Telophase cleanup (#13225)

7 files changed, 177 insertions, 310 deletions

diff --git a/keyboards/telophase/config.h b/keyboards/telophase/config.h
index c67dd939bf..51718da9d4 100644
--- a/keyboards/telophase/config.h
+++ b/keyboards/telophase/config.h
@@ -1,5 +1,5 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2021
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -15,32 +15,45 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    unknown
-#define PRODUCT         Telophase
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x6060
+#define DEVICE_VER   0x0001
+#define MANUFACTURER unknown
+#define PRODUCT      Telophase
 
 /* key matrix size */
 #define MATRIX_ROWS 4
 #define MATRIX_COLS 12
 
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-//#define BACKLIGHT_LEVELS 3
-
 #define ONESHOT_TIMEOUT 500
 
 /*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
@@ -55,10 +68,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
 
-//UART settings for communication with the RF microcontroller
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+// UART settings for communication with the RF microcontroller
 #define SERIAL_UART_BAUD 1000000
 #define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
 #define SERIAL_UART_INIT_CUSTOM       \
@@ -66,5 +81,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
     /* 8-bit data */                  \
     UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
-
-#endif
diff --git a/keyboards/telophase/keymaps/default/keymap.c b/keyboards/telophase/keymaps/default/keymap.c
index 9cc6c1bb00..163f754d43 100644
--- a/keyboards/telophase/keymaps/default/keymap.c
+++ b/keyboards/telophase/keymaps/default/keymap.c
@@ -1,99 +1,55 @@
-// this is the style you want to emulate.
-// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+/*
+Copyright 2021
 
-#include QMK_KEYBOARD_H
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
 
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-enum telophase_layers
-{
-	_QWERTY,
-	_LOWER,
-	_RAISE,
-	_ADJUST,
-};
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
 
-enum telophase_keycodes
-{
-  LOWER = SAFE_RANGE,
-  RAISE,
-  ADJUST
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST
 };
 
 #define LONGPRESS_DELAY 150
 #define LAYER_TOGGLE_DELAY 300
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_QWERTY] = { /*QWERTY*/
-	{KC_ESC,    KC_Q,      KC_W,    KC_E,    KC_R,    KC_T,      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
-	{KC_TAB,    KC_A,      KC_S,    KC_D,    KC_F,    KC_G,      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT },
-	{KC_LSFT,   KC_Z,      KC_X,    KC_C,    KC_V,    KC_B,      KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT  },
-	{KC_LCTL,   KC_LGUI,   KC_LALT, ADJUST,  LOWER,   KC_SPC,    KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT }
-},
-
-
-[_LOWER] = { /*Lower*/
-	{KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL    },
- 	{KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE   },
- 	{_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______ },
- 	{_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY   }
-},
-
-
-
-[_RAISE] = { /*Raise*/
-  	{KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL   },
-  	{KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS  },
-  	{_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______  },
-  	{_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  }
-
-},
-
-
-[_ADJUST] = { /*Adjust*/
-  	{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
-  	{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
-  	{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
-  	{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }
-
-},
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-      } else {
-        layer_off(_LOWER);
-      }
-      return false;
-      break;
-
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-      } else {
-        layer_off(_RAISE);
-      }
-      return false;
-      break;
-
-     case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
-
-  }
-  return true;
-}
-
-void matrix_scan_user(void) {
-		return;
+    [_QWERTY] = LAYOUT_ortho_4x12(
+        KC_ESC,  KC_Q,    KC_W,    KC_E,        KC_R,       KC_T,             KC_Y,    KC_U,       KC_I,    KC_O,    KC_P,    KC_BSPC,
+        KC_TAB,  KC_A,    KC_S,    KC_D,        KC_F,       KC_G,             KC_H,    KC_J,       KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,        KC_V,       KC_B,             KC_N,    KC_M,       KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+        KC_LCTL, KC_LGUI, KC_LALT, MO(_ADJUST), MO(_LOWER), KC_SPC,           KC_SPC,  MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT
+    ),
+    [_LOWER] = LAYOUT_ortho_4x12(
+        KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,          KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_DEL,
+        KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,            KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+        _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,           KC_F12,  S(KC_NUHS), S(KC_NUBS), _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+    ),
+    [_RAISE] = LAYOUT_ortho_4x12(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,             KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+        KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,            KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+        _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,           KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+    ),
+    [_ADJUST] = LAYOUT_ortho_4x12(
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______
+    )
 };
diff --git a/keyboards/telophase/matrix.c b/keyboards/telophase/matrix.c
index bc7a125e07..a153dd4bf1 100644
--- a/keyboards/telophase/matrix.c
+++ b/keyboards/telophase/matrix.c
@@ -15,86 +15,18 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#include <stdint.h>
-#include <stdbool.h>
-#if defined(__AVR__)
-#include <avr/io.h>
-#endif
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
+
+#include "quantum.h"
 #include "matrix.h"
-#include "timer.h"
 #include "protocol/serial.h"
 
-#if (MATRIX_COLS <= 8)
-#    define print_matrix_header()  print("\nr/c 01234567\n")
-#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop(matrix[i])
-#    define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
-#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop16(matrix[i])
-#    define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop32(matrix[i])
-#    define ROW_SHIFTER  ((uint32_t)1)
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-
-__attribute__ ((weak))
-void matrix_init_quantum(void) {
-    matrix_init_kb();
-}
-
-__attribute__ ((weak))
-void matrix_scan_quantum(void) {
-    matrix_scan_kb();
-}
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-    matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void) {
-    return MATRIX_COLS;
-}
-
-void matrix_init(void) {
-
-    matrix_init_quantum();
+void matrix_init_custom(void) {
     serial_init();
 }
 
-uint8_t matrix_scan(void)
-{
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
     uint32_t timeout = 0;
+    bool changed = false;
 
     //the s character requests the RF slave to send the matrix
     SERIAL_UART_DATA = 's';
@@ -107,9 +39,9 @@ uint8_t matrix_scan(void)
         //wait for the serial data, timeout if it's been too long
         //this only happened in testing with a loose wire, but does no
         //harm to leave it in here
-        while(!SERIAL_UART_RXD_PRESENT){
+        while (!SERIAL_UART_RXD_PRESENT) {
             timeout++;
-            if (timeout > 10000){
+            if (timeout > 10000) {
                 break;
             }
         }
@@ -118,47 +50,16 @@ uint8_t matrix_scan(void)
 
     //check for the end packet, the key state bytes use the LSBs, so 0xE0
     //will only show up here if the correct bytes were recieved
-    if (uart_data[11] == 0xE0)
-    {
+    if (uart_data[11] == 0xE0) {
         //shifting and transferring the keystates to the QMK matrix variable
         for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-            matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6;
+            matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 6;
+            if (current_matrix[i] != current_row) {
+                changed = true;
+            }
+            current_matrix[i] = current_row;
         }
     }
 
-
-    matrix_scan_quantum();
-    return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print_matrix_header();
-
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        print_hex8(row); print(": ");
-        print_matrix_row(row);
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += matrix_bitpop(i);
-    }
-    return count;
+    return changed;
 }
diff --git a/keyboards/telophase/readme.md b/keyboards/telophase/readme.md
index 97bce57bb8..26b623ca16 100644
--- a/keyboards/telophase/readme.md
+++ b/keyboards/telophase/readme.md
@@ -1,16 +1,13 @@
-Telophase
-=========
+# Telophase
 
 A wireless split compact keyboard.
 
-Hardware Supported: Telophase PCB
+This keyboard uses a completely different 'matrix scan' system to other keyboards, it relies on an external nRF51822 microcontroller maintaining a matrix of keystates received from the keyboard halves. The matrix.c file contains the code to poll the external microcontroller for the key matrix. As long as this file is not changed, all other QMK features are supported.
+
+* Hardware Supported: Telophase PCB
 
 Make example for this keyboard (after setting up your build environment):
 
     make telophase:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
-
-## Mitosis Notes
-
-These configuration files were based off the Atreus keyboard. It assumes a Pro Micro is being used, however retains the 'make upload' feature from the Atreus branch. This keyboard uses a completely different 'matrix scan' system to other keyboards, it relies on an external nRF51822 microcontroller maintaining a matrix of keystates received from the keyboard halves. The matrix.c file contains the code to poll the external microcontroller for the key matrix. As long as this file is not changed, all other QMK features are supported.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/telophase/rules.mk b/keyboards/telophase/rules.mk
index 614d909181..d475836b7b 100644
--- a/keyboards/telophase/rules.mk
+++ b/keyboards/telophase/rules.mk
@@ -2,34 +2,27 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
-#BOOTMAGIC_ENABLE = full	# Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes   # Commands for debug and configuration
-CUSTOM_MATRIX = yes    # Remote matrix from the wireless bridge
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		# USB Nkey Rollover - not yet supported in LUFA
-# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE = YES 		# MIDI controls
-UNICODE_ENABLE = YES 		# Unicode
-# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+CUSTOM_MATRIX = lite
 
-# # project specific files
-SRC = matrix.c serial_uart.c
+# project specific files
+SRC += matrix.c serial_uart.c
 
 # Disable unsupported hardware
 RGBLIGHT_SUPPORTED = no
diff --git a/keyboards/telophase/telophase.c b/keyboards/telophase/telophase.c
index 7484551c91..334cc7697b 100644
--- a/keyboards/telophase/telophase.c
+++ b/keyboards/telophase/telophase.c
@@ -1,26 +1,44 @@
+/*
+Copyright 2021
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #include "telophase.h"
 
 void led_init(void) {
-	DDRD  |= (1<<1);
-	PORTD |= (1<<1);
-	DDRF  |= (1<<4) | (1<<5);
-	PORTF |= (1<<4) | (1<<5);
+    setPinOutput(D1);
+    setPinOutput(F4);
+    setPinOutput(F5);
+    writePinHigh(D1);
+    writePinHigh(F4);
+    writePinHigh(F5);
 }
 
-
 void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init();
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+    matrix_init_user();
+    led_init();
 }
 
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
-{{12, 0}, {11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
-{{12, 1}, {11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
-{{12, 2}, {11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
-{{12, 3}, {11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}},
+    {{12, 0}, {11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
+    {{12, 1}, {11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
+    {{12, 2}, {11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
+    {{12, 3}, {11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}}
 };
 #endif
diff --git a/keyboards/telophase/telophase.h b/keyboards/telophase/telophase.h
index 458ea35da7..8ca6744176 100644
--- a/keyboards/telophase/telophase.h
+++ b/keyboards/telophase/telophase.h
@@ -1,14 +1,30 @@
-#ifndef TELOPHASE_H
-#define TELOPHASE_H
+/*
+Copyright 2021
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
 
 #include "quantum.h"
 
-#define red_led_off   PORTF |= (1<<5)
-#define red_led_on    PORTF &= ~(1<<5)
-#define blu_led_off   PORTF |= (1<<4)
-#define blu_led_on    PORTF &= ~(1<<4)
-#define grn_led_off   PORTD |= (1<<1)
-#define grn_led_on    PORTD &= ~(1<<1)
+#define red_led_off writePinHigh(F5)
+#define red_led_on  writePinLow(F5)
+#define blu_led_off writePinHigh(F4)
+#define blu_led_on  writePinLow(F4)
+#define grn_led_off writePinHigh(D1)
+#define grn_led_on  writePinLow(D1)
 
 #define set_led_off     red_led_off; grn_led_off; blu_led_off
 #define set_led_red     red_led_on;  grn_led_off; blu_led_off
@@ -19,46 +35,19 @@
 #define set_led_cyan    red_led_off; grn_led_on;  blu_led_on
 #define set_led_white   red_led_on;  grn_led_on;  blu_led_on
 
-/*
-#define LED_B 5
-#define LED_R 6
-#define LED_G 7
-
-#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
-
-#define red_led_on   PORTF |= (1<<LED_R)
-#define red_led_off  PORTF &= ~(1<<LED_R)
-#define grn_led_on   PORTF |= (1<<LED_G)
-#define grn_led_off  PORTF &= ~(1<<LED_G)
-#define blu_led_on   PORTF |= (1<<LED_B)
-#define blu_led_off  PORTF &= ~(1<<LED_B)
-
-#define set_led_off     PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
-#define set_led_red     PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
-#define set_led_blue    PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
-#define set_led_green   PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
-#define set_led_yellow  PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
-#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
-#define set_led_cyan    PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
-#define set_led_white   PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
-*/
-
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
 #define LAYOUT_ortho_4x12( \
-  k00, k01, k02, k03, k04, k05,      k06, k07, k08, k09, k10, k11, \
-  k12, k13, k14, k15, k16, k17,      k18, k19, k20, k21, k22, k23, \
-  k24, k25, k26, k27, k28, k29,      k30, k31, k32, k33, k34, k35, \
-  k36, k37, k38, k39, k40, k41,      k42, k43, k44, k45, k46, k47  \
-) \
-{ \
-	{ k00, k01, k02, k03, k04, k05,      k06, k07, k08, k09, k10, k11 }, \
-	{ k12, k13, k14, k15, k16, k17,      k18, k19, k20, k21, k22, k23 }, \
-	{ k24, k25, k26, k27, k28, k29,      k30, k31, k32, k33, k34, k35 }, \
-	{ k36, k37, k38, k39, k40, k41,      k42, k43, k44, k45, k46, k47 }, \
+    k00, k01, k02, k03, k04, k05,      k06, k07, k08, k09, k0A, k0B, \
+    k10, k11, k12, k13, k14, k15,      k16, k17, k18, k19, k1A, k1B, \
+    k20, k21, k22, k23, k24, k25,      k26, k27, k28, k29, k2A, k2B, \
+    k30, k31, k32, k33, k34, k35,      k36, k37, k38, k39, k3A, k3B \
+) { \
+    { k00, k01, k02, k03, k04, k05,      k06, k07, k08, k09, k0A, k0B }, \
+    { k10, k11, k12, k13, k14, k15,      k16, k17, k18, k19, k1A, k1B }, \
+    { k20, k21, k22, k23, k24, k25,      k26, k27, k28, k29, k2A, k2B }, \
+    { k30, k31, k32, k33, k34, k35,      k36, k37, k38, k39, k3A, k3B } \
 }
 
 #define LAYOUT LAYOUT_ortho_4x12
-
-#endif