Merge remote-tracking branch 'origin/master' into develop

10 files changed, 262 insertions, 299 deletions

diff --git a/keyboards/jm60/config.h b/keyboards/jm60/config.h
index f490037f6e..2409142e09 100644
--- a/keyboards/jm60/config.h
+++ b/keyboards/jm60/config.h
@@ -15,39 +15,105 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6464
-#define DEVICE_VER      0x0001
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x6464
+#define DEVICE_VER   0x0001
 #define MANUFACTURER JMWS
-#define PRODUCT JM60 RGB Keyboard(QMK)
-#define DESCRIPTION QMK keyboard firmware for JM60 RGB Keyboard
+#define PRODUCT      JM60
 
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 14
 
-/* number of backlight levels */
-//#define BACKLIGHT_LEVELS 1
-
-//#define LED_BRIGHTNESS_LO       100
-//#define LED_BRIGHTNESS_HI       255
-
-/* define if matrix has ghost */
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B11, B10, B2, B1, B0 }
+#define MATRIX_COL_PINS { A15, C10, C11, C12, D2, B3, B4, B5, B6, B7, B8, B9, A2, A3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+//#define RGB_DI_PIN E2
+//#ifdef RGB_DI_PIN
+//#    define RGBLED_NUM 16
+//#    define RGBLIGHT_HUE_STEP 8
+//#    define RGBLIGHT_SAT_STEP 8
+//#    define RGBLIGHT_VAL_STEP 8
+//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//#    define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//#    define RGBLIGHT_EFFECT_BREATHING
+//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+//#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-
+#define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -63,7 +129,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
 
-#endif
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/jm60/info.json b/keyboards/jm60/info.json
new file mode 100644
index 0000000000..2cc2ce4e37
--- /dev/null
+++ b/keyboards/jm60/info.json
@@ -0,0 +1,78 @@
+{
+    "keyboard_name": "JM60",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_60_ansi": {
+            "layout": [
+                {"x": 0, "y": 0},
+                {"x": 1, "y": 0},
+                {"x": 2, "y": 0},
+                {"x": 3, "y": 0},
+                {"x": 4, "y": 0},
+                {"x": 5, "y": 0},
+                {"x": 6, "y": 0},
+                {"x": 7, "y": 0},
+                {"x": 8, "y": 0},
+                {"x": 9, "y": 0},
+                {"x": 10, "y": 0},
+                {"x": 11, "y": 0},
+                {"x": 12, "y": 0},
+                {"x": 13, "y": 0, "w": 2},
+
+                {"x": 0, "y": 1, "w": 1.5},
+                {"x": 1.5, "y": 1},
+                {"x": 2.5, "y": 1},
+                {"x": 3.5, "y": 1},
+                {"x": 4.5, "y": 1},
+                {"x": 5.5, "y": 1},
+                {"x": 6.5, "y": 1},
+                {"x": 7.5, "y": 1},
+                {"x": 8.5, "y": 1},
+                {"x": 9.5, "y": 1},
+                {"x": 10.5, "y": 1},
+                {"x": 11.5, "y": 1},
+                {"x": 12.5, "y": 1},
+                {"x": 13.5, "y": 1, "w": 1.5},
+
+                {"x": 0, "y": 2, "w": 1.75},
+                {"x": 1.75, "y": 2},
+                {"x": 2.75, "y": 2},
+                {"x": 3.75, "y": 2},
+                {"x": 4.75, "y": 2},
+                {"x": 5.75, "y": 2},
+                {"x": 6.75, "y": 2},
+                {"x": 7.75, "y": 2},
+                {"x": 8.75, "y": 2},
+                {"x": 9.75, "y": 2},
+                {"x": 10.75, "y": 2},
+                {"x": 11.75, "y": 2},
+                {"x": 12.75, "y": 2, "w": 2.25},
+
+                {"x": 0, "y": 3, "w": 2.25},
+                {"x": 2.25, "y": 3},
+                {"x": 3.25, "y": 3},
+                {"x": 4.25, "y": 3},
+                {"x": 5.25, "y": 3},
+                {"x": 6.25, "y": 3},
+                {"x": 7.25, "y": 3},
+                {"x": 8.25, "y": 3},
+                {"x": 9.25, "y": 3},
+                {"x": 10.25, "y": 3},
+                {"x": 11.25, "y": 3},
+                {"x": 12.25, "y": 3, "w": 2.75},
+
+                {"x": 0, "y": 4, "w": 1.25},
+                {"x": 1.25, "y": 4, "w": 1.25},
+                {"x": 2.5, "y": 4, "w": 1.25},
+                {"x": 3.75, "y": 4, "w": 6.25},
+                {"x": 10, "y": 4, "w": 1.25},
+                {"x": 11.25, "y": 4, "w": 1.25},
+                {"x": 12.5, "y": 4, "w": 1.25},
+                {"x": 13.75, "y": 4, "w": 1.25}
+            ]
+        }
+    }
+}
diff --git a/keyboards/jm60/jm60.c b/keyboards/jm60/jm60.c
index 3c8b43db9d..d8fe9cecc1 100644
--- a/keyboards/jm60/jm60.c
+++ b/keyboards/jm60/jm60.c
@@ -14,4 +14,5 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#include QMK_KEYBOARD_H
+
+#include "jm60.h"
diff --git a/keyboards/jm60/jm60.h b/keyboards/jm60/jm60.h
index 34ca4d3d6c..c0af36298d 100644
--- a/keyboards/jm60/jm60.h
+++ b/keyboards/jm60/jm60.h
@@ -14,42 +14,25 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#ifndef JM60_H
-#define JM60_H
+
+#pragma once
 
 #include "quantum.h"
 
-// readability
 #define XXX KC_NO
 
-/* Satan GH60 ANSI layout
-   * ,-----------------------------------------------------------.
-   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
-   * |-----------------------------------------------------------|
-   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
-   * |-----------------------------------------------------------|
-   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2c| 2d    |
-   * |-----------------------------------------------------------|
-   * | 30     | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3b|    3d    |
-   * |-----------------------------------------------------------|
-   * | 40 | 41 | 42 |           46          | 4a | 4b | 4c | 4d  |
-   * `-----------------------------------------------------------'
- */
-#define LAYOUT_ansi( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
-	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2c,      k2d, \
-	k30,      k31, k32, k33, k34, k35, k36, k37, k38, k39, k3b,      k3d, \
-	k40, k41, k42,                k46,                k4a, k4b, k4c, k4d  \
-) \
-{ \
-	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
-	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
-	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c, k2d}, \
-	{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, XXX, k3b, XXX, k3d}, \
-	{k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
+#define LAYOUT_60_ansi( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2C,      k2D, \
+    k30,      k31, k32, k33, k34, k35, k36, k37, k38, k39, k3B,      k3D, \
+    k40, k41, k42,                k46,                k4A, k4B, k4C, k4D \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, XXX, k2C, k2D }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, XXX, k3B, XXX, k3D }, \
+    { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, k4C, k4D } \
 }
 
-#endif
-
-#define KEYMAP_ANSI LAYOUT_ansi
+#define KEYMAP_ANSI LAYOUT_60_ansi
diff --git a/keyboards/jm60/keymaps/default/keymap.c b/keyboards/jm60/keymaps/default/keymap.c
index 6ca04c5056..0940d7efce 100644
--- a/keyboards/jm60/keymaps/default/keymap.c
+++ b/keyboards/jm60/keymaps/default/keymap.c
@@ -1,44 +1,39 @@
 #include QMK_KEYBOARD_H
 
-
-// Used for SHIFT_ESC
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _BL 0
-#define _FL 1
+enum layer_names {
+    _BL,
+    _FL
+};
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Keymap _BL: (Base Layer) Default Layer
-   * ,-----------------------------------------------------------.
-   * |Esc~| 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
-   * |-----------------------------------------------------------|
-   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
-   * |-----------------------------------------------------------|
-   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
-   * |-----------------------------------------------------------|
-   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
-   * |-----------------------------------------------------------|
-   * |Ctrl|Gui |Alt |      Space            |Alt |Gui |FN  |Ctrl |
-   * `-----------------------------------------------------------'
-   */
-[_BL] = KEYMAP_ANSI(
-  KC_GESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC, \
-  KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSLS, \
-  KC_CAPS, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,         KC_ENT,  \
-  KC_LSFT,         KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,         KC_RSFT, \
-  KC_LCTL, KC_LGUI,KC_LALT,                KC_SPC,                                 KC_RALT,KC_RGUI, MO(_FL),KC_RCTL),
+    /* Keymap _BL: (Base Layer) Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc~| 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
+     * |-----------------------------------------------------------|
+     * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl|Gui |Alt |      Space            |Alt |Gui |FN  |Ctrl |
+     * `-----------------------------------------------------------'
+     */
+    [_BL] = LAYOUT_60_ansi(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, MO(_FL), KC_RCTL
+    ),
 
-  /* Keymap _FL: Function Layer
-   */
-[_FL] = KEYMAP_ANSI(
-  KC_GRV, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET,  \
-  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, BL_INC,BL_TOGG, \
-  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
-  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
-  _______,_______,_______,                _______,                        _______,_______,_______,_______),
+    /* Keymap _FL: Function Layer
+     */
+    [_FL] = LAYOUT_60_ansi(
+        KC_GRV,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_DEC,  BL_INC,  BL_TOGG,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    )
 };
-
diff --git a/keyboards/jm60/keymaps/poker3/keymap.c b/keyboards/jm60/keymaps/poker3/keymap.c
index 07f432dcd8..72e64bbcc5 100644
--- a/keyboards/jm60/keymaps/poker3/keymap.c
+++ b/keyboards/jm60/keymaps/poker3/keymap.c
@@ -1,31 +1,24 @@
 #include QMK_KEYBOARD_H
 
-// Used for SHIFT_ESC
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _BL 0
-#define _FL 1
+enum layer_names {
+    _BL,
+    _FL
+};
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Keymap _BL: (Base Layer) Default Layer
-   */
-[_BL] = KEYMAP_ANSI(
-  KC_GESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC, \
-  KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSLS, \
-  MO(_FL), KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,         KC_ENT,  \
-  KC_LSFT,         KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,         KC_RSFT, \
-  KC_LCTL, KC_LGUI,KC_LALT,                KC_SPC,                                 KC_RALT,KC_RGUI, MO(_FL),KC_RCTL),
+    [_BL] = LAYOUT_60_ansi(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        MO(_FL), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                      KC_RALT, KC_RGUI, MO(_FL), KC_RCTL
+    ),
 
-  /* Keymap _FL: Function Layer
-   */
-[_FL] = KEYMAP_ANSI(
-  KC_GRV, KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DEL,  \
-  _______,KC_MPRV,KC_MPLY,KC_MNXT,_______,_______,_______,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR, KC_SLCK, KC_PAUS,_______, \
-  KC_CAPS,_______,KC_VOLD,KC_VOLU,KC_MUTE,_______,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,KC_DEL,_______, \
-  _______,KC_APP,_______,_______,_______,_______,KC_END,_______,_______,_______,_______,_______, \
-  _______,_______,_______,                _______,                        _______,_______,_______,_______),
+    [_FL] = LAYOUT_60_ansi(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, KC_PGUP, KC_UP,   KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, _______,
+        KC_CAPS, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS,  KC_DEL,           _______,
+        _______,          KC_APP,  _______, _______, _______, _______, KC_END,  _______, _______, _______, _______,          _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    )
 };
diff --git a/keyboards/jm60/led.c b/keyboards/jm60/led.c
deleted file mode 100644
index 4ce0b3e269..0000000000
--- a/keyboards/jm60/led.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <hal.h>
-
-#include "led.h"
-
-
-void led_set(uint8_t usb_led) {
-}
diff --git a/keyboards/jm60/matrix.c b/keyboards/jm60/matrix.c
deleted file mode 100644
index e19d4f02b1..0000000000
--- a/keyboards/jm60/matrix.c
+++ /dev/null
@@ -1,128 +0,0 @@
-#include <stdint.h>
-#include <stdbool.h>
-#include <string.h>
-#include <hal.h>
-#include "timer.h"
-#include "wait.h"
-#include "print.h"
-#include "matrix.h"
-
-
-/*
- * JM60
- * Column pins are input with internal pull-down. Row pins are output and strobe with high.
- * Key is high or 1 when it turns on.
- *
- *     col: { PTA15, PTC10, PTC11, PTC12, PTD2, PTB3, PTB4, PTB5, PTB6, PTB7, PTB8, PTB9, PTA2, PTA3 }
- *     row: { PTB11, PTB10, PTB2, PTB1, PTB0}
- */
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-static bool debouncing = false;
-static uint16_t debouncing_time = 0;
-
-
-void matrix_init(void)
-{
-//debug_matrix = true;
-    /* Column(sense) */
-    palSetPadMode(GPIOA, 15,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOC, 10,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOC, 11,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOC, 12,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOD, 2,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOB, 3,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOB, 4,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOB, 5,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOB, 6,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOB, 7,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOB, 8,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOB, 9,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOA, 2,  PAL_MODE_INPUT_PULLDOWN);
-    palSetPadMode(GPIOA, 3,  PAL_MODE_INPUT_PULLDOWN);
-
-    /* Row(strobe) */
-    palSetPadMode(GPIOB, 11,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOB, 10,  PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPadMode(GPIOB, 0,  PAL_MODE_OUTPUT_PUSHPULL);
-
-    memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
-    memset(matrix_debouncing, 0, MATRIX_ROWS * sizeof(matrix_row_t));
-}
-
-uint8_t matrix_scan(void)
-{
-    for (int row = 0; row < MATRIX_ROWS; row++) {
-        matrix_row_t data = 0;
-
-        // strobe row
-        switch (row) {
-            case 0: palSetPad(GPIOB, 11);    break;
-            case 1: palSetPad(GPIOB, 10);    break;
-            case 2: palSetPad(GPIOB, 2);   	break;
-            case 3: palSetPad(GPIOB, 1);   break;
-            case 4: palSetPad(GPIOB, 0);    break;
-        }
-
-        wait_us(20); // need wait to settle pin state
-
-        // read col data: { PTA15, PTC10, PTC11, PTC12, PTD2, PTB3, PTB4, PTB5, PTB6, PTB7, PTB8, PTB9, PTA2, PTA3 }
-        data = ((palReadPort(GPIOA) & 0x8000UL) >> 15) |	// 0
-        	   ((palReadPort(GPIOC) & 0x1C00UL) >> 9) |		// 1, 2, 3
-			   ((palReadPort(GPIOD) & 0x0004UL) << 2) |		// 4
-			   ((palReadPort(GPIOB) & 0x03F8UL) << 2) |		// 5, 6, 7, 8, 9, 10, 11
-			   ((palReadPort(GPIOA) & 0x000CUL) << 10);    // 12, 13
-
-        // un-strobe row
-        switch (row) {
-        	case 0: palClearPad(GPIOB, 11);    break;
-        	case 1: palClearPad(GPIOB, 10);    break;
-        	case 2: palClearPad(GPIOB, 2);	  break;
-        	case 3: palClearPad(GPIOB, 1);   break;
-        	case 4: palClearPad(GPIOB, 0);    break;
-        }
-
-        if (matrix_debouncing[row] != data) {
-            matrix_debouncing[row] = data;
-            debouncing = true;
-            debouncing_time = timer_read();
-        }
-    }
-
-    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
-        for (int row = 0; row < MATRIX_ROWS; row++) {
-            matrix[row] = matrix_debouncing[row];
-        }
-        debouncing = false;
-    }
-    return 1;
-}
-
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & (1<<col));
-}
-
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    xprintf("\nr/c 01234567\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        xprintf("%X0: ", row);
-        matrix_row_t data = matrix_get_row(row);
-        for (int col = 0; col < MATRIX_COLS; col++) {
-            if (data & (1<<col))
-                xprintf("1");
-            else
-                xprintf("0");
-        }
-        xprintf("\n");
-    }
-}
diff --git a/keyboards/jm60/readme.md b/keyboards/jm60/readme.md
index 51473fc090..bb790d6d07 100644
--- a/keyboards/jm60/readme.md
+++ b/keyboards/jm60/readme.md
@@ -1,27 +1,21 @@
-JM60
-========
+# JM60
 
 A compact 60% keyboard with full RGB led support.
 
-Keyboard Maintainer: QMK Community  
-Hardware Supported: JM60  
-Hardware Availability: https://kbdfans.myshopify.com/ (is no longer sold)
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: JM60
+* Hardware Availability: https://kbdfans.myshopify.com/ (is no longer sold)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make jm60:default:bin
+    make jm60:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
 ## Flashing Instructions
 
-1) from the `qmk_firmware` directory run:
-```
-$ make jm60:default:bin
-```
+1) rename 'jm60_default.bin' to 'jm60_default.firmware'
 
-2) rename 'jm60_default.bin' to 'jm60_default.firmware'
+2) Press 'R' and reconnect the keyboard.
 
-3) Press 'R' and reconnect the keyboard.
-
-4) Start the original Configuration Tool and flash 'jm60_default.bin'
+3) Start the original Configuration Tool and flash 'jm60_default.bin'
diff --git a/keyboards/jm60/rules.mk b/keyboards/jm60/rules.mk
index 2a2a080b7f..5992cc0559 100644
--- a/keyboards/jm60/rules.mk
+++ b/keyboards/jm60/rules.mk
@@ -5,22 +5,23 @@ MCU_LDSCRIPT = jm60_bootloader
 BOARD = JM60_BOARD
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = no	# Console for debug
-COMMAND_ENABLE = no    # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	    # USB Nkey Rollover
-CUSTOM_MATRIX = yes # Custom matrix file
-BACKLIGHT_ENABLE = no
-VISUALIZER_ENABLE = no
+BOOTMAGIC_ENABLE = full     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
 
-# project specific files
-SRC = matrix.c \
-      led.c
+LAYOUTS = 60_ansi