Add support to XD60 Rev3 (#4938)

* Add preliminary support to XD60 Rev3 PCB (Supports the 12 underglow LEDs, but split spacebar still not wired/implemented).

* * xd60_rev3 folder removed
* xd60 rev2 and rev3 added
* ifndef replaced with pragma once at rev3 config.h

* Readme updated

* new updated statement at keyboards/xd60/readme.md

Co-Authored-By: rodrigofeijao <hello@rodrigofeijao.com>

* Update keyboards/xd60/readme.md

Co-Authored-By: rodrigofeijao <hello@rodrigofeijao.com>

* Update keyboards/xd60/readme.md

Co-Authored-By: rodrigofeijao <hello@rodrigofeijao.com>

* Update keyboards/xd60/readme.md

Co-Authored-By: rodrigofeijao <hello@rodrigofeijao.com>

* Update keyboards/xd60/readme.md

Co-Authored-By: rodrigofeijao <hello@rodrigofeijao.com>

* * XXXXX removed and replaced with 7X
* removed unecessary declarations

* Update keyboards/xd60/keymaps/styr/keymap.c

Co-Authored-By: rodrigofeijao <hello@rodrigofeijao.com>

* action_layer.h include removed

* * action_get_macro removed
* IS_COMMAND() removed
* BOOTLOADER defined

1 files changed, 71 insertions, 0 deletions

diff --git a/keyboards/xd60/rev3/config.h b/keyboards/xd60/rev3/config.h
new file mode 100644
index 0000000000..d88330cf7b
--- /dev/null
+++ b/keyboards/xd60/rev3/config.h
@@ -0,0 +1,71 @@
+/*
+Copyright 2019 Rodrigo Feijao <hello@rodrigofeijao.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6363
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    XIUDI
+#define PRODUCT         XD60rev3
+#define DESCRIPTION     XD60 rev3 Keyboard PCB by XIUDI
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* Backlight Setup */
+#define BACKLIGHT_PIN F5
+#define BACKLIGHT_LEVELS 6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* RGB Underglow
+ * F6 PIN for XD60v3 that has pre-soldered LEDs
+ */
+#define RGB_DI_PIN F6
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE