summaryrefslogtreecommitdiff
path: root/converter/m0110_usb/README.md
diff options
context:
space:
mode:
Diffstat (limited to 'converter/m0110_usb/README.md')
-rw-r--r--converter/m0110_usb/README.md79
1 files changed, 0 insertions, 79 deletions
diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md
deleted file mode 100644
index bfd3261df5..0000000000
--- a/converter/m0110_usb/README.md
+++ /dev/null
@@ -1,79 +0,0 @@
-M0110/M0110A to USB keyboard converter
-======================================
-This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller like **ATmega32U2** and **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer.
-
-Read README of top directory too.
-
-Pictures of **M0110 + M0120** and **M0110A**.
-
-![M0110+M0120](http://i.imgur.com/dyvXb2Tm.jpg)
-![M0110A](http://i.imgur.com/HuHOEoHm.jpg)
-
-
-- M0110A support was contributed by [skagon@github](https://github.com/skagon).
-- M0120 also is supported. keys(+ * / and ,) on M0120 are recognized as cursor keys.
-
-
-
-Update
-------
-- 2013/08: Change port for signals `PF` to `PD`
-- 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now.
-- 2014/06: Change keymaps
-- 2015/03: Add support for "International"(ISO) keyboard(keymap_intl.c)
-
-
-
-Building Hardware
------------------
-You need [TMK converter] or AVR dev board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`.
-
-[![M0110 Converter](http://i.imgur.com/4G2ZOegm.jpg)](http://i.imgur.com/4G2ZOeg.jpg)
-
-### 4P4C phone handset cable
-Note that original cable used with Mac is **straight** while phone handset cable is **crossover**.
-
-<http://en.wikipedia.org/wiki/Modular_connector#4P4C>
-
-Close-up picture of handset cable. You can see one end of plug has reverse color codes against the other. Click to enlarge.
-[![4P4C cable](http://i.imgur.com/3S9P1mYm.jpg?1)](http://i.imgur.com/3S9P1mY.jpg?1)
-
-[Teensy]: http://www.pjrc.com/teensy/
-[TMK converter]: https://github.com/tmk/keyboard_converter
-
-
-### Socket Pinout
-- <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml>
-
-![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png)
-
-
-### Pull-up Resistor
-You may need pull-up resistors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors.
-
-
-
-Building Firmware
------------------
-To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. Also `KEYMAP` option can be used to select keymap.
-
- $ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
- $ cd m0110_usb
- $ make -f Makefile.rev2 clean
- $ make -f Makefile.rev2 [KEYMAP={default|intl|spacefn|hasu}]
-
-Use `Maefile.tmk_rev1` for TMK converter Rev.1, `Makefile.teensy` for Teensy instead.
-
-
-
-Keymap
-------
-To create your own keymap copy existent keymap file to `keymap_name.c` and edit it.
-
-
-
-Debug
------
-You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. The converter has some functions for debug, press `<Magic>+H` simultaneously to get help.
-
-- Magic combo: `Shift+Option+⌘` or `Shift+Option+Ctrl`(`Shift+Alt+Gui` or `Shift+Alt+Control`)