Keyboard: Pr/helixpico add layout kc (#4686)

* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL

* add define USB_MAX_POWER_CONSUMPTION

* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk

rules.mk: add 4 Variables for compile control.

   # Helix keyboard customize
   # you can edit follows 4 Variables
   #  jp: 以下の4つの変数を必要に応じて編集します。
   OLED_ENABLE = no            # OLED_ENABLE
   LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
   LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
   LED_ANIMATIONS = yes        # LED animations

config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define

* HELIX_ROWS define move from config.h to rules.mk

* add readme.md

* rename readme.md to readme_jp.md

* add readme.md and modify readme_jp.md

* change helix/ssd1306.c for select glcdfont.c position

* add variable LOCAL_GLCDFONT into each keymaps rules.mk

* Add iPhone/iPad LED support to Helix default keymap

* renumber _ADJUST for shrink program size

* Fix Helix i2c wrong bit rate

* add helix serial debug code

* serial debug macro move from config.h to serial.h

* helix serial.c debugging...

* refine debug macros

* add some comments

* add SELECT_SERIAL_SPEED

* add comments

* debugging sync_send/sync_recv

* add very high speed

* fix sync_send/sync_recv

* fix com. start and switch send/recv

* debug mode off

* remove debug codes

* temporary change, compiling C, C++ and ASM without -g

* helix config.h refine

* Revert "temporary change, compiling C, C++ and ASM without -g"

This reverts commit e9730cbbfd94fbcf792d992e3a1a65ad279b24d6.

* add change_reciver2sender()/change_sender2reciver()

This is a change to improve readability.

* txled, rxled off in matrix_init()

* add serial_send_packet() / serial_recive_packet()

This is a change to reduce object size.

* add serial_low() at ISR() top

* add __attribute__((always_inline)) to some functions

* modify serial_send_packet()/serial_recive_packet()

A little, object size reduction.
A little, speedup.

* add debug code to helix/serial.c

* Adjust sampling timing of serial signal being received

* add split_scomm.c/split_scomm.h and change serial.c/serial.h

serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.

* add split_scomm.c/split_scomm.h into helix/rev1

* reduce object size helix/rev2/matrix.c

* remove checksum check, add parity check

* force occur parity error for test

* parity test ok. remove test code

* change some comment & add skip code when buffer_size == 0

* serial.c: multiple types of transaction support

Add 4 bits transaction-type field at packet top.
Select Transaction Descriptor Table entry by transaction-type.

* helix serial master-slave transaction optimize

Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized.

* add debug code for retry

* add comment into each config.h

* fix ISR status drop

* add a debug macro 'debug_retry_chg()'

* reduce led_test size

* remove debug code from helix/serial.c and etc.

* helix:five_rows change TAPPING_TERM value 140

* Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement.

- The difference with the original let's split's serial.c
  - It's high-speed about 4 times.
  - Stable bi-directional data transfer. (Helix need master to slave transfer)
  - serial.h was divided 2 files, serial_config.h and sereial.h
  - With multiple types of transaction support, communication contents can be optimized. (NEW flexible API)

- USE OLD Simple APIs (compatible with let's split serial.c)
  - files :
    - serial_config.h -- hardware configuration (need include by config.h)
    - serial.c/serial.h -- serial communication

- USE NEW flexible APIs. (Support multi-type transaction function.)
  serial.c was divided into 2 layers, split_scom.c and serial.c.
  The upper layer split_scomm.c is called from matrix.c.
  The lower layer serial.c accesses the hardware.
  - files
    - split_scomm.c -- communication buffer is defined in here. call by matrix.c.
    - split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c
    - serial_config.h -- hardware configuration (need include by config.h)
      To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION
    - serial.c/serial.h -- serial communication lower layer

- NEW APIs for serial.c / serial.h (The lower layer)
  // Soft Serial Transaction Descriptor
  typedef struct _SSTD_t  {
      uint8_t *status;
      uint8_t initiator2target_buffer_size;
      uint8_t *initiator2target_buffer;
      uint8_t target2initiator_buffer_size;
      uint8_t *target2initiator_buffer;
  } SSTD_t;

  // initiator is transaction start side
  void soft_serial_initiator_init(SSTD_t *sstd_table);
  // target is interrupt accept side
  void soft_serial_target_init(SSTD_t *sstd_table);
  int soft_serial_transaction(int sstd_index);
  int soft_serial_get_and_clean_target_status(int sstd_index);

- NEW APIs for split_scomm.c / split_scomm.h (The upper layer)
   move from old serial.c the following buffer and functions
     serial_slave_buffer[]
     serial_master_buffer[]
     void serial_master_init(void)
     void serial_slave_init(void)
     int serial_update_buffers(void)
   define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h

* fix comment typo

* Fix the value of helix:five_rows variable HELIX_ROWS to 5.

* led_test rules.mk some change

* Separate common parts of helix/rev2/keymaps/*/rules.mk into helix/rev2/keymaps_common.mk

* helix/rev2/keymaps/edvorakjp/rules.mk use helix/rev2/keymaps_common.mk

* Separate common parts of helix/pico/keymaps/*/rules.mk into helix/pico/keymaps_common.mk

* Helix each keymap's using rgblight mode symbol instead magic number

No change in build result.

* Helix pico keymaps: make rgblight modes selectable.

No change in build result.

* Helix rev2 keymaps: make rgblight modes selectable.

No change in build result.

* fixed Helix froggy/keymap.c: invalid rgblight mode value 0 to 1 (=RGBLIGHT_MODE_STATIC_LIGHT)

* Deselect RGB_TEST and ALTERNATING in Helix rev2,pico keymaps config.h.

* Merge branch 'master' of https://github.com/qmk/qmk_firmware

* revert 955dcbc

* delete keymaps_common.mk

* add LAYOUT_kc() to keyboards/helix/pico/pico.h

1 files changed, 14 insertions, 0 deletions

diff --git a/keyboards/helix/pico/pico.h b/keyboards/helix/pico/pico.h
index a3d658daa0..153132775b 100644
--- a/keyboards/helix/pico/pico.h
+++ b/keyboards/helix/pico/pico.h
@@ -62,4 +62,18 @@
 	}
 #endif
 
+#define LAYOUT_kc(                                                      \
+    L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
+    L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \
+    L20, L21, L22, L23, L24, L25,           R20, R21, R22, R23, R24, R25, \
+    L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35 \
+    ) \
+    LAYOUT( \
+      KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
+      KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
+      KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
+      KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
+    )
+
+
 #endif