Keymaps for several of my boards (#1641)

* copied mjt keymaps from archive

* All mjt boards now compile

* fixed jd45-mjt breathing

* Updates to fix SpaceFN but not tested yet.

* Still missing either spacebar or an adjacent keypress.

* Debugging rigged up for use with hid_listen.

* Reverted the default keymap to use tap_layer_key rather than custom.  Moved custom approach to keymap_debug.c

* Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function.

* Cleaned up JD45 keymap that uses tapkey.

* Redid minivan keymap with numsym rather than raise/lower.
Untested.

* Created my MJT keymap for HHKB
Enabled dynamic macros and moved
somoe of the shortcuts around.

* Minor keymap fixes to make them compile without errors.

* Added home/end to right arrow cluster on DYN layer.

* Added more keys to fn and dyn layers.

* It wasn't using my custom layer last time somehow...?  Now it will.

* Compiled and installed at end of day on 8/23

* Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback.

* Fixed volume controls... were reversed and disabled.

* Added F13-F15 back to fkeys layer in Minivan

* Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan.

* Removed DYN layer.

* Fixed diagram in planck numsym.

* Cleanup for pull request.

* Roadkit flip phone warning.

* Replaced PLAY_NOTES_ARRAY to PLAY_SONG

* reset the submodules

* checked out specific commits for submodules

* Removed debugging from JD45 shared config.h

* Moved custom rules.mk to apropriate keymap

Reset the shared rules.mk file.

* Trailing return issue in rules.mk

Gotta make for a smooth pull request :-)

4 files changed, 279 insertions, 0 deletions

diff --git a/keyboards/jd45/keymaps/mjt6u/Makefile b/keyboards/jd45/keymaps/mjt6u/Makefile
new file mode 100644
index 0000000000..f9cec3b84a
--- /dev/null
+++ b/keyboards/jd45/keymaps/mjt6u/Makefile
@@ -0,0 +1,23 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+DEBUG_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/jd45/keymaps/mjt6u/config.h b/keyboards/jd45/keymaps/mjt6u/config.h
new file mode 100644
index 0000000000..bf9dc6df3b
--- /dev/null
+++ b/keyboards/jd45/keymaps/mjt6u/config.h
@@ -0,0 +1,84 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    geekhack
+#define PRODUCT         JD45
+#define DESCRIPTION     q.m.k. keyboard firmware for JD45
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+/* Planck PCB default pin-out */
+#define MATRIX_ROW_PINS { F0, F1, F5, B4 }
+#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2, B0 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B7
+
+#define USB_MAX_POWER_CONSUMPTION 50
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/jd45/keymaps/mjt6u/keymap.c b/keyboards/jd45/keymaps/mjt6u/keymap.c
new file mode 100644
index 0000000000..44f0c31db3
--- /dev/null
+++ b/keyboards/jd45/keymaps/mjt6u/keymap.c
@@ -0,0 +1,149 @@
+#include "jd45.h"
+
+enum jd45_layers
+{
+  _QWERTY,
+  _QWERTYNUMMODS,
+  _NUMSYM,
+  _FUNCTION,
+  _NUMPAD,
+  _FKEYNUMPAD,
+  _ADJUST
+};
+
+enum jd45_keycodes
+{
+  NUMSYM = SAFE_RANGE,
+  MACSLEEP,
+  USEFNMODS,
+  USENUMMODS,
+  DYNAMIC_MACRO_RANGE,
+};
+
+#include "dynamic_macro.h"
+
+#define LONGPRESS_DELAY 150
+#define LAYER_TOGGLE_DELAY 900
+
+#define _______ KC_TRNS
+#define __MOD__ KC_TRNS
+#define XXXXXXX KC_NO
+#define F_FNSPC F(0)
+#define F_NUMSPC F(1)
+#define F_FNTAB F(2)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = {
+  {F_FNTAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_MINS, KC_BSPC},
+   {CTL_T(KC_ESC),    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN,  LT(_ADJUST, KC_QUOT)},
+     {KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH, SFT_T(KC_ENT)},
+  { XXXXXXX, KC_LALT, KC_LGUI, XXXXXXX,  XXXXXXX,  XXXXXXX, F_FNSPC,  XXXXXXX, XXXXXXX, MO(_FUNCTION),  MO(_ADJUST) }
+},
+[_QWERTYNUMMODS] = {
+  {F_FNTAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_MINS, KC_BSPC},
+   {CTL_T(KC_ESC),    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN,  LT(_ADJUST, KC_QUOT)},
+     {KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH, SFT_T(KC_ENT)},
+  {XXXXXXX,  KC_LALT, KC_LGUI, XXXXXXX,  XXXXXXX,  XXXXXXX, F_NUMSPC,  XXXXXXX, XXXXXXX,  MO(_FKEYNUMPAD), MO(_ADJUST) }
+},
+[_NUMSYM] = {
+{KC_GRV,     KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,   KC_0, _______, KC_DEL},
+ {__MOD__, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______},
+  {_______, _______, _______, _______, _______, KC_SPC, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, _______},
+{XXXXXXX, __MOD__, __MOD__, XXXXXXX,  XXXXXXX,  XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__}
+},
+[_FUNCTION] = {
+{__MOD__,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11, KC_F12},
+{__MOD__, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, _______, _______},
+{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+{XXXXXXX, __MOD__, __MOD__, XXXXXXX,  XXXXXXX,  XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__ , __MOD__}
+},
+[_NUMPAD] = {
+{KC_GRV,  _______,   KC_UP, _______,   KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL, KC_PSCR, KC_LBRC, KC_RBRC},
+{_______, KC_LEFT, KC_DOWN, KC_RGHT,   KC_4,    KC_5,    KC_6,  KC_INS, KC_HOME, KC_PGUP, _______, _______},
+{_______, _______, _______, _______,   KC_1,    KC_2,    KC_3,  KC_DEL,  KC_END, KC_PGDN, _______, _______},
+{XXXXXXX, _______, _______, XXXXXXX,  XXXXXXX,  XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__}
+},
+[_FKEYNUMPAD] = {
+{_______, _______, KC_VOLU, _______,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, KC_PSCR, _______, _______},
+{_______, KC_MPRV, KC_VOLD, KC_MNXT,   KC_F4,   KC_F5,   KC_F6,    KC_J,    KC_K,    KC_L, KC_SCLN, _______},
+{_______, _______, _______, _______,   KC_F1,   KC_F2,   KC_F3, KC_MUTE, KC_MPRV, KC_MNXT, KC_MSTP, _______},
+{XXXXXXX, _______, _______, XXXXXXX,  XXXXXXX,  XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__ }
+},
+[_ADJUST] = {
+  {_______, RESET, _______, _______, _______, _______, _______, DYN_REC_START1, DYN_REC_START2, _______, KC_PSCR, _______, _______},
+  { _______,  _______, _______, _______, USEFNMODS, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, MACSLEEP, _______, _______},
+  {  _______, _______, _______, _______, _______, _______, USENUMMODS, _______, _______, _______, _______, _______},
+  {XXXXXXX, _______, _______,XXXXXXX,  XXXXXXX,  XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__}
+ }
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0] = ACTION_LAYER_TAP_KEY(_NUMSYM, KC_SPC),
+  [1] = ACTION_LAYER_TAP_KEY(_NUMPAD, KC_SPC),
+  [2] = ACTION_LAYER_TAP_KEY(_FUNCTION, KC_TAB),
+};
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+static bool singular_key = false;
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  uint16_t macro_kc = (keycode == MO(_ADJUST) ? DYN_REC_STOP : keycode);
+  if (!process_record_dynamic_macro(macro_kc, record)) {
+    return false;
+  }
+  println(" ");
+  print("process record");
+
+  switch (keycode) {
+  case MACSLEEP:
+    if (record->event.pressed) {
+      // ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER);
+      register_code(KC_RSFT);
+      register_code(KC_RCTL);
+      register_code(KC_POWER);
+      unregister_code(KC_POWER);
+      unregister_code(KC_RCTL);
+      unregister_code(KC_RSFT);
+    }
+    return false;
+    break;
+  case USEFNMODS:
+    if (record->event.pressed) {
+      persistent_default_layer_set(1UL<<_QWERTY);
+      #ifdef AUDIO_ENABLE
+        PLAY_NOTE_ARRAY(tone_fnpc, false, 0);
+      #endif
+      print("Space-FN");
+    }
+    return false;
+    break;
+  case USENUMMODS:
+    if (record->event.pressed) {
+      persistent_default_layer_set(1UL<<_QWERTYNUMMODS);
+      #ifdef AUDIO_ENABLE
+        PLAY_NOTE_ARRAY(tone_fnmac, false, 0);
+      #endif
+      print("Space-Numpad");
+    }
+    return false;
+    break;
+  default:
+      singular_key = false;
+    break;
+  }
+
+  return true;
+};
+
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+    // debug_enable = true;
+}
diff --git a/keyboards/jd45/keymaps/mjt6u/readme.md b/keyboards/jd45/keymaps/mjt6u/readme.md
new file mode 100644
index 0000000000..a43ddf5fca
--- /dev/null
+++ b/keyboards/jd45/keymaps/mjt6u/readme.md
@@ -0,0 +1,23 @@
+# Mike's JD45 with 6u Spacebar
+
+- Early draft of numsym that misses a lot of symbols
+- Numpad layer available for evaluation
+- Works with iPhone Camera Adapter
+- Dynamic macros
+
+## Layers
+
+Qwerty for letters and mods.
+
+Qwertymods layer switches some Modifiers around
+
+Numsym puts the number keys across the top row like a Planck. Arrows are on hjkl
+which makes the other NumSym dynamic from my other boards fall apart
+
+Function layer replaces the top row numbers with Fkeys.
+
+Numpad layer makes a number pad in the center.
+
+Fkeynumpad replaces the numpad numbers with Fkeys.
+
+Adjust layer has macros and configuration.