adding noah keyboard (#7432)

* adding noah keyboard

* Update keyboards/matrix/noah/config.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/matrix/noah/noah.c

Co-Authored-By: Drashna Jaelre <drashna@live.com>

1 files changed, 130 insertions, 0 deletions

diff --git a/keyboards/matrix/noah/eeprom_f4.h b/keyboards/matrix/noah/eeprom_f4.h
new file mode 100644
index 0000000000..bc4fa08cfc
--- /dev/null
+++ b/keyboards/matrix/noah/eeprom_f4.h
@@ -0,0 +1,130 @@
+/**
+  ******************************************************************************
+  * @file    EEPROM/EEPROM_Emulation/inc/eeprom.h
+  * @author  MCD Application Team
+  * @brief   This file contains all the functions prototypes for the EEPROM
+  *          emulation firmware library.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright � 2017 STMicroelectronics International N.V.
+  * All rights reserved.</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without
+  * modification, are permitted, provided that the following conditions are met:
+  *
+  * 1. Redistribution of source code must retain the above copyright notice,
+  *    this list of conditions and the following disclaimer.
+  * 2. Redistributions in binary form must reproduce the above copyright notice,
+  *    this list of conditions and the following disclaimer in the documentation
+  *    and/or other materials provided with the distribution.
+  * 3. Neither the name of STMicroelectronics nor the names of other
+  *    contributors to this software may be used to endorse or promote products
+  *    derived from this software without specific written permission.
+  * 4. This software, including modifications and/or derivative works of this
+  *    software, must execute solely and exclusively on microcontroller or
+  *    microprocessor devices manufactured by or for STMicroelectronics.
+  * 5. Redistribution and use of this software other than as permitted under
+  *    this license is void and will automatically terminate your rights under
+  *    this license.
+  *
+  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __EEPROM_H
+#define __EEPROM_H
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "hal.h"
+
+typedef enum
+{
+  HAL_OK       = 0x00U,
+  HAL_ERROR    = 0x01U,
+  HAL_BUSY     = 0x02U,
+  HAL_TIMEOUT  = 0x03U
+} HAL_StatusTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* EEPROM emulation firmware error codes */
+#define EE_OK      (uint32_t)HAL_OK
+#define EE_ERROR   (uint32_t)HAL_ERROR
+#define EE_BUSY    (uint32_t)HAL_BUSY
+#define EE_TIMEOUT (uint32_t)HAL_TIMEOUT
+
+/* Define the size of the sectors to be used */
+#define PAGE_SIZE               (uint32_t)0x4000  /* Page size = 16KByte */
+
+/* Device voltage range supposed to be [2.7V to 3.6V], the operation will
+   be done by word  */
+#define VOLTAGE_RANGE           (uint8_t)VOLTAGE_RANGE_3
+
+/* EEPROM start address in Flash */
+#define EEPROM_START_ADDRESS  ((uint32_t)0x08008000) /* EEPROM emulation start address:
+                                                  from sector2 : after 16KByte of used
+                                                  Flash memory */
+
+/* Pages 0 and 1 base and end addresses */
+#define PAGE0_BASE_ADDRESS    ((uint32_t)(EEPROM_START_ADDRESS + 0x0000))
+#define PAGE0_END_ADDRESS     ((uint32_t)(EEPROM_START_ADDRESS + (PAGE_SIZE - 1)))
+#define PAGE0_ID               2//FLASH_SECTOR_2
+
+#define PAGE1_BASE_ADDRESS    ((uint32_t)(EEPROM_START_ADDRESS + 0x4000))
+#define PAGE1_END_ADDRESS     ((uint32_t)(EEPROM_START_ADDRESS + (2 * PAGE_SIZE - 1)))
+#define PAGE1_ID               3//FLASH_SECTOR_3
+
+/* Used Flash pages for EEPROM emulation */
+#define PAGE0                 ((uint16_t)0x0000)
+#define PAGE1                 ((uint16_t)0x0001) /* Page nb between PAGE0_BASE_ADDRESS & PAGE1_BASE_ADDRESS*/
+
+/* No valid page define */
+#define NO_VALID_PAGE         ((uint16_t)0x00AB)
+
+/* Page status definitions */
+#define ERASED                ((uint16_t)0xFFFF)     /* Page is empty */
+#define RECEIVE_DATA          ((uint16_t)0xEEEE)     /* Page is marked to receive data */
+#define VALID_PAGE            ((uint16_t)0x0000)     /* Page containing valid data */
+
+/* Valid pages in read and write defines */
+#define READ_FROM_VALID_PAGE  ((uint8_t)0x00)
+#define WRITE_IN_VALID_PAGE   ((uint8_t)0x01)
+
+/* Page full define */
+#define PAGE_FULL             ((uint8_t)0x80)
+
+/* Variables' number */
+#define NB_OF_VAR             ((uint8_t)0x16)
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+HAL_StatusTypeDef FLASH_UnlockF4(void);
+HAL_StatusTypeDef FLASH_EraseSectorF4(uint32_t sector);
+HAL_StatusTypeDef FLASH_ProgramHalfWordF4(uint32_t address, uint16_t data);
+
+uint16_t EE_Init(void);
+uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data);
+uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data);
+
+#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= EEPROM_START_ADDRESS) && ((ADDRESS) < PAGE1_END_ADDRESS))
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) >= PAGE0_ID) && ((SECTOR) <= PAGE1_ID))
+
+#endif /* __EEPROM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/