2020 February 29 Breaking Changes Update (#8064)

3 files changed, 426 insertions, 79 deletions

diff --git a/keyboards/hadron/ver3/chconf.h b/keyboards/hadron/ver3/chconf.h
index ce44925f3c..c8dbb85a84 100644
--- a/keyboards/hadron/ver3/chconf.h
+++ b/keyboards/hadron/ver3/chconf.h
@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -15,7 +15,7 @@
 */
 
 /**
- * @file    templates/chconf.h
+ * @file    rt/templates/chconf.h
  * @brief   Configuration file template.
  * @details A copy of this file must be placed in each project directory, it
  *          contains the application specific kernel settings.
@@ -29,6 +29,7 @@
 #define CHCONF_H
 
 #define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
 
 /*===========================================================================*/
 /**
@@ -41,14 +42,34 @@
  * @brief   System time counter resolution.
  * @note    Allowed values are 16 or 32 bits.
  */
+#if !defined(CH_CFG_ST_RESOLUTION)
 #define CH_CFG_ST_RESOLUTION                32
+#endif
 
 /**
  * @brief   System tick frequency.
  * @details Frequency of the system timer that drives the system ticks. This
  *          setting also defines the system tick time unit.
  */
+#if !defined(CH_CFG_ST_FREQUENCY)
 #define CH_CFG_ST_FREQUENCY                 1000
+#endif
+
+/**
+ * @brief   Time intervals data size.
+ * @note    Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE               32
+#endif
+
+/**
+ * @brief   Time types data size.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE              32
+#endif
 
 /**
  * @brief   Time delta constant for the tick-less mode.
@@ -58,7 +79,9 @@
  *          The value one is not valid, timeouts are rounded up to
  *          this value.
  */
+#if !defined(CH_CFG_ST_TIMEDELTA)
 #define CH_CFG_ST_TIMEDELTA                 0
+#endif
 
 /** @} */
 
@@ -81,7 +104,9 @@
  * @note    The round robin preemption is not supported in tickless mode and
  *          must be set to zero in that case.
  */
+#if !defined(CH_CFG_TIME_QUANTUM)
 #define CH_CFG_TIME_QUANTUM                 0
+#endif
 
 /**
  * @brief   Managed RAM size.
@@ -94,7 +119,9 @@
  *          provide the @p __heap_base__ and @p __heap_end__ symbols.
  * @note    Requires @p CH_CFG_USE_MEMCORE.
  */
+#if !defined(CH_CFG_MEMCORE_SIZE)
 #define CH_CFG_MEMCORE_SIZE                 0
+#endif
 
 /**
  * @brief   Idle thread automatic spawn suppression.
@@ -103,7 +130,9 @@
  *          function becomes the idle thread and must implement an
  *          infinite loop.
  */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
 #define CH_CFG_NO_IDLE_THREAD               FALSE
+#endif
 
 /** @} */
 
@@ -122,7 +151,9 @@
  * @note    This is not related to the compiler optimization options.
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
 #define CH_CFG_OPTIMIZE_SPEED               TRUE
+#endif
 
 /** @} */
 
@@ -140,7 +171,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_TM)
 #define CH_CFG_USE_TM                       TRUE
+#endif
 
 /**
  * @brief   Threads registry APIs.
@@ -148,7 +181,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_REGISTRY)
 #define CH_CFG_USE_REGISTRY                 TRUE
+#endif
 
 /**
  * @brief   Threads synchronization APIs.
@@ -157,7 +192,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_WAITEXIT)
 #define CH_CFG_USE_WAITEXIT                 TRUE
+#endif
 
 /**
  * @brief   Semaphores APIs.
@@ -165,7 +202,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_SEMAPHORES)
 #define CH_CFG_USE_SEMAPHORES               TRUE
+#endif
 
 /**
  * @brief   Semaphores queuing mode.
@@ -176,7 +215,9 @@
  *          requirements.
  * @note    Requires @p CH_CFG_USE_SEMAPHORES.
  */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
 #define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+#endif
 
 /**
  * @brief   Mutexes APIs.
@@ -184,7 +225,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_MUTEXES)
 #define CH_CFG_USE_MUTEXES                  TRUE
+#endif
 
 /**
  * @brief   Enables recursive behavior on mutexes.
@@ -194,7 +237,9 @@
  * @note    The default is @p FALSE.
  * @note    Requires @p CH_CFG_USE_MUTEXES.
  */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
 #define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+#endif
 
 /**
  * @brief   Conditional Variables APIs.
@@ -204,7 +249,9 @@
  * @note    The default is @p TRUE.
  * @note    Requires @p CH_CFG_USE_MUTEXES.
  */
+#if !defined(CH_CFG_USE_CONDVARS)
 #define CH_CFG_USE_CONDVARS                 TRUE
+#endif
 
 /**
  * @brief   Conditional Variables APIs with timeout.
@@ -214,7 +261,9 @@
  * @note    The default is @p TRUE.
  * @note    Requires @p CH_CFG_USE_CONDVARS.
  */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
 #define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+#endif
 
 /**
  * @brief   Events Flags APIs.
@@ -222,7 +271,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_EVENTS)
 #define CH_CFG_USE_EVENTS                   TRUE
+#endif
 
 /**
  * @brief   Events Flags APIs with timeout.
@@ -232,7 +283,9 @@
  * @note    The default is @p TRUE.
  * @note    Requires @p CH_CFG_USE_EVENTS.
  */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
 #define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+#endif
 
 /**
  * @brief   Synchronous Messages APIs.
@@ -241,7 +294,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_MESSAGES)
 #define CH_CFG_USE_MESSAGES                 TRUE
+#endif
 
 /**
  * @brief   Synchronous Messages queuing mode.
@@ -252,7 +307,9 @@
  *          requirements.
  * @note    Requires @p CH_CFG_USE_MESSAGES.
  */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
 #define CH_CFG_USE_MESSAGES_PRIORITY        TRUE
+#endif
 
 /**
  * @brief   Mailboxes APIs.
@@ -262,7 +319,9 @@
  * @note    The default is @p TRUE.
  * @note    Requires @p CH_CFG_USE_SEMAPHORES.
  */
+#if !defined(CH_CFG_USE_MAILBOXES)
 #define CH_CFG_USE_MAILBOXES                TRUE
+#endif
 
 /**
  * @brief   Core Memory Manager APIs.
@@ -271,7 +330,9 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_MEMCORE)
 #define CH_CFG_USE_MEMCORE                  TRUE
+#endif
 
 /**
  * @brief   Heap Allocator APIs.
@@ -283,7 +344,9 @@
  *          @p CH_CFG_USE_SEMAPHORES.
  * @note    Mutexes are recommended.
  */
+#if !defined(CH_CFG_USE_HEAP)
 #define CH_CFG_USE_HEAP                     TRUE
+#endif
 
 /**
  * @brief   Memory Pools Allocator APIs.
@@ -292,7 +355,31 @@
  *
  * @note    The default is @p TRUE.
  */
+#if !defined(CH_CFG_USE_MEMPOOLS)
 #define CH_CFG_USE_MEMPOOLS                 TRUE
+#endif
+
+/**
+ * @brief   Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS                TRUE
+#endif
+
+/**
+ * @brief   Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES                    TRUE
+#endif
 
 /**
  * @brief   Dynamic Threads APIs.
@@ -303,7 +390,80 @@
  * @note    Requires @p CH_CFG_USE_WAITEXIT.
  * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
  */
+#if !defined(CH_CFG_USE_DYNAMIC)
 #define CH_CFG_USE_DYNAMIC                  TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ *          kernel.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY                  TRUE
+#endif
+
+/**
+ * @brief   Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ *          pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
+#endif
+
+/**
+ * @brief   Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY     TRUE
+#endif
+
+/**
+ * @brief   Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS      TRUE
+#endif
+
+/**
+ * @brief   Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES           TRUE
+#endif
+
+/**
+ * @brief   Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES            TRUE
+#endif
+
+/**
+ * @brief   Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS            TRUE
+#endif
+
+/**
+ * @brief   Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES                TRUE
+#endif
 
 /** @} */
 
@@ -319,7 +479,9 @@
  *
  * @note    The default is @p FALSE.
  */
+#if !defined(CH_DBG_STATISTICS)
 #define CH_DBG_STATISTICS                   FALSE
+#endif
 
 /**
  * @brief   Debug option, system state check.
@@ -328,7 +490,9 @@
  *
  * @note    The default is @p FALSE.
  */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
 #define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+#endif
 
 /**
  * @brief   Debug option, parameters checks.
@@ -337,7 +501,9 @@
  *
  * @note    The default is @p FALSE.
  */
+#if !defined(CH_DBG_ENABLE_CHECKS)
 #define CH_DBG_ENABLE_CHECKS                FALSE
+#endif
 
 /**
  * @brief   Debug option, consistency checks.
@@ -347,7 +513,9 @@
  *
  * @note    The default is @p FALSE.
  */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
 #define CH_DBG_ENABLE_ASSERTS               FALSE
+#endif
 
 /**
  * @brief   Debug option, trace buffer.
@@ -355,14 +523,18 @@
  *
  * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
  */
+#if !defined(CH_DBG_TRACE_MASK)
 #define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+#endif
 
 /**
  * @brief   Trace buffer entries.
  * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
  *          different from @p CH_DBG_TRACE_MASK_DISABLED.
  */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
 #define CH_DBG_TRACE_BUFFER_SIZE            128
+#endif
 
 /**
  * @brief   Debug option, stack checks.
@@ -374,7 +546,9 @@
  * @note    The default failure mode is to halt the system with the global
  *          @p panic_msg variable set to @p NULL.
  */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
 #define CH_DBG_ENABLE_STACK_CHECK           TRUE
+#endif
 
 /**
  * @brief   Debug option, stacks initialization.
@@ -384,7 +558,9 @@
  *
  * @note    The default is @p FALSE.
  */
+#if !defined(CH_DBG_FILL_THREADS)
 #define CH_DBG_FILL_THREADS                 FALSE
+#endif
 
 /**
  * @brief   Debug option, threads profiling.
@@ -395,7 +571,9 @@
  * @note    This debug option is not currently compatible with the
  *          tickless mode.
  */
+#if !defined(CH_DBG_THREADS_PROFILING)
 #define CH_DBG_THREADS_PROFILING            FALSE
+#endif
 
 /** @} */
 
@@ -407,6 +585,22 @@
 /*===========================================================================*/
 
 /**
+ * @brief   System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ *          just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
  * @brief   Threads descriptor structure extension.
  * @details User fields added to the end of the @p thread_t structure.
  */
@@ -415,9 +609,9 @@
 
 /**
  * @brief   Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
  *
- * @note    It is invoked from within @p chThdInit() and implicitly from all
+ * @note    It is invoked from within @p _thread_init() and implicitly from all
  *          the threads creation APIs.
  */
 #define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
diff --git a/keyboards/hadron/ver3/halconf.h b/keyboards/hadron/ver3/halconf.h
index a14ace02b4..b916cd13e3 100644
--- a/keyboards/hadron/ver3/halconf.h
+++ b/keyboards/hadron/ver3/halconf.h
@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -28,153 +28,190 @@
 #ifndef HALCONF_H
 #define HALCONF_H
 
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_0_
+
 #include "mcuconf.h"
 
 /**
  * @brief   Enables the PAL subsystem.
  */
 #if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                 TRUE
+#define HAL_USE_PAL                         TRUE
 #endif
 
 /**
  * @brief   Enables the ADC subsystem.
  */
 #if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                 FALSE
+#define HAL_USE_ADC                         FALSE
 #endif
 
 /**
  * @brief   Enables the CAN subsystem.
  */
 #if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                 FALSE
+#define HAL_USE_CAN                         FALSE
 #endif
 
 /**
- * @brief   Enables the DAC subsystem.
+ * @brief   Enables the cryptographic subsystem.
  */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                 TRUE
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY                         FALSE
 #endif
 
 /**
- * @brief   Enables the EXT subsystem.
+ * @brief   Enables the DAC subsystem.
  */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT                 FALSE
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                         TRUE
 #endif
 
 /**
  * @brief   Enables the GPT subsystem.
  */
 #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                 TRUE
+#define HAL_USE_GPT                         TRUE
 #endif
 
 /**
  * @brief   Enables the I2C subsystem.
  */
 #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 TRUE
+#define HAL_USE_I2C                         TRUE
 #endif
 
 /**
  * @brief   Enables the I2S subsystem.
  */
 #if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                 FALSE
+#define HAL_USE_I2S                         FALSE
 #endif
 
 /**
  * @brief   Enables the ICU subsystem.
  */
 #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                 FALSE
+#define HAL_USE_ICU                         FALSE
 #endif
 
 /**
  * @brief   Enables the MAC subsystem.
  */
 #if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                 FALSE
+#define HAL_USE_MAC                         FALSE
 #endif
 
 /**
  * @brief   Enables the MMC_SPI subsystem.
  */
 #if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI             FALSE
+#define HAL_USE_MMC_SPI                     FALSE
 #endif
 
 /**
  * @brief   Enables the PWM subsystem.
  */
 #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 TRUE
-#endif
-
-/**
- * @brief   Enables the QSPI subsystem.
- */
-#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
-#define HAL_USE_QSPI                FALSE
+#define HAL_USE_PWM                         TRUE
 #endif
 
 /**
  * @brief   Enables the RTC subsystem.
  */
 #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                 FALSE
+#define HAL_USE_RTC                         FALSE
 #endif
 
 /**
  * @brief   Enables the SDC subsystem.
  */
 #if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                 FALSE
+#define HAL_USE_SDC                         FALSE
 #endif
 
 /**
  * @brief   Enables the SERIAL subsystem.
  */
 #if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL              FALSE
+#define HAL_USE_SERIAL                      FALSE
 #endif
 
 /**
  * @brief   Enables the SERIAL over USB subsystem.
  */
 #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          TRUE
+#define HAL_USE_SERIAL_USB                  TRUE
+#endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO                         FALSE
 #endif
 
 /**
  * @brief   Enables the SPI subsystem.
  */
 #if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                 FALSE
+#define HAL_USE_SPI                         FALSE
+#endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG                        FALSE
 #endif
 
 /**
  * @brief   Enables the UART subsystem.
  */
 #if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                FALSE
+#define HAL_USE_UART                        FALSE
 #endif
 
 /**
  * @brief   Enables the USB subsystem.
  */
 #if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                 TRUE
+#define HAL_USE_USB                         TRUE
 #endif
 
 /**
  * @brief   Enables the WDG subsystem.
  */
 #if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                 FALSE
+#define HAL_USE_WDG                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI                        FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS                   FALSE
+#endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT                        FALSE
 #endif
 
 /*===========================================================================*/
@@ -186,7 +223,7 @@
  * @note    Disabling this option saves both code and data space.
  */
 #if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                TRUE
+#define ADC_USE_WAIT                        TRUE
 #endif
 
 /**
@@ -194,7 +231,7 @@
  * @note    Disabling this option saves both code and data space.
  */
 #if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#define ADC_USE_MUTUAL_EXCLUSION            TRUE
 #endif
 
 /*===========================================================================*/
@@ -205,7 +242,56 @@
  * @brief   Sleep mode related APIs inclusion switch.
  */
 #if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE          TRUE
+#define CAN_USE_SLEEP_MODE                  TRUE
+#endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS           FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK                FALSE
+#endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK            FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION            TRUE
 #endif
 
 /*===========================================================================*/
@@ -216,7 +302,7 @@
  * @brief   Enables the mutual exclusion APIs on the I2C bus.
  */
 #if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#define I2C_USE_MUTUAL_EXCLUSION            TRUE
 #endif
 
 /*===========================================================================*/
@@ -224,17 +310,17 @@
 /*===========================================================================*/
 
 /**
- * @brief   Enables an event sources for incoming packets.
+ * @brief   Enables the zero-copy API.
  */
 #if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY           FALSE
+#define MAC_USE_ZERO_COPY                   FALSE
 #endif
 
 /**
  * @brief   Enables an event sources for incoming packets.
  */
 #if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS              TRUE
+#define MAC_USE_EVENTS                      TRUE
 #endif
 
 /*===========================================================================*/
@@ -250,7 +336,7 @@
  *          use a DMA channel and heavily loads the CPU.
  */
 #if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING            TRUE
+#define MMC_NICE_WAITING                    TRUE
 #endif
 
 /*===========================================================================*/
@@ -262,7 +348,7 @@
  * @note    Attempts are performed at 10mS intervals.
  */
 #if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY              100
+#define SDC_INIT_RETRY                      100
 #endif
 
 /**
@@ -271,7 +357,7 @@
  *          at @p FALSE.
  */
 #if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT             FALSE
+#define SDC_MMC_SUPPORT                     FALSE
 #endif
 
 /**
@@ -281,7 +367,21 @@
  *          lower priority, this may slow down the driver a bit however.
  */
 #if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING            TRUE
+#define SDC_NICE_WAITING                    TRUE
+#endif
+
+/**
+ * @brief   OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20                    0x50FF8000U
+#endif
+
+/**
+ * @brief   OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR                        0x80100000U
 #endif
 
 /*===========================================================================*/
@@ -294,7 +394,7 @@
  *          default configuration.
  */
 #if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE      38400
+#define SERIAL_DEFAULT_BITRATE              38400
 #endif
 
 /**
@@ -305,7 +405,7 @@
  *          buffers.
  */
 #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE         16
+#define SERIAL_BUFFERS_SIZE                 16
 #endif
 
 /*===========================================================================*/
@@ -320,7 +420,7 @@
  *          buffers.
  */
 #if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE     1
+#define SERIAL_USB_BUFFERS_SIZE             1
 #endif
 
 /**
@@ -328,7 +428,7 @@
  * @note    The default is 2 buffers.
  */
 #if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER   2
+#define SERIAL_USB_BUFFERS_NUMBER           2
 #endif
 
 /*===========================================================================*/
@@ -340,15 +440,32 @@
  * @note    Disabling this option saves both code and data space.
  */
 #if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                TRUE
+#define SPI_USE_WAIT                        TRUE
 #endif
 
 /**
+ * @brief   Enables circular transfers APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR                    FALSE
+#endif
+
+
+/**
  * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
  * @note    Disabling this option saves both code and data space.
  */
 #if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#define SPI_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/**
+ * @brief   Handling method for SPI CS line.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
 #endif
 
 /*===========================================================================*/
@@ -360,7 +477,7 @@
  * @note    Disabling this option saves both code and data space.
  */
 #if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT               FALSE
+#define UART_USE_WAIT                       FALSE
 #endif
 
 /**
@@ -368,7 +485,7 @@
  * @note    Disabling this option saves both code and data space.
  */
 #if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#define UART_USE_MUTUAL_EXCLUSION           FALSE
 #endif
 
 /*===========================================================================*/
@@ -380,7 +497,27 @@
  * @note    Disabling this option saves both code and data space.
  */
 #if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                TRUE
+#define USB_USE_WAIT                        TRUE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT                       TRUE
+#endif
+
+/**
+ * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
 #endif
 
 #endif /* HALCONF_H */
diff --git a/keyboards/hadron/ver3/mcuconf.h b/keyboards/hadron/ver3/mcuconf.h
index 94d761cfba..0307251ec3 100644
--- a/keyboards/hadron/ver3/mcuconf.h
+++ b/keyboards/hadron/ver3/mcuconf.h
@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -32,6 +32,7 @@
  */
 
 #define STM32F3xx_MCUCONF
+#define STM32F303_MCUCONF
 
 /*
  * HAL driver system settings.
@@ -66,9 +67,28 @@
 #define STM32_USB_CLOCK_REQUIRED            TRUE
 #define STM32_USBPRE                        STM32_USBPRE_DIV1P5
 
-#undef STM32_HSE_BYPASS
-// #error "oh no"
-// #endif
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY            6
+#define STM32_IRQ_EXTI1_PRIORITY            6
+#define STM32_IRQ_EXTI2_PRIORITY            6
+#define STM32_IRQ_EXTI3_PRIORITY            6
+#define STM32_IRQ_EXTI4_PRIORITY            6
+#define STM32_IRQ_EXTI5_9_PRIORITY          6
+#define STM32_IRQ_EXTI10_15_PRIORITY        6
+#define STM32_IRQ_EXTI16_PRIORITY           6
+#define STM32_IRQ_EXTI17_PRIORITY           15
+#define STM32_IRQ_EXTI18_PRIORITY           6
+#define STM32_IRQ_EXTI19_PRIORITY           15
+#define STM32_IRQ_EXTI20_PRIORITY           15
+#define STM32_IRQ_EXTI21_22_29_PRIORITY     6
+#define STM32_IRQ_EXTI30_32_PRIORITY        6
+#define STM32_IRQ_EXTI33_PRIORITY           6
+#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY   7
+#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY    7
+#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
+#define STM32_IRQ_TIM1_CC_PRIORITY          7
 
 /*
  * ADC driver system settings.
@@ -115,25 +135,6 @@
 #define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
 
 /*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
-#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
-
-/*
  * GPT driver system settings.
  */
 #define STM32_GPT_USE_TIM1                  FALSE
@@ -143,6 +144,9 @@
 #define STM32_GPT_USE_TIM6                  TRUE
 #define STM32_GPT_USE_TIM7                  TRUE
 #define STM32_GPT_USE_TIM8                  TRUE
+#define STM32_GPT_USE_TIM15                 FALSE
+#define STM32_GPT_USE_TIM16                 FALSE
+#define STM32_GPT_USE_TIM17                 FALSE
 #define STM32_GPT_TIM1_IRQ_PRIORITY         7
 #define STM32_GPT_TIM2_IRQ_PRIORITY         7
 #define STM32_GPT_TIM3_IRQ_PRIORITY         7
@@ -172,6 +176,7 @@
 #define STM32_ICU_USE_TIM3                  FALSE
 #define STM32_ICU_USE_TIM4                  FALSE
 #define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_USE_TIM15                 FALSE
 #define STM32_ICU_TIM1_IRQ_PRIORITY         7
 #define STM32_ICU_TIM2_IRQ_PRIORITY         7
 #define STM32_ICU_TIM3_IRQ_PRIORITY         7
@@ -187,6 +192,9 @@
 #define STM32_PWM_USE_TIM3                  TRUE
 #define STM32_PWM_USE_TIM4                  FALSE
 #define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_USE_TIM15                 FALSE
+#define STM32_PWM_USE_TIM16                 FALSE
+#define STM32_PWM_USE_TIM17                 FALSE
 #define STM32_PWM_TIM1_IRQ_PRIORITY         7
 #define STM32_PWM_TIM2_IRQ_PRIORITY         7
 #define STM32_PWM_TIM3_IRQ_PRIORITY         7
@@ -194,6 +202,14 @@
 #define STM32_PWM_TIM8_IRQ_PRIORITY         7
 
 /*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_PRESA_VALUE               32
+#define STM32_RTC_PRESS_VALUE               1024
+#define STM32_RTC_CR_INIT                   0
+#define STM32_RTC_TAMPCR_INIT               0
+
+/*
  * SERIAL driver system settings.
  */
 #define STM32_SERIAL_USE_USART1             FALSE