_PORT) && (&LCD_E_PORT == &LCD_DATA0_PORT) - && (LCD_DATA0_PIN == 0 ) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) - && (LCD_RS_PIN == 4 ) && (LCD_RW_PIN == 5) && (LCD_E_PIN == 6 ) ) - { + + if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (&LCD_RS_PORT == &LCD_DATA0_PORT) && (&LCD_RW_PORT == &LCD_DATA0_PORT) && (&LCD_E_PORT == &LCD_DATA0_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) && (LCD_RS_PIN == 4) && (LCD_RW_PIN == 5) && (LCD_E_PIN == 6)) { /* configure all port bits as output (all LCD lines on same port) */ DDR(LCD_DATA0_PORT) |= 0x7F; - } - else if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT ) - && (LCD_DATA0_PIN == 0 ) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) ) - { + } else if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) { /* configure all port bits as output (all LCD data lines on same port, but control lines on different ports) */ DDR(LCD_DATA0_PORT) |= 0x0F; - DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN); - DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN); - DDR(LCD_E_PORT) |= _BV(LCD_E_PIN); - } - else - { + DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN); + DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN); + DDR(LCD_E_PORT) |= _BV(LCD_E_PIN); + } else { /* configure all port bits as output (LCD data and control lines on different ports */ - DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN); - DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN); - DDR(LCD_E_PORT) |= _BV(LCD_E_PIN); + DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN); + DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN); + DDR(LCD_E_PORT) |= _BV(LCD_E_PIN); DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN); DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN); DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN); DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN); } - delay(LCD_DELAY_BOOTUP); /* wait 16ms or more after power-on */ - + delay(LCD_DELAY_BOOTUP); /* wait 16ms or more after power-on */ + /* initial write to lcd is 8bit */ - LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); // LCD_FUNCTION>>4; - LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); // LCD_FUNCTION_8BIT>>4; + LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); // LCD_FUNCTION>>4; + LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); // LCD_FUNCTION_8BIT>>4; + lcd_e_toggle(); + delay(LCD_DELAY_INIT); /* delay, busy flag can't be checked here */ + + /* repeat last command */ lcd_e_toggle(); - delay(LCD_DELAY_INIT); /* delay, busy flag can't be checked here */ - - /* repeat last command */ - lcd_e_toggle(); - delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */ - + delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */ + /* repeat last command a third time */ - lcd_e_toggle(); - delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */ + lcd_e_toggle(); + delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */ /* now configure for 4bit mode */ - LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); // LCD_FUNCTION_4BIT_1LINE>>4 + LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); // LCD_FUNCTION_4BIT_1LINE>>4 lcd_e_toggle(); - delay(LCD_DELAY_INIT_4BIT); /* some displays need this additional delay */ - - /* from now the LCD only accepts 4 bit I/O, we can use lcd_command() */ + delay(LCD_DELAY_INIT_4BIT); /* some displays need this additional delay */ + + /* from now the LCD only accepts 4 bit I/O, we can use lcd_command() */ #else /* * Initialize LCD to 8 bit memory mapped mode */ - - /* enable external SRAM (memory mapped lcd) and one wait state */ + + /* enable external SRAM (memory mapped lcd) and one wait state */ MCUCR = _BV(SRE) | _BV(SRW); /* reset LCD */ - delay(LCD_DELAY_BOOTUP); /* wait 16ms after power-on */ - lcd_write(LCD_FUNCTION_8BIT_1LINE,0); /* function set: 8bit interface */ - delay(LCD_DELAY_INIT); /* wait 5ms */ - lcd_write(LCD_FUNCTION_8BIT_1LINE,0); /* function set: 8bit interface */ - delay(LCD_DELAY_INIT_REP); /* wait 64us */ - lcd_write(LCD_FUNCTION_8BIT_1LINE,0); /* function set: 8bit interface */ - delay(LCD_DELAY_INIT_REP); /* wait 64us */ + delay(LCD_DELAY_BOOTUP); /* wait 16ms after power-on */ + lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */ + delay(LCD_DELAY_INIT); /* wait 5ms */ + lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */ + delay(LCD_DELAY_INIT_REP); /* wait 64us */ + lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */ + delay(LCD_DELAY_INIT_REP); /* wait 64us */ #endif #if KS0073_4LINES_MODE /* Display with KS0073 controller requires special commands for enabling 4 line mode */ - lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_ON); - lcd_command(KS0073_4LINES_MODE); - lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_OFF); + lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_ON); + lcd_command(KS0073_4LINES_MODE); + lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_OFF); #else - lcd_command(LCD_FUNCTION_DEFAULT); /* function set: display lines */ + lcd_command(LCD_FUNCTION_DEFAULT); /* function set: display lines */ #endif - lcd_command(LCD_DISP_OFF); /* display off */ - lcd_clrscr(); /* display clear */ - lcd_command(LCD_MODE_DEFAULT); /* set entry mode */ - lcd_command(dispAttr); /* display/cursor control */ - -}/* lcd_init */ + lcd_command(LCD_DISP_OFF); /* display off */ + lcd_clrscr(); /* display clear */ + lcd_command(LCD_MODE_DEFAULT); /* set entry mode */ + lcd_command(dispAttr); /* display/cursor control */ +} /* lcd_init */ diff --git a/drivers/avr/hd44780.h b/drivers/avr/hd44780.h index 7421c8131f..e60817e989 100644 --- a/drivers/avr/hd44780.h +++ b/drivers/avr/hd44780.h @@ -6,7 +6,7 @@ License: GNU General Public License Version 3 File: $Id: lcd.h,v 1.14.2.4 2015/01/20 17:16:07 peter Exp $ Software: AVR-GCC 4.x - Hardware: any AVR device, memory mapped mode only for AVR with + Hardware: any AVR device, memory mapped mode only for AVR with memory mapped interface (AT90S8515/ATmega8515/ATmega128) ***************************************************************************/ @@ -15,333 +15,315 @@ Collection of libraries for AVR-GCC @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3 - + @file @defgroup pfleury_lcd LCD library <lcd.h> @code #include <lcd.h> @endcode - + @brief Basic routines for interfacing a HD44780U-based character LCD display - LCD character displays can be found in many devices, like espresso machines, laser printers. - The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays. - + LCD character displays can be found in many devices, like espresso machines, laser printers. + The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays. + This library allows easy interfacing with a HD44780 compatible display and can be - operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in + operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in 4-bit IO port mode (LCD_IO_MODE defined as 1). 8-bit IO port mode is not supported. Memory mapped mode is compatible with old Kanda STK200 starter kit, but also supports generation of R/W signal through A8 address line. @see The chapter <a href=" http://homepage.hispeed.ch/peterfleury/avr-lcd44780.html" target="_blank">Interfacing a HD44780 Based LCD to an AVR</a> - on my home page, which shows example circuits how to connect an LCD to an AVR controller. + on my home page, which shows example circuits how to connect an LCD to an AVR controller. @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury - + @version 2.0 - + @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3 - + */ #include <inttypes.h> #include <avr/pgmspace.h> #if (__GNUC__ * 100 + __GNUC_MINOR__) < 405 -#error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !" +# error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !" #endif - /**@{*/ /* - * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file + * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file * by adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h */ #ifdef _LCD_DEFINITIONS_FILE -#include "lcd_definitions.h" +# include "lcd_definitions.h" #endif - /** * @name Definition for LCD controller type * Use 0 for HD44780 controller, change to 1 for displays with KS0073 controller. */ -#ifndef LCD_CONTROLLER_KS0073 -#define LCD_CONTROLLER_KS0073 0 /**< Use 0 for HD44780 controller, 1 for KS0073 controller */ +#ifndef LCD_CONTROLLER_KS0073 +# define LCD_CONTROLLER_KS0073 0 /**< Use 0 for HD44780 controller, 1 for KS0073 controller */ #endif -/** - * @name Definitions for Display Size +/** + * @name Definitions for Display Size * Change these definitions to adapt setting to your display * - * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by + * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by * adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile. * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h * */ #ifndef LCD_LINES -#define LCD_LINES 2 /**< number of visible lines of the display */ +# define LCD_LINES 2 /**< number of visible lines of the display */ #endif #ifndef LCD_DISP_LENGTH -#define LCD_DISP_LENGTH 16 /**< visibles characters per line of the display */ +# define LCD_DISP_LENGTH 16 /**< visibles characters per line of the display */ #endif #ifndef LCD_LINE_LENGTH -#define LCD_LINE_LENGTH 0x40 /**< internal line length of the display */ +# define LCD_LINE_LENGTH 0x40 /**< internal line length of the display */ #endif #ifndef LCD_START_LINE1 -#define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */ +# define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */ #endif #ifndef LCD_START_LINE2 -#define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */ +# define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */ #endif #ifndef LCD_START_LINE3 -#define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */ +# define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */ #endif #ifndef LCD_START_LINE4 -#define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */ +# define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */ #endif #ifndef LCD_WRAP_LINES -#define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */ +# define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */ #endif - /** * @name Definitions for 4-bit IO mode * - * The four LCD data lines and the three control lines RS, RW, E can be on the - * same port or on different ports. + * The four LCD data lines and the three control lines RS, RW, E can be on the + * same port or on different ports. * Change LCD_RS_PORT, LCD_RW_PORT, LCD_E_PORT if you want the control lines on - * different ports. + * different ports. * * Normally the four data lines should be mapped to bit 0..3 on one port, but it * is possible to connect these data lines in different order or even on different * ports by adapting the LCD_DATAx_PORT and LCD_DATAx_PIN definitions. * - * Adjust these definitions to your target.\n - * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by + * Adjust these definitions to your target.\n + * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile. * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h - * + * */ -#define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */ +#define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */ #if LCD_IO_MODE -#ifndef LCD_PORT -#define LCD_PORT PORTA /**< port for the LCD lines */ -#endif -#ifndef LCD_DATA0_PORT -#define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */ -#endif -#ifndef LCD_DATA1_PORT -#define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */ -#endif -#ifndef LCD_DATA2_PORT -#define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */ -#endif -#ifndef LCD_DATA3_PORT -#define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */ -#endif -#ifndef LCD_DATA0_PIN -#define LCD_DATA0_PIN 4 /**< pin for 4bit data bit 0 */ -#endif -#ifndef LCD_DATA1_PIN -#define LCD_DATA1_PIN 5 /**< pin for 4bit data bit 1 */ -#endif -#ifndef LCD_DATA2_PIN -#define LCD_DATA2_PIN 6 /**< pin for 4bit data bit 2 */ -#endif -#ifndef LCD_DATA3_PIN -#define LCD_DATA3_PIN 7 /**< pin for 4bit data bit 3 */ -#endif -#ifndef LCD_RS_PORT -#define LCD_RS_PORT LCD_PORT /**< port for RS line */ -#endif -#ifndef LCD_RS_PIN -#define LCD_RS_PIN 3 /**< pin for RS line */ -#endif -#ifndef LCD_RW_PORT -#define LCD_RW_PORT LCD_PORT /**< port for RW line */ -#endif -#ifndef LCD_RW_PIN -#define LCD_RW_PIN 2 /**< pin for RW line */ -#endif -#ifndef LCD_E_PORT -#define LCD_E_PORT LCD_PORT /**< port for Enable line */ -#endif -#ifndef LCD_E_PIN -#define LCD_E_PIN 1 /**< pin for Enable line */ -#endif - -#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || \ - defined(__AVR_ATmega8515__)|| defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || \ - defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__) +# ifndef LCD_PORT +# define LCD_PORT PORTA /**< port for the LCD lines */ +# endif +# ifndef LCD_DATA0_PORT +# define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */ +# endif +# ifndef LCD_DATA1_PORT +# define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */ +# endif +# ifndef LCD_DATA2_PORT +# define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */ +# endif +# ifndef LCD_DATA3_PORT +# define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */ +# endif +# ifndef LCD_DATA0_PIN +# define LCD_DATA0_PIN 4 /**< pin for 4bit data bit 0 */ +# endif +# ifndef LCD_DATA1_PIN +# define LCD_DATA1_PIN 5 /**< pin for 4bit data bit 1 */ +# endif +# ifndef LCD_DATA2_PIN +# define LCD_DATA2_PIN 6 /**< pin for 4bit data bit 2 */ +# endif +# ifndef LCD_DATA3_PIN +# define LCD_DATA3_PIN 7 /**< pin for 4bit data bit 3 */ +# endif +# ifndef LCD_RS_PORT +# define LCD_RS_PORT LCD_PORT /**< port for RS line */ +# endif +# ifndef LCD_RS_PIN +# define LCD_RS_PIN 3 /**< pin for RS line */ +# endif +# ifndef LCD_RW_PORT +# define LCD_RW_PORT LCD_PORT /**< port for RW line */ +# endif +# ifndef LCD_RW_PIN +# define LCD_RW_PIN 2 /**< pin for RW line */ +# endif +# ifndef LCD_E_PORT +# define LCD_E_PORT LCD_PORT /**< port for Enable line */ +# endif +# ifndef LCD_E_PIN +# define LCD_E_PIN 1 /**< pin for Enable line */ +# endif + +#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__) /* * memory mapped mode is only supported when the device has an external data memory interface */ -#define LCD_IO_DATA 0xC000 /* A15=E=1, A14=RS=1 */ -#define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0 */ -#define LCD_IO_READ 0x0100 /* A8 =R/W=1 (R/W: 1=Read, 0=Write */ +# define LCD_IO_DATA 0xC000 /* A15=E=1, A14=RS=1 */ +# define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0 */ +# define LCD_IO_READ 0x0100 /* A8 =R/W=1 (R/W: 1=Read, 0=Write */ #else -#error "external data memory interface not available for this device, use 4-bit IO port mode" +# error "external data memory interface not available for this device, use 4-bit IO port mode" #endif - /** * @name Definitions of delays * Used to calculate delay timers. * Adapt the F_CPU define in the Makefile to the clock frequency in Hz of your target * - * These delay times can be adjusted, if some displays require different delays.\n - * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by + * These delay times can be adjusted, if some displays require different delays.\n + * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile. * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h */ #ifndef LCD_DELAY_BOOTUP -#define LCD_DELAY_BOOTUP 16000 /**< delay in micro seconds after power-on */ +# define LCD_DELAY_BOOTUP 16000 /**< delay in micro seconds after power-on */ #endif #ifndef LCD_DELAY_INIT -#define LCD_DELAY_INIT 5000 /**< delay in micro seconds after initialization command sent */ +# define LCD_DELAY_INIT 5000 /**< delay in micro seconds after initialization command sent */ #endif #ifndef LCD_DELAY_INIT_REP -#define LCD_DELAY_INIT_REP 64 /**< delay in micro seconds after initialization command repeated */ +# define LCD_DELAY_INIT_REP 64 /**< delay in micro seconds after initialization command repeated */ #endif #ifndef LCD_DELAY_INIT_4BIT -#define LCD_DELAY_INIT_4BIT 64 /**< delay in micro seconds after setting 4-bit mode */ +# define LCD_DELAY_INIT_4BIT 64 /**< delay in micro seconds after setting 4-bit mode */ #endif #ifndef LCD_DELAY_BUSY_FLAG -#define LCD_DELAY_BUSY_FLAG 4 /**< time in micro seconds the address counter is updated after busy flag is cleared */ +# define LCD_DELAY_BUSY_FLAG 4 /**< time in micro seconds the address counter is updated after busy flag is cleared */ #endif #ifndef LCD_DELAY_ENABLE_PULSE -#define LCD_DELAY_ENABLE_PULSE 1 /**< enable signal pulse width in micro seconds */ +# define LCD_DELAY_ENABLE_PULSE 1 /**< enable signal pulse width in micro seconds */ #endif - /** * @name Definitions for LCD command instructions - * The constants define the various LCD controller instructions which can be passed to the + * The constants define the various LCD controller instructions which can be passed to the * function lcd_command(), see HD44780 data sheet for a complete description. */ /* instruction register bit positions, see HD44780U data sheet */ -#define LCD_CLR 0 /* DB0: clear display */ -#define LCD_HOME 1 /* DB1: return to home position */ -#define LCD_ENTRY_MODE 2 /* DB2: set entry mode */ -#define LCD_ENTRY_INC 1 /* DB1: 1=increment, 0=decrement */ -#define LCD_ENTRY_SHIFT 0 /* DB2: 1=display shift on */ -#define LCD_ON 3 /* DB3: turn lcd/cursor on */ -#define LCD_ON_DISPLAY 2 /* DB2: turn display on */ -#define LCD_ON_CURSOR 1 /* DB1: turn cursor on */ -#define LCD_ON_BLINK 0 /* DB0: blinking cursor ? */ -#define LCD_MOVE 4 /* DB4: move cursor/display */ -#define LCD_MOVE_DISP 3 /* DB3: move display (0-> cursor) ? */ -#define LCD_MOVE_RIGHT 2 /* DB2: move right (0-> left) ? */ -#define LCD_FUNCTION 5 /* DB5: function set */ -#define LCD_FUNCTION_8BIT 4 /* DB4: set 8BIT mode (0->4BIT mode) */ -#define LCD_FUNCTION_2LINES 3 /* DB3: two lines (0->one line) */ -#define LCD_FUNCTION_10DOTS 2 /* DB2: 5x10 font (0->5x7 font) */ -#define LCD_CGRAM 6 /* DB6: set CG RAM address */ -#define LCD_DDRAM 7 /* DB7: set DD RAM address */ -#define LCD_BUSY 7 /* DB7: LCD is busy */ +#define LCD_CLR 0 /* DB0: clear display */ +#define LCD_HOME 1 /* DB1: return to home position */ +#define LCD_ENTRY_MODE 2 /* DB2: set entry mode */ +#define LCD_ENTRY_INC 1 /* DB1: 1=increment, 0=decrement */ +#define LCD_ENTRY_SHIFT 0 /* DB2: 1=display shift on */ +#define LCD_ON 3 /* DB3: turn lcd/cursor on */ +#define LCD_ON_DISPLAY 2 /* DB2: turn display on */ +#define LCD_ON_CURSOR 1 /* DB1: turn cursor on */ +#define LCD_ON_BLINK 0 /* DB0: blinking cursor ? */ +#define LCD_MOVE 4 /* DB4: move cursor/display */ +#define LCD_MOVE_DISP 3 /* DB3: move display (0-> cursor) ? */ +#define LCD_MOVE_RIGHT 2 /* DB2: move right (0-> left) ? */ +#define LCD_FUNCTION 5 /* DB5: function set */ +#define LCD_FUNCTION_8BIT 4 /* DB4: set 8BIT mode (0->4BIT mode) */ +#define LCD_FUNCTION_2LINES 3 /* DB3: two lines (0->one line) */ +#define LCD_FUNCTION_10DOTS 2 /* DB2: 5x10 font (0->5x7 font) */ +#define LCD_CGRAM 6 /* DB6: set CG RAM address */ +#define LCD_DDRAM 7 /* DB7: set DD RAM address */ +#define LCD_BUSY 7 /* DB7: LCD is busy */ /* set entry mode: display shift on/off, dec/inc cursor move direction */ -#define LCD_ENTRY_DEC 0x04 /* display shift off, dec cursor move dir */ -#define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on, dec cursor move dir */ -#define LCD_ENTRY_INC_ 0x06 /* display shift off, inc cursor move dir */ -#define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on, inc cursor move dir */ +#define LCD_ENTRY_DEC 0x04 /* display shift off, dec cursor move dir */ +#define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on, dec cursor move dir */ +#define LCD_ENTRY_INC_ 0x06 /* display shift off, inc cursor move dir */ +#define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on, inc cursor move dir */ /* display on/off, cursor on/off, blinking char at cursor position */ -#define LCD_DISP_OFF 0x08 /* display off */ -#define LCD_DISP_ON 0x0C /* display on, cursor off */ -#define LCD_DISP_ON_BLINK 0x0D /* display on, cursor off, blink char */ -#define LCD_DISP_ON_CURSOR 0x0E /* display on, cursor on */ -#define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char */ +#define LCD_DISP_OFF 0x08 /* display off */ +#define LCD_DISP_ON 0x0C /* display on, cursor off */ +#define LCD_DISP_ON_BLINK 0x0D /* display on, cursor off, blink char */ +#define LCD_DISP_ON_CURSOR 0x0E /* display on, cursor on */ +#define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char */ /* move cursor/shift display */ -#define LCD_MOVE_CURSOR_LEFT 0x10 /* move cursor left (decrement) */ -#define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment) */ -#define LCD_MOVE_DISP_LEFT 0x18 /* shift display left */ -#define LCD_MOVE_DISP_RIGHT 0x1C /* shift display right */ +#define LCD_MOVE_CURSOR_LEFT 0x10 /* move cursor left (decrement) */ +#define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment) */ +#define LCD_MOVE_DISP_LEFT 0x18 /* shift display left */ +#define LCD_MOVE_DISP_RIGHT 0x1C /* shift display right */ /* function set: set interface data length and number of display lines */ -#define LCD_FUNCTION_4BIT_1LINE 0x20 /* 4-bit interface, single line, 5x7 dots */ -#define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line, 5x7 dots */ -#define LCD_FUNCTION_8BIT_1LINE 0x30 /* 8-bit interface, single line, 5x7 dots */ -#define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line, 5x7 dots */ +#define LCD_FUNCTION_4BIT_1LINE 0x20 /* 4-bit interface, single line, 5x7 dots */ +#define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line, 5x7 dots */ +#define LCD_FUNCTION_8BIT_1LINE 0x30 /* 8-bit interface, single line, 5x7 dots */ +#define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line, 5x7 dots */ +#define LCD_MODE_DEFAULT ((1 << LCD_ENTRY_MODE) | (1 << LCD_ENTRY_INC)) -#define LCD_MODE_DEFAULT ((1<<LCD_ENTRY_MODE) | (1<<LCD_ENTRY_INC) ) - - - -/** +/** * @name Functions */ - /** @brief Initialize display and select type of cursor @param dispAttr \b LCD_DISP_OFF display off\n \b LCD_DISP_ON display on, cursor off\n \b LCD_DISP_ON_CURSOR display on, cursor on\n - \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing + \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing @return none */ extern void lcd_init(uint8_t dispAttr); - /** @brief Clear display and set cursor to home position @return none */ extern void lcd_clrscr(void); - /** @brief Set cursor to home position @return none */ extern void lcd_home(void); - /** @brief Set cursor to specified position - + @param x horizontal position\n (0: left most position) @param y vertical position\n (0: first line) @return none */ extern void lcd_gotoxy(uint8_t x, uint8_t y); - /** @brief Display character at current cursor position - @param c character to be displayed + @param c character to be displayed @return none */ extern void lcd_putc(char c); - /** @brief Display string without auto linefeed - @param s string to be displayed + @param s string to be displayed @return none */ extern void lcd_puts(const char *s); - /** @brief Display string from program memory without auto linefeed - @param progmem_s string from program memory be be displayed + @param progmem_s string from program memory be be displayed @return none @see lcd_puts_P */ extern void lcd_puts_p(const char *progmem_s); - /** @brief Send LCD controller instruction command @param cmd instruction to send to LCD controller, see HD44780 data sheet @@ -349,23 +331,20 @@ extern void lcd_puts_p(const char *progmem_s); */ extern void lcd_command(uint8_t cmd); - /** - @brief Send data byte to LCD controller - + @brief Send data byte to LCD controller + Similar to lcd_putc(), but without interpreting LF @param data byte to send to LCD controller, see HD44780 data sheet @return none */ extern void lcd_data(uint8_t data); - /** @brief macros for automatically storing string constant in program memory */ -#define lcd_puts_P(__s) lcd_puts_p(PSTR(__s)) +#define lcd_puts_P(__s) lcd_puts_p(PSTR(__s)) /**@}*/ -#endif //LCD_H - +#endif // LCD_H diff --git a/drivers/avr/i2c_master.c b/drivers/avr/i2c_master.c index 0acc246426..52924437e0 100755..100644 --- a/drivers/avr/i2c_master.c +++ b/drivers/avr/i2c_master.c @@ -25,200 +25,200 @@ #include "wait.h" #ifndef F_SCL -# define F_SCL 400000UL // SCL frequency +# define F_SCL 400000UL // SCL frequency #endif #define Prescaler 1 #define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16) / 2) void i2c_init(void) { - TWSR = 0; /* no prescaler */ - TWBR = (uint8_t)TWBR_val; + TWSR = 0; /* no prescaler */ + TWBR = (uint8_t)TWBR_val; - #ifdef __AVR_ATmega32A__ - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; +#ifdef __AVR_ATmega32A__ + // set pull-up resistors on I2C bus pins + PORTC |= 0b11; - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); + // enable TWI (two-wire interface) + TWCR |= (1 << TWEN); - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); - #endif + // enable TWI interrupt and slave address ACK + TWCR |= (1 << TWIE); + TWCR |= (1 << TWEA); +#endif } i2c_status_t i2c_start(uint8_t address, uint16_t timeout) { - // reset TWI control register - TWCR = 0; - // transmit START condition - TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN); - - uint16_t timeout_timer = timer_read(); - while (!(TWCR & (1 << TWINT))) { - if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { - return I2C_STATUS_TIMEOUT; - } - } - - // check if the start condition was successfully transmitted - if (((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)) { - return I2C_STATUS_ERROR; - } - - // load slave address into data register - TWDR = address; - // start transmission of address - TWCR = (1 << TWINT) | (1 << TWEN); - - timeout_timer = timer_read(); - while (!(TWCR & (1 << TWINT))) { - if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { - return I2C_STATUS_TIMEOUT; - } - } - - // check if the device has acknowledged the READ / WRITE mode - uint8_t twst = TW_STATUS & 0xF8; - if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { - return I2C_STATUS_ERROR; - } - - return I2C_STATUS_SUCCESS; + // reset TWI control register + TWCR = 0; + // transmit START condition + TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN); + + uint16_t timeout_timer = timer_read(); + while (!(TWCR & (1 << TWINT))) { + if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { + return I2C_STATUS_TIMEOUT; + } + } + + // check if the start condition was successfully transmitted + if (((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)) { + return I2C_STATUS_ERROR; + } + + // load slave address into data register + TWDR = address; + // start transmission of address + TWCR = (1 << TWINT) | (1 << TWEN); + + timeout_timer = timer_read(); + while (!(TWCR & (1 << TWINT))) { + if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { + return I2C_STATUS_TIMEOUT; + } + } + + // check if the device has acknowledged the READ / WRITE mode + uint8_t twst = TW_STATUS & 0xF8; + if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { + return I2C_STATUS_ERROR; + } + + return I2C_STATUS_SUCCESS; } i2c_status_t i2c_write(uint8_t data, uint16_t timeout) { - // load data into data register - TWDR = data; - // start transmission of data - TWCR = (1 << TWINT) | (1 << TWEN); - - uint16_t timeout_timer = timer_read(); - while (!(TWCR & (1 << TWINT))) { - if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { - return I2C_STATUS_TIMEOUT; + // load data into data register + TWDR = data; + // start transmission of data + TWCR = (1 << TWINT) | (1 << TWEN); + + uint16_t timeout_timer = timer_read(); + while (!(TWCR & (1 << TWINT))) { + if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { + return I2C_STATUS_TIMEOUT; + } } - } - if ((TW_STATUS & 0xF8) != TW_MT_DATA_ACK) { - return I2C_STATUS_ERROR; - } + if ((TW_STATUS & 0xF8) != TW_MT_DATA_ACK) { + return I2C_STATUS_ERROR; + } - return I2C_STATUS_SUCCESS; + return I2C_STATUS_SUCCESS; } int16_t i2c_read_ack(uint16_t timeout) { - // start TWI module and acknowledge data after reception - TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA); - - uint16_t timeout_timer = timer_read(); - while (!(TWCR & (1 << TWINT))) { - if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { - return I2C_STATUS_TIMEOUT; + // start TWI module and acknowledge data after reception + TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA); + + uint16_t timeout_timer = timer_read(); + while (!(TWCR & (1 << TWINT))) { + if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { + return I2C_STATUS_TIMEOUT; + } } - } - // return received data from TWDR - return TWDR; + // return received data from TWDR + return TWDR; } int16_t i2c_read_nack(uint16_t timeout) { - // start receiving without acknowledging reception - TWCR = (1 << TWINT) | (1 << TWEN); - - uint16_t timeout_timer = timer_read(); - while (!(TWCR & (1 << TWINT))) { - if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { - return I2C_STATUS_TIMEOUT; + // start receiving without acknowledging reception + TWCR = (1 << TWINT) | (1 << TWEN); + + uint16_t timeout_timer = timer_read(); + while (!(TWCR & (1 << TWINT))) { + if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { + return I2C_STATUS_TIMEOUT; + } } - } - // return received data from TWDR - return TWDR; + // return received data from TWDR + return TWDR; } i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_status_t status = i2c_start(address | I2C_WRITE, timeout); + i2c_status_t status = i2c_start(address | I2C_WRITE, timeout); - for (uint16_t i = 0; i < length && status >= 0; i++) { - status = i2c_write(data[i], timeout); - } + for (uint16_t i = 0; i < length && status >= 0; i++) { + status = i2c_write(data[i], timeout); + } - i2c_stop(); + i2c_stop(); - return status; + return status; } i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_status_t status = i2c_start(address | I2C_READ, timeout); + i2c_status_t status = i2c_start(address | I2C_READ, timeout); - for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) { - status = i2c_read_ack(timeout); - if (status >= 0) { - data[i] = status; + for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) { + status = i2c_read_ack(timeout); + if (status >= 0) { + data[i] = status; + } } - } - if (status >= 0) { - status = i2c_read_nack(timeout); if (status >= 0) { - data[(length - 1)] = status; + status = i2c_read_nack(timeout); + if (status >= 0) { + data[(length - 1)] = status; + } } - } - i2c_stop(); + i2c_stop(); - return (status < 0) ? status : I2C_STATUS_SUCCESS; + return (status < 0) ? status : I2C_STATUS_SUCCESS; } i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_status_t status = i2c_start(devaddr | 0x00, timeout); - if (status >= 0) { - status = i2c_write(regaddr, timeout); + i2c_status_t status = i2c_start(devaddr | 0x00, timeout); + if (status >= 0) { + status = i2c_write(regaddr, timeout); - for (uint16_t i = 0; i < length && status >= 0; i++) { - status = i2c_write(data[i], timeout); + for (uint16_t i = 0; i < length && status >= 0; i++) { + status = i2c_write(data[i], timeout); + } } - } - i2c_stop(); + i2c_stop(); - return status; + return status; } i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_status_t status = i2c_start(devaddr, timeout); - if (status < 0) { - goto error; - } + i2c_status_t status = i2c_start(devaddr, timeout); + if (status < 0) { + goto error; + } - status = i2c_write(regaddr, timeout); - if (status < 0) { - goto error; - } + status = i2c_write(regaddr, timeout); + if (status < 0) { + goto error; + } - status = i2c_start(devaddr | 0x01, timeout); + status = i2c_start(devaddr | 0x01, timeout); - for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) { - status = i2c_read_ack(timeout); - if (status >= 0) { - data[i] = status; + for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) { + status = i2c_read_ack(timeout); + if (status >= 0) { + data[i] = status; + } } - } - if (status >= 0) { - status = i2c_read_nack(timeout); if (status >= 0) { - data[(length - 1)] = status; + status = i2c_read_nack(timeout); + if (status >= 0) { + data[(length - 1)] = status; + } } - } error: - i2c_stop(); + i2c_stop(); - return (status < 0) ? status : I2C_STATUS_SUCCESS; + return (status < 0) ? status : I2C_STATUS_SUCCESS; } void i2c_stop(void) { - // transmit STOP condition - TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO); + // transmit STOP condition + TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO); } diff --git a/drivers/avr/i2c_master.h b/drivers/avr/i2c_master.h index d68142430a..0a3b6c508c 100755..100644 --- a/drivers/avr/i2c_master.h +++ b/drivers/avr/i2c_master.h @@ -26,21 +26,21 @@ typedef int16_t i2c_status_t; #define I2C_STATUS_SUCCESS (0) -#define I2C_STATUS_ERROR (-1) +#define I2C_STATUS_ERROR (-1) #define I2C_STATUS_TIMEOUT (-2) #define I2C_TIMEOUT_IMMEDIATE (0) #define I2C_TIMEOUT_INFINITE (0xFFFF) -void i2c_init(void); +void i2c_init(void); i2c_status_t i2c_start(uint8_t address, uint16_t timeout); i2c_status_t i2c_write(uint8_t data, uint16_t timeout); -int16_t i2c_read_ack(uint16_t timeout); -int16_t i2c_read_nack(uint16_t timeout); +int16_t i2c_read_ack(uint16_t timeout); +int16_t i2c_read_nack(uint16_t timeout); i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); -void i2c_stop(void); +void i2c_stop(void); -#endif // I2C_MASTER_H +#endif // I2C_MASTER_H diff --git a/drivers/avr/i2c_slave.c b/drivers/avr/i2c_slave.c index 4958a0f8e5..3fb684f70a 100755..100644 --- a/drivers/avr/i2c_slave.c +++ b/drivers/avr/i2c_slave.c @@ -27,24 +27,24 @@ volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT]; static volatile uint8_t buffer_address; -static volatile bool slave_has_register_set = false; +static volatile bool slave_has_register_set = false; -void i2c_slave_init(uint8_t address){ +void i2c_slave_init(uint8_t address) { // load address into TWI address register TWAR = address; // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN); } -void i2c_slave_stop(void){ +void i2c_slave_stop(void) { // clear acknowledge and enable bits TWCR &= ~((1 << TWEA) | (1 << TWEN)); } -ISR(TWI_vect){ +ISR(TWI_vect) { uint8_t ack = 1; - switch(TW_STATUS){ + switch (TW_STATUS) { case TW_SR_SLA_ACK: // The device is now a slave receiver slave_has_register_set = false; @@ -53,14 +53,14 @@ ISR(TWI_vect){ case TW_SR_DATA_ACK: // This device is a slave receiver and has received data // First byte is the location then the bytes will be writen in buffer with auto-incriment - if(!slave_has_register_set){ + if (!slave_has_register_set) { buffer_address = TWDR; if (buffer_address >= I2C_SLAVE_REG_COUNT) { // address out of bounds dont ack - ack = 0; - buffer_address = 0; + ack = 0; + buffer_address = 0; } - slave_has_register_set = true; // address has been receaved now fill in buffer + slave_has_register_set = true; // address has been receaved now fill in buffer } else { i2c_slave_reg[buffer_address] = TWDR; buffer_address++; diff --git a/drivers/avr/i2c_slave.h b/drivers/avr/i2c_slave.h index 2f4589e9c7..5ed0b11a8e 100755..100644 --- a/drivers/avr/i2c_slave.h +++ b/drivers/avr/i2c_slave.h @@ -30,4 +30,4 @@ extern volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT]; void i2c_slave_init(uint8_t address); void i2c_slave_stop(void); -#endif // I2C_SLAVE_H +#endif // I2C_SLAVE_H diff --git a/drivers/avr/pro_micro.h b/drivers/avr/pro_micro.h index f9e7ed75d9..762a99a058 100644 --- a/drivers/avr/pro_micro.h +++ b/drivers/avr/pro_micro.h @@ -90,14 +90,14 @@ #undef OCR2_6 #undef OCR2_7 -#define NUM_DIGITAL_PINS 30 +#define NUM_DIGITAL_PINS 30 #define NUM_ANALOG_INPUTS 12 -#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) -#define TXLED0 PORTD |= (1<<5) -#define TXLED1 PORTD &= ~(1<<5) -#define RXLED0 PORTB |= (1<<0) -#define RXLED1 PORTB &= ~(1<<0) +#define TX_RX_LED_INIT DDRD |= (1 << 5), DDRB |= (1 << 0) +#define TXLED0 PORTD |= (1 << 5) +#define TXLED1 PORTD &= ~(1 << 5) +#define RXLED0 PORTB |= (1 << 0) +#define RXLED1 PORTB &= ~(1 << 0) static const uint8_t SDA = 2; static const uint8_t SCL = 3; @@ -111,27 +111,27 @@ static const uint8_t SCK = 15; // Mapping of analog pins as digital I/O // A6-A11 share with digital pins -static const uint8_t ADC0 = 18; -static const uint8_t ADC1 = 19; -static const uint8_t ADC2 = 20; -static const uint8_t ADC3 = 21; -static const uint8_t ADC4 = 22; -static const uint8_t ADC5 = 23; -static const uint8_t ADC6 = 24; // D4 -static const uint8_t ADC7 = 25; // D6 -static const uint8_t ADC8 = 26; // D8 -static const uint8_t ADC9 = 27; // D9 +static const uint8_t ADC0 = 18; +static const uint8_t ADC1 = 19; +static const uint8_t ADC2 = 20; +static const uint8_t ADC3 = 21; +static const uint8_t ADC4 = 22; +static const uint8_t ADC5 = 23; +static const uint8_t ADC6 = 24; // D4 +static const uint8_t ADC7 = 25; // D6 +static const uint8_t ADC8 = 26; // D8 +static const uint8_t ADC9 = 27; // D9 static const uint8_t ADC10 = 28; // D10 static const uint8_t ADC11 = 29; // D12 -#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) #define digitalPinToPCICRbit(p) 0 -#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) -#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) +#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) +#define digitalPinToPCMSKbit(p) (((p) >= 8 && (p) <= 11) ? (p)-4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) // __AVR_ATmega32U4__ has an unusual mapping of pins to channels extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; -#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) +#define analogPinToChannel(P) (pgm_read_byte(analog_pin_to_channel_PGM + (P))) #define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) @@ -182,159 +182,121 @@ extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; // appropriate addresses for various functions (e.g. reading // and writing) const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, - (uint16_t) &DDRE, - (uint16_t) &DDRF, + NOT_A_PORT, NOT_A_PORT, (uint16_t)&DDRB, (uint16_t)&DDRC, (uint16_t)&DDRD, (uint16_t)&DDRE, (uint16_t)&DDRF, }; const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, - (uint16_t) &PORTE, - (uint16_t) &PORTF, + NOT_A_PORT, NOT_A_PORT, (uint16_t)&PORTB, (uint16_t)&PORTC, (uint16_t)&PORTD, (uint16_t)&PORTE, (uint16_t)&PORTF, }; const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, - (uint16_t) &PINE, - (uint16_t) &PINF, + NOT_A_PORT, NOT_A_PORT, (uint16_t)&PINB, (uint16_t)&PINC, (uint16_t)&PIND, (uint16_t)&PINE, (uint16_t)&PINF, }; const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - PD, // D0 - PD2 - PD, // D1 - PD3 - PD, // D2 - PD1 - PD, // D3 - PD0 - PD, // D4 - PD4 - PC, // D5 - PC6 - PD, // D6 - PD7 - PE, // D7 - PE6 - - PB, // D8 - PB4 - PB, // D9 - PB5 - PB, // D10 - PB6 - PB, // D11 - PB7 - PD, // D12 - PD6 - PC, // D13 - PC7 - - PB, // D14 - MISO - PB3 - PB, // D15 - SCK - PB1 - PB, // D16 - MOSI - PB2 - PB, // D17 - SS - PB0 - - PF, // D18 - A0 - PF7 - PF, // D19 - A1 - PF6 - PF, // D20 - A2 - PF5 - PF, // D21 - A3 - PF4 - PF, // D22 - A4 - PF1 - PF, // D23 - A5 - PF0 - - PD, // D24 - PD5 - PD, // D25 / D6 - A7 - PD7 - PB, // D26 / D8 - A8 - PB4 - PB, // D27 / D9 - A9 - PB5 - PB, // D28 / D10 - A10 - PB6 - PD, // D29 / D12 - A11 - PD6 + PD, // D0 - PD2 + PD, // D1 - PD3 + PD, // D2 - PD1 + PD, // D3 - PD0 + PD, // D4 - PD4 + PC, // D5 - PC6 + PD, // D6 - PD7 + PE, // D7 - PE6 + + PB, // D8 - PB4 + PB, // D9 - PB5 + PB, // D10 - PB6 + PB, // D11 - PB7 + PD, // D12 - PD6 + PC, // D13 - PC7 + + PB, // D14 - MISO - PB3 + PB, // D15 - SCK - PB1 + PB, // D16 - MOSI - PB2 + PB, // D17 - SS - PB0 + + PF, // D18 - A0 - PF7 + PF, // D19 - A1 - PF6 + PF, // D20 - A2 - PF5 + PF, // D21 - A3 - PF4 + PF, // D22 - A4 - PF1 + PF, // D23 - A5 - PF0 + + PD, // D24 - PD5 + PD, // D25 / D6 - A7 - PD7 + PB, // D26 / D8 - A8 - PB4 + PB, // D27 / D9 - A9 - PB5 + PB, // D28 / D10 - A10 - PB6 + PD, // D29 / D12 - A11 - PD6 }; const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - _BV(2), // D0 - PD2 - _BV(3), // D1 - PD3 - _BV(1), // D2 - PD1 - _BV(0), // D3 - PD0 - _BV(4), // D4 - PD4 - _BV(6), // D5 - PC6 - _BV(7), // D6 - PD7 - _BV(6), // D7 - PE6 - - _BV(4), // D8 - PB4 - _BV(5), // D9 - PB5 - _BV(6), // D10 - PB6 - _BV(7), // D11 - PB7 - _BV(6), // D12 - PD6 - _BV(7), // D13 - PC7 - - _BV(3), // D14 - MISO - PB3 - _BV(1), // D15 - SCK - PB1 - _BV(2), // D16 - MOSI - PB2 - _BV(0), // D17 - SS - PB0 - - _BV(7), // D18 - A0 - PF7 - _BV(6), // D19 - A1 - PF6 - _BV(5), // D20 - A2 - PF5 - _BV(4), // D21 - A3 - PF4 - _BV(1), // D22 - A4 - PF1 - _BV(0), // D23 - A5 - PF0 - - _BV(5), // D24 - PD5 - _BV(7), // D25 / D6 - A7 - PD7 - _BV(4), // D26 / D8 - A8 - PB4 - _BV(5), // D27 / D9 - A9 - PB5 - _BV(6), // D28 / D10 - A10 - PB6 - _BV(6), // D29 / D12 - A11 - PD6 + _BV(2), // D0 - PD2 + _BV(3), // D1 - PD3 + _BV(1), // D2 - PD1 + _BV(0), // D3 - PD0 + _BV(4), // D4 - PD4 + _BV(6), // D5 - PC6 + _BV(7), // D6 - PD7 + _BV(6), // D7 - PE6 + + _BV(4), // D8 - PB4 + _BV(5), // D9 - PB5 + _BV(6), // D10 - PB6 + _BV(7), // D11 - PB7 + _BV(6), // D12 - PD6 + _BV(7), // D13 - PC7 + + _BV(3), // D14 - MISO - PB3 + _BV(1), // D15 - SCK - PB1 + _BV(2), // D16 - MOSI - PB2 + _BV(0), // D17 - SS - PB0 + + _BV(7), // D18 - A0 - PF7 + _BV(6), // D19 - A1 - PF6 + _BV(5), // D20 - A2 - PF5 + _BV(4), // D21 - A3 - PF4 + _BV(1), // D22 - A4 - PF1 + _BV(0), // D23 - A5 - PF0 + + _BV(5), // D24 - PD5 + _BV(7), // D25 / D6 - A7 - PD7 + _BV(4), // D26 / D8 - A8 - PB4 + _BV(5), // D27 / D9 - A9 - PB5 + _BV(6), // D28 / D10 - A10 - PB6 + _BV(6), // D29 / D12 - A11 - PD6 }; const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - TIMER0B, /* 3 */ - NOT_ON_TIMER, - TIMER3A, /* 5 */ - TIMER4D, /* 6 */ + NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, TIMER0B, /* 3 */ + NOT_ON_TIMER, TIMER3A, /* 5 */ + TIMER4D, /* 6 */ NOT_ON_TIMER, - NOT_ON_TIMER, - TIMER1A, /* 9 */ - TIMER1B, /* 10 */ - TIMER0A, /* 11 */ + NOT_ON_TIMER, TIMER1A, /* 9 */ + TIMER1B, /* 10 */ + TIMER0A, /* 11 */ - NOT_ON_TIMER, - TIMER4A, /* 13 */ + NOT_ON_TIMER, TIMER4A, /* 13 */ - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, + NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, + NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, }; const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { - 7, // A0 PF7 ADC7 - 6, // A1 PF6 ADC6 - 5, // A2 PF5 ADC5 - 4, // A3 PF4 ADC4 - 1, // A4 PF1 ADC1 - 0, // A5 PF0 ADC0 - 8, // A6 D4 PD4 ADC8 - 10, // A7 D6 PD7 ADC10 - 11, // A8 D8 PB4 ADC11 - 12, // A9 D9 PB5 ADC12 - 13, // A10 D10 PB6 ADC13 - 9 // A11 D12 PD6 ADC9 + 7, // A0 PF7 ADC7 + 6, // A1 PF6 ADC6 + 5, // A2 PF5 ADC5 + 4, // A3 PF4 ADC4 + 1, // A4 PF1 ADC1 + 0, // A5 PF0 ADC0 + 8, // A6 D4 PD4 ADC8 + 10, // A7 D6 PD7 ADC10 + 11, // A8 D8 PB4 ADC11 + 12, // A9 D9 PB5 ADC12 + 13, // A10 D10 PB6 ADC13 + 9 // A11 D12 PD6 ADC9 }; #endif /* ARDUINO_MAIN */ @@ -354,9 +316,9 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { // // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX // pins are NOT connected to anything by default. -#define SERIAL_PORT_MONITOR Serial -#define SERIAL_PORT_USBVIRTUAL Serial -#define SERIAL_PORT_HARDWARE Serial1 -#define SERIAL_PORT_HARDWARE_OPEN Serial1 +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 #endif /* Pins_Arduino_h */ diff --git a/drivers/avr/ssd1306.c b/drivers/avr/ssd1306.c index bb8938bba3..61d7a99531 100644 --- a/drivers/avr/ssd1306.c +++ b/drivers/avr/ssd1306.c @@ -1,325 +1,320 @@ #ifdef SSD1306OLED -#include "ssd1306.h" -#include "i2c.h" -#include <string.h> -#include "print.h" -#include "glcdfont.c" -#ifdef ADAFRUIT_BLE_ENABLE -#include "adafruit_ble.h" -#endif -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#endif -#include "sendchar.h" -#include "timer.h" +# include "ssd1306.h" +# include "i2c.h" +# include <string.h> +# include "print.h" +# include "glcdfont.c" +# ifdef ADAFRUIT_BLE_ENABLE +# include "adafruit_ble.h" +# endif +# ifdef PROTOCOL_LUFA +# include "lufa.h" +# endif +# include "sendchar.h" +# include "timer.h" // Set this to 1 to help diagnose early startup problems // when testing power-on with ble. Turn it off otherwise, // as the latency of printing most of the debug info messes // with the matrix scan, causing keys to drop. -#define DEBUG_TO_SCREEN 0 +# define DEBUG_TO_SCREEN 0 -//static uint16_t last_battery_update; -//static uint32_t vbat; +// static uint16_t last_battery_update; +// static uint32_t vbat; //#define BatteryUpdateInterval 10000 /* milliseconds */ -#define ScreenOffInterval 300000 /* milliseconds */ -#if DEBUG_TO_SCREEN +# define ScreenOffInterval 300000 /* milliseconds */ +# if DEBUG_TO_SCREEN static uint8_t displaying; -#endif +# endif static uint16_t last_flush; // Write command sequence. // Returns true on success. static inline bool _send_cmd1(uint8_t cmd) { - bool res = false; + bool res = false; - if (i2c_start_write(SSD1306_ADDRESS)) { - xprintf("failed to start write to %d\n", SSD1306_ADDRESS); - goto done; - } + if (i2c_start_write(SSD1306_ADDRESS)) { + xprintf("failed to start write to %d\n", SSD1306_ADDRESS); + goto done; + } - if (i2c_master_write(0x0 /* command byte follows */)) { - print("failed to write control byte\n"); + if (i2c_master_write(0x0 /* command byte follows */)) { + print("failed to write control byte\n"); - goto done; - } + goto done; + } - if (i2c_master_write(cmd)) { - xprintf("failed to write command %d\n", cmd); - goto done; - } - res = true; + if (i2c_master_write(cmd)) { + xprintf("failed to write command %d\n", cmd); + goto done; + } + res = true; done: - i2c_master_stop(); - return res; + i2c_master_stop(); + return res; } // Write 2-byte command sequence. // Returns true on success static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { - if (!_send_cmd1(cmd)) { - return false; - } - return _send_cmd1(opr); + if (!_send_cmd1(cmd)) { + return false; + } + return _send_cmd1(opr); } // Write 3-byte command sequence. // Returns true on success static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { - if (!_send_cmd1(cmd)) { - return false; - } - if (!_send_cmd1(opr1)) { - return false; - } - return _send_cmd1(opr2); + if (!_send_cmd1(cmd)) { + return false; + } + if (!_send_cmd1(opr1)) { + return false; + } + return _send_cmd1(opr2); } -#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} -#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} -#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} +# define send_cmd1(c) \ + if (!_send_cmd1(c)) { \ + goto done; \ + } +# define send_cmd2(c, o) \ + if (!_send_cmd2(c, o)) { \ + goto done; \ + } +# define send_cmd3(c, o1, o2) \ + if (!_send_cmd3(c, o1, o2)) { \ + goto done; \ + } static void clear_display(void) { - matrix_clear(&display); - - // Clear all of the display bits (there can be random noise - // in the RAM on startup) - send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); - send_cmd3(ColumnAddr, 0, DisplayWidth - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < DisplayWidth; ++col) { - i2c_master_write(0); + matrix_clear(&display); + + // Clear all of the display bits (there can be random noise + // in the RAM on startup) + send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); + send_cmd3(ColumnAddr, 0, DisplayWidth - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < DisplayWidth; ++col) { + i2c_master_write(0); + } } - } - display.dirty = false; + display.dirty = false; done: - i2c_master_stop(); + i2c_master_stop(); } -#if DEBUG_TO_SCREEN -#undef sendchar +# if DEBUG_TO_SCREEN +# undef sendchar static int8_t capture_sendchar(uint8_t c) { - sendchar(c); - iota_gfx_write_char(c); + sendchar(c); + iota_gfx_write_char(c); - if (!displaying) { - iota_gfx_flush(); - } - return 0; + if (!displaying) { + iota_gfx_flush(); + } + return 0; } -#endif +# endif bool iota_gfx_init(void) { - bool success = false; + bool success = false; - send_cmd1(DisplayOff); - send_cmd2(SetDisplayClockDiv, 0x80); - send_cmd2(SetMultiPlex, DisplayHeight - 1); + send_cmd1(DisplayOff); + send_cmd2(SetDisplayClockDiv, 0x80); + send_cmd2(SetMultiPlex, DisplayHeight - 1); - send_cmd2(SetDisplayOffset, 0); + send_cmd2(SetDisplayOffset, 0); + send_cmd1(SetStartLine | 0x0); + send_cmd2(SetChargePump, 0x14 /* Enable */); + send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); - send_cmd1(SetStartLine | 0x0); - send_cmd2(SetChargePump, 0x14 /* Enable */); - send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); +# ifdef OLED_ROTATE180 + // the following Flip the display orientation 180 degrees + send_cmd1(SegRemap); + send_cmd1(ComScanInc); +# endif +# ifndef OLED_ROTATE180 + // Flips the display orientation 0 degrees + send_cmd1(SegRemap | 0x1); + send_cmd1(ComScanDec); +# endif -#ifdef OLED_ROTATE180 -// the following Flip the display orientation 180 degrees - send_cmd1(SegRemap); - send_cmd1(ComScanInc); -#endif -#ifndef OLED_ROTATE180 -// Flips the display orientation 0 degrees - send_cmd1(SegRemap | 0x1); - send_cmd1(ComScanDec); -#endif - - send_cmd2(SetComPins, 0x2); - send_cmd2(SetContrast, 0x8f); - send_cmd2(SetPreCharge, 0xf1); - send_cmd2(SetVComDetect, 0x40); - send_cmd1(DisplayAllOnResume); - send_cmd1(NormalDisplay); - send_cmd1(DeActivateScroll); - send_cmd1(DisplayOn); + send_cmd2(SetComPins, 0x2); + send_cmd2(SetContrast, 0x8f); + send_cmd2(SetPreCharge, 0xf1); + send_cmd2(SetVComDetect, 0x40); + send_cmd1(DisplayAllOnResume); + send_cmd1(NormalDisplay); + send_cmd1(DeActivateScroll); + send_cmd1(DisplayOn); - send_cmd2(SetContrast, 0); // Dim + send_cmd2(SetContrast, 0); // Dim - clear_display(); + clear_display(); - success = true; + success = true; - iota_gfx_flush(); + iota_gfx_flush(); -#if DEBUG_TO_SCREEN - print_set_sendchar(capture_sendchar); -#endif +# if DEBUG_TO_SCREEN + print_set_sendchar(capture_sendchar); +# endif done: - return success; + return success; } bool iota_gfx_off(void) { - bool success = false; + bool success = false; - send_cmd1(DisplayOff); - success = true; + send_cmd1(DisplayOff); + success = true; done: - return success; -} + return success; +} bool iota_gfx_on(void) { - bool success = false; + bool success = false; - send_cmd1(DisplayOn); - success = true; + send_cmd1(DisplayOn); + success = true; done: - return success; + return success; } void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { - *matrix->cursor = c; - ++matrix->cursor; - - if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { - // We went off the end; scroll the display upwards by one line - memmove(&matrix->display[0], &matrix->display[1], - MatrixCols * (MatrixRows - 1)); - matrix->cursor = &matrix->display[MatrixRows - 1][0]; - memset(matrix->cursor, ' ', MatrixCols); - } + *matrix->cursor = c; + ++matrix->cursor; + + if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { + // We went off the end; scroll the display upwards by one line + memmove(&matrix->display[0], &matrix->display[1], MatrixCols * (MatrixRows - 1)); + matrix->cursor = &matrix->display[MatrixRows - 1][0]; + memset(matrix->cursor, ' ', MatrixCols); + } } void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { - matrix->dirty = true; + matrix->dirty = true; - if (c == '\n') { - // Clear to end of line from the cursor and then move to the - // start of the next line - uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; + if (c == '\n') { + // Clear to end of line from the cursor and then move to the + // start of the next line + uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; - while (cursor_col++ < MatrixCols) { - matrix_write_char_inner(matrix, ' '); + while (cursor_col++ < MatrixCols) { + matrix_write_char_inner(matrix, ' '); + } + return; } - return; - } - matrix_write_char_inner(matrix, c); + matrix_write_char_inner(matrix, c); } -void iota_gfx_write_char(uint8_t c) { - matrix_write_char(&display, c); -} +void iota_gfx_write_char(uint8_t c) { matrix_write_char(&display, c); } void matrix_write(struct CharacterMatrix *matrix, const char *data) { - const char *end = data + strlen(data); - while (data < end) { - matrix_write_char(matrix, *data); - ++data; - } + const char *end = data + strlen(data); + while (data < end) { + matrix_write_char(matrix, *data); + ++data; + } } -void iota_gfx_write(const char *data) { - matrix_write(&display, data); -} +void iota_gfx_write(const char *data) { matrix_write(&display, data); } void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { - while (true) { - uint8_t c = pgm_read_byte(data); - if (c == 0) { - return; + while (true) { + uint8_t c = pgm_read_byte(data); + if (c == 0) { + return; + } + matrix_write_char(matrix, c); + ++data; } - matrix_write_char(matrix, c); - ++data; - } } -void iota_gfx_write_P(const char *data) { - matrix_write_P(&display, data); -} +void iota_gfx_write_P(const char *data) { matrix_write_P(&display, data); } void matrix_clear(struct CharacterMatrix *matrix) { - memset(matrix->display, ' ', sizeof(matrix->display)); - matrix->cursor = &matrix->display[0][0]; - matrix->dirty = true; + memset(matrix->display, ' ', sizeof(matrix->display)); + matrix->cursor = &matrix->display[0][0]; + matrix->dirty = true; } -void iota_gfx_clear_screen(void) { - matrix_clear(&display); -} +void iota_gfx_clear_screen(void) { matrix_clear(&display); } void matrix_render(struct CharacterMatrix *matrix) { - last_flush = timer_read(); - iota_gfx_on(); -#if DEBUG_TO_SCREEN - ++displaying; -#endif + last_flush = timer_read(); + iota_gfx_on(); +# if DEBUG_TO_SCREEN + ++displaying; +# endif + + // Move to the home position + send_cmd3(PageAddr, 0, MatrixRows - 1); + send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < MatrixCols; ++col) { + const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1)); + + for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) { + uint8_t colBits = pgm_read_byte(glyph + glyphCol); + i2c_master_write(colBits); + } - // Move to the home position - send_cmd3(PageAddr, 0, MatrixRows - 1); - send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < MatrixCols; ++col) { - const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1)); - - for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) { - uint8_t colBits = pgm_read_byte(glyph + glyphCol); - i2c_master_write(colBits); - } - - // 1 column of space between chars (it's not included in the glyph) - i2c_master_write(0); + // 1 column of space between chars (it's not included in the glyph) + i2c_master_write(0); + } } - } - matrix->dirty = false; + matrix->dirty = false; done: - i2c_master_stop(); -#if DEBUG_TO_SCREEN - --displaying; -#endif + i2c_master_stop(); +# if DEBUG_TO_SCREEN + --displaying; +# endif } -void iota_gfx_flush(void) { - matrix_render(&display); -} +void iota_gfx_flush(void) { matrix_render(&display); } -__attribute__ ((weak)) -void iota_gfx_task_user(void) { -} +__attribute__((weak)) void iota_gfx_task_user(void) {} void iota_gfx_task(void) { - iota_gfx_task_user(); + iota_gfx_task_user(); - if (display.dirty) { - iota_gfx_flush(); - } + if (display.dirty) { + iota_gfx_flush(); + } - if (timer_elapsed(last_flush) > ScreenOffInterval) { - iota_gfx_off(); - } + if (timer_elapsed(last_flush) > ScreenOffInterval) { + iota_gfx_off(); + } } #endif diff --git a/drivers/avr/ssd1306.h b/drivers/avr/ssd1306.h index df6a75359f..825b0d7d5b 100644 --- a/drivers/avr/ssd1306.h +++ b/drivers/avr/ssd1306.h @@ -7,49 +7,49 @@ #include "config.h" enum ssd1306_cmds { - DisplayOff = 0xAE, - DisplayOn = 0xAF, - - SetContrast = 0x81, - DisplayAllOnResume = 0xA4, - - DisplayAllOn = 0xA5, - NormalDisplay = 0xA6, - InvertDisplay = 0xA7, - SetDisplayOffset = 0xD3, - SetComPins = 0xda, - SetVComDetect = 0xdb, - SetDisplayClockDiv = 0xD5, - SetPreCharge = 0xd9, - SetMultiPlex = 0xa8, - SetLowColumn = 0x00, - SetHighColumn = 0x10, - SetStartLine = 0x40, - - SetMemoryMode = 0x20, - ColumnAddr = 0x21, - PageAddr = 0x22, - - ComScanInc = 0xc0, - ComScanDec = 0xc8, - SegRemap = 0xa0, - SetChargePump = 0x8d, - ExternalVcc = 0x01, - SwitchCapVcc = 0x02, - - ActivateScroll = 0x2f, - DeActivateScroll = 0x2e, - SetVerticalScrollArea = 0xa3, - RightHorizontalScroll = 0x26, - LeftHorizontalScroll = 0x27, - VerticalAndRightHorizontalScroll = 0x29, - VerticalAndLeftHorizontalScroll = 0x2a, + DisplayOff = 0xAE, + DisplayOn = 0xAF, + + SetContrast = 0x81, + DisplayAllOnResume = 0xA4, + + DisplayAllOn = 0xA5, + NormalDisplay = 0xA6, + InvertDisplay = 0xA7, + SetDisplayOffset = 0xD3, + SetComPins = 0xda, + SetVComDetect = 0xdb, + SetDisplayClockDiv = 0xD5, + SetPreCharge = 0xd9, + SetMultiPlex = 0xa8, + SetLowColumn = 0x00, + SetHighColumn = 0x10, + SetStartLine = 0x40, + + SetMemoryMode = 0x20, + ColumnAddr = 0x21, + PageAddr = 0x22, + + ComScanInc = 0xc0, + ComScanDec = 0xc8, + SegRemap = 0xa0, + SetChargePump = 0x8d, + ExternalVcc = 0x01, + SwitchCapVcc = 0x02, + + ActivateScroll = 0x2f, + DeActivateScroll = 0x2e, + SetVerticalScrollArea = 0xa3, + RightHorizontalScroll = 0x26, + LeftHorizontalScroll = 0x27, + VerticalAndRightHorizontalScroll = 0x29, + VerticalAndLeftHorizontalScroll = 0x2a, }; // Controls the SSD1306 128x32 OLED display via i2c #ifndef SSD1306_ADDRESS -#define SSD1306_ADDRESS 0x3C +# define SSD1306_ADDRESS 0x3C #endif #define DisplayHeight 32 @@ -62,9 +62,9 @@ enum ssd1306_cmds { #define MatrixCols (DisplayWidth / FontWidth) struct CharacterMatrix { - uint8_t display[MatrixRows][MatrixCols]; - uint8_t *cursor; - bool dirty; + uint8_t display[MatrixRows][MatrixCols]; + uint8_t *cursor; + bool dirty; }; struct CharacterMatrix display; @@ -88,6 +88,4 @@ void matrix_write(struct CharacterMatrix *matrix, const char *data); void matrix_write_P(struct CharacterMatrix *matrix, const char *data); void matrix_render(struct CharacterMatrix *matrix); - - #endif diff --git a/drivers/avr/ws2812.c b/drivers/avr/ws2812.c index 7c3cb5174d..0a02c6f7fd 100644 --- a/drivers/avr/ws2812.c +++ b/drivers/avr/ws2812.c @@ -1,25 +1,25 @@ /* -* light weight WS2812 lib V2.0b -* -* Controls WS2811/WS2812/WS2812B RGB-LEDs -* Author: Tim (cpldcpu@gmail.com) -* -* Jan 18th, 2014 v2.0b Initial Version -* Nov 29th, 2015 v2.3 Added SK6812RGBW support -* -* This program is free software: you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation, either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ + * light weight WS2812 lib V2.0b + * + * Controls WS2811/WS2812/WS2812B RGB-LEDs + * Author: Tim (cpldcpu@gmail.com) + * + * Jan 18th, 2014 v2.0b Initial Version + * Nov 29th, 2015 v2.3 Added SK6812RGBW support + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include "ws2812.h" #include <avr/interrupt.h> @@ -30,44 +30,40 @@ #if !defined(LED_ARRAY) && defined(RGB_MATRIX_ENABLE) // LED color buffer LED_TYPE led[DRIVER_LED_TOTAL]; - #define LED_ARRAY led +# define LED_ARRAY led #endif #ifdef RGBW_BB_TWI // Port for the I2C -#define I2C_DDR DDRD -#define I2C_PIN PIND -#define I2C_PORT PORTD +# define I2C_DDR DDRD +# define I2C_PIN PIND +# define I2C_PORT PORTD // Pins to be used in the bit banging -#define I2C_CLK 0 -#define I2C_DAT 1 - -#define I2C_DATA_HI()\ -I2C_DDR &= ~ (1 << I2C_DAT);\ -I2C_PORT |= (1 << I2C_DAT); -#define I2C_DATA_LO()\ -I2C_DDR |= (1 << I2C_DAT);\ -I2C_PORT &= ~ (1 << I2C_DAT); - -#define I2C_CLOCK_HI()\ -I2C_DDR &= ~ (1 << I2C_CLK);\ -I2C_PORT |= (1 << I2C_CLK); -#define I2C_CLOCK_LO()\ -I2C_DDR |= (1 << I2C_CLK);\ -I2C_PORT &= ~ (1 << I2C_CLK); - -#define I2C_DELAY 1 - -void I2C_WriteBit(unsigned char c) -{ - if (c > 0) - { +# define I2C_CLK 0 +# define I2C_DAT 1 + +# define I2C_DATA_HI() \ + I2C_DDR &= ~(1 << I2C_DAT); \ + I2C_PORT |= (1 << I2C_DAT); +# define I2C_DATA_LO() \ + I2C_DDR |= (1 << I2C_DAT); \ + I2C_PORT &= ~(1 << I2C_DAT); + +# define I2C_CLOCK_HI() \ + I2C_DDR &= ~(1 << I2C_CLK); \ + I2C_PORT |= (1 << I2C_CLK); +# define I2C_CLOCK_LO() \ + I2C_DDR |= (1 << I2C_CLK); \ + I2C_PORT &= ~(1 << I2C_CLK); + +# define I2C_DELAY 1 + +void I2C_WriteBit(unsigned char c) { + if (c > 0) { I2C_DATA_HI(); - } - else - { + } else { I2C_DATA_LO(); } @@ -77,8 +73,7 @@ void I2C_WriteBit(unsigned char c) I2C_CLOCK_LO(); _delay_us(I2C_DELAY); - if (c > 0) - { + if (c > 0) { I2C_DATA_LO(); } @@ -87,9 +82,8 @@ void I2C_WriteBit(unsigned char c) // Inits bitbanging port, must be called before using the functions below // -void I2C_Init(void) -{ - I2C_PORT &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK)); +void I2C_Init(void) { + I2C_PORT &= ~((1 << I2C_DAT) | (1 << I2C_CLK)); I2C_CLOCK_HI(); I2C_DATA_HI(); @@ -99,10 +93,9 @@ void I2C_Init(void) // Send a START Condition // -void I2C_Start(void) -{ +void I2C_Start(void) { // set both to high at the same time - I2C_DDR &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK)); + I2C_DDR &= ~((1 << I2C_DAT) | (1 << I2C_CLK)); _delay_us(I2C_DELAY); I2C_DATA_LO(); @@ -114,8 +107,7 @@ void I2C_Start(void) // Send a STOP Condition // -void I2C_Stop(void) -{ +void I2C_Stop(void) { I2C_CLOCK_HI(); _delay_us(I2C_DELAY); @@ -125,106 +117,91 @@ void I2C_Stop(void) // write a byte to the I2C slave device // -unsigned char I2C_Write(unsigned char c) -{ - for (char i = 0; i < 8; i++) - { +unsigned char I2C_Write(unsigned char c) { + for (char i = 0; i < 8; i++) { I2C_WriteBit(c & 128); c <<= 1; } - I2C_WriteBit(0); _delay_us(I2C_DELAY); _delay_us(I2C_DELAY); // _delay_us(I2C_DELAY); - //return I2C_ReadBit(); + // return I2C_ReadBit(); return 0; } - #endif #ifdef RGB_MATRIX_ENABLE // Set an led in the buffer to a color -void inline ws2812_setled(int i, uint8_t r, uint8_t g, uint8_t b) -{ +void inline ws2812_setled(int i, uint8_t r, uint8_t g, uint8_t b) { led[i].r = r; led[i].g = g; led[i].b = b; } -void ws2812_setled_all (uint8_t r, uint8_t g, uint8_t b) -{ - for (int i = 0; i < sizeof(led)/sizeof(led[0]); i++) { - led[i].r = r; - led[i].g = g; - led[i].b = b; - } +void ws2812_setled_all(uint8_t r, uint8_t g, uint8_t b) { + for (int i = 0; i < sizeof(led) / sizeof(led[0]); i++) { + led[i].r = r; + led[i].g = g; + led[i].b = b; + } } #endif // Setleds for standard RGB -void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) -{ - // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin)); - ws2812_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF)); +void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) { + // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin)); + ws2812_setleds_pin(ledarray, leds, _BV(RGB_DI_PIN & 0xF)); } -void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask) -{ - // ws2812_DDRREG |= pinmask; // Enable DDR - // new universal format (DDR) - _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask; +void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask) { + // ws2812_DDRREG |= pinmask; // Enable DDR + // new universal format (DDR) + _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask; - ws2812_sendarray_mask((uint8_t*)ledarray,leds+leds+leds,pinmask); - _delay_us(50); + ws2812_sendarray_mask((uint8_t *)ledarray, leds + leds + leds, pinmask); + _delay_us(50); } // Setleds for SK6812RGBW -void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds) -{ - - #ifdef RGBW_BB_TWI +void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds) { +#ifdef RGBW_BB_TWI uint8_t sreg_prev, twcr_prev; - sreg_prev=SREG; - twcr_prev=TWCR; + sreg_prev = SREG; + twcr_prev = TWCR; cli(); - TWCR &= ~(1<<TWEN); + TWCR &= ~(1 << TWEN); I2C_Init(); I2C_Start(); I2C_Write(0x84); - uint16_t datlen = leds<<2; - uint8_t curbyte; - uint8_t * data = (uint8_t*)ledarray; + uint16_t datlen = leds << 2; + uint8_t curbyte; + uint8_t *data = (uint8_t *)ledarray; while (datlen--) { - curbyte=*data++; - I2C_Write(curbyte); + curbyte = *data++; + I2C_Write(curbyte); } I2C_Stop(); - SREG=sreg_prev; - TWCR=twcr_prev; - #endif - - - // ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR - // new universal format (DDR) - _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF); + SREG = sreg_prev; + TWCR = twcr_prev; +#endif - ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(RGB_DI_PIN & 0xF)); + // ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR + // new universal format (DDR) + _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF); + ws2812_sendarray_mask((uint8_t *)ledarray, leds << 2, _BV(RGB_DI_PIN & 0xF)); - #ifndef RGBW_BB_TWI +#ifndef RGBW_BB_TWI _delay_us(80); - #endif +#endif } -void ws2812_sendarray(uint8_t *data,uint16_t datlen) -{ - ws2812_sendarray_mask(data,datlen,_BV(RGB_DI_PIN & 0xF)); -} +void ws2812_sendarray(uint8_t *data, uint16_t datlen) { ws2812_sendarray_mask(data, datlen, _BV(RGB_DI_PIN & 0xF)); } /* This routine writes an array of bytes with RGB values to the Dataout pin @@ -232,136 +209,133 @@ void ws2812_sendarray(uint8_t *data,uint16_t datlen) */ // Timing in ns -#define w_zeropulse 350 -#define w_onepulse 900 +#define w_zeropulse 350 +#define w_onepulse 900 #define w_totalperiod 1250 // Fixed cycles used by the inner loop -#define w_fixedlow 2 -#define w_fixedhigh 4 -#define w_fixedtotal 8 +#define w_fixedlow 2 +#define w_fixedhigh 4 +#define w_fixedtotal 8 // Insert NOPs to match the timing, if possible -#define w_zerocycles (((F_CPU/1000)*w_zeropulse )/1000000) -#define w_onecycles (((F_CPU/1000)*w_onepulse +500000)/1000000) -#define w_totalcycles (((F_CPU/1000)*w_totalperiod +500000)/1000000) +#define w_zerocycles (((F_CPU / 1000) * w_zeropulse) / 1000000) +#define w_onecycles (((F_CPU / 1000) * w_onepulse + 500000) / 1000000) +#define w_totalcycles (((F_CPU / 1000) * w_totalperiod + 500000) / 1000000) // w1 - nops between rising edge and falling edge - low -#define w1 (w_zerocycles-w_fixedlow) +#define w1 (w_zerocycles - w_fixedlow) // w2 nops between fe low and fe high -#define w2 (w_onecycles-w_fixedhigh-w1) +#define w2 (w_onecycles - w_fixedhigh - w1) // w3 nops to complete loop -#define w3 (w_totalcycles-w_fixedtotal-w1-w2) +#define w3 (w_totalcycles - w_fixedtotal - w1 - w2) -#if w1>0 - #define w1_nops w1 +#if w1 > 0 +# define w1_nops w1 #else - #define w1_nops 0 +# define w1_nops 0 #endif // The only critical timing parameter is the minimum pulse length of the "0" // Warn or throw error if this timing can not be met with current F_CPU settings. -#define w_lowtime ((w1_nops+w_fixedlow)*1000000)/(F_CPU/1000) -#if w_lowtime>550 - #error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?" -#elif w_lowtime>450 - #warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)." - #warning "Please consider a higher clockspeed, if possible" +#define w_lowtime ((w1_nops + w_fixedlow) * 1000000) / (F_CPU / 1000) +#if w_lowtime > 550 +# error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?" +#elif w_lowtime > 450 +# warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)." +# warning "Please consider a higher clockspeed, if possible" #endif -#if w2>0 -#define w2_nops w2 +#if w2 > 0 +# define w2_nops w2 #else -#define w2_nops 0 +# define w2_nops 0 #endif -#if w3>0 -#define w3_nops w3 +#if w3 > 0 +# define w3_nops w3 #else -#define w3_nops 0 +# define w3_nops 0 #endif -#define w_nop1 "nop \n\t" -#define w_nop2 "rjmp .+0 \n\t" -#define w_nop4 w_nop2 w_nop2 -#define w_nop8 w_nop4 w_nop4 +#define w_nop1 "nop \n\t" +#define w_nop2 "rjmp .+0 \n\t" +#define w_nop4 w_nop2 w_nop2 +#define w_nop8 w_nop4 w_nop4 #define w_nop16 w_nop8 w_nop8 -void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi) -{ - uint8_t curbyte,ctr,masklo; - uint8_t sreg_prev; - - // masklo =~maskhi&ws2812_PORTREG; - // maskhi |= ws2812_PORTREG; - masklo =~maskhi&_SFR_IO8((RGB_DI_PIN >> 4) + 2); - maskhi |= _SFR_IO8((RGB_DI_PIN >> 4) + 2); - sreg_prev=SREG; - cli(); - - while (datlen--) { - curbyte=(*data++); - - asm volatile( - " ldi %0,8 \n\t" - "loop%=: \n\t" - " out %2,%3 \n\t" // '1' [01] '0' [01] - re -#if (w1_nops&1) -w_nop1 +void inline ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t maskhi) { + uint8_t curbyte, ctr, masklo; + uint8_t sreg_prev; + + // masklo =~maskhi&ws2812_PORTREG; + // maskhi |= ws2812_PORTREG; + masklo = ~maskhi & _SFR_IO8((RGB_DI_PIN >> 4) + 2); + maskhi |= _SFR_IO8((RGB_DI_PIN >> 4) + 2); + sreg_prev = SREG; + cli(); + + while (datlen--) { + curbyte = (*data++); + + asm volatile(" ldi %0,8 \n\t" + "loop%=: \n\t" + " out %2,%3 \n\t" // '1' [01] '0' [01] - re +#if (w1_nops & 1) + w_nop1 #endif -#if (w1_nops&2) -w_nop2 +#if (w1_nops & 2) + w_nop2 #endif -#if (w1_nops&4) -w_nop4 +#if (w1_nops & 4) + w_nop4 #endif -#if (w1_nops&8) -w_nop8 +#if (w1_nops & 8) + w_nop8 #endif -#if (w1_nops&16) -w_nop16 +#if (w1_nops & 16) + w_nop16 #endif - " sbrs %1,7 \n\t" // '1' [03] '0' [02] - " out %2,%4 \n\t" // '1' [--] '0' [03] - fe-low - " lsl %1 \n\t" // '1' [04] '0' [04] -#if (w2_nops&1) - w_nop1 + " sbrs %1,7 \n\t" // '1' [03] '0' [02] + " out %2,%4 \n\t" // '1' [--] '0' [03] - fe-low + " lsl %1 \n\t" // '1' [04] '0' [04] +#if (w2_nops & 1) + w_nop1 #endif -#if (w2_nops&2) - w_nop2 +#if (w2_nops & 2) + w_nop2 #endif -#if (w2_nops&4) - w_nop4 +#if (w2_nops & 4) + w_nop4 #endif -#if (w2_nops&8) - w_nop8 +#if (w2_nops & 8) + w_nop8 #endif -#if (w2_nops&16) - w_nop16 +#if (w2_nops & 16) + w_nop16 #endif - " out %2,%4 \n\t" // '1' [+1] '0' [+1] - fe-high -#if (w3_nops&1) -w_nop1 + " out %2,%4 \n\t" // '1' [+1] '0' [+1] - fe-high +#if (w3_nops & 1) + w_nop1 #endif -#if (w3_nops&2) -w_nop2 +#if (w3_nops & 2) + w_nop2 #endif -#if (w3_nops&4) -w_nop4 +#if (w3_nops & 4) + w_nop4 #endif -#if (w3_nops&8) -w_nop8 +#if (w3_nops & 8) + w_nop8 #endif -#if (w3_nops&16) -w_nop16 +#if (w3_nops & 16) + w_nop16 #endif - " dec %0 \n\t" // '1' [+2] '0' [+2] - " brne loop%=\n\t" // '1' [+3] '0' [+4] - : "=&d" (ctr) - : "r" (curbyte), "I" (_SFR_IO_ADDR(_SFR_IO8((RGB_DI_PIN >> 4) + 2))), "r" (maskhi), "r" (masklo) - ); - } + " dec %0 \n\t" // '1' [+2] '0' [+2] + " brne loop%=\n\t" // '1' [+3] '0' [+4] + : "=&d"(ctr) + : "r"(curbyte), "I"(_SFR_IO_ADDR(_SFR_IO8((RGB_DI_PIN >> 4) + 2))), "r"(maskhi), "r"(masklo)); + } - SREG=sreg_prev; + SREG = sreg_prev; } diff --git a/drivers/avr/ws2812.h b/drivers/avr/ws2812.h index 95f540b184..a9dd897185 100644 --- a/drivers/avr/ws2812.h +++ b/drivers/avr/ws2812.h @@ -43,12 +43,12 @@ * - Wait 50�s to reset the LEDs */ #ifdef RGB_MATRIX_ENABLE -void ws2812_setled (int index, uint8_t r, uint8_t g, uint8_t b); -void ws2812_setled_all (uint8_t r, uint8_t g, uint8_t b); +void ws2812_setled(int index, uint8_t r, uint8_t g, uint8_t b); +void ws2812_setled_all(uint8_t r, uint8_t g, uint8_t b); #endif -void ws2812_setleds (LED_TYPE *ledarray, uint16_t number_of_leds); -void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask); +void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds); +void ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pinmask); void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds); /* @@ -58,18 +58,17 @@ void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds); * The length is the number of bytes to send - three per LED. */ -void ws2812_sendarray (uint8_t *array,uint16_t length); -void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask); - +void ws2812_sendarray(uint8_t *array, uint16_t length); +void ws2812_sendarray_mask(uint8_t *array, uint16_t length, uint8_t pinmask); /* * Internal defines */ #ifndef CONCAT -#define CONCAT(a, b) a ## b +# define CONCAT(a, b) a##b #endif #ifndef CONCAT_EXP -#define CONCAT_EXP(a, b) CONCAT(a, b) +# define CONCAT_EXP(a, b) CONCAT(a, b) #endif #endif /* LIGHT_WS2812_H_ */ |