summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--keyboards/pearl/README.md85
-rw-r--r--keyboards/pearl/config.h4
-rw-r--r--keyboards/pearl/i2c.c106
-rw-r--r--keyboards/pearl/i2c.h27
-rw-r--r--keyboards/pearl/matrix.c106
-rw-r--r--keyboards/pearl/pearl.c67
-rw-r--r--keyboards/pearl/pearl.h6
-rw-r--r--keyboards/pearl/readme.md47
-rw-r--r--keyboards/pearl/rules.mk5
-rw-r--r--keyboards/pearl/usbconfig.h5
10 files changed, 102 insertions, 356 deletions
diff --git a/keyboards/pearl/README.md b/keyboards/pearl/README.md
deleted file mode 100644
index ec54ba80f5..0000000000
--- a/keyboards/pearl/README.md
+++ /dev/null
@@ -1,85 +0,0 @@
-# Pearl 40%
-
-Pearl 40% is a keyboard designed by Koobaczech. It uses an Atmel
-ATMEGA32A MCU.
-
-## Compiling and flashing
-
-These instructions are for building and flashing your Pearl 40% without
-Bootmapper Client.
-
-### Requirements
-
-#### Windows
-
-(to be written, help needed)
-
-#### Mac
-
-Apart from regular QMK and AVR dependencies you need to install
-`bootloadHID`. You can install it with `homebrew` as follows:
-
- $ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-
-If you don't use `homebrew` you can try following the compiling
-instructions defined below in the Linux section.
-
-#### Linux
-
-For Linux you require all regular QMK dependencies, but make sure you're
-using `gcc-avr` version 4.9 or higher. 4.8 and lower do not contain the
-proper definitions for ATMEGA32A MCUs and QMK will fail while attempting
-to compile a HEX for Pearl 40%.
-
-E.g. you cannot compile Pearl 40% HEX on a regular Ubuntu 14.04 as
-`gcc-avr` version is maxed to 4.8 on it.
-
-Additionally you need an operational `bootloadHID` binary.
-
-You can install `bootloadHID` by taking the following steps:
-
- $ git clone https://github.com/robertgzr/bootloadHID ~/tmp/bootloadHIDsrc
- $ cd ~/tmp/bootloadHIDsrc/commandline
- $ make VENDORID=0x16c0 PRODUCTID=0x05DF # vid and pid for atmega32a
- $ chmod +x bootloadHID && cp bootloadHID /usr/bin/bootloadHID
-
-Running `which bootloadHID` should return `/usr/bin/bootloadHID`.
-
-### Compiling
-
-Enter the QMK root directory and compile a keymap with the following
-command:
-
- $ make pearl:<keymap>
-
-where `<keymap>` is a layout directory under the `pearl` directory.
-
-QMK should compile a HEX (called `pearl_<keymap>.hex`) for you, which
-you can flash using `bootloadHID`.
-
-### Flashing
-
-To enable Pearl 40% bootloading mode, unplug the keyboard, then plug it
-in while holding `Esc` at the same time (the top-leftmost switch on the
-PCB, next to the USB connector). Once the board is in bootload mode,
-issue the following command (you might require `sudo` to perform the
-command):
-
- # assuming we're still in the QMK root dir where you compiled a HEX into
- $ bootloadHID -r ./pearl_<keymap>.hex
-
-You should see something similar to
-
- > Page size = <value>
- > Device size = <value>; <value> remaining
- > Uploading <value> bytes starting at 0 (0x0)
- > <value> ... <current value>
-
-where `<current value>` should be slowly increasing as the HEX is being
-flashed to the board. If there is some warning about `resource busy` it
-should still work OK.
-
-Once done the board underglow should turn red and the new firmware has
-been flashed. If you can't type on the board try plugging it in again
-(without holding any keys to prevent accidentally setting it into
-bootload mode again).
diff --git a/keyboards/pearl/config.h b/keyboards/pearl/config.h
index 6edf170d97..00850b8f09 100644
--- a/keyboards/pearl/config.h
+++ b/keyboards/pearl/config.h
@@ -35,8 +35,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 4
#define MATRIX_COLS 13
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
-#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6}
+#define MATRIX_ROW_PINS { B0, B1, B2, B3 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3}
#define UNUSED_PINS
#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/pearl/i2c.c b/keyboards/pearl/i2c.c
deleted file mode 100644
index a4f9521352..0000000000
--- a/keyboards/pearl/i2c.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
- uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
- if (bitrate_div >= 16) {
- bitrate_div = (bitrate_div - 16) / 2;
- }
- TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
- // set pull-up resistors on I2C bus pins
- PORTC |= 0b11;
-
- i2c_set_bitrate(400);
-
- // enable TWI (two-wire interface)
- TWCR |= (1 << TWEN);
-
- // enable TWI interrupt and slave address ACK
- TWCR |= (1 << TWIE);
- TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
- // reset TWI control register
- TWCR = 0;
-
- // begin transmission and wait for it to end
- TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
- while (!(TWCR & (1<<TWINT)));
-
- // check if the start condition was successfully transmitted
- if ((TWSR & 0xF8) != TW_START) {
- return 1;
- }
-
- // transmit address and wait
- TWDR = address;
- TWCR = (1<<TWINT) | (1<<TWEN);
- while (!(TWCR & (1<<TWINT)));
-
- // check if the device has acknowledged the READ / WRITE mode
- uint8_t twst = TW_STATUS & 0xF8;
- if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
- return 1;
- }
-
- return 0;
-}
-
-void i2c_stop(void) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
- TWDR = data;
-
- // transmit data and wait
- TWCR = (1<<TWINT) | (1<<TWEN);
- while (!(TWCR & (1<<TWINT)));
-
- if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
- return 1;
- }
-
- return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
- if (i2c_start(address)) {
- return 1;
- }
-
- for (uint16_t i = 0; i < length; i++) {
- if (i2c_write(data[i])) {
- return 1;
- }
- }
-
- i2c_stop();
-
- return 0;
-}
diff --git a/keyboards/pearl/i2c.h b/keyboards/pearl/i2c.h
deleted file mode 100644
index 93a69c94da..0000000000
--- a/keyboards/pearl/i2c.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif
diff --git a/keyboards/pearl/matrix.c b/keyboards/pearl/matrix.c
deleted file mode 100644
index 57aa36b5ff..0000000000
--- a/keyboards/pearl/matrix.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/delay.h>
-
-#include "matrix.h"
-
-#ifndef DEBOUNCE
-#define DEBOUNCE 5
-#endif
-
-static uint8_t debouncing = DEBOUNCE;
-
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-void matrix_init(void) {
- // all outputs for rows high
- DDRB = 0xFF;
- PORTB = 0xFF;
- // all inputs for columns
- DDRA = 0x00;
- DDRC &= ~(0x111111<<2);
- DDRD &= ~(1<<PIND7);
- // all columns are pulled-up
- PORTA = 0xFF;
- PORTC |= (0b111111<<2);
- PORTD |= (1<<PIND7);
-
- // initialize matrix state: all keys off
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- matrix[row] = 0x00;
- matrix_debouncing[row] = 0x00;
- }
-}
-
-void matrix_set_row_status(uint8_t row) {
- DDRB = (1 << row);
- PORTB = ~(1 << row);
-}
-
-uint8_t bit_reverse(uint8_t x) {
- x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
- x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
- x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
- return x;
-}
-
-uint8_t matrix_scan(void) {
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- matrix_set_row_status(row);
- _delay_us(5);
-
- matrix_row_t cols = (
- // cols 0..7, PORTA 0 -> 7
- (~PINA) & 0xFF
- ) | (
- // cols 8..13, PORTC 7 -> 0
- bit_reverse((~PINC) & 0xFF) << 8
- ) | (
- // col 14, PORTD 7
- ((~PIND) & (1 << PIND7)) << 7
- );
-
- if (matrix_debouncing[row] != cols) {
- matrix_debouncing[row] = cols;
- debouncing = DEBOUNCE;
- }
- }
-
- if (debouncing) {
- if (--debouncing) {
- _delay_ms(1);
- } else {
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = matrix_debouncing[i];
- }
- }
- }
-
- matrix_scan_user();
-
- return 1;
-}
-
-inline matrix_row_t matrix_get_row(uint8_t row) {
- return matrix[row];
-}
-
-void matrix_print(void) {
-}
diff --git a/keyboards/pearl/pearl.c b/keyboards/pearl/pearl.c
index 3bbadb0a7f..c8cd8a8609 100644
--- a/keyboards/pearl/pearl.c
+++ b/keyboards/pearl/pearl.c
@@ -15,16 +15,11 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include "pearl.h"
#include "rgblight.h"
-#include "backlight.h"
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
+#include "i2c_master.h"
#include "quantum.h"
+#ifdef RGBLIGHT_ENABLE
extern rgblight_config_t rgblight_config;
void rgblight_set(void) {
@@ -37,23 +32,59 @@ void rgblight_set(void) {
}
i2c_init();
- i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+ i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
}
+#endif
-void backlight_init_ports(void) {
- DDRD |= (1<<4);
- PORTD &= ~(1<<4);
+void matrix_init_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+ if (rgblight_config.enable) {
+ i2c_init();
+ i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+ }
+#endif
+ // call user level keymaps, if any
+ matrix_init_user();
}
-void backlight_set(uint8_t level) {
- if (level > 0) {
- PORTD |= (1<<4);
- } else {
- PORTD &= ~(1<<4);
- }
+void matrix_scan_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+ rgblight_task();
+#endif
+ matrix_scan_user();
+ /* Nothing else for now. */
}
__attribute__ ((weak))
void matrix_scan_user(void) {
- rgblight_task();
}
+
+void backlight_init_ports(void) {
+ // initialize pins D0, D1, D4 and D6 as output
+ setPinOutput(D0);
+ setPinOutput(D1);
+ setPinOutput(D4);
+ setPinOutput(D6);
+
+ // turn backlight LEDs on
+ writePinHigh(D0);
+ writePinHigh(D1);
+ writePinHigh(D4);
+ writePinHigh(D6);
+}
+
+void backlight_set(uint8_t level) {
+ if (level == 0) {
+ // turn backlight LEDs off
+ writePinLow(D0);
+ writePinLow(D1);
+ writePinLow(D4);
+ writePinLow(D6);
+ } else {
+ // turn backlight LEDs on
+ writePinHigh(D0);
+ writePinHigh(D1);
+ writePinHigh(D4);
+ writePinHigh(D6);
+ }
+} \ No newline at end of file
diff --git a/keyboards/pearl/pearl.h b/keyboards/pearl/pearl.h
index 6f5fbce5db..72df1595de 100644
--- a/keyboards/pearl/pearl.h
+++ b/keyboards/pearl/pearl.h
@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef PEARL_H
-#define PEARL_H
+#pragma once
#include "quantum.h"
#include "pearl.h"
@@ -56,6 +55,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO}, \
{ K30, K31, KC_NO, KC_NO, KC_NO, K35, KC_NO, KC_NO, KC_NO, K39, K3A, KC_NO, KC_NO}, \
}
-
-
-#endif
diff --git a/keyboards/pearl/readme.md b/keyboards/pearl/readme.md
new file mode 100644
index 0000000000..c39d86cf3d
--- /dev/null
+++ b/keyboards/pearl/readme.md
@@ -0,0 +1,47 @@
+# Pearl 40%
+
+Pearl 40% is a keyboard designed by Koobaczech. It uses an Atmel
+ATMEGA32A MCU.
+
+Keyboard Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo)
+Hardware Supported: Pearl
+Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=92259.0)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make pearl:default
+
+Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
+
+**Reset Key:** Hold down the key located at `K00`.
+
+Windows:
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset.
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete.
+
+macOS:
+1. Install homebrew by typing the following:
+ ```
+ /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+ ```
+2. Install `crosspack-avr`.
+ ```
+ brew cask install crosspack-avr
+ ```
+3. Install the following packages:
+ ```
+ brew install python3
+ pip3 install pyusb
+ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+ ```
+4. Place your keyboard into reset.
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
+
+**Please Note:** You will need to use the `EEP_RST` keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/pearl/rules.mk b/keyboards/pearl/rules.mk
index fac85172ec..4db92d1219 100644
--- a/keyboards/pearl/rules.mk
+++ b/keyboards/pearl/rules.mk
@@ -31,7 +31,7 @@ F_CPU = 12000000
BOOTLOADER = bootloadHID
# build options
-BOOTMAGIC_ENABLE = full
+BOOTMAGIC_ENABLE = no
MOUSEKEY_ENABLE = no
EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = yes
@@ -43,8 +43,7 @@ RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
-CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
+SRC = i2c_master.c
# programming options
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
diff --git a/keyboards/pearl/usbconfig.h b/keyboards/pearl/usbconfig.h
index d2d848fcdc..54a7d20f14 100644
--- a/keyboards/pearl/usbconfig.h
+++ b/keyboards/pearl/usbconfig.h
@@ -8,8 +8,7 @@
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
*/
-#ifndef __usbconfig_h_included__
-#define __usbconfig_h_included__
+#pragma once
#include "config.h"
@@ -392,5 +391,3 @@ section at the end of this file).
/* #define USB_INTR_PENDING EIFR */
#define USB_INTR_PENDING_BIT INTF1
#define USB_INTR_VECTOR INT1_vect
-
-#endif /* __usbconfig_h_included__ */