Fix the LUFA lib to use a submodule instead of just files (#6245)

* Remove LUFA files

* Update descriptions for newer version of LUFA

* Create PR6245.md

* Fix CDC(Serial) type errors

* Fix missed merge conflict for AUDIO_DTYPE_CSInterface

1 files changed, 0 insertions, 164 deletions

diff --git a/lib/lufa/Projects/AVRISP-MKII/AVRISP-MKII.c b/lib/lufa/Projects/AVRISP-MKII/AVRISP-MKII.c
deleted file mode 100644
index a734d960ba..0000000000
--- a/lib/lufa/Projects/AVRISP-MKII/AVRISP-MKII.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2017.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the AVRISP project. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "AVRISP-MKII.h"
-
-#if (BOARD != BOARD_NONE)
-  /* Some board hardware definitions (e.g. the Arduino Micro) have their LEDs defined on the same pins
-     as the ISP, PDI or TPI interfaces (see the accompanying project documentation). If a board other
-     than NONE is selected (to enable the LED driver with the programmer) you should double-check that
-     no conflicts will occur. If there is a conflict, turn off the LEDs (set BOARD to NONE in the makefile)
-     or define a custom board driver (see the LUFA manual) with alternative LED mappings.
-  */
-  #warning Board specific drivers have been selected; make sure the board LED driver does not conflict with the programmer ISP/PDI/TPI interfaces.
-#endif
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-	V2Protocol_Init();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		#if (BOARD == BOARD_USBTINYMKII)
-		/* On the USBTINY-MKII target, there is a secondary LED which indicates the current selected power
-		   mode - either VBUS, or sourced from the VTARGET pin of the programming connectors */
-		LEDs_ChangeLEDs(LEDMASK_VBUSPOWER, (PIND & (1 << 0)) ? 0 : LEDMASK_VBUSPOWER);
-		#endif
-
-		AVRISP_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	#if defined(RESET_TOGGLES_LIBUSB_COMPAT)
-	UpdateCurrentCompatibilityMode();
-	#endif
-
-	/* USB Stack Initialization */
-	USB_Init();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup AVRISP Data OUT endpoint */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1);
-
-	/* Setup AVRISP Data IN endpoint if it is using a physically different endpoint */
-	if ((AVRISP_DATA_IN_EPADDR & ENDPOINT_EPNUM_MASK) != (AVRISP_DATA_OUT_EPADDR & ENDPOINT_EPNUM_MASK))
-	  ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1);
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Processes incoming V2 Protocol commands from the host, returning a response when required. */
-void AVRISP_Task(void)
-{
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	V2Params_UpdateParamValues();
-
-	Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPADDR);
-
-	/* Check to see if a V2 Protocol command has been received */
-	if (Endpoint_IsOUTReceived())
-	{
-		LEDs_SetAllLEDs(LEDMASK_BUSY);
-
-		/* Pass off processing of the V2 Protocol command to the V2 Protocol handler */
-		V2Protocol_ProcessCommand();
-
-		LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	}
-}
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- *
- *  \param[in]  wValue                 Descriptor type and index to retrieve
- *  \param[in]  wIndex                 Sub-index to retrieve (such as a localized string language)
- *  \param[out] DescriptorAddress      Address of the retrieved descriptor
- *
- *  \return Length of the retrieved descriptor in bytes, or NO_DESCRIPTOR if the descriptor was not found
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint16_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress);
-}
-