summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/avr/ws2812.c20
-rw-r--r--drivers/chibios/ws2812.c2
-rw-r--r--drivers/chibios/ws2812.h16
-rw-r--r--drivers/chibios/ws2812_pwm.c7
-rw-r--r--drivers/chibios/ws2812_spi.c2
-rw-r--r--drivers/ws2812.h (renamed from drivers/avr/ws2812.h)18
6 files changed, 19 insertions, 46 deletions
diff --git a/drivers/avr/ws2812.c b/drivers/avr/ws2812.c
index 5c3d72dcb5..dd2ef89912 100644
--- a/drivers/avr/ws2812.c
+++ b/drivers/avr/ws2812.c
@@ -36,25 +36,15 @@
static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t masklo, uint8_t maskhi);
-// Setleds for standard RGB
-void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) {
- // wrap up usage of RGB_DI_PIN
- ws2812_setleds_pin(ledarray, number_of_leds, RGB_DI_PIN);
-}
-
-void ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pin) {
- DDRx_ADDRESS(RGB_DI_PIN) |= pinmask(pin);
+void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) {
+ DDRx_ADDRESS(RGB_DI_PIN) |= pinmask(RGB_DI_PIN);
- uint8_t masklo = ~(pinmask(pin)) & PORTx_ADDRESS(pin);
- uint8_t maskhi = pinmask(pin) | PORTx_ADDRESS(pin);
+ uint8_t masklo = ~(pinmask(RGB_DI_PIN)) & PORTx_ADDRESS(RGB_DI_PIN);
+ uint8_t maskhi = pinmask(RGB_DI_PIN) | PORTx_ADDRESS(RGB_DI_PIN);
ws2812_sendarray_mask((uint8_t *)ledarray, number_of_leds * sizeof(LED_TYPE), masklo, maskhi);
-#ifdef RGBW
- _delay_us(80);
-#else
- _delay_us(50);
-#endif
+ _delay_us(WS2812_TRST_US);
}
/*
diff --git a/drivers/chibios/ws2812.c b/drivers/chibios/ws2812.c
index 1824806939..c2bec3fdc9 100644
--- a/drivers/chibios/ws2812.c
+++ b/drivers/chibios/ws2812.c
@@ -51,7 +51,7 @@
// The reset gap can be 6000 ns, but depending on the LED strip it may have to be increased
// to values like 600000 ns. If it is too small, the pixels will show nothing most of the time.
-#define RES 10000 // Width of the low gap between bits to cause a frame to latch
+#define RES (1000 * WS2812_TRST_US) // Width of the low gap between bits to cause a frame to latch
void sendByte(uint8_t byte) {
// WS2812 protocol wants most significant bits first
diff --git a/drivers/chibios/ws2812.h b/drivers/chibios/ws2812.h
deleted file mode 100644
index 41c22a00b8..0000000000
--- a/drivers/chibios/ws2812.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#pragma once
-
-#include "quantum/color.h"
-
-/* User Interface
- *
- * Input:
- * ledarray: An array of GRB data describing the LED colors
- * number_of_leds: The number of LEDs to write
- *
- * The functions will perform the following actions:
- * - Set the data-out pin as output
- * - Send out the LED data
- * - Wait 50us to reset the LEDs
- */
-void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
diff --git a/drivers/chibios/ws2812_pwm.c b/drivers/chibios/ws2812_pwm.c
index ba45d00425..7113db11e0 100644
--- a/drivers/chibios/ws2812_pwm.c
+++ b/drivers/chibios/ws2812_pwm.c
@@ -53,11 +53,10 @@
/**
* @brief Number of bit-periods to hold the data line low at the end of a frame
*
- * The reset period for each frame must be at least 50 uS; so we add in 50 bit-times
- * of zeroes at the end. (50 bits)*(1.25 uS/bit) = 62.5 uS, which gives us some
- * slack in the timing requirements
+ * The reset period for each frame is defined in WS2812_TRST_US.
+ * Calculate the number of zeroes to add at the end assuming 1.25 uS/bit:
*/
-#define WS2812_RESET_BIT_N (50)
+#define WS2812_RESET_BIT_N (1000 * WS2812_TRST_US / 1250)
#define WS2812_COLOR_BIT_N (RGBLED_NUM * 24) /**< Number of data bits */
#define WS2812_BIT_N (WS2812_COLOR_BIT_N + WS2812_RESET_BIT_N) /**< Total number of bits in a frame */
diff --git a/drivers/chibios/ws2812_spi.c b/drivers/chibios/ws2812_spi.c
index 3bbada7fef..7a1d2f05da 100644
--- a/drivers/chibios/ws2812_spi.c
+++ b/drivers/chibios/ws2812_spi.c
@@ -36,7 +36,7 @@
#define NB_COLORS 3
#define BYTES_FOR_LED (BYTES_FOR_LED_BYTE * NB_COLORS)
#define DATA_SIZE (BYTES_FOR_LED * RGBLED_NUM)
-#define RESET_SIZE 200
+#define RESET_SIZE (1000 * WS2812_TRST_US / (2 * 1250))
#define PREAMBLE_SIZE 4
static uint8_t txbuf[PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE] = {0};
diff --git a/drivers/avr/ws2812.h b/drivers/ws2812.h
index 88eb081894..370b14f3e8 100644
--- a/drivers/avr/ws2812.h
+++ b/drivers/ws2812.h
@@ -1,11 +1,4 @@
/*
- * light weight WS2812 lib include
- *
- * Version 2.3 - Nev 29th 2015
- * Author: Tim (cpldcpu@gmail.com)
- *
- * Please do not change this file! All configuration is handled in "ws2812_config.h"
- *
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
@@ -24,12 +17,20 @@
#include "quantum/color.h"
+/*
+ * Older WS2812s can handle a reset time (TRST) of 50us, but recent
+ * component revisions require a minimum of 280us.
+ */
+
+#if !defined(WS2812_TRST_US)
+#define WS2812_TRST_US 280
+#endif
+
/* User Interface
*
* Input:
* ledarray: An array of GRB data describing the LED colors
* number_of_leds: The number of LEDs to write
- * pin (optional): A pin_t definition for the line to drive
*
* The functions will perform the following actions:
* - Set the data-out pin as output
@@ -37,4 +38,3 @@
* - Wait 50us to reset the LEDs
*/
void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
-void ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pin);