summaryrefslogtreecommitdiff
path: root/converter/pc98_usb/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'converter/pc98_usb/config.h')
-rw-r--r--converter/pc98_usb/config.h123
1 files changed, 0 insertions, 123 deletions
diff --git a/converter/pc98_usb/config.h b/converter/pc98_usb/config.h
deleted file mode 100644
index b8d676e4cf..0000000000
--- a/converter/pc98_usb/config.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x9898
-#define DEVICE_VER 0x0100
-#define MANUFACTURER t.m.k.
-#define PRODUCT PC98 keyboard converter
-#define DESCRIPTION converts PC98 keyboard protocol into USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 16
-#define MATRIX_COLS 8
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- host_get_first_key() == KC_CANCEL \
-)
-
-
-/* PC98 Reset Port shared with TXD */
-#define PC98_RST_DDR DDRD
-#define PC98_RST_PORT PORTD
-#define PC98_RST_BIT 3
-/* PC98 Ready Port */
-#define PC98_RDY_DDR DDRD
-#define PC98_RDY_PORT PORTD
-#define PC98_RDY_BIT 4
-/* PC98 Retry Port */
-#define PC98_RTY_DDR DDRD
-#define PC98_RTY_PORT PORTD
-#define PC98_RTY_BIT 5
-
-/*
- * PC98 Serial(USART) configuration
- * asynchronous, positive logic, 19200baud, bit order: LSB first
- * 1-start bit, 8-data bit, odd parity, 1-stop bit
- */
-/*
- * Software Serial
- */
-#define SERIAL_SOFT_BAUD 19200
-#define SERIAL_SOFT_PARITY_ODD
-#define SERIAL_SOFT_BIT_ORDER_LSB
-#define SERIAL_SOFT_LOGIC_POSITIVE
-/* RXD Port */
-#define SERIAL_SOFT_RXD_DDR DDRD
-#define SERIAL_SOFT_RXD_PORT PORTD
-#define SERIAL_SOFT_RXD_PIN PIND
-#define SERIAL_SOFT_RXD_BIT 2
-#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
-/* RXD Interupt */
-#define SERIAL_SOFT_RXD_VECT INT2_vect
-#define SERIAL_SOFT_RXD_INIT() do { \
- /* pin configuration: input with pull-up */ \
- SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
- SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
- /* enable interrupt: INT2(falling edge) */ \
- EICRA |= ((1<<ISC21)|(0<<ISC20)); \
- EIMSK |= (1<<INT2); \
- sei(); \
-} while (0)
-#define SERIAL_SOFT_RXD_INT_ENTER()
-#define SERIAL_SOFT_RXD_INT_EXIT() do { \
- /* clear interrupt flag */ \
- EIFR = (1<<INTF2); \
-} while (0)
-/* TXD Port */
-#define SERIAL_SOFT_TXD_DDR DDRD
-#define SERIAL_SOFT_TXD_PORT PORTD
-#define SERIAL_SOFT_TXD_PIN PIND
-#define SERIAL_SOFT_TXD_BIT 3
-#define SERIAL_SOFT_TXD_HI() do { SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); } while (0)
-#define SERIAL_SOFT_TXD_LO() do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0)
-#define SERIAL_SOFT_TXD_INIT() do { \
- /* pin configuration: output */ \
- SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \
- /* idle */ \
- SERIAL_SOFT_TXD_ON(); \
-} while (0)
-
-
-/*
- * Hardware Serial(UART)
- */
-#ifdef __AVR_ATmega32U4__
- #define SERIAL_UART_BAUD 19200
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
- UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
- UCSR1C |= (1<<UPM11) | (1<<UPM10); /* parity: none(00), even(01), odd(11) */ \
- sei(); \
- } while(0)
-#else
- #error "USART configuration is needed."
-#endif
-
-
-#endif