2020 November 28 Breaking Changes Update (#11053)

* Branch point for 2020 November 28 Breaking Change

* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)

* Add support for soft serial to ATmega32U2 (#10204)

* Change MIDI velocity implementation to allow direct control of velocity value (#9940)

* Add ability to build a subset of all keyboards based on platform.

* Actually use eeprom_driver_init().

* Make bootloader_jump weak for ChibiOS. (#10417)

* Joystick 16-bit support (#10439)

* Per-encoder resolutions (#10259)

* Share button state from mousekey to pointing_device (#10179)

* Add hotfix for chibios keyboards not wake (#10088)

* Add advanced/efficient RGB Matrix Indicators (#8564)

* Naming change.

* Support for STM32 GPIOF,G,H,I,J,K (#10206)

* Add milc as a dependency and remove the installed milc (#10563)

* ChibiOS upgrade: early init conversions (#10214)

* ChibiOS upgrade: configuration file migrator (#9952)

* Haptic and solenoid cleanup (#9700)

* XD75 cleanup (#10524)

* OLED display update interval support (#10388)

* Add definition based on currently-selected serial driver. (#10716)

* New feature: Retro Tapping per key (#10622)

* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)

* Rescale both ChibiOS and AVR backlighting.

* Reduce Helix keyboard build variation (#8669)

* Minor change to behavior allowing display updates to continue between task ticks (#10750)

* Some GPIO manipulations in matrix.c change to atomic. (#10491)

* qmk cformat (#10767)

* [Keyboard] Update the Speedo firmware for v3.0 (#10657)

* Maartenwut/Maarten namechange to evyd13/Evy (#10274)

* [quantum] combine repeated lines of code (#10837)

* Add step sequencer feature (#9703)

* aeboards/ext65 refactor (#10820)

* Refactor xelus/dawn60 for Rev2 later (#10584)

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)

* update chibios os usb for the otg driver (#8893)

* Remove HD44780 References, Part 4 (#10735)

* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)

* Fix cursor position bug in oled_write_raw functions (#10800)

* Fixup version.h writing when using SKIP_VERSION=yes (#10972)

* Allow for certain code in the codebase assuming length of string. (#10974)

* Add AT90USB support for serial.c (#10706)

* Auto shift: support repeats and early registration (#9826)

* Rename ledmatrix.h to match .c file (#7949)

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)

* Merge point for 2020 Nov 28 Breaking Change

5 files changed, 199 insertions, 659 deletions

diff --git a/platforms/chibios/GENERIC_STM32_F072XB/board/board.c b/platforms/chibios/GENERIC_STM32_F072XB/board/board.c
deleted file mode 100644
index c91136e8f6..0000000000
--- a/platforms/chibios/GENERIC_STM32_F072XB/board/board.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#include "hal.h"
-#include "stm32_gpio.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types.                                         */
-/*===========================================================================*/
-
-/**
- * @brief   Type of STM32 GPIO port setup.
- */
-typedef struct {
-    uint32_t moder;
-    uint32_t otyper;
-    uint32_t ospeedr;
-    uint32_t pupdr;
-    uint32_t odr;
-    uint32_t afrl;
-    uint32_t afrh;
-} gpio_setup_t;
-
-/**
- * @brief   Type of STM32 GPIO initialization data.
- */
-typedef struct {
-#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
-    gpio_setup_t PAData;
-#endif
-#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
-    gpio_setup_t PBData;
-#endif
-#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
-    gpio_setup_t PCData;
-#endif
-#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
-    gpio_setup_t PDData;
-#endif
-#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
-    gpio_setup_t PEData;
-#endif
-#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
-    gpio_setup_t PFData;
-#endif
-#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
-    gpio_setup_t PGData;
-#endif
-#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
-    gpio_setup_t PHData;
-#endif
-#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
-    gpio_setup_t PIData;
-#endif
-#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
-    gpio_setup_t PJData;
-#endif
-#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
-    gpio_setup_t PKData;
-#endif
-} gpio_config_t;
-
-/**
- * @brief   STM32 GPIO static initialization data.
- */
-static const gpio_config_t gpio_default_config = {
-#if STM32_HAS_GPIOA
-    {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-    {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-    {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-    {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-    {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-    {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-    {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-    {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-    {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
-#endif
-#if STM32_HAS_GPIOJ
-    {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
-#endif
-#if STM32_HAS_GPIOK
-    {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
-#endif
-};
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
-    gpiop->OTYPER  = config->otyper;
-    gpiop->OSPEEDR = config->ospeedr;
-    gpiop->PUPDR   = config->pupdr;
-    gpiop->ODR     = config->odr;
-    gpiop->AFRL    = config->afrl;
-    gpiop->AFRH    = config->afrh;
-    gpiop->MODER   = config->moder;
-}
-
-static void stm32_gpio_init(void) {
-    /* Enabling GPIO-related clocks, the mask comes from the
-       registry header file.*/
-    rccResetAHB(STM32_GPIO_EN_MASK);
-    rccEnableAHB(STM32_GPIO_EN_MASK, true);
-
-    /* Initializing all the defined GPIO ports.*/
-#if STM32_HAS_GPIOA
-    gpio_init(GPIOA, &gpio_default_config.PAData);
-#endif
-#if STM32_HAS_GPIOB
-    gpio_init(GPIOB, &gpio_default_config.PBData);
-#endif
-#if STM32_HAS_GPIOC
-    gpio_init(GPIOC, &gpio_default_config.PCData);
-#endif
-#if STM32_HAS_GPIOD
-    gpio_init(GPIOD, &gpio_default_config.PDData);
-#endif
-#if STM32_HAS_GPIOE
-    gpio_init(GPIOE, &gpio_default_config.PEData);
-#endif
-#if STM32_HAS_GPIOF
-    gpio_init(GPIOF, &gpio_default_config.PFData);
-#endif
-#if STM32_HAS_GPIOG
-    gpio_init(GPIOG, &gpio_default_config.PGData);
-#endif
-#if STM32_HAS_GPIOH
-    gpio_init(GPIOH, &gpio_default_config.PHData);
-#endif
-#if STM32_HAS_GPIOI
-    gpio_init(GPIOI, &gpio_default_config.PIData);
-#endif
-#if STM32_HAS_GPIOJ
-    gpio_init(GPIOJ, &gpio_default_config.PJData);
-#endif
-#if STM32_HAS_GPIOK
-    gpio_init(GPIOK, &gpio_default_config.PKData);
-#endif
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {}
-
-/**
- * @brief   Early initialization code.
- * @details GPIO ports and system clocks are initialized before everything
- *          else.
- */
-void __early_init(void) {
-    enter_bootloader_mode_if_requested();
-
-    stm32_gpio_init();
-    stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-    (void)sdcp;
-    /* TODO: Fill the implementation.*/
-    return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-    (void)sdcp;
-    /* TODO: Fill the implementation.*/
-    return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-    (void)mmcp;
-    /* TODO: Fill the implementation.*/
-    return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-    (void)mmcp;
-    /* TODO: Fill the implementation.*/
-    return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {}
diff --git a/platforms/chibios/GENERIC_STM32_F072XB/board/board.h b/platforms/chibios/GENERIC_STM32_F072XB/board/board.h
deleted file mode 100644
index 87570e62d2..0000000000
--- a/platforms/chibios/GENERIC_STM32_F072XB/board/board.h
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#ifndef BOARD_H
-#define BOARD_H
-
-/*===========================================================================*/
-/* Driver constants.                                                         */
-/*===========================================================================*/
-
-/*
- * Setup for Generic STM32_F072 Board
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_GENERIC_STM32_F072XB
-#define BOARD_NAME "STM32_F072"
-
-/*
- * Board oscillators-related settings.
- * NOTE: LSE not fitted.
- * NOTE: HSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#    define STM32_LSECLK 0U
-#endif
-
-#define STM32_LSEDRV (3U << 3U)
-
-#if !defined(STM32_HSECLK)
-#    define STM32_HSECLK 0U
-#endif
-
-#define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F072xB
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON 0U
-#define GPIOA_PIN1 1U
-#define GPIOA_PIN2 2U
-#define GPIOA_PIN3 3U
-#define GPIOA_PIN4 4U
-#define GPIOA_PIN5 5U
-#define GPIOA_PIN6 6U
-#define GPIOA_PIN7 7U
-#define GPIOA_PIN8 8U
-#define GPIOA_PIN9 9U
-#define GPIOA_PIN10 10U
-#define GPIOA_USB_DM 11U
-#define GPIOA_USB_DP 12U
-#define GPIOA_SWDIO 13U
-#define GPIOA_SWCLK 14U
-#define GPIOA_PIN15 15U
-
-#define GPIOB_PIN0 0U
-#define GPIOB_PIN1 1U
-#define GPIOB_PIN2 2U
-#define GPIOB_PIN3 3U
-#define GPIOB_PIN4 4U
-#define GPIOB_PIN5 5U
-#define GPIOB_PIN6 6U
-#define GPIOB_PIN7 7U
-#define GPIOB_PIN8 8U
-#define GPIOB_PIN9 9U
-#define GPIOB_PIN10 10U
-#define GPIOB_PIN11 11U
-#define GPIOB_PIN12 12U
-#define GPIOB_SPI2_SCK 13U
-#define GPIOB_SPI2_MISO 14U
-#define GPIOB_SPI2_MOSI 15U
-
-#define GPIOC_MEMS_CS 0U
-#define GPIOC_PIN1 1U
-#define GPIOC_PIN2 2U
-#define GPIOC_PIN3 3U
-#define GPIOC_PIN4 4U
-#define GPIOC_PIN5 5U
-#define GPIOC_LED_RED 6U
-#define GPIOC_LED_BLUE 7U
-#define GPIOC_LED_ORANGE 8U
-#define GPIOC_LED_GREEN 9U
-#define GPIOC_PIN10 10U
-#define GPIOC_PIN11 11U
-#define GPIOC_PIN12 12U
-#define GPIOC_PIN13 13U
-#define GPIOC_OSC32_IN 14U
-#define GPIOC_OSC32_OUT 15U
-
-#define GPIOD_PIN0 0U
-#define GPIOD_PIN1 1U
-#define GPIOD_PIN2 2U
-#define GPIOD_PIN3 3U
-#define GPIOD_PIN4 4U
-#define GPIOD_PIN5 5U
-#define GPIOD_PIN6 6U
-#define GPIOD_PIN7 7U
-#define GPIOD_PIN8 8U
-#define GPIOD_PIN9 9U
-#define GPIOD_PIN10 10U
-#define GPIOD_PIN11 11U
-#define GPIOD_PIN12 12U
-#define GPIOD_PIN13 13U
-#define GPIOD_PIN14 14U
-#define GPIOD_PIN15 15U
-
-#define GPIOE_PIN0 0U
-#define GPIOE_PIN1 1U
-#define GPIOE_PIN2 2U
-#define GPIOE_PIN3 3U
-#define GPIOE_PIN4 4U
-#define GPIOE_PIN5 5U
-#define GPIOE_PIN6 6U
-#define GPIOE_PIN7 7U
-#define GPIOE_PIN8 8U
-#define GPIOE_PIN9 9U
-#define GPIOE_PIN10 10U
-#define GPIOE_PIN11 11U
-#define GPIOE_PIN12 12U
-#define GPIOE_PIN13 13U
-#define GPIOE_PIN14 14U
-#define GPIOE_PIN15 15U
-
-#define GPIOF_OSC_IN 0U
-#define GPIOF_OSC_OUT 1U
-#define GPIOF_PIN2 2U
-#define GPIOF_PIN3 3U
-#define GPIOF_PIN4 4U
-#define GPIOF_PIN5 5U
-#define GPIOF_PIN6 6U
-#define GPIOF_PIN7 7U
-#define GPIOF_PIN8 8U
-#define GPIOF_PIN9 9U
-#define GPIOF_PIN10 10U
-#define GPIOF_PIN11 11U
-#define GPIOF_PIN12 12U
-#define GPIOF_PIN13 13U
-#define GPIOF_PIN14 14U
-#define GPIOF_PIN15 15U
-
-/*
- * IO lines assignments.
- */
-#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
-#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
-#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
-#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
-#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
-#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
-#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
-#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
-#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
-#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
-#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
-#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
-#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
-#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
-#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
-
-/*===========================================================================*/
-/* Driver pre-compile time settings.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Derived constants and error checks.                                       */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver macros.                                                            */
-/*===========================================================================*/
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n)*2U))
-#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U))
-#define PIN_MODE_ANALOG(n) (3U << ((n)*2U))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U))
-#define PIN_OSPEED_LOW(n) (1U << ((n)*2U))
-#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U))
-#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U))
-#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
-
-/*
- * GPIOA setup:
- *
- * PA0  - BUTTON                    (input floating).
- * PA1  - PIN1                      (input pullup).
- * PA2  - PIN2                      (input pullup).
- * PA3  - PIN3                      (input pullup).
- * PA4  - PIN4                      (input pullup).
- * PA5  - PIN5                      (input pullup).
- * PA6  - PIN6                      (input pullup).
- * PA7  - PIN7                      (input pullup).
- * PA8  - PIN8                      (input pullup).
- * PA9  - PIN9                      (input pullup).
- * PA10 - PIN10                     (input pullup).
- * PA11 - USB_DM                    (input floating).
- * PA12 - USB_DP                    (input floating).
- * PA13 - SWDIO                     (alternate 0).
- * PA14 - SWCLK                     (alternate 0).
- * PA15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | PIN_MODE_INPUT(GPIOA_PIN1) | PIN_MODE_INPUT(GPIOA_PIN2) | PIN_MODE_INPUT(GPIOA_PIN3) | PIN_MODE_INPUT(GPIOA_PIN4) | PIN_MODE_INPUT(GPIOA_PIN5) | PIN_MODE_INPUT(GPIOA_PIN6) | PIN_MODE_INPUT(GPIOA_PIN7) | PIN_MODE_INPUT(GPIOA_PIN8) | PIN_MODE_INPUT(GPIOA_PIN9) | PIN_MODE_INPUT(GPIOA_PIN10) | PIN_MODE_INPUT(GPIOA_USB_DM) | PIN_MODE_INPUT(GPIOA_USB_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | PIN_OSPEED_VERYLOW(GPIOA_PIN1) | PIN_OSPEED_VERYLOW(GPIOA_PIN2) | PIN_OSPEED_VERYLOW(GPIOA_PIN3) | PIN_OSPEED_VERYLOW(GPIOA_PIN4) | PIN_OSPEED_VERYLOW(GPIOA_PIN5) | PIN_OSPEED_VERYLOW(GPIOA_PIN6) | PIN_OSPEED_VERYLOW(GPIOA_PIN7) | PIN_OSPEED_VERYLOW(GPIOA_PIN8) | PIN_OSPEED_VERYLOW(GPIOA_PIN9) | PIN_OSPEED_VERYLOW(GPIOA_PIN10) | PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | PIN_PUPDR_PULLUP(GPIOA_PIN1) | PIN_PUPDR_PULLUP(GPIOA_PIN2) | PIN_PUPDR_PULLUP(GPIOA_PIN3) | PIN_PUPDR_PULLUP(GPIOA_PIN4) | PIN_PUPDR_PULLUP(GPIOA_PIN5) | PIN_PUPDR_PULLUP(GPIOA_PIN6) | PIN_PUPDR_PULLUP(GPIOA_PIN7) | PIN_PUPDR_PULLUP(GPIOA_PIN8) | PIN_PUPDR_PULLUP(GPIOA_PIN9) | PIN_PUPDR_PULLUP(GPIOA_PIN10) | PIN_PUPDR_FLOATING(GPIOA_USB_DM) | PIN_PUPDR_FLOATING(GPIOA_USB_DP) | PIN_PUPDR_PULLUP(GPIOA_SWDIO) | PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | PIN_ODR_HIGH(GPIOA_PIN1) | PIN_ODR_HIGH(GPIOA_PIN2) | PIN_ODR_HIGH(GPIOA_PIN3) | PIN_ODR_HIGH(GPIOA_PIN4) | PIN_ODR_HIGH(GPIOA_PIN5) | PIN_ODR_HIGH(GPIOA_PIN6) | PIN_ODR_HIGH(GPIOA_PIN7) | PIN_ODR_HIGH(GPIOA_PIN8) | PIN_ODR_HIGH(GPIOA_PIN9) | PIN_ODR_HIGH(GPIOA_PIN10) | PIN_ODR_HIGH(GPIOA_USB_DM) | PIN_ODR_HIGH(GPIOA_USB_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | PIN_AFIO_AF(GPIOA_PIN1, 0U) | PIN_AFIO_AF(GPIOA_PIN2, 0U) | PIN_AFIO_AF(GPIOA_PIN3, 0U) | PIN_AFIO_AF(GPIOA_PIN4, 0U) | PIN_AFIO_AF(GPIOA_PIN5, 0U) | PIN_AFIO_AF(GPIOA_PIN6, 0U) | PIN_AFIO_AF(GPIOA_PIN7, 0U))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | PIN_AFIO_AF(GPIOA_PIN9, 0U) | PIN_AFIO_AF(GPIOA_PIN10, 0U) | PIN_AFIO_AF(GPIOA_USB_DM, 0U) | PIN_AFIO_AF(GPIOA_USB_DP, 0U) | PIN_AFIO_AF(GPIOA_SWDIO, 0U) | PIN_AFIO_AF(GPIOA_SWCLK, 0U) | PIN_AFIO_AF(GPIOA_PIN15, 0U))
-
-/*
- * GPIOB setup:
- *
- * PB0  - PIN0                      (input pullup).
- * PB1  - PIN1                      (input pullup).
- * PB2  - PIN2                      (input pullup).
- * PB3  - PIN3                      (input pullup).
- * PB4  - PIN4                      (input pullup).
- * PB5  - PIN5                      (input pullup).
- * PB6  - PIN6                      (input pullup).
- * PB7  - PIN7                      (input pullup).
- * PB8  - PIN8                      (input pullup).
- * PB9  - PIN9                      (input pullup).
- * PB10 - PIN10                     (input pullup).
- * PB11 - PIN11                     (input pullup).
- * PB12 - PIN12                     (input pullup).
- * PB13 - SPI2_SCK                  (alternate 0).
- * PB14 - SPI2_MISO                 (alternate 0).
- * PB15 - SPI2_MOSI                 (alternate 0).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_INPUT(GPIOB_PIN3) | PIN_MODE_INPUT(GPIOB_PIN4) | PIN_MODE_INPUT(GPIOB_PIN5) | PIN_MODE_INPUT(GPIOB_PIN6) | PIN_MODE_INPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_PIN8) | PIN_MODE_INPUT(GPIOB_PIN9) | PIN_MODE_INPUT(GPIOB_PIN10) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | PIN_OSPEED_VERYLOW(GPIOB_PIN1) | PIN_OSPEED_HIGH(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_PIN3) | PIN_OSPEED_HIGH(GPIOB_PIN4) | PIN_OSPEED_VERYLOW(GPIOB_PIN5) | PIN_OSPEED_VERYLOW(GPIOB_PIN6) | PIN_OSPEED_VERYLOW(GPIOB_PIN7) | PIN_OSPEED_VERYLOW(GPIOB_PIN8) | PIN_OSPEED_VERYLOW(GPIOB_PIN9) | PIN_OSPEED_VERYLOW(GPIOB_PIN10) | PIN_OSPEED_VERYLOW(GPIOB_PIN11) | PIN_OSPEED_VERYLOW(GPIOB_PIN12) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_PULLUP(GPIOB_PIN3) | PIN_PUPDR_PULLUP(GPIOB_PIN4) | PIN_PUPDR_PULLUP(GPIOB_PIN5) | PIN_PUPDR_PULLUP(GPIOB_PIN6) | PIN_PUPDR_PULLUP(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_PIN8) | PIN_PUPDR_PULLUP(GPIOB_PIN9) | PIN_PUPDR_PULLUP(GPIOB_PIN10) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_PIN3) | PIN_ODR_HIGH(GPIOB_PIN4) | PIN_ODR_HIGH(GPIOB_PIN5) | PIN_ODR_HIGH(GPIOB_PIN6) | PIN_ODR_HIGH(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_PIN8) | PIN_ODR_HIGH(GPIOB_PIN9) | PIN_ODR_HIGH(GPIOB_PIN10) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_SPI2_SCK) | PIN_ODR_HIGH(GPIOB_SPI2_MISO) | PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | PIN_AFIO_AF(GPIOB_PIN1, 0U) | PIN_AFIO_AF(GPIOB_PIN2, 0U) | PIN_AFIO_AF(GPIOB_PIN3, 0U) | PIN_AFIO_AF(GPIOB_PIN4, 0U) | PIN_AFIO_AF(GPIOB_PIN5, 0U) | PIN_AFIO_AF(GPIOB_PIN6, 0U) | PIN_AFIO_AF(GPIOB_PIN7, 0U))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | PIN_AFIO_AF(GPIOB_PIN9, 0U) | PIN_AFIO_AF(GPIOB_PIN10, 0U) | PIN_AFIO_AF(GPIOB_PIN11, 0U) | PIN_AFIO_AF(GPIOB_PIN12, 0U) | PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
-
-/*
- * GPIOC setup:
- *
- * PC0  - MEMS_CS                   (output pushpull maximum).
- * PC1  - PIN1                      (input pullup).
- * PC2  - PIN2                      (input pullup).
- * PC3  - PIN3                      (input pullup).
- * PC4  - PIN4                      (input pullup).
- * PC5  - PIN5                      (input pullup).
- * PC6  - LED_RED                   (output pushpull maximum).
- * PC7  - LED_BLUE                  (output pushpull maximum).
- * PC8  - LED_ORANGE                (output pushpull maximum).
- * PC9  - LED_GREEN                 (output pushpull maximum).
- * PC10 - PIN10                     (input pullup).
- * PC11 - PIN11                     (input pullup).
- * PC12 - PIN12                     (input pullup).
- * PC13 - PIN13                     (input pullup).
- * PC14 - OSC32_IN                  (input floating).
- * PC15 - OSC32_OUT                 (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | PIN_MODE_INPUT(GPIOC_PIN1) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_INPUT(GPIOC_PIN3) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_OUTPUT(GPIOC_LED_RED) | PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | PIN_MODE_INPUT(GPIOC_PIN10) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_INPUT(GPIOC_PIN12) | PIN_MODE_INPUT(GPIOC_PIN13) | PIN_MODE_INPUT(GPIOC_OSC32_IN) | PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | PIN_OSPEED_VERYLOW(GPIOC_PIN1) | PIN_OSPEED_VERYLOW(GPIOC_PIN2) | PIN_OSPEED_VERYLOW(GPIOC_PIN3) | PIN_OSPEED_VERYLOW(GPIOC_PIN4) | PIN_OSPEED_VERYLOW(GPIOC_PIN5) | PIN_OSPEED_HIGH(GPIOC_LED_RED) | PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | PIN_OSPEED_VERYLOW(GPIOC_PIN10) | PIN_OSPEED_VERYLOW(GPIOC_PIN11) | PIN_OSPEED_VERYLOW(GPIOC_PIN12) | PIN_OSPEED_VERYLOW(GPIOC_PIN13) | PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | PIN_PUPDR_PULLUP(GPIOC_PIN1) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_PULLUP(GPIOC_PIN3) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_FLOATING(GPIOC_LED_RED) | PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | PIN_PUPDR_PULLUP(GPIOC_PIN10) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_PIN12) | PIN_PUPDR_PULLUP(GPIOC_PIN13) | PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | PIN_ODR_HIGH(GPIOC_PIN1) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_PIN3) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_LOW(GPIOC_LED_RED) | PIN_ODR_LOW(GPIOC_LED_BLUE) | PIN_ODR_LOW(GPIOC_LED_ORANGE) | PIN_ODR_LOW(GPIOC_LED_GREEN) | PIN_ODR_HIGH(GPIOC_PIN10) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_PIN12) | PIN_ODR_HIGH(GPIOC_PIN13) | PIN_ODR_HIGH(GPIOC_OSC32_IN) | PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | PIN_AFIO_AF(GPIOC_PIN1, 0U) | PIN_AFIO_AF(GPIOC_PIN2, 0U) | PIN_AFIO_AF(GPIOC_PIN3, 0U) | PIN_AFIO_AF(GPIOC_PIN4, 0U) | PIN_AFIO_AF(GPIOC_PIN5, 0U) | PIN_AFIO_AF(GPIOC_LED_RED, 0U) | PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | PIN_AFIO_AF(GPIOC_PIN10, 0U) | PIN_AFIO_AF(GPIOC_PIN11, 0U) | PIN_AFIO_AF(GPIOC_PIN12, 0U) | PIN_AFIO_AF(GPIOC_PIN13, 0U) | PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
-
-/*
- * GPIOD setup:
- *
- * PD0  - PIN0                      (input pullup).
- * PD1  - PIN1                      (input pullup).
- * PD2  - PIN2                      (input pullup).
- * PD3  - PIN3                      (input pullup).
- * PD4  - PIN4                      (input pullup).
- * PD5  - PIN5                      (input pullup).
- * PD6  - PIN6                      (input pullup).
- * PD7  - PIN7                      (input pullup).
- * PD8  - PIN8                      (input pullup).
- * PD9  - PIN9                      (input pullup).
- * PD10 - PIN10                     (input pullup).
- * PD11 - PIN11                     (input pullup).
- * PD12 - PIN12                     (input pullup).
- * PD13 - PIN13                     (input pullup).
- * PD14 - PIN14                     (input pullup).
- * PD15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_INPUT(GPIOD_PIN4) | PIN_MODE_INPUT(GPIOD_PIN5) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_INPUT(GPIOD_PIN12) | PIN_MODE_INPUT(GPIOD_PIN13) | PIN_MODE_INPUT(GPIOD_PIN14) | PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | PIN_OSPEED_VERYLOW(GPIOD_PIN1) | PIN_OSPEED_VERYLOW(GPIOD_PIN2) | PIN_OSPEED_VERYLOW(GPIOD_PIN3) | PIN_OSPEED_VERYLOW(GPIOD_PIN4) | PIN_OSPEED_VERYLOW(GPIOD_PIN5) | PIN_OSPEED_VERYLOW(GPIOD_PIN6) | PIN_OSPEED_VERYLOW(GPIOD_PIN7) | PIN_OSPEED_VERYLOW(GPIOD_PIN8) | PIN_OSPEED_VERYLOW(GPIOD_PIN9) | PIN_OSPEED_VERYLOW(GPIOD_PIN10) | PIN_OSPEED_VERYLOW(GPIOD_PIN11) | PIN_OSPEED_VERYLOW(GPIOD_PIN12) | PIN_OSPEED_VERYLOW(GPIOD_PIN13) | PIN_OSPEED_VERYLOW(GPIOD_PIN14) | PIN_OSPEED_VERYLOW(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_PIN4) | PIN_PUPDR_PULLUP(GPIOD_PIN5) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_PULLUP(GPIOD_PIN12) | PIN_PUPDR_PULLUP(GPIOD_PIN13) | PIN_PUPDR_PULLUP(GPIOD_PIN14) | PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_PIN4) | PIN_ODR_HIGH(GPIOD_PIN5) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_HIGH(GPIOD_PIN12) | PIN_ODR_HIGH(GPIOD_PIN13) | PIN_ODR_HIGH(GPIOD_PIN14) | PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | PIN_AFIO_AF(GPIOD_PIN1, 0U) | PIN_AFIO_AF(GPIOD_PIN2, 0U) | PIN_AFIO_AF(GPIOD_PIN3, 0U) | PIN_AFIO_AF(GPIOD_PIN4, 0U) | PIN_AFIO_AF(GPIOD_PIN5, 0U) | PIN_AFIO_AF(GPIOD_PIN6, 0U) | PIN_AFIO_AF(GPIOD_PIN7, 0U))
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | PIN_AFIO_AF(GPIOD_PIN9, 0U) | PIN_AFIO_AF(GPIOD_PIN10, 0U) | PIN_AFIO_AF(GPIOD_PIN11, 0U) | PIN_AFIO_AF(GPIOD_PIN12, 0U) | PIN_AFIO_AF(GPIOD_PIN13, 0U) | PIN_AFIO_AF(GPIOD_PIN14, 0U) | PIN_AFIO_AF(GPIOD_PIN15, 0U))
-
-/*
- * GPIOE setup:
- *
- * PE0  - PIN0                      (input pullup).
- * PE1  - PIN1                      (input pullup).
- * PE2  - PIN2                      (input pullup).
- * PE3  - PIN3                      (input pullup).
- * PE4  - PIN4                      (input pullup).
- * PE5  - PIN5                      (input pullup).
- * PE6  - PIN6                      (input pullup).
- * PE7  - PIN7                      (input pullup).
- * PE8  - PIN8                      (input pullup).
- * PE9  - PIN9                      (input pullup).
- * PE10 - PIN10                     (input pullup).
- * PE11 - PIN11                     (input pullup).
- * PE12 - PIN12                     (input pullup).
- * PE13 - PIN13                     (input pullup).
- * PE14 - PIN14                     (input pullup).
- * PE15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | PIN_MODE_INPUT(GPIOE_PIN1) | PIN_MODE_INPUT(GPIOE_PIN2) | PIN_MODE_INPUT(GPIOE_PIN3) | PIN_MODE_INPUT(GPIOE_PIN4) | PIN_MODE_INPUT(GPIOE_PIN5) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_INPUT(GPIOE_PIN8) | PIN_MODE_INPUT(GPIOE_PIN9) | PIN_MODE_INPUT(GPIOE_PIN10) | PIN_MODE_INPUT(GPIOE_PIN11) | PIN_MODE_INPUT(GPIOE_PIN12) | PIN_MODE_INPUT(GPIOE_PIN13) | PIN_MODE_INPUT(GPIOE_PIN14) | PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | PIN_OSPEED_VERYLOW(GPIOE_PIN1) | PIN_OSPEED_VERYLOW(GPIOE_PIN2) | PIN_OSPEED_VERYLOW(GPIOE_PIN3) | PIN_OSPEED_VERYLOW(GPIOE_PIN4) | PIN_OSPEED_VERYLOW(GPIOE_PIN5) | PIN_OSPEED_VERYLOW(GPIOE_PIN6) | PIN_OSPEED_VERYLOW(GPIOE_PIN7) | PIN_OSPEED_VERYLOW(GPIOE_PIN8) | PIN_OSPEED_VERYLOW(GPIOE_PIN9) | PIN_OSPEED_VERYLOW(GPIOE_PIN10) | PIN_OSPEED_VERYLOW(GPIOE_PIN11) | PIN_OSPEED_VERYLOW(GPIOE_PIN12) | PIN_OSPEED_VERYLOW(GPIOE_PIN13) | PIN_OSPEED_VERYLOW(GPIOE_PIN14) | PIN_OSPEED_VERYLOW(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | PIN_PUPDR_PULLUP(GPIOE_PIN1) | PIN_PUPDR_PULLUP(GPIOE_PIN2) | PIN_PUPDR_PULLUP(GPIOE_PIN3) | PIN_PUPDR_PULLUP(GPIOE_PIN4) | PIN_PUPDR_PULLUP(GPIOE_PIN5) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_PULLUP(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_PULLUP(GPIOE_PIN13) | PIN_PUPDR_PULLUP(GPIOE_PIN14) | PIN_PUPDR_PULLUP(GPIOE_PIN15))
-#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | PIN_ODR_HIGH(GPIOE_PIN1) | PIN_ODR_HIGH(GPIOE_PIN2) | PIN_ODR_HIGH(GPIOE_PIN3) | PIN_ODR_HIGH(GPIOE_PIN4) | PIN_ODR_HIGH(GPIOE_PIN5) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_HIGH(GPIOE_PIN8) | PIN_ODR_HIGH(GPIOE_PIN9) | PIN_ODR_HIGH(GPIOE_PIN10) | PIN_ODR_HIGH(GPIOE_PIN11) | PIN_ODR_HIGH(GPIOE_PIN12) | PIN_ODR_HIGH(GPIOE_PIN13) | PIN_ODR_HIGH(GPIOE_PIN14) | PIN_ODR_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | PIN_AFIO_AF(GPIOE_PIN1, 0U) | PIN_AFIO_AF(GPIOE_PIN2, 0U) | PIN_AFIO_AF(GPIOE_PIN3, 0U) | PIN_AFIO_AF(GPIOE_PIN4, 0U) | PIN_AFIO_AF(GPIOE_PIN5, 0U) | PIN_AFIO_AF(GPIOE_PIN6, 0U) | PIN_AFIO_AF(GPIOE_PIN7, 0U))
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | PIN_AFIO_AF(GPIOE_PIN9, 0U) | PIN_AFIO_AF(GPIOE_PIN10, 0U) | PIN_AFIO_AF(GPIOE_PIN11, 0U) | PIN_AFIO_AF(GPIOE_PIN12, 0U) | PIN_AFIO_AF(GPIOE_PIN13, 0U) | PIN_AFIO_AF(GPIOE_PIN14, 0U) | PIN_AFIO_AF(GPIOE_PIN15, 0U))
-
-/*
- * GPIOF setup:
- *
- * PF0  - OSC_IN                    (input floating).
- * PF1  - OSC_OUT                   (input floating).
- * PF2  - PIN2                      (input pullup).
- * PF3  - PIN3                      (input pullup).
- * PF4  - PIN4                      (input pullup).
- * PF5  - PIN5                      (input pullup).
- * PF6  - PIN6                      (input pullup).
- * PF7  - PIN7                      (input pullup).
- * PF8  - PIN8                      (input pullup).
- * PF9  - PIN9                      (input pullup).
- * PF10 - PIN10                     (input pullup).
- * PF11 - PIN11                     (input pullup).
- * PF12 - PIN12                     (input pullup).
- * PF13 - PIN13                     (input pullup).
- * PF14 - PIN14                     (input pullup).
- * PF15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | PIN_MODE_INPUT(GPIOF_OSC_OUT) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | PIN_OSPEED_VERYLOW(GPIOF_PIN2) | PIN_OSPEED_VERYLOW(GPIOF_PIN3) | PIN_OSPEED_VERYLOW(GPIOF_PIN4) | PIN_OSPEED_VERYLOW(GPIOF_PIN5) | PIN_OSPEED_VERYLOW(GPIOF_PIN6) | PIN_OSPEED_VERYLOW(GPIOF_PIN7) | PIN_OSPEED_VERYLOW(GPIOF_PIN8) | PIN_OSPEED_VERYLOW(GPIOF_PIN9) | PIN_OSPEED_VERYLOW(GPIOF_PIN10) | PIN_OSPEED_VERYLOW(GPIOF_PIN11) | PIN_OSPEED_VERYLOW(GPIOF_PIN12) | PIN_OSPEED_VERYLOW(GPIOF_PIN13) | PIN_OSPEED_VERYLOW(GPIOF_PIN14) | PIN_OSPEED_VERYLOW(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | PIN_ODR_HIGH(GPIOF_OSC_OUT) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | PIN_AFIO_AF(GPIOF_PIN2, 0U) | PIN_AFIO_AF(GPIOF_PIN3, 0U) | PIN_AFIO_AF(GPIOF_PIN4, 0U) | PIN_AFIO_AF(GPIOF_PIN5, 0U) | PIN_AFIO_AF(GPIOF_PIN6, 0U) | PIN_AFIO_AF(GPIOF_PIN7, 0U))
-#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | PIN_AFIO_AF(GPIOF_PIN9, 0U) | PIN_AFIO_AF(GPIOF_PIN10, 0U) | PIN_AFIO_AF(GPIOF_PIN11, 0U) | PIN_AFIO_AF(GPIOF_PIN12, 0U) | PIN_AFIO_AF(GPIOF_PIN13, 0U) | PIN_AFIO_AF(GPIOF_PIN14, 0U) | PIN_AFIO_AF(GPIOF_PIN15, 0U))
-
-/*===========================================================================*/
-/* External declarations.                                                    */
-/*===========================================================================*/
-
-#if !defined(_FROM_ASM_)
-#    ifdef __cplusplus
-extern "C" {
-#    endif
-void boardInit(void);
-#    ifdef __cplusplus
-}
-#    endif
-#endif /* _FROM_ASM_ */
-
-#endif /* BOARD_H */
diff --git a/platforms/chibios/GENERIC_STM32_F072XB/board/board.mk b/platforms/chibios/GENERIC_STM32_F072XB/board/board.mk
index 842e335905..3f0e6c46e8 100644
--- a/platforms/chibios/GENERIC_STM32_F072XB/board/board.mk
+++ b/platforms/chibios/GENERIC_STM32_F072XB/board/board.mk
@@ -1,8 +1,8 @@
 # List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/board/board.c
+BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F072RB/board.c
 
 # Required include directories
-BOARDINC = $(BOARD_PATH)/board
+BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F072RB
 
 # Shared variables
 ALLCSRC += $(BOARDSRC)
diff --git a/platforms/chibios/GENERIC_STM32_F072XB/configs/board.h b/platforms/chibios/GENERIC_STM32_F072XB/configs/board.h
new file mode 100644
index 0000000000..30af6b0c86
--- /dev/null
+++ b/platforms/chibios/GENERIC_STM32_F072XB/configs/board.h
@@ -0,0 +1,20 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include_next "board.h"
+
+#undef STM32_HSE_BYPASS
diff --git a/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h
new file mode 100644
index 0000000000..688350e9ce
--- /dev/null
+++ b/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h
@@ -0,0 +1,177 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI_ENABLED TRUE
+#define STM32_HSI14_ENABLED TRUE
+#define STM32_HSI48_ENABLED FALSE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED FALSE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE 1
+#define STM32_PLLMUL_VALUE 12
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE STM32_PPRE_DIV1
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_USBSW STM32_USBSW_HSI48
+#define STM32_CECSW STM32_CECSW_HSI
+#define STM32_I2C1SW STM32_I2C1SW_HSI
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_1_IRQ_PRIORITY 3
+#define STM32_IRQ_EXTI2_3_IRQ_PRIORITY 3
+#define STM32_IRQ_EXTI4_15_IRQ_PRIORITY 3
+#define STM32_IRQ_EXTI16_IRQ_PRIORITY 3
+#define STM32_IRQ_EXTI17_20_IRQ_PRIORITY 3
+#define STM32_IRQ_EXTI21_22_IRQ_PRIORITY 3
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM14 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 2
+#define STM32_GPT_TIM2_IRQ_PRIORITY 2
+#define STM32_GPT_TIM3_IRQ_PRIORITY 2
+#define STM32_GPT_TIM14_IRQ_PRIORITY 2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 3
+#define STM32_I2C_I2C2_IRQ_PRIORITY 3
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 3
+#define STM32_ICU_TIM2_IRQ_PRIORITY 3
+#define STM32_ICU_TIM3_IRQ_PRIORITY 3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 3
+#define STM32_PWM_TIM2_IRQ_PRIORITY 3
+#define STM32_PWM_TIM3_IRQ_PRIORITY 3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 3
+#define STM32_SERIAL_USART2_PRIORITY 3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 2
+#define STM32_SPI_SPI2_IRQ_PRIORITY 2
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 2
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 3
+#define STM32_UART_USART2_IRQ_PRIORITY 3
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
+
+#endif /* _MCUCONF_H_ */