move bm65hsrgb_iso and bm68hsrgb to rev1/ (#15132)

15 files changed, 1002 insertions, 0 deletions

diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/config.h b/keyboards/kprepublic/bm68hsrgb/rev1/config.h
new file mode 100644
index 0000000000..a779c97b7b
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/config.h
@@ -0,0 +1,174 @@
+/*
+Copyright 2021 peepeetee
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x4B50 //KP
+#define PRODUCT_ID   0xEF6F
+#define DEVICE_VER   0x0001
+#define MANUFACTURER KPRepublic
+#define PRODUCT      BM68HSRGB
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, \
+                          B1, \
+                          B2, \
+                          B3, \
+                          E6 }
+#define MATRIX_COL_PINS {     D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+// The pin connected to the data pin of the LEDs
+#define RGB_DI_PIN E2
+// The number of LEDs connected
+#define DRIVER_LED_TOTAL 74
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 74
+#    define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+#    define RGBLIGHT_LIMIT_VAL 180 // Limit to vendor-recommended value
+#endif
+#ifdef RGB_MATRIX_ENABLE
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value
+// RGB Matrix Animation modes. Explicitly enabled
+// For full list of effects, see:
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_BREATHING
+#    define ENABLE_RGB_MATRIX_BAND_SAT
+#    define ENABLE_RGB_MATRIX_BAND_VAL
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#    define ENABLE_RGB_MATRIX_CYCLE_ALL
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#    define ENABLE_RGB_MATRIX_DUAL_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#    define ENABLE_RGB_MATRIX_RAINDROPS
+#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#    define ENABLE_RGB_MATRIX_HUE_BREATHING
+#    define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#    define ENABLE_RGB_MATRIX_HUE_WAVE
+#    define ENABLE_RGB_MATRIX_PIXEL_RAIN
+#    define ENABLE_RGB_MATRIX_PIXEL_FLOW
+#    define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#    define ENABLE_RGB_MATRIX_SPLASH
+#    define ENABLE_RGB_MATRIX_MULTISPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/info.json b/keyboards/kprepublic/bm68hsrgb/rev1/info.json
new file mode 100644
index 0000000000..0a72da6e98
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/info.json
@@ -0,0 +1,79 @@
+{
+    "keyboard_name": "BM68HSRGB",
+    "url": "",
+    "maintainer": "peepeetee",
+    "layouts": {
+        "LAYOUT_65_ansi": {
+            "layout": [
+                {"label":"K00 (B0,D0)", "x":0, "y":0},
+                {"label":"K01 (B0,D1)", "x":1, "y":0},
+                {"label":"K02 (B0,D2)", "x":2, "y":0},
+                {"label":"K03 (B0,D3)", "x":3, "y":0},
+                {"label":"K04 (B0,D5)", "x":4, "y":0},
+                {"label":"K05 (B0,D4)", "x":5, "y":0},
+                {"label":"K06 (B0,D6)", "x":6, "y":0},
+                {"label":"K07 (B0,D7)", "x":7, "y":0},
+                {"label":"K08 (B0,B4)", "x":8, "y":0},
+                {"label":"K09 (B0,B5)", "x":9, "y":0},
+                {"label":"K0A (B0,B6)", "x":10, "y":0},
+                {"label":"K0B (B0,C6)", "x":11, "y":0},
+                {"label":"K0C (B0,C7)", "x":12, "y":0},
+                {"label":"K0D (B0,F7)", "x":13, "y":0, "w":2},
+                {"label":"K0E (B0,F6)", "x":15, "y":0},
+                {"label":"K10 (B1,D0)", "x":0, "y":1, "w":1.5},
+                {"label":"K11 (B1,D1)", "x":1.5, "y":1},
+                {"label":"K12 (B1,D2)", "x":2.5, "y":1},
+                {"label":"K13 (B1,D3)", "x":3.5, "y":1},
+                {"label":"K14 (B1,D5)", "x":4.5, "y":1},
+                {"label":"K15 (B1,D4)", "x":5.5, "y":1},
+                {"label":"K16 (B1,D6)", "x":6.5, "y":1},
+                {"label":"K17 (B1,D7)", "x":7.5, "y":1},
+                {"label":"K18 (B1,B4)", "x":8.5, "y":1},
+                {"label":"K19 (B1,B5)", "x":9.5, "y":1},
+                {"label":"K1A (B1,B6)", "x":10.5, "y":1},
+                {"label":"K1B (B1,C6)", "x":11.5, "y":1},
+                {"label":"K1C (B1,C7)", "x":12.5, "y":1},
+                {"label":"K1D (B1,F7)", "x":13.5, "y":1, "w":1.5},
+                {"label":"K1E (B1,F6)", "x":15, "y":1},
+                {"label":"K20 (B2,D0)", "x":0, "y":2, "w":1.75},
+                {"label":"K22 (B2,D2)", "x":1.75, "y":2},
+                {"label":"K23 (B2,D3)", "x":2.75, "y":2},
+                {"label":"K24 (B2,D5)", "x":3.75, "y":2},
+                {"label":"K25 (B2,D4)", "x":4.75, "y":2},
+                {"label":"K26 (B2,D6)", "x":5.75, "y":2},
+                {"label":"K27 (B2,D7)", "x":6.75, "y":2},
+                {"label":"K28 (B2,B4)", "x":7.75, "y":2},
+                {"label":"K29 (B2,B5)", "x":8.75, "y":2},
+                {"label":"K2A (B2,B6)", "x":9.75, "y":2},
+                {"label":"K2B (B2,C6)", "x":10.75, "y":2},
+                {"label":"K2C (B2,C7)", "x":11.75, "y":2},
+                {"label":"K2D (B2,F7)", "x":12.75, "y":2, "w":2.25},
+                {"label":"K2E (B2,F6)", "x":15, "y":2},
+                {"label":"K31 (B3,D1)", "x":0, "y":3, "w":2.25},
+                {"label":"K32 (B3,D2)", "x":2.25, "y":3},
+                {"label":"K33 (B3,D3)", "x":3.25, "y":3},
+                {"label":"K34 (B3,D5)", "x":4.25, "y":3},
+                {"label":"K35 (B3,D4)", "x":5.25, "y":3},
+                {"label":"K36 (B3,D6)", "x":6.25, "y":3},
+                {"label":"K37 (B3,D7)", "x":7.25, "y":3},
+                {"label":"K38 (B3,B4)", "x":8.25, "y":3},
+                {"label":"K39 (B3,B5)", "x":9.25, "y":3},
+                {"label":"K3A (B3,B6)", "x":10.25, "y":3},
+                {"label":"K3B (B3,C6)", "x":11.25, "y":3},
+                {"label":"K3C (B3,C7)", "x":12.25, "y":3, "w":1.75},
+                {"label":"K3D (B3,F7)", "x":14, "y":3},
+                {"label":"K3E (B3,F6)", "x":15, "y":3},
+                {"label":"K40 (E6,D0)", "x":0, "y":4, "w":1.25},
+                {"label":"K41 (E6,D1)", "x":1.25, "y":4, "w":1.25},
+                {"label":"K42 (E6,D2)", "x":2.5, "y":4, "w":1.25},
+                {"label":"K46 (E6,D6)", "x":3.75, "y":4, "w":6.25},
+                {"label":"K49 (E6,B5)", "x":10, "y":4},
+                {"label":"K4A (E6,B6)", "x":11, "y":4},
+                {"label":"K4B (E6,C6)", "x":12, "y":4},
+                {"label":"K4C (E6,C7)", "x":13, "y":4},
+                {"label":"K4D (E6,F7)", "x":14, "y":4},
+                {"label":"K4E (E6,F6)", "x":15, "y":4}
+            ]
+        }
+    }
+}
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/keymap.c b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/keymap.c
new file mode 100644
index 0000000000..b4bc5cb59d
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/keymap.c
@@ -0,0 +1,52 @@
+/* Copyright 2021 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// // Defines names for use in layer keycodes and the keymap
+// enum layer_names {
+//     _BASE,
+//     _FN
+// };
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_65_ansi(
+         KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL,  KC_BSPC,   KC_DEL,
+         KC_TAB,    KC_Q,     KC_W,     KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC, KC_RBRC,  KC_BSLS, KC_HOME,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,        KC_ENT,    KC_PGUP,
+        KC_LSFT,         KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,     KC_RSFT,     KC_UP,  KC_PGDN,
+        KC_LCTL,   KC_LGUI,   KC_LALT,                     KC_SPC,                         KC_RALT,   MO(1),KC_RCTRL, KC_LEFT, KC_DOWN,  KC_RGHT
+    ),
+    [1] = LAYOUT_65_ansi(
+        KC_GRAVE,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,  _______,   _______,
+        _______,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______,  _______, _______,
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,       _______,    _______,
+        _______,      _______, _______, _______, _______,   RESET, _______, _______, _______, _______, _______,     _______,   _______,  _______,
+        _______,   _______,   _______,                    _______,                         _______, _______, _______, _______, _______,  _______
+    ),
+
+};
+
+/*
+Template
+    [ ] = LAYOUT_65_ansi(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,   _______,
+        _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,       _______,    _______,
+        _______,      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______,   _______,  _______,
+        _______,   _______,   _______,                    _______,                         _______, _______, _______, _______, _______,  _______
+    ),
+*/
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/readme.md b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/readme.md
new file mode 100644
index 0000000000..0408ee9e98
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for bm68rgb
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/config.h b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/config.h
new file mode 100644
index 0000000000..0748f83cdc
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/config.h
@@ -0,0 +1,132 @@
+/* Copyright 2021 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+
+// #define MODS_SHIFT  (get_mods() & MOD_MASK_SHIFT)
+// #define MODS_CTRL   (get_mods() & MOD_MASK_CTRL)
+// #define MODS_ALT    (get_mods() & MOD_MASK_ALT)
+
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)      // Key combination that allows the use of magic commands (useful for debugging)
+
+// #define NO_DEBUG                    // Disable debugging
+// #define NO_PRINT                    // Disable printing/debugging using hid_listen
+// #define NO_ACTION_LAYER             // Disable layers
+// #define NO_ACTION_TAPPING           // Disable tap dance and other tapping features
+// #define NO_ACTION_ONESHOT           // Disable one-shot modifiers
+// #define NO_ACTION_MACRO             // Disable old style macro handling: MACRO() & action_get_macro
+// #define TERMINAL_HELP
+// #define MOUSEKEY_INTERVAL 20
+// #define MOUSEKEY_DELAY 0
+// #define MOUSEKEY_TIME_TO_MAX 60
+// #define MOUSEKEY_MAX_SPEED 10
+// #define MOUSEKEY_WHEEL_DELAY 0
+#define FORCE_NKRO                  // NKRO by default requires to be turned on, this forces it on during keyboard startup regardless of EEPROM setting. NKRO can still be turned off but will be turned on again if the keyboard reboots.
+// #define QMK_KEYS_PER_SCAN 4         // Allows sending more than one key per scan. By default, only one key event gets sent via process_record() per scan. This has little impact on most typing, but if you're doing a lot of chords, or your scan rate is slow to begin with, you can have some delay in processing key events. Each press and release is a separate event. For a keyboard with 1ms or so scan times, even a very fast typist isn't going to produce the 500 keystrokes a second needed to actually get more than a few ms of delay from this. But if you're doing chording on something with 3-4ms scan times? You probably want this.
+// #define STRICT_LAYER_RELEASE        // Force a key release to be evaluated using the current layer stack instead of remembering which layer it came from (used for advanced cases)
+// #define LOCKING_SUPPORT_ENABLE      // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
+// #define LOCKING_RESYNC_ENABLE       // Tries to keep switch state consistent with keyboard LED state
+ #define TAPPING_TERM 200            // How long before a tap becomes a hold, if set above 500, a key tapped during the tapping term will turn it into a hold too
+// #define TAPPING_TERM_PER_KEY        // Enables handling for per key TAPPING_TERM settings
+// #define RETRO_TAPPING               // Tap anyway, even after TAPPING_TERM, if there was no other key interruption between press and release
+// #define TAPPING_TOGGLE 2            // How many taps before triggering the toggle
+// #define PERMISSIVE_HOLD             // Makes tap and hold keys trigger the hold if another key is pressed before releasing, even if it hasn't hit the TAPPING_TERM. See Permissive Hold for details
+// #define IGNORE_MOD_TAP_INTERRUPT    // Makes it possible to do rolling combos (zx) with keys that convert to other keys on hold, by enforcing the TAPPING_TERM for both keys. See Mod tap interrupt for details
+// #define TAPPING_FORCE_HOLD          // Makes it possible to use a dual role key as modifier shortly after having been tapped. See Hold after tap. Breaks any Tap Toggle functionality (TT or the One Shot Tap Toggle)
+// #define LEADER_TIMEOUT 300          // How long before the leader key times out. If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the LEADER_PER_KEY_TIMING option, which resets the timeout after each key is tapped.
+// #define LEADER_PER_KEY_TIMING       // Sets the timer for leader key chords to run on each key press rather than overall
+// #define LEADER_KEY_STRICT_KEY_PROCESSING    // Disables keycode filtering for Mod-Tap and Layer-Tap keycodes. Eg, if you enable this, you would need to specify MT(MOD_CTL, KC_A) if you want to use KC_A.
+// #define ONESHOT_TIMEOUT 300         // How long before oneshot times out
+// #define ONESHOT_TAP_TOGGLE 2        // How many taps before oneshot toggle is triggered
+// #define COMBO_COUNT 2               // Set this to the number of combos that you're using in the Combo feature.
+// #define COMBO_TERM 200              // How long for the Combo keys to be detected. Defaults to TAPPING_TERM if not defined.
+// #define TAP_CODE_DELAY 100          // Sets the delay between register_code and unregister_code, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds.
+// #define TAP_HOLD_CAPS_DELAY 80      // Sets the delay for Tap Hold keys (LT, MT) when using KC_CAPSLOCK keycode, as this has some special handling on MacOS.  The value is in milliseconds, and defaults to 80 ms if not defined. For macOS, you may want to set this to 200 or higher.
+
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_KEYPRESSES         // reacts to keypresses
+// #define RGB_MATRIX_KEYRELEASES        // reacts to keyreleases (instead of keypresses)
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_ALPHAS_MODS // Sets the default mode, if none has been set
+// #define RGBLIGHT_HUE_STEP 12        // Units to step when in/decreasing hue
+// #define RGBLIGHT_SAT_STEP 25        // Units to step when in/decreasing saturation
+// #define RGBLIGHT_VAL_STEP 12        // Units to step when in/decreasing value (brightness)
+// #define RGB_DISABLE_AFTER_TIMEOUT 0   // number of ticks to wait until disabling effects
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
+// #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+// #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+// #define RGBLIGHT_ANIMATIONS             // Run RGB animations
+// #define RGBLIGHT_ANIMATIONS             // Enable all additional animation modes.
+// #define RGBLIGHT_EFFECT_ALTERNATING     // Enable alternating animation mode.
+// #define RGBLIGHT_EFFECT_BREATHING       // Enable breathing animation mode.
+// #define RGBLIGHT_EFFECT_CHRISTMAS       // Enable christmas animation mode.
+// #define RGBLIGHT_EFFECT_KNIGHT          // Enable knight animation mode.
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD    // Enable rainbow mood animation mode.
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL   // Enable rainbow swirl animation mode.
+// #define RGBLIGHT_EFFECT_RGB_TEST        // Enable RGB test animation mode.
+// #define RGBLIGHT_EFFECT_SNAKE           // Enable snake animation mode.
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT // Enable static gradient mode.
+
+// #define RGBLIGHT_EFFECT_BREATHE_CENTER              // If defined, used to calculate the curve for the breathing animation. Valid values are 1.0 to 2.7
+// #define RGBLIGHT_EFFECT_BREATHE_MAX 255             // The maximum brightness for the breathing mode. Valid values are 1 to 255
+// #define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 1000     // How long to wait between light changes for the "Christmas" animation, in milliseconds
+// #define RGBLIGHT_EFFECT_CHRISTMAS_STEP 2            // The number of LEDs to group the red/green colors by for the "Christmas" animation
+// #define RGBLIGHT_EFFECT_KNIGHT_LED_NUM RGBLED_NUM   // The number of LEDs to have the "Knight" animation travel
+// #define RGBLIGHT_EFFECT_KNIGHT_LENGTH 3             // The number of LEDs to light up for the "Knight" animation
+// #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 0             // The number of LEDs to start the "Knight" animation from the start of the strip by
+// #define RGBLIGHT_RAINBOW_SWIRL_RANGE 255            // Range adjustment for the rainbow swirl effect to get different swirls
+// #define RGBLIGHT_EFFECT_SNAKE_LENGTH 4              // The number of LEDs to light up for the "Snake" animation
+
+// This list in in the correct mode order. Next mode is the following line, previous mode is previous line. Loops around.
+// #undef ENABLE_RGB_MATRIX_SOLID_COLOR                   // Static single hue, no speed support
+// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS                   // Static dual hue, speed is hue for secondary hue
+#undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN     // Static gradient top to bottom, speed controls how much gradient changes
+#undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT  // Static gradient top to bottom, speed controls how much gradient changes
+#undef ENABLE_RGB_MATRIX_BREATHING            // Single hue brightness cycling animation
+#undef ENABLE_RGB_MATRIX_BAND_SAT             // Single hue band fading saturation scrolling left to right
+#undef ENABLE_RGB_MATRIX_BAND_VAL             // Single hue band fading brightness scrolling left to right
+#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT    // Single hue 3 blade spinning pinwheel fades saturation
+#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL    // Single hue 3 blade spinning pinwheel fades brightness
+#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT      // Single hue spinning spiral fades saturation
+#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL      // Single hue spinning spiral fades brightness
+#undef ENABLE_RGB_MATRIX_CYCLE_ALL            // Full keyboard solid hue cycling through full gradient
+//#undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT              // Full gradient scrolling left to right
+#undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN           // Full gradient scrolling top to bottom
+#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON  // Full gradent Chevron shapped scrolling left to right
+#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN            // Full gradient scrolling out to in
+#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL       // Full dual gradients scrolling out to in
+#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL          // Full gradient spinning pinwheel around center of keyboard
+#undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL            // Full gradient spinning spiral around center of keyboard
+#undef ENABLE_RGB_MATRIX_DUAL_BEACON             // Full gradient spinning around center of keyboard
+#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON          // Full tighter gradient spinning around center of keyboard
+#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS       // Full dual gradients spinning two halfs of keyboard
+#undef ENABLE_RGB_MATRIX_RAINDROPS               // Randomly changes a single key's hue
+#undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS     // Randomly changes a single key's hue and saturation
+// =================================================== Requires RGB_MATRIX_FRAMEBUFFER_EFFECTS =============================================================
+// #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP                // How hot is your WPM!
+#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN               // That famous computer simulation
+                                                    // =================================================== RGB_MATRIX_KEYPRESSES OR RGB_MATRIX_KEYRELEASES =====================================================
+#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE      // Pulses keys hit to hue & value then fades value out
+#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE             // Static single hue, pulses keys hit to shifted hue then fades to current hue
+#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE        // Hue & value pulse near a single key hit then fades value out
+#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE   // Hue & value pulse near multiple key hits then fades value out
+#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS       // Hue & value pulse the same column and row of a single key hit then fades value out
+#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS  // Hue & value pulse the same column and row of multiple key hits then fades value out
+#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS       // Hue & value pulse away on the same column and row of a single key hit then fades value out
+#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS  // Hue & value pulse away on the same column and row of multiple key hits then fades value out
+#undef ENABLE_RGB_MATRIX_SPLASH                     // Full gradient & value pulse away from a single key hit then fades value out
+#undef ENABLE_RGB_MATRIX_MULTISPLASH                // Full gradient & value pulse away from multiple key hits then fades value out
+#undef ENABLE_RGB_MATRIX_SOLID_SPLASH               // Hue & value pulse away from a single key hit then fades value out
+#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH          // Hue & value pulse away from multiple key hits then fades value out
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.c b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.c
new file mode 100644
index 0000000000..934463b11f
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.c
@@ -0,0 +1,303 @@
+/* Copyright 2019 ash0x0 2021 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "keymap.h"
+// // Defines names for use in layer keycodes and the keymap
+// enum layer_names {
+//     _BASE,
+//     _FN
+// };
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_65_ansi(
+         KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL,  KC_BSPC,   KC_HOME,
+         KC_TAB,    KC_Q,     KC_W,     KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC, KC_RBRC,  KC_BSLS, KC_PGUP,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,        KC_ENT,    KC_PGDOWN,
+        KC_LSFT,         KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,     KC_RSFT,     KC_UP,  KC_END,
+        KC_LCTL,   KC_LGUI,LT(1, KC_LALT),                     KC_SPC,                         KC_RALT,   MO(1),KC_RCTRL, KC_LEFT, KC_DOWN,  KC_RGHT
+    ),
+    [1] = LAYOUT_65_ansi(
+        KC_GRAVE,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,  _______,   KC_DELETE,
+        RGB_MOD,   RGB_HUI, RGB_VAI, RGB_SAI, RGB_SPI, _______, KC_KP_7, KC_KP_8, KC_KP_9, _______, _______, _______, _______,  _______, KC_PGUP,
+        RGB_TOG,    RGB_HUD, RGB_VAD, RGB_SAD, RGB_SPD, _______, KC_KP_4, KC_KP_5, KC_KP_6, _______, _______, _______,       _______,    KC_PGDOWN,
+        BL_TOGG,      _______, _______, _______, _______,   RESET, KC_KP_1, KC_KP_2, KC_KP_3, _______, _______,     _______,   KC_AUDIO_VOL_UP,  KC_END,
+        _______,   _______,   _______,                    _______,                         _______, _______, _______, KC_BRIGHTNESS_DOWN, KC_AUDIO_VOL_DOWN,  KC_BRIGHTNESS_UP
+    ),
+
+};
+
+/*
+Templete
+    [ ] = LAYOUT_65_ansi(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,   _______,
+        _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,       _______,    _______,
+        _______,      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______,   _______,  _______,
+        _______,   _______,   _______,                    _______,                         _______, _______, _______, _______, _______,  _______
+    ),
+*/
+
+#ifdef _______
+#undef _______
+#define _______ {0, 0, 0}
+
+const uint8_t PROGMEM ledmap[][DRIVER_LED_TOTAL][3] = {
+    [1] = {
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,   _______,
+        GREEN,   BLUE, {0, 0, 255}, PURPLE, AZURE, _______, {0, 0, 255}, {0, 0, 255}, {0, 0, 255}, _______, _______, _______, _______,  _______, _______,
+        RED,    BLUE, {0, 0, 1}, PURPLE, AZURE, _______, {0, 0, 255}, {0, 0, 255}, {0, 0, 255}, _______, _______, _______,       _______,    _______,
+        _______,      _______, _______, _______, _______, RED, {0, 0, 255}, {0, 0, 255}, {0, 0, 255}, _______, _______,     _______,   _______,  _______,
+        _______,   _______,   _______,                    _______,                         _______, _______, _______, _______, _______,  _______
+    }
+
+};
+
+#undef _______
+#define _______ KC_TRNS
+#endif
+
+
+
+void keyboard_post_init_user(void) {
+  // Call the post init code.
+    dfa_state = 0; // ENGLISH
+}
+
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case KC_DELETE:
+      if (record->event.pressed) {
+                dfa_state = 0;
+    } else {
+        // Do something else when release
+      }
+      return false; // Skip all further processing of this key
+    case KC_SPC:
+      if (record->event.pressed) {
+          if ((get_mods() & MOD_BIT(KC_LGUI)) == MOD_BIT(KC_LGUI)){
+              if(dfa_state == 3){
+                  dfa_state = 0;
+              } else {
+                  dfa_state = dfa_state + 1;
+              }
+          }
+    } else {
+        // Do something else when release
+      }
+      return true; // Continue execution
+
+
+    case KC_HOME:
+      if (record->event.pressed) {
+          switch(dfa_state){
+            case 0 :{
+                return false;
+            }
+            case 1 :{
+                tap_code16(G(KC_SPC));
+                wait_ms(100);
+                tap_code16(G(KC_SPC));
+                wait_ms(100);
+                tap_code16(G(KC_SPC));
+                dfa_state = 0;
+                return false;
+            }
+            case 2 :{
+                tap_code16(G(KC_SPC));
+                wait_ms(100);
+                tap_code16(G(KC_SPC));
+                dfa_state = 0;
+                return false;
+            }
+            case 3 :{
+                tap_code16(G(KC_SPC));
+                dfa_state = 0;
+                return false;
+            }
+          }
+
+        // Do something when pressed
+      } else {
+        // Do something else when release
+      }
+      return false; // Skip all further processing of this key
+    // case KC_PGUP:
+    //   if (record->event.pressed) {
+    //       switch(dfa_state){
+    //         case 0 :{
+    //             tap_code16(G(KC_SPC));
+    //             dfa_state = 1;
+    //             return false;
+    //         }
+    //         case 1 :{
+    //             return false;
+    //         }
+    //         case 2 :{
+    //             tap_code16(G(KC_SPC));
+    //             wait_ms(100);
+    //             tap_code16(G(KC_SPC));
+    //             wait_ms(100);
+    //             tap_code16(G(KC_SPC));
+    //             dfa_state = 1;
+    //             return false;
+    //         }
+    //         case 3 :{
+    //             tap_code16(G(KC_SPC));
+    //             wait_ms(100);
+    //             tap_code16(G(KC_SPC));
+    //             dfa_state = 1;
+    //             return false;
+    //         }
+    //       }
+    //     // Do something when pressed
+    //   } else {
+    //     // Do something else when release
+    //   }
+    //   return false; // Skip all further processing of this key
+    // case KC_PGDOWN:
+    //   if (record->event.pressed) {
+    //       switch(dfa_state){
+    //         case 0 :{
+    //             tap_code16(G(KC_SPC));
+    //             wait_ms(100);
+    //             tap_code16(G(KC_SPC));
+    //             dfa_state = 2;
+    //             return false;
+    //         }
+    //         case 1 :{
+    //             tap_code16(G(KC_SPC));
+    //             dfa_state = 2;
+    //             return false;
+    //         }
+    //         case 2 :{
+    //             return false;
+    //         }
+    //         case 3 :{
+    //             tap_code16(G(KC_SPC));
+    //             wait_ms(100);
+    //             tap_code16(G(KC_SPC));
+    //             wait_ms(100);
+    //             tap_code16(G(KC_SPC));
+    //             dfa_state = 2;
+    //             return false;
+    //         }
+    //       }
+    //     // Do something when pressed
+    //   } else {
+    //     // Do something else when release
+    //   }
+    //   return false; // Skip all further processing of this key
+    // case KC_END:
+    //   if (record->event.pressed) {
+    //       switch(dfa_state){
+    //         case 0 :{
+    //             tap_code16(G(KC_SPC));
+    //             wait_ms(100);
+    //             tap_code16(G(KC_SPC));
+    //             wait_ms(100);
+    //             tap_code16(G(KC_SPC));
+    //             dfa_state = 3;
+    //             return false;
+    //         }
+    //         case 1 :{
+    //             tap_code16(G(KC_SPC));
+    //             wait_ms(100);
+    //             tap_code16(G(KC_SPC));
+    //             dfa_state = 3;
+    //             return false;
+    //         }
+    //         case 2 :{
+    //             tap_code16(G(KC_SPC));
+    //             dfa_state = 3;
+    //             return false;
+    //         }
+    //         case 3 :{
+    //             return false;
+    //         }
+    //       }
+    //     // Do something when pressed
+    //   } else {
+    //     // Do something else when release
+    //   }
+    //   return false; // Skip all further processing of this key
+            case RGB_TOG:
+            if (record->event.pressed) {
+              switch (rgb_matrix_get_flags()) {
+                case LED_FLAG_ALL: {
+                    rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER | LED_FLAG_INDICATOR);
+                    rgb_matrix_set_color_all(0, 0, 0);
+                  }
+                  break;
+                case (LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER | LED_FLAG_INDICATOR): {
+                    rgb_matrix_set_flags(LED_FLAG_UNDERGLOW);
+                    rgb_matrix_set_color_all(0, 0, 0);
+                  }
+                  break;
+                case LED_FLAG_UNDERGLOW: {
+                    rgb_matrix_set_flags(LED_FLAG_NONE);
+                    rgb_matrix_disable_noeeprom();
+                  }
+                  break;
+                default: {
+                    rgb_matrix_set_flags(LED_FLAG_ALL);
+                    rgb_matrix_enable_noeeprom();
+                  }
+                  break;
+              }
+            }
+            return false;
+    default:
+      return true; // Process all other keycodes normally
+  }
+}
+
+void set_layer_color(int layer) {
+    if (layer == 0) { return; }
+    for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        HSV hsv = {
+            .h = pgm_read_byte(&ledmap[layer][i][0]),
+            .s = pgm_read_byte(&ledmap[layer][i][1]),
+            .v = pgm_read_byte(&ledmap[layer][i][2]),
+        };
+        if (hsv.h || hsv.s || hsv.v) {
+            RGB rgb = hsv_to_rgb(hsv);
+            float f = (float)rgb_matrix_config.hsv.v / UINT8_MAX;
+            rgb_matrix_set_color(i, f * rgb.r, f * rgb.g, f * rgb.b);
+        } else if (layer != 1) {
+            // Only deactivate non-defined key LEDs at layers other than FN. Because at FN we have RGB adjustments and need to see them live.
+            // If the values are all false then it's a transparent key and deactivate LED at this layer
+            rgb_matrix_set_color(i, 0, 0, 0);
+        }
+    }
+}
+
+void rgb_matrix_indicators_user(void) {
+
+    led_t host_leds = host_keyboard_led_state();
+    if (host_leds.caps_lock) {
+        //rgb_matrix_set_color(30, 0xFF, 0xFF, 0xFF);
+        rgb_matrix_set_color(30, 0x0, 0x0, 0x0);
+
+    } else {
+        //rgb_matrix_set_color(30, 0x0, 0x0, 0x0);
+    }
+        set_layer_color(get_highest_layer(layer_state));
+
+}
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.h b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.h
new file mode 100644
index 0000000000..e8d0170d4d
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.h
@@ -0,0 +1,63 @@
+/* Copyright 2019 ash0x0 2021 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#include "print.h"
+#include <string.h>
+// HID has not yet been implemented for this keyboard
+// #include "raw_hid.h"
+
+#define MILLISECONDS_IN_SECOND 1000
+
+// These are just to make it neater to use builtin HSV values in the keymap
+#define RED {HSV_RED}
+#define CORAL {HSV_CORAL}
+#define ORANGE {HSV_ORANGE}
+#define GOLDEN {HSV_GOLDENROD}
+#define GOLD {HSV_GOLD}
+#define YELLOW {HSV_YELLOW}
+#define CHART {HSV_CHARTREUSE}
+#define GREEN {HSV_GREEN}
+#define SPRING {HSV_SPRINGGREEN}
+#define TURQ {HSV_TURQUOISE}
+#define TEAL {HSV_TEAL}
+#define CYAN {HSV_CYAN}
+#define AZURE {HSV_AZURE}
+#define BLUE {HSV_BLUE}
+#define PURPLE {HSV_PURPLE}
+#define MAGENT {HSV_MAGENTA}
+#define PINK {HSV_PINK}
+
+//========================================================== CONFIGURABLE DEFAULTS ==========================================================
+#define RGB_DEFAULT_TIME_OUT 30
+#define RGB_FAST_MODE_TIME_OUT 3
+#define RGB_TIME_OUT_MAX 600
+#define RGB_TIME_OUT_MIN 10
+#define RGB_TIME_OUT_STEP 10
+
+extern bool g_suspend_state;
+bool disable_layer_color;
+
+uint8_t dfa_state;  //state for my language switching DFA
+
+
+bool rgb_enabled_flag;                  // Current LED state flag. If false then LED is off.
+bool rgb_time_out_enable;               // Idle LED toggle enable. If false then LED will not turn off after idle timeout.
+bool rgb_time_out_fast_mode_enabled;    // Enable flag for RGB timeout fast mode
+bool rgb_time_out_user_value;           // This holds the toggle value set by user with ROUT_TG. It's necessary as RGB_TOG changes timeout enable.
+uint16_t rgb_time_out_seconds;          // Idle LED timeout value, in seconds not milliseconds
+uint16_t rgb_time_out_saved_seconds;    // The saved user config for RGB timeout period
+led_flags_t rgb_time_out_saved_flag;    // Store LED flag before timeout so it can be restored when LED is turned on again.
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/readme.md b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/readme.md
new file mode 100644
index 0000000000..47899c27e1
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/readme.md
@@ -0,0 +1 @@
+# peepeetee's keymap for the bm68rgb. Includes a DFA to set the windows system language back to English by pressing the top right button. Said DFA will only work with 4 languages(for now).
\ No newline at end of file
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/keymap.c b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/keymap.c
new file mode 100644
index 0000000000..46381c561c
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/keymap.c
@@ -0,0 +1,55 @@
+/* Copyright 2021 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+// enum layer_names {
+//     _BASE,
+//     _FN
+// };
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_65_ansi(
+         KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL,  KC_BSPC,   KC_DEL,
+         KC_TAB,    KC_Q,     KC_W,     KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC, KC_RBRC,  KC_BSLS, KC_HOME,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,        KC_ENT,    KC_PGUP,
+        KC_LSFT,         KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,     KC_LSFT,     KC_UP,  KC_PGDN,
+        KC_LCTL,   KC_LGUI,   KC_LALT,                     KC_SPC,                         KC_RALT,   MO(1),KC_RCTRL, KC_LEFT, KC_DOWN,  KC_RGHT
+    ),
+    [1] = LAYOUT_65_ansi(
+        KC_GRAVE,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,  _______,   _______,
+        _______,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______,  _______, _______,
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,       _______,    _______,
+        _______,      _______, _______, _______, _______,   RESET, _______, _______, _______, _______, _______,     _______,   _______,  _______,
+        _______,   _______,   _______,                    _______,                         _______, _______, _______, _______, _______,  _______
+    ),
+    [2] = LAYOUT_65_ansi(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,   _______,
+        _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,       _______,    _______,
+        _______,      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______,   _______,  _______,
+        _______,   _______,   _______,                    _______,                         _______, _______, _______, _______, _______,  _______
+    ),
+    [3] = LAYOUT_65_ansi(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,   _______,
+        _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,       _______,    _______,
+        _______,      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______,   _______,  _______,
+        _______,   _______,   _______,                    _______,                         _______, _______, _______, _______, _______,  _______
+    ),
+
+};
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/readme.md b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/readme.md
new file mode 100644
index 0000000000..c013ae25e2
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/readme.md
@@ -0,0 +1 @@
+# The default VIA keymap for bm68rgb
\ No newline at end of file
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/rules.mk b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/rules.mk
new file mode 100644
index 0000000000..1e5b99807c
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/readme.md b/keyboards/kprepublic/bm68hsrgb/rev1/readme.md
new file mode 100644
index 0000000000..54d71cab2c
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/readme.md
@@ -0,0 +1,24 @@
+# BM68HSRGB
+
+![BM68HSRGB](https://i.imgur.com/uuYP8OIl.jpeg)
+
+A 65% hotswap in switch RGB keyboard from KPRepublic.
+
+* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
+* Hardware Supported: BM68HSRGB
+* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm68rgb-bm68-rgb-65-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kprepublic/bm68hsrgb:default
+
+Flashing example for this keyboard:
+
+    make kprepublic/bm68hsrgb:default:flash
+
+To reset the board into bootloader mode, do one of the following:
+
+* Short the two-pad footprint to the left of the spacebar switch while the board is plugged in
+* Hold the Esc key while connecting the USB cable (also erases persistent settings)
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/rev1.c b/keyboards/kprepublic/bm68hsrgb/rev1/rev1.c
new file mode 100644
index 0000000000..4634a662b6
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/rev1.c
@@ -0,0 +1,52 @@
+/* Copyright 2021 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev1.h"
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+    // Key Matrix to LED Index
+    { 0,      1,      2,      3,      4,      5,      6,      7,      8,      9,      10,     11,     12,     13,     14 },
+    { 15,     16,     17,     18,     19,     20,     21,     22,     23,     24,     25,     26,     27,     28,     29 },
+    { 30,     NO_LED, 31,     32,     33,     34,     35,     36,     37,     38,     39,     40,     41,     42,     43 },
+    { NO_LED, 44,     45,     46,     47,     48,     49,     50,     51,     52,     53,     54,     55,     56,     57 },
+    { 58,     59,     60,     NO_LED, NO_LED, NO_LED, 61,     NO_LED, NO_LED, 62,     63,     64,     65,     66,     67 }
+}, {
+    // LED Index to Physical Position
+    {  0,  0}, { 15,  0}, { 30,  0}, { 45,  0}, { 60,  0}, { 75,  0}, { 90,  0}, {105,  0}, {120,  0}, {135,  0}, {150,  0}, {165,  0}, {180,  0}, {202,  0}, {225,  0}, // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace, Delete
+    {  4, 16}, { 22, 16}, { 37, 16}, { 52, 16}, { 67, 16}, { 82, 16}, { 97, 16}, {112, 16}, {127, 16}, {142, 16}, {157, 16}, {172, 16}, {187, 16}, {206, 16}, {225, 16}, // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ], backslash , Home
+    {  6, 32},            { 26, 32}, { 41, 32}, { 56, 32}, { 71, 32}, { 86, 32}, {101, 32}, {116, 32}, {131, 32}, {146, 32}, {161, 32}, {176, 32}, {201, 32}, {225, 32}, // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Page up
+               {  9, 48}, { 34, 48}, { 49, 48}, { 64, 48}, { 79, 48}, { 94, 48}, {109, 48}, {124, 48}, {139, 48}, {154, 48}, {169, 48}, {189, 48}, {208, 48}, {225, 48}, // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Page Down
+    {  2, 64}, { 21, 64}, { 39, 64},                                  { 94, 64},                       {148, 64}, {163, 64}, {178, 64}, {193, 64}, {208, 64}, {225, 64}, // Ctrl, GUI, Alt, Space, RAlt, FN, Ctrl, Left, Down, Right
+    {185, 45}, {160, 45}, {125, 45}, { 95, 45}, { 60, 45}, { 25, 45} // UNDERGLOW
+}, {
+    // LED Index to Flag
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,  // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace, Delete
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,  // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ], backslash , Home
+    1,    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,  // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Page up
+       1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1,  // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Page Down
+    1, 1, 1,          4,       1, 1, 1, 1, 1, 1,  // Ctrl, GUI, Alt, Space, RAlt, FN, Ctrl, Left, Down, Right
+    2, 2, 2, 2, 2, 2  // UNDERGLOW
+} };
+
+//CAPS backlight
+__attribute__ ((weak))
+void rgb_matrix_indicators_user(void) {
+    if (host_keyboard_led_state().caps_lock) {
+        rgb_matrix_set_color(30, 0xFF, 0xFF, 0xFF);
+    }
+}
+#endif
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/rev1.h b/keyboards/kprepublic/bm68hsrgb/rev1/rev1.h
new file mode 100644
index 0000000000..3e18b914cc
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/rev1.h
@@ -0,0 +1,41 @@
+/* Copyright 2021 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_65_ansi( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D,  k0E,\
+    k10,  k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E,\
+    k20,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C,   k2D,   k2E,\
+    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,    k3C, k3D, k3E,\
+    k40,  k41,  k42,             k46,             k49, k4A, k4B, k4C, k4D, k4E\
+) { \
+    { k00,   k01,   k02,   k03,   k04,   k05,   k06,   k07,   k08,   k09,   k0A,   k0B,   k0C,   k0D,  k0E   }, \
+    { k10,   k11,   k12,   k13,   k14,   k15,   k16,   k17,   k18,   k19,   k1A,   k1B,   k1C,   k1D,  k1E   }, \
+    { k20,   KC_NO, k22,   k23,   k24,   k25,   k26,   k27,   k28,   k29,   k2A,   k2B,   k2C,   k2D,  k2E   }, \
+    { KC_NO, k31,   k32,   k33,   k34,   k35,   k36,   k37,   k38,   k39,   k3A,   k3B,   k3C,   k3D,  k3E   }, \
+    { k40,   k41,   k42,   KC_NO, KC_NO, KC_NO, k46,   KC_NO, KC_NO, k49,   k4A,   k4B,   k4C,   k4D,  k4E   }, \
+}
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/rules.mk b/keyboards/kprepublic/bm68hsrgb/rev1/rules.mk
new file mode 100644
index 0000000000..92c37f393b
--- /dev/null
+++ b/keyboards/kprepublic/bm68hsrgb/rev1/rules.mk
@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
+LTO_ENABLE = yes
+
+LAYOUTS = 65_ansi