clang-format changes

1 files changed, 73 insertions, 73 deletions

diff --git a/tmk_core/protocol/arm_atsam/led_matrix.h b/tmk_core/protocol/arm_atsam/led_matrix.h
index 1316efd9a4..8eaa5623bd 100644
--- a/tmk_core/protocol/arm_atsam/led_matrix.h
+++ b/tmk_core/protocol/arm_atsam/led_matrix.h
@@ -20,20 +20,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "quantum.h"
 
-//From keyboard
+// From keyboard
 #include "config_led.h"
 
-//CS1-CS16 Current Source "Col"
+// CS1-CS16 Current Source "Col"
 #define ISSI3733_CS_COUNT 16
 
-//SW1-SW12 Switch "Row"
+// SW1-SW12 Switch "Row"
 #define ISSI3733_SW_COUNT 12
 
-#define ISSI3733_LED_RGB_COUNT ISSI3733_CS_COUNT * ISSI3733_SW_COUNT
-#define ISSI3733_PG0_BYTES ISSI3733_LED_RGB_COUNT / 8 + 1       //+1 for first byte being memory start offset for I2C transfer
-#define ISSI3733_PG1_BYTES ISSI3733_LED_RGB_COUNT + 1           //+1 for first byte being memory start offset for I2C transfer
-#define ISSI3733_PG2_BYTES ISSI3733_LED_RGB_COUNT + 1           //+1 for first byte being memory start offset for I2C transfer
-#define ISSI3733_PG3_BYTES 18 + 1                               //+1 for first byte being memory start offset for I2C transfer
+#define ISSI3733_LED_RGB_COUNT ISSI3733_CS_COUNT *ISSI3733_SW_COUNT
+#define ISSI3733_PG0_BYTES ISSI3733_LED_RGB_COUNT / 8 + 1  //+1 for first byte being memory start offset for I2C transfer
+#define ISSI3733_PG1_BYTES ISSI3733_LED_RGB_COUNT + 1      //+1 for first byte being memory start offset for I2C transfer
+#define ISSI3733_PG2_BYTES ISSI3733_LED_RGB_COUNT + 1      //+1 for first byte being memory start offset for I2C transfer
+#define ISSI3733_PG3_BYTES 18 + 1                          //+1 for first byte being memory start offset for I2C transfer
 
 #define ISSI3733_PG_ONOFF_BYTES ISSI3733_PG0_BYTES
 #define ISSI3733_PG_OR_BYTES ISSI3733_PG0_BYTES
@@ -43,38 +43,38 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ISSI3733_PG_FN_BYTES ISSI3733_PG3_BYTES
 
 typedef struct issi3733_driver_s {
-    uint8_t addr; //Address of the driver according to wiring "ISSI3733: Table 1 Slave Address"
-    uint8_t onoff[ISSI3733_PG_ONOFF_BYTES]; //PG0 - LED Control Register - LED On/Off Register
-    uint8_t open[ISSI3733_PG_OR_BYTES];     //PG0 - LED Control Register - LED Open Register
-    uint8_t shrt[ISSI3733_PG_SR_BYTES];     //PG0 - LED Control Register - LED Short Register
-    uint8_t pwm[ISSI3733_PG_PWM_BYTES];     //PG1 - PWM Register
-    uint8_t abm[ISSI3733_PG_ABM_BYTES];     //PG2 - Auto Breath Mode Register
-    uint8_t conf[ISSI3733_PG_FN_BYTES];     //PG3 - Function Register
+    uint8_t addr;                            // Address of the driver according to wiring "ISSI3733: Table 1 Slave Address"
+    uint8_t onoff[ISSI3733_PG_ONOFF_BYTES];  // PG0 - LED Control Register - LED On/Off Register
+    uint8_t open[ISSI3733_PG_OR_BYTES];      // PG0 - LED Control Register - LED Open Register
+    uint8_t shrt[ISSI3733_PG_SR_BYTES];      // PG0 - LED Control Register - LED Short Register
+    uint8_t pwm[ISSI3733_PG_PWM_BYTES];      // PG1 - PWM Register
+    uint8_t abm[ISSI3733_PG_ABM_BYTES];      // PG2 - Auto Breath Mode Register
+    uint8_t conf[ISSI3733_PG_FN_BYTES];      // PG3 - Function Register
 } issi3733_driver_t;
 
 typedef struct issi3733_rgb_s {
-    uint8_t *r;         //Direct access into PWM data
-    uint8_t *g;         //Direct access into PWM data
-    uint8_t *b;         //Direct access into PWM data
+    uint8_t *r;  // Direct access into PWM data
+    uint8_t *g;  // Direct access into PWM data
+    uint8_t *b;  // Direct access into PWM data
 } issi3733_rgb_t;
 
 typedef struct issi3733_rgb_adr_s {
-    uint8_t drv;        //Driver from given list
-    uint8_t cs;         //CS
-    uint8_t swr;        //SW Red
-    uint8_t swg;        //SW Green
-    uint8_t swb;        //SW Blue
+    uint8_t drv;  // Driver from given list
+    uint8_t cs;   // CS
+    uint8_t swr;  // SW Red
+    uint8_t swg;  // SW Green
+    uint8_t swb;  // SW Blue
 } issi3733_rgb_adr_t;
 
 typedef struct issi3733_led_s {
-    uint8_t id;                 //According to PCB ref
-    issi3733_rgb_t rgb;         //PWM settings of R G B
-    issi3733_rgb_adr_t adr;     //Hardware addresses
-    float x;                    //Physical position X
-    float y;                    //Physical position Y
-    float px;                   //Physical position X in percent
-    float py;                   //Physical position Y in percent
-    uint8_t scan;               //Key scan code from wiring (set 0xFF if no key)
+    uint8_t            id;    // According to PCB ref
+    issi3733_rgb_t     rgb;   // PWM settings of R G B
+    issi3733_rgb_adr_t adr;   // Hardware addresses
+    float              x;     // Physical position X
+    float              y;     // Physical position Y
+    float              px;    // Physical position X in percent
+    float              py;    // Physical position Y in percent
+    uint8_t            scan;  // Key scan code from wiring (set 0xFF if no key)
 } issi3733_led_t;
 
 extern issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT];
@@ -92,67 +92,67 @@ void led_matrix_indicators(void);
 
 #ifdef USE_MASSDROP_CONFIGURATOR
 
-#define EF_NONE         0x00000000  //No effect
-#define EF_OVER         0x00000001  //Overwrite any previous color information with new
-#define EF_SCR_L        0x00000002  //Scroll left
-#define EF_SCR_R        0x00000004  //Scroll right
-#define EF_SUBTRACT     0x00000008  //Subtract color values
+#    define EF_NONE 0x00000000      // No effect
+#    define EF_OVER 0x00000001      // Overwrite any previous color information with new
+#    define EF_SCR_L 0x00000002     // Scroll left
+#    define EF_SCR_R 0x00000004     // Scroll right
+#    define EF_SUBTRACT 0x00000008  // Subtract color values
 
 typedef struct led_setup_s {
-  float hs;         //Band begin at percent
-  float he;         //Band end at percent
-  uint8_t rs;       //Red start value
-  uint8_t re;       //Red end value
-  uint8_t gs;       //Green start value
-  uint8_t ge;       //Green end value
-  uint8_t bs;       //Blue start value
-  uint8_t be;       //Blue end value
-  uint32_t ef;      //Animation and color effects
-  uint8_t end;      //Set to signal end of the setup
+    float    hs;   // Band begin at percent
+    float    he;   // Band end at percent
+    uint8_t  rs;   // Red start value
+    uint8_t  re;   // Red end value
+    uint8_t  gs;   // Green start value
+    uint8_t  ge;   // Green end value
+    uint8_t  bs;   // Blue start value
+    uint8_t  be;   // Blue end value
+    uint32_t ef;   // Animation and color effects
+    uint8_t  end;  // Set to signal end of the setup
 } led_setup_t;
 
 extern const uint8_t led_setups_count;
-extern void *led_setups[];
+extern void *        led_setups[];
 
-//LED Extra Instructions
-#define LED_FLAG_NULL                0x00       //Matching and coloring not used (default)
-#define LED_FLAG_MATCH_ID            0x01       //Match on the ID of the LED (set id#'s to desired bit pattern, first LED is id 1)
-#define LED_FLAG_MATCH_LAYER         0x02       //Match on the current active layer (set layer to desired match layer)
-#define LED_FLAG_USE_RGB             0x10       //Use a specific RGB value (set r, g, b to desired output color values)
-#define LED_FLAG_USE_PATTERN         0x20       //Use a specific pattern ID (set pattern_id to desired output pattern)
-#define LED_FLAG_USE_ROTATE_PATTERN  0x40       //Use pattern the user has cycled to manually
+// LED Extra Instructions
+#    define LED_FLAG_NULL 0x00                // Matching and coloring not used (default)
+#    define LED_FLAG_MATCH_ID 0x01            // Match on the ID of the LED (set id#'s to desired bit pattern, first LED is id 1)
+#    define LED_FLAG_MATCH_LAYER 0x02         // Match on the current active layer (set layer to desired match layer)
+#    define LED_FLAG_USE_RGB 0x10             // Use a specific RGB value (set r, g, b to desired output color values)
+#    define LED_FLAG_USE_PATTERN 0x20         // Use a specific pattern ID (set pattern_id to desired output pattern)
+#    define LED_FLAG_USE_ROTATE_PATTERN 0x40  // Use pattern the user has cycled to manually
 
 typedef struct led_instruction_s {
-    uint16_t flags; // Bitfield for LED instructions
-    uint32_t id0; // Bitwise id, IDs 0-31
-    uint32_t id1; // Bitwise id, IDs 32-63
-    uint32_t id2; // Bitwise id, IDs 64-95
-    uint32_t id3; // Bitwise id, IDs 96-127
-    uint8_t layer;
-    uint8_t r;
-    uint8_t g;
-    uint8_t b;
-    uint8_t pattern_id;
-    uint8_t end;
+    uint16_t flags;  // Bitfield for LED instructions
+    uint32_t id0;    // Bitwise id, IDs 0-31
+    uint32_t id1;    // Bitwise id, IDs 32-63
+    uint32_t id2;    // Bitwise id, IDs 64-95
+    uint32_t id3;    // Bitwise id, IDs 96-127
+    uint8_t  layer;
+    uint8_t  r;
+    uint8_t  g;
+    uint8_t  b;
+    uint8_t  pattern_id;
+    uint8_t  end;
 } led_instruction_t;
 
 extern led_instruction_t led_instructions[];
 
 extern uint8_t led_animation_breathing;
 extern uint8_t led_animation_id;
-extern float led_animation_speed;
+extern float   led_animation_speed;
 extern uint8_t led_lighting_mode;
 extern uint8_t led_enabled;
 extern uint8_t led_animation_breathe_cur;
 extern uint8_t led_animation_direction;
 extern uint8_t breathe_dir;
 
-#define LED_MODE_NORMAL             0   //Must be 0
-#define LED_MODE_KEYS_ONLY          1
-#define LED_MODE_NON_KEYS_ONLY      2
-#define LED_MODE_INDICATORS_ONLY    3
-#define LED_MODE_MAX_INDEX          LED_MODE_INDICATORS_ONLY   //Must be highest value
+#    define LED_MODE_NORMAL 0  // Must be 0
+#    define LED_MODE_KEYS_ONLY 1
+#    define LED_MODE_NON_KEYS_ONLY 2
+#    define LED_MODE_INDICATORS_ONLY 3
+#    define LED_MODE_MAX_INDEX LED_MODE_INDICATORS_ONLY  // Must be highest value
 
-#endif // USE_MASSDROP_CONFIGURATOR
+#endif  // USE_MASSDROP_CONFIGURATOR
 
-#endif //_LED_MATRIX_H_
+#endif  //_LED_MATRIX_H_