Remove iWRAP protocol (#9284)

1 files changed, 0 insertions, 161 deletions

diff --git a/tmk_core/protocol/iwrap/wd.h b/tmk_core/protocol/iwrap/wd.h
deleted file mode 100644
index 083d6d44d6..0000000000
--- a/tmk_core/protocol/iwrap/wd.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/* This is from http://www.mtcnet.net/~henryvm/wdt/ */
-#ifndef _AVR_WD_H_
-#define _AVR_WD_H_
-
-#include <avr/io.h>
-
-/*
-Copyright (c) 2009, Curt Van Maanen
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
-
-include usage-
-    #include "wd.h"             //if in same directory as project
-    #include <avr/wd.h>         //if wd.h is in avr directory
-
-set watchdog modes and prescale
-
-usage-
-    WD_SET(mode,[timeout]);     //prescale always set
-
-modes-
-    WD_OFF                      disabled
-    WD_RST                      normal reset mode
-    WD_IRQ                      interrupt only mode (if supported)
-    WD_RST_IRQ                  interrupt+reset mode (if supported)
-
-timeout-
-    WDTO_15MS                   default if no timeout provided
-    WDTO_30MS
-    WDTO_60MS
-    WDTO_120MS
-    WDTO_250MS
-    WDTO_500MS
-    WDTO_1S
-    WDTO_2S
-    WDTO_4S                     (if supported)
-    WDTO_8S                     (if supported)
-
-examples-
-    WD_SET(WD_RST,WDTO_1S);     //reset mode, 1s timeout
-    WD_SET(WD_OFF);             //watchdog disabled (if not fused on)
-    WD_SET(WD_RST);             //reset mode, 15ms (default timeout)
-    WD_SET(WD_IRQ,WDTO_120MS);  //interrupt only mode, 120ms timeout
-    WD_SET(WD_RST_IRQ,WDTO_2S); //interrupt+reset mode, 2S timeout
-
-
-for enhanced watchdogs, if the watchdog is not being used WDRF should be
-cleared on every power up or reset, along with disabling the watchdog-
-    WD_DISABLE();               //clear WDRF, then turn off watchdog
-
-*/
-
-// reset registers to the same name (MCUCSR)
-#if !defined(MCUCSR)
-#    define MCUCSR MCUSR
-#endif
-
-// watchdog registers to the same name (WDTCSR)
-#if !defined(WDTCSR)
-#    define WDTCSR WDTCR
-#endif
-
-// if enhanced watchdog, define irq values, create disable macro
-#if defined(WDIF)
-#    define WD_IRQ 0xC0
-#    define WD_RST_IRQ 0xC8
-#    define WD_DISABLE()            \
-        do {                        \
-            MCUCSR &= ~(1 << WDRF); \
-            WD_SET(WD_OFF);         \
-        } while (0)
-#endif
-
-// all watchdogs
-#define WD_RST 8
-#define WD_OFF 0
-
-// prescale values
-#define WDTO_15MS 0
-#define WDTO_30MS 1
-#define WDTO_60MS 2
-#define WDTO_120MS 3
-#define WDTO_250MS 4
-#define WDTO_500MS 5
-#define WDTO_1S 6
-#define WDTO_2S 7
-
-// prescale values for avrs with WDP3
-#if defined(WDP3)
-#    define WDTO_4S 0x20
-#    define WDTO_8S 0x21
-#endif
-
-// watchdog reset
-#define WDR() __asm__ __volatile__("wdr")
-
-// avr reset using watchdog
-#define WD_AVR_RESET()               \
-    do {                             \
-        __asm__ __volatile__("cli"); \
-        WD_SET_UNSAFE(WD_RST);       \
-        while (1)                    \
-            ;                        \
-    } while (0)
-
-/*set the watchdog-
-1. save SREG
-2. turn off irq's
-3. reset watchdog timer
-4. enable watchdog change
-5. write watchdog value
-6. restore SREG (restoring irq status)
-*/
-#define WD_SET(val, ...)                                                                                                            \
-    __asm__ __volatile__("in __tmp_reg__,__SREG__"                                                                                  \
-                         "\n\t"                                                                                                     \
-                         "cli"                                                                                                      \
-                         "\n\t"                                                                                                     \
-                         "wdr"                                                                                                      \
-                         "\n\t"                                                                                                     \
-                         "sts %[wdreg],%[wden]"                                                                                     \
-                         "\n\t"                                                                                                     \
-                         "sts %[wdreg],%[wdval]"                                                                                    \
-                         "\n\t"                                                                                                     \
-                         "out __SREG__,__tmp_reg__"                                                                                 \
-                         "\n\t"                                                                                                     \
-                         :                                                                                                          \
-                         : [ wdreg ] "M"(&WDTCSR), [ wden ] "r"((uint8_t)(0x18)), [ wdval ] "r"((uint8_t)(val | (__VA_ARGS__ + 0))) \
-                         : "r0")
-
-/*set the watchdog when I bit in SREG known to be clear-
-1. reset watchdog timer
-2. enable watchdog change
-5. write watchdog value
-*/
-#define WD_SET_UNSAFE(val, ...)                  \
-    __asm__ __volatile__("wdr"                   \
-                         "\n\t"                  \
-                         "sts %[wdreg],%[wden]"  \
-                         "\n\t"                  \
-                         "sts %[wdreg],%[wdval]" \
-                         "\n\t"                  \
-                         :                       \
-                         : [ wdreg ] "M"(&WDTCSR), [ wden ] "r"((uint8_t)(0x18)), [ wdval ] "r"((uint8_t)(val | (__VA_ARGS__ + 0))))
-
-// for compatibility with avr/wdt.h
-#define wdt_enable(val) WD_SET(WD_RST, val)
-#define wdt_disable() WD_SET(WD_OFF)
-
-#endif /* _AVR_WD_H_ */