diff options
Diffstat (limited to 'LUFA/Build')
36 files changed, 2525 insertions, 0 deletions
diff --git a/LUFA/Build/DMBS/.gitignore b/LUFA/Build/DMBS/.gitignore new file mode 100644 index 0000000000..938768908a --- /dev/null +++ b/LUFA/Build/DMBS/.gitignore @@ -0,0 +1,9 @@ +*.lss +*.bin +*.elf +*.hex +*.eep +*.map +*.o +*.d +*.sym diff --git a/LUFA/Build/DMBS/DMBS/HID_EEPROM_Loader/HID_EEPROM_Loader.c b/LUFA/Build/DMBS/DMBS/HID_EEPROM_Loader/HID_EEPROM_Loader.c new file mode 100644 index 0000000000..35ea2d79b7 --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/HID_EEPROM_Loader/HID_EEPROM_Loader.c @@ -0,0 +1,39 @@ +/* + DMBS Build System + Released into the public domain. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com + */ + +/** \file + * + * Special application to extract an EEPROM image stored in FLASH memory, and + * copy it to the device EEPROM. This application is designed to be used with + * the HID build system module of DMBS to program the EEPROM of a target device + * that uses the HID bootloader protocol, which does not have native EEPROM + * programming support. + */ + +#include <avr/io.h> +#include <avr/eeprom.h> +#include <avr/pgmspace.h> + +/* References to the binary EEPROM data linked in the AVR's FLASH memory space */ +extern const char _binary_InputEEData_bin_start[]; +extern const char _binary_InputEEData_bin_end[]; +extern const char _binary_InputEEData_bin_size[]; + +/* Friendly names for the embedded binary data stored in FLASH memory space */ +#define InputEEData _binary_InputEEData_bin_start +#define InputEEData_size ((int)_binary_InputEEData_bin_size) + +int main(void) +{ + /* Copy out the embedded EEPROM data from FLASH to EEPROM memory space */ + for (uint16_t i = 0; i < InputEEData_size; i++) + eeprom_update_byte((uint8_t*)i, pgm_read_byte(&InputEEData[i])); + + /* Infinite loop once complete */ + for (;;); +} diff --git a/LUFA/Build/DMBS/DMBS/HID_EEPROM_Loader/makefile b/LUFA/Build/DMBS/DMBS/HID_EEPROM_Loader/makefile new file mode 100644 index 0000000000..879eda8cf2 --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/HID_EEPROM_Loader/makefile @@ -0,0 +1,35 @@ +# +# DMBS Build System +# Released into the public domain. +# +# dean [at] fourwalledcubicle [dot] com +# www.fourwalledcubicle.com +# + +# Run "make help" for target help. + +MCU = atmega128 +ARCH = AVR8 +F_CPU = 1000000 +OPTIMIZATION = s +TARGET = HID_EEPROM_Loader +SRC = $(TARGET).c +CC_FLAGS = +LD_FLAGS = +OBJECT_FILES = InputEEData.o + +# Default target +all: + +# Determine the AVR sub-architecture of the build main application object file +FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1) + +# Create a linkable object file with the input binary EEPROM data stored in the FLASH section +InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST) + @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\" + avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@ + +# Include LUFA build script makefiles +include ../core.mk +include ../gcc.mk +include ../hid.mk diff --git a/LUFA/Build/DMBS/DMBS/License.txt b/LUFA/Build/DMBS/DMBS/License.txt new file mode 100644 index 0000000000..322c7624e5 --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/License.txt @@ -0,0 +1,32 @@ + DMBS Build System + Released into the public domain. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com + + + +This is free and unencumbered software released into the public domain. + +Anyone is free to copy, modify, publish, use, compile, sell, or +distribute this software, either in source code form or as a compiled +binary, for any purpose, commercial or non-commercial, and by any +means. + +In jurisdictions that recognize copyright laws, the author or authors +of this software dedicate any and all copyright interest in the +software to the public domain. We make this dedication for the benefit +of the public at large and to the detriment of our heirs and +successors. We intend this dedication to be an overt act of +relinquishment in perpetuity of all present and future rights to this +software under copyright law. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR +OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +OTHER DEALINGS IN THE SOFTWARE. + +For more information, please refer to <http://unlicense.org/> diff --git a/LUFA/Build/DMBS/DMBS/ModulesOverview.md b/LUFA/Build/DMBS/DMBS/ModulesOverview.md new file mode 100644 index 0000000000..1fd9cc11cc --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/ModulesOverview.md @@ -0,0 +1,38 @@ +DMBS - Dean's Makefile Build System +=================================== + + +Modules Overview +---------------- + +The following modules are currently included: + + - [ATPROGRAM](atprogram.md) - Device Programming + - [AVRDUDE](avrdude.md) - Device Programming + - [CORE](core.md) - DMBS Core Functionality + - [CPPCHECK](cppcheck.md) - Static Code Analysis + - [DFU](dfu.md) - Device Programming + - [DOXYGEN](doxygen.md) - Automated Source Code Documentation + - [GCC](gcc.md) - Compiling/Assembling/Linking with GCC + - [HID](hid.md) - Device Programming + +## Importing modules into your project makefile + +To use a module, it is recommended to add the following boilerplate to your +makefile: + + # Include DMBS build script makefiles + DMBS_PATH ?= ../DMBS + +Which can then used to indicate the location of your DMBS installation, relative +to the current directory, when importing modules. For example: + + DMBS_PATH ?= ../DMBS + include $(DMBS_PATH)/core.mk + include $(DMBS_PATH)/gcc.mk + +Imports the `CORE` and `GCC` modules from DMBS using a single path relative to +your project's makefile. + +If you wish to write your own DMBS module(s), +[see the documentation here for more details.](WritingYourOwnModules.md) diff --git a/LUFA/Build/DMBS/DMBS/WritingYourOwnModules.md b/LUFA/Build/DMBS/DMBS/WritingYourOwnModules.md new file mode 100644 index 0000000000..16df7a53bb --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/WritingYourOwnModules.md @@ -0,0 +1,95 @@ +DMBS - Dean's Makefile Build System +=================================== + + +Writing Your Own Modules +------------------------ + +A DMBS module consists of the several boilerplate sections, explained below. + +## The DMBS module hooks + +Your module needs to advertise to DMBS its name, its makefile targets, the +required and optional variables, and the variables and macros the module +provides for use elsewhere. This is achieved with the following section: + + DMBS_BUILD_MODULES += EXAMPLE + DMBS_BUILD_TARGETS += example-target another-target + DMBS_BUILD_MANDATORY_VARS += MANDATORY_NAME ALSO_MANDATORY + DMBS_BUILD_OPTIONAL_VARS += OPTIONAL_NAME ALSO_OPTIONAL + DMBS_BUILD_PROVIDED_VARS += MEANING_OF_LIFE + DMBS_BUILD_PROVIDED_MACROS += STRIP_WHITESPACE + +The example above declares that this module is called `EXAMPLE`, and exposes the +listed targets, variable requirements and provides variables and macros. + +Your module name and provided variable/macro names must be unique, however you +can (and should) re-use variable names where appropriate if they apply to +several modules (such as `ARCH` to specify the project's microcontroller +architecture). Re-using targets is not recommended, but can be used to extend +the dependencies of another module's targets. + +## Importing the CORE module + +Next, your module should always import the DMBS `CORE` module, via the +following: + + # Conditionally import the CORE module of DMBS if it is not already imported + DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) + ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) + include $(DMBS_MODULE_PATH)/core.mk + endif + +This ensures that the `make help` target is always available. In addition, the +`CORE` module exposes some [commonly used macros and variables](core.md) to +your module. + +## Setting optional variable's defaults + +If a variable is optional, you should provide a default value. Do this via the +`?=` operator of `make`, which sets a variable's value if it has not yet been +set: + + MY_OPTIONAL_VARIABLE ?= some_default_value + +## Sanity checking user input + +Sanity checks are what make DMBS useful. Where possible, validate user input and +convert generated errors to human-friendly messages. This can be achieved by +enforcing that all the declared module mandatory variables have been set by the +user: + + # Sanity-check values of mandatory user-supplied variables + $(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) + +As well as complaining if they are set, but currently empty: + + $(call ERROR_IF_EMPTY, SOME_MANDATORY_VARIABLE) + $(call ERROR_IF_EMPTY, SOME_OPTIONAL_BUT_NON_EMPTY_VARIABLE) + +Or even if they are boolean (`Y` or `N`) variables that have an invalid value: + + $(call ERROR_IF_NONBOOL, SOME_BOOL_VARIABLE) + +## Adding targets + +The meat of a DMBS module is the targets, which are run when the user types +`make {target name}` from the command line. These can be as complex or simple +as you like. See the GNU make manual for information on writing make targets. + + example-target: + echo "Your DMBS module works!" + +## And finally, list the PHONYs + +Important in GNU Make is the concept of phony targets; this special directive +tells make that a given target should never be considered a valid file. Listing +phonies ensures that, for example, if your module had a target called `build`, +it would always run when the user types `make build` from the command line, even +if a file called `build` existed in the user project folder. + +You can list module-internal targets here, as well as mark all public targets +via the module header's `DMBS_BUILD_TARGETS` variable. + + # Phony build targets for this module + .PHONY: $(DMBS_BUILD_TARGETS) some-module-internal-target another-internal-target diff --git a/LUFA/Build/DMBS/DMBS/atprogram.md b/LUFA/Build/DMBS/DMBS/atprogram.md new file mode 100644 index 0000000000..ea1b0d9194 --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/atprogram.md @@ -0,0 +1,119 @@ +DMBS - Dean's Makefile Build System +=================================== + + +Module: ATPROGRAM +----------------- + +The ATPROGRAM module provides build targets for use with the official +`ATPROGRAM` back-end utility distributed with the free +[Atmel Studio](http://www.atmel.com) software released by Atmel. + +## Importing This Module into a Makefile: + +To use this module in your application makefile, add the following code to your +makefile: + + include $(DMBS_PATH)/atprogram.mk + +## Prerequisites: + +This module requires the `atprogram.exe` utility to be available in your +system's `PATH` variable. The `atprogram.exe` utility is distributed in Atmel +Studio (usually) inside the application install folder's `atbackend` +subdirectory. + +## Build Targets: + +The following targets are supported by this module: + +<table> + <tbody> + <tr> + <td>atprogram</td> + <td>Program the device FLASH memory with the application's executable data.</td> + </tr> + <tr> + <td>atprogram-ee</td> + <td>Program the device EEPROM memory with the application's EEPROM data.</td> + </tr> + </tbody> +</table> + +## Mandatory Variables: + +The following variables must be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile to be able to use this module: + +<table> + <tbody> + <tr> + <td>MCU</td> + <td>Name of the Atmel processor model (e.g. `at90usb1287`).</td> + </tr> + <tr> + <td>TARGET</td> + <td>Name of the application output file prefix (e.g. `TestApplication`).</td> + </tr> + </tbody> +</table> + +## Optional Variables: + +The following variables may be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile. If not specified, a default value will +be assumed. + +<table> + <tbody> + <tr> + <td>ATPROGRAM_PROGRAMMER</td> + <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. `jtagice3`). Default is `atmelice`.</td> + </tr> + <tr> + <td>ATPROGRAM_INTERFACE</td> + <td>Name of the programming interface to use when programming the target (e.g. `spi`). Default is `jtag`.</td> + </tr> + <tr> + <td>ATPROGRAM_PORT</td> + <td>Name of the communication port to use when when programming with a serially connected tool (e.g. `COM2`). Default is `usb`.</td> + </tr> + </tbody> +</table> + +## Provided Variables: + +The following variables may be referenced in a user makefile (via `$(NAME)` +syntax) if desired, as they are provided by this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no variables.</td> + </tr> + </tbody> +</table> + +## Provided Macros: + +The following macros may be referenced in a user makefile (via +`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by +this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no macros.</td> + </tr> + </tbody> +</table> + +## Module Changelog: + +The changes to this module since its initial release are listed below, as of the +DMBS version where the change was made. + +### 20160403 +Initial release. diff --git a/LUFA/Build/DMBS/DMBS/atprogram.mk b/LUFA/Build/DMBS/DMBS/atprogram.mk new file mode 100644 index 0000000000..a505275aed --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/atprogram.mk @@ -0,0 +1,68 @@ +# +# DMBS Build System +# Released into the public domain. +# +# dean [at] fourwalledcubicle [dot] com +# www.fourwalledcubicle.com +# + +DMBS_BUILD_MODULES += ATPROGRAM +DMBS_BUILD_TARGETS += atprogram atprogram-ee +DMBS_BUILD_MANDATORY_VARS += MCU TARGET +DMBS_BUILD_OPTIONAL_VARS += ATPROGRAM_PROGRAMMER ATPROGRAM_INTERFACE ATPROGRAM_PORT +DMBS_BUILD_PROVIDED_VARS += +DMBS_BUILD_PROVIDED_MACROS += + +# Conditionally import the CORE module of DMBS if it is not already imported +DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) +ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) + include $(DMBS_MODULE_PATH)/core.mk +endif + +# Default values of optionally user-supplied variables +ATPROGRAM_PROGRAMMER ?= atmelice +ATPROGRAM_INTERFACE ?= jtag +ATPROGRAM_PORT ?= + +# Sanity check user supplied values +$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) +$(call ERROR_IF_EMPTY, MCU) +$(call ERROR_IF_EMPTY, TARGET) +$(call ERROR_IF_EMPTY, ATPROGRAM_PROGRAMMER) +$(call ERROR_IF_EMPTY, ATPROGRAM_INTERFACE) + +# Output Messages +MSG_ATPROGRAM_CMD := ' [ATPRGRM] :' + +# Construct base atprogram command flags +BASE_ATPROGRAM_FLAGS := --tool $(ATPROGRAM_PROGRAMMER) --interface $(ATPROGRAM_INTERFACE) --device $(MCU) +ifneq ($(ATPROGRAM_PORT),) + BASE_ATPROGRAM_FLAGS += --port $(ATPROGRAM_PORT) +endif + +# Construct the flags to use for the various memory spaces +ifeq ($(ARCH), AVR8) + ATPROGRAM_FLASH_FLAGS := --chiperase --flash + ATPROGRAM_EEPROM_FLAGS := --eeprom +else ifeq ($(ARCH), XMEGA) + ATPROGRAM_FLASH_FLAGS := --erase --flash + ATPROGRAM_EEPROM_FLAGS := --eeprom +else ifeq ($(ARCH), UC3) + ATPROGRAM_FLASH_FLAGS := --erase + ATPROGRAM_EEPROM_FLAGS := --eeprom +else + $(error Unsupported architecture "$(ARCH)") +endif + +# Programs in the target FLASH memory using ATPROGRAM +atprogram: $(TARGET).elf $(MAKEFILE_LIST) + @echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" FLASH using \"$(ATPROGRAM_PROGRAMMER)\" + atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_FLASH_FLAGS) --file $< + +# Programs in the target EEPROM memory using ATPROGRAM +atprogram-ee: $(TARGET).elf $(MAKEFILE_LIST) + @echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" EEPROM using \"$(ATPROGRAM_PROGRAMMER)\" + atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_EEPROM_FLAGS) --file $< + +# Phony build targets for this module +.PHONY: $(DMBS_BUILD_TARGETS) diff --git a/LUFA/Build/DMBS/DMBS/avrdude.md b/LUFA/Build/DMBS/DMBS/avrdude.md new file mode 100644 index 0000000000..d6c71ce6db --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/avrdude.md @@ -0,0 +1,124 @@ +DMBS - Dean's Makefile Build System +=================================== + + +Module: AVRDUDE +----------------- + +The AVRDUDE module provides build targets for use with the official +open source `AVRDUDE` programmer utility, for the reprogramming of Atmel devices +using a wide variety of official and non-official programming devices and +bootloaders. + +## Importing This Module into a Makefile: + +To use this module in your application makefile, add the following code to your +makefile: + + include $(DMBS_PATH)/avrdude.mk + +## Prerequisites: + +This module requires the `avrdude` utility to be available in your +system's `PATH` variable. The `avrdude` utility is distributed on the project's +[official site](https://savannah.nongnu.org/projects/avrdude) but is also +made available in many *nix operating system's package managers. + +## Build Targets: + +The following targets are supported by this module: + +<table> + <tbody> + <tr> + <td>avrdude</td> + <td>Program the device FLASH memory with the application's executable data.</td> + </tr> + <tr> + <td>avrdude-ee</td> + <td>Program the device EEPROM memory with the application's EEPROM data.</td> + </tr> + </tbody> +</table> + +## Mandatory Variables: + +The following variables must be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile to be able to use this module: + +<table> + <tbody> + <tr> + <td>MCU</td> + <td>Name of the Atmel processor model (e.g. `at90usb1287`).</td> + </tr> + <tr> + <td>TARGET</td> + <td>Name of the application output file prefix (e.g. `TestApplication`).</td> + </tr> + </tbody> +</table> + +## Optional Variables: + +The following variables may be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile. If not specified, a default value will +be assumed. + +<table> + <tbody> + <tr> + <td>AVRDUDE_PROGRAMMER</td> + <td>Name of the programmer/debugger tool or bootloader to communicate with (e.g. `jtagicemkii`). Default is `jtagicemkii`.</td> + </tr> + <tr> + <td>AVRDUDE_PORT</td> + <td>Name of the communication port to use when when programming with a serially connected tool (e.g. `COM2`). Default is `usb`.</td> + </tr> + <tr> + <td>AVRDUDE_FLAGS</td> + <td>Additional flags to pass to `avrdude` when invoking the tool. Default is empty (no additional flags).</td> + </tr> + <tr> + <td>AVRDUDE_MEMORY</td> + <td>Memory space to program when executing the `avrdude` target (e.g. 'application` for an XMEGA device). Default is `flash`.</td> + </tr> + </tbody> +</table> + +## Provided Variables: + +The following variables may be referenced in a user makefile (via `$(NAME)` +syntax) if desired, as they are provided by this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no variables.</td> + </tr> + </tbody> +</table> + +## Provided Macros: + +The following macros may be referenced in a user makefile (via +`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by +this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no macros.</td> + </tr> + </tbody> +</table> + +## Module Changelog: + +The changes to this module since its initial release are listed below, as of the +DMBS version where the change was made. + +### 20160403 +Initial release. diff --git a/LUFA/Build/DMBS/DMBS/avrdude.mk b/LUFA/Build/DMBS/DMBS/avrdude.mk new file mode 100644 index 0000000000..c4bac8fd0e --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/avrdude.mk @@ -0,0 +1,52 @@ +# +# DMBS Build System +# Released into the public domain. +# +# dean [at] fourwalledcubicle [dot] com +# www.fourwalledcubicle.com +# + +DMBS_BUILD_MODULES += AVRDUDE +DMBS_BUILD_TARGETS += avrdude avrdude-ee +DMBS_BUILD_MANDATORY_VARS += MCU TARGET +DMBS_BUILD_OPTIONAL_VARS += AVRDUDE_PROGRAMMER AVRDUDE_PORT AVRDUDE_FLAGS AVRDUDE_MEMORY +DMBS_BUILD_PROVIDED_VARS += +DMBS_BUILD_PROVIDED_MACROS += + +# Conditionally import the CORE module of DMBS if it is not already imported +DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) +ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) + include $(DMBS_MODULE_PATH)/core.mk +endif + +# Default values of optionally user-supplied variables +AVRDUDE_PROGRAMMER ?= jtagicemkii +AVRDUDE_PORT ?= usb +AVRDUDE_FLAGS ?= +AVRDUDE_MEMORY ?= flash + +# Sanity check user supplied values +$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) +$(call ERROR_IF_EMPTY, MCU) +$(call ERROR_IF_EMPTY, TARGET) +$(call ERROR_IF_EMPTY, AVRDUDE_PROGRAMMER) +$(call ERROR_IF_EMPTY, AVRDUDE_PORT) + +# Output Messages +MSG_AVRDUDE_CMD := ' [AVRDUDE] :' + +# Construct base avrdude command flags +BASE_AVRDUDE_FLAGS := -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) + +# Programs in the target FLASH memory using AVRDUDE +avrdude: $(TARGET).hex $(MAKEFILE_LIST) + @echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" FLASH using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\" + avrdude $(BASE_AVRDUDE_FLAGS) -U $(AVRDUDE_MEMORY):w:$< $(AVRDUDE_FLAGS) + +# Programs in the target EEPROM memory using AVRDUDE +avrdude-ee: $(TARGET).eep $(MAKEFILE_LIST) + @echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" EEPROM using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\" + avrdude $(BASE_AVRDUDE_FLAGS) -U eeprom:w:$< $(AVRDUDE_FLAGS) + +# Phony build targets for this module +.PHONY: $(DMBS_BUILD_TARGETS) diff --git a/LUFA/Build/DMBS/DMBS/core.md b/LUFA/Build/DMBS/DMBS/core.md new file mode 100644 index 0000000000..406abfecd7 --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/core.md @@ -0,0 +1,136 @@ +DMBS - Dean's Makefile Build System +=================================== + + +Module: CORE +------------ + +The CORE module provides the core DMBS infrastructure used by other DMBS +modules, and must always be imported. Additionally, this module provides the +help system for DMBS. + +## Importing This Module into a Makefile: + +To use this module in your application makefile, add the following code to your +makefile: + + include $(DMBS_PATH)/core.mk + +## Prerequisites: + +None. + +## Build Targets: + +The following targets are supported by this module: + +<table> + <tbody> + <tr> + <td>help</td> + <td>Show help for the current project, including a list of all available targets, variables and macros from the imported modules.</td> + </tr> + <tr> + <td>list_targets</td> + <td>Show a list of all build targets from the imported modules.</td> + </tr> + <tr> + <td>list_modules</td> + <td>Show a list of all imported modules.</td> + </tr> + <tr> + <td>list_mandatory</td> + <td>Show a list of all mandatory variables from the imported modules.</td> + </tr> + <tr> + <td>list_optional</td> + <td>Show a list of all optional variables from the imported modules.</td> + </tr> + <tr> + <td>list_provided</td> + <td>Show a list of all variables provided by the imported modules.</td> + </tr> + <tr> + <td>list_macros</td> + <td>Show a list of all macros provided by the imported modules.</td> + </tr> + </tbody> +</table> + +## Mandatory Variables: + +The following variables must be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile to be able to use this module: + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module has no mandatory variables.</td> + </tr> + </tbody> +</table> + +## Optional Variables: + +The following variables may be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile. If not specified, a default value will +be assumed. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module has no optional variables.</td> + </tr> + </tbody> +</table> + +## Provided Variables: + +The following variables may be referenced in a user makefile (via `$(NAME)` +syntax) if desired, as they are provided by this module. + +<table> + <tbody> + <tr> + <td>DMBS_VERSION</td> + <td>Current version of this DMBS release, as a ISO 8601 integer (such as `20160403` for `2016-04-03`).</td> + </tr> + </tbody> +</table> + +## Provided Macros: + +The following macros may be referenced in a user makefile (via +`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by +this module. + +<table> + <tbody> + <tr> + <td>DMBS_CHECK_VERSION</td> + <td>Macro to check the current DMBS version against the first argument and abort if the required version is newer than the current version.</td> + </tr> + <tr> + <td>ERROR_IF_UNSET</td> + <td>Macro to check the given makefile variable name passed as the first argument, and abort if it has not been set by any makefile module.</td> + </tr> + <tr> + <td>ERROR_IF_EMPTY</td> + <td>Macro to check the given makefile variable name passed as the first argument, and abort if it has an empty value.</td> + </tr> + <tr> + <td>ERROR_IF_NONBOOL</td> + <td>Macro to check the given makefile variable name passed as the first argument, and abort if it has a value other than `Y` or `N`.</td> + </tr> + </tbody> +</table> + +## Module Changelog: + +The changes to this module since its initial release are listed below, as of the +DMBS version where the change was made. + +### 20160403 +Initial release. diff --git a/LUFA/Build/DMBS/DMBS/core.mk b/LUFA/Build/DMBS/DMBS/core.mk new file mode 100644 index 0000000000..1edbd178c1 --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/core.mk @@ -0,0 +1,147 @@ +# +# DMBS Build System +# Released into the public domain. +# +# dean [at] fourwalledcubicle [dot] com +# www.fourwalledcubicle.com +# + +DMBS_BUILD_MODULES += CORE +DMBS_BUILD_TARGETS += help list_targets list_modules list_mandatory list_optional list_provided list_macros +DMBS_BUILD_MANDATORY_VARS += +DMBS_BUILD_OPTIONAL_VARS += +DMBS_BUILD_PROVIDED_VARS += DMBS_VERSION +DMBS_BUILD_PROVIDED_MACROS += DMBS_CHECK_VERSION ERROR_IF_UNSET ERROR_IF_EMPTY ERROR_IF_NONBOOL + +SHELL = /bin/sh + +# Current DMBS release version +DMBS_VERSION := 20170426 + +# Macro to check the DMBS version, aborts if the given DMBS version is below the current version +DMBS_CHECK_VERSION ?= $(if $(filter-out 0, $(shell test $(DMBS_VERSION) -lt $(1); echo $$?)), , $(error DMBS version $(1) or newer required, current version is $(DMBS_VERSION))) + +# Macros to use in other modules to check various conditions +ERROR_IF_UNSET ?= $(if $(filter undefined, $(origin $(strip $(1)))), $(error Makefile $(strip $(1)) value not set)) +ERROR_IF_EMPTY ?= $(if $(strip $($(strip $(1)))), , $(error Makefile $(strip $(1)) option cannot be blank)) +ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(strip $(1)) option must be Y or N)) + +# Converts a given input to a printable output using "(None)" if no items are in the list +CONVERT_TO_PRINTABLE = $(if $(strip $(1)), $(1), (None)) + +# Build sorted and filtered lists of the included build module data +SORTED_DMBS_BUILD_MODULES = $(sort $(DMBS_BUILD_MODULES)) +SORTED_DMBS_BUILD_TARGETS = $(sort $(DMBS_BUILD_TARGETS)) +SORTED_DMBS_MANDATORY_VARS = $(sort $(DMBS_BUILD_MANDATORY_VARS)) +SORTED_DMBS_OPTIONAL_VARS = $(filter-out $(SORTED_DMBS_MANDATORY_VARS), $(sort $(DMBS_BUILD_OPTIONAL_VARS))) +SORTED_DMBS_PROVIDED_VARS = $(sort $(DMBS_BUILD_PROVIDED_VARS)) +SORTED_DMBS_PROVIDED_MACROS = $(sort $(DMBS_BUILD_PROVIDED_MACROS)) + +# Create printable versions of the sorted build module data (use "(None)" when no data is available) +PRINTABLE_DMBS_BUILD_MODULES = $(call CONVERT_TO_PRINTABLE, $(SORTED_DMBS_BUILD_MODULES)) +PRINTABLE_DMBS_BUILD_TARGETS = $(call CONVERT_TO_PRINTABLE, $(SORTED_DMBS_BUILD_TARGETS)) +PRINTABLE_DMBS_MANDATORY_VARS = $(call CONVERT_TO_PRINTABLE, $(SORTED_DMBS_MANDATORY_VARS)) +PRINTABLE_DMBS_OPTIONAL_VARS = $(call CONVERT_TO_PRINTABLE, $(SORTED_DMBS_OPTIONAL_VARS)) +PRINTABLE_DMBS_PROVIDED_VARS = $(call CONVERT_TO_PRINTABLE, $(SORTED_DMBS_PROVIDED_VARS)) +PRINTABLE_DMBS_PROVIDED_MACROS = $(call CONVERT_TO_PRINTABLE, $(SORTED_DMBS_PROVIDED_MACROS)) + +help: + @echo "===================================================================" + @echo " The DMBS Build System " + @echo " By Dean Camera { dean @ fourwalledcubicle . com } " + @echo "===================================================================" + @echo "DESCRIPTION: " + @echo " This build system is a set of makefile modules for (GNU) Make, to " + @echo " provide a simple system for building DMBS powered applications. " + @echo " Each makefile module can be included from within a user makefile, " + @echo " to expose the build rules documented in the comments at the top of" + @echo " each build module. " + @echo " " + @echo "USAGE: " + @echo " To execute a rule, define all variables indicated in the desired " + @echo " module as a required parameter before including the build module " + @echo " in your project makefile. Parameters marked as optional will " + @echo " assume a default value in the modules if not user-assigned. " + @echo " " + @echo " By default the target output shows both a friendly summary, as " + @echo " well as the actual invoked command. To suppress the output of the " + @echo " invoked commands and show only the friendly command output, run " + @echo " make with the \"-s\" switch added before the target(s). " + @echo "===================================================================" + @echo " " + @echo " Currently used build system modules in this application: " + @echo " " + @printf " %b" "$(PRINTABLE_DMBS_BUILD_MODULES:%= - %\n)" + @echo " " + @echo " " + @echo " Currently available build targets in this application: " + @echo " " + @printf " %b" "$(PRINTABLE_DMBS_BUILD_TARGETS:%= - %\n)" + @echo " " + @echo " " + @echo " Mandatory variables required by the selected build Modules: " + @echo " " + @printf " %b" "$(PRINTABLE_DMBS_MANDATORY_VARS:%= - %\n)" + @echo " " + @echo " " + @echo " Optional variables required by the selected build Modules: " + @echo " " + @printf " %b" "$(PRINTABLE_DMBS_OPTIONAL_VARS:%= - %\n)" + @echo " " + @echo " " + @echo " Variables provided by the selected build Modules: " + @echo " " + @printf " %b" "$(PRINTABLE_DMBS_PROVIDED_VARS:%= - %\n)" + @echo " " + @echo " " + @echo " Macros provided by the selected build Modules: " + @echo " " + @printf " %b" "$(PRINTABLE_DMBS_PROVIDED_MACROS:%= - %\n)" + @echo " " + @echo "===================================================================" + @echo " The DMBS Build System $(DMBS_VERSION) - Making MAKE easier." + @echo "===================================================================" + +# Lists build modules included by the project makefile, in alphabetical order +list_modules: + @echo Currently Used Build System Modules: + @printf " %b" "$(PRINTABLE_DMBS_BUILD_MODULES:%= - %\n)" + +# Lists build targets included by the project makefile, in alphabetical order +list_targets: + @echo Currently Available Build Targets: + @printf " %b" "$(PRINTABLE_DMBS_BUILD_TARGETS:%= - %\n)" + +# Lists mandatory variables that must be set by the project makefile, in alphabetical order +list_mandatory: + @echo Mandatory Variables for Included Modules: + @printf " %b" "$(PRINTABLE_DMBS_MANDATORY_VARS:%= - %\n)" + +# Lists optional variables that must be set by the project makefile, in alphabetical order +list_optional: + @echo Optional Variables for Included Modules: + @printf " %b" "$(PRINTABLE_DMBS_OPTIONAL_VARS:%= - %\n)" + +# Lists variables provided by the included build modules, in alphabetical order +list_provided: + @echo Variables Provided by the Included Modules: + @printf " %b" "$(PRINTABLE_DMBS_PROVIDED_VARS:%= - %\n)" + +# Lists macros provided by the included build modules, in alphabetical order +list_macros: + @echo Macros Provided by the Included Modules: + @printf " %b" "$(PRINTABLE_DMBS_PROVIDED_MACROS:%= - %\n)" + +# Debugging; "make print-VARNAME" will output the variable VARNAME's value +print-%: + @printf "%s = %s" $(@:print-%=%) $($(@:print-%=%)) + +# Disable default in-built make rules (those that are needed are explicitly +# defined, and doing so has performance benefits when recursively building) +ifeq ($(filter -r,$(MAKEFLAGS)),) + MAKEFLAGS += -r +endif +.SUFFIXES: + +# Phony build targets for this module +.PHONY: $(DMBS_BUILD_TARGETS) diff --git a/LUFA/Build/DMBS/DMBS/cppcheck.md b/LUFA/Build/DMBS/DMBS/cppcheck.md new file mode 100644 index 0000000000..ec0e38d020 --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/cppcheck.md @@ -0,0 +1,134 @@ +DMBS - Dean's Makefile Build System +=================================== + + +Module: CPPCHECK +----------------- + +The CPPCHECK module provides build targets to perform static analysis of the +user application, using the open source `cppcheck` tool. + +## Importing This Module into a Makefile: + +To use this module in your application makefile, add the following code to your +makefile: + + include $(DMBS_PATH)/cppcheck.mk + +## Prerequisites: + +This module requires the `cppcheck` utility to be available in your system's +`PATH` variable. The `cppcheck` utility is distributed on the project's +[official site](http://cppcheck.sourceforge.net/) but is also +made available in many *nix operating system's package managers. + +## Build Targets: + +The following targets are supported by this module: + +<table> + <tbody> + <tr> + <td>cppcheck</td> + <td>Scan the project with CPPCHECK, and show all discovered issues.</td> + </tr> + <tr> + <td>cppcheck-config</td> + <td>Check the project with CPPCHECK, to find missing header paths.</td> + </tr> + </tbody> +</table> + +## Mandatory Variables: + +The following variables must be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile to be able to use this module: + +<table> + <tbody> + <tr> + <td>SRC</td> + <td>List of all project source files to scan.</td> + </tr> + </tbody> +</table> + +## Optional Variables: + +The following variables may be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile. If not specified, a default value will +be assumed. + +<table> + <tbody> + <tr> + <td>CPPCHECK_INCLUDES</td> + <td>Extra include paths to search, for any missing header files. Default is empty (no additional paths).</td> + </tr> + <tr> + <td>CPPCHECK_EXCLUDES</td> + <td>List of source files, file paths or path fragments to exclude from the scan. Default is empty (no exclusions).</td> + </tr> + <tr> + <td>CPPCHECK_MSG_TEMPLATE</td> + <td>Template for error and warning message output. Default is `{file}:{line}: {severity} ({id}): {message}`.</td> + </tr> + <tr> + <td>CPPCHECK_ENABLE</td> + <td>List of CPPCHECK checks to enable. Default is `all`.</td> + </tr> + <tr> + <td>CPPCHECK_SUPPRESS</td> + <td>List of CPPCHECK checks to ignore. Default is `variableScope missingInclude`.</td> + </tr> + <tr> + <td>CPPCHECK_FAIL_ON_WARNING</td> + <td>Boolean, if `Y` the build will fail if CPPCHECK discovers any errors or warnings. If `N`, fail only on errors. Default is `Y`.</td> + </tr> + <tr> + <td>CPPCHECK_QUIET</td> + <td>Boolean, if `Y` CPPCHECK will suppress all output except for discovered errors or warnings. If `N`, scan progress will be emitted. Default is `Y`.</td> + </tr> + <tr> + <td>CPPCHECK_FLAGS_</td> + <td>Additional flags to pass to CPPCHECK when scans are started. Default is empty (no additional flags).</td> + </tr> + </tbody> +</table> + +## Provided Variables: + +The following variables may be referenced in a user makefile (via `$(NAME)` +syntax) if desired, as they are provided by this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no variables.</td> + </tr> + </tbody> +</table> + +## Provided Macros: + +The following macros may be referenced in a user makefile (via +`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by +this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no macros.</td> + </tr> + </tbody> +</table> + +## Module Changelog: + +The changes to this module since its initial release are listed below, as of the +DMBS version where the change was made. + +### 20160403 +Initial release. diff --git a/LUFA/Build/DMBS/DMBS/cppcheck.mk b/LUFA/Build/DMBS/DMBS/cppcheck.mk new file mode 100644 index 0000000000..9b82fc3b08 --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/cppcheck.mk @@ -0,0 +1,66 @@ +# +# DMBS Build System +# Released into the public domain. +# +# dean [at] fourwalledcubicle [dot] com +# www.fourwalledcubicle.com +# + +DMBS_BUILD_MODULES += CPPCHECK +DMBS_BUILD_TARGETS += cppcheck cppcheck-config +DMBS_BUILD_MANDATORY_VARS += SRC +DMBS_BUILD_OPTIONAL_VARS += CPPCHECK_INCLUDES CPPCHECK_EXCLUDES CPPCHECK_MSG_TEMPLATE CPPCHECK_ENABLE \ + CPPCHECK_SUPPRESS CPPCHECK_FAIL_ON_WARNING CPPCHECK_QUIET CPPCHECK_FLAGS +DMBS_BUILD_PROVIDED_VARS += +DMBS_BUILD_PROVIDED_MACROS += + +# Conditionally import the CORE module of DMBS if it is not already imported +DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) +ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) + include $(DMBS_MODULE_PATH)/core.mk +endif + +# Default values of optionally user-supplied variables +CPPCHECK_INCLUDES ?= +CPPCHECK_EXCLUDES ?= +CPPCHECK_MSG_TEMPLATE ?= {file}:{line}: {severity} ({id}): {message} +CPPCHECK_ENABLE ?= all +CPPCHECK_SUPPRESS ?= variableScope missingInclude +CPPCHECK_FAIL_ON_WARNING ?= Y +CPPCHECK_QUIET ?= Y +CPPCHECK_FLAGS ?= + +# Sanity check user supplied values +$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) +$(call ERROR_IF_EMPTY, SRC) +$(call ERROR_IF_EMPTY, CPPCHECK_MSG_TEMPLATE) +$(call ERROR_IF_EMPTY, CPPCHECK_ENABLE) +$(call ERROR_IF_NONBOOL, CPPCHECK_FAIL_ON_WARNING) +$(call ERROR_IF_NONBOOL, CPPCHECK_QUIET) + +# Build a default argument list for cppcheck +BASE_CPPCHECK_FLAGS := --template="$(CPPCHECK_MSG_TEMPLATE)" $(CPPCHECK_INCLUDES:%=-I%) $(CPPCHECK_EXCLUDES:%=-i%) --inline-suppr --force --std=c99 + +# Sanity check parameters and construct additional command line arguments to cppcheck +ifeq ($(CPPCHECK_FAIL_ON_WARNING), Y) + BASE_CPPCHECK_FLAGS += --error-exitcode=1 +endif +ifeq ($(CPPCHECK_QUIET), Y) + BASE_CPPCHECK_FLAGS += --quiet +endif + +# Output Messages +MSG_CPPCHECK_CMD := ' [CPPCHECK]:' + +# Checks the CPPCheck configuration as used in the user project, to determine if any paths are missing or invalid +cppcheck-config: $(MAKEFILE_LIST) + @echo $(MSG_CPPCHECK_CMD) Checking cppcheck configuration check on source files + cppcheck $(BASE_CPPCHECK_FLAGS) --check-config $(CPPCHECK_FLAGS) $(SRC) + +# Runs a static analysis using CPPCheck to determine if there are any issues +cppcheck: $(MAKEFILE_LIST) + @echo $(MSG_CPPCHECK_CMD) Performing static analysis on source files + cppcheck $(BASE_CPPCHECK_FLAGS) --enable=$(CPPCHECK_ENABLE) $(CPPCHECK_SUPPRESS:%=--suppress=%) $(CPPCHECK_FLAGS) $(SRC) + +# Phony build targets for this module +.PHONY: $(DMBS_BUILD_TARGETS) diff --git a/LUFA/Build/DMBS/DMBS/dfu.md b/LUFA/Build/DMBS/DMBS/dfu.md new file mode 100644 index 0000000000..456bbf6f5f --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/dfu.md @@ -0,0 +1,122 @@ +DMBS - Dean's Makefile Build System +=================================== + + +Module: DFU +----------------- + +The DFU module provides build targets to program a USB connected target running +a DFU class bootloader, via the official Atmel FLIP utility running via the +command line, or the open source `DFU-Programmer` tool. + +## Importing This Module into a Makefile: + +To use this module in your application makefile, add the following code to your +makefile: + + include $(DMBS_PATH)/dfu.mk + +## Prerequisites: + +This module requires the `batchisp` utility to be available in your system's +`PATH` variable. The `batchisp` utility is distributed as part of Atmel's FLIP +software which can be downloaded from the [official site](http://www.atmel.com). + +This module requires the `dfu-programmer` utility to be available in your +system's `PATH` variable. The `dfu-programmer` utility is distributed from the +[official project site](https://dfu-programmer.github.io/). + +## Build Targets: + +The following targets are supported by this module: + +<table> + <tbody> + <tr> + <td>flip</td> + <td>Program the application into the device's flash memory, using Atmel FLIP.</td> + </tr> + <tr> + <td>flip-ee</td> + <td>Program the application's EEPROM data into the device's EEPROM memory, using Atmel FLIP.</td> + </tr> + <tr> + <td>dfu</td> + <td>Program the application into the device's flash memory, using `dfu-programmer`.</td> + </tr> + <tr> + <td>dfu-ee</td> + <td>Program the application's EEPROM data into the device's EEPROM memory, using `dfu-programmer`.</td> + </tr> + </tbody> +</table> + +## Mandatory Variables: + +The following variables must be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile to be able to use this module: + +<table> + <tbody> + <tr> + <td>MCU</td> + <td>Name of the Atmel processor model (e.g. `at90usb1287`).</td> + </tr> + <tr> + <td>TARGET</td> + <td>Name of the application output file prefix (e.g. `TestApplication`).</td> + </tr> + </tbody> +</table> + +## Optional Variables: + +The following variables may be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile. If not specified, a default value will +be assumed. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module has no optional variables.</td> + </tr> + </tbody> +</table> + +## Provided Variables: + +The following variables may be referenced in a user makefile (via `$(NAME)` +syntax) if desired, as they are provided by this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no variables.</td> + </tr> + </tbody> +</table> + +## Provided Macros: + +The following macros may be referenced in a user makefile (via +`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by +this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no macros.</td> + </tr> + </tbody> +</table> + +## Module Changelog: + +The changes to this module since its initial release are listed below, as of the +DMBS version where the change was made. + +### 20160403 +Initial release. diff --git a/LUFA/Build/DMBS/DMBS/dfu.mk b/LUFA/Build/DMBS/DMBS/dfu.mk new file mode 100644 index 0000000000..1eb22b864f --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/dfu.mk @@ -0,0 +1,62 @@ +# +# DMBS Build System +# Released into the public domain. +# +# dean [at] fourwalledcubicle [dot] com +# www.fourwalledcubicle.com +# + +DMBS_BUILD_MODULES += DFU +DMBS_BUILD_TARGETS += flip flip-ee dfu dfu-ee +DMBS_BUILD_MANDATORY_VARS += MCU TARGET +DMBS_BUILD_OPTIONAL_VARS += +DMBS_BUILD_PROVIDED_VARS += +DMBS_BUILD_PROVIDED_MACROS += + +# Conditionally import the CORE module of DMBS if it is not already imported +DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) +ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) + include $(DMBS_MODULE_PATH)/core.mk +endif + +# Sanity-check values of mandatory user-supplied variables +$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) +$(call ERROR_IF_EMPTY, MCU) +$(call ERROR_IF_EMPTY, TARGET) + +# Output Messages +MSG_COPY_CMD := ' [CP] :' +MSG_REMOVE_CMD := ' [RM] :' +MSG_DFU_CMD := ' [DFU] :' + +# Programs in the target FLASH memory using BATCHISP, the command line tool used by FLIP +flip: $(TARGET).hex $(MAKEFILE_LIST) + @echo $(MSG_DFU_CMD) Programming FLASH with batchisp using \"$<\" + batchisp -hardware usb -device $(MCU) -operation erase f loadbuffer $< program + batchisp -hardware usb -device $(MCU) -operation start reset 0 + +# Programs in the target EEPROM memory using BATCHISP, the command line tool used by FLIP +flip-ee: $(TARGET).eep $(MAKEFILE_LIST) + @echo $(MSG_COPY_CMD) Copying EEP file to temporary file \"$<.hex\" + cp $< $<.hex + @echo $(MSG_DFU_CMD) Programming EEPROM with batchisp using \"$<.hex\" + batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $<.hex program + batchisp -hardware usb -device $(MCU) -operation start reset 0 + @echo $(MSG_REMOVE_CMD) Removing temporary file \"$<.hex\" + rm $<.hex + +# Programs in the target FLASH memory using DFU-PROGRAMMER +dfu: $(TARGET).hex $(MAKEFILE_LIST) + @echo $(MSG_DFU_CMD) Programming FLASH with dfu-programmer using \"$<\" + dfu-programmer $(MCU) erase + dfu-programmer $(MCU) flash $< + dfu-programmer $(MCU) reset + +# Programs in the target EEPROM memory using DFU-PROGRAMMER +dfu-ee: $(TARGET).eep $(MAKEFILE_LIST) + @echo $(MSG_DFU_CMD) Programming EEPROM with dfu-programmer using \"$<\" + dfu-programmer $(MCU) flash --eeprom $< + dfu-programmer $(MCU) reset + +# Phony build targets for this module +.PHONY: $(DMBS_BUILD_TARGETS) diff --git a/LUFA/Build/DMBS/DMBS/doxygen.md b/LUFA/Build/DMBS/DMBS/doxygen.md new file mode 100644 index 0000000000..837704aca0 --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/doxygen.md @@ -0,0 +1,118 @@ +DMBS - Dean's Makefile Build System +=================================== + + +Module: DOXYGEN +----------------- + +The DOXYGEN module provides build targets to automatically generate API +documentation for a project, using the open-source Doxygen tool. + +## Importing This Module into a Makefile: + +To use this module in your application makefile, add the following code to your +makefile: + + include $(DMBS_PATH)/doxygen.mk + +## Prerequisites: + +This module requires the `doxygen` utility to be available in your system's +`PATH` variable. The `doxygen` utility is distributed on the project's +[official site](http://doxygen.org/) but is also +made available in many *nix operating system's package managers. + +## Build Targets: + +The following targets are supported by this module: + +<table> + <tbody> + <tr> + <td>doxygen</td> + <td>Generate project documentation, via Doxygen.</td> + </tr> + <tr> + <td>doxygen-create</td> + <td>Create a new project Doxygen template, which can then be customized.</td> + </tr> + <tr> + <td>doxygen-upgrade</td> + <td>Upgrade an existing project Doxygen template to the latest Doxygen version.</td> + </tr> + </tbody> +</table> + +## Mandatory Variables: + +The following variables must be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile to be able to use this module: + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module has no mandatory variables.</td> + </tr> + </tbody> +</table> + +## Optional Variables: + +The following variables may be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile. If not specified, a default value will +be assumed. + +<table> + <tbody> + <tr> + <td>DOXYGEN_CONF</td> + <td>Name of the Doxygen project configuration file that should be used when generating documentation, or creating/upgrading the configuration file.</td> + </tr> + <tr> + <td>DOXYGEN_FAIL_ON_WARNING</td> + <td>Boolean, if `Y` the build will fail if Doxygen encounters any errors or warnings. If `N`, fail only on errors. Default is `Y`.</td> + </tr> + <tr> + <td>DOXYGEN_OVERRIDE_PARAMS</td> + <td>List of `NAME=VALUE` parameters which should override the values specified in the project configuration file, when building documentation.</td> + </tr> + </tbody> +</table> + +## Provided Variables: + +The following variables may be referenced in a user makefile (via `$(NAME)` +syntax) if desired, as they are provided by this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no variables.</td> + </tr> + </tbody> +</table> + +## Provided Macros: + +The following macros may be referenced in a user makefile (via +`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by +this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no macros.</td> + </tr> + </tbody> +</table> + +## Module Changelog: + +The changes to this module since its initial release are listed below, as of the +DMBS version where the change was made. + +### 20160403 +Initial release. diff --git a/LUFA/Build/DMBS/DMBS/doxygen.mk b/LUFA/Build/DMBS/DMBS/doxygen.mk new file mode 100644 index 0000000000..45639ad156 --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/doxygen.mk @@ -0,0 +1,62 @@ +# +# DMBS Build System +# Released into the public domain. +# +# dean [at] fourwalledcubicle [dot] com +# www.fourwalledcubicle.com +# + +DMBS_BUILD_MODULES += DOXYGEN +DMBS_BUILD_TARGETS += doxygen doxygen-upgrade doxygen-create +DMBS_BUILD_MANDATORY_VARS += +DMBS_BUILD_OPTIONAL_VARS += DOXYGEN_CONF DOXYGEN_FAIL_ON_WARNING DOXYGEN_OVERRIDE_PARAMS +DMBS_BUILD_PROVIDED_VARS += +DMBS_BUILD_PROVIDED_MACROS += + +# Conditionally import the CORE module of DMBS if it is not already imported +DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) +ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) + include $(DMBS_MODULE_PATH)/core.mk +endif + +# Default values of optionally user-supplied variables +DOXYGEN_CONF ?= doxyfile +DOXYGEN_FAIL_ON_WARNING ?= Y +DOXYGEN_OVERRIDE_PARAMS ?= QUIET=YES + +# Sanity check user supplied values +$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) +$(call ERROR_IF_EMPTY, DOXYGEN_CONF) +$(call ERROR_IF_NONBOOL, DOXYGEN_FAIL_ON_WARNING) + +# Output Messages +MSG_DOXYGEN_CMD := ' [DOXYGEN] :' + +# Determine Doxygen invocation command +BASE_DOXYGEN_CMD := ( cat $(DOXYGEN_CONF) $(DOXYGEN_OVERRIDE_PARAMS:%=; echo "%") ) | doxygen - +ifeq ($(DOXYGEN_FAIL_ON_WARNING), Y) + DOXYGEN_CMD := if ( $(BASE_DOXYGEN_CMD) 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then exit 1; fi; +else + DOXYGEN_CMD := $(BASE_DOXYGEN_CMD) +endif + +# Error if the specified Doxygen configuration file does not exist +$(DOXYGEN_CONF): + $(error Doxygen configuration file $@ does not exist) + +# Builds the project documentation using the specified configuration file and the DOXYGEN tool +doxygen: $(DOXYGEN_CONF) $(MAKEFILE_LIST) + @echo $(MSG_DOXYGEN_CMD) Configuration file \"$(DOXYGEN_CONF)\" with parameters \"$(DOXYGEN_OVERRIDE_PARAMS)\" + $(DOXYGEN_CMD) + +# Upgrades an existing Doxygen configuration file to the latest Doxygen template, preserving settings +doxygen-upgrade: $(DOXYGEN_CONF) $(MAKEFILE_LIST) + @echo $(MSG_DOXYGEN_CMD) Upgrading configuration file \"$(DOXYGEN_CONF)\" with latest template + doxygen -u $(DOXYGEN_CONF) > /dev/null + +# Creates a new Doxygen configuration file with the set file name +doxygen-create: $(MAKEFILE_LIST) + @echo $(MSG_DOXYGEN_CMD) Creating new configuration file \"$(DOXYGEN_CONF)\" with latest template + doxygen -g $(DOXYGEN_CONF) > /dev/null + + diff --git a/LUFA/Build/DMBS/DMBS/gcc.md b/LUFA/Build/DMBS/DMBS/gcc.md new file mode 100644 index 0000000000..d28fd9ae45 --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/gcc.md @@ -0,0 +1,211 @@ +DMBS - Dean's Makefile Build System +=================================== + + +Module: GCC +----------------- + +The GCC module provides build targets to compile a user application, using a +variant of GCC for a specific target architecture (such as `avr-gcc`). + +## Importing This Module into a Makefile: + +To use this module in your application makefile, add the following code to your +makefile: + + include $(DMBS_PATH)/gcc.mk + +## Prerequisites: + +This module requires the GCC compiler to be installed and available in the +system's `PATH` variable for the desired target architecture. + +## Build Targets: + +The following targets are supported by this module: + +<table> + <tbody> + <tr> + <td>size</td> + <td>Show the compiled binary size for the various memory segments.</td> + </tr> + <tr> + <td>symbol-sizes</td> + <td>Show the size of each symbol in the compiled binary (useful to find large functions to optimize further).</td> + </tr> + <tr> + <td>all</td> + <td>Build application and generate all binary (BIN, ELF, HEX) and auxiliary (LSS, MAP, SYM, etc.) output files.</td> + </tr> + <tr> + <td>lib</td> + <td>Generate a static `.a` library from the application code, containing the flash region's data.</td> + </tr> + <tr> + <td>elf</td> + <td>Generate an ELF debug file from the application code, containing all region's data.</td> + </tr> + <tr> + <td>bin</td> + <td>Generate a flat BIN binary file from the application code, containing the flash region's data.</td> + </tr> + <tr> + <td>hex</td> + <td>Generate a pair of Intel HEX files from the application code, containing the flash region's data (HEX) and EEPROM data (EEP).</td> + </tr> + <tr> + <td>lss</td> + <td>Generate a LSS listing file showing the disassembly of the compiled application.</td> + </tr> + <tr> + <td>clean</td> + <td>Remove all generated project intermediary and binary output files.</td> + </tr> + <tr> + <td>mostlyclean</td> + <td>Remove all generated project intermediary output files, but preserve the binary output files.</td> + </tr> + </tbody> +</table> + +## Mandatory Variables: + +The following variables must be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile to be able to use this module: + +<table> + <tbody> + <tr> + <td>MCU</td> + <td>Name of the Atmel processor model (e.g. `at90usb1287`).</td> + </tr> + <tr> + <td>TARGET</td> + <td>Name of the application output file prefix (e.g. `TestApplication`).</td> + </tr> + <tr> + <td>ARCH</td> + <td>Target device architecture (e.g. `AVR8`).</td> + </tr> + <tr> + <td>SRC</td> + <td>List of all project source files (C, C++, ASM).</td> + </tr> + </tbody> +</table> + +## Optional Variables: + +The following variables may be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile. If not specified, a default value will +be assumed. + +<table> + <tbody> + <tr> + <td>COMPILER_PATH</td> + <td>Path to the compiler to use, in case a specific compiler should be substituted for the one in the system's `PATH` variable. Default is blank (use `PATH` provided compiler).</td> + </tr> + <tr> + <td>OPTIMIZATION</td> + <td>Optimization level to use when compiling C and C++ source files. Default is `s` (optimize for smallest size).</td> + </tr> + <tr> + <td>C_STANDARD</td> + <td>C language standard used when compiling C language source files. Default is `gnu99` (C99 standard with GNU extensions)./td> + </tr> + <tr> + <td>CPP_STANDARD</td> + <td>C++ language standard used when compiling C++ language source files. Default is `gnu++98` (C++98 standard with GNU extensions)./td> + </tr> + <tr> + <td>F_CPU</td> + <td>Processor core clock frequency, in Hz. This is used by some architectures for functions such as software spin-loop delays. Default is blank (no value defined).</td> + </tr> + <tr> + <td>C_FLAGS</td> + <td>Common GCC flags passed to the compiler for C language (C) input files. Default is blank (no additional flags).</td> + </tr> + <tr> + <td>CPP_FLAGS</td> + <td>Common GCC flags passed to the compiler for C++ language (CPP) input files. Default is blank (no additional flags).</td> + </tr> + <tr> + <td>ASM_FLAGS</td> + <td>Common GCC flags passed to the assembler for assembly language (S) input files. Default is blank (no additional flags).</td> + </tr> + <tr> + <td>CC_FLAGS</td> + <td>Common GCC flags passed to the compiler for all source file types. Default is blank (no additional flags).</td> + </tr> + <tr> + <td>LD_FLAGS</td> + <td>Extra flags to pass to the GNU linker when linking the compiled object files into the resulting binary. Default is blank (no additional flags).</td> + </tr> + <tr> + <td>LINKER_RELAXATIONS</td> + <td>Boolean, if `Y` linker relaxations will be enabled to slightly reduce the resulting binary's size. Default is `Y`.</td> + </tr> + <tr> + <td>JUMP_TABLES</td> + <td>Boolean, if `Y` jump tables will be enabled to slightly reduce the resulting binary's size - note that this can cause incorrect jumps if the binary is relocated after compilation, such as for a bootloader. Default is `N`.</td> + </tr> + <tr> + <td>OBJDIR</td> + <td>Directory to store the intermediate object files, as they are generated from the source files. Default is `obj`.</td> + </tr> + <tr> + <td>OBJECT_FILES</td> + <td>List of additional `.o` object files to link into the final binary. Default is blank (no additional objects).</td> + </tr> + <tr> + <td>DEBUG_FORMAT</td> + <td>Debug ELF file format to generate. Default is `dwarf-2`.</td> + </tr> + <tr> + <td>DEBUG_LEVEL</td> + <td>Level of the debugging information to generate in the compiled object files. Debug is 2 (medium level debugging information).</td> + </tr> + </tbody> +</table> + +## Provided Variables: + +The following variables may be referenced in a user makefile (via `$(NAME)` +syntax) if desired, as they are provided by this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no variables.</td> + </tr> + </tbody> +</table> + +## Provided Macros: + +The following macros may be referenced in a user makefile (via +`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by +this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no macros.</td> + </tr> + </tbody> +</table> + +## Module Changelog: + +The changes to this module since its initial release are listed below, as of the +DMBS version where the change was made. + +### 20170426 +Added `JUMP_TABLES` optional variable. + +### 20160403 +Initial release. diff --git a/LUFA/Build/DMBS/DMBS/gcc.mk b/LUFA/Build/DMBS/DMBS/gcc.mk new file mode 100644 index 0000000000..6126cf97fc --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/gcc.mk @@ -0,0 +1,273 @@ +# +# DMBS Build System +# Released into the public domain. +# +# dean [at] fourwalledcubicle [dot] com +# www.fourwalledcubicle.com +# + +DMBS_BUILD_MODULES += GCC +DMBS_BUILD_TARGETS += size symbol-sizes all lib elf bin hex lss clean mostlyclean +DMBS_BUILD_MANDATORY_VARS += TARGET ARCH MCU SRC +DMBS_BUILD_OPTIONAL_VARS += COMPILER_PATH OPTIMIZATION C_STANDARD CPP_STANDARD F_CPU C_FLAGS CPP_FLAGS ASM_FLAGS CC_FLAGS LD_FLAGS OBJDIR OBJECT_FILES DEBUG_TYPE DEBUG_LEVEL LINKER_RELAXATIONS JUMP_TABLES +DMBS_BUILD_PROVIDED_VARS += +DMBS_BUILD_PROVIDED_MACROS += + +# Conditionally import the CORE module of DMBS if it is not already imported +DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) +ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) + include $(DMBS_MODULE_PATH)/core.mk +endif + +# Default values of optionally user-supplied variables +COMPILER_PATH ?= +OPTIMIZATION ?= s +F_CPU ?= +C_STANDARD ?= gnu99 +CPP_STANDARD ?= gnu++98 +C_FLAGS ?= +CPP_FLAGS ?= +ASM_FLAGS ?= +CC_FLAGS ?= +OBJDIR ?= obj +OBJECT_FILES ?= +DEBUG_FORMAT ?= dwarf-2 +DEBUG_LEVEL ?= 2 +LINKER_RELAXATIONS ?= Y +JUMP_TABLES ?= N + +# Sanity check user supplied values +$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) +$(call ERROR_IF_EMPTY, MCU) +$(call ERROR_IF_EMPTY, TARGET) +$(call ERROR_IF_EMPTY, ARCH) +$(call ERROR_IF_EMPTY, OPTIMIZATION) +$(call ERROR_IF_EMPTY, C_STANDARD) +$(call ERROR_IF_EMPTY, CPP_STANDARD) +$(call ERROR_IF_EMPTY, OBJDIR) +$(call ERROR_IF_EMPTY, DEBUG_FORMAT) +$(call ERROR_IF_EMPTY, DEBUG_LEVEL) +$(call ERROR_IF_NONBOOL, LINKER_RELAXATIONS) +$(call ERROR_IF_NONBOOL, JUMP_TABLES) + +# Determine the utility prefix to use for the selected architecture +ifeq ($(ARCH), AVR8) + CROSS := $(COMPILER_PATH)avr +else ifeq ($(ARCH), XMEGA) + CROSS := $(COMPILER_PATH)avr +else ifeq ($(ARCH), UC3) + CROSS := $(COMPILER_PATH)avr32 +else + $(error Unsupported architecture "$(ARCH)") +endif + +# Output Messages +MSG_INFO_MESSAGE := ' [INFO] :' +MSG_COMPILE_CMD := ' [GCC] :' +MSG_ASSEMBLE_CMD := ' [GAS] :' +MSG_NM_CMD := ' [NM] :' +MSG_REMOVE_CMD := ' [RM] :' +MSG_LINK_CMD := ' [LNK] :' +MSG_ARCHIVE_CMD := ' [AR] :' +MSG_SIZE_CMD := ' [SIZE] :' +MSG_OBJCPY_CMD := ' [OBJCPY] :' +MSG_OBJDMP_CMD := ' [OBJDMP] :' + +# Convert input source file list to differentiate them by type +C_SOURCE := $(filter %.c, $(SRC)) +CPP_SOURCE := $(filter %.cpp, $(SRC)) +ASM_SOURCE := $(filter %.S, $(SRC)) + +# Create a list of unknown source file types, if any are found throw an error +UNKNOWN_SOURCE := $(filter-out $(C_SOURCE) $(CPP_SOURCE) $(ASM_SOURCE), $(SRC)) +ifneq ($(UNKNOWN_SOURCE),) + $(error Unknown input source file formats: $(UNKNOWN_SOURCE)) +endif + +# Convert input source filenames into a list of required output object files +OBJECT_FILES += $(addsuffix .o, $(basename $(SRC))) + +# Check if an output object file directory was specified instead of the input file location +ifneq ($(OBJDIR),.) + # Prefix all the object filenames with the output object file directory path + OBJECT_FILES := $(addprefix $(patsubst %/,%,$(OBJDIR))/, $(notdir $(OBJECT_FILES))) + + # Check if any object file (without path) appears more than once in the object file list + ifneq ($(words $(sort $(OBJECT_FILES))), $(words $(OBJECT_FILES))) + $(error Cannot build with OBJDIR parameter set - one or more object file name is not unique) + endif + + # Create the output object file directory if it does not exist and add it to the virtual path list + $(shell mkdir -p $(OBJDIR) 2> /dev/null) + VPATH += $(dir $(SRC)) +endif + +# Create a list of dependency files from the list of object files +DEPENDENCY_FILES := $(OBJECT_FILES:%.o=%.d) + +# Create a list of common flags to pass to the compiler/linker/assembler +BASE_CC_FLAGS := -pipe -g$(DEBUG_FORMAT) -g$(DEBUG_LEVEL) +ifneq ($(findstring $(ARCH), AVR8 XMEGA),) + BASE_CC_FLAGS += -mmcu=$(MCU) -fshort-enums -fno-inline-small-functions -fpack-struct +else ifneq ($(findstring $(ARCH), UC3),) + BASE_CC_FLAGS += -mpart=$(MCU:at32%=%) -masm-addr-pseudos +endif +BASE_CC_FLAGS += -Wall -fno-strict-aliasing -funsigned-char -funsigned-bitfields -ffunction-sections +BASE_CC_FLAGS += -I. +BASE_CC_FLAGS += -DARCH=ARCH_$(ARCH) +ifneq ($(F_CPU),) + BASE_CC_FLAGS += -DF_CPU=$(F_CPU)UL +endif +ifeq ($(LINKER_RELAXATIONS), Y) + BASE_CC_FLAGS += -mrelax +endif +ifeq ($(JUMP_TABLES), N) + # This flag is required for bootloaders as GCC will emit invalid jump table + # assembly code for devices with large amounts of flash; the jump table target + # is extracted from FLASH without using the correct ELPM instruction, resulting + # in a pseudo-random jump target. + BASE_CC_FLAGS += -fno-jump-tables +endif + +# Additional language specific compiler flags +BASE_C_FLAGS := -x c -O$(OPTIMIZATION) -std=$(C_STANDARD) -Wstrict-prototypes +BASE_CPP_FLAGS := -x c++ -O$(OPTIMIZATION) -std=$(CPP_STANDARD) +BASE_ASM_FLAGS := -x assembler-with-cpp + +# Create a list of flags to pass to the linker +BASE_LD_FLAGS := -lm -Wl,-Map=$(TARGET).map,--cref -Wl,--gc-sections +ifeq ($(LINKER_RELAXATIONS), Y) + BASE_LD_FLAGS += -Wl,--relax +endif +ifneq ($(findstring $(ARCH), AVR8 XMEGA),) + BASE_LD_FLAGS += -mmcu=$(MCU) +else ifneq ($(findstring $(ARCH), UC3),) + BASE_LD_FLAGS += -mpart=$(MCU:at32%=%) --rodata-writable --direct-data +endif + +# Determine flags to pass to the size utility based on its reported features (only invoke if size target required) +# and on an architecture where this non-standard patch is available +ifneq ($(ARCH), UC3) +size: SIZE_MCU_FLAG := $(shell $(CROSS)-size --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) +size: SIZE_FORMAT_FLAG := $(shell $(CROSS)-size --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) +endif + +# Pre-build informational target, to give compiler and project name information when building +build_begin: + @echo $(MSG_INFO_MESSAGE) Begin compilation of project \"$(TARGET)\"... + @echo "" + @$(CROSS)-gcc --version + +# Post-build informational target, to project name information when building has completed +build_end: + @echo $(MSG_INFO_MESSAGE) Finished building project \"$(TARGET)\". + +# Prints size information of a compiled application (FLASH, RAM and EEPROM usages) +size: $(TARGET).elf + @echo $(MSG_SIZE_CMD) Determining size of \"$<\" + @echo "" + $(CROSS)-size $(SIZE_MCU_FLAG) $(SIZE_FORMAT_FLAG) $< + +# Prints size information on the symbols within a compiled application in decimal bytes +symbol-sizes: $(TARGET).elf + @echo $(MSG_NM_CMD) Extracting \"$<\" symbols with decimal byte sizes + $(CROSS)-nm --size-sort --demangle --radix=d $< + +# Cleans intermediary build files, leaving only the compiled application files +mostlyclean: + @echo $(MSG_REMOVE_CMD) Removing object files of \"$(TARGET)\" + rm -f $(OBJECT_FILES) + @echo $(MSG_REMOVE_CMD) Removing dependency files of \"$(TARGET)\" + rm -f $(DEPENDENCY_FILES) + +# Cleans all build files, leaving only the original source code +clean: mostlyclean + @echo $(MSG_REMOVE_CMD) Removing output files of \"$(TARGET)\" + rm -f $(TARGET).elf $(TARGET).hex $(TARGET).bin $(TARGET).eep $(TARGET).map $(TARGET).lss $(TARGET).sym lib$(TARGET).a + +# Performs a complete build of the user application and prints size information afterwards +all: build_begin elf hex bin lss sym size build_end + +# Helper targets, to build a specific type of output file without having to know the project target name +lib: lib$(TARGET).a +elf: $(TARGET).elf +hex: $(TARGET).hex $(TARGET).eep +bin: $(TARGET).bin +lss: $(TARGET).lss +sym: $(TARGET).sym + +# Default target to *create* the user application's specified source files; if this rule is executed by +# make, the input source file doesn't exist and an error needs to be presented to the user +$(SRC): + $(error Source file does not exist: $@) + +# Compiles an input C source file and generates an assembly listing for it +%.s: %.c $(MAKEFILE_LIST) + @echo $(MSG_COMPILE_CMD) Generating assembly from C file \"$(notdir $<)\" + $(CROSS)-gcc -S $(BASE_CC_FLAGS) $(BASE_C_FLAGS) $(CC_FLAGS) $(C_FLAGS) $< -o $@ + +# Compiles an input C++ source file and generates an assembly listing for it +%.s: %.cpp $(MAKEFILE_LIST) + @echo $(MSG_COMPILE_CMD) Generating assembly from C++ file \"$(notdir $<)\" + $(CROSS)-gcc -S $(BASE_CC_FLAGS) $(BASE_CPP_FLAGS) $(CC_FLAGS) $(CPP_FLAGS) $< -o $@ + +# Compiles an input C source file and generates a linkable object file for it +$(OBJDIR)/%.o: %.c $(MAKEFILE_LIST) + @echo $(MSG_COMPILE_CMD) Compiling C file \"$(notdir $<)\" + $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_C_FLAGS) $(CC_FLAGS) $(C_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@ + +# Compiles an input C++ source file and generates a linkable object file for it +$(OBJDIR)/%.o: %.cpp $(MAKEFILE_LIST) + @echo $(MSG_COMPILE_CMD) Compiling C++ file \"$(notdir $<)\" + $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_CPP_FLAGS) $(CC_FLAGS) $(CPP_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@ + +# Assembles an input ASM source file and generates a linkable object file for it +$(OBJDIR)/%.o: %.S $(MAKEFILE_LIST) + @echo $(MSG_ASSEMBLE_CMD) Assembling \"$(notdir $<)\" + $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_ASM_FLAGS) $(CC_FLAGS) $(ASM_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@ + +# Generates a library archive file from the user application, which can be linked into other applications +.PRECIOUS : $(OBJECT_FILES) +.SECONDARY : %.a +%.a: $(OBJECT_FILES) + @echo $(MSG_ARCHIVE_CMD) Archiving object files into \"$@\" + $(CROSS)-ar rcs $@ $(OBJECT_FILES) + +# Generates an ELF debug file from the user application, which can be further processed for FLASH and EEPROM data +# files, or used for programming and debugging directly +.PRECIOUS : $(OBJECT_FILES) +.SECONDARY : %.elf +%.elf: $(OBJECT_FILES) + @echo $(MSG_LINK_CMD) Linking object files into \"$@\" + $(CROSS)-gcc $^ -o $@ $(BASE_LD_FLAGS) $(LD_FLAGS) + +# Extracts out the loadable FLASH memory data from the project ELF file, and creates an Intel HEX format file of it +%.hex: %.elf + @echo $(MSG_OBJCPY_CMD) Extracting HEX file data from \"$<\" + $(CROSS)-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature $< $@ + +# Extracts out the loadable FLASH memory data from the project ELF file, and creates an Binary format file of it +%.bin: %.elf + @echo $(MSG_OBJCPY_CMD) Extracting BIN file data from \"$<\" + $(CROSS)-objcopy -O binary -R .eeprom -R .fuse -R .lock -R .signature $< $@ + +# Extracts out the loadable EEPROM memory data from the project ELF file, and creates an Intel HEX format file of it +%.eep: %.elf + @echo $(MSG_OBJCPY_CMD) Extracting EEP file data from \"$<\" + $(CROSS)-objcopy -O ihex -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings $< $@ || exit 0 + +# Creates an assembly listing file from an input project ELF file, containing interleaved assembly and source data +%.lss: %.elf + @echo $(MSG_OBJDMP_CMD) Extracting LSS file data from \"$<\" + $(CROSS)-objdump -h -d -S -z $< > $@ + +# Creates a symbol file listing the loadable and discarded symbols from an input project ELF file +%.sym: %.elf + @echo $(MSG_NM_CMD) Extracting SYM file data from \"$<\" + $(CROSS)-nm -n $< > $@ + +# Include build dependency files +-include $(DEPENDENCY_FILES) + +# Phony build targets for this module +.PHONY: build_begin build_end $(DMBS_BUILD_TARGETS) diff --git a/LUFA/Build/DMBS/DMBS/hid.md b/LUFA/Build/DMBS/DMBS/hid.md new file mode 100644 index 0000000000..b2dfbf7136 --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/hid.md @@ -0,0 +1,129 @@ +DMBS - Dean's Makefile Build System +=================================== + + +Module: HID +----------------- + +The HID module provides build targets to program a target running a PJRC Teensy +or LUFA compatible HID class bootloader. + +## Importing This Module into a Makefile: + +To use this module in your application makefile, add the following code to your +makefile: + + include $(DMBS_PATH)/hid.mk + +## Prerequisites: + +This module requires the `teensy_loader_cli` utility to be available in your +system's `PATH` variable. The `teensy_loader_cli` utility is distributed in +a modified form (from PJRC) in the LUFA project's +[official site](http://www.lufa-lib.org/), but is also +made available in its original form directly from the +[PJRC website](https://www.pjrc.com/teensy/loader_cli.html). Note that the +original tool works with Teensy boards only, and not LUFA HID bootloader +devices. + +This module requires the `hid_bootloader_cli` utility to be available in your +system's `PATH` variable. The `hid_bootloader_cli` Python script utility is +distributed in LUFA project's [official site](http://www.lufa-lib.org/). + +This module requires the AVR-GCC compiler to be installed and available in the +system's `PATH` variable. + +## Build Targets: + +The following targets are supported by this module: + +<table> + <tbody> + <tr> + <td>hid</td> + <td>Program a LUFA HID class bootloader device, using the `hid_bootloader_cli.py` Python script.</td> + </tr> + <tr> + <td>hid-ee</td> + <td>Program a LUFA HID class bootloader device's EEPROM, using the `hid_bootloader_cli.py` Python script and a shim application which is programmed into the target's flash.</td> + </tr> + <tr> + <td>teensy</td> + <td>Program a LUFA HID class bootloader device or Teensy board, using the `teensy_loader_cli` tool.</td> + </tr> + <tr> + <td>teensy-ee</td> + <td>Program a LUFA HID class bootloader device's EEPROM, using the `teensy_loader_cli` tool and a shim application which is programmed into the target's flash.</td> + </tr> + </tbody> +</table> + +## Mandatory Variables: + +The following variables must be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile to be able to use this module: + +<table> + <tbody> + <tr> + <td>MCU</td> + <td>Name of the Atmel processor model (e.g. `at90usb1287`).</td> + </tr> + <tr> + <td>TARGET</td> + <td>Name of the application output file prefix (e.g. `TestApplication`).</td> + </tr> + </tbody> +</table> + +## Optional Variables: + +The following variables may be defined (with a `NAME = VALUE` syntax, one +variable per line) in the user makefile. If not specified, a default value will +be assumed. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module has no optional variables.</td> + </tr> + </tbody> +</table> + +## Provided Variables: + +The following variables may be referenced in a user makefile (via `$(NAME)` +syntax) if desired, as they are provided by this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no variables.</td> + </tr> + </tbody> +</table> + +## Provided Macros: + +The following macros may be referenced in a user makefile (via +`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by +this module. + +<table> + <tbody> + <tr> + <td>N/A</td> + <td>This module provides no macros.</td> + </tr> + </tbody> +</table> + +## Module Changelog: + +The changes to this module since its initial release are listed below, as of the +DMBS version where the change was made. + +### 20160403 +Initial release. diff --git a/LUFA/Build/DMBS/DMBS/hid.mk b/LUFA/Build/DMBS/DMBS/hid.mk new file mode 100644 index 0000000000..7a0ad9d0e6 --- /dev/null +++ b/LUFA/Build/DMBS/DMBS/hid.mk @@ -0,0 +1,57 @@ +# +# DMBS Build System +# Released into the public domain. +# +# dean [at] fourwalledcubicle [dot] com +# www.fourwalledcubicle.com +# + +DMBS_BUILD_MODULES += HID +DMBS_BUILD_TARGETS += hid hid-ee teensy teensy-ee +DMBS_BUILD_MANDATORY_VARS += MCU TARGET +DMBS_BUILD_OPTIONAL_VARS += +DMBS_BUILD_PROVIDED_VARS += +DMBS_BUILD_PROVIDED_MACROS += + +# Conditionally import the CORE module of DMBS if it is not already imported +DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) +ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) + include $(DMBS_MODULE_PATH)/core.mk +endif + +# Sanity-check values of mandatory user-supplied variables +$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) +$(call ERROR_IF_EMPTY, MCU) +$(call ERROR_IF_EMPTY, TARGET) + +# Output Messages +MSG_HID_BOOTLOADER_CMD := ' [HID] :' +MSG_OBJCPY_CMD := ' [OBJCPY] :' +MSG_MAKE_CMD := ' [MAKE] :' + +# Programs in the target FLASH memory using the HID_BOOTLOADER_CLI tool +hid: $(TARGET).hex $(MAKEFILE_LIST) + @echo $(MSG_HID_BOOTLOADER_CMD) Programming FLASH with hid_bootloader_cli using \"$<\" + hid_bootloader_cli -mmcu=$(MCU) -v $< + +# Programs in the target EEPROM memory using the HID_BOOTLOADER_CLI tool (note: clears target FLASH memory) +hid-ee: $(TARGET).eep $(MAKEFILE_LIST) + @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a binary file \"InputEEData.bin\" + avr-objcopy -I ihex -O binary $< $(DMBS_MODULE_PATH)/HID_EEPROM_Loader/InputEEData.bin + @echo $(MSG_MAKE_CMD) Making EEPROM loader application for \"$<\" + $(MAKE) -C $(DMBS_MODULE_PATH)/HID_EEPROM_Loader/ MCU=$(MCU) clean hid + +# Programs in the target FLASH memory using the TEENSY_BOOTLOADER_CLI tool +teensy: $(TARGET).hex $(MAKEFILE_LIST) + @echo $(MSG_HID_BOOTLOADER_CMD) Programming FLASH with teensy_loader_cli using \"$<\" + teensy_loader_cli -mmcu=$(MCU) -v $< + +# Programs in the target EEPROM memory using the TEENSY_BOOTLOADER_CLI tool (note: clears target FLASH memory) +teensy-ee: $(TARGET).hex $(MAKEFILE_LIST) + @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a binary file \"InputEEData.bin\" + avr-objcopy -I ihex -O binary $< $(DMBS_MODULE_PATH)/HID_EEPROM_Loader/InputEEData.bin + @echo $(MSG_MAKE_CMD) Making EEPROM loader application for \"$<\" + $(MAKE) -s -C $(DMBS_MODULE_PATH)/HID_EEPROM_Loader/ MCU=$(MCU) clean teensy + +# Phony build targets for this module +.PHONY: $(DMBS_BUILD_TARGETS) diff --git a/LUFA/Build/DMBS/Readme.md b/LUFA/Build/DMBS/Readme.md new file mode 100644 index 0000000000..f4f7a5f15c --- /dev/null +++ b/LUFA/Build/DMBS/Readme.md @@ -0,0 +1,123 @@ +DMBS - Dean's Makefile Build System +=================================== + + +Project Overview +---------------- + +GNU Make is scary, and it's tough to get the rules right sometimes. Many +projects get by via simple copy-pasting of old makefiles, resulting in many +redundant copies of the same old rules. DMBS aims to solve this by providing a +simple modular set of makefiles which can be included by your project to quickly +add various build functionality. + +This aims to replace the old WinAVR "mfile" makefile template, giving better +functionality and much simpler user makefiles. + + +Benefits: +---------------- + +Apart from much simpler, cleaner makefiles DMBS carries the aim of making the +process of troubleshooting build issues a little easier. Lots can go wrong, so +DMBS tries to sanity check its inputs wherever possible, and produce +human-readable error messages. Forgotten to set a variable? Get a +`Makefile {X} value not set.` message, rather than a possibly unrelated message. +Have the wrong filename? See `Source file does not exist: {X}` rather than the +infamous `No rule to make target {X}` message. + + +Use: +---------------- + +A template user makefile is provided in the `Template` directory. DMBS modules +are included via a GNU Make `include` directive. While the DMBS `core` module is +always required, you can pick and choose what other modules you wish to add to +your user project. + +[See here for the documentation on the individual modules provided by DMBS.](DMBS/ModulesOverview.md) +If you're interested in writing your own DMBS module(s), [see here.](DMBS/WritingYourOwnModules.md) + +Here's an example user makefile: + + MCU = atmega128 + ARCH = AVR8 + F_CPU = 8000000 + OPTIMIZATION = s + TARGET = Template + SRC = $(TARGET).c + CC_FLAGS = + LD_FLAGS = + + # Default target + all: + + # Include DMBS build script makefiles + DMBS_PATH ?= ../DMBS + include $(DMBS_PATH)/core.mk + include $(DMBS_PATH)/gcc.mk + include $(DMBS_PATH)/cppcheck.mk + include $(DMBS_PATH)/doxygen.mk + include $(DMBS_PATH)/dfu.mk + include $(DMBS_PATH)/hid.mk + include $(DMBS_PATH)/avrdude.mk + include $(DMBS_PATH)/atprogram.mk + +Each DMBS module can optionally supply one or more Make variables and macros, +which you can reference in your user makefile. Additionally, modules can require +one or more variables to be set by the user makefile, with (in some cases) sane +defaults used if left out. + +As modules are added, you can get a list of available targets by simply typing +`make help` from the command line. This will produce a formatted list of targets +as well as mandatory and optional variables and exposed variables and macros. + + +Distribution +---------------- + +You can embed DMBS in your project any way you like - some options are: +1. A git submodule +2. A source tarball +3. A manually copied extracted archive + +The intention of DMBS is that users can just import it from whatever source +they like. If your project needs to extend the existing modules in an unusual +manner, or if you want to provide your own modules, you can include them in +your project repository (or submit a patch to DMBS if your module is generic +enough to warrant wide use). + + +License +---------------- + +DMBS is released into the public domain, making is suitable for use everywhere, +by everyone. Contributions are greatly appreciated however, in order to make +DMBS better for everyone. + +The actual license text is as follows: + + This is free and unencumbered software released into the public domain. + + Anyone is free to copy, modify, publish, use, compile, sell, or + distribute this software, either in source code form or as a compiled + binary, for any purpose, commercial or non-commercial, and by any + means. + + In jurisdictions that recognize copyright laws, the author or authors + of this software dedicate any and all copyright interest in the + software to the public domain. We make this dedication for the benefit + of the public at large and to the detriment of our heirs and + successors. We intend this dedication to be an overt act of + relinquishment in perpetuity of all present and future rights to this + software under copyright law. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR + OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + OTHER DEALINGS IN THE SOFTWARE. + + For more information, please refer to <http://unlicense.org/> diff --git a/LUFA/Build/DMBS/Template/Template.c b/LUFA/Build/DMBS/Template/Template.c new file mode 100644 index 0000000000..95d36f7dbf --- /dev/null +++ b/LUFA/Build/DMBS/Template/Template.c @@ -0,0 +1,12 @@ +/* + DMBS Build System + Released into the public domain. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com + */ + +int main(void) +{ + // Application code here. +} diff --git a/LUFA/Build/DMBS/Template/makefile b/LUFA/Build/DMBS/Template/makefile new file mode 100644 index 0000000000..d88292388c --- /dev/null +++ b/LUFA/Build/DMBS/Template/makefile @@ -0,0 +1,32 @@ +# +# DMBS Build System +# Released into the public domain. +# +# dean [at] fourwalledcubicle [dot] com +# www.fourwalledcubicle.com +# + +# Run "make help" for target help. + +MCU = atmega128 +ARCH = AVR8 +F_CPU = 8000000 +OPTIMIZATION = s +TARGET = Template +SRC = $(TARGET).c +CC_FLAGS = +LD_FLAGS = + +# Default target +all: + +# Include DMBS build script makefiles +DMBS_PATH ?= ../DMBS +include $(DMBS_PATH)/core.mk +include $(DMBS_PATH)/gcc.mk +include $(DMBS_PATH)/cppcheck.mk +include $(DMBS_PATH)/doxygen.mk +include $(DMBS_PATH)/dfu.mk +include $(DMBS_PATH)/hid.mk +include $(DMBS_PATH)/avrdude.mk +include $(DMBS_PATH)/atprogram.mk diff --git a/LUFA/Build/LUFA/lufa-gcc.mk b/LUFA/Build/LUFA/lufa-gcc.mk new file mode 100644 index 0000000000..f824362e4d --- /dev/null +++ b/LUFA/Build/LUFA/lufa-gcc.mk @@ -0,0 +1,43 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2015. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +DMBS_BUILD_MODULES += LUFA_GCC +DMBS_BUILD_TARGETS += +DMBS_BUILD_MANDATORY_VARS += LUFA_PATH ARCH F_USB +DMBS_BUILD_OPTIONAL_VARS += BOARD +DMBS_BUILD_PROVIDED_VARS += +DMBS_BUILD_PROVIDED_MACROS += + +SHELL = /bin/sh + +ERROR_IF_UNSET ?= $(if $(filter undefined, $(origin $(strip $(1)))), $(error Makefile $(strip $(1)) value not set)) +ERROR_IF_EMPTY ?= $(if $(strip $($(strip $(1)))), , $(error Makefile $(strip $(1)) option cannot be blank)) +ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(strip $(1)) option must be Y or N)) + +# Sanity check user supplied values +$(call ERROR_IF_EMPTY, LUFA_PATH) +$(call ERROR_IF_EMPTY, ARCH) +$(call ERROR_IF_EMPTY, F_USB) + +# Default values of optionally user-supplied variables +BOARD ?= NONE + +# Determine the utility prefix to use for the selected architecture +ifeq ($(ARCH), XMEGA) + $(warning The XMEGA device support is currently EXPERIMENTAL (incomplete and/or non-functional), and is included for preview purposes only.) +else ifeq ($(ARCH), UC3) + $(warning The UC3 device support is currently EXPERIMENTAL (incomplete and/or non-functional), and is included for preview purposes only.) +endif + +# Common LUFA C/C++ includes/definitions +LUFA_CXX_INCLUDES = -I. -I$(patsubst %/,%,$(LUFA_PATH))/.. +LUFA_CXX_DEFINES = -DARCH=ARCH_$(ARCH) -DBOARD=BOARD_$(BOARD) -DF_USB=$(F_USB)UL + +# LUFA specific standard build options +C_FLAGS += $(LUFA_CXX_INCLUDES) $(LUFA_CXX_DEFINES) $(LUFA_CXX_FLAGS) +CPP_FLAGS += $(LUFA_CXX_INCLUDES) $(LUFA_CXX_DEFINES) $(LUFA_CXX_FLAGS) diff --git a/LUFA/Build/LUFA/lufa-sources.mk b/LUFA/Build/LUFA/lufa-sources.mk new file mode 100644 index 0000000000..7ca9a28dc9 --- /dev/null +++ b/LUFA/Build/LUFA/lufa-sources.mk @@ -0,0 +1,95 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2015. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +DMBS_BUILD_MODULES += LUFA_SOURCES +DMBS_BUILD_TARGETS += +DMBS_BUILD_MANDATORY_VARS += LUFA_PATH ARCH +DMBS_BUILD_OPTIONAL_VARS += +DMBS_BUILD_PROVIDED_VARS += LUFA_SRC_USB_DEVICE LUFA_SRC_USB_HOST \ + LUFA_SRC_USB LUFA_SRC_USBCLASS_DEVICE \ + LUFA_SRC_USBCLASS_HOST LUFA_SRC_USBCLASS \ + LUFA_SRC_TEMPERATURE LUFA_SRC_SERIAL \ + LUFA_SRC_TWI LUFA_SRC_PLATFORM +DMBS_BUILD_PROVIDED_MACROS += + +SHELL = /bin/sh + +ERROR_IF_UNSET ?= $(if $(filter undefined, $(origin $(strip $(1)))), $(error Makefile $(strip $(1)) value not set)) +ERROR_IF_EMPTY ?= $(if $(strip $($(strip $(1)))), , $(error Makefile $(strip $(1)) option cannot be blank)) +ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(strip $(1)) option must be Y or N)) + +# Sanity check user supplied values +$(foreach MANDATORY_VAR, $(LUFA_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) +$(call ERROR_IF_EMPTY, LUFA_PATH) +$(call ERROR_IF_EMPTY, ARCH) + +# Allow LUFA_ROOT_PATH to be overridden elsewhere to support legacy LUFA makefiles +LUFA_ROOT_PATH ?= $(patsubst %/,%,$(LUFA_PATH)) + +# Construct LUFA module source variables +LUFA_SRC_USB_COMMON := $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBController_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBInterrupt_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/ConfigDescriptors.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/Events.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/USBTask.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Common/HIDParser.c \ + +LUFA_SRC_USB_HOST := $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Host_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Pipe_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/PipeStream_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/HostStandardReq.c \ + $(LUFA_SRC_USB_COMMON) + +LUFA_SRC_USB_DEVICE := $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Device_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Endpoint_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/EndpointStream_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/DeviceStandardReq.c \ + $(LUFA_SRC_USB_COMMON) + +LUFA_SRC_USBCLASS_DEVICE := $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/AudioClassDevice.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/CDCClassDevice.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/HIDClassDevice.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MassStorageClassDevice.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MIDIClassDevice.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/PrinterClassDevice.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/RNDISClassDevice.c \ + +LUFA_SRC_USBCLASS_HOST := $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AudioClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/CDCClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/HIDClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MassStorageClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MIDIClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/PrinterClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/RNDISClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/StillImageClassHost.c + +LUFA_SRC_USB := $(sort $(LUFA_SRC_USB_COMMON) $(LUFA_SRC_USB_HOST) $(LUFA_SRC_USB_DEVICE)) + +LUFA_SRC_USBCLASS := $(LUFA_SRC_USBCLASS_DEVICE) $(LUFA_SRC_USBCLASS_HOST) + +LUFA_SRC_TEMPERATURE := $(LUFA_ROOT_PATH)/Drivers/Board/Temperature.c + +LUFA_SRC_SERIAL := $(LUFA_ROOT_PATH)/Drivers/Peripheral/$(ARCH)/Serial_$(ARCH).c + +LUFA_SRC_TWI := $(LUFA_ROOT_PATH)/Drivers/Peripheral/$(ARCH)/TWI_$(ARCH).c + +ifeq ($(ARCH), UC3) + LUFA_SRC_PLATFORM := $(LUFA_ROOT_PATH)/Platform/UC3/Exception.S \ + $(LUFA_ROOT_PATH)/Platform/UC3/InterruptManagement.c +else + LUFA_SRC_PLATFORM := +endif + +# Build a list of all available module sources +LUFA_SRC_ALL_FILES := $(LUFA_SRC_USB) \ + $(LUFA_SRC_USBCLASS) \ + $(LUFA_SRC_TEMPERATURE) \ + $(LUFA_SRC_SERIAL) \ + $(LUFA_SRC_TWI) \ + $(LUFA_SRC_PLATFORM) diff --git a/LUFA/Build/lufa_atprogram.mk b/LUFA/Build/lufa_atprogram.mk new file mode 100644 index 0000000000..86988d1cae --- /dev/null +++ b/LUFA/Build/lufa_atprogram.mk @@ -0,0 +1,10 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2015. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +DMBS_PATH := $(LUFA_PATH)/Build/DMBS/DMBS +include $(DMBS_PATH)/atprogram.mk diff --git a/LUFA/Build/lufa_avrdude.mk b/LUFA/Build/lufa_avrdude.mk new file mode 100644 index 0000000000..649215f5a3 --- /dev/null +++ b/LUFA/Build/lufa_avrdude.mk @@ -0,0 +1,10 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2015. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +DMBS_PATH := $(LUFA_PATH)/Build/DMBS/DMBS +include $(DMBS_PATH)/avrdude.mk diff --git a/LUFA/Build/lufa_build.mk b/LUFA/Build/lufa_build.mk new file mode 100644 index 0000000000..f7c496e183 --- /dev/null +++ b/LUFA/Build/lufa_build.mk @@ -0,0 +1,12 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2015. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +DMBS_PATH ?= $(LUFA_PATH)/Build/DMBS/DMBS +DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA +include $(DMBS_PATH)/gcc.mk +include $(DMBS_LUFA_PATH)/lufa-gcc.mk diff --git a/LUFA/Build/lufa_core.mk b/LUFA/Build/lufa_core.mk new file mode 100644 index 0000000000..62cef9046a --- /dev/null +++ b/LUFA/Build/lufa_core.mk @@ -0,0 +1,10 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2015. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +DMBS_PATH := $(LUFA_PATH)/Build/DMBS/DMBS +include $(DMBS_PATH)/core.mk diff --git a/LUFA/Build/lufa_cppcheck.mk b/LUFA/Build/lufa_cppcheck.mk new file mode 100644 index 0000000000..801a4c15c5 --- /dev/null +++ b/LUFA/Build/lufa_cppcheck.mk @@ -0,0 +1,10 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2015. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +DMBS_PATH := $(LUFA_PATH)/Build/DMBS/DMBS +include $(DMBS_PATH)/cppcheck.mk diff --git a/LUFA/Build/lufa_dfu.mk b/LUFA/Build/lufa_dfu.mk new file mode 100644 index 0000000000..2100ae8f78 --- /dev/null +++ b/LUFA/Build/lufa_dfu.mk @@ -0,0 +1,10 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2015. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +DMBS_PATH := $(LUFA_PATH)/Build/DMBS/DMBS +include $(DMBS_PATH)/dfu.mk diff --git a/LUFA/Build/lufa_doxygen.mk b/LUFA/Build/lufa_doxygen.mk new file mode 100644 index 0000000000..64afd4a5ac --- /dev/null +++ b/LUFA/Build/lufa_doxygen.mk @@ -0,0 +1,10 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2015. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +DMBS_PATH := $(LUFA_PATH)/Build/DMBS/DMBS +include $(DMBS_PATH)/doxygen.mk diff --git a/LUFA/Build/lufa_hid.mk b/LUFA/Build/lufa_hid.mk new file mode 100644 index 0000000000..86ca145bfa --- /dev/null +++ b/LUFA/Build/lufa_hid.mk @@ -0,0 +1,10 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2015. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +DMBS_PATH := $(LUFA_PATH)/Build/DMBS/DMBS +include $(DMBS_PATH)/hid.mk diff --git a/LUFA/Build/lufa_sources.mk b/LUFA/Build/lufa_sources.mk new file mode 100644 index 0000000000..48291c7317 --- /dev/null +++ b/LUFA/Build/lufa_sources.mk @@ -0,0 +1,10 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2015. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA +include $(DMBS_LUFA_PATH)/lufa-sources.mk |