keymap example update and tweak to set_led_bit function

2 files changed, 9 insertions, 9 deletions

diff --git a/keyboards/infinity60/keymaps/jpetermans/keymap.c b/keyboards/infinity60/keymaps/jpetermans/keymap.c
index 8d19834b2f..cc4633b1b4 100644
--- a/keyboards/infinity60/keymaps/jpetermans/keymap.c
+++ b/keyboards/infinity60/keymaps/jpetermans/keymap.c
@@ -59,7 +59,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSPC,   \
         TT(_FNAV), KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_ENT,         \
         KC_LSFT,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,F(TILDE),KC_NO,          \
-        KC_LCTL,   KC_LGUI,KC_LALT,               KC_SPC,          KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL         \
+        KC_LCTL,   KC_LGUI,KC_LALT,            LT(_FNAV, KC_SPC),       KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL         \
     ),
 
     /* numpad */
@@ -68,7 +68,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______,_______,_______,_______,_______,_______,_______, KC_P4, KC_P5, KC_P6, KC_PAST, _______,_______,_______, \
         MO(_FNAV),_______,_______,_______,_______,_______,_______, KC_P1, KC_P2, KC_P3, KC_PMNS, _______,_______,      \
         _______,_______,_______,_______,_______,_______,_______, KC_P0,KC_COMM,KC_PDOT,KC_PPLS, _______,KC_NO,      \
-        _______,_______,_______,               MO(_BASE),           _______,_______,_______,_______   \
+        _______,_______,_______,               TO(_BASE),           _______,_______,_______,_______   \
     ),
 
     /* F-, arrow, and media keys */
@@ -290,7 +290,7 @@ void matrix_scan_user(void) {
         led_pin_byte = layer_state & 0xFF;
         msg=(7 << 8) | DISPLAY_PAGE;
         chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
-        msg=(1<<16) | (led_pin_byte << 8) | SET_FULL_ROW;
+        msg=(1 << 16) | (led_pin_byte << 8) | SET_FULL_ROW;
         chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
         break;
 
diff --git a/keyboards/infinity60/keymaps/jpetermans/readme.md b/keyboards/infinity60/keymaps/jpetermans/readme.md
index 63fd88ec22..b83057ea7b 100644
--- a/keyboards/infinity60/keymaps/jpetermans/readme.md
+++ b/keyboards/infinity60/keymaps/jpetermans/readme.md
@@ -16,9 +16,9 @@ digits mean "row" and "col", i.e. 45 means pin 4, column 5 in the IS31 datasheet
 ```
 *Unused in Alphabet Layout
 
-The IS31 includes 8 pages (or frames) 0-7 and each page consists of 144 bytes
+The IS31 includes 8 led pages (or frames) 0-7 than can be displayed, and each page consists of 144 bytes.
 - **bytes 0 - 17** - LED control (on/off).
-    * 18 pins which alternate between A and B matrices (CA1, CB1, CA2, CB2, ..).
+    * 18 pins which alternate between A and B matrices (A1, B1, A2, B2, ..).
     * Each byte controls the 8 leds on that pin with bits (8 to 1).
 - **bytes 8 - 35** - Blink control.
     * Same as LED control above, but sets blink on/off.
@@ -31,7 +31,7 @@ In the Infinity60 project folder, led_controller.c sets up ability to write led
 
 One function is available to directly set leds without the mailbox:
 ```
-write_led_page(page#, array of leds by address, # of leds in array)
+write_led_page(page#, array of leds by address, # of addresses in array)
 ```
 This function saves a full page to the controller using a supplied array of led locations such as:
 ```c
@@ -45,7 +45,7 @@ write_led_page(5, led_numpad, 16);
 ```
 
 Remaining led control is done through the led mailbox using these message types:
-- **SET_FULL_ROW** (3 bytes) - row#, message type, 8-bit mask. Sets all leds on one pin per the bit mask.
+- **SET_FULL_ROW** (3 bytes) - message type, 8-bit mask, and row#. Sets all leds on one pin per the bit mask.
 - **OFF_LED, ON_LED, TOGGLE_LED** (3 bytes) - message type, led address, and page#. Off/on/toggle specific led.
 - **BLINK_OFF_LED, BLINK_ON_LED, BLINK_OFF_LED** (3 bytes) - message type, led address, and page#. Set blink Off/on/toggle for specific led.
 - **TOGGLE_ALL** (1 byte) - Turn on/off full backlight.
@@ -68,7 +68,7 @@ chMBPost(&led_mailbox, message, timeout);
 An example:
 ```c
 //set the message to be sent. First byte (LSB) is the led address, and second is the message type
-msg=(42 << 8) | ON_LED
+msg=(42 << 8) | ON_LED;
 
 //send msg to the led mailbox
 chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
@@ -76,7 +76,7 @@ chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
 
 Another:
 ```c
-msg=(46 << 8) | BLINK_TOGGLE_LED
+msg=(46 << 8) | BLINK_TOGGLE_LED;
 chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
 ```