(Re)Fixing K-type RGB lighting (#12084)

* initial rgb driver fix

* added underglow LEDs and fixed typo in RGB locations

* removed test code

* added my key maps

* updated rgb keymap to work with changes

* refactored my code to make it more maintainable and updated keymaps.

* added GPL licence

* Turned off matrix scan rate debug info

* added checks if RGB matrix is enabled to fix errors when building keymaps without RGB matrix enabled

* Apply suggestions from code review by fauxpark

Co-authored-by: Ryan <fauxpark@gmail.com>

* Renamed led driver file to be less ambiguous

* Renamed is31fl3733 driver files to is31fl3733-dual

Co-authored-by: Ryan <fauxpark@gmail.com>

14 files changed, 1077 insertions, 103 deletions

diff --git a/keyboards/k_type/i2c_master.c b/keyboards/k_type/i2c_master.c
new file mode 100644
index 0000000000..62d732c2d0
--- /dev/null
+++ b/keyboards/k_type/i2c_master.c
@@ -0,0 +1,150 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This library is only valid for STM32 processors.
+ * This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
+ * but using any other I2C pins should be trivial.
+ */
+
+#ifdef RGB_MATRIX_ENABLE
+
+
+#include "quantum.h"
+#include "i2c_master.h"
+#include <string.h>
+#include <hal.h>
+
+static uint8_t i2c_address;
+
+I2CDriver *drivers[I2C_COUNT];
+
+static const I2CConfig i2cconfig = {
+#if defined(USE_I2CV1_CONTRIB)
+    I2C1_CLOCK_SPEED,
+#elif defined(USE_I2CV1)
+    I2C1_OPMODE,
+    I2C1_CLOCK_SPEED,
+    I2C1_DUTY_CYCLE,
+#else
+    // This configures the I2C clock to 400khz assuming a 72Mhz clock
+    // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+    STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
+#endif
+};
+
+static i2c_status_t chibios_to_qmk(const msg_t* status) {
+    switch (*status) {
+        case I2C_NO_ERROR:
+            return I2C_STATUS_SUCCESS;
+        case I2C_TIMEOUT:
+            return I2C_STATUS_TIMEOUT;
+        // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
+        default:
+            return I2C_STATUS_ERROR;
+    }
+}
+
+__attribute__((weak)) void i2c_init(I2CDriver *driver, ioportid_t scl_port, ioportid_t sda_port, iopadid_t scl_pad, iopadid_t sda_pad) {
+    static uint8_t index = 0;
+    if (index < I2C_COUNT) {
+        
+        // Try releasing special pins for a short time
+        palSetPadMode(scl_port, scl_pad, PAL_MODE_INPUT);
+        palSetPadMode(sda_port, sda_pad, PAL_MODE_INPUT);
+
+        chThdSleepMilliseconds(10);
+
+#if defined(USE_GPIOV1)
+        palSetPadMode(scl_port, scl_pad, I2C1_SCL_PAL_MODE);
+        palSetPadMode(sda_port, sda_pad, I2C1_SDA_PAL_MODE);
+#else
+        palSetPadMode(scl_port, scl_pad, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+        palSetPadMode(sda_port, sda_pad, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+#endif
+
+        drivers[index++] = driver;
+    }
+}
+
+i2c_status_t i2c_start(uint8_t index, uint8_t address) {
+    if(index >= I2C_COUNT) {
+        return I2C_STATUS_ERROR;
+    }
+    i2c_address = address;
+    i2cStart(drivers[index], &i2cconfig);
+    return I2C_STATUS_SUCCESS;
+}
+
+i2c_status_t i2c_transmit(uint8_t index, uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
+    if(index >= I2C_COUNT) {
+        return I2C_STATUS_ERROR;
+    }
+    i2c_address = address;
+    i2cStart(drivers[index], &i2cconfig);
+    msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), data, length, 0, 0, TIME_MS2I(timeout));
+    return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_receive(uint8_t index, uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
+    if(index >= I2C_COUNT) {
+        return I2C_STATUS_ERROR;
+    }
+    i2c_address = address;
+    i2cStart(drivers[index], &i2cconfig);
+    msg_t status = i2cMasterReceiveTimeout(drivers[index], (i2c_address >> 1), data, length, TIME_MS2I(timeout));
+    return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_writeReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
+    if(index >= I2C_COUNT) {
+        return I2C_STATUS_ERROR;
+    }
+    i2c_address = devaddr;
+    i2cStart(drivers[index], &i2cconfig);
+
+    uint8_t complete_packet[length + 1];
+    for (uint8_t i = 0; i < length; i++) {
+        complete_packet[i + 1] = data[i];
+    }
+    complete_packet[0] = regaddr;
+
+    msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), complete_packet, length + 1, 0, 0, TIME_MS2I(timeout));
+    return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_readReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
+    if(index >= I2C_COUNT) {
+        return I2C_STATUS_ERROR;
+    }
+    i2c_address = devaddr;
+    i2cStart(drivers[index], &i2cconfig);
+    msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), &regaddr, 1, data, length, TIME_MS2I(timeout));
+    return chibios_to_qmk(&status);
+}
+
+void i2c_stop(uint8_t index) {
+    if(index < I2C_COUNT) {
+        i2cStop(drivers[index]);
+    }
+}
+
+#endif
diff --git a/keyboards/k_type/i2c_master.h b/keyboards/k_type/i2c_master.h
new file mode 100644
index 0000000000..5a7893fae8
--- /dev/null
+++ b/keyboards/k_type/i2c_master.h
@@ -0,0 +1,127 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
+ */
+#pragma once
+
+#include <ch.h>
+#include <hal.h>
+
+#ifndef I2C_COUNT
+#    define I2C_COUNT 1
+#endif
+
+#ifdef I2C1_BANK
+#    define I2C1_SCL_BANK I2C1_BANK
+#    define I2C1_SDA_BANK I2C1_BANK
+#endif
+
+#ifndef I2C1_SCL_BANK
+#    define I2C1_SCL_BANK GPIOB
+#endif
+
+#ifndef I2C1_SDA_BANK
+#    define I2C1_SDA_BANK GPIOB
+#endif
+
+
+#ifdef USE_I2C2
+#    ifdef I2C2_BANK
+#        define I2C2_SCL_BANK I2C2_BANK
+#        define I2C2_SDA_BANK I2C2_BANK
+#    endif
+#    ifndef I2C2_SCL_BANK
+#        define I2C2_SCL_BANK GPIOC
+#    endif
+#    ifndef I2C2_SDA_BANK
+#        define I2C2_SDA_BANK GPIOC
+#    endif
+#endif
+
+#ifndef I2C1_SCL
+#    define I2C1_SCL 6
+#endif
+#ifndef I2C1_SDA
+#    define I2C1_SDA 7
+#endif
+
+#ifdef USE_I2CV1
+#    ifndef I2C1_OPMODE
+#        define I2C1_OPMODE OPMODE_I2C
+#    endif
+#    ifndef I2C1_CLOCK_SPEED
+#        define I2C1_CLOCK_SPEED 100000 /* 400000 */
+#    endif
+#    ifndef I2C1_DUTY_CYCLE
+#        define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
+#    endif
+#else
+// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+#    ifndef I2C1_TIMINGR_PRESC
+#        define I2C1_TIMINGR_PRESC 0U
+#    endif
+#    ifndef I2C1_TIMINGR_SCLDEL
+#        define I2C1_TIMINGR_SCLDEL 7U
+#    endif
+#    ifndef I2C1_TIMINGR_SDADEL
+#        define I2C1_TIMINGR_SDADEL 0U
+#    endif
+#    ifndef I2C1_TIMINGR_SCLH
+#        define I2C1_TIMINGR_SCLH 38U
+#    endif
+#    ifndef I2C1_TIMINGR_SCLL
+#        define I2C1_TIMINGR_SCLL 129U
+#    endif
+#endif
+
+#ifdef USE_GPIOV1
+#    ifndef I2C1_SCL_PAL_MODE
+#        define I2C1_SCL_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+#    endif
+#    ifndef I2C1_SDA_PAL_MODE
+#        define I2C1_SDA_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+#    endif
+#else
+// The default PAL alternate modes are used to signal that the pins are used for I2C
+#    ifndef I2C1_SCL_PAL_MODE
+#        define I2C1_SCL_PAL_MODE 4
+#    endif
+#    ifndef I2C1_SDA_PAL_MODE
+#        define I2C1_SDA_PAL_MODE 4
+#    endif
+#endif
+
+typedef int16_t i2c_status_t;
+
+#define I2C_STATUS_SUCCESS (0)
+#define I2C_STATUS_ERROR (-1)
+#define I2C_STATUS_TIMEOUT (-2)
+
+void         i2c_init(I2CDriver *driver, ioportid_t scl_port, ioportid_t sda_port, iopadid_t scl_pad, iopadid_t sda_pad);
+i2c_status_t i2c_start(uint8_t index, uint8_t address);
+i2c_status_t i2c_transmit(uint8_t index, uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_receive(uint8_t index, uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_writeReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_readReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
+void         i2c_stop(uint8_t index);
diff --git a/keyboards/k_type/is31fl3733-dual.c b/keyboards/k_type/is31fl3733-dual.c
new file mode 100644
index 0000000000..8f39e73c69
--- /dev/null
+++ b/keyboards/k_type/is31fl3733-dual.c
@@ -0,0 +1,236 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef RGB_MATRIX_ENABLE
+
+#include "is31fl3733-dual.h"
+#include "i2c_master.h"
+#include "wait.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define ISSI_ADDR_DEFAULT 0x50
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
+#define ISSI_INTERRUPTMASKREGISTER 0xF0
+#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+
+#define ISSI_PAGE_LEDCONTROL 0x00  // PG0
+#define ISSI_PAGE_PWM 0x01         // PG1
+#define ISSI_PAGE_AUTOBREATH 0x02  // PG2
+#define ISSI_PAGE_FUNCTION 0x03    // PG3
+
+#define ISSI_REG_CONFIGURATION 0x00  // PG3
+#define ISSI_REG_GLOBALCURRENT 0x01  // PG3
+#define ISSI_REG_RESET 0x11          // PG3
+#define ISSI_REG_SWPULLUP 0x0F       // PG3
+#define ISSI_REG_CSPULLUP 0x10       // PG3
+
+#ifndef ISSI_TIMEOUT
+#    define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+#    define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3733 PWM registers.
+// The control buffers match the PG0 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][192];
+bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
+
+uint8_t g_led_control_registers[DRIVER_COUNT][24]             = {{0}, {0}};
+bool    g_led_control_registers_update_required[DRIVER_COUNT] = {false};
+
+bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data) {
+    // If the transaction fails function returns false.
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+#if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+            return false;
+        }
+    }
+#else
+    if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+        return false;
+    }
+#endif
+    return true;
+}
+
+bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer) {
+    // Assumes PG1 is already selected.
+    // If any of the transactions fails function returns false.
+    // Transmit PWM registers in 12 transfers of 16 bytes.
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // Iterate over the pwm_buffer contents at 16 byte intervals.
+    for (int i = 0; i < 192; i += 16) {
+        g_twi_transfer_buffer[0] = i;
+        // Copy the data from i to i+15.
+        // Device will auto-increment register for data after the first byte
+        // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
+        for (int j = 0; j < 16; j++) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+#if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+                return false;
+            }
+        }
+#else
+        if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+            return false;
+        }
+#endif
+    }
+    return true;
+}
+
+void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync) {
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, shutdown is enabled last.
+    // Set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+    // Sync is passed so set it according to the datasheet.
+
+    // Unlock the command register.
+    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    // Select PG0
+    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+    // Turn off all LEDs.
+    for (int i = 0x00; i <= 0x17; i++) {
+        IS31FL3733_write_register(bus, addr, i, 0x00);
+    }
+    // Unlock the command register.
+    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    // Select PG1
+    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+    // Set PWM on all LEDs to 0
+    // No need to setup Breath registers to PWM as that is the default.
+    for (int i = 0x00; i <= 0xBF; i++) {
+        IS31FL3733_write_register(bus, addr, i, 0x00);
+    }
+    // Unlock the command register.
+    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    // Select PG3
+    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+    // Set global current to maximum.
+    IS31FL3733_write_register(bus, addr, ISSI_REG_GLOBALCURRENT, 0xFF);
+    // Disable software shutdown.
+    IS31FL3733_write_register(bus, addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01);
+    // Wait 10ms to ensure the device has woken up.
+    wait_ms(10);
+}
+
+void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    if (index >= 0 && index < DRIVER_LED_TOTAL) {
+        is31_led led = g_is31_leds[index];
+
+        g_pwm_buffer[led.driver][led.r]          = red;
+        g_pwm_buffer[led.driver][led.g]          = green;
+        g_pwm_buffer[led.driver][led.b]          = blue;
+        g_pwm_buffer_update_required[led.driver] = true;
+    }
+}
+
+void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+    for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        IS31FL3733_set_color(i, red, green, blue);
+    }
+}
+
+void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
+    is31_led led = g_is31_leds[index];
+
+    uint8_t control_register_r = led.r / 8;
+    uint8_t control_register_g = led.g / 8;
+    uint8_t control_register_b = led.b / 8;
+    uint8_t bit_r              = led.r % 8;
+    uint8_t bit_g              = led.g % 8;
+    uint8_t bit_b              = led.b % 8;
+
+    if (red) {
+        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+    } else {
+        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+    }
+    if (green) {
+        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+    } else {
+        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+    }
+    if (blue) {
+        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+    } else {
+        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+    }
+
+    g_led_control_registers_update_required[led.driver] = true;
+}
+
+void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
+    if (g_pwm_buffer_update_required[index]) {
+        // Firstly we need to unlock the command register and select PG1.
+        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+
+        // If any of the transactions fail we risk writing dirty PG0,
+        // refresh page 0 just in case.
+        if (!IS31FL3733_write_pwm_buffer(index, addr, g_pwm_buffer[index])) {
+            g_led_control_registers_update_required[index] = true;
+        }
+    }
+    g_pwm_buffer_update_required[index] = false;
+}
+
+void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index) {
+    if (g_led_control_registers_update_required[index]) {
+        // Firstly we need to unlock the command register and select PG0
+        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+        for (int i = 0; i < 24; i++) {
+            IS31FL3733_write_register(index, addr, i, g_led_control_registers[index][i]);
+        }
+    }
+    g_led_control_registers_update_required[index] = false;
+}
+
+
+#endif
diff --git a/keyboards/k_type/is31fl3733-dual.h b/keyboards/k_type/is31fl3733-dual.h
new file mode 100644
index 0000000000..272bcdc417
--- /dev/null
+++ b/keyboards/k_type/is31fl3733-dual.h
@@ -0,0 +1,251 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+typedef struct is31_led {
+    uint8_t driver : 2;
+    uint8_t r;
+    uint8_t g;
+    uint8_t b;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+
+void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync);
+bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data);
+bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer);
+
+void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
+
+void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); // index is the driver index
+void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index);
+
+#define A_1 0x00
+#define A_2 0x01
+#define A_3 0x02
+#define A_4 0x03
+#define A_5 0x04
+#define A_6 0x05
+#define A_7 0x06
+#define A_8 0x07
+#define A_9 0x08
+#define A_10 0x09
+#define A_11 0x0A
+#define A_12 0x0B
+#define A_13 0x0C
+#define A_14 0x0D
+#define A_15 0x0E
+#define A_16 0x0F
+
+#define B_1 0x10
+#define B_2 0x11
+#define B_3 0x12
+#define B_4 0x13
+#define B_5 0x14
+#define B_6 0x15
+#define B_7 0x16
+#define B_8 0x17
+#define B_9 0x18
+#define B_10 0x19
+#define B_11 0x1A
+#define B_12 0x1B
+#define B_13 0x1C
+#define B_14 0x1D
+#define B_15 0x1E
+#define B_16 0x1F
+
+#define C_1 0x20
+#define C_2 0x21
+#define C_3 0x22
+#define C_4 0x23
+#define C_5 0x24
+#define C_6 0x25
+#define C_7 0x26
+#define C_8 0x27
+#define C_9 0x28
+#define C_10 0x29
+#define C_11 0x2A
+#define C_12 0x2B
+#define C_13 0x2C
+#define C_14 0x2D
+#define C_15 0x2E
+#define C_16 0x2F
+
+#define D_1 0x30
+#define D_2 0x31
+#define D_3 0x32
+#define D_4 0x33
+#define D_5 0x34
+#define D_6 0x35
+#define D_7 0x36
+#define D_8 0x37
+#define D_9 0x38
+#define D_10 0x39
+#define D_11 0x3A
+#define D_12 0x3B
+#define D_13 0x3C
+#define D_14 0x3D
+#define D_15 0x3E
+#define D_16 0x3F
+
+#define E_1 0x40
+#define E_2 0x41
+#define E_3 0x42
+#define E_4 0x43
+#define E_5 0x44
+#define E_6 0x45
+#define E_7 0x46
+#define E_8 0x47
+#define E_9 0x48
+#define E_10 0x49
+#define E_11 0x4A
+#define E_12 0x4B
+#define E_13 0x4C
+#define E_14 0x4D
+#define E_15 0x4E
+#define E_16 0x4F
+
+#define F_1 0x50
+#define F_2 0x51
+#define F_3 0x52
+#define F_4 0x53
+#define F_5 0x54
+#define F_6 0x55
+#define F_7 0x56
+#define F_8 0x57
+#define F_9 0x58
+#define F_10 0x59
+#define F_11 0x5A
+#define F_12 0x5B
+#define F_13 0x5C
+#define F_14 0x5D
+#define F_15 0x5E
+#define F_16 0x5F
+
+#define G_1 0x60
+#define G_2 0x61
+#define G_3 0x62
+#define G_4 0x63
+#define G_5 0x64
+#define G_6 0x65
+#define G_7 0x66
+#define G_8 0x67
+#define G_9 0x68
+#define G_10 0x69
+#define G_11 0x6A
+#define G_12 0x6B
+#define G_13 0x6C
+#define G_14 0x6D
+#define G_15 0x6E
+#define G_16 0x6F
+
+#define H_1 0x70
+#define H_2 0x71
+#define H_3 0x72
+#define H_4 0x73
+#define H_5 0x74
+#define H_6 0x75
+#define H_7 0x76
+#define H_8 0x77
+#define H_9 0x78
+#define H_10 0x79
+#define H_11 0x7A
+#define H_12 0x7B
+#define H_13 0x7C
+#define H_14 0x7D
+#define H_15 0x7E
+#define H_16 0x7F
+
+#define I_1 0x80
+#define I_2 0x81
+#define I_3 0x82
+#define I_4 0x83
+#define I_5 0x84
+#define I_6 0x85
+#define I_7 0x86
+#define I_8 0x87
+#define I_9 0x88
+#define I_10 0x89
+#define I_11 0x8A
+#define I_12 0x8B
+#define I_13 0x8C
+#define I_14 0x8D
+#define I_15 0x8E
+#define I_16 0x8F
+
+#define J_1 0x90
+#define J_2 0x91
+#define J_3 0x92
+#define J_4 0x93
+#define J_5 0x94
+#define J_6 0x95
+#define J_7 0x96
+#define J_8 0x97
+#define J_9 0x98
+#define J_10 0x99
+#define J_11 0x9A
+#define J_12 0x9B
+#define J_13 0x9C
+#define J_14 0x9D
+#define J_15 0x9E
+#define J_16 0x9F
+
+#define K_1 0xA0
+#define K_2 0xA1
+#define K_3 0xA2
+#define K_4 0xA3
+#define K_5 0xA4
+#define K_6 0xA5
+#define K_7 0xA6
+#define K_8 0xA7
+#define K_9 0xA8
+#define K_10 0xA9
+#define K_11 0xAA
+#define K_12 0xAB
+#define K_13 0xAC
+#define K_14 0xAD
+#define K_15 0xAE
+#define K_16 0xAF
+
+#define L_1 0xB0
+#define L_2 0xB1
+#define L_3 0xB2
+#define L_4 0xB3
+#define L_5 0xB4
+#define L_6 0xB5
+#define L_7 0xB6
+#define L_8 0xB7
+#define L_9 0xB8
+#define L_10 0xB9
+#define L_11 0xBA
+#define L_12 0xBB
+#define L_13 0xBC
+#define L_14 0xBD
+#define L_15 0xBE
+#define L_16 0xBF
diff --git a/keyboards/k_type/k_type-rgbdriver.c b/keyboards/k_type/k_type-rgbdriver.c
new file mode 100644
index 0000000000..8369aa909e
--- /dev/null
+++ b/keyboards/k_type/k_type-rgbdriver.c
@@ -0,0 +1,57 @@
+/* Copyright 2021 Andrew Fahmy
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef RGB_MATRIX_ENABLE
+
+#include "rgb_matrix.h"
+#include "i2c_master.h"
+#include "is31fl3733-dual.h"
+
+
+
+static void init(void) {
+    i2c_init(&I2CD1, I2C1_SCL_BANK, I2C1_SDA_BANK, I2C1_SCL, I2C1_SDA);
+    IS31FL3733_init(0, DRIVER_ADDR_1, 0);
+#    ifdef USE_I2C2
+    i2c_init(&I2CD2, I2C2_SCL_BANK, I2C2_SDA_BANK, I2C2_SCL, I2C2_SDA);
+    IS31FL3733_init(1, DRIVER_ADDR_2, 0);
+#    endif
+    for (int index = 0; index < DRIVER_LED_TOTAL; index++) {
+        bool enabled = true;
+        // This only caches it for later
+        IS31FL3733_set_led_control_register(index, enabled, enabled, enabled);
+    }
+    IS31FL3733_update_led_control_registers(DRIVER_ADDR_1, 0);
+#    ifdef USE_I2C2
+    IS31FL3733_update_led_control_registers(DRIVER_ADDR_2, 1);
+#    endif
+}
+
+static void flush(void) {
+    IS31FL3733_update_pwm_buffers(DRIVER_ADDR_1, 0);
+#    ifdef USE_I2C2
+    IS31FL3733_update_pwm_buffers(DRIVER_ADDR_2, 1);
+#    endif
+}
+
+const rgb_matrix_driver_t rgb_matrix_driver = {
+    .init = init,
+    .flush = flush,
+    .set_color = IS31FL3733_set_color,
+    .set_color_all = IS31FL3733_set_color_all,
+};
+
+#endif
diff --git a/keyboards/k_type/k_type.c b/keyboards/k_type/k_type.c
index ae62f0e723..61c5881454 100644
--- a/keyboards/k_type/k_type.c
+++ b/keyboards/k_type/k_type.c
@@ -17,7 +17,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "k_type.h"
 
+
 #ifdef RGB_MATRIX_ENABLE
+
+#include "is31fl3733-dual.h"
+
+
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     { 0, B_1,  A_1,  C_1  },
     { 0, B_2,  A_2,  C_2  },
@@ -45,11 +50,11 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     { 0, E_7,  D_7,  F_7  },
     { 0, E_8,  D_8,  F_8  },
     { 0, E_9,  D_9,  F_9  },
-    { 0, E_10, D_1,  F_10 },
-    { 0, E_11, D_1,  F_11 },
-    { 0, E_12, D_1,  F_12 },
-    { 0, E_13, D_1,  F_13 },
-    { 0, E_14, D_1,  F_14 },
+    { 0, E_10, D_10, F_10 },
+    { 0, E_11, D_11, F_11 },
+    { 0, E_12, D_12, F_12 },
+    { 0, E_13, D_13, F_13 },
+    { 0, E_14, D_14, F_14 },
     { 0, E_15, D_15, F_15 },
     { 0, E_16, D_16, F_16 },
 
@@ -62,11 +67,11 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     { 0, H_7,  G_7,  I_7  },
     { 0, H_8,  G_8,  I_8  },
     { 0, H_9,  G_9,  I_9  },
-    { 0, H_10, G_1,  I_10 },
-    { 0, H_11, G_1,  I_11 },
-    { 0, H_12, G_1,  I_12 },
-    { 0, H_13, G_1,  I_13 },
-    { 0, H_14, G_1,  I_14 },
+    { 0, H_10, G_10,  I_10 },
+    { 0, H_11, G_11,  I_11 },
+    { 0, H_12, G_12,  I_12 },
+    { 0, H_13, G_13,  I_13 },
+    { 0, H_14, G_14,  I_14 },
     { 0, H_15, G_15, I_15 },
     { 0, H_16, G_16, I_16 },
 
@@ -79,106 +84,123 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     { 0, K_7,  J_7,  L_7  },
     { 0, K_8,  J_8,  L_8  },
     { 0, K_9,  J_9,  L_9  },
-    { 0, K_10, J_1,  L_10 },
-    { 0, K_11, J_1,  L_11 },
-    { 0, K_12, J_1,  L_12 },
-    { 0, K_13, J_1,  L_13 },
-    { 0, K_14, J_1,  L_14 },
+    { 0, K_10, J_10,  L_10 },
+    { 0, K_11, J_11,  L_11 },
+    { 0, K_12, J_12,  L_12 },
+    { 0, K_13, J_13,  L_13 },
+    { 0, K_14, J_14,  L_14 },
     { 0, K_15, J_15, L_15 },
     { 0, K_16, J_16, L_16 },
 
     // Driver 2 is on I2C2 - currently not usable with i2c_master
-    //{ 1, B_1,  A_1,  C_1  },
-    //{ 1, B_2,  A_2,  C_2  },
-    //{ 1, B_3,  A_3,  C_3  },
-    //{ 1, B_4,  A_4,  C_4  },
-    //{ 1, B_5,  A_5,  C_5  },
-    //{ 1, B_6,  A_6,  C_6  },
-    //{ 1, B_7,  A_7,  C_7  },
-    //{ 1, B_8,  A_8,  C_8  },
-    //{ 1, B_9,  A_9,  C_9  },
-    //{ 1, B_10, A_10, C_10 },
-    //{ 1, B_11, A_11, C_11 },
-    //{ 1, B_12, A_12, C_12 },
-    //{ 1, B_13, A_13, C_13 },
-    //{ 1, B_14, A_14, C_14 },
-    //{ 1, B_15, A_15, C_15 },
-    //{ 1, B_16, A_16, C_16 },
-
-    //{ 1, E_1,  D_1,  F_1  },
-    //{ 1, E_2,  D_2,  F_2  },
-    //{ 1, E_3,  D_3,  F_3  },
-    //{ 1, E_4,  D_4,  F_4  },
-    //{ 1, E_5,  D_5,  F_5  },
-    //{ 1, E_6,  D_6,  F_6  },
-    //{ 1, E_7,  D_7,  F_7  },
-    //{ 1, E_8,  D_8,  F_8  },
-    //{ 1, E_9,  D_9,  F_9  },
-    //{ 1, E_10, D_1,  F_10 },
-    //{ 1, E_11, D_1,  F_11 },
-    //{ 1, E_12, D_1,  F_12 },
-    //{ 1, E_13, D_1,  F_13 },
-    //{ 1, E_14, D_1,  F_14 },
-    //{ 1, E_15, D_15, F_15 },
-    //{ 1, E_16, D_16, F_16 },
-
-    //{ 1, H_1,  G_1,  I_1  },
-    //{ 1, H_2,  G_2,  I_2  },
-    //{ 1, H_3,  G_3,  I_3  },
-    //{ 1, H_4,  G_4,  I_4  },
-    //{ 1, H_5,  G_5,  I_5  },
-    //{ 1, H_6,  G_6,  I_6  },
-    //{ 1, H_7,  G_7,  I_7  },
-    //{ 1, H_8,  G_8,  I_8  },
-    //{ 1, H_9,  G_9,  I_9  },
-    //{ 1, H_10, G_1,  I_10 },
-    //{ 1, H_11, G_1,  I_11 },
-    //{ 1, H_12, G_1,  I_12 },
-    //{ 1, H_13, G_1,  I_13 },
-    //{ 1, H_14, G_1,  I_14 },
-    //{ 1, H_15, G_15, I_15 },
-    //{ 1, H_16, G_16, I_16 },
-
-    //{ 1, K_1,  J_1,  L_1  },
-    //{ 1, K_2,  J_2,  L_2  },
-    //{ 1, K_3,  J_3,  L_3  },
-    //{ 1, K_4,  J_4,  L_4  },
-    //{ 1, K_5,  J_5,  L_5  },
-    //{ 1, K_6,  J_6,  L_6  },
-    //{ 1, K_7,  J_7,  L_7  }
+    { 1, B_1,  A_1,  C_1  },
+    { 1, B_2,  A_2,  C_2  },
+    { 1, B_3,  A_3,  C_3  },
+    { 1, B_4,  A_4,  C_4  },
+    { 1, B_5,  A_5,  C_5  },
+    { 1, B_6,  A_6,  C_6  },
+    { 1, B_7,  A_7,  C_7  },
+    { 1, B_8,  A_8,  C_8  },
+    { 1, B_9,  A_9,  C_9  },
+    { 1, B_10, A_10, C_10 },
+    { 1, B_11, A_11, C_11 },
+    { 1, B_12, A_12, C_12 },
+    { 1, B_13, A_13, C_13 },
+    { 1, B_14, A_14, C_14 },
+    { 1, B_15, A_15, C_15 },
+    { 1, B_16, A_16, C_16 },
+
+    { 1, E_1,  D_1,  F_1  },
+    { 1, E_2,  D_2,  F_2  },
+    { 1, E_3,  D_3,  F_3  },
+    { 1, E_4,  D_4,  F_4  },
+    { 1, E_5,  D_5,  F_5  },
+    { 1, E_6,  D_6,  F_6  },
+    { 1, E_7,  D_7,  F_7  },
+    { 1, E_8,  D_8,  F_8  },
+    { 1, E_9,  D_9,  F_9  },
+    { 1, E_10, D_10, F_10 },
+    { 1, E_11, D_11, F_11 },
+    { 1, E_12, D_12, F_12 },
+    { 1, E_13, D_13, F_13 },
+    { 1, E_14, D_14, F_14 },
+    { 1, E_15, D_15, F_15 },
+    { 1, E_16, D_16, F_16 },
+
+    { 1, H_1,  G_1,  I_1  },
+    { 1, H_2,  G_2,  I_2  },
+    { 1, H_3,  G_3,  I_3  },
+    { 1, H_4,  G_4,  I_4  },
+    { 1, H_5,  G_5,  I_5  },
+    { 1, H_6,  G_6,  I_6  },
+    { 1, H_7,  G_7,  I_7  },
+    { 1, H_8,  G_8,  I_8  },
+    { 1, H_9,  G_9,  I_9  },
+    { 1, H_10, G_10, I_10 },
+    { 1, H_11, G_11, I_11 },
+    { 1, H_12, G_12, I_12 },
+    { 1, H_13, G_13, I_13 },
+    { 1, H_14, G_14, I_14 },
+    { 1, H_15, G_15, I_15 },
+    { 1, H_16, G_16, I_16 },
+
+    { 1, K_1,  J_1,  L_1  },
+    { 1, K_2,  J_2,  L_2  },
+    { 1, K_3,  J_3,  L_3  },
+    { 1, K_4,  J_4,  L_4  },
+    { 1, K_5,  J_5,  L_5  },
+    { 1, K_6,  J_6,  L_6  },
+    { 1, K_7,  J_7,  L_7  }
 };
 
 led_config_t g_led_config = {
     {
         // Key Matrix to LED Index
-        {   0,  10,     20,     29,     38,  47,     57, NO_LED, NO_LED, NO_LED },
-        {   1,  11,     21, NO_LED,     39,  48,     58, NO_LED, NO_LED, NO_LED },
-        {   2,  12,     22,     30,     40,  49,     59, NO_LED, NO_LED, NO_LED },
-        {   3,  13,     23,     31,     41,  50,     60, NO_LED, NO_LED, NO_LED },
-        {   4,  14,     24,     32,     42,  51,     61, NO_LED, NO_LED, NO_LED },
-        {   5,  15,     25,     33,     43,  52, NO_LED, NO_LED, NO_LED, NO_LED },
-        {   6,  16,     26,     34,     44,  53,     62, NO_LED, NO_LED, NO_LED },
-        {   7,  17,     27,     35,     45,  54, NO_LED, NO_LED, NO_LED, NO_LED },
-        {   8,  18,     28,     36,     46,  55,     63, NO_LED, NO_LED, NO_LED },
-        {   9,  19, NO_LED,     37, NO_LED,  56, NO_LED, NO_LED, NO_LED, NO_LED }
+        {      0,      1,      2,      3,      4,      5,      6,      7,      8,      9 },
+        {     10,     11,     12,     13,     14,     15,     16,     17,     18,     19 },
+        {     20,     21,     22,     23,     24,     25,     26,     27,     28, NO_LED },
+        {     29, NO_LED,     30,     31,     32,     33,     34,     35,     36,     37 },
+        {     38,     39,     40,     41,     42,     43,     44,     45,     46, NO_LED },
+        {     47,     48,     49,     50,     51,     52,     53,     54,     55,     56 },
+        {     57,     58,     59,     60,     61, NO_LED,     62, NO_LED,     63, NO_LED },
+        {     64,     65,     66,     67,     68,     69,     70,     71,     72,     73 },
+        { NO_LED,     74, NO_LED,     75,     76,     77,     78,     79,     80,     81 },
+        {     82,     83,     84,     85,     86, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }
     }, {
         // LED Index to Physical Position
+        // Key LED
         { 0,  0    },                   { 26.35,  0    }, { 39.53,  0    }, { 52.71,  0    }, { 65.88,  0    }, { 79.06,  0    }, { 92.24,  0    }, { 105.41,  0    }, { 118.59,  0    }, { 131.77,  0    }, { 144.94,  0    }, { 158.12,  0    }, { 171.29,  0    },           { 197.65,  0    }, { 210.82,  0    }, { 224,  0    },
 
         { 0, 21.33 }, { 13.18, 21.33 }, { 26.35, 21.33 }, { 39.53, 21.33 }, { 52.71, 21.33 }, { 65.88, 21.33 }, { 79.06, 21.33 }, { 92.24, 21.33 }, { 105.41, 21.33 }, { 118.59, 21.33 }, { 131.77, 21.33 }, { 144.94, 21.33 }, { 158.12, 21.33 }, { 171.29, 21.33 },           { 197.65, 21.33 }, { 210.82, 21.33 }, { 224, 21.33 },
         { 0, 32    }, { 13.18, 32    }, { 26.35, 32    }, { 39.53, 32    }, { 52.71, 32    }, { 65.88, 32    }, { 79.06, 32    }, { 92.24, 32    }, { 105.41, 32    }, { 118.59, 32    }, { 131.77, 32    }, { 144.94, 32    }, { 158.12, 32    }, { 171.29, 32    },           { 197.65, 32    }, { 210.82, 32    }, { 224, 32    },
         { 0, 42.67 }, { 13.18, 42.67 }, { 26.35, 42.67 }, { 39.53, 42.67 }, { 52.71, 42.67 }, { 65.88, 42.67 }, { 79.06, 42.67 }, { 92.24, 42.67 }, { 105.41, 42.67 }, { 118.59, 42.67 }, { 131.77, 42.67 }, { 144.94, 42.67 },                    { 171.29, 42.67 },
-        { 0, 53.33 },                 //{ 26.35, 53.33 }, { 39.53, 53.33 }, { 52.71, 53.33 }, { 65.88, 53.33 }, { 79.06, 53.33 }, { 92.24, 53.33 }, { 105.41, 53.33 }, { 118.59, 53.33 }, { 131.77, 53.33 }, { 144.94, 53.33 },                    { 171.29, 53.33 },                              { 210.82, 53.33 },
-      //{ 0, 64    }, { 13.18, 64    }, { 26.35, 64    },                                                       { 79.06, 64    },                                                         { 131.77, 64    }, { 144.94, 64    }, { 158.12, 64    }, { 171.29, 64    },           { 197.65, 64    }, { 210.82, 64    }, { 224, 64    }
+        { 0, 53.33 },                   { 26.35, 53.33 }, { 39.53, 53.33 }, { 52.71, 53.33 }, { 65.88, 53.33 }, { 79.06, 53.33 }, { 92.24, 53.33 }, { 105.41, 53.33 }, { 118.59, 53.33 }, { 131.77, 53.33 }, { 144.94, 53.33 },                    { 171.29, 53.33 },                              { 210.82, 53.33 },
+        { 0, 64    }, { 13.18, 64    }, { 26.35, 64    },                                                       { 79.06, 64    },                                                         { 131.77, 64    }, { 144.94, 64    }, { 158.12, 64    }, { 171.29, 64    },           { 197.65, 64    }, { 210.82, 64    }, { 224, 64    },
+        
+        // Underglow LED
+        { 224, 64 }, { 206.77, 64 }, { 189.54, 64 }, { 172.31, 64 }, { 155.08, 64 }, { 137.85, 64 }, { 120.61, 64 }, { 103.38, 64 }, { 86.15, 64 }, { 68.92, 64 }, { 51.69, 64 }, { 34.46, 64 }, { 17.23, 64 }, { 0, 64 },
+        { 0, 42.67 }, { 0, 21.33 },
+        { 0, 0 }, { 17.23, 0 }, { 34.46, 0 }, { 51.69, 0 }, { 68.92, 0 }, { 86.15, 0 }, { 103.38, 0 }, { 120.61, 0 }, { 137.85, 0 }, { 155.08, 0 }, { 172.31, 0 }, { 189.54, 0 }, { 206.77, 0 }, { 224, 0 },
+        { 224, 21.33 }, { 224, 42.67 }
     }, {
         // LED Index to Flag
-        1,    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    4, 4, 4,
+        //Key LED
+        1,  4, 4, 4, 4,  1, 1, 1, 1,  4, 4, 4, 4,    1, 1, 1,
+
+        1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,    4, 4, 4,
+        1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    4, 4, 4,
+        1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    1,
+        1,    4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    1,       1,
+        1, 1, 1,          4,          1, 1, 1, 1,    1, 1, 1,
+
+        // Underglow LED
+        2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,
+
+        2,                                                  2,
+        
+        2,                                                  2,
 
-        4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    4, 4, 4,
-        4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    4, 4, 4,
-        4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    1,
-        1,  //4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    1,       1,
-      //1, 1, 1,          4,          1, 1, 1, 1,    1, 1, 1
+        2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,
     }
 };
 #endif
diff --git a/keyboards/k_type/keymaps/andrew-fahmy/config.h b/keyboards/k_type/keymaps/andrew-fahmy/config.h
new file mode 100644
index 0000000000..c035255de6
--- /dev/null
+++ b/keyboards/k_type/keymaps/andrew-fahmy/config.h
@@ -0,0 +1,52 @@
+/* Copyright 2021 Andrew Fahmy
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+
+#ifdef RGB_MATRIX_ENABLE
+// #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+// #    define RGB_MATRIX_KEYPRESSES
+#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_RAINDROPS
+
+// #    define DEBUG_MATRIX_SCAN_RATE
+
+#    define RGB_MATRIX_LED_FLUSH_LIMIT 100
+// #    define RGB_MATRIX_LED_PROCESS_LIMIT 2
+
+// i2c_master defines
+#    define I2C_COUNT 2
+
+#    define I2C1_BANK GPIOB
+#    define I2C1_SCL 0 // A2 on pinout = B0
+#    define I2C1_SDA 1 // A2 on pinout = B1
+#    define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
+#    define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
+
+#    define USE_I2C2
+#    define I2C2_BANK GPIOC
+#    define I2C2_SCL 10 // A2 on pinout = C10
+#    define I2C2_SDA 11 // A2 on pinout = C11
+#    define I2C2_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
+#    define I2C2_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
+
+#    define DRIVER_ADDR_1 0b1010000
+#    define DRIVER_ADDR_2 0b1010000
+#    define DRIVER_COUNT 2
+#    define DRIVER_1_LED_TOTAL 64
+#    define DRIVER_2_LED_TOTAL 55
+#    define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+#endif
diff --git a/keyboards/k_type/keymaps/andrew-fahmy/keymap.c b/keyboards/k_type/keymaps/andrew-fahmy/keymap.c
new file mode 100644
index 0000000000..1611c25e41
--- /dev/null
+++ b/keyboards/k_type/keymaps/andrew-fahmy/keymap.c
@@ -0,0 +1,60 @@
+/* Copyright 2021 Andrew Fahmy
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _MAIN,
+    _L1
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_MAIN] = LAYOUT_tkl_ansi(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_PSCR, KC_SLCK, KC_PAUS,
+
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_END,  KC_PGDN,
+        MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,                   KC_UP,
+        KC_LCTL, _______, KC_LALT,                            KC_SPC,                             KC_RALT, MO(_L1), KC_APP,  KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [_L1] = LAYOUT_tkl_ansi(
+        RESET,            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_TOG, RGB_MOD, _______,
+
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPD, RGB_SPI, _______,          RGB_HUI, RGB_SAI, RGB_VAI,
+        _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_HUD, RGB_SAD, RGB_VAD,
+        _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,                   _______,
+        _______, KC_LGUI, _______,                            _______,                            _______, _______, _______, _______,          _______, _______, _______
+    )
+};
+
+void keyboard_post_init_user(void) {
+    // Customise these values to desired behaviour
+    // debug_enable=true;
+    // debug_matrix=true;
+    // debug_keyboard=true;
+    // debug_mouse=true;
+}
+
+#ifdef RGB_MATRIX_ENABLE
+// Turn off SDB
+void keyboard_pre_init_user() {
+    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(GPIOB, 16);
+}
+
+#endif
diff --git a/keyboards/k_type/keymaps/andrew-fahmy/rules.mk b/keyboards/k_type/keymaps/andrew-fahmy/rules.mk
new file mode 100644
index 0000000000..aad92997d0
--- /dev/null
+++ b/keyboards/k_type/keymaps/andrew-fahmy/rules.mk
@@ -0,0 +1 @@
+RGB_MATRIX_ENABLE = yes
diff --git a/keyboards/k_type/keymaps/rgb/config.h b/keyboards/k_type/keymaps/rgb/config.h
index 206b76f2b6..4c5d234545 100644
--- a/keyboards/k_type/keymaps/rgb/config.h
+++ b/keyboards/k_type/keymaps/rgb/config.h
@@ -2,22 +2,31 @@
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_MATRIX_KEYPRESSES
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+
+#    define RGB_MATRIX_LED_FLUSH_LIMIT 100
+
 
 // i2c_master defines
+#    define I2C_COUNT 2
+
+#    define I2C1_BANK GPIOB
 #    define I2C1_SCL 0 // A2 on pinout = B0
 #    define I2C1_SDA 1 // A2 on pinout = B1
 #    define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
 #    define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
-//#    define I2C2_SCL 10 // A2 on pinout = C10
-//#    define I2C2_SDA 11 // A2 on pinout = C11
-//#    define I2C2_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
-//#    define I2C2_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
+
+#    define USE_I2C2
+#    define I2C2_BANK GPIOC
+#    define I2C2_SCL 10 // A2 on pinout = C10
+#    define I2C2_SDA 11 // A2 on pinout = C11
+#    define I2C2_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
+#    define I2C2_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
 
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_ADDR_2 0b1010001
+#    define DRIVER_ADDR_2 0b1010000
 #    define DRIVER_COUNT 2
 #    define DRIVER_1_LED_TOTAL 64
-//#    define DRIVER_2_LED_TOTAL 55
-#    define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
+#    define DRIVER_2_LED_TOTAL 55
+#    define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 #endif
diff --git a/keyboards/k_type/keymaps/rgb/keymap.c b/keyboards/k_type/keymaps/rgb/keymap.c
index 4ed15e5d66..88f5eaa37b 100644
--- a/keyboards/k_type/keymaps/rgb/keymap.c
+++ b/keyboards/k_type/keymaps/rgb/keymap.c
@@ -8,12 +8,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_END,  KC_PGDN,
         KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
         KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,                   KC_UP,
-        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, MO(1),   KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_APP,  KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
     ),
     [1] = LAYOUT_tkl_ansi(
         _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_TOG, RGB_MOD, _______,
 
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_HUI, RGB_SAI, RGB_VAI,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPD, RGB_SPI, _______,          RGB_HUI, RGB_SAI, RGB_VAI,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_HUD, RGB_SAD, RGB_VAD,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
         _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,                   _______,
diff --git a/keyboards/k_type/keymaps/rgb/readme.md b/keyboards/k_type/keymaps/rgb/readme.md
index 794052c57a..330321976c 100644
--- a/keyboards/k_type/keymaps/rgb/readme.md
+++ b/keyboards/k_type/keymaps/rgb/readme.md
@@ -2,4 +2,6 @@
 
 This is an experimental keymap adding support for RGB Matrix on the K-Type.
 
-The board has two IS31FL3733 LED controllers, but they are each on different I2C buses, which QMK's `i2c_master` implementation currently does not support. As a result, all the keys after the left shift will not be lit.
+The keyboard should now support full RGB lightings. The lighting animations are running at 10 fps for performance reasons.
+You can configure this by changing the `RGB_MATRIX_LED_FLUSH_LIMIT` inside the `config.h` file to a lower value.
+For example `RGB_MATRIX_LED_FLUSH_LIMIT 16` would mean that the animations run every 16 ms or at 60 fps.
diff --git a/keyboards/k_type/mcuconf.h b/keyboards/k_type/mcuconf.h
index 28f3c6cdae..1d9ecf6104 100644
--- a/keyboards/k_type/mcuconf.h
+++ b/keyboards/k_type/mcuconf.h
@@ -51,4 +51,7 @@
 #define KINETIS_I2C_USE_I2C0                TRUE
 #define KINETIS_I2C_I2C0_PRIORITY           4
 
+#define KINETIS_I2C_USE_I2C1                TRUE
+#define KINETIS_I2C_I2C0_PRIORITY           4
+
 #endif /* _MCUCONF_H_ */
diff --git a/keyboards/k_type/rules.mk b/keyboards/k_type/rules.mk
index 18b6e3c8df..369cab4f09 100644
--- a/keyboards/k_type/rules.mk
+++ b/keyboards/k_type/rules.mk
@@ -27,7 +27,11 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 RGB_MATRIX_ENABLE = no
-RGB_MATRIX_DRIVER = IS31FL3733
+RGB_MATRIX_DRIVER = custom
+
+SRC += k_type-rgbdriver.c
+
+QUANTUM_LIB_SRC += i2c_master.c is31fl3733-dual.c
 
 LAYOUTS = tkl_ansi